@inproceedings{ReckerBosschaertsWagemakersetal.2010,
  author    = {Recker, Elmar and Bosschaerts, Walter and Wagemakers, Rolf and Hendrick, Patrick and Funke, Harald and B{\"o}rner, Sebastian},
  title     = {Experimental study of a round jet in cross-flow at low momentum ratio},
  pages     = {13 Seiten},
  year      = {2010},
  abstract  = {With the final objective of optimizing the "Micromix" hydrogen combustion principle, a round jet in a laminar cross-flow prior to its combustion is investigated experimentally using Stereoscopic Particle Image Velocimetry. Measurements are performed at a jet to cross-stream momentum ratio of 1 and a Reynolds number, based on the jet diameter and jet velocity, of 1600. The suitability to combine side, top and end views is analyzed statistically. The statistical theory of testing hypotheses, pertaining to the joint distribution of the averaged velocity along intersecting observation planes, is employed. Overall, the averaged velocity fields of the varying observation planes feature homogeneity at a 0.05 significance level. Minor discrepancies are related to the given experimental conditions. By use of image maps, averaged and instantaneous velocity fields, an attempt is made to elucidate the flow physics and a kinematically consistent vortex model is proposed. In the time-averaged flow field, the principal vortical systems were identified and the associated mixing visualized. The jet trajectory and physical dimensions scale with the momentum ratio times the jet diameter. The jet/cross-flow mixture converging upon the span-wise centre-line, the lifting action of the Counter Rotating Vortex Pair and the reversed flow region contribute to the high entrainment and mixedness. It is shown that the jet width is larger on the downstream side as compared to the upstream side of the centre-streamline. The deepest penetration of the particles on the outer boundary occurs in the centre-plane. Meanwhile, with increasing off-centre position, the boundaries all lay further from the centre-line position than does the boundary in the centre-plane, corresponding to a kidney-like shape of the flow cross-section. The generation of the Counter Rotating Vortex Pair and the instability mechanism is documented by instantaneous image maps and vector fields. The necessary circulation for the Counter Rotating Vortex Pair originates from a combined effect of steady in-hole, hanging and wake vortices. The strong cross-flow and jet interaction induces a three-dimensional waving, the stream-wise Counter Rotating Vortex Pair pair, leading to the formation of Ring Like Vortices. A secondary Counter Rotating Vortex Pair forms on top of the primary Counter Rotating Vortex Pair, resulting in mixing by "puffs". Overall, Stereoscopic Particle Image Velocimetry proofed capable of elucidating the Jet in Cross-Flow complex flow field. The gained insight in the mixing process will definitely contribute to the "Micromix" hydrogen combustion optimization.},
  language  = {en}
}
@inproceedings{FunkeBoernerHendricketal.2013,
  author    = {Funke, Harald and B{\"o}rner, Sebastian and Hendrick, P. and Recker, E. and Elsing, R.},
  title     = {Development and integration of a scalable low NOx combustion chamber for a hydrogen fuelled aero gas turbine},
  series = {Progress in Propulsion Physics. - Vol. 4},
  booktitle = {Progress in Propulsion Physics. - Vol. 4},
  editor    = {DeLuca, Luigi T.},
  publisher = {EDP Sciences},
  address   = {[Les Ulis]},
  isbn      = {978-2-7598-0876-2},
  doi       = {10.1051/eucass/201304357},
  pages     = {357 -- 372},
  year      = {2013},
  language  = {en}
}
@inproceedings{FunkeBoernerRobinsonetal.2010,
  author    = {Funke, Harald and B{\"o}rner, Sebastian and Robinson, A. and Hendrick, P. and Recker, E.},
  title     = {Low NOx H2 combustion for industrial gas turbines of various power ranges},
  year      = {2010},
  language  = {en}
}
@inproceedings{FunkeRobinsonHendricketal.2010,
  author    = {Funke, Harald and Robinson, A. E. and Hendrick, P. and Wagemakers, R.},
  title     = {Design and Testing of a Micromix Combustor With Recuperative Wall Cooling for a Hydrogen Fuelled µ-Scale Gas Turbine},
  series = {Conference Proceedings ASME Turbo Expo 2010: Power for Land, Sea, and Air. Volume 5: Industrial and Cogeneration; Microturbines and Small Turbomachinery; Oil and Gas Applications; Wind Turbine Technology},
  booktitle = {Conference Proceedings ASME Turbo Expo 2010: Power for Land, Sea, and Air. Volume 5: Industrial and Cogeneration; Microturbines and Small Turbomachinery; Oil and Gas Applications; Wind Turbine Technology},
  publisher = {ASME},
  address   = {New York, NY},
  isbn      = {978-0-7918-4400-7},
  doi       = {10.1115/GT2010-23453},
  pages     = {587 -- 596},
  year      = {2010},
  abstract  = {For more than a decade up to now there is an ongoing interest in small gas turbines downsized to micro-scale. With their high energy density they offer a great potential as a substitute for today's unwieldy accumulators, found in a variety of applications like laptops, small tools etc. But micro-scale gas turbines could not only be used for generating electricity, they could also produce thrust for powering small unmanned aerial vehicles (UAVs) or similar devices. Beneath all the great design challenges with the rotating parts of the turbomachinery at this small scale, another crucial item is in fact the combustion chamber needed for a safe and reliable operation. With the so called regular micromix burning principle for hydrogen successfully downscaled in an initial combustion chamber prototype of 10 kW energy output, this paper describes a new design attempt aimed at the integration possibilities in a μ-scale gas turbine. For manufacturing the combustion chamber completely out of stainless steel components, a recuperative wall cooling was introduced to keep the temperatures in an acceptable range. Also a new way of an integrated ignition was developed. The detailed description of the prototype's design is followed by an in depth report about the test results. The experimental investigations comprise a set of mass flow variations, coupled with a variation of the equivalence ratio for each mass flow at different inlet temperatures and pressures. With the data obtained by an exhaust gas analysis, a full characterisation concerning combustion efficiency and stability of the prototype chamber is possible. Furthermore the data show a full compliance with the expected operating requirements of the designated μ-scale gas turbine.},
  language  = {en}
}
@inproceedings{Ferrein2010,
  author    = {Ferrein, Alexander},
  title     = {golog.lua: Towards a non-prolog implementation of Golog for embedded systems},
  series = {Dagstuhl Seminar Proceedings, Volume 10081},
  booktitle = {Dagstuhl Seminar Proceedings, Volume 10081},
  doi       = {10.4230/DagSemProc.10081.9},
  pages     = {1 -- 15},
  year      = {2010},
  abstract  = {Among many approaches to address the high-level decision making problem for autonomous robots and agents, the robot program¬ming and plan language Golog follows a logic-based deliberative approach, and its successors were successfully deployed in a number of robotics applications over the past ten years. Usually, Golog interpreter are implemented in Prolog, which is not available for our target plat¬form, the bi-ped robot platform Nao. In this paper we sketch our first approach towards a prototype implementation of a Golog interpreter in the scripting language Lua. With the example of the elevator domain we discuss how the basic action theory is specified and how we implemented fluent regression in Lua. One possible advantage of the availability of a Non-Prolog implementation of Golog could be that Golog becomes avail¬able on a larger number of platforms, and also becomes more attractive for roboticists outside the Cognitive Robotics community.},
  language  = {en}
}
@inproceedings{FerreinSteinbauer2010,
  author    = {Ferrein, Alexander and Steinbauer, Gerald},
  title     = {On the Way to High-Level Programming for Resource-Limited Embedded Systems with Golog},
  series = {Simulation, Modeling, and Programming for Autonomous Robots},
  booktitle = {Simulation, Modeling, and Programming for Autonomous Robots},
  publisher = {Springer},
  address   = {Berlin},
  doi       = {10.1007/978-3-642-17319-6_23},
  pages     = {229 -- 240},
  year      = {2010},
  abstract  = {In order to allow an autonomous robot to perform non-trivial tasks like to explore a foreign planet the robot has to have deliberative capabilities like reasoning or planning. Logic-based approaches like the programming and planing language Golog and it successors has been successfully used for such decision-making problems. A drawback of this particular programing language is that their interpreter usually are written in Prolog and run on a Prolog back-end. Such back-ends are usually not available or feasible on resource-limited robot systems. In this paper we present our ideas and first results of a re-implementation of the interpreter based on the Lua scripting language which is available on a wide range of systems including small embedded systems.},
  language  = {en}
}
@inproceedings{RensVarzinczakMeyeretal.2010,
  author    = {Rens, Gavin and Varzinczak, Ivan and Meyer, Thomas and Ferrein, Alexander},
  title     = {A Logic for Reasoning about Actions and Explicit Observations},
  series = {AI 2010: Advances in Artificial Intelligence},
  booktitle = {AI 2010: Advances in Artificial Intelligence},
  publisher = {Springer},
  address   = {Berlin},
  doi       = {10.1007/978-3-642-17432-2_40},
  pages     = {395 -- 404},
  year      = {2010},
  abstract  = {We propose a formalism for reasoning about actions based on multi-modal logic which allows for expressing observations as first-class objects. We introduce a new modal operator, namely [o |α], which allows us to capture the notion of perceiving an observation given that an action has taken place. Formulae of the type [o |α]ϕ mean 'after perceiving observation o, given α was performed, necessarily ϕ'. In this paper, we focus on the challenges concerning sensing with explicit observations, and acting with nondeterministic effects. We present the syntax and semantics, and a correct and decidable tableau calculus for the logic},
  language  = {en}
}
@inproceedings{NiemuellerFerreinBecketal.2010,
  author    = {Niem{\"u}ller, Tim and Ferrein, Alexander and Beck, Daniel and Lakemeyer, Gerhard},
  title     = {Design principles of the component-based robot software framework Fawkes},
  series = {Simulation, Modeling, and Programming for Autonomous Robots},
  booktitle = {Simulation, Modeling, and Programming for Autonomous Robots},
  publisher = {Springer},
  address   = {Berlin},
  doi       = {10.1007/978-3-642-17319-6_29},
  pages     = {300 -- 311},
  year      = {2010},
  abstract  = {The idea of component-based software engineering was proposed more that 40 years ago, yet only few robotics software frameworks follow these ideas. The main problem with robotics software usually is that it runs on a particular platform and transferring source code to another platform is crucial. In this paper, we present our software framework Fawkes which follows the component-based software design paradigm by featuring a clear component concept with well-defined communication interfaces. We deployed Fawkes on several different robot platforms ranging from service robots to biped soccer robots. Following the component concept with clearly defined communication interfaces shows great benefit when porting robot software from one robot to the other. Fawkes comes with a number of useful plugins for tasks like timing, logging, data visualization, software configuration, and even high-level decision making. These make it particularly easy to create and to debug productive code, shortening the typical development cycle for robot software.},
  language  = {en}
}
@inproceedings{NiemuellerFerreinLakemeyer2010,
  author    = {Niem{\"u}ller, Tim and Ferrein, Alexander and Lakemeyer, Gerhard},
  title     = {A Lua-based behavior engine for controlling the humanoid robot Nao},
  series = {RoboCup 2009: Robot Soccer World Cup XIII},
  booktitle = {RoboCup 2009: Robot Soccer World Cup XIII},
  publisher = {Springer},
  address   = {Berlin},
  doi       = {10.1007/978-3-642-11876-0_21},
  pages     = {240 -- 251},
  year      = {2010},
  abstract  = {The high-level decision making process of an autonomous robot can be seen as an hierarchically organised entity, where strategical decisions are made on the topmost layer, while the bottom layer serves as driver for the hardware. In between is a layer with monitoring and reporting functionality. In this paper we propose a behaviour engine for this middle layer which, based on formalism of hybrid state machines (HSMs), bridges the gap between high-level strategic decision making and low-level actuator control. The behaviour engine has to execute and monitor behaviours and reports status information back to the higher level. To be able to call the behaviours or skills hierarchically, we extend the model of HSMs with dependencies and sub-skills. These Skill-HSMs are implemented in the lightweight but expressive Lua scripting language which is well-suited to implement the behaviour engine on our target platform, the humanoid robot Nao.},
  language  = {en}
}
@inproceedings{HillgaertnerKappel2006,
  author    = {Hillg{\"a}rtner, Michael and Kappel, U.},
  title     = {Radiating Impedance of Mains Cabling During Emissions Testing},
  series = {Proceedings of EMC Europe 2006 Barcelona : International Symposium on Electromagnetic Compatibility},
  booktitle = {Proceedings of EMC Europe 2006 Barcelona : International Symposium on Electromagnetic Compatibility},
  address   = {Barcelona},
  isbn      = {84-689-9439-1},
  pages     = {17 -- 22},
  year      = {2006},
  language  = {en}
}
@inproceedings{BoernerFunkeHendricketal.2010,
  author    = {B{\"o}rner, Sebastian and Funke, Harald and Hendrick, P. and Recker, E.},
  title     = {Control system modifications for a hydrogen fuelled gas-turbine},
  series = {Proceedings of ISROMAC 13},
  booktitle = {Proceedings of ISROMAC 13},
  publisher = {Curran},
  address   = {Red Hook, NY},
  isbn      = {978-1-617-38848-4},
  pages     = {665 -- 670},
  year      = {2010},
  language  = {en}
}
@inproceedings{GeimerSauerbornHoffschmidtetal.2010,
  author    = {Geimer, Konstantin and Sauerborn, Markus and Hoffschmidt, Bernhard and Schmitz, Mark and G{\"o}ttsche, Joachim},
  title     = {Test facility for absorber specimens of solar tower power plants},
  series = {Advances in Science and Technology},
  volume    = {74},
  booktitle = {Advances in Science and Technology},
  publisher = {Trans Tech Publications},
  address   = {Baech},
  doi       = {10.4028/www.scientific.net/AST.74.266},
  pages     = {266 -- 271},
  year      = {2010},
  abstract  = {The Solar-Institute J{\"u}lich (SIJ) has initiated the construction of the first and only German solar tower power plant and is now involved in the accompanying research. The power plant for experimental and demonstration purposes in the town of J{\"u}lich started supplying electric energy in the beginning of 2008. The central receiver plant features as central innovation an open volumetric receiver, consisting of porous ceramic elements that simultaneously absorb the concentrated sunlight and transfer the heat to ambient air passing through the pores so that an average temperature of 680°C is reached. The subsequent steam cycle generates up to 1.5 MWe. A main field of research at the SIJ is the optimization of the absorber structures. To analyze the capability of new absorber specimens a special test facility was developed and set up in the laboratory. A high-performance near-infrared radiator offers for single test samples a variable and repeatable beam with a power of up to 320 kW/m² peak. The temperatures achieved on the absorber surface can reach more than 1000°C. To suck ambient air through the open absorber - like on the tower - it is mounted on a special blower system. An overview about the test facility and some recent results will be presented.},
  language  = {en}
}
@inproceedings{PoghossianWagnerSchoening2010,
  author    = {Poghossian, Arshak and Wagner, Holger and Sch{\"o}ning, Michael Josef},
  title     = {Automatisiertes „wafer level"-Testsystem zur Charakterisierung von siliziumbasierten Chemo- und Biosensoren},
  series = {Tagungsband: Sensoren und Messsysteme 2010},
  booktitle = {Tagungsband: Sensoren und Messsysteme 2010},
  publisher = {VDE Verlag},
  address   = {Berlin},
  isbn      = {978-3-8007-3260-9},
  pages     = {89 -- 92},
  year      = {2010},
  abstract  = {Es wurde ein automatisiertes, computerunterst{\"u}tztes Testsystem f{\"u}r die Funktionspr{\"u}fung und Charakterisierung von (bio-)chemischen Sensoren auf Waferebene entwickelt und in einen konventionellen Spitzenmessplatz integriert. Das System erm{\"o}glicht die Charakterisierung und Identifizierung „funktionstauglicher" Sensoren bereits auf Waferebene zwischen den einzelnen Herstellungsschritten, wodurch weitere, bisher {\"u}bliche Verarbeitungsschritte wie das Fixieren, Bonden und Verkapseln f{\"u}r die defekten oder nicht funktionstauglichen Sensorstrukturen entf{\"a}llt. Außerdem bietet eine speziell entworfene miniaturisierte Durchflussmesszelle die M{\"o}glichkeit, bereits auf Waferlevel die Sensitivit{\"a}t, Drift, Hysterese und Ansprechzeit der (bio-)chemischen Sensoren zu charakterisieren. Das System wurde exemplarisch mit kapazitiven, pH-sensitiven EIS- (Elektrolyt-Isolator-Silizium) Strukturen und ISFET- (ionensensitiver Feldeffekttransistor) Strukturen mit verschiedenen Geometrien und Gate-Layouts getestet.},
  language  = {de}
}
@inproceedings{KirchnerSpelthahnSchoeningetal.2010,
  author    = {Kirchner, Patrick and Spelthahn, Heiko and Sch{\"o}ning, Michael Josef and Henkel, Hartmut and Schneider, Andreas and Friedrich, Peter and Kolstad, Jens and Berger, J{\"o}rg},
  title     = {Realisierung eines Polyimid-basierten kalorimetrischen Gassensors zur Inline-{\"U}berwachung der H2O2-Konzentration in aseptischen Abf{\"u}llsystemen},
  series = {Tagungsband: Sensoren und Messsysteme 2010},
  booktitle = {Tagungsband: Sensoren und Messsysteme 2010},
  publisher = {VDE Verlag},
  address   = {Berlin},
  isbn      = {978-3-8007-3260-9},
  pages     = {607 -- 612},
  year      = {2010},
  abstract  = {In aseptischen Abf{\"u}llsystemen wird Wasserstoffperoxid in der Gasphase aufgrund der stark oxidativen Wirkung zur Packstoffentkeimung eingesetzt. Dabei wird die Effizienz der Entkeimung im Wesentlichen von der vorliegenden H2O2-Konzentration im Packstoff bestimmt. Zur Inline-{\"U}berwachung der H2O2-Konzentration wurde ein kalorimetrischer Gassensor auf Basis einer flexiblen Polyimidfolie aus temperatursensitiven D{\"u}nnschicht-Widerst{\"a}nden und Mangan(IV)-oxid als katalytische Transducerschicht realisiert. Der Sensor weist ein lineares Ansprechverhalten mit einer Sensitivit{\"a}t von 7,15 °C/Vol.-\% in einem H2O2-Konzentrationsbereich von 0 bis 8 Vol.-\% auf. Weiterhin wurde zur Auslesung des Sensorsignals eine RFID-Elektronik, bestehend aus einem Sensor-Tag und einer Sende-/Empfangseinheit ausgelegt, sowie eine Abfolge des Messzyklus aufgestellt. Im weiteren Verlauf soll der kalorimetrische Gassensor mit der RFID-Elektronik gekoppelt und in eine Testverpackung zur Inline-{\"U}berwachung der H2O2-Konzentration in aseptischen Abf{\"u}llsystemen implementiert werden.},
  language  = {de}
}
@inproceedings{WernerSpelthahnSchoeningetal.2010,
  author    = {Werner, Frederik and Spelthahn, Heiko and Sch{\"o}ning, Michael Josef and Krumbe, Christoph and Wagner, Torsten and Yoshinobu, Tatsuo and Keusgen, Michael},
  title     = {Neue Ansteuerungselektronik f{\"u}r LAPS-basierte Biosensoren zur gleichzeitig ortsaufgel{\"o}sten Messung der pH-Konzentration},
  series = {Tagungsband: Sensoren und Messsysteme 2010},
  booktitle = {Tagungsband: Sensoren und Messsysteme 2010},
  publisher = {VDE Verlag},
  address   = {Berlin},
  isbn      = {978-3-8007-3260-9},
  pages     = {109 -- 114},
  year      = {2010},
  abstract  = {Ein lichtadressierbarer potentiometrischer Sensor (LAPS) kann die Konzentration eines oder mehrerer Analyten ortsaufgel{\"o}st auf der Sensoroberfl{\"a}che nachweisen. Dazu wird mit einer modulierten Lichtquelle die Halbleiterstruktur des zu untersuchenden Bereiches angeregt und ein entsprechender Photostrom ausgelesen. Durch gleichzeitige Anregung mehrere Bereiche durch Lichtquellen mit unterschiedlichen Modulationsfrequenzen k{\"o}nnen diese auch zeitgleich ausgelesen werden. Mit der neuen, hier vorgestellten Ansteuerungselektronik integriert in einem "Field Programmable Gate Array" (FPGA) ist es m{\"o}glich, mehrere Leuchtquellen gleichzeitig mit unterschiedlichen, w{\"a}hrend der Laufzeit festlegbaren Frequenzen, Phasen und Lichtintensit{\"a}ten zu betreiben. Somit kann das Frequenzverhalten des Sensors untersucht und die Konzentration des Analyten {\"u}ber das Oberfl{\"a}chenpotential mit Hilfe von Strom/Spannungs-Kurven und Phase/Spannungs-Kurven bestimmt werden.},
  language  = {de}
}
@inproceedings{BaeckerPoghossianSchoeningetal.2010,
  author    = {B{\"a}cker, Matthias and Poghossian, Arshak and Sch{\"o}ning, Michael Josef and Schnitzler, Thomas and Biselli, Manfred and Zang, Werner and Wagner, Patrick},
  title     = {Entwicklung eines modularen festk{\"o}rperbasierten Sensorsystems f{\"u}r die {\"U}berwachung von Zellkulturfermentationen},
  series = {Tagungsband: Sensoren und Messsysteme 2010},
  booktitle = {Tagungsband: Sensoren und Messsysteme 2010},
  publisher = {VDE Verlag},
  address   = {Berlin},
  isbn      = {978-3-8007-3260-9},
  pages     = {688 -- 698},
  year      = {2010},
  abstract  = {In diesem Beitrag werden Ergebnisse der Entwicklung eines modularen festk{\"o}rperbasierten Sensorsystems f{\"u}r die {\"U}berwachung von Zellkulturfermentationen pr{\"a}sentiert. Zur Messung der Elektrolytleitf{\"a}higkeit wurde das Layout von Interdigitalelektroden angepasst, um in vergleichsweise gut leitenden Elektrolyten zu messen. Durch Quervernetzung von Glucose-Oxidase mit Glutaraldehyd und Immobilisierung auf einer Platinelektrode wurde ein amperometrischer Glucosesensor mit einem linearen Messbereich von bis zu 2 mM und einer Sensitivit{\"a}t von 168 nA/mM realisiert.},
  language  = {de}
}
@inproceedings{GerhardsBelloumBerretzetal.2010,
  author    = {Gerhards, Michael and Belloum, Adam and Berretz, Frank and Sander, Volker and Skorupa, Sascha},
  title     = {A history-tracing XML-based provenance framework for workflows},
  series = {The 5th Workshop on Workflows in Support of Large-Scale Science},
  booktitle = {The 5th Workshop on Workflows in Support of Large-Scale Science},
  publisher = {IEEE},
  address   = {New York},
  isbn      = {978-1-4244-8989-3},
  doi       = {10.1109/WORKS.2010.5671873},
  pages     = {10 Seiten},
  year      = {2010},
  abstract  = {The importance of validating and reproducing the outcome of computational processes is fundamental to many application domains. Assuring the provenance of workflows will likely become even more important with respect to the incorporation of human tasks to standard workflows by emerging standards such as WS-HumanTask. This paper addresses this trend by an actor-based workflow approach that actively support provenance. It proposes a framework to track and store provenance information automatically that applies for various workflow management systems. In particular, the introduced provenance framework supports the documentation of workflows in a legally binding way. The authors therefore use the concept of layered XML documents, i.e. history-tracing XML. Furthermore, the proposed provenance framework enables the executors (actors) of a particular workflow task to attest their operations and the associated results by integrating digital XML signatures.},
  language  = {en}
}
@inproceedings{BouquegneauKernRousseau2010,
  author    = {Bouquegneau, Christian and Kern, Alexander and Rousseau, Alain},
  title     = {Lightning safety guidelines},
  pages     = {6 Seiten},
  year      = {2010},
  abstract  = {This paper introduces lightning to the layman, noting the right behaviour in front of thunderstorms as well as protective measures against lightning. It also contributes to the prevention of lightning injuries and damages. This report was prepared by the authors inside the AHG1 Group for IEC TC81 (Lightning Protection).},
  language  = {en}
}
@inproceedings{KernFrentzelBehrens2010,
  author    = {Kern, Alexander and Frentzel, Ralf and Behrens, J{\"o}rg},
  title     = {Simulation of the transient voltages in the auxiliary power network of a large power plant in case of a direct lightning strike to the high-voltage overhead transmission line},
  publisher = {IEEE},
  address   = {New York},
  isbn      = {978-88-905519-0-1},
  doi       = {10.1109/ICLP.2010.7845756},
  pages     = {749-1 -- 749-7},
  year      = {2010},
  abstract  = {Large power plants can be endangered by lightning strikes with possible consequences regarding their safety and availability. A special scenario is a lightning strike to the HV overhead transmission line close to the power plant's connection to the power grid. If then additionally a so-called shielding failure of the overhead ground wire on top of the overhead transmission line is assumed, i.e. the lightning strikes directly into a phase conductor, this is an extreme electromagnetic disturbance. The paper deals with the numerical simulation of such a lightning strike and the consequences on the components of the power plant's auxiliary power network connected to different voltage levels.},
  language  = {en}
}
@inproceedings{KernSchelthoffMathieu2010,
  author    = {Kern, Alexander and Schelthoff, Christof and Mathieu, Moritz},
  title     = {Probability of lightning strikes to air-terminations of structures using the electro-geometrical model theory and the statistics of lightning current parameters},
  publisher = {IEEE},
  address   = {New York},
  isbn      = {978-88-905519-0-1},
  doi       = {10.1109/ICLP.2010.7845757},
  pages     = {750-1 -- 750-8},
  year      = {2010},
  abstract  = {Planning the air-terminations for a structure to be protected the use of the rolling-sphere method (electro-geometrical model) is the best way from the physics of lightning point-of-view. Therefore, international standards prefer this method. However, using the rolling-sphere method only results in possible point-of-strikes on a structure without giving information about the probability of strikes at the individual points compared to others.},
  language  = {en}
}
@inproceedings{BerretzSkorupaSanderetal.2010,
  author    = {Berretz, Frank and Skorupa, Sascha and Sander, Volker and Belloum, Adam},
  title     = {Towards an actor-driven workflow management system for grids},
  series = {Proceedings of 2010 International Symposium on Collaborative Technologies and Systems},
  booktitle = {Proceedings of 2010 International Symposium on Collaborative Technologies and Systems},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  isbn      = {978-1-4244-6619-1},
  doi       = {10.1109/CTS.2010.5478458},
  pages     = {611 -- 616},
  year      = {2010},
  abstract  = {Currently, most workflow management systems in Grid environments provide push-oriented job distribution strategies, where jobs are explicitly delegated to resources. In those scenarios the dedicated resources execute submitted jobs according to the request of a workflow engine or Grid wide scheduler. This approach has various limitations, particularly if human interactions should be integrated in workflow execution. To support human interactions with the benefit of enabling inter organizational computation and community approaches, this poster paper proposes the idea of a pull-based task distribution strategy. Here, heterogeneous resources, including human interaction, should actively select tasks for execution from a central repository. This leads to special demands regarding security issues like access control. In the established push-based job execution the resources are responsible for granting access to workflows and job initiators. In general this is done by access control lists, where users are explicitly mapped to local accounts according to their policies. In the pull-based approach the resources actively apply for job executions by sending requests to a central task repository. This means that every resource has to be able to authenticate against the repository to be authorized for task execution. In other words the authorization is relocated from the resources to the repository. The poster paper introduces current work regarding to the mentioned security aspects in the pull-based approach within the scope of the project "HiX4AGWS".},
  language  = {en}
}
@inproceedings{SchollSchubertZieneretal.2010,
  author    = {Scholl, Ingrid and Schubert, Nicole and Ziener, Pascal and Pietrzyk, Uwe},
  title     = {GPU-basiertes Volumenrendering von multimodalen medizinischen Bilddaten in Echtzeit},
  series = {Bildverarbeitung f{\"u}r die Medizin 2010},
  booktitle = {Bildverarbeitung f{\"u}r die Medizin 2010},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-642-11967-5},
  pages     = {400 -- 404},
  year      = {2010},
  abstract  = {Die vorliegende Arbeit zeichnet sich dadurch aus, dass registrierte unsegmentierte Volumina aus multimodalen Bilddatens{\"a}tzen (z.B. MRT, PET) gleichzeitig in einer 3D-Rekonstruktion visualisiert werden und in Echtzeit manipuliert werden k{\"o}nnen. Erm{\"o}glicht wird die Echtzeitf{\"a}higkeit durch die Programmierung der Algorithmen zur direkten Volumenvisualisierung auf der Grafikkarte mittels der neuen CUDA-Technologie. Die Zuordnung der Farbeigenschaften wird {\"u}ber 1D-Transferfunktionen f{\"u}r jedes Volumen getrennt gesteuert. So k{\"o}nnen durch die interaktive Ver{\"a}nderung der 1D-Transferfunktion Detailinformationen aus den zwei Bilddatens{\"a}tzen getrennt kontrolliert werden und die Vorteile der verschiedenen Bildmodalit{\"a}ten in einer Visualisierung genutzt werden. Mittels dieses interaktiven Frameworks k{\"o}nnen neue Erkenntnisse insbesondere {\"u}ber neurodegenerativen Erkrankungen gewonnen werden.},
  language  = {de}
}
@inproceedings{RoethStark2009,
  author    = {R{\"o}th, Thilo and Stark, R.},
  title     = {Die Rolle der virtuellen Produktentstehung bei der Integration von Karosseriesystemen},
  series = {Karosseriekongress Systemintegration in der Karosserietechnik : 17. und 18. M{\"a}rz 2009 in Baden-Baden / Kongressleitung: Reiner Stark},
  booktitle = {Karosseriekongress Systemintegration in der Karosserietechnik : 17. und 18. M{\"a}rz 2009 in Baden-Baden / Kongressleitung: Reiner Stark},
  publisher = {VDI-Wissensforum},
  address   = {D{\"u}sseldorf},
  isbn      = {978-3-9812624-4-5},
  pages     = {175 S. : zahlr. Ill., graph. Darst.},
  year      = {2009},
  language  = {de}
}
@inproceedings{RitzStrauch2010,
  author    = {Ritz, Thomas and Strauch, Jakob},
  title     = {„Offline Strategie"-Patterns f{\"u}r mobile SOA Prozesse},
  series = {Mobile und ubiquit{\"a}re Informationssysteme : Technologien, Anwendungen und Dienste zur Unterst{\"u}tzung von mobiler Kollaboration ; Proceedings zur 5. Konferenz Mobile und Ubiquit{\"a}re Informationssysteme (MMS 2010) ; 23. - 25. Februar 2010 in G{\"o}ttingen, Germany. - (GI-Edition : Proceedings ; 163)},
  booktitle = {Mobile und ubiquit{\"a}re Informationssysteme : Technologien, Anwendungen und Dienste zur Unterst{\"u}tzung von mobiler Kollaboration ; Proceedings zur 5. Konferenz Mobile und Ubiquit{\"a}re Informationssysteme (MMS 2010) ; 23. - 25. Februar 2010 in G{\"o}ttingen, Germany. - (GI-Edition : Proceedings ; 163)},
  editor    = {Bick, Markus},
  publisher = {Gesellschaft f{\"u}r Informatik},
  address   = {Bonn},
  isbn      = {978-3-88579-257-4},
  pages     = {174 -- 180},
  year      = {2010},
  language  = {de}
}
@inproceedings{SchmittSchollCaietal.2010,
  author    = {Schmitt, Robert and Scholl, Ingrid and Cai, Yu and Xia, Ji and Dziwoki, Paul and Harding, Martin and Pavim, Alberto},
  title     = {Machine vision system for inline inspection in carbide insert production},
  series = {Proceedings of the 36th International MATADOR Conference},
  booktitle = {Proceedings of the 36th International MATADOR Conference},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-1-84996-431-9},
  doi       = {10.1007/978-1-84996-432-6_77},
  pages     = {339 -- 342},
  year      = {2010},
  abstract  = {In steps of the production chain of carbide inserts, such as unloading or packaging, the conformity test of the insert type is done manually, which causes a statistic increase of errors due to monotony and fatigue of the worker and the wide variety of the insert types. A machine vision system is introduced that captures digital frames of the inserts in the production line, analyses inspects automatically and measures four quality features: coating colour, edge radius, plate shape and chip-former geometry. This new method has been tested on several inserts of different types and has shown that the prevalent insert types can be inspected and robustly classified in real production environment and therefore improves the manufacturing automation.},
  language  = {en}
}
@inproceedings{Kurz2006,
  author    = {Kurz, Melanie},
  title     = {Recognition of shape in virtual visualizations},
  series = {Proceedings : November 15 - 17, 2006, Technische Universit{\"a}t Darmstadt, Darmstadt, Germany ; PACE, Partners for the advancement of collaborative engineering education},
  booktitle = {Proceedings : November 15 - 17, 2006, Technische Universit{\"a}t Darmstadt, Darmstadt, Germany ; PACE, Partners for the advancement of collaborative engineering education},
  publisher = {Techn. Univ.},
  address   = {Darmstadt},
  isbn      = {978-3-00-020161-5},
  pages     = {203 -- 209},
  year      = {2006},
  language  = {en}
}
@inproceedings{Kurz2008,
  author    = {Kurz, Melanie},
  title     = {Theses on the significance of the model in the form-finding process},
  series = {"Focused" - Current Design Research Projects and Methods : Swiss Design Network Symposium 2008, 30 - 31 May 2008 Mount Gurten, Berne Switzerland},
  booktitle = {"Focused" - Current Design Research Projects and Methods : Swiss Design Network Symposium 2008, 30 - 31 May 2008 Mount Gurten, Berne Switzerland},
  publisher = {SwissDesignNetwork, SDN},
  address   = {Genf},
  isbn      = {978-3-9523138-0-0},
  pages     = {115 -- 127},
  year      = {2008},
  language  = {en}
}
@inproceedings{Kurz2008,
  author    = {Kurz, Melanie},
  title     = {On the benefit of moving images for the evaluation of form in virtual space : reflections in model theory},
  series = {Design and semantics of form and movement : DeSForM 2008 ; [Hochschule f{\"u}r Gestaltung Offenbach am Main, 6.-7.11.2008]},
  booktitle = {Design and semantics of form and movement : DeSForM 2008 ; [Hochschule f{\"u}r Gestaltung Offenbach am Main, 6.-7.11.2008]},
  editor    = {Feijs, Loe},
  publisher = {Philips},
  address   = {Eindhoven},
  isbn      = {978-90-809801-2-9},
  pages     = {31 -- 34},
  year      = {2008},
  language  = {en}
}
@inproceedings{PhamVuTranetal.2010,
  author    = {Pham, Phu Tinh and Vu, Khoi Duc and Tran, Thanh Ngoc and Staat, Manfred},
  title     = {A primal-dual algorithm for shakedown analysis of elastic-plastic bounded linearly kinematic hardening bodies},
  year      = {2010},
  language  = {en}
}
@inproceedings{NguyenRaatschenStaat2010,
  author    = {Nguyen, N.-H. and Raatschen, Hans-J{\"u}rgen and Staat, Manfred},
  title     = {A hyperelastic model of biological tissue materials in tubular organs},
  year      = {2010},
  language  = {en}
}
@inproceedings{TranStaat2010,
  author    = {Tran, Thanh Ngoc and Staat, Manfred},
  title     = {Shakedown analysis of two dimensional structures by an edge-based smoothed finite element method},
  year      = {2010},
  language  = {en}
}
@inproceedings{RitzFuchs2008,
  author    = {Ritz, Thomas and Fuchs, Britta},
  title     = {Kosten-Nutzen-Bewertungen bei mobilen Anwendungen},
  series = {Mobile und Ubiquit{\"a}re Informationssysteme - Technologien, Prozesse, Marktfahigkeit. Proceedings zur 3. Konferenz Mobile und Ubiquit{\"a}re Informationssysteme (MMS 2008) 26. - 28. Februar 2008, M{\"u}nchen, Germany. - (GI-Edition : Proceedings ; 123) Breitner, Michael H. [Hrsg.]},
  booktitle = {Mobile und Ubiquit{\"a}re Informationssysteme - Technologien, Prozesse, Marktfahigkeit. Proceedings zur 3. Konferenz Mobile und Ubiquit{\"a}re Informationssysteme (MMS 2008) 26. - 28. Februar 2008, M{\"u}nchen, Germany. - (GI-Edition : Proceedings ; 123) Breitner, Michael H. [Hrsg.]},
  editor    = {Breitner, Michael},
  publisher = {Ges. f{\"u}r Informatik},
  address   = {Bonn},
  isbn      = {978-3-88579-217-8},
  pages     = {164 -- 177},
  year      = {2008},
  language  = {de}
}
@inproceedings{Mertens2001,
  author    = {Mertens, Josef},
  title     = {Next steps envisaged to improve wing performance of commercial aircraft},
  series = {Aerodynamic drag reduction technologies : proceedings of the CEAS/DragNet European Drag Reduction Conference, 19-21 June 2000, Potsdam, Germany. - (Notes on numerical fluid mechanics ; 76)},
  booktitle = {Aerodynamic drag reduction technologies : proceedings of the CEAS/DragNet European Drag Reduction Conference, 19-21 June 2000, Potsdam, Germany. - (Notes on numerical fluid mechanics ; 76)},
  publisher = {Springer},
  address   = {Berlin [u.a.]},
  isbn      = {3-540-41911-X (Print)},
  doi       = {10.1007/978-3-540-45359-8_26},
  pages     = {246 -- 255},
  year      = {2001},
  language  = {en}
}
@inproceedings{DammRitzStrauch2011,
  author    = {Damm, Sebastian and Ritz, Thomas and Strauch, Jakob},
  title     = {Muster und Cloud Computing als Plattformstrategie f{\"u}r mobile Unternehmenssoftware},
  series = {Mobile und ubiquit{\"a}re Informationssysteme : MMS 2011 ; proceedings der 6. Konferenz, 28. Februar 2011 in Kaiserslautern, Deutschland. - (GI-Edition lecture notes in informatics ; 185)},
  booktitle = {Mobile und ubiquit{\"a}re Informationssysteme : MMS 2011 ; proceedings der 6. Konferenz, 28. Februar 2011 in Kaiserslautern, Deutschland. - (GI-Edition lecture notes in informatics ; 185)},
  editor    = {H{\"o}pfner, Hagen},
  publisher = {Ges. f{\"u}r Informatik},
  address   = {Bonn},
  isbn      = {978-3-88579-279-6},
  pages     = {91 -- 104},
  year      = {2011},
  language  = {de}
}
@inproceedings{Pawelke1975,
  author    = {Pawelke, Siegfried},
  title     = {Approximationstheorie mit Hilfe von Jacobi-Polynomen und Kugelfunktionen},
  series = {Proceedings of the conference jointly organized by the Mathematical Institute of the Polish Academy of Sciences and the Institute of Mathematics of the Adam Mickiewicz University, held in Poznan, 22-26 August, 1972},
  booktitle = {Proceedings of the conference jointly organized by the Mathematical Institute of the Polish Academy of Sciences and the Institute of Mathematics of the Adam Mickiewicz University, held in Poznan, 22-26 August, 1972},
  editor    = {Ciesielski, Zbigniew},
  publisher = {Reichel},
  address   = {Dordrecht},
  isbn      = {90-277-0483-X},
  pages     = {157 -- 173},
  year      = {1975},
  language  = {de}
}
@inproceedings{Ritz2007,
  author    = {Ritz, Thomas},
  title     = {Die benutzerzentrierte Entwicklung mobiler Unternehmenssoftware},
  series = {MMS 2007: Mobilit{\"a}t und mobile Informationssysteme : 2nd conference of GI-Fachgruppe MMS ; March 6th, 2007 in Aachen, Germany},
  booktitle = {MMS 2007: Mobilit{\"a}t und mobile Informationssysteme : 2nd conference of GI-Fachgruppe MMS ; March 6th, 2007 in Aachen, Germany},
  editor    = {K{\"o}nig-Ries, Brigitta},
  publisher = {Ges. f{\"u}r Informatik},
  address   = {Bonn},
  isbn      = {978-3-88579-198-0},
  pages     = {23 -- 35},
  year      = {2007},
  language  = {de}
}
@inproceedings{Hirschberg2010,
  author    = {Hirschberg, Rainer},
  title     = {Energetische Bewertung raumlufttechnischer Anlagen. Vereinfachtes Verfahren nach DIN V 18599},
  series = {Deutsche K{\"a}lte-Klima-Tagung 2010 Magdeburg},
  booktitle = {Deutsche K{\"a}lte-Klima-Tagung 2010 Magdeburg},
  publisher = {DKV},
  address   = {Hannover},
  isbn      = {978-3-932715-46-4},
  pages     = {26 Seiten},
  year      = {2010},
  abstract  = {Unter Energieeffizienz wird verstanden, dass ein definiertes Ziel mit m{\"o}glichst wenig Energie erreicht wird. Im Beitrag wird zun{\"a}chst eine Formel zur Berechnung der Gesamtenergieeffizienz eines Geb{\"a}udes angegeben. Darauf aufbauend wird ein 3-S{\"a}ulen-Modell zur Energieeinsparung vorgeschlagen. Es beinhaltet vereinfachte Verfahren zur Berechnung der Betriebseigenschaften von Heizanlagen, raumlufttechnischen Anlagen und K{\"u}hl- und Kaltwasseranlagen. Am Beispiel einer RLT-Anlage wird die Vorgehensweise der Bewertung n{\"a}her erl{\"a}utert. Zusammenfassend wird festgestellt, dass das vereinfachte Verfahren eine schnelle und sichere energetische Bewertung der genannten Anlagen erlaubt,, zu Pr{\"a}senzwissen f{\"u}hrt, die Haupteinflussgr{\"o}ßen aufzeigt und eine Anlagenbewertung ohne Geb{\"a}udebewertung gew{\"a}hrleistet. Das vereinfachte Verfahren wird im Fr{\"u}hjahr 2011 verf{\"u}gbar sein. Es soll Bestandteil der DIN V 18599 werden, und die EnEV 2012 soll darauf Bezug nehmen.},
  language  = {de}
}
@inproceedings{HardtAbdelGawadMartinetal.1975,
  author    = {Hardt, Arno and Abdel-Gawad, A and Martin, Siegfried A. and Reich, J.},
  title     = {Design procedures for the Juelich QQDDQ high resolution spectrometer},
  series = {Proceedings, 5th International Conference on Magnet Technology (MT-5) : Rome, Italy, April 21-25, 1975},
  booktitle = {Proceedings, 5th International Conference on Magnet Technology (MT-5) : Rome, Italy, April 21-25, 1975},
  pages     = {45 -- 51},
  year      = {1975},
  language  = {en}
}
@inproceedings{MuellerVeggianDehnhardtMerdingeretal.1973,
  author    = {M{\"u}ller-Veggian, Mattea and Dehnhardt, W. and Merdinger, I. G. and Mills, S. J.},
  title     = {High-spin yrast states in transitional nuclei ¹³²,¹³⁴ Ce},
  series = {Proceedings of the International Conference on Nuclear Physics : Munich, August 27 - September 1, 1973},
  booktitle = {Proceedings of the International Conference on Nuclear Physics : Munich, August 27 - September 1, 1973},
  publisher = {North Holland Pub.},
  address   = {Amsterdam},
  isbn      = {0-7204-0280-8},
  pages     = {180},
  year      = {1973},
  language  = {en}
}
@inproceedings{MuellerVeggianBochevLiederetal.1981,
  author    = {M{\"u}ller-Veggian, Mattea and Bochev, B. and Lieder, R. M. and Didelez, J. P.},
  title     = {Measuremenmt of particle spectra of α induced non-equilibrium reactions for ²⁰⁶⁻²¹² Po},
  series = {Proceedings of the International Conference on Nuclear Physics. 1980,1 (1981)},
  booktitle = {Proceedings of the International Conference on Nuclear Physics. 1980,1 (1981)},
  pages     = {452},
  year      = {1981},
  language  = {en}
}
@inproceedings{PetersZiemonsDammersetal.2001,
  author    = {Peters, H. and Ziemons, Karl and Dammers, J. and M{\"u}ller-Veggian, Mattea},
  title     = {Continuous head motion detection during MEG measurement using head location coils},
  series = {Proceedings of the 12th International Conference on Biomagnetism : August 13 - 17, 2000, Helsinki University of Technology, Espoo, Finland},
  booktitle = {Proceedings of the 12th International Conference on Biomagnetism : August 13 - 17, 2000, Helsinki University of Technology, Espoo, Finland},
  editor    = {Nenonen, Jukka},
  publisher = {Helsinki Univ. of Technology, Laboratory of Biomedical Engineering},
  address   = {Espoo},
  isbn      = {951-22-5401-8},
  pages     = {XX, 1060 S. : Ill., graph. Darst.},
  year      = {2001},
  language  = {en}
}
@inproceedings{MuellerVeggianHaenniBeuscheretal.1980,
  author    = {M{\"u}ller-Veggian, Mattea and Haenni, D. R. and Beuscher, H. and Lieder, R. M.},
  title     = {Weak coupling of a neutron hole to a ¹⁴⁶ Gd core ; an in-beam study of ¹⁴⁵ Gd},
  series = {Structure of medium-heavy nuclei, 1979 : proceedings of the 6. European Physical Soc. Nuclear Divisional Conference on the Structure of Medium-Heavy Nuclei held in Rhodes, Greece, 1-4 May 1979 / ed. Committee: G. S. Anagnostatos ... - (Conference series / Institute of Physics London, Bristol ; 49)},
  booktitle = {Structure of medium-heavy nuclei, 1979 : proceedings of the 6. European Physical Soc. Nuclear Divisional Conference on the Structure of Medium-Heavy Nuclei held in Rhodes, Greece, 1-4 May 1979 / ed. Committee: G. S. Anagnostatos ... - (Conference series / Institute of Physics London, Bristol ; 49)},
  publisher = {Inst. of Physics},
  address   = {Bristol},
  isbn      = {0-85498-140-3},
  pages     = {133},
  year      = {1980},
  language  = {en}
}
@inproceedings{MuellerVeggianNeskakisLiederetal.1978,
  author    = {M{\"u}ller-Veggian, Mattea and Neskakis, A. and Lieder, R. M. and Beuscher, H.},
  title     = {Study of rotational aligned bands in ¹⁹⁰,¹⁹²,¹⁹⁴ Au},
  series = {Nuclear interactions : International Conference on Nuclear Interactions held in Canberra, 28 Aug. - 1 Sept. 1978 / ed. by Brian Albert Robson. - (Lecture notes in physics ; 92)},
  booktitle = {Nuclear interactions : International Conference on Nuclear Interactions held in Canberra, 28 Aug. - 1 Sept. 1978 / ed. by Brian Albert Robson. - (Lecture notes in physics ; 92)},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-540-09102-8},
  pages     = {428},
  year      = {1978},
  language  = {en}
}
@inproceedings{MuellerVeggianDehnhardtMills1975,
  author    = {M{\"u}ller-Veggian, Mattea and Dehnhardt, W. and Mills, J. S.},
  title     = {Levels in the closed neutron shell nucleus ¹⁴² Nd},
  series = {International Symposium on Highly Excited States in Nuclei held at J{\"u}lich from 23-26 September 1975 : proceedings; Vol. 1 Contributed papers},
  booktitle = {International Symposium on Highly Excited States in Nuclei held at J{\"u}lich from 23-26 September 1975 : proceedings; Vol. 1 Contributed papers},
  publisher = {Verlag des Forschungszentrums J{\"u}lich},
  address   = {J{\"u}lich},
  pages     = {51},
  year      = {1975},
  language  = {en}
}
@inproceedings{GroebelWernerJoerresetal.2011,
  author    = {Groebel, Simone and Werner, Frederik and J{\"o}rres, Niklas and Jansen, F. and Kasper, Katharina and Schiffels, Johannes and Sprenger, B. and Baumann, Marcus and Sch{\"o}ning, Michael Josef and Selmer, Thorsten},
  title     = {Entwicklung einer Sensor-{\"U}berwachung f{\"u}r Biogasanlagen auf Basis von Prozessdaten einer Parallelanlage},
  series = {10. Dresdner Sensor-Symposium : Dresden, 5. - 7. Dezember 2011 ; miniaturisierte analytische Verfahren, Hochtemperatur-Sensoren, Sensoren f{\"u}r Bioprozess- und Verfahrenstechnik, Sensoren f{\"u}r die Medizin, Chemische Verfahrenstechnik, Lebensmittelanalytik, innovative Sensorl{\"o}sungen, Sensoren f{\"u}r die Wasserqualit{\"a}t, Selbst{\"u}berwachung / Gerald Gerlach ... (Hg.)},
  booktitle = {10. Dresdner Sensor-Symposium : Dresden, 5. - 7. Dezember 2011 ; miniaturisierte analytische Verfahren, Hochtemperatur-Sensoren, Sensoren f{\"u}r Bioprozess- und Verfahrenstechnik, Sensoren f{\"u}r die Medizin, Chemische Verfahrenstechnik, Lebensmittelanalytik, innovative Sensorl{\"o}sungen, Sensoren f{\"u}r die Wasserqualit{\"a}t, Selbst{\"u}berwachung / Gerald Gerlach ... (Hg.)},
  publisher = {TUDpress},
  address   = {Dresden},
  isbn      = {978-3-942710-53-4},
  doi       = {10.5162/10dss2011/4.3},
  pages     = {81 -- 84},
  year      = {2011},
  abstract  = {Beim Ausbau nachhaltiger, regenerativer Energieversorgung hat die Umwandlung von organischer Biomasse in Biogas ein großes Potential. Der zugrundeliegende, komplexe biologische Prozess wird noch immer unzureichend verstanden und bedarf systematischer Untersuchungen der Prozessparameter, um einen hohen Ertrag bei guter Gasqualit{\"a}t zu erm{\"o}glichen. Die Fragestellungen zur Entschl{\"u}sselung des Prozesses sind sowohl verfahrenstechnischer als auch mikrobiologischer Natur. Aus mikrobiologischer Sicht ist die Kenntnis der tats{\"a}chlich beteiligten prozesstragenden Mikroorganismen von erheblicher Bedeutung, aus verfahrenstechnischer Sicht die Kenntnis der physikalischen und chemischen Faktoren, welche die mikrobiologischen Prozesse und kontrollieren. Im Zusammenspiel aller dieser Parameter wird die Biogasbildung bef{\"o}rdert oder behindert, bis zum Abbruch des Prozesses. Eine m{\"o}gliche Kontrollmethode ist die Messung der metabolischen Aktivit{\"a}t prozesstragender Organismen. Diese soll, beruhend auf fundierten Prozessdaten, gewonnen durch eine Parallelanlage, mit einem lichtadressierbaren potentiometrischen Sensor-System (LAPS) realisiert werden. Dieser Sensor ist in der Lage, pH-Wert-{\"a}nderungen zu detektieren, die durch den Stoffwechsel der auf dem Chip immobilisierten Organismen hervorgerufen werden, um eine Online-{\"U}berwachung von Biogasanlagen zu erm{\"o}glichen.},
  language  = {de}
}
@inproceedings{BurgazziFioriniDeMagistrisetal.1998,
  author    = {Burgazzi, Luciano and Fiorini, Gian Luigi and De Magistris, F. and Lensa, Werner von and Staat, Manfred and Atles, J.},
  title     = {Reliability Assessment of Passive Safety Systems},
  series = {Proceedings of the 6th International Conference on Nuclear Engineering : ICONE : May 10 - 14, 1998, San Diego, Calif.},
  booktitle = {Proceedings of the 6th International Conference on Nuclear Engineering : ICONE : May 10 - 14, 1998, San Diego, Calif.},
  publisher = {American Society of Mechanical Engineers},
  address   = {New York},
  year      = {1998},
  language  = {en}
}
@inproceedings{Ritz2001,
  author    = {Ritz, Thomas},
  title     = {Produktion von kundenindividuellen Informationsdienstleistungen},
  series = {Workshop Internetbasierte Vertriebsunterst{\"u}tzung in der Praxis : 26. April 2001, Institutszentrum Stuttgart der Fraunhofer-Gesellschaft (IZS) / Fraunhofer Institut Arbeitswirtschaft und Organisation},
  booktitle = {Workshop Internetbasierte Vertriebsunterst{\"u}tzung in der Praxis : 26. April 2001, Institutszentrum Stuttgart der Fraunhofer-Gesellschaft (IZS) / Fraunhofer Institut Arbeitswirtschaft und Organisation},
  editor    = {Zabel, Armin},
  publisher = {Fraunhofer IAO},
  address   = {Stuttgart},
  pages     = {4 S.},
  year      = {2001},
  language  = {de}
}
@inproceedings{Ritz2001,
  author    = {Ritz, Thomas},
  title     = {DISMED - an innovation portal for printing and media industry},
  series = {CRIS 2000 : the fifth conference on Current Research Information Systems in Europe, in Helsinki (Finland), 25-27 May 2000},
  booktitle = {CRIS 2000 : the fifth conference on Current Research Information Systems in Europe, in Helsinki (Finland), 25-27 May 2000},
  publisher = {CORDIS Archive},
  address   = {[s.l.]},
  pages     = {9 S. : graph. Darst.},
  year      = {2001},
  language  = {en}
}
@inproceedings{Ritz2001,
  author    = {Ritz, Thomas},
  title     = {Personalized information services : an electronic information commodity and its production},
  series = {Electronic publishing '01 : 2001 in the digital publishing odyssey ; proceedings of an ICCC/IFIP conference held at the University of Kent at Canterbury, Kent, United Kingdom, 5 - 7 July, 2001 ; [proceedings of the Fifth Conference on Electronic Publishing]},
  booktitle = {Electronic publishing '01 : 2001 in the digital publishing odyssey ; proceedings of an ICCC/IFIP conference held at the University of Kent at Canterbury, Kent, United Kingdom, 5 - 7 July, 2001 ; [proceedings of the Fifth Conference on Electronic Publishing]},
  publisher = {IOS Press [u.a.]},
  address   = {Amsterdam},
  isbn      = {1-58603-191-0},
  pages     = {48 -- 58},
  year      = {2001},
  language  = {en}
}
@inproceedings{RitzStender2003,
  author    = {Ritz, Thomas and Stender, Michael},
  title     = {Modellierung von Business-to-Business Gesch{\"a}ftsprozessen im Mobile Commerce},
  series = {Mobile Commerce - Anwendung und Perspektiven : [proceedings zum] 3. Workshop Mobile Commerce, Universit{\"a}t Augsburg, 04.02.2003. - (GI-Edition : Proceedings ; 25)},
  booktitle = {Mobile Commerce - Anwendung und Perspektiven : [proceedings zum] 3. Workshop Mobile Commerce, Universit{\"a}t Augsburg, 04.02.2003. - (GI-Edition : Proceedings ; 25)},
  editor    = {Pousttchi, Key},
  publisher = {Ges. f{\"u}r Informatik},
  address   = {Bonn},
  isbn      = {3-88579-354-7},
  pages     = {27 -- 41},
  year      = {2003},
  language  = {de}
}