@incollection{MeskourisHoltschoppenButenwegetal.2010,
  author    = {Meskouris, Konstantin and Holtschoppen, Britta and Butenweg, Christoph and Park, Jin},
  title     = {Seismische Auslegung von Silo- und Tankbauwerken},
  series = {Festschrift zum 60. Geburtstag von Univ.-Prof. Dr.-Ing. Ingbert Mangerig. (Berichte aus dem konstruktiven Ingenieurbau ; 2010,6)},
  booktitle = {Festschrift zum 60. Geburtstag von Univ.-Prof. Dr.-Ing. Ingbert Mangerig. (Berichte aus dem konstruktiven Ingenieurbau ; 2010,6)},
  publisher = {Univ. der Bundeswehr},
  address   = {Neubiberg},
  pages     = {215 -- 224},
  year      = {2010},
  language  = {de}
}
@article{MiyamotoKanekoMatsuoetal.2010,
  author    = {Miyamoto, Ko-ichiro and Kaneko, Kazumi and Matsuo, Akira and Wagner, Torsten and Kanoh, Shin`ichiro and Sch{\"o}ning, Michael Josef and Yoshinobu, Tatsuo},
  title     = {Miniaturized chemical imaging sensor system using an OLED display panel},
  series = {Procedia Engineering},
  volume    = {5},
  journal   = {Procedia Engineering},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1877-7058},
  doi       = {10.1016/j.proeng.2010.09.160},
  pages     = {516 -- 519},
  year      = {2010},
  abstract  = {The chemical imaging sensor is a semiconductor-based chemical sensor that can visualize the two-dimensional distribution of specific ions or molecules in the solution. In this study, we developed a miniaturized chemical imaging sensor system with an OLED display panel as a light source that scans the sensor plate. In the proposed configuration, the display panel is placed directly below the sensor plate and illuminates the back surface. The measured area defined by illumination can be arbitrarily customized to fit the size and the shape of the sample to be measured. The waveform of the generated photocurrent, the currentvoltage characteristics and the pH sensitivity were investigated and pH imaging with this miniaturized system was demonstrated.},
  language  = {en}
}
@article{MiyamotoSugawaraKanohetal.2010,
  author    = {Miyamoto, Ko-ichiro and Sugawara, Yuri and Kanoh, Shin´ichiro and Yoshinobu, Tatsuo and Wagner, Torsten and Sch{\"o}ning, Michael Josef},
  title     = {Image correction method for the chemical imaging sensor},
  series = {Sensors and Actuators B: Chemical},
  volume    = {144},
  journal   = {Sensors and Actuators B: Chemical},
  number    = {2},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0925-4005},
  doi       = {10.1016/j.snb.2008.10.069},
  pages     = {344 -- 348},
  year      = {2010},
  abstract  = {The chemical imaging sensor is a semiconductor-based chemical sensor that can visualize the spatial distribution of chemical species. For the practical application of this sensor, artifacts in the chemical images due to defects of the semiconductor substrate and contamination of the sensing surface etc. have been a major problem. An image correction method was developed to eliminate the influence of nonuniformity of individual sensor plate.},
  language  = {en}
}
@article{MottaghyPechnigTaugsetal.2010,
  author    = {Mottaghy, Darius and Pechnig, Renate and Taugs, Renate and Kr{\"o}ger, Jens and Thomsen, Claudia and Hesse, Fabian and Liebsch-Doerschner, Thomas},
  title     = {Erstellung eines geothermischen Modells f{\"u}r Teile Hamburgs und anliegende Gebiete},
  series = {BBR - Fachmagazin f{\"u}r Brunnen- und Leitungsbau},
  volume    = {61},
  journal   = {BBR - Fachmagazin f{\"u}r Brunnen- und Leitungsbau},
  number    = {12},
  publisher = {WVGW Wirtschafts- u. Verl.Ges. Gas und Wasser},
  address   = {Bonn},
  issn      = {1611-1478},
  pages     = {52 -- 59},
  year      = {2010},
  language  = {de}
}
@incollection{MufflerTippkoetterUlber2010,
  author    = {Muffler, Kai and Tippk{\"o}tter, Nils and Ulber, Roland},
  title     = {Chemical feedstocks and fine chemicals from other substrates},
  series = {Handbook of hydrocarbon and lipid microbiology. Volume 4: Consequences of microbial interactions with hydrocarbons, oils and lipids. - (Springer reference)},
  booktitle = {Handbook of hydrocarbon and lipid microbiology. Volume 4: Consequences of microbial interactions with hydrocarbons, oils and lipids. - (Springer reference)},
  editor    = {Timmis, Kenneth N.},
  publisher = {Springer},
  address   = {Berlin [u.a.]},
  isbn      = {978-3-540-77588-1},
  doi       = {10.1007\%2F978-3-540-77587-4_214},
  pages     = {2891 -- 2902},
  year      = {2010},
  language  = {en}
}
@article{MukherjeePrahlBlecketal.2010,
  author    = {Mukherjee, Krishnendu and Prahl, Ulrich and Bleck, Wolfgang and Reisgen, Uwe and Schleser, Markus and Abdurakhmanov, Aydemir},
  title     = {Characterization and modelling techniques for gas metal arc welding of DP 600 sheet steels},
  series = {Materialwissenschaft und Werkstofftechnik},
  volume    = {41},
  journal   = {Materialwissenschaft und Werkstofftechnik},
  number    = {11},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1521-4052},
  doi       = {10.1002/mawe.201000692},
  pages     = {972 -- 983},
  year      = {2010},
  abstract  = {The objectives of the present work are to characterize the Gas Metal Arc Welding process of DP 600 sheet steel and to summarize the modelling techniques. The time-temperature evolution during the welding cycle was measured experimentally and modelled with the softwaretool SimWeld. To model the phase transformations during the welding cycle dilatometer tests were done to quantify the parameters for phase field modelling by MICRESS®. The important input parameters are interface mobility, nucleation density, etc. A contribution was made to include austenite to bainite transformation in MICRESS®. This is useful to predict the microstructure in the fast cooling segments. The phase transformation model is capable to predict the microstructure along the heating and cooling cycles of welding. Tensile tests have shown the evidence of failure at the heat affected zone, which has the ferrite-tempered martensite microstructure.},
  language  = {en}
}
@book{Mueller2010,
  author    = {M{\"u}ller, Karsten},
  title     = {Bedarfsorientierte Instandhaltung von Kanalisationen},
  publisher = {IRB Verl.},
  address   = {Stuttgart},
  isbn      = {978-3-8167-8060-1},
  pages     = {123 S. : Ill., graph. Darst., Kt.},
  year      = {2010},
  language  = {de}
}
@article{NabilPetersonSchmidtetal.2010,
  author    = {Nabil, F. and Peterson, Leif Arne and Schmidt, A. and Geerdes, D.},
  title     = {Die Holzkuppel des Neuen Palais in Potsdam},
  series = {Bauingenieur},
  volume    = {85},
  journal   = {Bauingenieur},
  number    = {8},
  publisher = {Springer-VDI-Verlag},
  address   = {D{\"u}sseldorf},
  issn      = {0005-6650},
  pages     = {324 -- 330},
  year      = {2010},
  language  = {de}
}
@article{NamAroraBehbahanietal.2010,
  author    = {Nam, J. and Arora, D. and Behbahani, Mehdi and Probst, M. and Benkowski, R. and Behr, Marek and Pasquali, M.},
  title     = {New computational method in hemolysis analysis for artificial heart pump},
  year      = {2010},
  language  = {en}
}
@article{Naujokat2010,
  author    = {Naujokat, Anke},
  title     = {Ut rhetorica architectura - Leon Battista Alberti´s Technique of Architectural Collage / Leon Battista Albertis architektonische Collagetechnik},
  series = {Candide : journal for architectural knowledge},
  volume    = {2},
  journal   = {Candide : journal for architectural knowledge},
  publisher = {RWTH Aachen},
  address   = {Aachen},
  issn      = {1869-6465},
  pages     = {73 -- 100},
  year      = {2010},
  abstract  = {Leon Battista Alberti, probably the most innovative architect of early Renaissance Italy, has always fascinated scholars by virtue of the striking interpenetration of theory and practice manifest in his work. As an architect, Alberti was an autodidact. Without the benefit of the formative influence of a master or design education, the roots of his conception of architecture lie in his intellectual formation through humanistic rhetoric. The present study demonstrates with reference to a specific project — the Tempietto of the Holy Sepulchre in Florence — how Alberti's humanist approach conditioned his method of architectural design.},
  language  = {en}
}
@inproceedings{NguyenRaatschenStaat2010,
  author    = {Nguyen, N.-H. and Raatschen, Hans-J{\"u}rgen and Staat, Manfred},
  title     = {A hyperelastic model of biological tissue materials in tubular organs},
  year      = {2010},
  language  = {en}
}
@inproceedings{NiemuellerFerreinBecketal.2010,
  author    = {Niem{\"u}ller, Tim and Ferrein, Alexander and Beck, Daniel and Lakemeyer, Gerhard},
  title     = {Design principles of the component-based robot software framework Fawkes},
  series = {Simulation, Modeling, and Programming for Autonomous Robots},
  booktitle = {Simulation, Modeling, and Programming for Autonomous Robots},
  publisher = {Springer},
  address   = {Berlin},
  doi       = {10.1007/978-3-642-17319-6_29},
  pages     = {300 -- 311},
  year      = {2010},
  abstract  = {The idea of component-based software engineering was proposed more that 40 years ago, yet only few robotics software frameworks follow these ideas. The main problem with robotics software usually is that it runs on a particular platform and transferring source code to another platform is crucial. In this paper, we present our software framework Fawkes which follows the component-based software design paradigm by featuring a clear component concept with well-defined communication interfaces. We deployed Fawkes on several different robot platforms ranging from service robots to biped soccer robots. Following the component concept with clearly defined communication interfaces shows great benefit when porting robot software from one robot to the other. Fawkes comes with a number of useful plugins for tasks like timing, logging, data visualization, software configuration, and even high-level decision making. These make it particularly easy to create and to debug productive code, shortening the typical development cycle for robot software.},
  language  = {en}
}
@inproceedings{NiemuellerFerreinLakemeyer2010,
  author    = {Niem{\"u}ller, Tim and Ferrein, Alexander and Lakemeyer, Gerhard},
  title     = {A Lua-based behavior engine for controlling the humanoid robot Nao},
  series = {RoboCup 2009: Robot Soccer World Cup XIII},
  booktitle = {RoboCup 2009: Robot Soccer World Cup XIII},
  publisher = {Springer},
  address   = {Berlin},
  doi       = {10.1007/978-3-642-11876-0_21},
  pages     = {240 -- 251},
  year      = {2010},
  abstract  = {The high-level decision making process of an autonomous robot can be seen as an hierarchically organised entity, where strategical decisions are made on the topmost layer, while the bottom layer serves as driver for the hardware. In between is a layer with monitoring and reporting functionality. In this paper we propose a behaviour engine for this middle layer which, based on formalism of hybrid state machines (HSMs), bridges the gap between high-level strategic decision making and low-level actuator control. The behaviour engine has to execute and monitor behaviours and reports status information back to the higher level. To be able to call the behaviours or skills hierarchically, we extend the model of HSMs with dependencies and sub-skills. These Skill-HSMs are implemented in the lightweight but expressive Lua scripting language which is well-suited to implement the behaviour engine on our target platform, the humanoid robot Nao.},
  language  = {en}
}
@misc{O'ConnellSiegertEversetal.2010,
  author    = {O'Connell, Timothy and Siegert, Petra and Evers, Stefan and Bongaerts, Johannes and Weber, Thomas and Maurer, Karl-Heinz and Bessler, Cornelius},
  title     = {Wasch- oder Reinigungsmittel mit gesteigerter Waschkraft [Offenlegungsschrift]},
  publisher = {Deutsches Patentamt},
  address   = {M{\"u}nchen},
  pages     = {1 -- 34},
  year      = {2010},
  language  = {de}
}
@misc{O'ConnellSiegertMaureretal.2010,
  author    = {O'Connell, Timothy and Siegert, Petra and Maurer, Karl-Heinz and Schiedel, Marc-Steffen and Vockenroth, Inga Kerstin},
  title     = {Method for improving the cleaning action of a detergent or cleaning agent [Internationale Patentanmeldung]},
  publisher = {WIPO},
  address   = {Genf},
  pages     = {1 -- 15},
  year      = {2010},
  language  = {en}
}
@article{Olbertz2010,
  author    = {Olbertz, Klaus},
  title     = {Kurzarbeit und betriebsbedingte K{\"u}ndigungen - Wissenswertes f{\"u}r die betriebliche Praxis},
  series = {NWB - Steuer- und Wirtschaftsrecht},
  journal   = {NWB - Steuer- und Wirtschaftsrecht},
  number    = {37},
  publisher = {NWB-Verlag},
  address   = {Herne},
  issn      = {1860-9449},
  pages     = {2966 -- 2972},
  year      = {2010},
  abstract  = {Kurzarbeit war und ist eines der wesentlichen Elemente der Unternehmen, um dem durch die Finanz- und Wirtschaftskrise begr{\"u}ndeten Arbeitskr{\"a}fte{\"u}berhang begegnen zu k{\"o}nnen. Laut statistischer Mitteilung der Bundesagentur f{\"u}r Arbeit waren im Mai 2009 ca. 1,52 Mio. Arbeitnehmer in Kurzarbeit, im M{\"a}rz 2010 waren es immer noch 830.000 Arbeitnehmer, die Kurzarbeitergeld bezogen haben. Bis Ende 2010 k{\"o}nnen Arbeitgeber Kurzarbeit noch f{\"u}r die verl{\"a}ngerte H{\"o}chstbezugsdauer von bis zu 18 Monaten beantragen. Zudem hat der Bundestag am 8.7.2010 eine nochmalige Verl{\"a}ngerung der Erstattung der Sozialversicherungsbeitr{\"a}ge bis M{\"a}rz 2012 verabschiedet. Trotzdem m{\"u}ssen zahlreiche Arbeitgeber inzwischen feststellen, dass sie allein mit dem Mittel der Kurzarbeit nicht um einen Personalabbau herumkommen. Dies gilt insbesondere f{\"u}r diejenigen Unternehmen, die gleich zu Beginn der Krise im Herbst 2008 Kurzarbeit eingef{\"u}hrt haben und bei denen deshalb die damals noch geltende 24-monatige H{\"o}chstbezugsdauer im Herbst 2010 auslaufen wird},
  language  = {de}
}
@article{OlbertzKleinertz2010,
  author    = {Olbertz, Klaus and Kleinertz, Caroline},
  title     = {Urlaub, Feiertage und Krankheit - Kurzarbeit in Vollzug},
  series = {Arbeit und Arbeitsrecht : AuA},
  journal   = {Arbeit und Arbeitsrecht : AuA},
  number    = {6},
  publisher = {Huss Medien},
  address   = {Berlin},
  issn      = {0323-4568},
  pages     = {348 -- 351},
  year      = {2010},
  language  = {de}
}
@article{OlbertzThiergart2010,
  author    = {Olbertz, Klaus and Thiergart, Kirsten},
  title     = {B{\"o}rsengang leicht gemacht? Gesellschafts- und arbeitsrechtliche Aspekte bei {\"U}bernahme und Verschmelzung eines Zielunternehmens auf die SPAC in der Rechtsform der SE},
  series = {Betriebs-Berater: BB ; Recht, Wirtschaft, Steuern},
  journal   = {Betriebs-Berater: BB ; Recht, Wirtschaft, Steuern},
  publisher = {Beck},
  address   = {M{\"u}nchen},
  issn      = {0340-7918},
  pages     = {1547},
  year      = {2010},
  abstract  = {Die SPAC-SE ist b{\"o}rsenf{\"a}hig und damit eine f{\"u}r eine SPAC grunds{\"a}tzlich geeignete Rechtsform. Die Tatsache, dass es sich hierbei (zun{\"a}chst) um eine leere, arbeitnehmerlose H{\"u}lle handelt, {\"a}ndert hieran nichts. Die Gr{\"u}ndung einer solchen Vorrats-SE ist trotz fehlender Arbeitnehmerbeteiligung unter teleologischer Reduktion von Art. 12 II SE-VO zul{\"a}ssig. Im Gegenzug muss die Arbeitnehmerbeteiligung gemaß \S 18 III SEBG analog nachgeholt werden, wenn das sp{\"a}ter erworbene Zielunternehmen auf die SPAC-SE verschmolzen werden soll. Aus gesellschaftsrechtlicher Sicht ist zu beachten, dass die SPAC-SE mit Sitz in Deutschland, welche auch den deutschen, aktienrechtlichen Bestimmungen unterliegt, nur bedingt f{\"u}r eine SPAC geeignet erscheint. Das deutsche Aktienrecht enth{\"a}lt strenge Regelungen, die der f{\"u}r eine SPAC-SE erforderlichen Flexibilit{\"a}t entgegenstehen k{\"o}nnen. Dies gilt insbesondere f{\"u}r das Erfordernis der Zustimmung der Hauptversammlung zur Akquisition des Zielunternehmens, die R{\"u}ckzahlung des Treuhandverm{\"o}gens an Aktion{\"a}re, die der Akquisition nicht zugestimmt haben und die Liquidation der SPAC-SE im Falle des Scheiterns des Erwerbs des Zielobjektes.},
  language  = {de}
}
@article{OrzadaMaderwaldPoseretal.2010,
  author    = {Orzada, Stephan and Maderwald, Stefan and Poser, Benedikt Andreas and Bitz, Andreas and Quick, Harald H. and Ladd, Mark E.},
  title     = {RF excitation using time interleaved acquisition of modes (TIAMO) to address B1 inhomogeneity in high-field MRI},
  series = {Magnetic Resonance in Medicine},
  volume    = {64},
  journal   = {Magnetic Resonance in Medicine},
  number    = {2},
  publisher = {Wiley-Liss},
  address   = {New York},
  issn      = {1522-2594},
  doi       = {10.1002/mrm.22527},
  pages     = {327 -- 333},
  year      = {2010},
  abstract  = {As the field strength and, therefore, the operational frequency in MRI is increased, the wavelength approaches the size of the human head/body, resulting in wave effects, which cause signal decreases and dropouts. Several multichannel approaches have been proposed to try to tackle these problems, including RF shimming, where each element in an array is driven by its own amplifier and modulated with a certain (constant) amplitude and phase relative to the other elements, and Transmit SENSE, where spatially tailored RF pulses are used. In this article, a relatively inexpensive and easy to use imaging scheme for 7 Tesla imaging is proposed to mitigate signal voids due to B1 field inhomogeneity. Two time-interleaved images are acquired using a different excitation mode for each. By forming virtual receive elements, both images are reconstructed together using GRAPPA to achieve a more homogeneous image, with only small SNR and SAR penalty in head and body imaging at 7 Tesla.},
  language  = {en}
}
@inproceedings{ParkButenwegReindl2010,
  author    = {Park, Jin and Butenweg, Christoph and Reindl, Lukas},
  title     = {Untersuchung der Eignung von Ankerschienensystemen unter Erdbebeneinwirkungen},
  series = {Conference proceedings / ANSYS Conference \& 28th CADFEM Users´ Meeting 2010 : 3. - 5. November 2010, Eurogess Aachen / CADFEM; ANSYS},
  booktitle = {Conference proceedings / ANSYS Conference \& 28th CADFEM Users´ Meeting 2010 : 3. - 5. November 2010, Eurogess Aachen / CADFEM; ANSYS},
  publisher = {CADFEM [u.a.]},
  address   = {Grafing},
  isbn      = {3-937523-07-3},
  pages     = {Dokument 2.11.1},
  year      = {2010},
  language  = {de}
}
@inproceedings{PaslighFunkeRoethetal.2010,
  author    = {Pasligh, N. and Funke, D. and R{\"o}th, Thilo and Krack, R.},
  title     = {Leichtbau Quertrager als Stahlblech-Aluminiumdruckguss-Hybrid - Von der numerischen Berechnung bis zum realen Prototypen},
  series = {VDI BERICHTE},
  booktitle = {VDI BERICHTE},
  publisher = {VDI Verlag},
  address   = {D{\"u}sseldorf},
  isbn      = {978-3-18-092107-5},
  pages     = {688 Seiten},
  year      = {2010},
  language  = {de}
}
@misc{PasteurLudwigTippkoetteretal.2010,
  author    = {Pasteur, A. and Ludwig, B. and Tippk{\"o}tter, Nils and Diller, R. and Kampeis, P. and Ulber, Roland},
  title     = {Aufarbeitung von β-Lactamantibiotika mittels selektiver, magnetischer Adsorbermaterialien},
  series = {Chemie Ingenieur Technik},
  volume    = {82},
  journal   = {Chemie Ingenieur Technik},
  number    = {9},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  doi       = {10.1002/cite.201050270},
  pages     = {1587},
  year      = {2010},
  abstract  = {b-Lactame geh{\"o}ren zu den wirkungsvollsten Antibiotika, jedoch lassen sich viele nur schwierig fermentativ erzeugen. Ein Problem bei der fermentativen Produktion ist die Hydrolyse des Lactamrings im w{\"a}ssrigen Milieu. Das Ziel des von der DBU gef{\"o}rderten Projekts ist die selektive In-situ-Adsorption der b-Lactamantibiotika unter anschließender magnetischer Separation. Durch die Isolation im Hochgradientenmagnetseparator (HGMS) ist eine Fest-fest-fl{\"u}ssig-Trennung und somit ein erheblicher Zeitgewinn im Downstreamprozess m{\"o}glich. Zus{\"a}tzlich kommt es zur Einsparung an L{\"o}sungsmittel und Energie, was neben Reduzierung der Antibiotikahydrolyse auch in {\"o}kologischer Hinsicht einen interessanten Aspekt darstellt. Als Tr{\"a}germaterial f{\"u}r die Adsorbermatrix werden magnetisierbare Eisenoxidpartikel eingesetzt, die in einer Silikamatrix eingebettet sind. Diese Adsorber sollen auf Selektivit{\"a}t in Wasser und verschiedenen Medien getestet werden. Zus{\"a}tzlich werden die Abbauprodukte des b-Lactams analysiert, um eine Aussage {\"u}ber die Stabilisierung des Antibiotikums durch die selektiven Adsorber treffen zu k{\"o}nnen. Diese Ergebnisse werden mit kommerziell erh{\"a}ltlichen Adsorbern verglichen. Die Aufreinigung der Antibiotika soll direkt aus der Fermentationsbr{\"u}he erfolgen. Um die Trennung der magnetischen, selektiven Adsorber von der Biomasse zu gew{\"a}hrleisten, soll der HGMS in die Fermentation integriert werden. Das filament{\"o}se Wachstum des Mikroorganismus erfordert eine Neuauslegung der Filtermatrix.},
  language  = {de}
}
@article{PaulssenAlbertoAbram2010,
  author    = {Paulßen, Elisabeth and Alberto, Roger and Abram, Ulrich},
  title     = {Synthesis, Characterization, and Structures of R3EOTcO3 Complexes (E = C, Si, Ge, Sn, Pb) and Related Compounds},
  series = {Inorganic Chemistry},
  volume    = {49},
  journal   = {Inorganic Chemistry},
  number    = {7},
  publisher = {American Chemical Society},
  address   = {Washington},
  issn      = {1520-510X},
  doi       = {10.1021/ic1001094},
  pages     = {3525 -- 3530},
  year      = {2010},
  abstract  = {AgTcO4 reacts with R3ECl compounds (E = C, Si, Ge, Sn, Pb; R = Me, iPr, tBu, Ph), tBu2SnCl2, or PhMgCl under formation of novel trioxotechnetium(VII) derivatives. The carbon and silicon derivatives readily undergo decomposition, which was proven by 99Tc NMR spectroscopy and the isolation of decomposition products such as [TcOCl3(THF)(OH2)]. Compounds [Ph3GeOTcO3], [(THF)Ph3SnOTcO3], [(O3TcO)SntBu2(OH)]2, and [(THF)4Mg(OTcO3)2] are more stable and were isolated in crystalline form and characterized by X-ray diffraction.},
  language  = {en}
}
@article{PaulssenSchweighoeferAbram2010,
  author    = {Paulßen, Elisabeth and Schweigh{\"o}fer, Philip V. and Abram, Ulrich},
  title     = {Reactions of [ReOX3(PPh3)2] Complexes (X = Cl, Br) with Phenylacetylene and the Structures of the Products},
  series = {Zeitschrift f{\"u}r anorganische und allgemeine Chemie : ZAAC = Journal of inorganic and general chemistry},
  volume    = {636},
  journal   = {Zeitschrift f{\"u}r anorganische und allgemeine Chemie : ZAAC = Journal of inorganic and general chemistry},
  number    = {5},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1521-3749},
  doi       = {10.1002/zaac.200900478},
  pages     = {779 -- 783},
  year      = {2010},
  abstract  = {Oxorhenium(V) complexes [ReOX3(PPh3)2] (X = Cl, Br) react with phenylacetylene under formation of complexes with ylide-type ligands. Compounds of the compositions [ReOCl3(PPh3){C(Ph)C(H)(PPh3)}] (1), [ReOBr3(OPPh3){C(Ph)C(H)(PPh3)}] (2), and [ReOBr3(OPPh3){C(H)C(Ph)(PPh3)}] (3) were isolated and characterized by X-ray diffraction. They contain a ligand, which was formed by a nucleophilic attack of released PPh3 at coordinated phenylacetylene. The structures of the products show that there is no preferable position for this attack. Cleavage of the Re-C bond in 3 and dimerization of the organic ligand resulted in the formation of the [{(PPh3)(H)CC(Ph)}2]2+ cation, which crystallized as its [(ReOBr4)(OReO3)]2- salt.},
  language  = {en}
}
@inproceedings{PenneProfittlichRingbecketal.2010,
  author    = {Penne, Jochen and Profittlich, Martin and Ringbeck, Thorsten and Buxbaum, Bernd},
  title     = {Touchless detailed 3D scan of human hand anatomy using time-of-flight cameras},
  series = {Proceedings of the International Conference on 3D Body Scanning Technologies : Lugano, Switzerland, 19-20 October 2010},
  booktitle = {Proceedings of the International Conference on 3D Body Scanning Technologies : Lugano, Switzerland, 19-20 October 2010},
  editor    = {D, Nicola D'Apuzzo},
  publisher = {Hometrica Consulting},
  address   = {Z{\"u}rich},
  isbn      = {978-3-033-02714-5},
  pages     = {361 -- 369},
  year      = {2010},
  language  = {en}
}
@phdthesis{Pettrak2010,
  author    = {Pettrak, J{\"u}rgen},
  title     = {Nutzung nachwachsender Rohstoffe bei der Herstellung thermoplastischer Elastomere aus Folgeprodukten der Olefinmetathese},
  publisher = {Technische Universit{\"a}t M{\"u}nchen},
  address   = {M{\"u}nchen},
  pages     = {137 Seiten},
  year      = {2010},
  abstract  = {Metathese von {\"O}ls{\"a}ure und Derivaten ist ein interessanter Weg f{\"u}r die Synthese bifunktioneller Verbindungen aus nachwachsenden Rohstoffen. Verwendet wurden Ru-Katalysatoren der zweiten Generation, welche eine hohe Toleranz gegen{\"u}ber funktionellen Gruppen und Verunreinigungen aufweisen. Trotz des Einsatzes technischer Edukte waren Umsetzungen mit niedrigen Katalysatormengen (0.001 - 0.01 mol-\%) m{\"o}glich, mit Ausbeuten entsprechend der Literatur. Kreuzmetathesen erm{\"o}glichten variable Kettenl{\"a}ngen und Funktionalit{\"a}ten der Monomere, die Produktgewinnung ist jedoch aufw{\"a}ndig. Selbstmetathese lieferte C18-bifunktionelle Verbindungen, welche einfach durch Destillation oder Kristallisation isoliert werden k{\"o}nnen. Neben der katalystischen Umsetzung wurde auch die Produktgewinnung untersucht und f{\"u}r ausgew{\"a}hlte Produkte auch im gr{\"o}ßeren Maßstab durchgef{\"u}hrt.},
  language  = {de}
}
@inproceedings{PfaffLarkowskiBurnham2010,
  author    = {Pfaff, Raphael and Larkowski, Tomasz and Burnham, Keith J.},
  title     = {An approach to adaptive control in the behavioural framework},
  series = {UKACC International Conference on Control 2010 (CONTROL 2010) : Coventry, United Kingdom, 7 - 10 September 2010 ; Vol. 2. (IET seminar digest ; 2010/004)},
  booktitle = {UKACC International Conference on Control 2010 (CONTROL 2010) : Coventry, United Kingdom, 7 - 10 September 2010 ; Vol. 2. (IET seminar digest ; 2010/004)},
  publisher = {Curran},
  address   = {Red Hook, NY},
  organization    = {United Kingdom Automatic Control Council},
  isbn      = {978-1-62748-119-9},
  pages     = {833 -- 838},
  year      = {2010},
  language  = {en}
}
@inproceedings{PhamVuTranetal.2010,
  author    = {Pham, Phu Tinh and Vu, Khoi Duc and Tran, Thanh Ngoc and Staat, Manfred},
  title     = {A primal-dual algorithm for shakedown analysis of elastic-plastic bounded linearly kinematic hardening bodies},
  year      = {2010},
  language  = {en}
}
@article{PieperKlein2010,
  author    = {Pieper, Martin and Klein, Peter},
  title     = {Numerical solution of the heat equation with non-linear, time derivative-dependent source term},
  series = {International Journal for Numerical Methods in Engineering},
  volume    = {84},
  journal   = {International Journal for Numerical Methods in Engineering},
  number    = {10},
  publisher = {Wiley},
  address   = {Chichester},
  issn      = {0029-5981},
  doi       = {10.1002/nme.2937},
  pages     = {1205 -- 1221},
  year      = {2010},
  abstract  = {The mathematical modeling of heat conduction with adsorption effects in coated metal structures yields the heat equation with piecewise smooth coefficients and a new kind of source term. This term is special, because it is non-linear and furthermore depends on a time derivative. In our approach we reformulated this as a new problem for the usual heat equation, without source term but with a new non-linear coefficient. We gave an existence and uniqueness proof for the weak solution of the reformulated problem. To obtain a numerical solution, we developed a semi-implicit and a fully implicit finite volume method. We compared these two methods theoretically as well as numerically. Finally, as practical application, we simulated the heat conduction in coated aluminum fibers with adsorption in the zeolite coating. Copyright © 2010 John Wiley \& Sons, Ltd.},
  language  = {en}
}
@inproceedings{PoghossianWagnerSchoening2010,
  author    = {Poghossian, Arshak and Wagner, Holger and Sch{\"o}ning, Michael Josef},
  title     = {Automatisiertes „wafer level"-Testsystem zur Charakterisierung von siliziumbasierten Chemo- und Biosensoren},
  series = {Tagungsband: Sensoren und Messsysteme 2010},
  booktitle = {Tagungsband: Sensoren und Messsysteme 2010},
  publisher = {VDE Verlag},
  address   = {Berlin},
  isbn      = {978-3-8007-3260-9},
  pages     = {89 -- 92},
  year      = {2010},
  abstract  = {Es wurde ein automatisiertes, computerunterst{\"u}tztes Testsystem f{\"u}r die Funktionspr{\"u}fung und Charakterisierung von (bio-)chemischen Sensoren auf Waferebene entwickelt und in einen konventionellen Spitzenmessplatz integriert. Das System erm{\"o}glicht die Charakterisierung und Identifizierung „funktionstauglicher" Sensoren bereits auf Waferebene zwischen den einzelnen Herstellungsschritten, wodurch weitere, bisher {\"u}bliche Verarbeitungsschritte wie das Fixieren, Bonden und Verkapseln f{\"u}r die defekten oder nicht funktionstauglichen Sensorstrukturen entf{\"a}llt. Außerdem bietet eine speziell entworfene miniaturisierte Durchflussmesszelle die M{\"o}glichkeit, bereits auf Waferlevel die Sensitivit{\"a}t, Drift, Hysterese und Ansprechzeit der (bio-)chemischen Sensoren zu charakterisieren. Das System wurde exemplarisch mit kapazitiven, pH-sensitiven EIS- (Elektrolyt-Isolator-Silizium) Strukturen und ISFET- (ionensensitiver Feldeffekttransistor) Strukturen mit verschiedenen Geometrien und Gate-Layouts getestet.},
  language  = {de}
}
@inproceedings{PompSchwarzboezlKolletal.2010,
  author    = {Pomp, Stefan and Schwarzb{\"o}zl, Peter and Koll, Gerrit and Hennecke, Klaus and Schmitz, Mark and Hoffschmidt, Bernhard},
  title     = {Advanced concept for a solar thermal power plant with open volumetric air receiver},
  series = {SolarPACES 2010 : the CSP Conference: electricity, fuels and clean water from concentrated solar energy ; 21 to 24 September 2010, Perpignan, France},
  booktitle = {SolarPACES 2010 : the CSP Conference: electricity, fuels and clean water from concentrated solar energy ; 21 to 24 September 2010, Perpignan, France},
  publisher = {Soc. OSC},
  address   = {Saint Maur},
  pages     = {97 -- 98},
  year      = {2010},
  language  = {en}
}
@misc{PothMonzonTippkoetteretal.2010,
  author    = {Poth, S. and Monzon, M. and Tippk{\"o}tter, Nils and Ulber, Roland},
  title     = {Lignocellulose-Bioraffinerie: Simultane Verzuckerung und Fermentation},
  series = {Chemie Ingenieur Technik},
  volume    = {82},
  journal   = {Chemie Ingenieur Technik},
  number    = {9},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  doi       = {10.1002/cite.201050360},
  pages     = {1568},
  year      = {2010},
  abstract  = {Die am h{\"a}ufigsten genutzten Rohstoffe f{\"u}r die Produktion von Treibstoffen und Chemikalien sind fossilen Ursprungs. Da diese limitiert sind, werden im Hinblick auf die Nachhaltigkeit alternative, erneuerbare Rohstoffquellen intensiv untersucht. Vielversprechend in diesem Kontext sind die in Lignocellulose enthaltenen Zucker, die beispielsweise zur Produktion von Ethanol genutzt werden k{\"o}nnen. In der Regel sind f{\"u}r eine Lig-nocellulose-Bioraffinerie mehrere Prozessschritte notwendig: Vorbehandlung, Verzuckerung und Fermentation. Um diesen Prozess einfacher zu gestalten, ist es m{\"o}glich, die Verzuckerung und die Fermentation in einem Schritt durchzuf{\"u}hren (SSF). Als Substrat wird hier Cellulose-Faserstoff verwendet, der durch das Organosolv-Verfahren aufgeschlossen wurde. Die Hydrolyse erfolgt mit kommerziell erh{\"a}ltlichen Enzymen und f{\"u}r die Fermentation zu Ethanol werden zwei Hefen verwendet. Beim SSF-Verfahren konnte, im Vergleich zur entkoppelten Verfahrensweise, trotz bestehender Unterschiede in den Temperatur-Optima von Enzymen und Hefen eine Steigerung in der Ethanol-Ausbeute von 0,15 auf 0,2 gg⁻¹ beobachtet werden. Um wirtschaftliche Ausbeuten und Konzentrationen des Produkts erzielen zu k{\"o}nnen, ist es notwendig den Prozess weiter zu optimieren. Im Einzelfall muss {\"u}berpr{\"u}ft werden, ob diese Verfahrensweise auch f{\"u}r die Produktion anderer interessanter Stoffe (wie Itacons{\"a}ure, Bernsteins{\"a}ure) geeignet ist.},
  language  = {de}
}
@inproceedings{PothMonzonTippkoetteretal.2010,
  author    = {Poth, Sebastian and Monzon, Magaly and Tippk{\"o}tter, Nils and Ulber, Roland},
  title     = {Lignocellulosic biorefinery : process integration of hydrolysis and fermentation},
  series = {Proceedings / 11th European Workshop on Lignocellulosics and Pulp : August 16 - 19, 2010, Hamburg, Germany},
  booktitle = {Proceedings / 11th European Workshop on Lignocellulosics and Pulp : August 16 - 19, 2010, Hamburg, Germany},
  publisher = {vTi},
  address   = {Hamburg},
  pages     = {65 -- 68},
  year      = {2010},
  language  = {en}
}
@article{PresslerEsefeldScherretal.2010,
  author    = {Pressler, Axel and Esefeld, Katrin and Scherr, Johannes and Ali, Mohammad and Hanssen, Henner and Kotliar, Konstantin and Lanzl, Ines and Halle, Martin and Kaemmerer, Harald and Schmidt-Trucks{\"a}ss, Arno and Hager, Alfred},
  title     = {Structural alterations of retinal arterioles in adults late after repair of aortic isthmic coarctation},
  series = {The American Journal of Cardiology},
  volume    = {105},
  journal   = {The American Journal of Cardiology},
  number    = {5},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0002-9149},
  doi       = {10.1016/j.amjcard.2009.10.070},
  pages     = {740 -- 744},
  year      = {2010},
  abstract  = {Patients after coarctation repair still have an increased risk of cardiovascular or cerebrovascular events. This has been explained by the persisting hypertension and alterations in the peripheral vessels. However, involvement of the central vessels such as the retinal arteries is virtually unknown. A total of 34 patients after coarctation repair (22 men and 12 women; 23 to 58 years old, age range 0 to 32 years at surgical repair) and 34 nonhypertensive controls underwent structural and functional retinal vessel analysis. Using structural analysis, the vessel diameters were measured. Using functional analysis, the endothelium-dependent vessel dilation in response to flicker light stimulation was assessed. In the patients after coarctation repair, the retinal arteriolar diameter was significantly reduced compared to that of the controls (median 182 μm, first to third quartile 171 to 197; vs 197 μm, first to third quartile 193 to 206; p <0.001). These findings were independent of the peripheral blood pressure and age at intervention. No differences were found for venules. The functional analysis findings were not different between the patients and controls (maximum dilation 3.5\%, first to third quartile 2.1\% to 4.5\% vs 3.6\%, first to third quartile 2.2\% to 4.3\%; p = 0.81), indicating preserved autoregulative mechanisms. In conclusion, the retinal artery diameter is reduced in patients after coarctation repair, independent of their current blood pressure level and age at intervention. As a structural marker of chronic vessel damage associated with past, current, or future hypertension, retinal arteriolar narrowing has been linked to stroke incidence. These results indicate an involvement of cerebral microcirculation in aortic coarctation, despite timely repair, and might contribute to explain the increased rate of cerebrovascular events in such patients.},
  language  = {en}
}
@article{ProbstBehbahaniBorrmannetal.2010,
  author    = {Probst, M. and Behbahani, Mehdi and Borrmann, E. and Elgeti, S. and Nicolai, M. and Behr, Marek},
  title     = {Hemodynamic Modeling for Numerical Analysis and Design of Medical Devices},
  year      = {2010},
  language  = {en}
}
@incollection{Raatschen2010,
  author    = {Raatschen, Hans-J{\"u}rgen},
  title     = {Von der K{\"o}niglichen H{\"o}heren Maschinenbauschule Aachen zu den Ingenieurfachbereichen der FH Aachen},
  series = {Ingenieurfreunde FH Aachen : 75 Jahre F{\"o}rderverein; Elektrotechnik und Informationstechnik, Luft- und Raumfahrttechnik, Maschinenbau und Mechatronik},
  booktitle = {Ingenieurfreunde FH Aachen : 75 Jahre F{\"o}rderverein; Elektrotechnik und Informationstechnik, Luft- und Raumfahrttechnik, Maschinenbau und Mechatronik},
  publisher = {Klinkenberg},
  address   = {Aachen},
  isbn      = {978-3-941704-03-9},
  pages     = {13 -- 18},
  year      = {2010},
  subject      = {Geschichte},
  language  = {de}
}
@incollection{Raatschen2010,
  author    = {Raatschen, Hans-J{\"u}rgen},
  title     = {75 Jahre Vereinsgeschichte},
  series = {Ingenieurfreunde FH Aachen : 75 Jahre F{\"o}rderverein; Elektrotechnik und Informationstechnik, Luft- und Raumfahrttechnik, Maschinenbau und Mechatronik},
  booktitle = {Ingenieurfreunde FH Aachen : 75 Jahre F{\"o}rderverein; Elektrotechnik und Informationstechnik, Luft- und Raumfahrttechnik, Maschinenbau und Mechatronik},
  publisher = {Klinkenberg},
  address   = {Aachen},
  isbn      = {978-3-941704-03-9},
  pages     = {66 -- 72},
  year      = {2010},
  subject      = {Geschichte},
  language  = {de}
}
@inproceedings{ReckerBosschaertsWagemakersetal.2010,
  author    = {Recker, Elmar and Bosschaerts, Walter and Wagemakers, Rolf and Hendrick, Patrick and Funke, Harald and B{\"o}rner, Sebastian},
  title     = {Experimental study of a round jet in cross-flow at low momentum ratio},
  pages     = {13 Seiten},
  year      = {2010},
  abstract  = {With the final objective of optimizing the "Micromix" hydrogen combustion principle, a round jet in a laminar cross-flow prior to its combustion is investigated experimentally using Stereoscopic Particle Image Velocimetry. Measurements are performed at a jet to cross-stream momentum ratio of 1 and a Reynolds number, based on the jet diameter and jet velocity, of 1600. The suitability to combine side, top and end views is analyzed statistically. The statistical theory of testing hypotheses, pertaining to the joint distribution of the averaged velocity along intersecting observation planes, is employed. Overall, the averaged velocity fields of the varying observation planes feature homogeneity at a 0.05 significance level. Minor discrepancies are related to the given experimental conditions. By use of image maps, averaged and instantaneous velocity fields, an attempt is made to elucidate the flow physics and a kinematically consistent vortex model is proposed. In the time-averaged flow field, the principal vortical systems were identified and the associated mixing visualized. The jet trajectory and physical dimensions scale with the momentum ratio times the jet diameter. The jet/cross-flow mixture converging upon the span-wise centre-line, the lifting action of the Counter Rotating Vortex Pair and the reversed flow region contribute to the high entrainment and mixedness. It is shown that the jet width is larger on the downstream side as compared to the upstream side of the centre-streamline. The deepest penetration of the particles on the outer boundary occurs in the centre-plane. Meanwhile, with increasing off-centre position, the boundaries all lay further from the centre-line position than does the boundary in the centre-plane, corresponding to a kidney-like shape of the flow cross-section. The generation of the Counter Rotating Vortex Pair and the instability mechanism is documented by instantaneous image maps and vector fields. The necessary circulation for the Counter Rotating Vortex Pair originates from a combined effect of steady in-hole, hanging and wake vortices. The strong cross-flow and jet interaction induces a three-dimensional waving, the stream-wise Counter Rotating Vortex Pair pair, leading to the formation of Ring Like Vortices. A secondary Counter Rotating Vortex Pair forms on top of the primary Counter Rotating Vortex Pair, resulting in mixing by "puffs". Overall, Stereoscopic Particle Image Velocimetry proofed capable of elucidating the Jet in Cross-Flow complex flow field. The gained insight in the mixing process will definitely contribute to the "Micromix" hydrogen combustion optimization.},
  language  = {en}
}
@incollection{ReimerBraunWellmeretal.2010,
  author    = {Reimer, Lars and Braun, Carsten and Wellmer, Georg and Behr, Marek and Ballmann, Josef},
  title     = {Development of a modular method for computational aero-structural analysis of aircraft},
  series = {Summary of flow modulation and fluid-structure interaction findings. Results of the Collaborative Research Center SFB 401 at the RWTH Aachen University, Aachen, Germany, 1997-2008 / ed.: Wolfgang Schr{\"o}der. Notes on numerical fluid mechanics and multidisciplinary design. Vol. 109},
  booktitle = {Summary of flow modulation and fluid-structure interaction findings. Results of the Collaborative Research Center SFB 401 at the RWTH Aachen University, Aachen, Germany, 1997-2008 / ed.: Wolfgang Schr{\"o}der. Notes on numerical fluid mechanics and multidisciplinary design. Vol. 109},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-642-04087-0},
  pages     = {205 -- 238},
  year      = {2010},
  language  = {en}
}
@inproceedings{ReindlParkNordaetal.2010,
  author    = {Reindl, Lukas and Park, Jin and Norda, Hannah and Butenweg, Christoph},
  title     = {Seismic design of masonry walls subject to out-of-plane bending},
  series = {Proceedings of the Tenth International Conference on Computational Structures Technology : Valencia, Spain, 14 - 17 September 2010 / organised in association with: Universidad Politecnica de Valencia ... Ed. by B. H. V. Topping ...},
  booktitle = {Proceedings of the Tenth International Conference on Computational Structures Technology : Valencia, Spain, 14 - 17 September 2010 / organised in association with: Universidad Politecnica de Valencia ... Ed. by B. H. V. Topping ...},
  publisher = {Civil-Comp Press},
  address   = {Kippen},
  organization    = {International Conference on Computational Structures Technology <10, 2010, Valencia>},
  isbn      = {978-1-905088-36-2},
  doi       = {10.4203/ccp.93.348},
  pages     = {Paper 348},
  year      = {2010},
  language  = {en}
}
@article{ReisertHenkelSchneideretal.2010,
  author    = {Reisert, Steffen and Henkel, Hartmut and Schneider, Andreas and Sch{\"a}fer, Daniel and Friedrich, Peter and Berger, J{\"o}rg and Sch{\"o}ning, Michael Josef},
  title     = {Development of a handheld sensor system for the online measurement of hydrogen peroxide in aseptic filling systems},
  series = {Physica Status Solidi (A)},
  volume    = {207},
  journal   = {Physica Status Solidi (A)},
  number    = {4},
  publisher = {Wiley-VCH},
  address   = {Berlin},
  issn      = {1862-6300},
  doi       = {10.1002/pssa.200983304},
  pages     = {913 -- 918},
  year      = {2010},
  abstract  = {A handheld sensor system for the online measurement of hydrogen peroxide (H2O2) in aseptic sterilisation processes has been developed. It is based on a calorimetric-type gas sensor that consists of a differential set-up of two temperature sensors, of which one is catalytically activated and the second one is passivated and used as reference. The sensor principle relies in detecting a rise in temperature on the active sensor due to the exothermic reaction of H2O2 on the catalytic surface. To characterise the sensor system towards H2O2 sensitivity and other influencing factors, measurements have been carried out both at an experimental set-up and a manufacturer's sterilisation machine. Physical sensor characterisation was done by means of the optical microscopy.},
  language  = {en}
}
@inproceedings{ReisgenSchleserHarmsetal.2010,
  author    = {Reisgen, Uwe and Schleser, Markus and Harms, Alexander and Schiebahn, Alexander},
  title     = {Konduktiv unterst{\"u}tztes R{\"u}hrreibschweißen an Stahl- und Aluminiumwerkstoffen},
  series = {DVS congress 2010 : Große Schweißtechnische Tagung ; Studentenkongress ; Statusseminar "Schneidtechnik" ; Abschlusskolloquium zum AiF-Forschungscluster "Integration des R{\"u}hrreibschweißens in Fertigungsprozessketten" ; Vortr{\"a}ge der Veranstaltung in N{\"u}rnberg am 27. und 28. September 2010. (DVS-Berichte ; 267)},
  booktitle = {DVS congress 2010 : Große Schweißtechnische Tagung ; Studentenkongress ; Statusseminar "Schneidtechnik" ; Abschlusskolloquium zum AiF-Forschungscluster "Integration des R{\"u}hrreibschweißens in Fertigungsprozessketten" ; Vortr{\"a}ge der Veranstaltung in N{\"u}rnberg am 27. und 28. September 2010. (DVS-Berichte ; 267)},
  publisher = {DVS Media},
  address   = {D{\"u}sseldorf},
  organization    = {Deutscher Verband f{\"u}r Schweißen und Verwandte Verfahren ; Große Schweißtechnische Tagung <2010, N{\"u}rnberg>},
  isbn      = {978-3-87155-592-3},
  pages     = {394 -- 398},
  year      = {2010},
  language  = {de}
}
@article{ReisgenSchleserJerabeketal.2010,
  author    = {Reisgen, Uwe and Schleser, Markus and Jerabek, Jakub and Chudoba, Rostislav},
  title     = {Messung der Strahlqualit{\"a}t einer Elektronenstrahlanlage in Umgebungsatmosph{\"a}re},
  series = {Materialwissenschaft und Werkstofftechnik},
  volume    = {41},
  journal   = {Materialwissenschaft und Werkstofftechnik},
  number    = {1},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1521-4052},
  pages     = {45 -- 52},
  year      = {2010},
  abstract  = {In den letzten Jahrzehnten hat das Elektronenstrahlschweißen, das bereits im gr{\"o}ßeren Maßstab verwendet wird, seine F{\"a}higkeit als qualitatives Werkzeug f{\"u}r die Verbindung verschiedener Materialen nachgewiesen. Das Non Vacuum Electron Beam Welding (NV-EBW) hat zahlreiche Vorteile im Vergleich zum Elektronenstrahlschweißen im Vakuum, da man unter normalem Atmosph{\"a}rendruck arbeiten kann. Im Hinblick auf die reproduzierbare Qualit{\"a}t, insbesondere im Bereich der Massen-Fertigung, ist die Kontrolle der Strahlparameter sowie deren Einfluss auf das Schweißergebnis von großer Bedeutung. Durch eine genaue Kenntnis der Strahlkenngr{\"o}ßen wie des Strahldurchmessers und der Leistungsdichteverteilung kann eine Aussage {\"u}ber die sich ausbildende Schweißnaht sowie die Schweißbaddynamik getroffen werden. Messungen der Strahlkenngr{\"o}ßen im Prozess erlauben insbesondere die Untersuchung von Humping-Effekten. In diesem Beitrag wird der Prozess der Elektronenstrahlvermessung unter atmosph{\"a}rischen Bedingungen beschrieben. Es wird zudem die Abh{\"a}ngigkeit der Elektronenstrahlcharakteristika von den verschiedenen Prozessparametern dargestellt.},
  language  = {de}
}
@article{ReisgenSchleserMokrovetal.2010,
  author    = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Ahmed, Essam},
  title     = {Uni- and bi-axial deformation behavior of laser welded advanced high strength steel sheets},
  series = {Journal of materials processing technology},
  volume    = {210},
  journal   = {Journal of materials processing technology},
  number    = {15},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0924-0136},
  doi       = {http10.1016/j.jmatprotec.2010.08.003},
  pages     = {2188 -- 2196},
  year      = {2010},
  abstract  = {Bead-on-plate butt joints of 2.5 mm hot rolled DP600/DP600 and 1.2 mm cold rolled TRIP700/TRIP700 steel sheets were performed using 6 kW CO2 laser beam welding. The welding speed ranged from 1.5 to 3.0 and from 2.1 to 3.9 m/min in DP/DP and TRIP/TRIP steel weldments respectively. A top surface helium gas was used as a shielding gas at a flow rate of 20 l/min. Metallographic examinations and transverse tensile testing (DIN EN 895: 1995) were carried out to characterize the weldments. The formability of base metals and weldments were investigated by standard Erichsen test (DIN EN ISO 20482). It was found that the uniaxial plastic behavior of both DP600 and TRIP700 base metals was in agreement with Swift and modified Mecking-Kocks models respectively. In a perpendicular tensile test to the weld line, all specimens were fractured at the base metal however the strengths were somewhat higher than those of base metal. There was a significant reduction in formability caused by welding of both DP/DP and TRIP/TRIP steel weldments and the formability has been improved with the increase of the welding speed.},
  language  = {en}
}
@article{ReisgenSchleserMokrovetal.2010,
  author    = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Ahmed, Essam},
  title     = {Shielding gas influences on laser weldability of tailored blanks of advanced automotive steels},
  series = {Applied surface science},
  volume    = {257},
  journal   = {Applied surface science},
  number    = {5},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0169-4332 (E-Journal); 0169-4332 (Print)},
  doi       = {10.1016/j.apsusc.2010.08.042},
  pages     = {1401 -- 1406},
  year      = {2010},
  abstract  = {The effects of shielding gas types and flow rates on CO2 laser weldability of DP600/TRIP700 steel sheets were studied in this work. The evaluated shielding gases were helium (He), argon (Ar) and different mixtures of He and Ar. Weld penetration, tensile strength and formability (Erichsen test) of laser welds were found to be strongly dependent upon the shielding gas types. The ability of shielding gas in removing plasma plume and thus increasing weld penetration is believed to be closely related to ionization potential and atomic weight which determine the period of plasma formation and disappearance. It was found that the higher helium shielding gas flow rate, the deeper weld penetration and the lower weld width.},
  language  = {en}
}
@inproceedings{ReisgenSchleserMokrovetal.2010,
  author    = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Schmidt, A. and Rossiter, E. and Loose, T.},
  title     = {Durchg{\"a}ngige Schweißsimulation der Eigenspannung und des Gef{\"u}gezustands auf Basis realer Schweißstromquellenparameter},
  series = {DVS congress 2010 : Große Schweißtechnische Tagung ; Studentenkongress ; Statusseminar "Schneidtechnik" ; Abschlusskolloquium zum AiF-Forschungscluster "Integration des R{\"u}hrreibschweißens in Fertigungsprozessketten" ; Vortr{\"a}ge der Veranstaltung in N{\"u}rnberg am 27. und 28. September 2010. (DVS-Berichte ; 267)},
  booktitle = {DVS congress 2010 : Große Schweißtechnische Tagung ; Studentenkongress ; Statusseminar "Schneidtechnik" ; Abschlusskolloquium zum AiF-Forschungscluster "Integration des R{\"u}hrreibschweißens in Fertigungsprozessketten" ; Vortr{\"a}ge der Veranstaltung in N{\"u}rnberg am 27. und 28. September 2010. (DVS-Berichte ; 267)},
  publisher = {DVS Media},
  address   = {D{\"u}sseldorf},
  organization    = {Deutscher Verband f{\"u}r Schweißen und Verwandte Verfahren ; Große Schweißtechnische Tagung <2010, N{\"u}rnberg>},
  isbn      = {978-3-87155-592-3},
  pages     = {37 -- 42},
  year      = {2010},
  language  = {de}
}
@inproceedings{ReisgenSchleserSchiebahnetal.2010,
  author    = {Reisgen, Uwe and Schleser, Markus and Schiebahn, Alexander and Harms, Alexander},
  title     = {Einfluss der Maschineneigenschaften beim Widerstandspunktschweißen mit Schweißzangen},
  series = {Treffpunkt Widerstandsschweißen : Vortr{\"a}ge der gleichnamigen Sondertagung in Duisburg am 05. und 06. Mai 2010 ; [21. DVS-Sondertagung Widerstandsschweissen 2010 ; Tagungsband]},
  booktitle = {Treffpunkt Widerstandsschweißen : Vortr{\"a}ge der gleichnamigen Sondertagung in Duisburg am 05. und 06. Mai 2010 ; [21. DVS-Sondertagung Widerstandsschweissen 2010 ; Tagungsband]},
  publisher = {GSI SLV Duisburg},
  address   = {Duisburg},
  organization    = {Deutscher Verband f{\"u}r Schweißen und Verwandte Verfahren ; Schweißtechnische Lehr- und Versuchsanstalt <Duisburg> ; DVS-Sondertagung Widerstandsschweißen <21, 2010, Duisburg>},
  pages     = {147 -- 149},
  year      = {2010},
  language  = {de}
}
@incollection{ReisgenSchleserStieglitz2010,
  author    = {Reisgen, Uwe and Schleser, Markus and Stieglitz, Anja},
  title     = {Kleben in anspruchsvollen Anwendungsbereichen},
  series = {Jahrbuch Schweißtechnik 2011},
  booktitle = {Jahrbuch Schweißtechnik 2011},
  publisher = {DVS},
  address   = {D{\"u}sseldorf},
  isbn      = {0935-0292},
  pages     = {226 -- 235},
  year      = {2010},
  language  = {de}
}
@inproceedings{ReisgenSchoeneSchleseretal.2010,
  author    = {Reisgen, Uwe and Schoene, Jens and Schleser, Markus and Jerabek, Jakub and Keil, Allessandra},
  title     = {Theoretical and experimental investigations on textile-reinforced concrete spalling behavior},
  series = {Textile reinforced concrete : 2nd ICTRC : International RILEM Conference on Material Science : Aachen Germany, September 6 - 8, 2010. Vol. 1. (RILEM Proceedings PRO ; 75)},
  booktitle = {Textile reinforced concrete : 2nd ICTRC : International RILEM Conference on Material Science : Aachen Germany, September 6 - 8, 2010. Vol. 1. (RILEM Proceedings PRO ; 75)},
  editor    = {Brameshuber, Wolfgang},
  publisher = {RILEM Publ.},
  address   = {Bagneux},
  organization    = {International Conference of Textile Reinforced Concrete <2, 2010, Aachen>},
  isbn      = {978-2-35158-106-3},
  pages     = {153 -- 162},
  year      = {2010},
  language  = {en}
}
@inproceedings{ReisgenSchoeneSchleseretal.2010,
  author    = {Reisgen, Uwe and Schoene, Jens and Schleser, Markus and Pak, Daniel},
  title     = {F{\"u}getechniken f{\"u}r neuartige Bauweisen auf Basis von d{\"u}nnwandigen Strukturelementen aus textilbewehrtem Beton},
  series = {30. Assistentenseminar F{\"u}ge- und Schweißtechnik : Vortr{\"a}ge der gleichnamigen Veranstaltung auf der Burg Warberg vom 3. bis 5. September 2009. (DVS-Berichte. 268)},
  booktitle = {30. Assistentenseminar F{\"u}ge- und Schweißtechnik : Vortr{\"a}ge der gleichnamigen Veranstaltung auf der Burg Warberg vom 3. bis 5. September 2009. (DVS-Berichte. 268)},
  publisher = {DVS-Media},
  address   = {D{\"u}sseldorf},
  organization    = {Assistentenseminar F{\"u}ge- und Schweißtechnik <30, 2009, Warberg> ; Institut f{\"u}r Schweiß- und F{\"u}getechnik <Aachen>},
  isbn      = {978-3-87155-260-1},
  pages     = {36 -- 43},
  year      = {2010},
  language  = {de}
}