@article{LeimenaArtmannDachwaldetal.2010,
  author    = {Leimena, W. and Artmann, Gerhard and Dachwald, Bernd and Temiz Artmann, Ayseg{\"u}l and Gossmann, Matthias and Digel, Ilya},
  title     = {Feasibility of an in-situ microbial decontamination of an ice-melting probe},
  series = {Eurasian Chemico-Technological Journal},
  volume    = {12},
  journal   = {Eurasian Chemico-Technological Journal},
  number    = {2},
  publisher = {Institute of Combustion Problems},
  address   = {Almaty},
  isbn      = {1562-3920},
  doi       = {10.18321/ectj37},
  pages     = {145 -- 150},
  year      = {2010},
  abstract  = {Autonomous robotic systems for penetrating thick ice shells with simultaneous collecting of scientific data are very promising devices in both terrestrial (glacier, climate research) and extra-terrestrial applications. Technical challenges in development of such systems are numerous and include 3D-navigation, an appropriate energy source, motion control, etc. Not less important is the problem of forward contamination of the pristine glacial environments with microorganisms and biomolecules from the surface of the probe. This study was devoted to establishing a laboratory model for microbial contamination of a newly constructed ice-melting probe called IceMole and to analyse the viability and amount of the contaminating microorganisms as a function of distance. The used bacterial strains were Bacillus subtilis (ATCC 6051) and Escherichia coli (ATCC 11775). The main objective was development of an efficient and reliable in-situ decontamination method of the melting probe. Therefore, several chemical substances were tested in respect of their efficacy to eliminate bacteria on the surface of the melting probe at low temperature (0 - 5 °C) and at continuous dilution by melted water. Our study has shown that at least 99.9\% decontamination of the IceMole can be successfully achieved by the injection of 30\% (v/v) hydrogen peroxide and 3\% (v/v) sodium hypochlorite into the drilling site. We were able to reproduce this result in both time-dependent and depth-dependent experiments. The sufficient amount of 30\% (v/v) H₂O₂ or 3\% (v/v) NaClO has been found to be approximately 18 L per cm² of the probe's surface.},
  language  = {en}
}
@article{PoghossianMalzahnAbouzaretal.2011,
  author    = {Poghossian, Arshak and Malzahn, K. and Abouzar, Maryam H. and Mehndiratta, P. and Katz, E. and Sch{\"o}ning, Michael Josef},
  title     = {Integration of biomolecular logic gates with field-effect transducers},
  series = {Electrochimica Acta. 56 (2011), H. 26},
  journal   = {Electrochimica Acta. 56 (2011), H. 26},
  publisher = {Elsevier},
  address   = {Amsterdam},
  isbn      = {0013-4686},
  pages     = {9661 -- 9665},
  year      = {2011},
  language  = {en}
}
@article{LandersKern2011,
  author    = {Landers, Ernst Ulrich and Kern, Alexander},
  title     = {Future evolution of risk management for structures : Advancement for the future IEC 62305-2 Ed3},
  publisher = {IEEE},
  address   = {New York},
  pages     = {1 -- 6},
  year      = {2011},
  language  = {en}
}
@article{BehnamBeckerWeber2011,
  author    = {Behnam, S. and Becker, A. and Weber, Hans-Joachim},
  title     = {Clinical benefit and cost-efficiency of minimized perfusion circuits for extracorporeal circulation during cardiac surgery},
  series = {Zeitschrift f{\"u}r Herz-, Thorax- und Gef{\"a}ßchirurgie},
  volume    = {25},
  journal   = {Zeitschrift f{\"u}r Herz-, Thorax- und Gef{\"a}ßchirurgie},
  number    = {5},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {0930-9225},
  pages     = {305 -- 306},
  year      = {2011},
  language  = {en}
}
@article{KernSchelthoffMathieu2011,
  author    = {Kern, Alexander and Schelthoff, Christof and Mathieu, Moritz},
  title     = {Calculation of interception efficiencies for airterminations using a dynamic electro-geometrical model},
  publisher = {IEEE},
  address   = {New York},
  pages     = {1 -- 6},
  year      = {2011},
  language  = {en}
}
@article{AminTemizArtmannArtmannetal.2009,
  author    = {Amin, Rashid and Temiz Artmann, Ayseg{\"u}l and Artmann, Gerhard and Lazarovici, Philip and Lelkes, Peter I.},
  title     = {Permeability of an In Vitro Model of Blood Brain Barrier (BBB)},
  series = {13th International Conference on Biomedical Engineering / Lim, Chwee Teck [Ed.]},
  journal   = {13th International Conference on Biomedical Engineering / Lim, Chwee Teck [Ed.]},
  isbn      = {978-3-540-92841-6},
  pages     = {81 -- 84},
  year      = {2009},
  language  = {en}
}
@article{HillgaertnerKappel2006,
  author    = {Hillg{\"a}rtner, Michael and Kappel, U.},
  title     = {Radiating Impedance of Mains Cabling During Emissions Testing},
  series = {EMC Europe 2006 Barcelona : International Symposium on Electromagnetic Compatibility; September 4 - 8, 2006, Campus Nord, Technical University of Catalonia, Barcelona, Spain / [organized by Technical University of Catalonia (UPC) ... Ed. and publ. by: Ferran Silva ...]. - Vol. 1: Proceedings 1},
  journal   = {EMC Europe 2006 Barcelona : International Symposium on Electromagnetic Compatibility; September 4 - 8, 2006, Campus Nord, Technical University of Catalonia, Barcelona, Spain / [organized by Technical University of Catalonia (UPC) ... Ed. and publ. by: Ferran Silva ...]. - Vol. 1: Proceedings 1},
  address   = {Barcelona},
  isbn      = {84-689-9439-1},
  pages     = {17 -- 22},
  year      = {2006},
  language  = {en}
}
@article{HillgaertnerPeier2006,
  author    = {Hillg{\"a}rtner, Michael and Peier, Dirk},
  title     = {Design of a Measurement Setup for the Impedance of Low-Resistance Plate-Conductors in the RF-Range},
  series = {Proceedings of the 10th International Conference on Optimization of Electrical and Electronic Equipment, OPTIM '06, Bra\&\#351;ov, May 18 - 20, 2006 / ed. by The Transilvania University of Bra\&\#351;ov, Faculty of Electrical Engineering and Computer Science. [Ed. Mihai Cernat .\&\#804;] . - Vol. 1: Keynote addresses, electrotechnics},
  journal   = {Proceedings of the 10th International Conference on Optimization of Electrical and Electronic Equipment, OPTIM '06, Bra\&\#351;ov, May 18 - 20, 2006 / ed. by The Transilvania University of Bra\&\#351;ov, Faculty of Electrical Engineering and Computer Science. [Ed. Mihai Cernat .\&\#804;] . - Vol. 1: Keynote addresses, electrotechnics},
  address   = {Bra\&\#351;ov},
  isbn      = {978-973-635703-9},
  pages     = {59 -- 64},
  year      = {2006},
  language  = {en}
}
@article{HillgaertnerStoniesPeieretal.2005,
  author    = {Hillg{\"a}rtner, Michael and Stonies, R. and Peier, D. and Voges, E.},
  title     = {Design of Low Cost Antennas for Reverberation Chambers},
  series = {Proceedings of the 16th International Zurich Symposium on Electromagnetic Compatibility : [EMC Week 2005, Zurich, Switzerland, February 13 - 18 ; technical exhibition on EMC and RF/microwave Measurements and Instrumentation (February 15 - 17)] / [Laboratory for Electromagnetic Fields and Microwave Electronics, Swiss Federal Institute of Technology Zurich]},
  journal   = {Proceedings of the 16th International Zurich Symposium on Electromagnetic Compatibility : [EMC Week 2005, Zurich, Switzerland, February 13 - 18 ; technical exhibition on EMC and RF/microwave Measurements and Instrumentation (February 15 - 17)] / [Laboratory for Electromagnetic Fields and Microwave Electronics, Swiss Federal Institute of Technology Zurich]},
  publisher = {ETH-Zentrum-IFH},
  address   = {Z{\"u}rich},
  isbn      = {3-9521199-9-7},
  pages     = {1 CD-ROM. ; 12 cm},
  year      = {2005},
  language  = {en}
}
@article{DuesGebhardtKallweitetal.1994,
  author    = {Dues, M. and Gebhardt, Andreas and Kallweit, Stephan and Scheffler, T. and Siekmann, H. and Uchiyama, T.},
  title     = {Flow Visualization in a Cavitating Flow},
  series = {Proceedings of the German-Japanese Symposium on Multi-Phase Flow : Karlsruhe, Germany, August 23 - 25, 1994 / comp. by U. M{\"u}ller ...},
  journal   = {Proceedings of the German-Japanese Symposium on Multi-Phase Flow : Karlsruhe, Germany, August 23 - 25, 1994 / comp. by U. M{\"u}ller ...},
  publisher = {Kernforschungszentrum Karlsruhe},
  address   = {Karlsruhe},
  pages     = {391 -- 402},
  year      = {1994},
  language  = {en}
}
@article{KallweitKaminskyRossietal.2005,
  author    = {Kallweit, Stephan and Kaminsky, R. and Rossi, M. and Scalise, L.},
  title     = {PIV Measurements with high temporal Resolution behind Artificial Heart Valves / Kaminsky, R. ; Rossi, M. ; Scalise, L. ; Kallweit, S. ; Verdonck, P.},
  series = {Proceedings of the 6th International Symposium on Particle Image Velocimetry},
  journal   = {Proceedings of the 6th International Symposium on Particle Image Velocimetry},
  publisher = {Caltech},
  address   = {Pasadena, CA},
  year      = {2005},
  language  = {en}
}
@article{GoettscheHoffschmidtSchmitzetal.2009,
  author    = {G{\"o}ttsche, Joachim and Hoffschmidt, Bernhard and Schmitz, Stefan and Sauerborn, Markus},
  title     = {Solar Concentrating Systems Using Small Mirror Arrays / G{\"o}ttsche, Joachim ; Hoffschmidt, Bernhard ; Schmitz, Stefan ; Sauerborn, Markus ; Buck, Reiner ; Teufel, Edgar ; Badst{\"u}bner, Karin ; Ifland, David ; Rebholz, Christian},
  series = {Proceedings of the 2nd International Conference on Energy Sustainability - 2008 : : presented ... August 10 - 14, 2008, Jacksonville, Florida, USA / sponsored by Advanced Energy Systems Division, ASME; Solar Energy Division, ASME},
  journal   = {Proceedings of the 2nd International Conference on Energy Sustainability - 2008 : : presented ... August 10 - 14, 2008, Jacksonville, Florida, USA / sponsored by Advanced Energy Systems Division, ASME; Solar Energy Division, ASME},
  publisher = {ASME},
  address   = {New York, NY},
  isbn      = {9780791843208},
  pages     = {1 -- 5},
  year      = {2009},
  language  = {en}
}
@article{GoettscheGabryschDelahayeetal.2002,
  author    = {G{\"o}ttsche, Joachim and Gabrysch, K. and Delahaye, A. and Schwarzer, Klemens},
  title     = {Solar-Campus Juelich - Energy performance and indoor climate},
  series = {AIVC 23rd conference - EPIC 2002 AIVC (in conjunction with 3rd European Conference on Energy Performance and Indoor Climate in Buildings) - 23-26 October 2002 - Lyon - France - vol 2},
  journal   = {AIVC 23rd conference - EPIC 2002 AIVC (in conjunction with 3rd European Conference on Energy Performance and Indoor Climate in Buildings) - 23-26 October 2002 - Lyon - France - vol 2},
  pages     = {381 -- 386},
  year      = {2002},
  language  = {en}
}
@article{Goettsche1994,
  author    = {G{\"o}ttsche, Joachim},
  title     = {Eldorado summer schools},
  series = {Progress in solar energy education. 3 (1994)},
  journal   = {Progress in solar energy education. 3 (1994)},
  isbn      = {1018-5607},
  pages     = {31 -- 33},
  year      = {1994},
  language  = {en}
}
@article{BehbahaniMaiWalugaetal.2010,
  author    = {Behbahani, Mehdi and Mai, A. and Waluga, C. and Bergmann, B. and Tran, L. and Vonderstein, K. and Behr, Marek and Mottaghy, K.},
  title     = {Numerical Modeling of Flow-Related Thrombus Formation under Physiological and Non-Physiological Flow Conditions},
  series = {Acta Physiologica},
  volume    = {198},
  journal   = {Acta Physiologica},
  number    = {Supplement 677},
  isbn      = {1748-1716},
  pages     = {185},
  year      = {2010},
  language  = {en}
}
@article{BehbahaniWalugaArltetal.2008,
  author    = {Behbahani, Mehdi and Waluga, C. and Arlt, S. and Behr, Marek and Mottaghy, K.},
  title     = {Computational Analysis of Platelet Aggregation in a Taylor-Couette System},
  series = {The International Journal of Artificial Organs. 31 (2008), H. 7},
  journal   = {The International Journal of Artificial Organs. 31 (2008), H. 7},
  isbn      = {0391-3988},
  pages     = {643},
  year      = {2008},
  language  = {en}
}
@article{BehbahaniMaiBergmannetal.2010,
  author    = {Behbahani, Mehdi and Mai, A. and Bergmann, B. and Waluga, C. and Behr, Marek and Tran, L. and Vonderstein, K. and Mottaghy, K.},
  title     = {Modeling and Numerical Simulation of Blood Damage},
  year      = {2010},
  language  = {en}
}
@article{ProbstBehbahaniBorrmannetal.2010,
  author    = {Probst, M. and Behbahani, Mehdi and Borrmann, E. and Elgeti, S. and Nicolai, M. and Behr, Marek},
  title     = {Hemodynamic Modeling for Numerical Analysis and Design of Medical Devices},
  year      = {2010},
  language  = {en}
}
@article{BehbahaniProbstMaietal.2010,
  author    = {Behbahani, Mehdi and Probst, M. and Mai, A. and Behr, Marek and Tran, L. and Vonderstein, K. and Mottaghy, K.},
  title     = {Numerical Prediction of Blood Damage in Biomedical Devices},
  year      = {2010},
  language  = {en}
}
@article{BehbahaniWalugaStocketal.2009,
  author    = {Behbahani, Mehdi and Waluga, C. and Stock, S. and Mai, A. and Bergmann, B. and Behr, Marek and Tran, L. and Vonderstein, K. and Scheidt, H. and Oedekoven, B. and Mottaghy, K.},
  title     = {Modelling and Numerical Analysis of Platelet Reactions and Surface Thrombus Growth},
  year      = {2009},
  language  = {en}
}
@article{JansenBehbahaniLaumenetal.2010,
  author    = {Jansen, S. V. and Behbahani, Mehdi and Laumen, M. and Kaufmann, T. and Hormes, M. and Behr, Marek and Schmitz-Rode, T. and Steinseifer, U.},
  title     = {Investigation of Steady Flow Through a Realistic Model of the Thoracic Human Aorta Using 3D Stereo PIV and CFD-Simulation},
  series = {ASAIO Journal},
  volume    = {56},
  journal   = {ASAIO Journal},
  number    = {2},
  publisher = {Lippincott Williams \& Wilkins},
  address   = {Philadelphia},
  doi       = {10.1097/01.mat.0000369377.65122.a3},
  pages     = {98},
  year      = {2010},
  language  = {en}
}
@article{BehbahaniNamWalugaetal.2010,
  author    = {Behbahani, Mehdi and Nam, J. and Waluga, C. and Behr, Marek and Pasquali, M. and Mottaghy, K.},
  title     = {Modeling and Numerical Analysis of Platelet Activation, Adhesion and Aggregation in Artificial Organs},
  volume    = {56},
  number    = {2},
  publisher = {Lippincott Williams \& Wilkins},
  address   = {Philadelphia},
  doi       = {10.1097/01.mat.0000369377.65122.a3},
  pages     = {85},
  year      = {2010},
  language  = {en}
}
@article{NamAroraBehbahanietal.2010,
  author    = {Nam, J. and Arora, D. and Behbahani, Mehdi and Probst, M. and Benkowski, R. and Behr, Marek and Pasquali, M.},
  title     = {New computational method in hemolysis analysis for artificial heart pump},
  year      = {2010},
  language  = {en}
}
@article{HenneckeSchwarzboezlHoffschmidtetal.2007,
  author    = {Hennecke, Klaus and Schwarzb{\"o}zl, Peter and Hoffschmidt, Bernhard and G{\"o}ttsche, Joachim and Koll, G. and Beuter, M. and Hartz, T.},
  title     = {The solar power tower J{\"u}lich - a solar thermal power plant for test and demonstration of air receiver},
  series = {Solar energy and human settlement : Elektronische Ressource : proceedings of ISES world congress 2007 ; (Vol. I - Vol. V) / [ISES Solar World Congress. ISES, International Solar Energy Society]. D. Yogi Goswami ; Yuwen Zhao},
  journal   = {Solar energy and human settlement : Elektronische Ressource : proceedings of ISES world congress 2007 ; (Vol. I - Vol. V) / [ISES Solar World Congress. ISES, International Solar Energy Society]. D. Yogi Goswami ; Yuwen Zhao},
  publisher = {Tsinghua Univ. Press},
  address   = {Beijing},
  isbn      = {978-7-302-16146-2},
  pages     = {1749 -- 1753},
  year      = {2007},
  language  = {en}
}
@article{BehbahaniTranWalugaetal.2009,
  author    = {Behbahani, Mehdi and Tran, L. and Waluga, C. and Behr, Marek and Oedekoven, B. and Mottaghy, K.},
  title     = {Model-based Numerical Analysis of Platelet Adhesion, Thrombus Growth and Aggregation for Assist Devices},
  series = {The International Journal of Artificial Organs. 32 (2009), H. 7},
  journal   = {The International Journal of Artificial Organs. 32 (2009), H. 7},
  isbn      = {0391-3988},
  pages     = {398 -- 398},
  year      = {2009},
  language  = {en}
}
@article{BehbahaniTranJockenhoeveletal.2011,
  author    = {Behbahani, Mehdi and Tran, L. and Jockenh{\"o}vel, S. and Behr, Marek and Mottaghy, K.},
  title     = {Numerical prediction of thrombocyte reactions for application to a vascular flow model},
  series = {British Journal of Surgery},
  volume    = {98},
  journal   = {British Journal of Surgery},
  number    = {S5},
  publisher = {Oxford University Press},
  address   = {Oxford},
  isbn      = {1365-2168},
  pages     = {S17},
  year      = {2011},
  language  = {en}
}
@article{WagnerMiyamotoWerneretal.2011,
  author    = {Wagner, Torsten and Miyamoto, K. and Werner, Frederik and Sch{\"o}ning, Michael Josef and Yoshinobu, T.},
  title     = {Flexible electrochemical imaging with "zoom-in" functionality by using a new type of light-addressable potentiometric sensor},
  publisher = {IEEE},
  address   = {New York},
  pages     = {2133 -- 2135},
  year      = {2011},
  language  = {en}
}
@article{MiyamotoWagnerSchoeningetal.2011,
  author    = {Miyamoto, K. and Wagner, Torsten and Sch{\"o}ning, Michael Josef and Yoshinobu, T.},
  title     = {Multi-well structure for cell culture on the chemical imaging sensor},
  publisher = {IEEE},
  address   = {New York},
  pages     = {2130 -- 2132},
  year      = {2011},
  language  = {en}
}
@article{GoettscheHoffschmidtAlexopoulosetal.2008,
  author    = {G{\"o}ttsche, Joachim and Hoffschmidt, Bernhard and Alexopoulos, Spiros and Funke, J. and Schwarzb{\"o}zl, P.},
  title     = {First Simulation Results for the Hybridization of Small Solar Power Tower Plants},
  series = {EuroSun 2008 : 1st International Conference on Solar Heating, Cooling and Buildings, 2008-10-07 - 2008-10-10, Lissabon (Portugal). Vol. 1},
  journal   = {EuroSun 2008 : 1st International Conference on Solar Heating, Cooling and Buildings, 2008-10-07 - 2008-10-10, Lissabon (Portugal). Vol. 1},
  publisher = {Sociedade Portuguesa De Energia Solar (SPES)},
  address   = {Lisbon},
  isbn      = {978-1-61782-228-5},
  pages     = {1299 -- 1306},
  year      = {2008},
  language  = {en}
}
@article{GoettscheHinschWittwer1993,
  author    = {G{\"o}ttsche, Joachim and Hinsch, Andreas and Wittwer, Volker},
  title     = {Electrochromic mixed WO3-TiO2 thin films produced by sputtering and the sol-gel technique : a comparison / J. G{\"o}ttsche ; A. Hinsch ; V. Wittwer},
  series = {Solar Energy Materials and Solar Cells. 31 (1993), H. 3},
  journal   = {Solar Energy Materials and Solar Cells. 31 (1993), H. 3},
  isbn      = {0927-0248},
  pages     = {415 -- 428},
  year      = {1993},
  language  = {en}
}
@article{GoettscheReillyWittwer1991,
  author    = {G{\"o}ttsche, Joachim and Reilly, S. and Wittwer, Volker},
  title     = {Advanced window systems and building energy performance / S. Reilly ; J. G{\"o}ttsche ; V. Wittwer},
  series = {Solar World Congress, 1991 : proceedings of the biennial congress of the International Solar Energy Society, Denver, Colorado, USA, 19-23 August 1991 / ed. by M. E. Arden ...},
  journal   = {Solar World Congress, 1991 : proceedings of the biennial congress of the International Solar Energy Society, Denver, Colorado, USA, 19-23 August 1991 / ed. by M. E. Arden ...},
  publisher = {Pergamon Press},
  address   = {Oxford [u.a.]},
  isbn      = {0-08-041690-X},
  pages     = {3211 -- 3216},
  year      = {1991},
  language  = {en}
}
@article{GoettscheHove1999,
  author    = {G{\"o}ttsche, Joachim and Hove, T.},
  title     = {Mapping global, diffuse and beam solar radiation over Zimbabwe / T. Hove ; J. G{\"o}ttsche},
  series = {Renewable energy. 18 (1999), H. 4},
  journal   = {Renewable energy. 18 (1999), H. 4},
  isbn      = {1879-0682},
  pages     = {535 -- 556},
  year      = {1999},
  language  = {en}
}
@article{GoettscheGoetzbergerDengleretal.1992,
  author    = {G{\"o}ttsche, Joachim and Goetzberger, Adolf and Dengler, J. and Rommel, M. (u.a.)},
  title     = {A new transparently insulated, bifacially irradiated solar flat-plate collector / A. Goetzberger ; J. Dengler ; M. Rommel ; J. G{\"o}ttsche ; V. Wittwer},
  series = {Solar energy. 49 (1992), H. 5},
  journal   = {Solar energy. 49 (1992), H. 5},
  isbn      = {0038-092X},
  pages     = {403 -- 411},
  year      = {1992},
  language  = {en}
}
@article{GoettscheHoffschmidtSchmitzetal.2010,
  author    = {G{\"o}ttsche, Joachim and Hoffschmidt, Bernhard and Schmitz, Stefan and Sauerborn, Markus},
  title     = {Solar Concentrating Systems Using Small Mirror Arrays},
  series = {Journal of solar energy engineering},
  volume    = {132},
  journal   = {Journal of solar energy engineering},
  number    = {1},
  publisher = {ASME},
  address   = {New York},
  issn      = {0199-6231},
  doi       = {10.1115/1.4000332},
  pages     = {4 Seiten},
  year      = {2010},
  abstract  = {The cost of solar tower power plants is dominated by the heliostat field making up roughly 50\% of investment costs. Classical heliostat design is dominated by mirrors brought into position by steel structures and drives that guarantee high accuracies under wind loads and thermal stress situations. A large fraction of costs is caused by the stiffness requirements of the steel structure, typically resulting in ~ 20 kg/m² steel per mirror area. The typical cost figure of heliostats (figure mentioned by Solucar at Solar Paces Conference, Seville, 2006) is currently in the area of 150 €/m² caused by the increasing price of the necessary raw materials. An interesting option to reduce costs lies in a heliostat design where all moving parts are protected from wind loads. In this way, drives and mechanical layout may be kept less robust, thereby reducing material input and costs. In order to keep the heliostat at an appropriate size, small mirrors (around 10x10 cm²) have to be used, which are placed in a box with a transparent cover. Innovative drive systems are developed in order to obtain a cost-effective design. A 0,5x0,5 m² demonstration unit will be constructed. Tests of the unit are carried out with a high-precision artificial sun unit that imitates the sun's path with an accuracy of less than 0.5 mrad and creates a beam of parallel light with a divergence of less than 4 mrad.},
  language  = {en}
}
@article{Hillgaertner2010,
  author    = {Hillg{\"a}rtner, Michael},
  title     = {Normative Regulations},
  series = {ECPE Cluster Seminar EMC in Hybrid and Electric Vehicles : 18 May 2010, Fraunhofer Institute Erlangen},
  journal   = {ECPE Cluster Seminar EMC in Hybrid and Electric Vehicles : 18 May 2010, Fraunhofer Institute Erlangen},
  publisher = {European Center for Power Electronics},
  address   = {N{\"u}rnberg},
  pages     = {1 CD-ROM},
  year      = {2010},
  language  = {en}
}
@article{SchaeferHoefkenSchuba2011,
  author    = {Schaefer, Thomas and H{\"o}fken, Hans-Wilhelm and Schuba, Marko},
  title     = {Windows Phone 7 from a Digital Forensics' Perspective},
  publisher = {Springer},
  address   = {Berlin},
  year      = {2011},
  language  = {en}
}
@article{BoernerFunkeHendricketal.2010,
  author    = {B{\"o}rner, Sebastian and Funke, Harald and Hendrick, P. and Recker, E.},
  title     = {Control system modifications for a hydrogen fuelled gas-turbine},
  series = {Proceedings of ISROMAC 13},
  journal   = {Proceedings of ISROMAC 13},
  publisher = {Curran},
  address   = {Red Hook, NY},
  isbn      = {978-1-617-38848-4},
  pages     = {665 -- 670},
  year      = {2010},
  language  = {en}
}
@article{SteinseiferKashefiHormesetal.2009,
  author    = {Steinseifer, Ulrich and Kashefi, Ali and Hormes, Marcus and Schoberer, Mark and Orlikowsky, Thorsten and Behbahani, Mehdi and Behr, Marek and Schmitz-Rode, Thomas},
  title     = {Miniaturization of ECMO Systems : Engineering Challenges and Methods},
  series = {Artificial Organs. 33 (2009), H. 5},
  journal   = {Artificial Organs. 33 (2009), H. 5},
  isbn      = {1525-1594},
  pages     = {A55 -- A55},
  year      = {2009},
  language  = {en}
}
@article{JansenBehbahaniLaumenetal.2010,
  author    = {Jansen, Sebastian and Behbahani, Mehdi and Laumen, Marco and Kaufmann, Tim and Hormes, Marcus and Schmitz-Rode, Thomas and Behr, Marek and Steinseifer, Ulrich},
  title     = {3D Stereo-PIV Validation for CFD-Simulation of Steady Flow through the Human Aorta using Rapid-Prototyping techniques},
  year      = {2010},
  language  = {en}
}
@article{BehbahaniProbstMaietal.2010,
  author    = {Behbahani, Mehdi and Probst, M. and Mai, A. and Tran, L. and Vonderstein, K. and Keschenau, P. and Linde, T. and Steinseifer, U. and Behr, Marek and Mottaghy, K.},
  title     = {The influence of high shear on thrombosis and hemolysis in artificial organs},
  series = {The International Journal of Artificial Organs},
  volume    = {33},
  journal   = {The International Journal of Artificial Organs},
  number    = {7},
  publisher = {Sage},
  address   = {Thousand Oaks},
  issn      = {0391-3988},
  pages     = {426 -- 426},
  year      = {2010},
  language  = {en}
}
@article{BehbahaniBehrAroraetal.2006,
  author    = {Behbahani, Mehdi and Behr, Marek and Arora, D. and Coronado, O. and Pasquali, M.},
  title     = {CFD Analysis of MicroMed Debakey Pump and Hemolysis Prediction / Behbahani, M. ; Behr, M. ; Arora, D. ; Coronado, O. ; Pasquali, M.},
  series = {Artificial Organs. 30 (2006), H. 11},
  journal   = {Artificial Organs. 30 (2006), H. 11},
  isbn      = {1525-1594},
  pages     = {A45 -- A46},
  year      = {2006},
  language  = {en}
}
@article{BehbahaniBehrNicolaietal.2008,
  author    = {Behbahani, Mehdi and Behr, Marek and Nicolai, Mike and Probst, Markus},
  title     = {Towards Shape Optimization for Ventricular Assist Devices Using Parallel Stabilized FEM},
  series = {NIC Symposium 2008 : symposium, 20 - 21 February 2008, Forschungszentrum J{\"u}lich ; proceedings / organized by John von Neumann Institute for Computing. Ed. by Gernot M{\"u}nster; Dietrich Wolf; Manfred Kremer (ed.)},
  journal   = {NIC Symposium 2008 : symposium, 20 - 21 February 2008, Forschungszentrum J{\"u}lich ; proceedings / organized by John von Neumann Institute for Computing. Ed. by Gernot M{\"u}nster; Dietrich Wolf; Manfred Kremer (ed.)},
  publisher = {Forschungszentrum},
  address   = {J{\"u}lich},
  isbn      = {978-3-9810843-5-1},
  pages     = {325 -- 332},
  year      = {2008},
  language  = {en}
}
@article{BehbahaniNicolaiProbstetal.2007,
  author    = {Behbahani, Mehdi and Nicolai, M. and Probst, M. and Behr, Marek},
  title     = {Simulation of Blood Flow in a Ventricular Assist Device},
  series = {inSIDE. 5 (2007), H. 1},
  journal   = {inSIDE. 5 (2007), H. 1},
  pages     = {28 -- 31},
  year      = {2007},
  language  = {en}
}
@article{BehbahaniFinocchiaroHeinkeetal.2009,
  author    = {Behbahani, Mehdi and Finocchiaro, Thomas and Heinke, Stefanie and Leßmann, Marc},
  title     = {Methods of design, simulation, and control for the development of new VAD/TAH concepts = Methoden zur Konstruktion, Simulation und Regelung f{\"u}r die Entwicklung von neuen VAD/TAH-Konzepten / Finocchiaro, Thomas ; Heinke, Stefanie ; Behbahani, Mehdi ; Leßma},
  series = {Biomedizinische Technik / Biomedical Engineering. 54 (2009), H. 5},
  journal   = {Biomedizinische Technik / Biomedical Engineering. 54 (2009), H. 5},
  isbn      = {0013-5585},
  pages     = {269 -- 281},
  year      = {2009},
  language  = {en}
}
@article{BehbahaniBehrHormesetal.2009,
  author    = {Behbahani, Mehdi and Behr, Marek and Hormes, M. and Steinseifer, U. and Arora, D. and Coronado, O. and Pasquali, M.},
  title     = {A Review of Computational Fluid Dynamics Analysis of Blood Pumps},
  series = {European Journal of Applied Mathematics. 20 (2009), H. 4},
  journal   = {European Journal of Applied Mathematics. 20 (2009), H. 4},
  publisher = {Cambridge Univ. Press},
  address   = {Cambridge},
  pages     = {363 -- 397},
  year      = {2009},
  language  = {en}
}
@article{MaiwaldDachwald2010,
  author    = {Maiwald, Volker and Dachwald, Bernd},
  title     = {Mission design for a multiple-rendezvous mission to Jupiter's trojans},
  pages     = {3},
  year      = {2010},
  abstract  = {In this paper, we will provide a feasible mission design for a multiple-rendezvous mission to Jupiter's Trojans. It is based on solar electric propulsion, as being currently used on the DAWN spacecraft, and other flight-proven technology. First, we have selected a set of mission objectives, the prime objective being the detection of water -especially subsurface water -to provide evidence for the Trojans' formation at large solar distances. Based on DAWN and other comparable missions, we have determined suitable payload instruments to achieve these objectives. Afterwards, we have designed a spacecraft that is able to carry the selected payload to the Trojan region and rendezvous successively with three target bodies within a maximum mission duration of 15 years. Accurate low-thrust trajectories have been obtained with a global low-thrust trajectory optimization program (InTrance). During the transfer from Earth to the first target, the spacecraft is propelled by two RIT-22 ion engines from EADS Astrium, whereas a single RIT-15 is used for transfers within the Trojan region to reduce the required power. For power generation, the spacecraft uses a multi-junction solar array that is supported by concentrators. To achieve moderate mission costs, we have restricted the launch mass to a maximum of 1600 kg, the maximum interplanetary injection capability of a Soyuz/Fregat launcher. Our final layout has a mass of 1400 kg, yielding a margin of about 14\%. Nestor (a member of the L4-population) was determined as the first mission target. It can be reached within 4.6 years from launch. The fuel mass ratio for this transfer is about 35\%. The stay time at Nestor is 1.2 years. Eurymedon was selected as the second target (transfer time 3.5 years, stay time 3.0 years) and Irus as the third target (transfer time 2.2 years). The transfers within the Trojan L4-population can be accomplished with fuel mass ratios of about 3\% for each trajectory leg. Including the stay times in orbit around the targets, the mission can be accomplished within a total duration of about 14.5 years. According to our mission analysis, it is also feasible to fly to the L5-population with similar flight times. It has to be noted that -for a first analysis -we have taken only the named targets into account. Allowing also rendezvous with unnamed objects will very likely decrease the mission duration. Based on a scaling of DAWN's mission costs (due to comparable scientific instruments and mission objectives), and taking into account the longer mission duration and the potential re-use of already developed technology, we have estimated that these three rendezvous can be accomplished with a budget of about 250 Million Euros, i.e. about 25\% of ROSETTA's budget.},
  language  = {en}
}
@article{BerretzSkorupaSanderetal.2011,
  author    = {Berretz, Frank and Skorupa, Sascha and Sander, Volker and Belloum, Adam and Bubak, Marian},
  title     = {Actor-Driven Workflow Execution in Distributed Environments},
  series = {Euro-Par 2010 Parallel Processing Workshops : HeteroPAR, HPCC, HiBB, CoreGrid, UCHPC, HPCF, PROPER, CCPI, VHPC ; Ischia, Italy, August 31 - September 3, 2010 ; revised selected papers / Mario R. Guarracino ... (eds.)},
  journal   = {Euro-Par 2010 Parallel Processing Workshops : HeteroPAR, HPCC, HiBB, CoreGrid, UCHPC, HPCF, PROPER, CCPI, VHPC ; Ischia, Italy, August 31 - September 3, 2010 ; revised selected papers / Mario R. Guarracino ... (eds.)},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-642-21877-4},
  pages     = {287 -- 294},
  year      = {2011},
  language  = {en}
}
@article{GeimerSauerbornHoffschmidtetal.2010,
  author    = {Geimer, Konstantin and Sauerborn, Markus and Hoffschmidt, Bernhard and Schmitz, Mark and G{\"o}ttsche, Joachim},
  title     = {Test facility for absorber specimens of solar tower power plants},
  series = {Advances in Science and Technology},
  volume    = {74},
  journal   = {Advances in Science and Technology},
  publisher = {Trans Tech Publications},
  address   = {Baech},
  doi       = {10.4028/www.scientific.net/AST.74.266},
  pages     = {266 -- 271},
  year      = {2010},
  abstract  = {The Solar-Institute J{\"u}lich (SIJ) has initiated the construction of the first and only German solar tower power plant and is now involved in the accompanying research. The power plant for experimental and demonstration purposes in the town of J{\"u}lich started supplying electric energy in the beginning of 2008. The central receiver plant features as central innovation an open volumetric receiver, consisting of porous ceramic elements that simultaneously absorb the concentrated sunlight and transfer the heat to ambient air passing through the pores so that an average temperature of 680°C is reached. The subsequent steam cycle generates up to 1.5 MWe. A main field of research at the SIJ is the optimization of the absorber structures. To analyze the capability of new absorber specimens a special test facility was developed and set up in the laboratory. A high-performance near-infrared radiator offers for single test samples a variable and repeatable beam with a power of up to 320 kW/m² peak. The temperatures achieved on the absorber surface can reach more than 1000°C. To suck ambient air through the open absorber - like on the tower - it is mounted on a special blower system. An overview about the test facility and some recent results will be presented.},
  language  = {en}
}
@article{GebhardtSchmidtHoetteretal.2010,
  author    = {Gebhardt, Andreas and Schmidt, Frank-Michael and H{\"o}tter, Jan-Steffen and Sokalla, Wolfgang and Sokalla, Patrick},
  title     = {Additive manufacturing by selective laser melting the realizer desktop machine and its application for the dental industry},
  series = {Physics Procedia},
  volume    = {5 B},
  journal   = {Physics Procedia},
  number    = {2},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1875-3892},
  doi       = {10.1016/j.phpro.2010.08.082},
  pages     = {543 -- 549},
  year      = {2010},
  abstract  = {Additive Manufacturing of metal parts by Selective Laser Melting has become a powerful tool for the direct manufacturing of complex parts mainly for the aerospace and medical industry. With the introduction of its desktop machine, Realizer targeted the dental market. The contribution describes the special features of the machine, discusses details of the process and shows manufacturing results focused on metal dental devices.},
  language  = {en}
}
@article{KernSchelthoffMathieu2011,
  author    = {Kern, Alexander and Schelthoff, Christof and Mathieu, Moritz},
  title     = {Probability of lightning strikes to air-terminations of structures using the electro-geometrical model theory and the statistics of lightning current parameters},
  series = {Atmospheric Research. 104 (2011)},
  journal   = {Atmospheric Research. 104 (2011)},
  publisher = {Elsevier},
  address   = {Amsterdam},
  isbn      = {0169-8095},
  year      = {2011},
  language  = {en}
}