@inproceedings{DarvenizaFlisowskiKernetal.2002, author = {Darveniza, M. and Flisowski, Z. and Kern, Alexander and Landers, E.-U. and LoPiparo, G. and Mazzetti, C. and Rousseau, A. and Sherlock, J.}, title = {Application problems of the probabilistic approach to the assessment of risk for structures and services}, year = {2002}, abstract = {The paper deals with the development of the probabilistic approach to the assessment of risk due to lightning. Sources of damage, types of damage and types of loss are defined and, accordingly, the procedure for risk analysis and the way of assessment of different risk components is proposed. The way to evaluate the influence of different protection measures (lightning protection system; shielding of structure, cables and equipment; routing of internal wiring; surge protective device) in reducing such probabilities is considered. The paper has been prepared within the framework of the activity of IEC TC81-WG9/CLC TC81-WG4 directed to prepare the draft IEC 62305-2 Risk Management, in cooperation with the Secretary of IEC/CLC TC81.}, language = {en} } @article{DellmannGloriusLitvinovetal.2023, author = {Dellmann, Sophia Florence and Glorius, J. and Litvinov, Yu A. and Reifarth, R. and Al-Khasawneh, Kafa and Aliotta, M. and Bott, L. and Br{\"u}ckner, Benjamin and Bruno, C. G. and Chen, Ruijiu and Davinson, T. and Dickel, T. and Dillmann, Iris and Dmytriev, D. and Erbacher, P. and Freire-Fern{\´a}ndez, D. and Forstner, Oliver and Geissel, H. and G{\"o}bel, K. and Griffin, Christopher J. and Grisenti, R. and Gumberidze, Alexandre and Haettner, Emma and Hagmann, Siegbert and Heil, M. and Heß, R. and Hillenbrand, P.-M. and Joseph, R. and Jurado, B. and Kozhuharov, Christophor and Kulikov, I. and L{\"o}her, Bastian and Langer, Christoph and Leckenby, Guy and Lederer-Woods, C. and Lestinsky, M. and Litvinov, S. A. and Lorenz, B. A. and Lorenz, E. and Marsh, J. and Menz, Esther Babette and Morgenroth, T. and Petridis, N. and Pibernat, Jerome and Popp, U. and Psaltis, Athanasios and Sanjari, Shahab and Scheidenberger, C. and Sguazzin, M. and Sidhu, Ragandeep Singh and Spillmann, Uwe and Steck, M. and St{\"o}hlker, T. and Surzhykov, A. and Swartz, J. A. and T{\"o}rnqvist, H. and Varga, L. and Vescovi, Diego and Weick, H. and Weigand, M. and Woods, P. and Xing, Y. and Yamaguchi, Taiyo}, title = {Proton capture on stored radioactive ¹¹⁸Te ions}, series = {EPJ Web of Conferences}, volume = {279}, journal = {EPJ Web of Conferences}, number = {Article Number: 11018}, publisher = {EDP Sciences}, issn = {2100-014X}, doi = {10.1051/epjconf/202327911018}, pages = {1 -- 5}, year = {2023}, abstract = {Experimental determination of the cross sections of proton capture on radioactive nuclei is extremely difficult. Therefore, it is of substantial interest for the understanding of the production of the p-nuclei. For the first time, a direct measurement of proton-capture cross sections on stored, radioactive ions became possible in an energy range of interest for nuclear astrophysics. The experiment was performed at the Experimental Storage Ring (ESR) at GSI by making use of a sensitive method to measure (p,γ) and (p,n) reactions in inverse kinematics. These reaction channels are of high relevance for the nucleosyn-thesis processes in supernovae, which are among the most violent explosions in the universe and are not yet well understood. The cross section of the ¹¹⁸Te(p,γ) reaction has been measured at energies of 6 MeV/u and 7 MeV/u. The heavy ions interacted with a hydrogen gas jet target. The radiative recombination process of the fully stripped ¹¹⁸Te ions and electrons from the hydrogen target was used as a luminosity monitor. An overview of the experimental method and preliminary results from the ongoing analysis will be presented.}, language = {en} } @inproceedings{Dielmann2002, author = {Dielmann, Klaus-Peter}, title = {Darstellung des Erneuerbaren Energiegesetzes (EEG) und dessen Auswirkungen}, year = {2002}, abstract = {Erneuerbares Energien-Gesetz: Anwendungsbereich, Abnahme- und Verg{\"u}tungspflicht, Verg{\"u}tungss{\"a}tze, Netzkosten, Ausgleichsregelungen Auswirkungen des EEG: Photovoltaik, Windkraft, Biomasse, Wasserkraft, Kl{\"a}r-, Deponie- und Grubengas, Geothermie Zusammenfassung und Ausblick}, subject = {Energierecht}, language = {de} } @inproceedings{Dielmann2001, author = {Dielmann, Klaus-Peter}, title = {Umsetzung Strom-/Gasmarkt nach der Liberalisierung}, year = {2001}, abstract = {Neues Energierecht Strom Neues Energierecht Gas Emissionshandel in Europa - ein interessanter Markt?}, subject = {Energierecht}, language = {de} } @article{Dielmann2002, author = {Dielmann, Klaus-Peter}, title = {Kraft-W{\"a}rme-K{\"a}lte-Kopplung mit Mikrogasturbinen : Abschlussbericht ; [01.09.2000 - 31.01.2002]}, publisher = {Fachhochsch. Aachen, Abt. J{\"u}lich, FB 7, NOWUM-Energy}, address = {J{\"u}lich}, pages = {15 Bl : Ill., graph. Darst.}, year = {2002}, language = {de} } @article{Dielmann2001, author = {Dielmann, Klaus-Peter}, title = {Mikrogasturbinen : Technik und Anwendung}, series = {BWK : das Energie-Fachmagazin . 53 (2001), H. 6}, journal = {BWK : das Energie-Fachmagazin . 53 (2001), H. 6}, isbn = {0006-9612}, pages = {6 -- 9}, year = {2001}, language = {de} } @article{Dielmann2000, author = {Dielmann, Klaus-Peter}, title = {Mikro-Gasturbine als Kleinst-BHKW-Bericht {\"u}ber Einsatzerfahrungen}, series = {F{\"u}nftes VWEW-Fachforum Nahw{\"a}rme 2000 : W{\"a}rmedirekt-Service der Energiedienstleistungsunternehmen mit Fachausstellung Nahw{\"a}rmetechnik 2000 ; 4. und 5. Mai 2000 in Halle}, journal = {F{\"u}nftes VWEW-Fachforum Nahw{\"a}rme 2000 : W{\"a}rmedirekt-Service der Energiedienstleistungsunternehmen mit Fachausstellung Nahw{\"a}rmetechnik 2000 ; 4. und 5. Mai 2000 in Halle}, publisher = {VWEW}, address = {[Frankfurt, Main]}, pages = {5.1 -- 5.22}, year = {2000}, language = {de} } @book{Dielmann1982, author = {Dielmann, Klaus-Peter}, title = {Heißgasventilatoren f{\"u}r den Industrieofenbau}, publisher = {Techn. Hochsch.}, address = {Aachen}, pages = {133 S.}, year = {1982}, language = {de} } @book{Dielmann2009, author = {Dielmann, Klaus-Peter}, title = {Integration des CROWN-Systems in die Biogasgewinnung [Elektronische Ressource] : Abschlussbericht / K. Dielmann}, publisher = {FH Aachen, Fachbereich 10 NOWUM-Energy}, address = {J{\"u}lich}, pages = {Online Ressource (68 S., 3,20 MB) : Ill., graph. D}, year = {2009}, language = {de} } @article{DielmannBockSonnek2007, author = {Dielmann, Klaus-Peter and Bock, Alexis and Sonnek, Frederic}, title = {Stand der CO2-Allokationspl{\"a}ne in Europa und Durchsetzung der Monitoring-Richtlinien}, series = {VGB PowerTech : international journal for electricity and heat generation}, volume = {87}, journal = {VGB PowerTech : international journal for electricity and heat generation}, number = {3}, isbn = {1435-3199}, pages = {40 -- 46}, year = {2007}, language = {de} } @inproceedings{DielmannCudina2003, author = {Dielmann, Klaus-Peter and Cudina, Boris}, title = {Emissionsrechtehandel in Europa - ein neues Instrument f{\"u}r den Umweltschutz}, year = {2003}, abstract = {Funktionsprinzip Emissionsrechtehandel, Betroffene Anlagen und Branchen, Erstverteilung der Emissionsrechte, Bereits erbrachte Emissionsreduktionen (early actions), Ausstieg von betroffenen Unternehmen (opt-out), Teilnahme von nicht betroffenen Unternehmen, Einsatz von Biobrennstoffen, Erfassung und Dokumentation der Emissionen}, subject = {Umweltzertifikathandel}, language = {de} } @article{DielmannCudinaMehlkopf2003, author = {Dielmann, Klaus-Peter and Cudina, Boris and Mehlkopf, Marcus}, title = {Einfluss der Brennstoffdaten auf die CO2-Inventarisierung : Handel mit Emissionsrechten}, series = {Euroheat and power : Kraft-W{\"a}rme-Kopplung, Nah-/Fernw{\"a}rme, Contracting}, volume = {32}, journal = {Euroheat and power : Kraft-W{\"a}rme-Kopplung, Nah-/Fernw{\"a}rme, Contracting}, number = {9}, isbn = {0949-166X}, pages = {22 -- 25}, year = {2003}, language = {de} } @techreport{DielmannErtl2013, author = {Dielmann, Klaus-Peter and Ertl, Karl-Heinz}, title = {MAK-Energie: Reinigung und energetische Verwertung von Kl{\"a}rgas durch den Einsatz einer Mikrogasturbine gekoppelt mit einer Adsorptionsk{\"a}ltemaschine : Abschlussbericht}, publisher = {Institut NOWUM-Energy}, address = {J{\"u}lich}, pages = {47, [1] Bl. : Ill., graph. Darst.}, year = {2013}, language = {de} } @article{DielmannIhle2000, author = {Dielmann, Klaus-Peter and Ihle, R.}, title = {Mikroturbinen : neue Chancen der Kraft-W{\"a}rme-(K{\"a}lte-)Kopplung im Leistungsbereich 30 - 200 kW(ind el) / R. Ihle ; K. Dielmann}, series = {Integrierte Energiesysteme : Chancen im Wettbewerb ; Tagung N{\"u}rnberg, 4. und 5. April 2000 / VDI-Gesellschaft Energietechnik. - (VDI-Berichte ; 1539)}, journal = {Integrierte Energiesysteme : Chancen im Wettbewerb ; Tagung N{\"u}rnberg, 4. und 5. April 2000 / VDI-Gesellschaft Energietechnik. - (VDI-Berichte ; 1539)}, publisher = {VDI-Verl.}, address = {D{\"u}sseldorf}, isbn = {3-18-091539-0}, pages = {245 -- 266}, year = {2000}, language = {de} } @article{DielmannKramer1982, author = {Dielmann, Klaus-Peter and Kramer, C.}, title = {Heißgasventilatoren f{\"u}r den Industrieofenbau / C. Kramer ; K.-P. Dielmann}, series = {Gasw{\"a}rme international : Gasanwendung in Industrie und Gewerbe. 31 (1982), H. 10}, journal = {Gasw{\"a}rme international : Gasanwendung in Industrie und Gewerbe. 31 (1982), H. 10}, isbn = {0020-9384}, pages = {461 -- 467}, year = {1982}, language = {de} } @article{DielmannMehlkopf2005, author = {Dielmann, Klaus-Peter and Mehlkopf, Marcus}, title = {National zugeteilte Emissionen}, series = {BWK : das Energie-Fachmagazin}, volume = {57}, journal = {BWK : das Energie-Fachmagazin}, number = {5}, isbn = {0006-9612}, issn = {1618-193X}, pages = {48 -- 52}, year = {2005}, language = {de} } @article{DielmannMehlkopfCudina2004, author = {Dielmann, Klaus-Peter and Mehlkopf, Marcus and Cudina, Boris}, title = {Erfahrungen mit der Software Risa-Gen}, series = {BWK : das Energie-Fachmagazin}, volume = {56}, journal = {BWK : das Energie-Fachmagazin}, number = {3}, isbn = {0006-9612}, issn = {1618-193X}, pages = {24 -- 25}, year = {2004}, language = {de} } @article{DielmannMehlkopfCudina2005, author = {Dielmann, Klaus-Peter and Mehlkopf, Marcus and Cudina, Boris}, title = {Der Handel mit Emissionsrechten : Vorbereitung auf den europaweiten Start 2005}, series = {VGB PowerTech : international journal for electricity and heat generation}, volume = {85}, journal = {VGB PowerTech : international journal for electricity and heat generation}, number = {1/2}, isbn = {1435-3199}, pages = {66 -- 69}, year = {2005}, language = {de} } @inproceedings{DielmannPeters2002, author = {Dielmann, Klaus-Peter and Peters, Bernhard}, title = {Micro Turbine Using Different Gases and Liquid Fuels}, year = {2002}, abstract = {Micro turbine using different gases and liquid fuels}, subject = {Gasturbine}, language = {en} } @article{DielmannSchieke2000, author = {Dielmann, Klaus-Peter and Schieke, W.}, title = {Mikro-Gasturbinen : Aufbau und Anwendung}, series = {Gasturbinen f{\"u}r kombinierte Gas-Dampfturbinenanlagen : und Workshop Advanced Power Plant Processes for Solid Fuels Focussing on Combined Cycles ; Tagung Essen, 13. und 14. September 2000 / VDI-Gesellschaft Energietechnik. - (VDI-Berichte ; 1566)}, journal = {Gasturbinen f{\"u}r kombinierte Gas-Dampfturbinenanlagen : und Workshop Advanced Power Plant Processes for Solid Fuels Focussing on Combined Cycles ; Tagung Essen, 13. und 14. September 2000 / VDI-Gesellschaft Energietechnik. - (VDI-Berichte ; 1566)}, publisher = {VDI-Verl.}, address = {D{\"u}sseldorf}, isbn = {3-18-091566-8}, pages = {187 -- 210}, year = {2000}, language = {de} } @inproceedings{DielmannSchieke2000, author = {Dielmann, Klaus-Peter and Schieke, Wolf}, title = {Mikrogasturbinen - Aufbau und Anwendungen}, year = {2000}, abstract = {Mikrogasturbinen: Funktion, Aufbau, Hersteller, Bauformen, Rekuperatorparameter, Besonderheit der Konstruktion, Regelung, Regelbarkeit, Vergleich mit anderen Systemen, Wirkungs- und Nutzungsgrade, Schadstoffemissionen, Nutzung in Kraft-W{\"a}rme-Kopplung, Kraft-W{\"a}rme-K{\"a}lte-Kopplung}, subject = {Gasturbine}, language = {de} } @inproceedings{DielmannVelden2003, author = {Dielmann, Klaus-Peter and Velden, Alwin van der}, title = {Virtuelle Kraftwerke - Stand der Technik}, year = {2003}, abstract = {Ausgangslage, Funktionsprinzip des virtuellen Kraftwerkes, Energiemanagementsysteme (EMS), Einsatzgebiete, Anlagesysteme eines VKW's, Einsatzbereich der verschiedenen dezentralen Energieanlagen, Vorteile des virtuellen Kraftwerkes, Auswirkungen auf das elektrische Netz, Wirtschaftliche Aspekte, Beispielprojekte}, language = {de} } @misc{DieringerRenzLindeletal.2010, author = {Dieringer, Matthias A. and Renz, Wolfgang and Lindel, Tomasz and Seifert, Frank and Frauenrath, Tobias and Waiczies, Helmar and von Knobelsdorff-Brenkhoff, Florian and Santoro, Davide and Hoffmann, Werner and Ittermann, Bernd and Schulz-Menger, Jeanette and Niendorf, Thoralf}, title = {4CH TX/RX Surface Coil for 7T: Design, Optimization and Application for Cardiac Function Imaging}, series = {2010 ISMRM-ESMRMB joint annual meeting}, journal = {2010 ISMRM-ESMRMB joint annual meeting}, issn = {1545-4428}, year = {2010}, abstract = {Practical impediments of ultra high field cardiovascular MR (CVMR) can be catalogued in exacerbated magnetic field and radio frequency (RF) inhomogeneities, susceptibility and off-resonance effects, conductive and dielectric effects in tissue, and RF power deposition constraints, which all bear the potential to spoil the benefit of CVMR at 7T. Therefore, a four element cardiac transceive surface coil array was developed. Cardiac imaging provided clinically acceptable signal homogeneity with an excellent blood myocardium contrast. Subtle anatomic structures, such as pericardium, mitral and tricuspid valves and their apparatus, papillary muscles, and trabecles were accurately delineated.}, language = {en} } @techreport{DilgerFischerHellmannsetal.2013, author = {Dilger, Klaus and Fischer, Fabian and Hellmanns, Mark and Werner, Frank and Wittor, Bj{\"o}rn}, title = {Applikation und Einsatz von faserverst{\"a}rkten Klebstoffen im Bauwesen (FibrAdh) : Schlussbericht : gef{\"o}rdertes Vorhaben 16.956 B / DVS-Nr. 08.072}, pages = {66 S.}, year = {2013}, language = {de} } @article{DotzauerPfeifferLaueretal.2019, author = {Dotzauer, Martin and Pfeiffer, Diana and Lauer, Markus and Pohl, Marcel and Mauky, Eric and B{\"a}r, Katharina and Sonnleitner, Matthias and Z{\"o}rner, Wilfried and Hudde, Jessica and Schwarz, Bj{\"o}rn and Faßauer, Burkhardt and Dahmen, Markus and Rieke, Christian and Herbert, Johannes and Thr{\"a}n, Daniela}, title = {How to measure flexibility - Performance indicators for demand driven power generation from biogas plants}, series = {Renewable Energy}, journal = {Renewable Energy}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0960-1481}, doi = {10.1016/j.renene.2018.10.021}, pages = {135 -- 146}, year = {2019}, language = {en} } @inproceedings{DuranParedesMottaghyHerrmannetal.2020, author = {Duran Paredes, Ludwin and Mottaghy, Darius and Herrmann, Ulf and Groß, Rolf Fritz}, title = {Online ground temperature and soil moisture monitoring of a shallow geothermal system with non-conventional components}, series = {EGU General Assembly 2020}, booktitle = {EGU General Assembly 2020}, year = {2020}, abstract = {We present first results from a newly developed monitoring station for a closed loop geothermal heat pump test installation at our campus, consisting of helix coils and plate heat exchangers, as well as an ice-store system. There are more than 40 temperature sensors and several soil moisture content sensors distributed around the system, allowing a detailed monitoring under different operating conditions.In the view of the modern development of renewable energies along with the newly concepts known as Internet of Things and Industry 4.0 (high-tech strategy from the German government), we created a user-friendly web application, which will connect the things (sensors) with the open network (www). Besides other advantages, this allows a continuous remote monitoring of the data from the numerous sensors at an arbitrary sampling rate.Based on the recorded data, we will also present first results from numerical simulations, taking into account all relevant heat transport processes.The aim is to improve the understanding of these processes and their influence on the thermal behavior of shallow geothermal systems in the unsaturated zone. This will in turn facilitate the prediction of the performance of these systems and therefore yield an improvement in their dimensioning when designing a specific shallow geothermal installation.}, language = {en} } @incollection{Doeren1998, author = {D{\"o}ren, Horst-Peter}, title = {Aktuelle Fragen zur Schweißmetallurgie. Neue Werkstoffe und ihre schweißtechnische Verarbeitung = Current questions on welding metallurgy}, series = {Jahrbuch Schweißtechnik '99}, booktitle = {Jahrbuch Schweißtechnik '99}, publisher = {DVS-Verlag}, address = {D{\"u}sseldorf}, isbn = {3-87155-745-5}, pages = {77 -- 85}, year = {1998}, language = {de} } @inproceedings{Doeren1988, author = {D{\"o}ren, Horst-Peter}, title = {The examination of surfaces of cold rolled wire for gas-shielded arc-welding}, series = {WAI/BISPA joint conference : proceedings. Joint conference of Wire Association International and the British Independent Steel Producers Association (WAI/BISPA) : 26 - 27. 09. 1988, Stratford-upon-Avon}, booktitle = {WAI/BISPA joint conference : proceedings. Joint conference of Wire Association International and the British Independent Steel Producers Association (WAI/BISPA) : 26 - 27. 09. 1988, Stratford-upon-Avon}, address = {Guilford, Conn.}, organization = {Wire Association International}, pages = {102 -- 112}, year = {1988}, language = {en} } @incollection{Doeren2008, author = {D{\"o}ren, Horst-Peter}, title = {Schweißtechnische Verarbeitung nichtrostender St{\"a}hle}, series = {Rostfreie St{\"a}hle. Grundwissen, Konstruktions- und Verarbeitungshinweise}, booktitle = {Rostfreie St{\"a}hle. Grundwissen, Konstruktions- und Verarbeitungshinweise}, editor = {G{\"u}mpel, Paul}, publisher = {Expert Verlag}, address = {Renningen}, isbn = {978-3-8169-2689-4}, pages = {140 -- 174}, year = {2008}, language = {de} } @incollection{Doeren1987, author = {D{\"o}ren, Horst-Peter}, title = {Nichtrostende St{\"a}hle}, series = {Jahrbuch Schweißtechnik. 1988}, booktitle = {Jahrbuch Schweißtechnik. 1988}, publisher = {Dt. Verl. f{\"u}r Schweißtechnik (DVS)}, address = {D{\"u}sseldorf}, isbn = {0935-0292}, pages = {188 -- 203}, year = {1987}, language = {de} } @article{Doeren1987, author = {D{\"o}ren, Horst-Peter}, title = {Pulver-Auftragschweissen / Hoher Automatisierungsgrad des Plasmaverfahrens. Harte Panzerung aus dem Argon-Strahl.}, series = {Handelsblatt. Nr. 212 vom 4.11.1987}, journal = {Handelsblatt. Nr. 212 vom 4.11.1987}, pages = {b15}, year = {1987}, language = {de} } @incollection{Doeren1990, author = {D{\"o}ren, Horst-Peter}, title = {Das Schweißen von Austenit-Ferrit-Verbindungen}, series = {Jahrbuch Schweißtechnik. 1991}, booktitle = {Jahrbuch Schweißtechnik. 1991}, publisher = {DVS-Verlag}, address = {D{\"u}sseldorf}, isbn = {3-87155-725-0}, pages = {57 -- 63}, year = {1990}, language = {de} } @book{Doeren2004, author = {D{\"o}ren, Horst-Peter}, title = {F{\"u}getechnik, Schweißtechnik / Horst-Peter D{\"o}ren (Hrsg.).- 6. Aufl.}, publisher = {DVS Verl.}, address = {D{\"u}sseldorf}, isbn = {3-87155-786-2}, pages = {392 S.}, year = {2004}, language = {de} } @book{Doeren2007, author = {D{\"o}ren, Horst-Peter}, title = {F{\"u}getechnik, Schweißtechnik / Horst-Peter D{\"o}ren (Hrsg.).- 7., aktualis. Aufl.}, publisher = {DVS Verl.}, address = {D{\"u}sseldorf}, isbn = {978-3-87155-907-5}, pages = {392 S.}, year = {2007}, language = {de} } @book{Doeren1977, author = {D{\"o}ren, Horst-Peter}, title = {Anwendung von AlN- bzw. AlN-Al2O3-Mischungen als Festelektrolyt in Eisenschmelzen bei 1640° C}, address = {Aachen}, pages = {52 S., 33 Bl. : Ill.}, year = {1977}, language = {de} } @book{Doeren2012, author = {D{\"o}ren, Horst-Peter}, title = {F{\"u}getechnik, Schweißtechnik. Horst-Peter D{\"o}ren (Hrsg.).- 8., aktualis. und erw. Aufl.}, publisher = {DVS Media}, address = {D{\"u}sseldorf}, isbn = {978-3-87155-999-0}, pages = {411 S.: Ill., graph. Darst.}, year = {2012}, language = {de} } @inproceedings{DoerenKroeschel1991, author = {D{\"o}ren, Horst-Peter and Kr{\"o}schel, R.}, title = {Plasma-Spritzen}, series = {Schweisszusatzwerkstoffe : Fortschritte, Erfahrungen, Tendenzen. 2. Aachener Schweisstechnik-Kolloquium, 7. bis 8. M{\"a}rz 1991}, booktitle = {Schweisszusatzwerkstoffe : Fortschritte, Erfahrungen, Tendenzen. 2. Aachener Schweisstechnik-Kolloquium, 7. bis 8. M{\"a}rz 1991}, editor = {Dilthey, Ulrich}, publisher = {VDI-Verl.}, address = {D{\"u}sseldorf}, isbn = {3-18-140802-6}, pages = {147 -- 167}, year = {1991}, language = {de} } @inproceedings{DoerenLohrmannWernicke1986, author = {D{\"o}ren, Horst-Peter and Lohrmann, G. R. and Wernicke, K.}, title = {Plasma-Auftragschweißen mit Metallpulvern und Einsatzm{\"o}glichkeiten in der Kerntechnik}, series = {Schweissen in der Kerntechnik : Vortr{\"a}ge : internationales Kolloquium. 5 = Welding in nuclear engineering: international conference. 5 = Le soudage dans la technique nucleaire: colloque international. 5 : N{\"u}rnberg, 26.11.86-28.11.86. DVS-Berichte. Bd. 106}, booktitle = {Schweissen in der Kerntechnik : Vortr{\"a}ge : internationales Kolloquium. 5 = Welding in nuclear engineering: international conference. 5 = Le soudage dans la technique nucleaire: colloque international. 5 : N{\"u}rnberg, 26.11.86-28.11.86. DVS-Berichte. Bd. 106}, publisher = {Dt. Verl. f{\"u}r Schweißtechnik}, address = {D{\"u}sseldorf}, isbn = {3-87155-411-1}, pages = {129 -- 133}, year = {1986}, language = {de} } @inproceedings{DoerenMolitorErtl1996, author = {D{\"o}ren, Horst-Peter and Molitor, M. and Ertl, Karl-Heinz}, title = {Problematik der H{\"a}rtemessung an pulverflammgespritzten Verschleißschutzschichten mit Hilfe mobiler, dynamischer H{\"a}rtepr{\"u}fverfahren}, series = {Thermische Spritzkonferenz : TS 96 ; Vortr{\"a}ge und Posterbeitr{\"a}ge. Essen 6. bis 8. M{\"a}rz 1996. DVS-Berichte. Bd. 175}, booktitle = {Thermische Spritzkonferenz : TS 96 ; Vortr{\"a}ge und Posterbeitr{\"a}ge. Essen 6. bis 8. M{\"a}rz 1996. DVS-Berichte. Bd. 175}, editor = {Lugscheider, Erich}, publisher = {DVS-Verl.}, address = {D{\"u}sseldorf}, isbn = {3-87155-480-4}, pages = {249 -- 254}, year = {1996}, language = {de} } @incollection{DoerenPlaschkaPohl1987, author = {D{\"o}ren, Horst-Peter and Plaschka, K. and Pohl, M.}, title = {Die Untersuchung von Schutzgasschweißdr{\"a}hten mit Hilfe des Rasterelektronenmikroskops}, series = {Fortschritte in der Metallographie. Berichte der 7. Internationalen Metallographie-Tagung Leoben 15. bis 17. Oktober 1986. Sonderb{\"a}nde der Praktischen Metallographie. 18}, booktitle = {Fortschritte in der Metallographie. Berichte der 7. Internationalen Metallographie-Tagung Leoben 15. bis 17. Oktober 1986. Sonderb{\"a}nde der Praktischen Metallographie. 18}, publisher = {Riederer}, address = {Stuttgart}, issn = {0343-3579}, pages = {333 -- 345}, year = {1987}, language = {de} } @inproceedings{DoerenWernicke1983, author = {D{\"o}ren, Horst-Peter and Wernicke, K.}, title = {Auftragen von verschleißfesten stranggegossenen Hartlegierungen auf Kobaltbasis durch das WIG- und Gasschweißen}, series = {Schweißen und Schneiden '83 = Welding and Cutting '83. Vortr{\"a}ge der Großen Schweißtechnischen Tagung in Aachen vom 28. bis 30. September 1983. Veranst.: Deutscher Verband f{\"u}r Schweißtechnik (DVS). DVS-Berichte. 83}, booktitle = {Schweißen und Schneiden '83 = Welding and Cutting '83. Vortr{\"a}ge der Großen Schweißtechnischen Tagung in Aachen vom 28. bis 30. September 1983. Veranst.: Deutscher Verband f{\"u}r Schweißtechnik (DVS). DVS-Berichte. 83}, publisher = {Dt. Verl. f{\"u}r Schweißtechnik}, address = {D{\"u}sseldorf}, issn = {3-87155-388-3}, pages = {109 -- 113}, year = {1983}, language = {de} } @article{DoerenWernicke1987, author = {D{\"o}ren, Horst-Peter and Wernicke, K.}, title = {Slijtvaste lagen door oplassen met plasmapoeder}, series = {Metaal en Kunststof: MK. Universeel weekblad voor fabriek en werkplaats. 24 (1987), Nr. 23}, journal = {Metaal en Kunststof: MK. Universeel weekblad voor fabriek en werkplaats. 24 (1987), Nr. 23}, issn = {0026-0460}, pages = {76 -- 79}, year = {1987}, language = {nl} } @incollection{DoerenWernicke1985, author = {D{\"o}ren, Horst-Peter and Wernicke, K.}, title = {Einfluß der Schweißparameter beim Plasmaauftragschweißen mit Pulvern}, series = {Schweißen und Schneiden '85 = Welding and Cutting '85. Vortr{\"a}ge der Großen Schweißtechnischen Tagung in Essen vom 11. bis 13. September 1985. Veranst.: Deutscher Verband f{\"u}r Schweißtechnik (DVS). DVS-Berichte. 100}, booktitle = {Schweißen und Schneiden '85 = Welding and Cutting '85. Vortr{\"a}ge der Großen Schweißtechnischen Tagung in Essen vom 11. bis 13. September 1985. Veranst.: Deutscher Verband f{\"u}r Schweißtechnik (DVS). DVS-Berichte. 100}, publisher = {Dt. Verl. f{\"u}r Schweißtechnik (DVS)}, address = {D{\"u}sseldorf}, isbn = {3-87155-405-7}, pages = {72 -- 76}, year = {1985}, language = {de} } @inproceedings{DuemmlerOetringerGoettsche2020, author = {D{\"u}mmler, Andreas and Oetringer, Kerstin and G{\"o}ttsche, Joachim}, title = {Auslegungstool zur energieeffizienten K{\"u}hlung von Geb{\"a}uden}, series = {DKV-Tagung 2020, AA IV}, booktitle = {DKV-Tagung 2020, AA IV}, pages = {1109}, year = {2020}, abstract = {Thematisch widmet sich das Projekt Coolplan- AIR der Fortentwicklung und Feldvalidierung eines Berechnungs- und Auslegungstools zur energieeffizienten K{\"u}hlung von Geb{\"a}uden mit luftgest{\"u}tzten Systemen. Neben dem Aufbau und der Weiterentwicklung von Simulationsmodellen erfolgen Vermessungen der Gesamtsysteme anhand von Praxisanlagen im Feld. Der Schwerpunkt des Projekts liegt auf der Vermessung, Simulation und Integration rein luftgest{\"u}tzter K{\"u}hltechnologien. Im Bereich der K{\"a}lteerzeugung wurden Luft- Luft- W{\"a}rmepumpen, Anlagen zur adiabaten K{\"u}hlung bzw. offene K{\"u}hlt{\"u}rme und VRF- Multisplit- Systeme (Variable Refrigerant Flow) im Feld bzw. auf dem Teststand der HSD vermessen. Die Komponentenmodelle werden in die Matlab/Simulink- Toolbox CARNOT integriert und anschließend auf Basis der zuvor erhaltenen Messdaten validiert. Einerseits erlauben die Messungen das Betriebsverhalten von Anlagenkomponenten zu analysieren. Andererseits soll mit der Vermessung im Feld gepr{\"u}ft werden, inwieweit die Simulationsmodelle, welche im Vorg{\"a}ngerprojekt aus Pr{\"u}fstandmessungen entwickelt wurden, auch f{\"u}r gr{\"o}ßere Ger{\"a}teleistungen G{\"u}ltigkeit besitzen. Die entwickelten und implementierten Systeme, bestehend aus verschiedensten Anlagenmodellen und Regelungskomponenten, werden gepr{\"u}ft und dahingehend qualifiziert, dass sie in Standard- Auslegungstools zuverl{\"a}ssig verwendet werden k{\"o}nnen. Zus{\"a}tzlich wird ein energetisches Monitoring eines H{\"o}rsaalgeb{\"a}udes am Campus J{\"u}lich durchgef{\"u}hrt, das u. a. zur Validierung der K{\"u}hllastberechnungen in g{\"a}ngigen Simulationsmodelle genutzt werden kann.}, language = {de} } @article{EdipSesovButenwegetal.2018, author = {Edip, K. and Sesov, V. and Butenweg, Christoph and Bojadjieva, J.}, title = {Development of coupled numerical model for simulation of multiphase soil}, series = {Computers and Geotechnics}, volume = {96}, journal = {Computers and Geotechnics}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0266-352X}, doi = {10.1016/j.compgeo.2017.08.016}, pages = {118 -- 131}, year = {2018}, abstract = {In this paper, a coupled multiphase model considering both non-linearities of water retention curves and solid state modeling is proposed. The solid displacements and the pressures of both water and air phases are unknowns of the proposed model. The finite element method is used to solve the governing differential equations. The proposed method is demonstrated through simulation of seepage test and partially consolidation problem. Then, implementation of the model is done by using hypoplasticity for the solid phase and analyzing the fully saturated triaxial experiments. In integration of the constitutive law error controlling is improved and comparisons done accordingly. In this work, the advantages and limitations of the numerical model are discussed.}, language = {en} } @inproceedings{EdipGarevskiButenwegetal.2014, author = {Edip, Kemal and Garevski, Mihail and Butenweg, Christoph and Sesov, Vlatko and Bojadjieva, Julijana and Gjorgjiev, Igor}, title = {Boundary effects on seismic analysis of multi-storey frames considering soil structure interaction phenomenon}, series = {Seismic design of industrial facilities : proceedings of the International Conference on Seismic Design of Industrial Facilities (SeDIF-Conference) ; [Aachen, 26. - 27. September 2013] / Chair of Structural Statics and Dynamics, RWTH Aachen. Sven Klinkel ..., ed}, booktitle = {Seismic design of industrial facilities : proceedings of the International Conference on Seismic Design of Industrial Facilities (SeDIF-Conference) ; [Aachen, 26. - 27. September 2013] / Chair of Structural Statics and Dynamics, RWTH Aachen. Sven Klinkel ..., ed}, publisher = {Springer Vieweg}, address = {Wiesbaden}, organization = {International Conference on Seismic Design of Industrial Facilities <2013, Aachen>}, isbn = {978-3-658-02809-1 (Print) ; 978-3-658-02810-7}, doi = {10.1007/978-3-658-02810-7_47}, pages = {569 -- 576}, year = {2014}, language = {en} } @article{EdipGarevskiButenwegetal.2013, author = {Edip, Kemal and Garevski, Mihail and Butenweg, Christoph and Sesov, Vlatko and Cvetanovska, Julijana and Gjorgiev, Igor}, title = {Numerical simulation of geotechnical problems by coupled finite and infinite elements}, series = {Journal of civil engineering and architecture}, volume = {7}, journal = {Journal of civil engineering and architecture}, number = {1}, publisher = {David Publishing}, address = {Libertyville}, issn = {1934-7359 (E-Journal)}, pages = {68 -- 77}, year = {2013}, language = {en} } @inproceedings{EdipGarevskiButenwegetal.2014, author = {Edip, Kemal and Garevski, Mihail and Butenweg, Christoph and Sheshov, Vlatko and Bojadjieva, Julijana and Gjorgjiev, Igor}, title = {New coupled finite-infinite element approach for wave propagation simulation of unbounded soil media}, series = {2nd European Conference on Earthquake Engineering and Seismology 2014 (2nd ECEES) : joint event of the 15th European Conference on Earthquake Engineering and the 34th General Assembly of the European Seismological Commission : Istanbul, Turkey, 25-29 August 2014 / European Association for Earthquake Engineering (EAEE) ; Vol. 2}, booktitle = {2nd European Conference on Earthquake Engineering and Seismology 2014 (2nd ECEES) : joint event of the 15th European Conference on Earthquake Engineering and the 34th General Assembly of the European Seismological Commission : Istanbul, Turkey, 25-29 August 2014 / European Association for Earthquake Engineering (EAEE) ; Vol. 2}, publisher = {Curran Associates, Inc.}, address = {Red Hook, NY}, organization = {European Conference on Earthquake Engineering and Seismology <2, 2014, Istanbul>}, isbn = {978-1-5108-1021-1}, pages = {1556 -- 1561}, year = {2014}, language = {en} } @inproceedings{ElMoussaouiKassmiAlexopoulosetal.2021, author = {El Moussaoui, Noureddine and Kassmi, Khalil and Alexopoulos, Spiros and Schwarzer, Klemens and Chayeb, Hamid and Bachiri, Najib}, title = {Simulation studies on a new innovative design of a hybrid solar distiller MSDH alimented with a thermal and photovoltaic energy}, series = {Materialstoday: Proceedings}, volume = {45}, booktitle = {Materialstoday: Proceedings}, number = {8}, publisher = {Elsevier}, address = {Amsterdam}, issn = {2214-7853}, doi = {10.1016/j.matpr.2021.03.115}, pages = {7653 -- 7660}, year = {2021}, abstract = {In this paper, we present the structure, the simulation the operation of a multi-stage, hybrid solar desalination system (MSDH), powered by thermal and photovoltaic (PV) (MSDH) energy. The MSDH system consists of a lower basin, eight horizontal stages, a field of four flat thermal collectors with a total area of 8.4 m2, 3 Kw PV panels and solar batteries. During the day the system is heated by thermal energy, and at night by heating resistors, powered by solar batteries. These batteries are charged by the photovoltaic panels during the day. More specifically, during the day and at night, we analyse the temperature of the stages and the production of distilled water according to the solar irradiation intensity and the electric heating power, supplied by the solar batteries. The simulations were carried out in the meteorological conditions of the winter month (February 2020), presenting intensities of irradiance and ambient temperature reaching 824 W/m2 and 23 °C respectively. The results obtained show that during the day the system is heated by the thermal collectors, the temperature of the stages and the quantity of water produced reach 80 °C and 30 Kg respectively. At night, from 6p.m. the system is heated by the electric energy stored in the batteries, the temperature of the stages and the quantity of water produced reach respectively 90 °C and 104 Kg for an electric heating power of 2 Kw. Moreover, when the electric power varies from 1 Kw to 3 Kw the quantity of water produced varies from 92 Kg to 134 Kg. The analysis of these results and their comparison with conventional solar thermal desalination systems shows a clear improvement both in the heating of the stages, by 10\%, and in the quantity of water produced by a factor of 3.}, language = {en} } @article{ElDeibButenwegKlinkel2020, author = {El-Deib, Khaled and Butenweg, Christoph and Klinkel, Sven}, title = {Erdbebennachweis von Mauerwerksbauten mit realistischen Modellen und erh{\"o}hten Verhaltensbeiwerten}, series = {Bautechnik}, volume = {97}, journal = {Bautechnik}, number = {11}, publisher = {Ernst \& Sohn}, address = {Berlin}, doi = {10.1002/bate.202000016}, pages = {756 -- 765}, year = {2020}, abstract = {Die Anwendung des linearen Nachweiskonzepts auf Mauerwerksbauten f{\"u}hrt dazu, dass bereits heute Standsicherheitsnachweise f{\"u}r Geb{\"a}ude mit {\"u}blichen Grundrissen in Gebieten mit moderaten Erdbebeneinwirkungen nicht mehr gef{\"u}hrt werden k{\"o}nnen. Diese Problematik wird sich in Deutschland mit der Einf{\"u}hrung kontinuierlicher probabilistischer Erdbebenkarten weiter versch{\"a}rfen. Aufgrund der Erh{\"o}hung der seismischen Einwirkungen, die sich vielerorts ergibt, ist es erforderlich, die vorhandenen, bislang nicht ber{\"u}cksichtigten Tragf{\"a}higkeitsreserven in nachvollziehbaren Nachweiskonzepten in der Baupraxis verf{\"u}gbar zu machen. Der vorliegende Beitrag stellt ein Konzept f{\"u}r die geb{\"a}udespezifische Ermittlung von erh{\"o}hten Verhaltensbeiwerten vor. Die Verhaltensbeiwerte setzen sich aus drei Anteilen zusammen, mit denen die Lastumverteilung im Grundriss, die Verformungsf{\"a}higkeit und Energiedissipation sowie die {\"U}berfestigkeiten ber{\"u}cksichtigt werden. F{\"u}r die rechnerische Ermittlung dieser drei Anteile wird ein nichtlineares Nachweiskonzept auf Grundlage von Pushover-Analysen vorgeschlagen, in denen die Interaktionen von W{\"a}nden und Geschossdecken durch einen Einspanngrad beschrieben werden. F{\"u}r die Bestimmung der Einspanngrade wird ein nichtlinearer Modellierungsansatz eingef{\"u}hrt, mit dem die Interaktion von W{\"a}nden und Decken abgebildet werden kann. Die Anwendung des Konzepts mit erh{\"o}hten geb{\"a}udespezifischen Verhaltensbeiwerten wird am Beispiel eines Mehrfamilienhauses aus Kalksandsteinen demonstriert. Die Ergebnisse der linearen Nachweise mit erh{\"o}hten Verhaltensbeiwerten f{\"u}r dieses Geb{\"a}ude liegen deutlich n{\"a}her an den Ergebnissen nichtlinearer Nachweise und somit bleiben {\"u}bliche Grundrisse in Erdbebengebieten mit den traditionellen linearen Rechenans{\"a}tzen nachweisbar.}, language = {de} }