@article{Fissabre2011,
  author    = {Fissabre, Anke},
  title     = {Dachterrassen der Renaissance - „Cosa pi{\`u} maravigliosa che gl'orti pensili di Babbilonia"},
  series = {Architectura : Zeitschrift f{\"u}r Geschichte der Baukunst},
  volume    = {41},
  journal   = {Architectura : Zeitschrift f{\"u}r Geschichte der Baukunst},
  number    = {1},
  publisher = {De Gruyter},
  address   = {Berlin},
  issn      = {0044-863X},
  pages     = {27 -- 46},
  year      = {2011},
  language  = {de}
}
@article{FissabreLohmann2012,
  author    = {Fissabre, Anke and Lohmann, Daniel},
  title     = {Verlust einer „tragenden Wand" : Das Haus der Jugend von Rudolf Schwarz in Aachen},
  series = {Bauwelt},
  volume    = {103},
  journal   = {Bauwelt},
  number    = {45},
  publisher = {Bauverlag BV},
  address   = {G{\"u}tersloh},
  issn      = {0005-6855},
  pages     = {6 -- 7},
  year      = {2012},
  language  = {de}
}
@article{Fissabre2013,
  author    = {Fissabre, Anke},
  title     = {Residenzarchitektur des Kurf{\"u}rstenpaares August und Anna von Sachsen als Ausdruck musterhafter Landeskultivierung - Das Renaissanceschloss Lichtenburg},
  series = {Mitteilungen der Residenzen-Kommission der Akademie der Wissenschaften zu G{\"o}ttingen, Neue Folge, Stadt und Hof},
  volume    = {2},
  journal   = {Mitteilungen der Residenzen-Kommission der Akademie der Wissenschaften zu G{\"o}ttingen, Neue Folge, Stadt und Hof},
  issn      = {0941-0937},
  pages     = {40 -- 59},
  year      = {2013},
  language  = {de}
}
@article{FrotscherKochStaat2015,
  author    = {Frotscher, Ralf and Koch, Jan-Peter and Staat, Manfred},
  title     = {Computational investigation of drug action on human-induced stem cell derived cardiomyocytes},
  series = {Journal of biomechanical engineering},
  volume    = {Vol. 137},
  journal   = {Journal of biomechanical engineering},
  number    = {iss. 7},
  publisher = {ASME},
  address   = {New York},
  issn      = {1528-8951 (E-Journal); 0148-0731 (Print)},
  doi       = {10.1115/1.4030173},
  pages     = {071002-1 -- 071002-7},
  year      = {2015},
  language  = {en}
}
@article{Fissabre2015,
  author    = {Fissabre, Anke},
  title     = {Konstruktion und Raumform im Kirchenbau der Moderne : Die L{\"a}ngsbinderkirchen von Hans Herkommer},
  series = {In situ : Zeitschrift f{\"u}r Architekturgeschichte},
  volume    = {7},
  journal   = {In situ : Zeitschrift f{\"u}r Architekturgeschichte},
  number    = {1},
  publisher = {Wernersche Verlagsgesellschaft},
  address   = {Worms},
  issn      = {1866-959X},
  pages     = {117 -- 124},
  year      = {2015},
  language  = {de}
}
@article{Timme2015,
  author    = {Timme, Michael},
  title     = {K{\"u}ndigung - Die Vorhersehbarkeit eines zuk{\"u}nftigen Eigenbedarfs f{\"u}r den Vermieter},
  series = {Monatsschrift f{\"u}r Deutsches Recht : MDR : Zeitschrift f{\"u}r die Zivilrechts-Praxis},
  volume    = {69},
  journal   = {Monatsschrift f{\"u}r Deutsches Recht : MDR : Zeitschrift f{\"u}r die Zivilrechts-Praxis},
  number    = {9},
  publisher = {Verlag Dr. Otto Schmidt},
  address   = {K{\"o}ln},
  issn      = {0340-1812},
  pages     = {489 -- 490},
  year      = {2015},
  language  = {de}
}
@article{Helmig2015,
  author    = {Helmig, Ilka},
  title     = {A few (hi)stories about french illustration},
  series = {Slanted},
  journal   = {Slanted},
  number    = {25 (Paris)},
  publisher = {Slanted Publishers},
  address   = {Karlsruhe},
  issn      = {1867-6510},
  pages     = {210 -- 217},
  year      = {2015},
  language  = {en}
}
@article{Wollert2007,
  author    = {Wollert, J{\"o}rg},
  title     = {Wireless in industriellen Anwendungen},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler ; Sonderh. Scout : Leitfaden f{\"u}r Elektronik-Entwickler},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler ; Sonderh. Scout : Leitfaden f{\"u}r Elektronik-Entwickler},
  issn      = {1863-3420},
  pages     = {40 -- 46},
  year      = {2007},
  language  = {de}
}
@article{Pietsch1987,
  author    = {Pietsch, Wolfram},
  title     = {Qualit{\"a}t in die Wiege gelegt},
  series = {Markt \& Technik : die unabh{\"a}ngige Wochenzeitung f{\"u}r Elektronik},
  journal   = {Markt \& Technik : die unabh{\"a}ngige Wochenzeitung f{\"u}r Elektronik},
  number    = {H. 10},
  issn      = {0344-8843},
  pages     = {58 -- 63},
  year      = {1987},
  language  = {de}
}
@article{KurbelPietsch1987,
  author    = {Kurbel, K. and Pietsch, Wolfram},
  title     = {Projektmanagement bei Expertensystem-Entwicklungen},
  series = {Arbeitsberichte des Lehrstuhls f{\"u}r Betriebsinformatik / Lehrstuhl f{\"u}r Betriebsinformatik, Fachbereich Wirtschafts- und Sozialwissenschaften, Universit{\"a}t Dortmund},
  journal   = {Arbeitsberichte des Lehrstuhls f{\"u}r Betriebsinformatik / Lehrstuhl f{\"u}r Betriebsinformatik, Fachbereich Wirtschafts- und Sozialwissenschaften, Universit{\"a}t Dortmund},
  number    = {H. November},
  pages     = {1 -- 21},
  year      = {1987},
  language  = {de}
}
@article{Pietsch1993,
  author    = {Pietsch, Wolfram},
  title     = {Maßgeschneidertes Training f{\"u}r Software-Engineering und CASE},
  series = {ExperPraxis : ExperTeam-Jahrbuch f{\"u}r die Praxis der Informationsverarbeitung},
  journal   = {ExperPraxis : ExperTeam-Jahrbuch f{\"u}r die Praxis der Informationsverarbeitung},
  issn      = {0944-2863},
  pages     = {15 -- 17},
  year      = {1993},
  language  = {de}
}
@article{Pietsch1993,
  author    = {Pietsch, Wolfram},
  title     = {Verteilte Seminarentwicklung unter Lotus Notes},
  series = {ExperPraxis : ExperTeam-Jahrbuch f{\"u}r die Praxis der Informationsverarbeitung},
  journal   = {ExperPraxis : ExperTeam-Jahrbuch f{\"u}r die Praxis der Informationsverarbeitung},
  issn      = {0944-2863},
  pages     = {69 -- 70},
  year      = {1993},
  language  = {de}
}
@article{GeibelPietsch1994,
  author    = {Geibel, R. and Pietsch, Wolfram},
  title     = {Seminarbibliothek Software-Engineering: CASE ist nicht alles?},
  series = {ExperPraxis : ExperTeam-Jahrbuch f{\"u}r die Praxis der Informationsverarbeitung},
  journal   = {ExperPraxis : ExperTeam-Jahrbuch f{\"u}r die Praxis der Informationsverarbeitung},
  issn      = {0944-2863},
  pages     = {106 -- 108},
  year      = {1994},
  language  = {de}
}
@article{BarthWollert1998,
  author    = {Barth, Heiko and Wollert, J{\"o}rg},
  title     = {SMARTes Konzept - von Produkt zur Fabrik},
  series = {Facility-Management : Integration, Planung, Geb{\"a}udemanagement},
  volume    = {Bd. 4},
  journal   = {Facility-Management : Integration, Planung, Geb{\"a}udemanagement},
  number    = {H. August},
  issn      = {0948-0048},
  pages     = {30 -- 35},
  year      = {1998},
  language  = {de}
}
@article{KotliarLanzl2002,
  author    = {Kotliar, Konstantin and Lanzl, I. M.},
  title     = {Biomechanical modeling of the aqueous humor outflow after non-penetrating glaucoma filtration surgery in the human eye},
  series = {Acta of bioengineering and biomechanics},
  volume    = {Vol. 4},
  journal   = {Acta of bioengineering and biomechanics},
  number    = {Suppl. 1},
  issn      = {1509-409X},
  pages     = {728 -- 729},
  year      = {2002},
  language  = {de}
}
@article{KotliarDrozdovaShamshinova2006,
  author    = {Kotliar, Konstantin and Drozdova, G. A. and Shamshinova, A. M.},
  title     = {Ocular hemodinamics and contemporary methods of its assessment.
 Part I. Ocular blood circulation and its quantitative estimation},
  series = {National journal Glaucoma},
  volume    = {Vol. 5},
  journal   = {National journal Glaucoma},
  number    = {No. 3},
  issn      = {2078-4104},
  pages     = {62 -- 73},
  year      = {2006},
  language  = {ru}
}
@article{Wollert2008,
  author    = {Wollert, J{\"o}rg},
  title     = {Bluetooth in der Klemme},
  series = {Computer \& Automation : Fachmedium der Automatisierungstechnik},
  journal   = {Computer \& Automation : Fachmedium der Automatisierungstechnik},
  number    = {H. 10},
  issn      = {1615-8512},
  pages     = {62 -- 67},
  year      = {2008},
  language  = {de}
}
@article{Wollert1996,
  author    = {Wollert, J{\"o}rg},
  title     = {Zeitgem{\"a}ß : Echtzeit-Zusatz f{\"u}r Windows 3.11 und Windows 95},
  series = {ELRAD : Magazin f{\"u}r Elektronik und technische Rechneranwendungen},
  journal   = {ELRAD : Magazin f{\"u}r Elektronik und technische Rechneranwendungen},
  number    = {H. 9},
  issn      = {0170-1827},
  pages     = {96 -- 99},
  year      = {1996},
  language  = {de}
}
@article{Wollert1997,
  author    = {Wollert, J{\"o}rg},
  title     = {Wieviel Echtzeit kann Windows?},
  series = {IEE : elektrische Automatisierung und Antriebstechnik},
  volume    = {Jg. 42},
  journal   = {IEE : elektrische Automatisierung und Antriebstechnik},
  number    = {Nr. 9},
  issn      = {1434-2898},
  pages     = {30 -- 37},
  year      = {1997},
  language  = {de}
}
@article{KotliarDrozdovaShamshinova2006,
  author    = {Kotliar, Konstantin and Drozdova, G. A. and Shamshinova, A. M.},
  title     = {Ocular hemodinamics and contemporary methods of its assessment. Part II. Invasive methods of assessment of ocular blood flow},
  series = {National Journal Glaucoma},
  volume    = {Vol. 5},
  journal   = {National Journal Glaucoma},
  number    = {No. 4},
  issn      = {2078-4104},
  pages     = {37 -- 49},
  year      = {2006},
  language  = {ru}
}
@article{KotliarDrozdovaShamshinova2007,
  author    = {Kotliar, Konstantin and Drozdova, G. A. and Shamshinova, A. M.},
  title     = {Ocular hemodinamics and contemporary methods of its assessment. Part III. Non-invasive methods of assessment of ocular blood flow. 1. Assessment of blood cell velocities and flow rates in intraocular vessels and vascular beds},
  series = {Journal of Glaucoma},
  volume    = {Vol. 6},
  journal   = {Journal of Glaucoma},
  number    = {1},
  issn      = {2078-4104},
  pages     = {61 -- 68},
  year      = {2007},
  language  = {ru}
}
@article{KotliarDrozdovaShamshinova2007,
  author    = {Kotliar, Konstantin and Drozdova, G. A. and Shamshinova, A. M.},
  title     = {Ocular hemodinamics and contemporary methods of its assessment. Part III. Non-invasive methods of assessment of ocular blood flow. 2. Static and dynamic assessment of retinal vessel reaction to stimuli},
  series = {National Journal Glaucoma},
  volume    = {Vol. 6},
  journal   = {National Journal Glaucoma},
  number    = {No. 2},
  issn      = {2078-4104},
  pages     = {64 -- 71},
  year      = {2007},
  language  = {ru}
}
@article{KappmeyerKotliarLanzl2009,
  author    = {Kappmeyer, K. and Kotliar, Konstantin and Lanzl, I. M.},
  title     = {Spielen von Blasinstrumenten und Augeninnendruck},
  series = {Zeitschrift f{\"u}r praktische Augenheilkunde \& augen{\"a}rztliche Fortbildung : ZPA},
  volume    = {Bd. 30},
  journal   = {Zeitschrift f{\"u}r praktische Augenheilkunde \& augen{\"a}rztliche Fortbildung : ZPA},
  issn      = {1436-0322},
  pages     = {169 -- 171},
  year      = {2009},
  language  = {de}
}
@article{KotliarKharoubiSchmidtTrucksaessetal.2009,
  author    = {Kotliar, Konstantin and Kharoubi, A. and Schmidt-Trucks{\"a}ß, A. and Halle, M. and Lanzl, I.},
  title     = {Does internal longitudinal microstructure of retinal veins change with age in medically healthy persons?},
  series = {Acta Ophthalmologica},
  volume    = {Vol. 87},
  journal   = {Acta Ophthalmologica},
  number    = {Suppl. S244},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1600-0420 (E-Journal); 1755-3768 (E-Journal); 0001-639X (Print); 1395-3907 (Print); 1755-375X (Print)},
  pages     = {0},
  year      = {2009},
  language  = {en}
}
@article{MartinGonzalezKotliarRiosMartinezetal.2014,
  author    = {Martin-Gonzalez, Anabel and Kotliar, Konstantin and Rios-Martinez, Jorge and Lanzl, Ines and Navab, Nassir},
  title     = {Mediated-reality magnification for macular degeneration rehabilitation},
  series = {Journal of Modern Optics},
  volume    = {61},
  journal   = {Journal of Modern Optics},
  number    = {17},
  publisher = {Taylor \& Francis},
  address   = {London},
  issn      = {1362-3044},
  doi       = {10.1080/09500340.2014.936110},
  pages     = {1400 -- 1408},
  year      = {2014},
  language  = {en}
}
@article{Wollert2001,
  author    = {Wollert, J{\"o}rg},
  title     = {Bluetooth aktuell - Technik und Anwendungen ; 4: Der Bluetooth Protokoll-Stack},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  volume    = {Jg. 50},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {Nr. 20},
  issn      = {0013-5658},
  pages     = {76 -- 81},
  year      = {2001},
  language  = {de}
}
@article{Wollert1995,
  author    = {Wollert, J{\"o}rg},
  title     = {Euros - 166 - Echtzeitentwicklungskit f{\"u}r den 80C166},
  series = {ELRAD : Magazin f{\"u}r Elektronik und technische Rechneranwendungen},
  journal   = {ELRAD : Magazin f{\"u}r Elektronik und technische Rechneranwendungen},
  number    = {H. 8},
  issn      = {0170-1827},
  pages     = {32 -- 34},
  year      = {1995},
  language  = {de}
}
@article{WollertFiedlerStockmann1994,
  author    = {Wollert, J{\"o}rg and Fiedler, J. and Stockmann, T.},
  title     = {Automatisieren mit dem PC : was der Personal Computer kann und wo er passen muss},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {Nr. 6},
  issn      = {0013-5658},
  pages     = {76 -- 82},
  year      = {1994},
  language  = {de}
}
@article{Wollert1995,
  author    = {Wollert, J{\"o}rg},
  title     = {Zeitsprung : Grundlagen und Markt{\"u}bersicht zu Echtzeit-Betriebssystemen},
  series = {ELRAD : Magazin f{\"u}r Elektronik und technische Rechneranwendungen},
  journal   = {ELRAD : Magazin f{\"u}r Elektronik und technische Rechneranwendungen},
  number    = {H. 6},
  issn      = {0170-1827},
  pages     = {48 -- 59},
  year      = {1995},
  language  = {de}
}
@article{GoebelGeskesGeyeretal.1997,
  author    = {Goebel, O. and Geskes, P. and Geyer, Michael and Henneke, K. and Herrmann, Ulf},
  title     = {Direkte Dampferzeugung in Parabolrinnen-Solarkraftwerken},
  series = {Strom aus Sonne und Wind. - (Themen / Forschungsverbund Sonnenenergie ; 96/97)},
  journal   = {Strom aus Sonne und Wind. - (Themen / Forschungsverbund Sonnenenergie ; 96/97)},
  publisher = {Forschungsverb Sonnenenergie},
  address   = {K{\"o}ln},
  issn      = {0939-7582},
  pages     = {110 -- 116},
  year      = {1997},
  language  = {de}
}
@article{HerrmannLippke1999,
  author    = {Herrmann, Ulf and Lippke, F.},
  title     = {The influence of transients on the design of DSG solar fields},
  series = {Journal de Physique IV : proceedings},
  volume    = {9},
  journal   = {Journal de Physique IV : proceedings},
  number    = {PR3},
  isbn      = {2-86883-402-7},
  issn      = {1764-7177 (Online)},
  doi       = {10.1051/jp4:1999377},
  pages     = {489 -- 494},
  year      = {1999},
  language  = {en}
}
@article{BreuerRaueKirschbaumetal.2015,
  author    = {Breuer, Lars and Raue, Markus and Kirschbaum, M. and Mang, Thomas and Sch{\"o}ning, Michael Josef and Thoelen, R. and Wagner, Torsten},
  title     = {Light-controllable polymeric material based on temperature-sensitive hydrogels with incorporated graphene oxide},
  series = {Physica status solidi (a)},
  volume    = {212},
  journal   = {Physica status solidi (a)},
  number    = {6},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1862-6319},
  doi       = {10.1002/pssa.201431944},
  pages     = {1368 -- 1374},
  year      = {2015},
  abstract  = {Poly(N-isopropylacrylamide) (PNIPAAm) hydrogel films with incorporated graphene oxide (GO) were developed and tested as light-stimulated actuators. GO dispersions were synthesized via Hummers method and characterized toward their optical properties and photothermal energy conversion. The hydrogels were prepared by means of photopolymerization. In addition, the influence of GO within the hydrogel network on the lower critical solution temperature (LCST) was investigated by differential scanning calorimetry (DSC). The optical absorbance and the response to illumination were determined as a function of GO concentration for thin hydrogel films. A proof of principle for the stimulation with light was performed.},
  language  = {en}
}
@article{SchifferFerreinLakemeyer2015,
  author    = {Schiffer, Stefan and Ferrein, Alexander and Lakemeyer, Gerhard},
  title     = {Abstracting Away Low-Level Details in Service Robotics with Fuzzy Fluents},
  series = {Model-Driven Knowledge Engineering for Improved Software Modularity in Robotics and Automation. Workshop at European Robotics Forum 2015 Vienna, Austria, March 11-13, 2015.},
  journal   = {Model-Driven Knowledge Engineering for Improved Software Modularity in Robotics and Automation. Workshop at European Robotics Forum 2015 Vienna, Austria, March 11-13, 2015.},
  pages     = {1 -- 4},
  year      = {2015},
  language  = {en}
}
@article{PilasIkenSelmeretal.2015,
  author    = {Pilas, Johanna and Iken, Heiko and Selmer, Thorsten and Keusgen, Michael and Sch{\"o}ning, Michael Josef},
  title     = {Development of a multi-parameter sensor chip for the simultaneous detection of organic compounds in biogas processes},
  series = {Physica status solidi (a)},
  volume    = {212},
  journal   = {Physica status solidi (a)},
  number    = {6},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1862-6319},
  doi       = {10.1002/pssa.201431894},
  pages     = {1306 -- 1312},
  year      = {2015},
  abstract  = {An enzyme-based multi-parameter biosensor is developed for monitoring the concentration of formate, d-lactate, and l-lactate in biological samples. The sensor is based on the specific dehydrogenation by an oxidized β-nicotinamide adenine dinucleotide (NAD+)-dependent dehydrogenase (formate dehydrogenase, d-lactic dehydrogenase, and l-lactic dehydrogenase, respectively) in combination with a diaphorase from Clostridium kluyveri (EC 1.8.1.4). The enzymes are immobilized on a platinum working electrode by cross-linking with glutaraldehyde (GA). The principle of the determination scheme in case of l-lactate is as follows: l-lactic dehydrogenase (l-LDH) converts l-lactate into pyruvate by reaction with NAD+. In the presence of hexacyanoferrate(III), the resulting reduced β-nicotinamide adenine dinucleotide (NADH) is then regenerated enzymatically by diaphorase. The electrochemical detection is based on the current generated by oxidation of hexacyanoferrate(II) at an applied potential of +0.3 V vs. an Ag/AgCl reference electrode. The biosensor will be electrochemically characterized in terms of linear working range and sensitivity. Additionally, the successful practical application of the sensor is demonstrated in an extract from maize silage.},
  language  = {en}
}
@article{SchneiderSchneiderMeinhardtetal.2015,
  author    = {Schneider, Wilhelm and Schneider, Bettina and Meinhardt, Kerstin and Kinder, Stephanie},
  title     = {Die Fallstudie : Ermittlung des k{\"o}rperschaftssteuerlichen Einkommens und des Gewerbeertrags einer Kapitalgesellschaft},
  series = {Das Wirtschaftsstudium : wisu ; Zeitschrift f{\"u}r Ausbildung, Examen, Berufseinstieg und Fortbildung},
  volume    = {44},
  journal   = {Das Wirtschaftsstudium : wisu ; Zeitschrift f{\"u}r Ausbildung, Examen, Berufseinstieg und Fortbildung},
  number    = {3},
  publisher = {Lange},
  address   = {D{\"u}sseldorf},
  issn      = {0340-3084},
  pages     = {295 -- 298},
  year      = {2015},
  language  = {de}
}
@article{DerschGeyerHerrmannetal.2004,
  author    = {Dersch, J{\"u}rgen and Geyer, Michael and Herrmann, Ulf and Jones, Scott A. and Kelly, Bruce and Kistner, Rainer and Ortmanns, Winfried and Pitz-Paal, Robert and Price, Henry},
  title     = {Trough integration into power plants—a study on the performance and economy of integrated solar combined cycle systems},
  series = {Energy : the international journal},
  volume    = {29},
  journal   = {Energy : the international journal},
  number    = {5-6 (Special Issue SolarPaces)},
  issn      = {0360-5442},
  doi       = {10.1016/S0360-5442(03)00199-3},
  pages     = {947 -- 959},
  year      = {2004},
  language  = {en}
}
@article{KearneyKellyHerrmannetal.2002,
  author    = {Kearney, David W. and Kelly, Bruce and Herrmann, Ulf and Cable, R. and Pacheco, J. and Mahoney, R. and Price, Henry and Blake, D. and Nava, P. and Potrovitza, N.},
  title     = {Engineering Aspects of a Molten Salt Heat Transfer Fluid in a Trough Solar Field},
  series = {Energy : the international journal},
  volume    = {29},
  journal   = {Energy : the international journal},
  number    = {5-6 (Special Issue SolarPaces)},
  issn      = {0360-5442},
  doi       = {10.1016/S0360-5442(03)00191-9},
  pages     = {861 -- 870},
  year      = {2002},
  language  = {en}
}
@article{HerrmannKellyPrice2002,
  author    = {Herrmann, Ulf and Kelly, Bruce and Price, Henry},
  title     = {Two Tank Molten Salt Storage for Parabolic Trough Solar Power Plants},
  series = {Energy : the international journal},
  volume    = {29},
  journal   = {Energy : the international journal},
  number    = {5-6 (Special Issue SolarPaces)},
  issn      = {0360-5442},
  doi       = {10.1016/S0360-5442(03)00193-2},
  pages     = {883 -- 893},
  year      = {2002},
  language  = {en}
}
@article{HerrmannNava2005,
  author    = {Herrmann, Ulf and Nava, P.},
  title     = {Die Strahlung der Sonne einfangen},
  series = {DLR-Nachrichten / Deutsches Zentrum f{\"u}r Luft- und Raumfahrt},
  volume    = {109},
  journal   = {DLR-Nachrichten / Deutsches Zentrum f{\"u}r Luft- und Raumfahrt},
  number    = {Sonderheft Solarforschung},
  issn      = {0937-0420},
  pages     = {34 -- 37},
  year      = {2005},
  language  = {de}
}
@article{HerrmannKearney2002,
  author    = {Herrmann, Ulf and Kearney, David W.},
  title     = {Survey of Thermal Energy Storage for Parabolic Trough Power Plants},
  series = {Journal of Solar Energy Engineering},
  volume    = {124},
  journal   = {Journal of Solar Energy Engineering},
  number    = {2},
  issn      = {1528-8986 (Online)},
  doi       = {10.1115/1.1467601},
  pages     = {145 -- 152},
  year      = {2002},
  language  = {en}
}
@article{JildehWagnerSchoeningetal.2015,
  author    = {Jildeh, Zaid B. and Wagner, Torsten and Sch{\"o}ning, Michael Josef and Pieper, Martin},
  title     = {Simulating the electromagnetic-thermal treatment of thin aluminium layers for adhesion improvement},
  series = {Physica status solidi (a)},
  volume    = {Vol. 212},
  journal   = {Physica status solidi (a)},
  number    = {6},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1862-6319},
  doi       = {10.1002/pssa.201431893},
  pages     = {1234 -- 1241},
  year      = {2015},
  abstract  = {A composite layer material used in packaging industry is made from joining layers of different materials using an adhesive. An important processing step in the production of aluminium-containing composites is the surface treatment and consequent coating of adhesive material on the aluminium surface. To increase adhesion strength between aluminium layer and the adhesive material, the foil is heat treated. For efficient heating, induction heating was considered as state-of-the-art treatment process. Due to the complexity of the heating process and the unpredictable nature of the heating source, the control of the process is not yet optimised. In this work, a finite element analysis of the process was established and various process parameters were studied. The process was simplified and modelled in 3D. The numerical model contains an air domain, an aluminium layer and a copper coil fitted with a magnetic field concentrating material. The effect of changing the speed of the aluminium foil (or rolling speed) was studied with the change of the coil current. Statistical analysis was used for generating a general control equation of coil current with changing rolling speed.},
  language  = {en}
}
@article{HuckPoghossianBaeckeretal.2015,
  author    = {Huck, Christina and Poghossian, Arshak and B{\"a}cker, Matthias and Reisert, Steffen and Kramer, Friederike and Begoyan, Vardges K. and Buniatyan, Vahe V. and Sch{\"o}ning, Michael Josef},
  title     = {Multi-parameter sensing using high-k oxide of barium strontium titanate},
  series = {Physica status solidi (a)},
  volume    = {212},
  journal   = {Physica status solidi (a)},
  number    = {6},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1862-6319},
  doi       = {10.1002/pssa.201431911},
  pages     = {1259},
  year      = {2015},
  abstract  = {High-k perovskite oxide of barium strontium titanate (BST) represents a very attractive multi-functional transducer material for the development of (bio-)chemical sensors. In this work, a Si-based sensor chip containing Pt interdigitated electrodes covered with a thin BST layer (485 nm) has been developed for multi-parameter chemical sensing. The chip has been applied for the contactless measurement of the electrolyte conductivity, the detection of adsorbed charged macromolecules (positively charged polyelectrolytes of polyethylenimine) and the concentration of hydrogen peroxide (H2O2) vapor. The experimental results of functional testing of individual sensors are presented. The mechanism of the BST sensitivity to charged polyelectrolytes and H2O2 vapor has been proposed and discussed.},
  language  = {en}
}
@article{OberlaenderBrommWendeleretal.2015,
  author    = {Oberl{\"a}nder, Jan and Bromm, Alexander and Wendeler, Luisa and Iken, Heiko and Palomar Duran, Marlena and Greeff, Anton and Kirchner, Patrick and Keusgen, Michael and Sch{\"o}ning, Michael Josef},
  title     = {Towards a biosensor to monitor the sterilisation efficiency of aseptic filling machines},
  series = {Physica status solidi (a)},
  volume    = {212},
  journal   = {Physica status solidi (a)},
  number    = {6},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1862-6319},
  doi       = {10.1002/pssa.201431900},
  pages     = {1299 -- 1305},
  year      = {2015},
  abstract  = {Sterilisation processes are compulsory in medicine, pharmacy, and food industries to prevent infections of consumers and microbiological contaminations of products. Monitoring the sterilisation by conventional microbiological methods is time- and lab-consuming. To overcome this problem, in this work a novel biosensor has been proposed. The sensor enables a fast method to evaluate sterilisation processes. By means of thin-film technology the sensor's transducer structures in form of IDEs (interdigitated electrodes) have been fabricated on a silicon substrate. Physical characterisation of the developed sensor was done by AFM, SEM, and profilometry. Impedance analyses were conducted for the electrical characterisation. As microbiological layer spores of B. atrophaeus have been immobilised on the sensing structure; spores of this type are a well-known sterilisation test organism. Impedance measurements at a fixed frequency over time were performed to monitor the immobilisation process. A sterilisation process according to aseptic filling machines was applied to demonstrate the sensor functionality. After both, immobilisation and sterilisation, a change in impedance could successfully be detected.},
  language  = {en}
}
@article{Wollert2000,
  author    = {Wollert, J{\"o}rg},
  title     = {Ethernet in der Automatisierungstechnik ; 1: Herk{\"o}mmliche Feldbusse im Vergleich zu Ethernet},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  volume    = {Bd. 49},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {H. 15},
  issn      = {0013-5658},
  pages     = {68 -- 77},
  year      = {2000},
  language  = {de}
}
@article{Alexopoulos2015,
  author    = {Alexopoulos, Spiros},
  title     = {Simulation model for the transient process behaviour of solar aluminium recycling in a rotary kiln},
  series = {Applied Thermal Engineering},
  volume    = {78},
  journal   = {Applied Thermal Engineering},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1359-4311},
  doi       = {10.1016/j.applthermaleng.2015.01.007},
  pages     = {387 -- 396},
  year      = {2015},
  language  = {en}
}
@article{HuberStreblowMuelleretal.2014,
  author    = {Huber, M. and Streblow, R. and M{\"u}ller, D. and Lange, S. and Joneleit, R. and Sefker, T. and Rau, Sebastian and Wollert, J{\"o}rg},
  title     = {Funksignal{\"u}bertragung in Luftleitungen},
  series = {HLH : L{\"u}ftung, Klima, Heizung, Sanit{\"a}r, Geb{\"a}udetechnik},
  volume    = {Bd. 65},
  journal   = {HLH : L{\"u}ftung, Klima, Heizung, Sanit{\"a}r, Geb{\"a}udetechnik},
  number    = {H. 7/8},
  issn      = {1436-5103},
  pages     = {36 -- 40},
  year      = {2014},
  language  = {de}
}
@article{HeptnerWollert2005,
  author    = {Heptner, K. and Wollert, J{\"o}rg},
  title     = {FML-Report - VDI-Richtlinie 4485 'E-Commerce und Logistik'},
  series = {Logistik f{\"u}r Unternehmen : das Fachmagazin der internen und externen Logistik},
  volume    = {19},
  journal   = {Logistik f{\"u}r Unternehmen : das Fachmagazin der internen und externen Logistik},
  issn      = {0930-7834},
  pages     = {58 -- 59},
  year      = {2005},
  language  = {de}
}
@article{Wollert1999,
  author    = {Wollert, J{\"o}rg},
  title     = {Schlaue Produktion von smarten Autos : hinter der Smart-Produktion steckt ein innovatives Logistikkonzept},
  series = {Technica},
  volume    = {Bd. 48},
  journal   = {Technica},
  number    = {H. 4},
  issn      = {0040-866X},
  pages     = {20 -- 23},
  year      = {1999},
  language  = {de}
}
@article{WollertBuda2009,
  author    = {Wollert, J{\"o}rg and Buda, Aurel},
  title     = {Funkl{\"o}sungen im parallelen Betrieb},
  series = {Intelligenter produzieren : die Wissensplattform f{\"u}r das technische Management},
  journal   = {Intelligenter produzieren : die Wissensplattform f{\"u}r das technische Management},
  number    = {H. 4},
  publisher = {VDMA-Verl.},
  address   = {Frankfurt, M.},
  issn      = {1869-2745},
  pages     = {6 -- 8},
  year      = {2009},
  language  = {de}
}
@article{LeidingerNoistenWollert2012,
  author    = {Leidinger, Rafael and Noisten, Thomas and Wollert, J{\"o}rg},
  title     = {Realtime automation networks in moVing industrial environments},
  series = {Journal of systemics, cybernetics and informatics},
  volume    = {Vol. 10},
  journal   = {Journal of systemics, cybernetics and informatics},
  number    = {Iss. 2},
  publisher = {IIIC},
  address   = {Orlando},
  issn      = {1690-4532},
  pages     = {52 -- 56},
  year      = {2012},
  abstract  = {The radio-based wireless data communication has made the realization of new technical solutions possible in many fields of the automation technology (AT). For about ten years, a constant disproportionate growth of wireless technologies can be observed in the automation technology. However, it shows that especially for the AT, conventional technologies of office automation are unsuitable and/or not manageable. The employment of mobile services in the industrial automation technology has the potential of significant cost and time savings. This leads to an increased productivity in various fields of the AT, for example in the factory and process automation or in production logistics. In this paper technologies and solutions for an automation-suited supply of mobile wireless services will be introduced under the criteria of real time suitability, IT-security and service orientation. Emphasis will be put on the investigation and development of wireless convergence layers for different radio technologies, on the central provision of support services for an easy-to-use, central, backup enabled management of combined wired / wireless networks and on the study on integrability in a Profinet real-time Ethernet network.},
  language  = {en}
}