@inproceedings{MarinkovicButenweg2018,
  author    = {Marinkovic, Marko and Butenweg, Christoph},
  title     = {Innovative System for Earthquake Resistant Masonry Infill Walls},
  series = {16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018},
  booktitle = {16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018},
  pages     = {1 -- 12},
  year      = {2018},
  language  = {en}
}
@inproceedings{ButenwegMarinkovicFehlingetal.2018,
  author    = {Butenweg, Christoph and Marinkovic, Marko and Fehling, Ekkehard and Pfetzing, Thomas and Kubalski, Thomas},
  title     = {Experimental and Numerical Investigations of Reinforced Concrete Frames with Masonry Infills under Combined In- and Out-of-plane Seismic Loading},
  series = {16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018},
  booktitle = {16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018},
  pages     = {1 -- 12},
  year      = {2018},
  language  = {en}
}
@inproceedings{MichelButenwegKlinkel2018,
  author    = {Michel, Philipp and Butenweg, Christoph and Klinkel, Sven},
  title     = {Frequency Dependent Impedance Analysis of the Foundation-Soil-Systems of Onshore Wind Turbines},
  series = {16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018},
  booktitle = {16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018},
  pages     = {1 -- 13},
  year      = {2018},
  language  = {en}
}
@inproceedings{SchmittRosinButenweg2018,
  author    = {Schmitt, Timo and Rosin, Julia and Butenweg, Christoph},
  title     = {Seismic Impact And Design Of Buried Pipelines},
  series = {16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018},
  booktitle = {16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018},
  pages     = {1 -- 12},
  year      = {2018},
  abstract  = {Seismic design of buried pipeline systems for energy and water supply is not only important for plant and operational safety but also for the maintenance of the supply infrastructure after an earthquake. The present paper shows special issues of the seismic wave impacts on buried pipelines, describes calculation methods, proposes approaches and gives calculation examples. This paper regards the effects of transient displacement differences and resulting tensions within the pipeline due to the wave propagation of the earthquake. However, the presented model can also be used to calculate fault rupture induced displacements. Based on a three-dimensional Finite Element Model parameter studies are performed to show the influence of several parameters such as incoming wave angle, wave velocity, backfill height and synthetic displacement time histories. The interaction between the pipeline and the surrounding soil is modeled with non-linear soil springs and the propagating wave is simulated affecting the pipeline punctually, independently in time and space. Special attention is given to long-distance heat pipeline systems. Here, in regular distances expansion bends are arranged to ensure movements of the pipeline due to high temperature. Such expansion bends are usually designed with small bending radii, which during the earthquake lead to high bending stresses in the cross-section of the pipeline. Finally, an interpretation of the results and recommendations are given for the most critical parameters.},
  language  = {en}
}
@inproceedings{MilkovaRosinButenwegetal.2018,
  author    = {Milkova, Kristina and Rosin, Julia and Butenweg, Christoph and Dumova-Jovanoska, Elena},
  title     = {Development of Seismic Vulnerability Curves for Region Specific Masonry Buildings},
  series = {16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018},
  booktitle = {16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018},
  pages     = {1 -- 10},
  year      = {2018},
  language  = {en}
}
@inproceedings{AnicPenavaGuljasetal.2018,
  author    = {Anic, Filip and Penava, Davorin and Guljas, Ivica and Sarhosis, Vasilis and Abrahamczyk, Lars and Butenweg, Christoph},
  title     = {The Effect of Openings on Out-of-Plane Capacity of Masonry Infilled Reinforced Concrete Frames},
  series = {16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018},
  booktitle = {16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018},
  pages     = {1 -- 11},
  year      = {2018},
  language  = {en}
}
@inproceedings{RosinButenwegBoesenetal.2018,
  author    = {Rosin, Julia and Butenweg, Christoph and Boesen, Niklas and Gellert, Christoph},
  title     = {Evaluation of the Seismic Behavior of a Modern URM Building During the 2012 Northern Italy Earthquakes},
  series = {16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018},
  booktitle = {16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018},
  pages     = {1 -- 12},
  year      = {2018},
  language  = {en}
}
@article{ButenwegMarinkovićFehlingetal.2018,
  author    = {Butenweg, Christoph and Marinković, Marko and Fehling, Ekkehard and Pfetzing, Thomas},
  title     = {Stahlbetonrahmentragwerke mit Ausfachungen aus Mauerwerk unter kombinierten seismischen Belastungen in und senkrecht zur Wandebene},
  series = {Bauingenieur},
  volume    = {93},
  journal   = {Bauingenieur},
  publisher = {VDI Fachmedien},
  address   = {D{\"u}sseldorf},
  isbn      = {0005-6650},
  pages     = {2 -- 10},
  year      = {2018},
  language  = {de}
}
@inproceedings{ButenwegMarinkovic2018,
  author    = {Butenweg, Christoph and Marinkovic, Marko},
  title     = {Damage reduction system for masonry infill walls under seismic loading},
  series = {ce/papers},
  volume    = {2},
  booktitle = {ce/papers},
  number    = {4},
  publisher = {Ernst \& Sohn Verlag},
  address   = {Berlin},
  doi       = {10.1002/cepa.863},
  pages     = {267 -- 273},
  year      = {2018},
  abstract  = {Reinforced concrete (RC) frames with masonry infills are frequently used in seismic regions all over the world. Generally masonry infills are considered as nonstructural elements and thus are typically neglected in the design process. However, the observations made after strong earthquakes have shown that masonry infills can modify the dynamic behavior of the structure significantly. The consequences were total collapses of buildings and loss of human lives. This paper presents the new system INODIS (Innovative Decoupled Infill System) developed within the European research project INSYSME (Innovative Systems for Earthquake Resistant Masonry Enclosures in RC Buildings). INODIS decouples the frame and the masonry infill by means of special U-shaped rubbers placed in between frame and infill. The effectiveness of the system was investigated by means of full scale tests on RC frames with masonry infills subjected to in-plane and out-of-plane loading. Furthermore small specimen tests were conducted to determine material characteristics of the components and the resistances of the connections. Finally, a micromodel was developed to simulate the in-plane behavior of RC frames infilled with AAC blocks with and without installation of the INODIS system.},
  language  = {en}
}
@article{RosinButenwegCacciatoreetal.2018,
  author    = {Rosin, Julia and Butenweg, Christoph and Cacciatore, Pamela and Boesen, Niklas},
  title     = {Investigation of the seismic performance of modern masonry buildings during the Emilia Romagna earthquake series},
  series = {Mauerwerk},
  volume    = {22},
  journal   = {Mauerwerk},
  number    = {4},
  publisher = {Ernst \& Sohn},
  address   = {Berlin},
  issn      = {1437-1022},
  doi       = {10.1002/dama.201800013},
  pages     = {238 -- 250},
  year      = {2018},
  abstract  = {The article presents the investigation of the seismic behaviour of a modern URM building located in the municipality of Finale Emilia in province of Modena, Northern Italy. The building is situated in the centre of the series of the 2012 Northern Italy earthquakes and has not suffered any damage during the earthquake series in 2012. The observed earthquake resistance of the building is compared with predicted resistances based on linear and nonlinear design approaches according to Eurocode. Furthermore, probabilistic analyses based on nonlinear calculation models taking into account scattering of the most relevant input parameters are carried out to identify their influence to the results and to derive fragility curves.},
  language  = {en}
}
@article{ButenwegMarinkovic2018,
  author    = {Butenweg, Christoph and Marinkovic, Marko},
  title     = {Erdbebensicherer Anschluss von Ausfachungsmauerwerk in Stahlbetonrahmentragwerken mit Entkopplungselementen},
  series = {Bauingenieur},
  volume    = {93},
  journal   = {Bauingenieur},
  number    = {9},
  publisher = {VDI Fachmedien},
  address   = {D{\"u}sseldorf},
  issn      = {0005-6650},
  pages     = {333 -- 341},
  year      = {2018},
  abstract  = {Stahlbetonrahmentragwerke mit Mauerwerksausfachungen weisen nach Erdbebenereignissen h{\"a}ufig schwere Sch{\"a}den auf, da die Ausfachungen ohne weitere konstruktive Maßnahmen mit vollem Kontakt zum Stahlbetonrahmen eingemauert werden. Durch die unplanm{\"a}ßige Beteiligung am horizontalen Lastabtrag erfahren die Ausfachungen Belastungen in Wandebene und beeinflussen das globale Schwingungsverhalten der Rahmentragwerke. In Kombination mit den gleichzeitig auftretenden seismischen Tr{\"a}gheitskr{\"a}ften senkrecht zur Wand f{\"u}hrt dies in vielen F{\"a}llen zu einem Versagen der mit niedrigen Festigkeiten ausgef{\"u}hrten Ausfachungen. Dies war der Anlass in dem europ{\"a}ischen Forschungsprojekt INSYSME ein Entkopplungssystem zu entwickeln, mit dem Rahmen und Ausfachung durch ein spezielles Profil aus Elastomeren entkoppelt werden. Das Profil erm{\"o}glicht Relativverschiebungen zwischen Rahmen und Ausfachung und stellt gleichzeitig die Aufnahme von Belastungen senkrecht zur Wand sicher. Der Beitrag erl{\"a}utert zun{\"a}chst den Aufbau des Systems und gibt einen {\"U}berblick {\"u}ber die in Kleinbauteilversuchen ermittelten Tragf{\"a}higkeiten. Zudem werden experimentelle Untersuchungen an mit hochw{\"a}rmed{\"a}mmenden Mauerziegeln ausgefachten Stahlbetonrahmen mit und ohne Entkopplungssystem f{\"u}r getrennte und kombinierte Belastungen in und senkrecht zur Wandebene vorgestellt. Auf Grundlage einer Versuchsauswertung und eines Ergebnisvergleichs werden Wirkungsweise und Effektivit{\"a}t des entwickelten Entkopplungssystems demonstriert.},
  language  = {de}
}
@article{MichelButenwegKinkel2018,
  author    = {Michel, Philipp and Butenweg, Christoph and Kinkel, Sven},
  title     = {Pile-grid foundations of onshore wind turbines considering soil-structure-interaction under seismic loading},
  series = {Soil Dynamics and Earthquake Engineering},
  volume    = {109},
  journal   = {Soil Dynamics and Earthquake Engineering},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0267-7261},
  doi       = {10.1016/j.soildyn.2018.03.009},
  pages     = {299 -- 311},
  year      = {2018},
  abstract  = {In recent years, many onshore wind turbines are erected in seismic active regions and on soils with poor load bearing capacity, where pile grids are inevitable to transfer the loads into the ground. In this contribution, a realistic multi pile grid is designed to analyze the dynamics of a wind turbine tower including frequency dependent soil-structure-interaction. It turns out that different foundations on varying soil configurations heavily influence the vibration response. While the vibration amplitude is mostly attenuated, certain unfavorable combinations of structure and soil parameters lead to amplification in the range of the system's natural frequencies. This testifies the need for overall dynamic analysis in the assessment of the dynamic stability and the holistic frequency tuning of the turbines.},
  language  = {en}
}
@article{QuittmannMeskemperAbeletal.2018,
  author    = {Quittmann, Oliver J. and Meskemper, Joshua and Abel, Thomas and Albracht, Kirsten and Foitschik, Tina and Rojas-Vega, Sandra and Str{\"u}der, Heiko K.},
  title     = {Kinematics and kinetics of handcycling propulsion at increasing workloads in able-bodied subjects},
  series = {Sports Engineereing},
  volume    = {21},
  journal   = {Sports Engineereing},
  number    = {21},
  publisher = {Springer Nature},
  address   = {Cham},
  issn      = {1460-2687},
  doi       = {10.1007/s12283-018-0269-y},
  pages     = {283 -- 294},
  year      = {2018},
  abstract  = {In Paralympic sports, biomechanical optimisation of movements and equipment seems to be promising for improving performance. In handcycling, information about the biomechanics of this sport is mainly provided by case studies. The aim of the current study was (1) to examine changes in handcycling propulsion kinematics and kinetics due to increasing workloads and (2) identify parameters that are associated with peak aerobic performance. Twelve non-disabled male competitive triathletes without handcycling experience voluntarily participated in the study. They performed an initial familiarisation protocol and incremental step test until exhaustion in a recumbent racing handcycle that was attached to an ergometer. During the incremental test, tangential crank kinetics, 3D joint kinematics, blood lactate and ratings of perceived exertion (local and global) were identified. As a performance criterion, the maximal power output during the step test (Pmax) was calculated and correlated with biomechanical parameters. For higher workloads, an increase in crank torque was observed that was even more pronounced in the pull phase than in the push phase. Furthermore, participants showed an increase in shoulder internal rotation and abduction and a decrease in elbow flexion and retroversion. These changes were negatively correlated with performance. At high workloads, it seems that power output is more limited by the transition from pull to push phase than at low workloads. It is suggested that successful athletes demonstrate small alterations of their kinematic profile due to increasing workloads. Future studies should replicate and expand the test spectrum (sprint and continuous loads) as well as use methods like surface electromyography (sEMG) with elite handcyclists.},
  language  = {de}
}
@article{ConzenAlbannaWeissetal.2018,
  author    = {Conzen, Catharina and Albanna, Walid and Weiss, Miriam and K{\"u}rten, David and Vilser, Walthard and Kotliar, Konstantin and Z{\"a}ske, Charlotte and Clusmann, Hans and Schubert, Gerrit Alexander},
  title     = {Vasoconstriction and Impairment of Neurovascular Coupling after Subarachnoid Hemorrhage: a Descriptive Analysis of Retinal Changes},
  series = {Translational Stroke Research},
  journal   = {Translational Stroke Research},
  number    = {9},
  publisher = {Springer Nature},
  address   = {Cham},
  issn      = {1868-601X},
  doi       = {10.1007/s12975-017-0585-8},
  pages     = {284 -- 293},
  year      = {2018},
  abstract  = {Impaired cerebral autoregulation and neurovascular coupling (NVC) contribute to delayed cerebral ischemia after subarachnoid hemorrhage (SAH). Retinal vessel analysis (RVA) allows non-invasive assessment of vessel dimension and NVC hereby demonstrating a predictive value in the context of various neurovascular diseases. Using RVA as a translational approach, we aimed to assess the retinal vessels in patients with SAH. RVA was performed prospectively in 24 patients with acute SAH (group A: day 5-14), in 11 patients 3 months after ictus (group B: day 90 ± 35), and in 35 age-matched healthy controls (group C). Data was acquired using a Retinal Vessel Analyzer (Imedos Systems UG, Jena) for examination of retinal vessel dimension and NVC using flicker-light excitation. Diameter of retinal vessels—central retinal arteriolar and venular equivalent—was significantly reduced in the acute phase (p < 0.001) with gradual improvement in group B (p < 0.05). Arterial NVC of group A was significantly impaired with diminished dilatation (p < 0.001) and reduced area under the curve (p < 0.01) when compared to group C. Group B showed persistent prolonged latency of arterial dilation (p < 0.05). Venous NVC was significantly delayed after SAH compared to group C (A p < 0.001; B p < 0.05). To our knowledge, this is the first clinical study to document retinal vasoconstriction and impairment of NVC in patients with SAH. Using non-invasive RVA as a translational approach, characteristic patterns of compromise were detected for the arterial and venous compartment of the neurovascular unit in a time-dependent fashion. Recruitment will continue to facilitate a correlation analysis with clinical course and outcome.},
  language  = {en}
}
@techreport{FischedickSchoofHebeletal.2018,
  type      = {Working Paper},
  author    = {Fischedick, Manfred and Schoof, Ren{\´e} and Hebel, Christoph and Merkens, Torsten},
  title     = {Sektorenkopplung als Herausforderung und Chance f{\"u}r das Energieland NRW : Handlungsoptionen und Ergebnispapier der Expertengruppe AG 4 „Sektoren- kopplung" im Netzwerk Netze und Speicher der EnergieAgentur.NRW im Auftrag des Landes Nordrhein-Westfalen / EnergieAgentur.NRW GmbH},
  pages     = {68 Seiten},
  year      = {2018},
  language  = {de}
}
@misc{FriedericiHojdis2018,
  author    = {Friederici, Nadja-Annette and Hojdis, Nils},
  title     = {Fahrzeugreifen},
  year      = {2018},
  abstract  = {Die Erfindung betrifft einen Fahrzeugreifen mit zumindest einem radial außen befindlichen Gummilaufstreifen, Wulstbereichen f{\"u}r den Anschluss an eine Felge und mit auf einer Gummimischung basierenden Seitenwandbereichen zwischen Gummilaufstreifen und den Wulstbereichen. Ferner betrifft die Erfindung Verfahren zur Herstellung solcher Fahrzeugreifen. Um den Anteil der umweltsch{\"a}dlichen Substanzen, insbesondere im Innenstadtbereich, zu reduzieren weisen die Seitenwandbereiche auf der {\"a}ußeren Oberfl{\"a}che eine f{\"u}r den oxidativen Abbau von Molek{\"u}len photokatalytisch aktive Substanz auf.},
  language  = {de}
}
@article{SvaneborgKarimiVarzanehHojdisetal.2018,
  author    = {Svaneborg, Carsten and Karimi-Varzaneh, Hossein Ali and Hojdis, Nils and Fleck, Franz and Everaers, Ralf},
  title     = {Kremer-Grest Models for Universal Properties of Specific Common Polymer Species},
  series = {Soft Condensed Matter},
  journal   = {Soft Condensed Matter},
  number    = {1606.05008},
  year      = {2018},
  abstract  = {The Kremer-Grest (KG) bead-spring model is a near standard in Molecular Dynamic simulations of generic polymer properties. It owes its popularity to its computational efficiency, rather than its ability to represent specific polymer species and conditions. Here we investigate how to adapt the model to match the universal properties of a wide range of chemical polymers species. For this purpose we vary a single parameter originally introduced by Faller and M{\"u}ller-Plathe, the chain stiffness. Examples include polystyrene, polyethylene, polypropylene, cis-polyisoprene, polydimethylsiloxane, polyethyleneoxide and styrene-butadiene rubber. We do this by matching the number of Kuhn segments per chain and the number of Kuhn segments per cubic Kuhn volume for the polymer species and for the Kremer-Grest model. We also derive mapping relations for converting KG model units back to physical units, in particular we obtain the entanglement time for the KG model as function of stiffness allowing for a time mapping. To test these relations, we generate large equilibrated well entangled polymer melts, and measure the entanglement moduli using a static primitive-path analysis of the entangled melt structure as well as by simulations of step-strain deformation of the model melts. The obtained moduli for our model polymer melts are in good agreement with the experimentally expected moduli.},
  language  = {en}
}
@inproceedings{JockwerKleiberUibel2018,
  author    = {Jockwer, R. and Kleiber, M. and Uibel, Thomas},
  title     = {Criteria for Evaluating the Simplification of Design Rules for Dowel-type Fasteners},
  series = {International Network on Timber Engineering Research, INTER : proceedings, meeting 51, 10 - 13 August 2016, Tallinn, Estonia},
  booktitle = {International Network on Timber Engineering Research, INTER : proceedings, meeting 51, 10 - 13 August 2016, Tallinn, Estonia},
  editor    = {G{\"o}rlacher, Rainer},
  publisher = {Timber Scientific Publishing, KIT Holzbau und Baukonstruktionen},
  address   = {Karlsruhe},
  pages     = {461 -- 466},
  year      = {2018},
  language  = {en}
}
@inproceedings{UibelMoorkamp2018,
  author    = {Uibel, Thomas and Moorkamp, Wilfried},
  title     = {Geh- und Radwegbr{\"u}cken in NRW - Bestandsanalyse und Perspektiven},
  series = {Holzbr{\"u}ckenbau in der Offensive : Erhaltung, Ert{\"u}chtigung, Neubauten : 5. Internationale Holzbr{\"u}ckentage (IHB 2018) FILharmonie Filderstadt, Filderstadt/Stuttgart (DE), 17./18. April 2018},
  booktitle = {Holzbr{\"u}ckenbau in der Offensive : Erhaltung, Ert{\"u}chtigung, Neubauten : 5. Internationale Holzbr{\"u}ckentage (IHB 2018) FILharmonie Filderstadt, Filderstadt/Stuttgart (DE), 17./18. April 2018},
  publisher = {forum-holzbau},
  address   = {Biel},
  isbn      = {978-3-906226-19-4},
  pages     = {19 -- 32},
  year      = {2018},
  language  = {de}
}
@inproceedings{DuffnerMoorkampPetersonetal.2018,
  author    = {Duffner, Markus and Moorkamp, Wilfried and Peterson, Leif Arne and Uibel, Thomas},
  title     = {Untersuchungen zur Tragf{\"a}higkeit und Steifigkeit eines neuartigen Wandelements in Holzbauweisen},
  series = {Doktorandenkolloquium Holzbau Forschung + Praxis : Stuttgart, 08./09. M{\"a}rz 2018},
  booktitle = {Doktorandenkolloquium Holzbau Forschung + Praxis : Stuttgart, 08./09. M{\"a}rz 2018},
  editor    = {Kuhlmann, Ulrike},
  publisher = {Universit{\"a}t Stuttgart, Institut f{\"u}r Konstruktion und Entwurf},
  address   = {Stuttgart},
  pages     = {131 -- 139},
  year      = {2018},
  language  = {de}
}
@article{OttenWeberArent2018,
  author    = {Otten, Dennis and Weber, Tobias and Arent, Jan-Christoph},
  title     = {Manufacturing Process Simulation - On Its Way to Industrial Application},
  series = {International Journal of Aviation, Aeronautics, and Aerospace},
  volume    = {5},
  journal   = {International Journal of Aviation, Aeronautics, and Aerospace},
  number    = {2},
  publisher = {Embry-Riddle Aeronautical University},
  address   = {Daytona Beach, Fla.},
  issn      = {2374-6793},
  doi       = {10.15394/ijaaa.2018.1217},
  year      = {2018},
  abstract  = {Manufacturing process simulation (MPS) has become more and more important for aviation and the automobile industry. A highly competitive market requires the use of high performance metals and composite materials in combination with reduced manufacturing cost and time as well as a minimization of the time to market for a new product. However, the use of such materials is expensive and requires sophisticated manufacturing processes. An experience based process and tooling design followed by a lengthy trial-and-error optimization is just not contemporary anymore. Instead, a tooling design process aided by simulation is used more often. This paper provides an overview of the capabilities of MPS in the fields of sheet metal forming and prepreg autoclave manufacturing of composite parts summarizing the resulting benefits for tooling design and manufacturing engineering. The simulation technology is explained briefly in order to show several simplification and optimization techniques for developing industrialized simulation approaches. Small case studies provide examples of an efficient application on an industrial scale.},
  language  = {en}
}
@article{EdipSesovButenwegetal.2018,
  author    = {Edip, K. and Sesov, V. and Butenweg, Christoph and Bojadjieva, J.},
  title     = {Development of coupled numerical model for simulation of multiphase soil},
  series = {Computers and Geotechnics},
  volume    = {96},
  journal   = {Computers and Geotechnics},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0266-352X},
  doi       = {10.1016/j.compgeo.2017.08.016},
  pages     = {118 -- 131},
  year      = {2018},
  abstract  = {In this paper, a coupled multiphase model considering both non-linearities of water retention curves and solid state modeling is proposed. The solid displacements and the pressures of both water and air phases are unknowns of the proposed model. The finite element method is used to solve the governing differential equations. The proposed method is demonstrated through simulation of seepage test and partially consolidation problem. Then, implementation of the model is done by using hypoplasticity for the solid phase and analyzing the fully saturated triaxial experiments. In integration of the constitutive law error controlling is improved and comparisons done accordingly. In this work, the advantages and limitations of the numerical model are discussed.},
  language  = {en}
}
@article{EngelmannBuhlDraacketal.2018,
  author    = {Engelmann, Ulrich M. and Buhl, Eva Miriam and Draack, Sebastian and Viereck, Thilo and Frank, and Schmitz-Rode, Thomas and Slabu, Ioana},
  title     = {Magnetic relaxation of agglomerated and immobilized iron oxide nanoparticles for hyperthermia and imaging applications},
  series = {IEEE Magnetic Letters},
  volume    = {9},
  journal   = {IEEE Magnetic Letters},
  number    = {Article number 8519617},
  publisher = {IEEE},
  address   = {New York, NY},
  issn      = {1949-307X},
  doi       = {10.1109/LMAG.2018.2879034},
  year      = {2018},
  abstract  = {Magnetic nanoparticles (MNPs) are used as therapeutic and diagnostic agents for local delivery of heat and image contrast enhancement in diseased tissue. Besides magnetization, the most important parameter that determines their performance for these applications is their magnetic relaxation, which can be affected when MNPs immobilize and agglomerate inside tissues. In this letter, we investigate different MNP agglomeration states for their magnetic relaxation properties under excitation in alternating fields and relate this to their heating efficiency and imaging properties. With focus on magnetic fluid hyperthermia, two different trends in MNP heating efficiency are measured: an increase by up to 23\% for agglomerated MNP in suspension and a decrease by up to 28\% for mixed states of agglomerated and immobilized MNP, which indicates that immobilization is the dominant effect. The same comparatively moderate effects are obtained for the signal amplitude in magnetic particle spectroscopy.},
  language  = {en}
}
@article{EngelmannRoethEberbecketal.2018,
  author    = {Engelmann, Ulrich M. and Roeth, Anjali A.J. and Eberbeck, Dietmar and Buhl, Eva Miriam and Neumann, Ulf Peter and Schmitz-Rode, Thomas and Slabu, Ioana},
  title     = {Combining Bulk Temperature and Nanoheating Enables Advanced Magnetic Fluid Hyperthermia Efficacy on Pancreatic Tumor Cells},
  series = {Scientific Reports},
  volume    = {8},
  journal   = {Scientific Reports},
  number    = {1},
  publisher = {Springer Nature},
  address   = {Cham},
  issn      = {2045-2322},
  doi       = {10.1038/s41598-018-31553-9},
  pages     = {Article number 13210},
  year      = {2018},
  abstract  = {Many efforts are made worldwide to establish magnetic fluid hyperthermia (MFH) as a treatment for organ-confined tumors. However, translation to clinical application hardly succeeds as it still lacks of understanding the mechanisms determining MFH cytotoxic effects. Here, we investigate the intracellular MFH efficacy with respect to different parameters and assess the intracellular cytotoxic effects in detail. For this, MiaPaCa-2 human pancreatic tumor cells and L929 murine fibroblasts were loaded with iron-oxide magnetic nanoparticles (MNP) and exposed to MFH for either 30 min or 90 min. The resulting cytotoxic effects were assessed via clonogenic assay. Our results demonstrate that cell damage depends not only on the obvious parameters bulk temperature and duration of treatment, but most importantly on cell type and thermal energy deposited per cell during MFH treatment. Tumor cell death of 95\% was achieved by depositing an intracellular total thermal energy with about 50\% margin to damage of healthy cells. This is attributed to combined intracellular nanoheating and extracellular bulk heating. Tumor cell damage of up to 86\% was observed for MFH treatment without perceptible bulk temperature rise. Effective heating decreased by up to 65\% after MNP were internalized inside cells.},
  language  = {en}
}
@article{DigelWehlitzKayseretal.2018,
  author    = {Digel, Ilya and Wehlitz, V. and Kayser, Peter and Figiel-Lange, A. and Bassam, R. and Rundstedt, F. von},
  title     = {Suspension depletion approach for exemption of infected Solanum jasminoides cells from pospiviroids},
  series = {Plant Pathology},
  volume    = {67},
  journal   = {Plant Pathology},
  number    = {2},
  publisher = {Wiley},
  address   = {Oxford},
  issn      = {1365-3059},
  doi       = {10.1111/ppa.12750},
  pages     = {358 -- 365},
  year      = {2018},
  abstract  = {Despite numerous studies, viroid elimination from infected plants remains a very challenging task. This study introduces for the first time a novel 'suspension depletion' approach for exemption of Solanum jasminoides plants from viroids. The proposed method implies initial establishment of suspension cultures of the infected plant cells. The suspended cells were then physically treated (mild thermotherapy, 33 °C), which presumably delayed the replication of the viroid. The viroid concentration in the treated biomass was monitored weekly using pospiviroid-specific PCR. After 10-12 weeks of continuous treatment, a sufficient decrease in viroid concentration was observed such that the infection became undetectable by PCR. The treated single cells then gave rise to microcolonies on a solid culture medium and the obtained viroid-negative clones were further promoted to regenerate into viroid-free plants. Three years of accumulated experimental data suggests feasibility, broad applicability, and good efficacy of the proposed approach.},
  language  = {en}
}
@book{FissabreMatcha2018,
  author    = {Fissabre, Anke and Matcha, Heike},
  title     = {KreuzPlus : zwei Kreuze und zwei M{\"o}bel f{\"u}r die Kreuzkirche in Heinsberg},
  publisher = {Fachbereich Architektur, FH Aachen, University of Applied Science},
  address   = {Aachen},
  isbn      = {978-3-9820371-0-3},
  pages     = {50 Seiten},
  year      = {2018},
  language  = {de}
}
@phdthesis{Bhattarai2018,
  author    = {Bhattarai, Aroj},
  title     = {Constitutive modeling of female pelvic floor dysfunctions and reconstructive surgeries using prosthetic mesh implants},
  isbn      = {978-3-9818074-8-6},
  doi       = {10.17185/duepublico/70340},
  pages     = {192 S.},
  year      = {2018},
  language  = {en}
}
@inproceedings{KromeSander2018,
  author    = {Krome, Cornelia and Sander, Volker},
  title     = {Time series analysis with apache spark and its applications to energy informatics},
  series = {Proceedings of the 7th DACH+ Conference on Energy Informatics},
  booktitle = {Proceedings of the 7th DACH+ Conference on Energy Informatics},
  doi       = {10.1186/s42162-018-0043-1},
  year      = {2018},
  abstract  = {In energy economy forecasts of different time series are rudimentary. In this study, a prediction for the German day-ahead spot market is created with Apache Spark and R. It is just an example for many different applications in virtual power plant environments. Other examples of use as intraday price processes, load processes of machines or electric vehicles, real time energy loads of photovoltaic systems and many more time series need to be analysed and predicted. This work gives a short introduction into the project where this study is settled. It describes the time series methods that are used in energy industry for forecasts shortly. As programming technique Apache Spark, which is a strong cluster computing technology, is utilised. Today, single time series can be predicted. The focus of this work is on developing a method to parallel forecasting, to process multiple time series simultaneously with R and Apache Spark.},
  language  = {en}
}
@inproceedings{BlankeDringVonteinetal.2018,
  author    = {Blanke, Tobias and Dring, Bernd and Vontein, Marius and Kuhnhenne, Markus},
  title     = {Climate Change Mitigation Potentials of Vertical Building Integrated Photovoltaic},
  series = {8th International Workshop on Integration of Solar Power into Power Systems : 16-17 October 2018, Stockholm, Sweden},
  booktitle = {8th International Workshop on Integration of Solar Power into Power Systems : 16-17 October 2018, Stockholm, Sweden},
  pages     = {1 -- 7},
  year      = {2018},
  language  = {en}
}
@incollection{Finkenberger2018,
  author    = {Finkenberger, Isabel Maria},
  title     = {Schwellenreiten},
  series = {Prozesse reflexiven Entwerfens : Entwerfen und Forschen in Architektur und Landschaft},
  booktitle = {Prozesse reflexiven Entwerfens : Entwerfen und Forschen in Architektur und Landschaft},
  editor    = {Buchert, Margitta},
  publisher = {JOVIS Verlag},
  address   = {Berlin},
  isbn      = {978-3-86859-558-1},
  pages     = {208 -- 226},
  year      = {2018},
  language  = {de}
}
@inproceedings{UlmerBraunWollert2018,
  author    = {Ulmer, Jessica and Braun, Sebastian and Wollert, J{\"o}rg},
  title     = {Generische IoT Adapter f{\"u}r semantische Maschinenschnittstellen},
  series = {Internet of Things - vom Sensor bis zur Cloud},
  booktitle = {Internet of Things - vom Sensor bis zur Cloud},
  pages     = {1 -- 5},
  year      = {2018},
  language  = {de}
}
@article{ErmolaevNivokovMelnikovaetal.2018,
  author    = {Ermolaev, A.P. and Nivokov, I.A. and Melnikova, L.I. and Kotliar, Konstantin},
  title     = {Сравнительная характеристика химического состава витреального содержимого кадаверных глаз и глаз с рефрактерной терминальной глаукомой},
  series = {Vestnik oftalmologii},
  volume    = {5},
  journal   = {Vestnik oftalmologii},
  number    = {2},
  publisher = {Media Sfera},
  address   = {Moskau},
  doi       = {10.17116/oftalma2018134051195},
  pages     = {195 -- 201},
  year      = {2018},
  abstract  = {Purpose — to compare the chemical elemental composition of vitreous cavity content taken from cadaveric eyes compared to samples taken from the eyes with terminal stage refractory glaucoma with decompensated intraocular pressure (IOP). Material and methods. The vitreous contents of the eyes from 2 groups were studied. The 1st group included 15 cadaveric eyes; the 2nd group included 15 eyes with refractory glaucoma in the terminal stage of the disease with decompensated IOP in patients with hypertension pain. The vitreal content samples were taken in the course of antiglaucoma surgery aimed at preserving the eye as an organ and involving employment of drainage in the vitreous cavity. The study of virtual contents was carried out on energy dispersive spectrometer Oxford X-Max 50 integrated into scanning electron microscope Zeiss EVO LS10. Results. Increased concentrations of Kalium and Phosphorus were detected in the vitreous content of cadaveric eyes compared with the vitreal content from the eyes with terminal glaucoma with decompensated IOP taken in vivo (K — 0.172/0.093; P — 0.045/0.025 mmol/L). In the vitreous cavity in the eyes with end-stage glaucoma with decompensated IOP, the concentration of Nitrogen was higher in comparison with human cadaver eyes (2.030/1.424 mmol/L). Conclusion. The increased concentrations of Kalium and Phosphorus in the vitreous content of cadaveric eyes is associated with postmortem autolytic processes and with the release of intracellular content in the destruction of cell membranes. The increased Nitrogen concentration in the vitreal contents of the eyes with terminal stage glaucoma with decompensated IOP may be associated with the presence of osmotically active nitrogen-containing compounds in the eyes with increased IOP.},
  language  = {ru}
}
@article{HofmannLimpertMatareetal.2018,
  author    = {Hofmann, Till and Limpert, Nicolas and Matar{\´e}, Victor and Sch{\"o}nitz, Sebastian and Niemueller, Tim and Ferrein, Alexander and Lakemeyer, Gerhard},
  title     = {The Carologistics RoboCup Logistics Team 2018},
  year      = {2018},
  abstract  = {The Carologistics team participates in the RoboCup Logistics League for the seventh year. The RCLL requires precise vision, manipulation and path planning, as well as complex high-level decision making and multi-robot coordination. We outline our approach with an emphasis on recent modifications to those components. The team members in 2018 are David Bosen, Christoph Gollok, Mostafa Gomaa, Daniel Habering, Till Hofmann, Nicolas Limpert, Sebastian Sch{\"o}nitz, Morian Sonnet, Carsten Stoffels, and Tarik Viehmann. This paper is based on the last year's team description.},
  language  = {en}
}
@article{BirklDiendorferKernetal.2018,
  author    = {Birkl, Josef and Diendorfer, Gerhard and Kern, Alexander and Thern, Stephan},
  title     = {Extrem hohe Blitzstr{\"o}me},
  series = {Elektropraktiker},
  volume    = {72},
  journal   = {Elektropraktiker},
  number    = {3},
  publisher = {Huss Medien},
  address   = {Berlin},
  pages     = {217 -- 225},
  year      = {2018},
  abstract  = {Blitze sind nach wie vor eine enorme Schadensquelle f{\"u}r Personensch{\"a}den, Br{\"a}nde, mechanische Zerst{\"o}rungen und insbesondere auch {\"U}berspannungen. Das zeigen nicht zuletzt aktuelle Statistiken der Schadensversicherer. Immer wieder gibt es Meldungen {\"u}ber extrem hohe Blitzstr{\"o}me, die nat{\"u}rlich auch zu großen Sch{\"a}den und Zerst{\"o}rungen f{\"u}hren k{\"o}nnen. Dabei werden Scheitelwerte von teilweise deutlich {\"u}ber 300 kA genannt. Dies wirft Fragen auf, da die „klassische" Blitzstatistik (z. B. nach CIGRE und IEC [8][10]) bisher solche Werte nicht kennt. Diese extremen Blitzstr{\"o}me werden meist aus den Daten von Blitzortungssystemen ermittelt.},
  language  = {de}
}
@article{MatchaLjubasGueldemet2018,
  author    = {Matcha, Heike and Ljubas, Ante and Gueldemet, Harun},
  title     = {Printing a Coffee Bar: An investigation into mid-scale 3D printing},
  series = {Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018},
  journal   = {Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018},
  editor    = {Kepczynska-Walczak, A.},
  pages     = {59 -- 68},
  year      = {2018},
  abstract  = {We present and discuss an exploration of the possibilities and properties of 3D printing with a printing space of 1 cubic meter, and how those can be integrated into architectural education through an experimental design and research course with students of architecture.We expand on issues presented at the eCAADe conference 2017 in Rome [Ref 6] by increasing the complexity and size of our prints, printing not a model to scale, but a full scale funtional prototype of a usable architectural object: A coffee bar.},
  language  = {en}
}
@article{KoenigWolf2018,
  author    = {K{\"o}nig, Johannes Alexander and Wolf, Martin R.},
  title     = {GHOST: An Evaluated Competence Developing Game for Cybersecurity Awareness Training},
  series = {International Journal on Advances in Security},
  volume    = {11},
  journal   = {International Journal on Advances in Security},
  number    = {3 \& 4},
  publisher = {IARIA Journals},
  issn      = {1942-2636},
  pages     = {274 -- 287},
  year      = {2018},
  abstract  = {To train end users how to interact with digital systems is indispensable to ensure a strong computer security. 'Competence Developing Game'-based approaches are particularly suitable for this purpose because of their motivation-and simulation-aspects. In this paper the Competence Developing Game 'GHOST' for cybersecurity awareness trainings and its underlying patterns are described. Accordingly, requirements for an 'Competence Developing Game' based training are discussed. Based on these requirements it is shown how a game can fulfill these requirements. A supplementary game interaction design and a corresponding evaluation study is shown. The combination of training requirements and interaction design is used to create a 'Competence Developing Game'-based training concept. A part of these concept is implemented into a playable prototype that serves around one hour of play respectively training time. This prototype is used to perform an evaluation of the game and training aspects of the awareness training. Thereby, the quality of the game aspect and the effectiveness of the training aspect are shown.},
  language  = {en}
}
@inproceedings{BosseDeClercqBarnat2018,
  author    = {Bosse, Elke and De Clercq, Mikael and Barnat, Miriam},
  title     = {The Role of Diversity for the Transition to Higher Education},
  series = {EARLI SIG 4, Giessen},
  booktitle = {EARLI SIG 4, Giessen},
  pages     = {13 Folien},
  year      = {2018},
  language  = {en}
}
@incollection{SchoeningWagnerPoghossianetal.2018,
  author    = {Sch{\"o}ning, Michael Josef and Wagner, Torsten and Poghossian, Arshak and Miyamoto, K.I. and Werner, C.F. and Krause, S. and Yoshinobu, T.},
  title     = {Light-addressable potentiometric sensors for (bio-)chemical sensing and imaging},
  series = {Encyclopedia of Interfacial Chemistry: Surface Science and Electrochemistry. Vol. 7},
  booktitle = {Encyclopedia of Interfacial Chemistry: Surface Science and Electrochemistry. Vol. 7},
  publisher = {Elsevier},
  address   = {Amsterdam},
  isbn      = {9780128097397},
  pages     = {295 -- 308},
  year      = {2018},
  language  = {en}
}
@inproceedings{WaldmannVeraDachwaldetal.2018,
  author    = {Waldmann, Christoph and Vera, Jean-Pierre de and Dachwald, Bernd and Strasdeit, Henry and Sohl, Frank and Hanff, Hendrik and Kowalski, Julia and Heinen, Dirk and Macht, Sabine and Bestmann, Ulf and Meckel, Sebastian and Hildebrandt, Marc and Funke, Oliver and Gehrt, Jan-J{\"o}ran},
  title     = {Search for life in ice-covered oceans and lakes beyond Earth},
  series = {2018 IEEE/OES Autonomous Underwater Vehicle Workshop, Proceedings November 2018, Article number 8729761},
  booktitle = {2018 IEEE/OES Autonomous Underwater Vehicle Workshop, Proceedings November 2018, Article number 8729761},
  doi       = {10.1109/AUV.2018.8729761},
  year      = {2018},
  abstract  = {The quest for life on other planets is closely connected with the search for water in liquid state. Recent discoveries of deep oceans on icy moons like Europa and Enceladus have spurred an intensive discussion about how these waters can be accessed. The challenge of this endeavor lies in the unforeseeable requirements on instrumental characteristics both with respect to the scientific and technical methods. The TRIPLE/nanoAUV initiative is aiming at developing a mission concept for exploring exo-oceans and demonstrating the achievements in an earth-analogue context, exploring the ocean under the ice shield of Antarctica and lakes like Dome-C on the Antarctic continent.},
  language  = {en}
}
@inproceedings{GorzalkaDahlkeGoettscheetal.2018,
  author    = {Gorzalka, Philip and Dahlke, Dennis and G{\"o}ttsche, Joachim and Israel, Martin and Patel, Dhruvkumar and Prahl, Christoph and Schmiedt, Jacob Estevam and Frommholz, Dirk and Hoffschmidt, Bernhard and Linkiewicz, Magdalena},
  title     = {Building Tomograph-From Remote Sensing Data of Existing Buildings to Building Energy Simulation Input},
  series = {EBC, Annex 71, Fifth expert meeting, October 17-19, 2018, Innsbruck, Austria},
  booktitle = {EBC, Annex 71, Fifth expert meeting, October 17-19, 2018, Innsbruck, Austria},
  pages     = {17 Seiten},
  year      = {2018},
  language  = {en}
}
@article{JochimMenzel2018,
  author    = {Jochim, Haldor E. and Menzel, Christoph J.},
  title     = {Die Trassenb{\"u}ndelung als Planungsmethode nachhaltiger Verkehrspolitik},
  series = {Der Eisenbahningenieur : EI},
  volume    = {69},
  journal   = {Der Eisenbahningenieur : EI},
  number    = {11},
  publisher = {DVV Media Group},
  address   = {Hamburg},
  issn      = {0013-2810},
  pages     = {26 -- 31},
  year      = {2018},
  language  = {de}
}
@incollection{RoethPielen2018,
  author    = {R{\"o}th, Thilo and Pielen, Michael},
  title     = {Personal Public Vehicle - ein urbanes Fahrzeugkonzept f{\"u}r die „Shared Mobility" der Zukunft},
  series = {Karosseriebautage Hamburg 2018, 16. ATZ-Fachtagung},
  booktitle = {Karosseriebautage Hamburg 2018, 16. ATZ-Fachtagung},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  doi       = {10.1007/978-3-658-22038-9_13},
  pages     = {189 -- 199},
  year      = {2018},
  abstract  = {Die urbane Mobilit{\"a}t ist im Wandel und insbesondere neue innovative Gesch{\"a}ftsmodelle werden einen wesentlichen Teil zur L{\"o}sung von k{\"u}nftigen Mobilit{\"a}tsbed{\"u}rfnissen beitragen. Die sogenannte „Shared Mobility" gilt aktuell neben der Elektrifizierung des Antriebes und autonomem Fahrzeugtechnologien als einer der wichtigsten Trendthemen in der Automobilindustrie. Neue Mobilit{\"a}tsdienstleistungen verlangen dabei verst{\"a}rkt auch neue Fahrzeugkonzepte.},
  language  = {de}
}
@inproceedings{BirklDiendorferKernetal.2018,
  author    = {Birkl, Josef and Diendorfer, Gerhard and Kern, Alexander and Thern, Stephan},
  title     = {Extremely high lightning peak currents},
  series = {34th International Conference on Ligntning Protection, 02-07 September 2018},
  booktitle = {34th International Conference on Ligntning Protection, 02-07 September 2018},
  isbn      = {978-1-5386-6635-7},
  pages     = {7 Seiten},
  year      = {2018},
  language  = {en}
}
@article{PuppeGiulianoFrantzetal.2018,
  author    = {Puppe, Michael and Giuliano, Stefano and Frantz, Cathy and Uhlig, Ralf and Schumacher, Ralph and Ibraheem, Wagdi and Schmalz, Stefan and Waldmann, Barbara and Guder, Christoph and Peter, Dennis and Schwager, Christian and Teixeira Boura, Cristiano Jos{\´e} and Alexopoulos, Spiros and Spiegel, Michael and Wortmann, J{\"u}rgen and Hinrichs, Matthias and Engelhard, Manfred and Aust, Michael},
  title     = {Techno-economic optimization of molten salt solar tower plants},
  series = {AIP Conference Proceedings art.no. 040033},
  volume    = {2033},
  journal   = {AIP Conference Proceedings art.no. 040033},
  number    = {Issue 1},
  publisher = {AIP Publishing},
  address   = {Melville, NY},
  doi       = {10.1063/1.5067069},
  year      = {2018},
  abstract  = {In this paper the results of a techno-economic analysis of improved and optimized molten salt solar tower plants (MSSTP plants) are presented. The potential improvements that were analyzed include different receiver designs, different designs of the HTF-system and plant control, increased molten salt temperatures (up to 640°C) and multi-tower systems. Detailed technological and economic models of the solar field, solar receiver and high temperature fluid system (HTF-system) were developed and used to find potential improvements compared to a reference plant based on Solar Two technology and up-to-date cost estimations. The annual yield model calculates the annual outputs and the LCOE of all variants. An improved external tubular receiver and improved HTF-system achieves a significant decrease of LCOE compared to the reference. This is caused by lower receiver cost as well as improvements of the HTF-system and plant operation strategy, significantly reducing the plant own consumption. A novel star receiver shows potential for further cost decrease. The cavity receiver concepts result in higher LCOE due to their high investment cost, despite achieving higher efficiencies. Increased molten salt temperatures seem possible with an adapted, closed loop HTF-system and achieve comparable results to the original improved system (with 565°C) under the given boundary conditions. In this analysis all multi tower systems show lower economic viability compared to single tower systems, caused by high additional cost for piping connections and higher cost of the receivers. REFERENCES},
  language  = {en}
}
@book{TuennemannAzzab2018,
  author    = {T{\"u}nnemann, Thomas and Azzab, Miriam},
  title     = {Sulla Strada : Workshop Formine 2018},
  publisher = {FH Aachen, Fachbereich Architektur},
  address   = {Aachen},
  isbn      = {978-3-9820159-0-3},
  publisher      = {Fachhochschule Aachen},
  pages     = {122 Seiten},
  year      = {2018},
  abstract  = {Impressum | Inhalt 03 Thomas T{\"u}nnemann | Unterwegs...am Wege 04 Projekte 06 Annelie Wirtz | Arrivato 08 Sebastian Rupp | Tracce Passate 18 Henri Boh | Terrazze sopra il lago 28 Hermann Stuzmann | L´Ammissione {\`e} Gratuita 32 Vivienne Scheidz | IL Potere dei Simboli 34 Felix Keller | Strada Infinita 38 Moran Dorner | Catturato nel Posto 42 Kevin Osterkamp | Vortice 46 Kristina Foidle | La Vespa e il Fico 52 Simon Rix | Sognare Sulla Strada 58 Jennifer Sikora | Strada Pietrosa 66 Sabrina Fr{\"o}mbgen | Bolla di Pensiero 72 Miriam Azzab | Il Momento 78 Georg M{\"o}rke | Sentiero stretto 84 Saskia Fr{\"o}mbgen | Nuova Prospetiva 90 Frank Drehsen | A grado a grado 96 Caronlin Gr{\"u}n | Le prospettive 100 Thomas T{\"u}nnemann | Flusso nella Foresta 104 Atmosph{\"a}risches Auf die K{\"u}che | Kulinarisches 114 Carpe Diem | Fotografisches 116},
  language  = {de}
}
@inproceedings{GrundmannBauerBorchersetal.2018,
  author    = {Grundmann, Jan Thimo and Bauer, Waldemar and Borchers, Kai and Dumont, Etienne and Grimm, Christian D. and Ho, Tra-Mi and Jahnke, Rico and Lange, Caroline and Maiwald, Volker and Mikulz, Eugen and Quantius, Dominik and Reershemius, Siebo and Renger, Thomas and Riemann, Johannes and Sasaki, Kaname and Seefeldt, Patric and Spietz, Peter and Spr{\"o}witz, Tom and Toth, Norbert and Wejmo, Elisabet and Biele, Jens and Krause, Christian and Cerotti, Matteo and Peloni, Alessandro and Dachwald, Bernd},
  title     = {Small Spacecraft Solar Sailing for Small Solar System Body Multiple Rendezvous and Landing},
  series = {2018 IEEE Aerospace Conference : 3-10 March 2018},
  booktitle = {2018 IEEE Aerospace Conference : 3-10 March 2018},
  isbn      = {978-1-5386-2014-4},
  pages     = {20 Seiten},
  year      = {2018},
  language  = {en}
}
@article{KlubertMalechaSparla2018,
  author    = {Klubert, Joachim and Malecha, Hartmut and Sparla, Peter},
  title     = {Modernisierung der geod{\"a}tischen Messtechnik der Urfttalsperre},
  series = {Wasserwirtschaft},
  volume    = {108},
  journal   = {Wasserwirtschaft},
  number    = {10},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  issn      = {0043-0978},
  pages     = {14 -- 18},
  year      = {2018},
  language  = {de}
}
@inproceedings{GoettenHavermannBraunetal.2018,
  author    = {G{\"o}tten, Falk and Havermann, Marc and Braun, Carsten and Gomez, Francisco and Bil, Cees},
  title     = {On the Applicability of Empirical Drag Estimation Methods for Unmanned Air Vehicle Design Read More: https://arc.aiaa.org/doi/10.2514/6.2018-3192},
  series = {2018 Aviation Technology, Integration, and Operations Conference, AIAA AVIATION Forum},
  booktitle = {2018 Aviation Technology, Integration, and Operations Conference, AIAA AVIATION Forum},
  issn      = {1533-385X},
  doi       = {10.2514/6.2018-3192},
  pages     = {Article 3192},
  year      = {2018},
  language  = {en}
}
@inproceedings{RuettersWeinheimerBragard2018,
  author    = {R{\"u}tters, Ren{\´e} and Weinheimer, Marius and Bragard, Michael},
  title     = {Teaching Control Theory with a Simplified Helicopter Model and a Classroom Fitting Hardware Test-Bench},
  series = {2018 IEEE 59th International Scientific Conference on Power and Electrical Engineering of Riga Technical University (RTUCON)},
  booktitle = {2018 IEEE 59th International Scientific Conference on Power and Electrical Engineering of Riga Technical University (RTUCON)},
  isbn      = {978-1-5386-6903-7},
  doi       = {10.1109/RTUCON.2018.8659871},
  year      = {2018},
  language  = {en}
}
@inproceedings{BragardHoekHoegenetal.2018,
  author    = {Bragard, Michael and Hoek, Hauke van and Hoegen, Anne von and Doncker, Rik W. De},
  title     = {Motivation-based Learning: Teaching Fundamentals of Electrical Engineering with an LED Spinning Top},
  series = {2018 IEEE 59th International Scientific Conference on Power and Electrical Engineering of Riga Technical University (RTUCON)},
  booktitle = {2018 IEEE 59th International Scientific Conference on Power and Electrical Engineering of Riga Technical University (RTUCON)},
  isbn      = {978-1-5386-6903-7},
  doi       = {10.1109/RTUCON.2018.8659810},
  pages     = {1 -- 6},
  year      = {2018},
  language  = {en}
}