@masterthesis{Koch2023,
  type      = {Bachelor Thesis},
  author    = {Koch, Greta},
  title     = {Eine monothematische Publikation zum Thema "Zeit"},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {56 Seiten},
  year      = {2023},
  abstract  = {Zeit spielt in unser aller Leben eine allgegenw{\"a}rtige Rolle. Sie ist immer da, war schon immer da und nimmt ihren Lauf, ganz egal was wir tun. Aber was macht die Zeit und was hat sie f{\"u}r einen Einfluss auf uns? Ist sie unsere st{\"a}ndige Begleiterin oder unsere »Gegnerin«? Wie unterschiedlich wir auf Zeit blicken k{\"o}nnen, was sie bewirkt und wie unser Umgang mit ihr das Leben beeinflusst, zeigt die Reihe an monothematischen Magazinen »about time«. Das Thema wird aus unterschiedlichsten Blickwinkeln beleuchtet und soll so eine gewisse Sensibilit{\"a}t f{\"u}r den Umgang mit der eigenen Zeit schaffen — denn sie ist am Ende das Wertvollste, das bleibt.},
  language  = {de}
}
@inproceedings{KohlFreyerKraemeretal.2023,
  author    = {Kohl, Philipp and Freyer, Nils and Kr{\"a}mer, Yoka and Werth, Henri and Wolf, Steffen and Kraft, Bodo and Meinecke, Matthias and Z{\"u}ndorf, Albert},
  title     = {ALE: a simulation-based active learning evaluation framework for the parameter-driven comparison of query strategies for NLP},
  series = {Deep Learning Theory and Applications},
  booktitle = {Deep Learning Theory and Applications},
  editor    = {Conte, Donatello and Fred, Ana and Gusikhin, Oleg and Sansone, Carlo},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-031-39058-6 (Print)},
  doi       = {10.1007/978-3-031-39059-3_16},
  pages     = {235 -- 253},
  year      = {2023},
  abstract  = {Supervised machine learning and deep learning require a large amount of labeled data, which data scientists obtain in a manual, and time-consuming annotation process. To mitigate this challenge, Active Learning (AL) proposes promising data points to annotators they annotate next instead of a subsequent or random sample. This method is supposed to save annotation effort while maintaining model performance. However, practitioners face many AL strategies for different tasks and need an empirical basis to choose between them. Surveys categorize AL strategies into taxonomies without performance indications. Presentations of novel AL strategies compare the performance to a small subset of strategies. Our contribution addresses the empirical basis by introducing a reproducible active learning evaluation (ALE) framework for the comparative evaluation of AL strategies in NLP. The framework allows the implementation of AL strategies with low effort and a fair data-driven comparison through defining and tracking experiment parameters (e.g., initial dataset size, number of data points per query step, and the budget). ALE helps practitioners to make more informed decisions, and researchers can focus on developing new, effective AL strategies and deriving best practices for specific use cases. With best practices, practitioners can lower their annotation costs. We present a case study to illustrate how to use the framework.},
  language  = {en}
}
@masterthesis{Kouchev2023,
  type      = {Bachelor Thesis},
  author    = {Kouchev, Veronique},
  title     = {Shiba Moments : 2D Adventure Story Game},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {79 Seiten},
  year      = {2023},
  abstract  = {Shiba Moments ist ein 2D-Top-Down-Abenteuer Story-Spiel {\"u}ber die Wertsch{\"a}tzung der Zeit, die wir mit unseren Haustieren verbringen. Als Hundebesitzerin Conny wandert der / die Spieler:in durch eine Shiba-Traumwelt, die vergangene Momente mit ihrem Hund assoziieren und sich mit eigenen seltsamen Tr{\"a}umen vermischen. Die Spieler:innen erwartet eine Geschichte voller Emotionen, dunklem Humor und verr{\"u}ckter Ereignisse!},
  language  = {de}
}
@article{KowalewskiBragardHueningetal.2023,
  author    = {Kowalewski, Paul and Bragard, Michael and H{\"u}ning, Felix and De Doncker, Rik W.},
  title     = {An inexpensive Wiegand-sensor-based rotary encoder without rotating magnets for use in electrical drives},
  series = {IEEE Transactions on Instrumentation and Measurement},
  volume    = {72},
  journal   = {IEEE Transactions on Instrumentation and Measurement},
  publisher = {IEEE},
  address   = {New York},
  issn      = {0018-9456 (Print)},
  doi       = {10.1109/TIM.2023.3326166},
  pages     = {10 Seiten},
  year      = {2023},
  abstract  = {This paper introduces an inexpensive Wiegand-sensor-based rotary encoder that avoids rotating magnets and is suitable for electrical-drive applications. So far, Wiegand-sensor-based encoders usually include a magnetic pole wheel with rotating permanent magnets. These encoders combine the disadvantages of an increased magnet demand and a limited maximal speed due to the centripetal force acting on the rotating magnets. The proposed approach reduces the total demand of permanent magnets drastically. Moreover, the rotating part is manufacturable from a single piece of steel, which makes it very robust and cheap. This work presents the theoretical operating principle of the proposed approach and validates its benefits on a hardware prototype. The presented proof-of-concept prototype achieves a mechanical resolution of 4.5 ° by using only 4 permanent magnets, 2Wiegand sensors and a rotating steel gear wheel with 20 teeth.},
  language  = {en}
}
@masterthesis{Kremer2023,
  type      = {Bachelor Thesis},
  author    = {Kremer, Laura},
  title     = {LittleHabit : die richtige K{\"o}rperhaltung zur Gewohnheit machen},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {119 Seiten},
  year      = {2023},
  abstract  = {Der heutige Alltag vieler Menschen ist durch l{\"a}ngere Sitz-Einheiten gekennzeichnet, w{\"a}hrend die k{\"o}rperliche Bewegung vernachl{\"a}ssigt wird. Diese Entwicklung kann einen negativen Einfluss auf die Haltung von Personen und ihre Gesundheit haben. In diesem Fall ist eine korrekte Haltung nicht nur f{\"u}r die k{\"o}rperliche, sondern auch f{\"u}r die psychische Gesundheit von großer Relevanz. Die Bachelorarbeit „LittleHabit" erm{\"o}glicht es, dass bei Kindern die Bewegung nach langen Sitz-Einheiten durch gezieltes Training zur Gewohnheit wird. Hierbei wird zwischen dem Zuhause- und dem Schulbereich differenziert. Zu Hause soll das Kind beim Erledigen der Hausaufgaben durch Animationen und Lichtsignale dazu motiviert werden, Bewegungspausen einzulegen. In der Schule soll dieses Vorhaben in reduzierter Form aufgegriffen und mithilfe von Licht- und Farbsignalen umgesetzt werden. Dar{\"u}ber hinaus f{\"o}rdert es die intrinsische Motivation, sodass Kinder aus eigenem Antrieb ein Interesse daf{\"u}r entwickeln, sich nach langen Sitz-Einheiten zu bewegen. LittleHabit setzt einen Baustein f{\"u}r die Entwicklung einer gesunden Sitz-Haltung und zielt darauf ab, Haltungsschw{\"a}chen zu verhindern.},
  language  = {de}
}
@masterthesis{Kreutz2023,
  type      = {Bachelor Thesis},
  author    = {Kreutz, Delayne Sara},
  title     = {Auf links gedreht : eine informative Auseinandersetzung mit der Benachteiligung durch Linksh{\"a}ndigkeit},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {138 Seiten},
  year      = {2023},
  abstract  = {Unsere Welt funktioniert seit jeher v{\"o}llig rechtsorientiert. Rechtsh{\"a}ndigkeit stellt die Norm dar, w{\"a}hrend Linksh{\"a}ndigkeit eine Besonderheit ist - ein Ph{\"a}nomen, oder gar eine Kuriosit{\"a}t, welche im Laufe der Menschheitsgeschichte bei Weitem nicht so akzeptiert wurde wie in der Gegenwart. Das Buch „Auf links gedreht" thematisiert die Wahrnehmung der linken Seite in der Vergangenheit und sensibilisiert f{\"u}r die Probleme von Linksh{\"a}nder:innen in der heutigen Zeit. Ein Buch, fernab der Norm, mit einer Gestaltung ausgelegt auf die Linksh{\"a}ndigkeit. Es f{\"u}hrt Rechtsh{\"a}nder:innen die Problematik vor Augen. So wird sich nicht nur inhaltlich f{\"u}r eine h{\"a}ndigkeitsneutrale Gestaltung eingesetzt. Ein Buch {\"u}ber die linke Hand, gestaltet f{\"u}r die linke Hand.},
  language  = {de}
}
@masterthesis{KruegerStupp2023,
  type      = {Bachelor Thesis},
  author    = {Kr{\"u}ger, Niklas and Stupp, Anna-Lena},
  title     = {Raubgut : Zusammenf{\"u}hrung der in Deutschland befindlichen Objekte aus dem ehemaligen K{\"o}nigreich Benin},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {83 Seiten},
  year      = {2023},
  abstract  = {Die Benin-Objekte wurden vor 126 Jahren durch britische Kolonialm{\"a}chte aus ihrer Heimat geraubt. Sie wurden {\"u}ber die ganze Welt verstreut und ca. 1500 St{\"u}cke landeten auch in deutschen Museen. Bei den Objekten handelt es sich um das kulturelle Erbe und das Nationalarchiv eines Volkes. In „Raubgut" finden die Leser:innen eine Zusammenf{\"u}hrung aller Objekte, die sich in deutschen Museen befinden. „Raubgut" ist das Ergebnis einer umfangreichen Recherche, in der die erste Zusammenf{\"u}hrung auf bildlicher Ebene in einem Bildarchiv, auf textlicher Ebene u. a. in einer einzigartigen Inventarliste sowie in Texten zum ehemaligen K{\"o}nigreich, dem Kolonialismus und weiteren Themen gegeben ist. Nach all den Jahren wurde am 01. Juli 2022 die vollst{\"a}ndige Eigentums{\"u}bertragung an Nigeria beschlossen. Ob das nun der Grundstein f{\"u}r die Entwicklung der Restitutionsdebatte war, wird sich in Zukunft zeigen.},
  language  = {de}
}
@article{KuchlerGuenthnerRibeiroetal.2023,
  author    = {Kuchler, Timon and G{\"u}nthner, Roman and Ribeiro, Andrea and Hausinger, Renate and Streese, Lukas and W{\"o}hnl, Anna and Kesseler, Veronika and Negele, Johanna and Assali, Tarek and Carbajo-Lozoya, Javier and Lech, Maciej and Adorjan, Kristina and Stubbe, Hans Christian and Hanssen, Henner and Kotliar, Konstantin and Haller, Berhard and Heemann, Uwe and Schmaderer, Christoph},
  title     = {Persistent endothelial dysfunction in post-COVID-19 syndrome and its associations with symptom severity and chronic inflammation},
  volume    = {26},
  publisher = {Springer Nature},
  address   = {Dordrecht},
  doi       = {10.1007/s10456-023-09885-6},
  pages     = {547 -- 563},
  year      = {2023},
  abstract  = {Background Post-COVID-19 syndrome (PCS) is a lingering disease with ongoing symptoms such as fatigue and cognitive impairment resulting in a high impact on the daily life of patients. Understanding the pathophysiology of PCS is a public health priority, as it still poses a diagnostic and treatment challenge for physicians. Methods In this prospective observational cohort study, we analyzed the retinal microcirculation using Retinal Vessel Analysis (RVA) in a cohort of patients with PCS and compared it to an age- and gender-matched healthy cohort (n = 41, matched out of n = 204). Measurements and main results PCS patients exhibit persistent endothelial dysfunction (ED), as indicated by significantly lower venular flicker-induced dilation (vFID; 3.42\% ± 1.77\% vs. 4.64\% ± 2.59\%; p = 0.02), narrower central retinal artery equivalent (CRAE; 178.1 [167.5-190.2] vs. 189.1 [179.4-197.2], p = 0.01) and lower arteriolar-venular ratio (AVR; (0.84 [0.8-0.9] vs. 0.88 [0.8-0.9], p = 0.007). When combining AVR and vFID, predicted scores reached good ability to discriminate groups (area under the curve: 0.75). Higher PCS severity scores correlated with lower AVR (R = - 0.37 p = 0.017). The association of microvascular changes with PCS severity were amplified in PCS patients exhibiting higher levels of inflammatory parameters. Conclusion Our results demonstrate that prolonged endothelial dysfunction is a hallmark of PCS, and impairments of the microcirculation seem to explain ongoing symptoms in patients. As potential therapies for PCS emerge, RVA parameters may become relevant as clinical biomarkers for diagnosis and therapy management.},
  language  = {en}
}
@masterthesis{Kuck2023,
  type      = {Bachelor Thesis},
  author    = {Kuck, Fabian},
  title     = {Commuter Zone : R{\"u}ckzugsort f{\"u}r Pendelnde zum Ausgleich ihrer Reisezeit},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {103 Seiten},
  year      = {2023},
  abstract  = {Die „Commuter Zone" setzt sich mit dem Zeitverlust Pendelnder auseinander. Berufliche Ziele treiben immer mehr Menschen an, l{\"a}ngere Strecken zur{\"u}ckzulegen. Dabei b{\"u}ßen sie den Zeitaufwand an privater Stelle ein. Als R{\"u}ckzugsort f{\"u}r Alleinreisende schafft die „Commuter Zone" ein effektiv nutzbares Zeitfenster. Dazu wird die R{\"u}cksichtnahme der Routinierten zueinander genutzt und gef{\"o}rdert. Sitz- und Arbeitsfl{\"a}chen lassen sich zur{\"u}ckklappen und erleichtern das Aussteigen. Der begrenzte Raum wird intensiv genutzt. So entsteht Komfort durch die Zuversicht, einen Sitzplatz zu erhalten. Und dank der Zusammensetzung der Sitzkonstellation bleibt das Arbeitsgeschehen privat. Letztlich bietet die „Commuter Zone" den zunehmend selbstbestimmenden Besch{\"a}ftigten neue M{\"o}glichkeiten zur Arbeitseinteilung und schafft Qualit{\"a}tszeit im Privaten.},
  language  = {de}
}
@incollection{Kurz2023,
  author    = {Kurz, Melanie},
  title     = {Waffen und milit{\"a}rische Ausr{\"u}stung in Systemspielzeugwelten},
  series = {Design f{\"u}r Spiel, Spaß, Spannung: Gestaltung von Artefakten zum spielerischen Handeln / herausgegeben von Melanie Kurz und Thilo Schwer},
  booktitle = {Design f{\"u}r Spiel, Spaß, Spannung: Gestaltung von Artefakten zum spielerischen Handeln / herausgegeben von Melanie Kurz und Thilo Schwer},
  publisher = {avedition},
  address   = {Stuttgart},
  isbn      = {978-3-89986-396-3},
  pages     = {104 -- 121},
  year      = {2023},
  language  = {de}
}
@book{KurzSchwer2023,
  author    = {Kurz, Melanie and Schwer, Thilo},
  title     = {Design f{\"u}r Spiel, Spaß, Spannung: Gestaltung von Artefakten zum spielerischen Handeln / herausgegeben von Melanie Kurz und Thilo Schwer},
  series = {Schriften / Gesellschaft f{\"u}r Designgeschichte},
  journal   = {Schriften / Gesellschaft f{\"u}r Designgeschichte},
  edition   = {1. Auflage},
  publisher = {avedition},
  address   = {Stuttgart},
  isbn      = {978-3-89986-396-3},
  pages     = {171 Seiten},
  year      = {2023},
  abstract  = {Die kulturgeschichtlichen Stationen des Spielens vom Beginn der Industrialisierung bis zur Jahrtausendwende werden sowohl aus dem Blickwinkel der Designgeschichte als auch aus dem der Game Studies betrachtet. Die Bandbreite der Themen reicht von der Bauhaus-Wurfpuppe bis zur Barbie, vom Japonismus bis zur Pixelgrafik, von der grafischen Raumillusion zu 3D-Umgebungen und Interaktionsgestaltung, vom Brettspiel bis zum Kriegsspielzeug, von den Utopien der beginnenden Neuzeit bis zu merkantilen Absichten digitaler Spielkonzepte.},
  language  = {de}
}
@inproceedings{KueppersSchubaNeugebaueretal.2023,
  author    = {K{\"u}ppers, Malte and Schuba, Marko and Neugebauer, Georg and H{\"o}ner, Tim and Hack, Sacha},
  title     = {Security analysis of the KNX smart building protocol},
  series = {ARES '23: Proceedings of the 18th International Conference on Availability, Reliability and Security},
  booktitle = {ARES '23: Proceedings of the 18th International Conference on Availability, Reliability and Security},
  publisher = {ACM},
  doi       = {10.1145/3600160.3605167},
  pages     = {1 -- 7},
  year      = {2023},
  abstract  = {KNX is a protocol for smart building automation, e.g., for automated heating, air conditioning, or lighting. This paper analyses and evaluates state-of-the-art KNX devices from manufacturers Merten, Gira and Siemens with respect to security. On the one hand, it is investigated if publicly known vulnerabilities like insecure storage of passwords in software, unencrypted communication, or denialof-service attacks, can be reproduced in new devices. On the other hand, the security is analyzed in general, leading to the discovery of a previously unknown and high risk vulnerability related to so-called BCU (authentication) keys.},
  language  = {en}
}
@incollection{Laack2023,
  author    = {Laack, Walter van},
  title     = {Nahtoderfahrungen, Sterben und Tod aus der Perspektive von Medizin, Naturwissenschaften und Philosophie},
  series = {Thanatologie im deutschsprachigen Raum - Interdisziplin{\"a}re Perspektiven},
  booktitle = {Thanatologie im deutschsprachigen Raum - Interdisziplin{\"a}re Perspektiven},
  editor    = {Ortmanns, Bruno and Brauers, Angelika},
  publisher = {Rediroma-Verlag},
  isbn      = {978-3-98527-661-5},
  pages     = {129 -- 139},
  year      = {2023},
  language  = {de}
}
@article{LaarmannThomaMischetal.2023,
  author    = {Laarmann, Lukas and Thoma, Andreas and Misch, Philipp and R{\"o}th, Thilo and Braun, Carsten and Watkins, Simon and Fard, Mohammad},
  title     = {Automotive safety approach for future eVTOL vehicles},
  series = {CEAS Aeronautical Journal},
  journal   = {CEAS Aeronautical Journal},
  publisher = {Springer Nature},
  issn      = {1869-5590 (Online)},
  doi       = {10.1007/s13272-023-00655-0},
  pages     = {11 Seiten},
  year      = {2023},
  abstract  = {The eVTOL industry is a rapidly growing mass market expected to start in 2024. eVTOL compete, caused by their predicted missions, with ground-based transportation modes, including mainly passenger cars. Therefore, the automotive and classical aircraft design process is reviewed and compared to highlight advantages for eVTOL development. A special focus is on ergonomic comfort and safety. The need for further investigation of eVTOL's crashworthiness is outlined by, first, specifying the relevance of passive safety via accident statistics and customer perception analysis; second, comparing the current state of regulation and certification; and third, discussing the advantages of integral safety and applying the automotive safety approach for eVTOL development. Integral safety links active and passive safety, while the automotive safety approach means implementing standardized mandatory full-vehicle crash tests for future eVTOL. Subsequently, possible crash impact conditions are analyzed, and three full-vehicle crash load cases are presented.},
  language  = {en}
}
@inproceedings{LahrsKrisamHerrmann2023,
  author    = {Lahrs, Lennart and Krisam, Pierre and Herrmann, Ulf},
  title     = {Envisioning a collaborative energy system planning platform for the energy transition at the district level},
  series = {ECOS 2023. The 36th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems},
  booktitle = {ECOS 2023. The 36th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems},
  publisher = {Procedings of ECOS 2023},
  doi       = {10.52202/069564-0284},
  pages     = {3163 -- 3170},
  year      = {2023},
  abstract  = {Residential and commercial buildings account for more than one-third of global energy-related greenhouse gas emissions. Integrated multi-energy systems at the district level are a promising way to reduce greenhouse gas emissions by exploiting economies of scale and synergies between energy sources. Planning district energy systems comes with many challenges in an ever-changing environment. Computational modelling established itself as the state-of-the-art method for district energy system planning. Unfortunately, it is still cumbersome to combine standalone models to generate insights that surpass their original purpose. Ideally, planning processes could be solved by using modular tools that easily incorporate the variety of competing and complementing computational models. Our contribution is a vision for a collaborative development and application platform for multi-energy system planning tools at the district level. We present challenges of district energy system planning identified in the literature and evaluate whether this platform can help to overcome these challenges. Further, we propose a toolkit that represents the core technical elements of the platform. Lastly, we discuss community management and its relevance for the success of projects with collaboration and knowledge sharing at their core.},
  language  = {en}
}
@masterthesis{Laschet2023,
  type      = {Bachelor Thesis},
  author    = {Laschet, Kimberly},
  title     = {Berufsbegleitende Bildungsplattform f{\"u}r Designer : Lebenslanges Lernen f{\"u}r alle.},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {159 Seiten},
  year      = {2023},
  abstract  = {Academia ist eine berufsbegleitende Bildungsplattform f{\"u}r Designer:innen. Die Mission der Plattform ist es, Designer:innen w{\"a}hrend ihres kreativen Ausbildungsweges und auch lange nach ihrem Berufseinstieg zu begleiten und zu unterst{\"u}tzen. Durch Videokurse, Online-Lehrveranstaltungen, etwa Gruppenseminare, Design Talks und Challenges sollen Nutzer:innen passend auf ihre Interessen und ihrem Niveau entsprechend gef{\"o}rdert werden. Academias Fokus liegt auf eine nachhaltige Weiterentwicklung der F{\"a}higkeiten und der fachlichen Expertise.},
  language  = {de}
}
@book{Lauth2023,
  author    = {Lauth, Jakob},
  title     = {Physical chemistry in a nutshell: Basics for engineers and scientists},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-662-67636-3 (Softcover)},
  doi       = {10.1007/978-3-662-67637-0},
  pages     = {XIII, 248 Seiten},
  year      = {2023},
  abstract  = {This book is based on a multimedia course for biological and chemical engineers, which is designed to trigger students' curiosity and initiative. A solid basic knowledge of thermodynamics and kinetics is necessary for understanding many technical, chemical, and biological processes. The one-semester basic lecture course was divided into 12 workshops (chapters). Each chapter covers a practically relevant area of physical chemistry and contains the following didactic elements that make this book particularly exciting and understandable: - Links to Videos at the start of each chapter as preparation for the workshop - Key terms (in bold) for further research of your own - Comprehension questions and calculation exercises with solutions as learning checks - Key illustrations as simple, easy-to-replicate blackboard pictures Humorous cartoons for each workshop (by Faelis) additionally lighten up the text and facilitate the learning process as a mnemonic. To round out the book, the appendix includes a summary of the most popular experiments in basic physical chemistry courses, as well as suggestions for designing workshops with exhibits, experiments, and "questions of the day." Suitable for students minoring in chemistry; chemistry majors are sure to find this slimmed-down, didactically valuable book helpful as well. The book is excellent for self-study.},
  language  = {en}
}
@masterthesis{Leiwen2023,
  type      = {Bachelor Thesis},
  author    = {Leiwen, Sophie},
  title     = {Steinreich : Mineralien des Siegerlands},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {69 Seiten},
  year      = {2023},
  abstract  = {Der Aufbau und die Entstehung unseres Planeten sind untrennbar mit der Bildung von Gesteinen verbunden - diese setzen sich aus verschiedenen Mineralien zusammen. Sie sind in der Natur weit verbreitet und spielen eine entscheidende Rolle in unserem t{\"a}glichen Leben. Obwohl vielen Menschen der Nutzen von Bodensch{\"a}tzen bewusst ist, besteht ein geringes Wissen {\"u}ber deren Vorkommen und Relevanz. F{\"u}r die wirtschaftliche Entwicklung des Siegerlandes beispielsweise waren der Abbau und der Handel mit Mineralien von großer Bedeutung. Insbesondere der langj{\"a}hrige Abbau von Eisenerz legte den Grundstein f{\"u}r die gesamte Metallindustrie der Region. Die Publikation visualisiert eine umfangreiche Sammlung Siegerl{\"a}nder Mineralien und vermittelt ein grundlegendes Verst{\"a}ndnis von Mineralien.},
  language  = {de}
}
@masterthesis{Lessmann2023,
  type      = {Bachelor Thesis},
  author    = {Leßmann, Mika},
  title     = {Designing confidence : eine patient:innenzentrierte Intervention f{\"u}r belastende Behandlungssituationen - am Beispiel von Strahlentherapie},
  publisher = {FH Aachen},
  address   = {Aachen},
  school      = {Fachhochschule Aachen},
  pages     = {193 Seiten},
  year      = {2023},
  abstract  = {Krebstherapie bei Kindern ist f{\"u}r alle Beteiligten eine emotional bedr{\"u}ckende Angelegenheit. Besonders die Strahlentherapie stellt Kinder aufgrund der H{\"a}ufigkeit der Termine, der Isolation w{\"a}hrend der Bestrahlung und der Fixierung vor Herausforderungen. „nia" erm{\"o}glicht es den Angeh{\"o}rigen, w{\"a}hrend der Behandlung einen physischen Kontakt zum Kind zu halten. Zwei miteinander verbundene Zwillingsger{\"a}te registrieren die Bewegungen der H{\"a}nde und {\"u}bertragen die Ber{\"u}hrung an das jeweils andere Ger{\"a}t. Diese taktile Kommunikation sorgt f{\"u}r innere Ruhe und Verbundenheit. Vor der eigentlichen Therapie liegen die Ger{\"a}te in einem Koffer, welcher ein Modell des Behandlungsraums beinhaltet. Mithilfe dessen werden die Kinder spielerisch auf die Bestrahlung vorbereitet. So sollen sich in Zukunft weniger Kinder {\"a}ngstlich und allein einer Strahlentherapie stellen m{\"u}ssen.},
  language  = {de}
}
@article{LiphardtFernandezGonzaloAlbrachtetal.2023,
  author    = {Liphardt, Anna-Maria and Fernandez-Gonzalo, Rodrigo and Albracht, Kirsten and Rittweger, J{\"o}rn and Vico, Laurence},
  title     = {Musculoskeletal research in human space flight - unmet needs for the success of crewed deep space exploration},
  series = {npj Microgravity},
  volume    = {9},
  journal   = {npj Microgravity},
  number    = {Article number: 9},
  publisher = {Springer Nature},
  issn      = {2373-8065},
  doi       = {10.1038/s41526-023-00258-3},
  pages     = {1 -- 9},
  year      = {2023},
  abstract  = {Based on the European Space Agency (ESA) Science in Space Environment (SciSpacE) community White Paper "Human Physiology - Musculoskeletal system", this perspective highlights unmet needs and suggests new avenues for future studies in musculoskeletal research to enable crewed exploration missions. The musculoskeletal system is essential for sustaining physical function and energy metabolism, and the maintenance of health during exploration missions, and consequently mission success, will be tightly linked to musculoskeletal function. Data collection from current space missions from pre-, during-, and post-flight periods would provide important information to understand and ultimately offset musculoskeletal alterations during long-term spaceflight. In addition, understanding the kinetics of the different components of the musculoskeletal system in parallel with a detailed description of the molecular mechanisms driving these alterations appears to be the best approach to address potential musculoskeletal problems that future exploratory-mission crew will face. These research efforts should be accompanied by technical advances in molecular and phenotypic monitoring tools to provide in-flight real-time feedback.},
  language  = {en}
}
@misc{LippoldtRingbeckHuening2023,
  author    = {Lippoldt, Mario and Ringbeck, Thorsten and H{\"u}ning, Felix},
  title     = {Verfahren und System zur Erkennung von unerlaubten Fahrzeug-{\"U}berholvorg{\"a}ngen in einer {\"U}berholverbotszone eines Fahrwegs},
  year      = {2023},
  language  = {de}
}
@masterthesis{Lorse2023,
  type      = {Bachelor Thesis},
  author    = {Lorse, Hannah},
  title     = {Gem{\"u}sevolle Aussichten : eine bunte Sammlung essbarer Pflanzenteile},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {92 Seiten},
  year      = {2023},
  abstract  = {Die Bachelorarbeit „Gem{\"u}sevolle Aussichten" / „Eine bunte Sammlung essbarer Pflanzenteile" umfasst eine illustrative Auseinandersetzung, bunte Sammlung essbarer Pflanzenteile (Gem{\"u}se). Mit ihr entsteht ein visueller Anreiz, sich mehr mit dem gesunden Nahrungsmittel auseinanderzusetzen. Viele Kinder sowie Erwachsene kennen viele Gem{\"u}sesorten {\"u}berhaupt nicht, Gem{\"u}se wie z. B. Schwarzwurzeln, Pastinaken oder gar Fenchel ist oftmals wenig bekannt. Mit der Arbeit wird ein informeller, illustrativer {\"U}berblick {\"u}ber Gem{\"u}se geschaffen, um zum Beispiel auch {\"u}ber die Inhaltsstoffe zu informieren. Denn viele wissen gar nicht, was eigentlich in dem wertvollen Nahrungsmitteln steckt, wie gut ein regelm{\"a}ßiger Konsum von Gem{\"u}se eigentlich f{\"u}r uns ist. Dabei hat der t{\"a}gliche Konsum von verschiedenen Gem{\"u}sesorten nicht nur eine Auswirkung auf die k{\"o}rperliche sondern auch auf die mentale Gesundheit. Viele Gem{\"u}sesorten beinhalten bestimmte Vitamine oder weitere Inhaltsstoffe, die sich positiv auf unsere Psyche auswirken und dazu beitragen, zum Bespiel einen depressiven Zustand zu verbessern. Auch die Umwelt kann von einem h{\"a}ufigeren Konsum von Gem{\"u}se anstatt Fleisch profitieren. Denn bei der Produktion von Fleisch entsteht viel mehr Kohlenstoffdioxid als bei der Produktion von Gem{\"u}se. Auch der Anteil des virtuellen Wassers ist bei der Produktion von Fleisch viel h{\"o}her. Das Projekt besteht aus einem fadengebundenen Hardcover-Buch und einer Poster-Serie. Zu Beginn der Arbeit wird eine allgemeine Einleitung in das Thema Gem{\"u}se gegeben. Im folgenden Hauptteil werden verschiedene Gem{\"u}segruppen und einige der zugeh{\"o}rigen Sorten visuell und informativ erkl{\"a}rt. Bei der Poster-Serie wurden die sechs Hauptfarben, die jeweiligen Gem{\"u}seillustrationen separiert und im Stil der Arbeit nummeriert benannt. Mit dem Projekt soll die Unwissenheit {\"u}ber viele Gem{\"u}sesorten gesenkt und der Konsum von weniger Fleisch und mehr Gem{\"u}se angeregt werden.},
  language  = {de}
}
@article{LuftBremenLuft2023,
  author    = {Luft, Angela and Bremen, Sebastian and Luft, Nils},
  title     = {A cost/benefit and flexibility evaluation framework for additive technologies in strategic factory planning},
  series = {Processes},
  volume    = {11},
  journal   = {Processes},
  number    = {7},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {2227-9717},
  doi       = {10.3390/pr11071968},
  pages     = {Artikel 1968},
  year      = {2023},
  abstract  = {There is a growing demand for more flexibility in manufacturing to counter the volatility and unpredictability of the markets and provide more individualization for customers. However, the design and implementation of flexibility within manufacturing systems are costly and only economically viable if applicable to actual demand fluctuations. To this end, companies are considering additive manufacturing (AM) to make production more flexible. This paper develops a conceptual model for the impact quantification of AM on volume and mix flexibility within production systems in the early stages of the factory-planning process. Together with the model, an application guideline is presented to help planners with the flexibility quantification and the factory design process. Following the development of the model and guideline, a case study is presented to indicate the potential impact additive technologies can have on manufacturing flexibility Within the case study, various scenarios with different production system configurations and production programs are analyzed, and the impact of the additive technologies on volume and mix flexibility is calculated. This work will allow factory planners to determine the potential impacts of AM on manufacturing flexibility in an early planning stage and design their production systems accordingly.},
  language  = {en}
}
@article{LuftLuftArntz2023,
  author    = {Luft, Angela and Luft, Nils and Arntz, Kristian},
  title     = {A basic description logic for service-oriented architecture in factory planning and operational control in the age of industry 4.0},
  series = {Applied Sciences},
  volume    = {2023},
  journal   = {Applied Sciences},
  number    = {13},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {2076-3417},
  doi       = {10.3390/app13137610},
  pages     = {23 Seiten},
  year      = {2023},
  abstract  = {Manufacturing companies across multiple industries face an increasingly dynamic and unpredictable environment. This development can be seen on both the market and supply side. To respond to these challenges, manufacturing companies must implement smart manufacturing systems and become more flexible and agile. The flexibility in operational planning regarding the scheduling and sequencing of customer orders needs to be increased and new structures must be implemented in manufacturing systems' fundamental design as they constitute much of the operational flexibility available. To this end, smart and more flexible solutions for production planning and control (PPC) are developed. However, scheduling or sequencing is often only considered isolated in a predefined stable environment. Moreover, their orientation on the fundamental logic of the existing IT solutions and their applicability in a dynamic environment is limited. This paper presents a conceptual model for a task-based description logic that can be applied to factory planning, technology planning, and operational control. By using service-oriented architectures, the goal is to generate smart manufacturing systems. The logic is designed to allow for easy and automated maintenance. It is compatible with the existing resource and process allocation logic across operational and strategic factory and production planning.},
  language  = {en}
}
@masterthesis{Martinez2023,
  type      = {Bachelor Thesis},
  author    = {Martinez, Mariana},
  title     = {The Taste of Memories : a recipe book of memories},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {110 Seiten},
  year      = {2023},
  abstract  = {What does the word 'home' means and at what age do we give it meaning? Many of us grew up in one, in a home that our parents, grandparents, aunts, uncles and relatives shaped. Who, as we grew up, taught us about the world from their perspective as we interpreted and saw it for the first time and with it, its colors, its smells, its tastes, its sounds, its dances, and its languages. When we migrate, we take all that with us, like a piece of luggage that was stored in some corner inside a lung, or inside the memory in a heart's artery. And then you arrive in this new world, which we were told was the Old World, with other colors, other flavors, other words, in which yours no longer make sense. And you try to connect with all your senses, but, above all, we try to belong, because we belonged all our lives to something, to someone, to some place where we learned to be. When we migrate, without saying, we go through the grieve that comes with the beautiful discomfort of leaving everything we once knew. We mourn, because we can't go to lunch at our grandmas on Sundays, or have mom bring us soup when we are sick, or the Christmas meals and celebrations that we like so much, or that special dish that was made for us on our birthdays or on a family BBQ on a Sunday or a holiday. I wonder if emotions come inside us through the taste and respiratory track, if it is that we breathe life, and with that what we love finds its ways inside and finds its corner somewhere in the body. If what we have loved and what we have lived hides somewhere in our body, I doubtlessly think it came in through one of our senses, and in this attempt at my first illustrated book I'll share which, I think, are the senses through which at first instance part of what we perceive as cultural identity enters.},
  language  = {de}
}
@inproceedings{MaurerMiskiwAcostaetal.2023,
  author    = {Maurer, Florian and Miskiw, Kim K. and Acosta, Rebeca Ramirez and Harder, Nick and Sander, Volker and Lehnhoff, Sebastian},
  title     = {Market abstraction of energy markets and policies - application in an agent-based modeling toolbox},
  series = {EI.A 2023: Energy Informatics},
  booktitle = {EI.A 2023: Energy Informatics},
  editor    = {Jorgensen, Bo Norregaard and Pereira da Silva, Luiz Carlos and Ma, Zheng},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-031-48651-7 (Print)},
  doi       = {10.1007/978-3-031-48652-4_10},
  pages     = {139 -- 157},
  year      = {2023},
  abstract  = {In light of emerging challenges in energy systems, markets are prone to changing dynamics and market design. Simulation models are commonly used to understand the changing dynamics of future electricity markets. However, existing market models were often created with specific use cases in mind, which limits their flexibility and usability. This can impose challenges for using a single model to compare different market designs. This paper introduces a new method of defining market designs for energy market simulations. The proposed concept makes it easy to incorporate different market designs into electricity market models by using relevant parameters derived from analyzing existing simulation tools, morphological categorization and ontologies. These parameters are then used to derive a market abstraction and integrate it into an agent-based simulation framework, allowing for a unified analysis of diverse market designs. Furthermore, we showcase the usability of integrating new types of long-term contracts and over-the-counter trading. To validate this approach, two case studies are demonstrated: a pay-as-clear market and a pay-as-bid long-term market. These examples demonstrate the capabilities of the proposed framework.},
  language  = {en}
}
@article{MaurerRiekeSchemmetal.2023,
  author    = {Maurer, Florian and Rieke, Christian and Schemm, Ralf and Stollenwerk, Dominik},
  title     = {Analysis of an urban grid with high photovoltaic and e-mobility penetration},
  series = {Energies},
  volume    = {16},
  journal   = {Energies},
  number    = {8},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {1996-1073},
  doi       = {10.3390/en16083380},
  pages     = {18 Seiten},
  year      = {2023},
  abstract  = {This study analyses the expected utilization of an urban distribution grid under high penetration of photovoltaic and e-mobility with charging infrastructure on a residential level. The grid utilization and the corresponding power flow are evaluated, while varying the control strategies and photovoltaic installed capacity in different scenarios. Four scenarios are used to analyze the impact of e-mobility. The individual mobility demand is modelled based on the largest German studies on mobility "Mobilit{\"a}t in Deutschland", which is carried out every 5 years. To estimate the ramp-up of photovoltaic generation, a potential analysis of the roof surfaces in the supply area is carried out via an evaluation of an open solar potential study. The photovoltaic feed-in time series is derived individually for each installed system in a resolution of 15 min. The residential consumption is estimated using historical smart meter data, which are collected in London between 2012 and 2014. For a realistic charging demand, each residential household decides daily on the state of charge if their vehicle requires to be charged. The resulting charging time series depends on the underlying behavior scenario. Market prices and mobility demand are therefore used as scenario input parameters for a utility function based on the current state of charge to model individual behavior. The aggregated electricity demand is the starting point of the power flow calculation. The evaluation is carried out for an urban region with approximately 3100 residents. The analysis shows that increased penetration of photovoltaics combined with a flexible and adaptive charging strategy can maximize PV usage and reduce the need for congestion-related intervention by the grid operator by reducing the amount of kWh charged from the grid by 30\% which reduces the average price of a charged kWh by 35\% to 14 ct/kWh from 21.8 ct/kWh without PV optimization. The resulting grid congestions are managed by implementing an intelligent price or control signal. The analysis took place using data from a real German grid with 10 subgrids. The entire software can be adapted for the analysis of different distribution grids and is publicly available as an open-source software library on GitHub.},
  language  = {en}
}
@masterthesis{Merkel2023,
  type      = {Bachelor Thesis},
  author    = {Merkel, Tobias},
  title     = {Unterst{\"u}tzung f{\"u}r Familien : barrierearme Inanspruchnahme von Sozialleistungen f{\"u}r Familien und Kinder},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {199 Seiten},
  year      = {2023},
  abstract  = {Familienbezogene Sozialleistungen sind wichtige Bestandteile eines Sozialstaats: Nicht nur helfen sie Kindern und Familien bei der Bew{\"a}ltigung ihres Alltags, vielmehr sichern sie ein ̈w{\"u}rdevolles Zusammenleben, gleichen in Teilen soziale Unterschiede aus und korrigieren ungleiche Startchancen. Chancengleichheit ist kein triviales Thema: Eine Gesellschaft, die auf sozialen Grundpfeilern aufbaut, muss st{\"a}ndig die Umsetzung dieses eigenen Anspruchs bewerten. Finanzielle Mittel, die deswegen angeboten werden, sind nur dann wirksam, wenn sie Betroffene erreichen. 
Die Nicht-Inanspruchnahme von Sozialleistungen ist ein komplexes Problem. Als Ursache wird gemeinhin die Attraktivit{\"a}t der Leistungen genannt. Vielfach sind aber die Kommunikation und die Informationsbeschaffung entscheidende Faktoren, warum Hilfe ungenutzt bleibt. In dem Projekt ist demgem{\"a}ß zu er{\"o}rtern, wie {\"u}ber zeitgem{\"a}ße digitale Instrumente das Angebot und die Leistungen der Familienkasse zug{\"a}nglich, barrierearm und intuitiv gestaltet werden k{\"o}nnen.},
  language  = {de}
}
@masterthesis{Middelkoop2023,
  type      = {Bachelor Thesis},
  author    = {Middelkoop, Jonas},
  title     = {Frieden und Verschw{\"o}rung : ein kritischer Dokumentarfilm {\"u}ber Daniele Ganser},
  publisher = {FH Aachen},
  address   = {Aachen},
  school      = {Fachhochschule Aachen},
  pages     = {40 Seiten},
  year      = {2023},
  abstract  = {Im Umgang mit dem Schweizer Historiker Daniele Ganser l{\"a}sst sich ein ungew{\"o}hnliches Ph{\"a}nomen beobachten. W{\"a}hrend die Vortr{\"a}ge und B{\"u}cher des bekannten Publizisten bei zahlreichen Fans auf großes Interesse stoßen, zeichnen die meisten Medien das Bild eines gef{\"a}hrlichen Verschw{\"o}rungstheoretikers. Schnell wird seine Person zum Symbolbild einer ganzen Gegen{\"o}ffentlichkeit. Ein Dokumentarfilm {\"u}ber Daniele Ganser, seine Kritiker:innen und alternative Medien.},
  language  = {de}
}
@article{MikuckiSchulerDigeletal.2023,
  author    = {Mikucki, Jill Ann and Schuler, C. G. and Digel, Ilya and Kowalski, Julia and Tuttle, M. J. and Chua, Michelle and Davis, R. and Purcell, Alicia and Ghosh, D. and Francke, G. and Feldmann, M. and Espe, C. and Heinen, Dirk and Dachwald, Bernd and Clemens, Joachim and Lyons, W. B. and Tulaczyk, S.},
  title     = {Field-Based planetary protection operations for melt probes: validation of clean access into the blood falls, antarctica, englacial ecosystem},
  series = {Astrobiology},
  volume    = {23},
  journal   = {Astrobiology},
  number    = {11},
  publisher = {Liebert},
  address   = {New York, NY},
  issn      = {1557-8070 (online)},
  doi       = {10.1089/ast.2021.0102},
  pages     = {1165 -- 1178},
  year      = {2023},
  abstract  = {Subglacial environments on Earth offer important analogs to Ocean World targets in our solar system. These unique microbial ecosystems remain understudied due to the challenges of access through thick glacial ice (tens to hundreds of meters). Additionally, sub-ice collections must be conducted in a clean manner to ensure sample integrity for downstream microbiological and geochemical analyses. We describe the field-based cleaning of a melt probe that was used to collect brine samples from within a glacier conduit at Blood Falls, Antarctica, for geomicrobiological studies. We used a thermoelectric melting probe called the IceMole that was designed to be minimally invasive in that the logistical requirements in support of drilling operations were small and the probe could be cleaned, even in a remote field setting, so as to minimize potential contamination. In our study, the exterior bioburden on the IceMole was reduced to levels measured in most clean rooms, and below that of the ice surrounding our sampling target. Potential microbial contaminants were identified during the cleaning process; however, very few were detected in the final englacial sample collected with the IceMole and were present in extremely low abundances (∼0.063\% of 16S rRNA gene amplicon sequences). This cleaning protocol can help minimize contamination when working in remote field locations, support microbiological sampling of terrestrial subglacial environments using melting probes, and help inform planetary protection challenges for Ocean World analog mission concepts.},
  language  = {en}
}
@masterthesis{Mok2023,
  type      = {Bachelor Thesis},
  author    = {Mok, Pia Peixia},
  title     = {Flowcean Qi : a gentle Reminder to take a deep breath.},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {84 Seiten},
  year      = {2023},
  abstract  = {Atmen tut jeder, automatisch. Es wird nicht auf die Ausf{\"u}hrung geachtet. Doch was, wenn nur ein wenig Feinschliff an unserer Atmung bereits Großes f{\"u}r unsere Gesundheit bewirkt? Von etlichen unterschiedlichen Studien wurde bezeugt, dass Atmung und Empfinden eins sind. Das pers{\"o}nliche Empfinden ist unser Portal zur Außenwelt. Die Art wie wir auf {\"a}ußerliche Reize reagieren, wie achtsam wir im Tun und Denken sind, spiegelt unsere Innenwelt und k{\"o}rperliches Wohlbefinden wieder. FLOWCEAN QI dient dazu, Stress- und Angstst{\"o}rungen im Alltagsleben f{\"u}r Berufst{\"a}tige mit hohem Stressfaktor zu reduzieren. Vor allem, um das Gesundheitssystem zu entlasten und die Psyche der Menschen gesund wieder aufzubauen. Sind Berufst{\"a}tige viel gelassener, steigen auch Leistung und Produktivit{\"a}t. Es ist immer wichtig, die Kernursache von Problemen zu finden und zu l{\"o}sen. So k{\"o}nnen auch vielerlei andere auf die Psyche zur{\"u}ckzuf{\"u}hrende Probleme der Gesellschaft gel{\"o}st werden. FLOWCEAN QI agiert durch modernste Technologie aktiv mit dem Nutzer. Die KI-Assistenz gestaltet das Lernen der Atemtechniken spaßiger, was wiederum den Lerneffekt verbessert. Der Beamer wird im Innenbereich platziert und der Tracker begleitet einen unterwegs und zeichnet die Datenanalyse auf. F{\"u}r mehr Datenschutz ist das Armband ein reines offline Produkt. F{\"o}rmlich sollte es dem Nutzer nah sein, naturverbunden, vertrauensw{\"u}rdig und beruhigend wirken. FLOWCEAN QI basiert gestalterisch auf eine antike japanische Philosophie namens „Kintsugi". Nach der japanischen Philosophie Kintsugi werden zerbrochene Teegl{\"a}ser wiederzusammengeklebt statt weggeworfen. Die in Teile getrennten Elemente werden glatt und geschmeidig wieder zusammengef{\"u}gt. Sie formen ein neues Ganzes, dass die Sch{\"o}nheit des Originals meist {\"u}bertrifft. Die {\"A}sthetik hinter „Kintsugi" nennt man „Wabi-Sabi". Es bedeutet, die Sch{\"o}nheit im Verg{\"a}nglichen, Alten oder Fehlerhaften zu verstehen. Die Philosophie dahinter wird metaphorisch auf das Design abgebildet und auf unsere Gesundheit {\"u}bertragen. Statt letztere zu ignorieren, schenken wir ihr unsere volle Aufmerksamkeit. Ziel der Produkte ist, uns stets an sie zu erinnern, sodass wir t{\"a}glich an unserem Wohlbefinden arbeiten k{\"o}nnen.},
  language  = {de}
}
@incollection{MoorkampPetersonUibel2023,
  author    = {Moorkamp, Wilfried and Peterson, Leif Arne and Uibel, Thomas},
  title     = {Standardholzbr{\"u}cken f{\"u}r kommunale Geh- und Radwege},
  series = {Strukturen, Formen und Prinzipien : Festschrift zum 60. Geburtstag von Univ.-Prof. Dr.-Ing. Martin Trautz},
  booktitle = {Strukturen, Formen und Prinzipien : Festschrift zum 60. Geburtstag von Univ.-Prof. Dr.-Ing. Martin Trautz},
  editor    = {Wehren, Cedric},
  publisher = {RWTH Aachen},
  address   = {Aachen},
  isbn      = {978-3-95886-500-6},
  pages     = {140 -- 165},
  year      = {2023},
  language  = {de}
}
@article{MoraisSumanSchoeningetal.2023,
  author    = {Morais, Paulo V. and Suman, Pedro H. and Sch{\"o}ning, Michael Josef and Siqueira Junior, Jos{\´e} R. and Orlandi, Marcelo O.},
  title     = {Layer-by-layer film based on Sn₃O₄ nanobelts as sensing units to detect heavy metals using a capacitive field-effect sensor platform},
  series = {Chemosensors},
  volume    = {11},
  journal   = {Chemosensors},
  number    = {8},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {2227-9040},
  doi       = {10.3390/chemosensors11080436},
  pages     = {Artikel 436},
  year      = {2023},
  abstract  = {Lead and nickel, as heavy metals, are still used in industrial processes, and are classified as "environmental health hazards" due to their toxicity and polluting potential. The detection of heavy metals can prevent environmental pollution at toxic levels that are critical to human health. In this sense, the electrolyte-insulator-semiconductor (EIS) field-effect sensor is an attractive sensing platform concerning the fabrication of reusable and robust sensors to detect such substances. This study is aimed to fabricate a sensing unit on an EIS device based on Sn₃O₄ nanobelts embedded in a polyelectrolyte matrix of polyvinylpyrrolidone (PVP) and polyacrylic acid (PAA) using the layer-by-layer (LbL) technique. The EIS-Sn₃O₄ sensor exhibited enhanced electrochemical performance for detecting Pb²⁺ and Ni²⁺ ions, revealing a higher affinity for Pb²⁺ ions, with sensitivities of ca. 25.8 mV/decade and 2.4 mV/decade, respectively. Such results indicate that Sn₃O₄ nanobelts can contemplate a feasible proof-of-concept capacitive field-effect sensor for heavy metal detection, envisaging other future studies focusing on environmental monitoring.},
  language  = {en}
}
@article{MuesgenanntKoersMcNeilRadchenkoetal.2023,
  author    = {Mues genannt Koers, Lucas and McNeil, S. W. and Radchenko, V. and Paulßen, Elisabeth and Hoehr, Cornelia},
  title     = {Production of Co-58m in a siphon-style liquid target on a medical cyclotron},
  volume    = {195},
  number    = {Art. 110734},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0969-8043},
  doi       = {10.1016/j.apradiso.2023.110734},
  year      = {2023},
  abstract  = {We present the production of 58mCo on a small, 13 MeV medical cyclotron utilizing a siphon style liquid target system. Different concentrated iron(III)-nitrate solutions of natural isotopic distribution were irradiated at varying initial pressures and subsequently separated by solid phase extraction chromatography. The radio cobalt (58m/gCo and 56Co) was successfully produced with saturation activities of (0.35 ± 0.03) MBq μA-1 for 58mCo with a separation recovery of (75 ± 2) \% of cobalt after one separation step utilizing LN-resin.},
  language  = {en}
}
@article{MuesgenanntKoersPrevostPaulssenetal.2023,
  author    = {Mues genannt Koers, Lucas and Prevost, David and Paulßen, Elisabeth and Hoehr, Cornelia},
  title     = {Density reduction effects on the production of [11C]CO2 in Nb-body targets on a medical cyclotron},
  volume    = {199},
  number    = {Art. 110911},
  publisher = {Elsevier},
  address   = {Amsterdam},
  doi       = {10.1016/j.apradiso.2023.110911},
  year      = {2023},
  abstract  = {Medical isotope production of 11C is commonly performed in gaseous targets. The power deposition of the proton beam during the irradiation decreases the target density due to thermodynamic mixing and can cause an increase of penetration depth and divergence of the proton beam. In order to investigate the difference how the target-body length influences the operation conditions and the production yield, a 12 cm and a 22 cm Nb-target body containing N2/O2 gas were irradiated using a 13 MeV proton cyclotron. It was found that the density reduction has a large influence on the pressure rise during irradiation and the achievable radioactive yield. The saturation activity of [11C]CO2 for the long target (0.083 Ci/μA) is about 10\% higher than in the short target geometry (0.075 Ci/μA).},
  language  = {en}
}
@inproceedings{MulsowHuelsenGuetzlaffetal.2023,
  author    = {Mulsow, Niklas A. and H{\"u}lsen, Benjamin and G{\"u}tzlaff, Joel and Spies, Leon and Bresser, Andreas and Dabrowski, Adam and Czupalla, Markus and Kirchner, Frank},
  title     = {Concept and design of an autonomous micro rover for long term lunar exploration},
  series = {Proceedings of the 74th International Astronautical Congress},
  booktitle = {Proceedings of the 74th International Astronautical Congress},
  publisher = {dfki},
  address   = {Saarbr{\"u}cken},
  pages     = {13 Seiten},
  year      = {2023},
  abstract  = {Research on robotic lunar exploration has seen a broad revival, especially since the Google Lunar X-Prize increasingly brought private endeavors into play. This development is supported by national agencies with the aim of enabling long-term lunar infrastructure for in-situ operations and the establishment of a moon village. One challenge for effective exploration missions is developing a compact and lightweight robotic rover to reduce launch costs and open the possibility for secondary payload options. Existing micro rovers for exploration missions are clearly limited by their design for one day of sunlight and their low level of autonomy. For expanding the potential mission applications and range of use, an extension of lifetime could be reached by surviving the lunar night and providing a higher level of autonomy. To address this objective, the paper presents a system design concept for a lightweight micro rover with long-term mission duration capabilities, derived from a multi-day lunar mission scenario at equatorial regions. Technical solution approaches are described, analyzed, and evaluated, with emphasis put on the harmonization of hardware selection due to a strictly limited budget in dimensions and power.},
  language  = {en}
}
@article{MoehrenBergmannJanseretal.2023,
  author    = {M{\"o}hren, Felix and Bergmann, Ole and Janser, Frank and Braun, Carsten},
  title     = {On the influence of elasticity on propeller performance: a parametric study},
  series = {CEAS Aeronautical Journal},
  volume    = {14},
  journal   = {CEAS Aeronautical Journal},
  publisher = {Springer Nature},
  address   = {Berlin},
  issn      = {1869-5590 (Online)},
  doi       = {10.1007/s13272-023-00649-y},
  pages     = {311 -- 323},
  year      = {2023},
  abstract  = {The aerodynamic performance of propellers strongly depends on their geometry and, consequently, on aeroelastic deformations. Knowledge of the extent of the impact is crucial for overall aircraft performance. An integrated simulation environment for steady aeroelastic propeller simulations is presented. The simulation environment is applied to determine the impact of elastic deformations on the aerodynamic propeller performance. The aerodynamic module includes a blade element momentum approach to calculate aerodynamic loads. The structural module is based on finite beam elements, according to Timoshenko theory, including moderate deflections. Several fixed-pitch propellers with thin-walled cross sections made of both isotropic and non-isotropic materials are investigated. The essential parameters are varied: diameter, disc loading, sweep, material, rotational, and flight velocity. The relative change of thrust between rigid and elastic blades quantifies the impact of propeller elasticity. Swept propellers of large diameters or low disc loadings can decrease the thrust significantly. High flight velocities and low material stiffness amplify this tendency. Performance calculations without consideration of propeller elasticity can lead to decreased efficiency. To avoid cost- and time-intense redesigns, propeller elasticity should be considered for swept planforms and low disc loadings.},
  language  = {en}
}
@inproceedings{MoehrenBergmannJanseretal.2023,
  author    = {M{\"o}hren, Felix and Bergmann, Ole and Janser, Frank and Braun, Carsten},
  title     = {On the determination of harmonic propeller loads},
  series = {AIAA SCITECH 2023 Forum},
  booktitle = {AIAA SCITECH 2023 Forum},
  publisher = {AIAA},
  doi       = {10.2514/6.2023-2404},
  pages     = {12 Seiten},
  year      = {2023},
  abstract  = {Dynamic loads significantly impact the structural design of propeller blades due to fatigue and static strength. Since propellers are elastic structures, deformations and aerodynamic loads are coupled. In the past, propeller manufacturers established procedures to determine unsteady aerodynamic loads and the structural response with analytical steady-state calculations. According to the approach, aeroelastic coupling primarily consists of torsional deformations. They neglect bending deformations, deformation velocities, and inertia terms. This paper validates the assumptions above for a General Aviation propeller and a lift propeller for urban air mobility or large cargo drones. Fully coupled reduced-order simulations determine the dynamic loads in the time domain. A quasi-steady blade element momentum approach transfers loads to one-dimensional finite beam elements. The simulation results are in relatively good agreement with the analytical method for the General Aviation propeller but show increasing errors for the slender lift propeller. The analytical approach is modified to consider the induced velocities. Still, inertia and velocity proportional terms play a significant role for the lift propeller due to increased elasticity. The assumption that only torsional deformations significantly impact the dynamic loads of propellers is not valid. Adequate determination of dynamic loads of such designs requires coupled aeroelastic simulations or advanced analytical procedures.},
  language  = {en}
}
@masterthesis{Nahrings2023,
  type      = {Bachelor Thesis},
  author    = {Nahrings, Laura Aileen},
  title     = {Seamless Connection : die Integration eines smarten WLAN Routers in die Wohnumgebung},
  publisher = {FH Aachen},
  address   = {Aachen},
  school      = {Fachhochschule Aachen},
  pages     = {131 Seiten},
  year      = {2023},
  abstract  = {In Deutschland verf{\"u}gen mehr als 95 \% aller Haushalte {\"u}ber einen Internetzugang und das Interesse an Smart Home Anwendungen steigt. Je vernetzter das Zuhause wird, desto mehr Devices m{\"u}ssen dort ihren Platz finden. WLAN Router wirken durch ihre technische Designsprache meist wie Fremdk{\"o}rper im Raum, sodass oft versucht wird, sie zu verstecken. Das soll sich mit „Cobo", dem smarten WLAN Router, {\"a}ndern. Neben der Bereitstellung einer Internetanbindung wird er zum Hub f{\"u}r alle Smart Home Anwendungen. Als Herzst{\"u}ck des Zuhauses sorgt er f{\"u}r die Vernetzung aller Devices und schafft zudem eine Verbindung zwischen Technologie und Interior. Mit seinem minimalistischen Design und der gezielten Auswahl an Materialien und Farben f{\"u}gt sich der intelligente Router in die eigenen vier W{\"a}nde ein. „Cobo" ist kein WLAN Router, der im Schuhregal versteckt werden muss, denn er wird zum Teil der Einrichtung.},
  language  = {de}
}
@masterthesis{Namakiravesh2023,
  type      = {Bachelor Thesis},
  author    = {Namakiravesh, Ehsan},
  title     = {Coup{\´e} Nr. 13},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {25 Seiten},
  year      = {2023},
  abstract  = {Coup{\´e} Nr. 13 ist eine kurze Animation {\"u}ber ein Zugcoup{\´e} mit 6 individuellen Passagieren und den 5 Stufen der Kommunikationsentwicklung zwischen ihnen. Die Passagiere des "Coup{\´e} Nummer 13" werden zu ihrem wahren Ich, wenn sie sich gegenseitig die Kofferklappen {\"o}ffnen. Doch dieses Offen-Sein ist gar nicht so einfach. Es f{\"u}hlt sich anfangs verletzlich an, psychologisch nackt und meist {\"a}ngstlich. Aber diese Verletzlichkeit ist aus psychologischer Sicht der Schl{\"u}ssel zu engen Beziehungen. Wahre Verbundenheit entsteht nur, wenn man den Weg zur Schattenseite des anderen findet - indem man sie so sieht und annimmt, wie sie wirklich sind. In der Tat bewundern und respektieren wir meistens die Verletzlichkeit anderer Menschen. Wir sehen sie in der Regel als ein Zeichen von St{\"a}rke und Mut - nicht von Schw{\"a}che.},
  language  = {de}
}
@inproceedings{NethSchubaBrodkorbetal.2023,
  author    = {Neth, Jannik and Schuba, Marko and Brodkorb, Karsten and Neugebauer, Georg and H{\"o}ner, Tim and Hack, Sacha},
  title     = {Digital forensics triage app for android},
  series = {ARES '23: Proceedings of the 18th International Conference on Availability, Reliability and Security},
  booktitle = {ARES '23: Proceedings of the 18th International Conference on Availability, Reliability and Security},
  publisher = {ACM},
  isbn      = {9798400707728},
  doi       = {10.1145/3600160.3605017},
  pages     = {6 Seiten},
  year      = {2023},
  abstract  = {Digital forensics of smartphones is of utmost importance in many criminal cases. As modern smartphones store chats, photos, videos etc. that can be relevant for investigations and as they can have storage capacities of hundreds of gigabytes, they are a primary target for forensic investigators. However, it is exactly this large amount of data that is causing problems: extracting and examining the data from multiple phones seized in the context of a case is taking more and more time. This bears the risk of wasting a lot of time with irrelevant phones while there is not enough time left to analyze a phone which is worth examination. Forensic triage can help in this case: Such a triage is a preselection step based on a subset of data and is performed before fully extracting all the data from the smartphone. Triage can accelerate subsequent investigations and is especially useful in cases where time is essential. The aim of this paper is to determine which and how much data from an Android smartphone can be made directly accessible to the forensic investigator - without tedious investigations. For this purpose, an app has been developed that can be used with extremely limited storage of data in the handset and which outputs the extracted data immediately to the forensic workstation in a human- and machine-readable format.},
  language  = {en}
}
@article{NiedermeierPennerUsherovichetal.2023,
  author    = {Niedermeier, Jana and Penner, Crystal and Usherovich, Samuel and B{\´e}langer-Champagne, Camille and Paulßen, Elisabeth and Hoehr, Cornelia},
  title     = {Optical Fibers as Dosimeter Detectors for Mixed Proton/Neutron Fields - A Biological Dosimeter},
  series = {electronics},
  volume    = {12},
  journal   = {electronics},
  number    = {2},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {2079-9292},
  doi       = {10.3390/electronics12020324},
  pages     = {11 Seiten},
  year      = {2023},
  abstract  = {In recent years, proton therapy has gained importance as a cancer treatment modality due to its conformality with the tumor and the sparing of healthy tissue. However, in the interaction of the protons with the beam line elements and patient tissues, potentially harmful secondary neutrons are always generated. To ensure that this neutron dose is as low as possible, treatment plans could be created to also account for and minimize the neutron dose. To monitor such a treatment plan, a compact, easy to use, and inexpensive dosimeter must be developed that not only measures the physical dose, but which can also distinguish between proton and neutron contributions. To that end, plastic optical fibers with scintillation materials (Gd₂O₂S:Tb, Gd₂O₂S:Eu, and YVO₄:Eu) were irradiated with protons and neutrons. It was confirmed that sensors with different scintillation materials have different sensitivities to protons and neutrons. A combination of these three scintillators can be used to build a detector array to create a biological dosimeter.},
  language  = {en}
}
@inproceedings{NierlePieper2023,
  author    = {Nierle, Elisabeth and Pieper, Martin},
  title     = {Measuring social impacts in engineering education to improve sustainability skills},
  series = {European Society for Engineering Education (SEFI)},
  booktitle = {European Society for Engineering Education (SEFI)},
  doi       = {10.21427/QPR4-0T22},
  pages     = {9 Seiten},
  year      = {2023},
  abstract  = {In times of social climate protection movements, such as Fridays for Future, the priorities of society, industry and higher education are currently changing. The consideration of sustainability challenges is increasing. In the context of sustainable development, social skills are crucial to achieving the United Nations Sustainable Development Goals (SDGs). In particular, the impact that educational activities have on people, communities and society is therefore coming to the fore. Research has shown that people with high levels of social competence are better able to manage stressful situations, maintain positive relationships and communicate effectively. They are also associated with better academic performance and career success. However, especially in engineering programs, the social pillar is underrepresented compared to the environmental and economic pillars. In response to these changes, higher education institutions should be more aware of their social impact - from individual forms of teaching to entire modules and degree programs. To specifically determine the potential for improvement and derive resulting change for further development, we present an initial framework for social impact measurement by transferring already established approaches from the business sector to the education sector. To demonstrate the applicability, we measure the key competencies taught in undergraduate engineering programs in Germany. The aim is to prepare the students for success in the modern world of work and their future contribution to sustainable development. Additionally, the university can include the results in its sustainability report. Our method can be applied to different teaching methods and enables their comparison.},
  language  = {en}
}
@inproceedings{NikolovskiLimpertNessauetal.2023,
  author    = {Nikolovski, Gjorgji and Limpert, Nicolas and Nessau, Hendrik and Reke, Michael and Ferrein, Alexander},
  title     = {Model-predictive control with parallelised optimisation for the navigation of autonomous mining vehicles},
  series = {2023 IEEE Intelligent Vehicles Symposium (IV)},
  booktitle = {2023 IEEE Intelligent Vehicles Symposium (IV)},
  publisher = {IEEE},
  isbn      = {979-8-3503-4691-6 (Online)},
  doi       = {10.1109/IV55152.2023.10186806},
  pages     = {6 Seiten},
  year      = {2023},
  abstract  = {The work in modern open-pit and underground mines requires the transportation of large amounts of resources between fixed points. The navigation to these fixed points is a repetitive task that can be automated. The challenge in automating the navigation of vehicles commonly used in mines is the systemic properties of such vehicles. Many mining vehicles, such as the one we have used in the research for this paper, use steering systems with an articulated joint bending the vehicle's drive axis to change its course and a hydraulic drive system to actuate axial drive components or the movements of tippers if available. To address the difficulties of controlling such a vehicle, we present a model-predictive approach for controlling the vehicle. While the control optimisation based on a parallel error minimisation of the predicted state has already been established in the past, we provide insight into the design and implementation of an MPC for an articulated mining vehicle and show the results of real-world experiments in an open-pit mine environment.},
  language  = {en}
}
@article{OhrtmannGolland2023,
  author    = {Ohrtmann, Jan-Peter and Golland, Alexander},
  title     = {Datenschutz \& Datenrecht - ein Ausblick auf 2023: Nationale Entwicklungen, EuGH-Vorlagen \& Aufsicht},
  series = {DSB Datenschutz-Berater},
  volume    = {2023},
  journal   = {DSB Datenschutz-Berater},
  number    = {3},
  publisher = {DFV Mediengruppe},
  address   = {Frankfurt a.M.},
  pages     = {73 -- 75},
  year      = {2023},
  abstract  = {Die Verfasser vermitteln einen {\"U}berblick {\"u}ber die nationalen Gesetzgebungsverfahren und wesentliche EuGH-Vorlagefragen betreffend den Datenschutz und das Datenrecht f{\"u}r das Jahr 2023. Zun{\"a}chst folgen u.a. Hinweise in Bezug auf den Hinweisgeberschutz, die Verabschiedung der Einwilligungsverwaltungs-Verordnung zur Konkretisierung des \S 26 TTDSG und das Mobilit{\"a}tsdatengesetz. Anschließend werden Vorlagefragen deutscher Gerichte, die dem EuGH vorgelegt und bereits am 12.01.2023 beantwortet wurden, wie etwa C-154/21 und C-132/21 und die EuGH-Entscheidung vom 9.2.2023 (C-453/21), thematisiert. {\"U}berdies f{\"u}hren die Autoren wesentliche Entscheidungen des EuGH an, die im Jahr 2023 aus dem Bereich Datenrecht und Datenschutz zu erwarten seien. Auch Aktivit{\"a}ten der Datenschutzaufsicht auf nationaler und europ{\"a}ischer Ebene finden Erw{\"a}hnung. Die Verfasser machen abschließend auf besonders interessante Entscheidungen, die 2023 erwartet werden, wie etwa das EuGH-Urteil zum Auskunftsanspruch, sowie auf das Verh{\"a}ltnis des der Whistleblowing-RL umzusetzende Hinweisgeberschutzgesetz einerseits und Vorgaben des Datenschutzes andererseits, aufmerksam. Sie empfehlen, die k{\"u}nftige Rechtsprechung des EuGH im Blick zu behalten.},
  language  = {de}
}
@article{OhrtmannGolland2023,
  author    = {Ohrtmann, Jan-Peter and Golland, Alexander},
  title     = {Datenschutz \& Datenrecht - ein Ausblick auf 2023: Gesetzgebungsverfahren auf EU-Ebene},
  series = {DSB Datenschutz-Berater},
  volume    = {2023},
  journal   = {DSB Datenschutz-Berater},
  number    = {2},
  publisher = {Fachmedien Recht und Wirtschaft},
  address   = {Frankfurt am Main},
  pages     = {43 -- 46},
  year      = {2023},
  abstract  = {Die Verfasser stellen in ihrem Beitrag die k{\"u}nftig in Kraft tretenden oder schon in Kraft getretenen Gesetzesvorhaben der europ{\"a}ischen Union vor. Vorab werde auf die abgelaufene Frist zur Anpassung von Standardvertragsklausel hingewiesen. Die Anpassung k{\"o}nne ggf. durch den Data Privacy Act der Kommission bewirkt werden, da dieser eine Angemessenheit suggeriere. Neben dem Digital Markets Act, der die Wahrung der Diskriminierungsfreiheit den Gatekeeper-Plattformen bez{\"u}glich der Bewerbung von Waren Dritter vorschreibt, sind ebenfalls der Digital Service Act und der Data Governance Act in Kraft getreten und werden k{\"u}nftig wirksam. Letzteres bezweckt den Datenaustausch von nicht-personenbezogenen Daten {\"o}ffentlich-rechtlicher Datens{\"a}tze, wobei anders als bei DSA, der die Verbraucherrechte durchsetzen m{\"o}chte, mangels Verpflichtung die praktische Umsetzung ausbleiben werde. In der Entwurfsphase stecken der Artificial Intelligence Act, der Data Act, sowie der Cyber Resilience Act. Allen drei sei wegen dem weiten Anwendungsspielraum, der Bußgeldandrohung oder der Cyber-Bedrohungslage besondere praktische Relevanz beizumessen. Die Kommission weite durch diese Gesetzesvorhaben ihre Regelungsabsicht auch auf nicht-personenbezogene Daten und dem Datentransfer aus. Im Ergebnis werden die Unternehmen mit mehr Verpflichtungen konfrontiert, zu dessen Umsetzung ein funktionierendes Compliance-Management-System unabdingbar sei.},
  language  = {de}
}
@masterthesis{Oltmanns2023,
  type      = {Bachelor Thesis},
  author    = {Oltmanns, Maireni},
  title     = {Digitale Medien wollen gelernt sein : Kampagne f{\"u}r die "Medienscouts NRW" zur Kompetenzf{\"o}rderung},
  publisher = {FH Aachen},
  address   = {Aachen},
  school      = {Fachhochschule Aachen},
  pages     = {41 Seiten},
  year      = {2023},
  abstract  = {,,Digitale Medien wollen gelernt sein" ist eine Kampagne f{\"u}r das Projekt Medienscouts. Hier werden im ersten Schritt interessierte Sch{\"u}ler:innen an weiterf{\"u}hrenden Schulen zu Medienexpert:innen ausgebildet. Im Zweiten geben sie ihr Wissen an ihre Mitsch{\"u}ler:innen weiter und fungieren in ihren Schulen als gleichaltrige Ansprechpartner:innen bei Fragen oder Problemen. Um weitere Sch{\"u}ler:innen f{\"u}r das Projekt zu werben, konzentriert sich die Kampagne auf eine altersgerechte Social Media-Pr{\"a}senz. Ebenso wie das Projekt gibt auch die Kampagne den teilnehmenden Medienscouts die Freiheit, ihre Erfahrungen und Tipps zu teilen. Hierzu ist ein praktikables Konzept entworfen worden, mit dem die Scouts fortlaufend ihre offiziellen Kan{\"a}le bespielen k{\"o}nnen.},
  language  = {de}
}
@masterthesis{Ostheimer2023,
  type      = {Bachelor Thesis},
  author    = {Ostheimer, Johanna},
  title     = {Somnio : ein aufkl{\"a}rendes Medium zum Thema Schlaf im 21. Jahrhundert},
  publisher = {FH Aachen},
  address   = {Aachen},
  school      = {Fachhochschule Aachen},
  pages     = {126 Seiten},
  year      = {2023},
  abstract  = {Jede Nacht aufs Neue begeben wir uns in einen Zustand {\"a}ußerer Ruhe. Unser Bewusstsein geht dabei ganz oder teilweise verloren, wir reagieren vermindert auf {\"a}ußere Reize, die meisten unserer K{\"o}rperfunktionen sind aufgehoben und am n{\"a}chsten Morgen erinnern wir uns maximal an Bruchteile der letzten Stunden: Wir schlafen. Doch was genau passiert mit uns in dieser Zeit? Welche Vorteile bringt es uns zu schlafen? Welche Bedeutung haben unsere Tr{\"a}ume? Und wieso steigt die Zahl an Menschen, die unter Schlafst{\"o}rungen leiden, rapide an? In 'Somnio' wird diesen und weiteren Fragen auf den Grund gegangen und ein Blick in die Welt des Schlafs geboten. Ziel dieser Publikation ist es, Licht in eine oft noch unbekannte und gleichzeitig unglaubliche Welt zu bringen. Eine Welt, in der jeder von uns im Durchschnitt immerhin ein Drittel seines Lebens verbringt.},
  language  = {de}
}
@masterthesis{Outkina2023,
  type      = {Bachelor Thesis},
  author    = {Outkina, Ioulia},
  title     = {Kassandra : wetterbedingte Extremereignisse werden zunehmend die neue Realit{\"a}t bestimmen},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {253 Seiten},
  year      = {2023},
  abstract  = {Wetterbedingte Extremereignisse nehmen mit dem Klimawandel in vielen Regionen der Welt an Intensit{\"a}t und H{\"a}ufigkeit zu. Immer wieder unterstreichen tragische Krisenvorf{\"a}lle die Notwendigkeit der Aufkl{\"a}rung im Nachgang. Doch ausgerechnet wenn sich Leute {\"u}ber eins der aktuellsten und schwerwiegendsten Themen unserer heutigen Zeit informieren wollen, wird es daf{\"u}r keinen konsistenten Kanal in Deutschland geben. Kassandra bietet die M{\"o}glichkeit, sich verst{\"a}ndlich mit den Ereignissen und Missst{\"a}nden sachlich im Krisenbereich auseinanderzusetzen. Transparenz und Seriosit{\"a}t sind Schwerpunkte im qualitativ hochwertigen Bereich, die dabei von Wichtigkeit sind. Mit den Prinzipien des investigativen Journalismus schafft Kassandra als Onlineformat einen Denkanstoß, wie im Bereich der Krisenkommunikation eine Verbesserung stattfinden kann.},
  language  = {de}
}
@masterthesis{Palm2023,
  type      = {Bachelor Thesis},
  author    = {Palm, Kevin John},
  title     = {Viva sin Aqua : Konzeption einer Kampagne zum virtuellen Wasserbedarf},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {80 Seiten},
  year      = {2023},
  abstract  = {Den aktuellen Zustand unserer Welt positiv zu beeinflussen, ist ein {\"u}bergeordnetes Ziel, welches nur kollektiv als Gesellschaft erreicht werden kann. Das Einsparen von Ressourcen ist ein leichter Weg f{\"u}r jede einzelne Person, um ihren Beitrag f{\"u}r dieses Ziel zu leisten. Doch wie bewegt man die Bev{\"o}lkerung zum Sparen? Und was soll eingespart werden? Die Kampagne "Viva sin Agua" sensibilisiert f{\"u}r die Ressource Wasser und nutzt dabei den {\"o}ffentlichen Raum. Aufgekl{\"a}rt wird {\"u}ber das sogenannte virtuelle Wasser. Dieses f{\"a}llt in teilweise extremen Mengen f{\"u}r die Produktion jeglicher Konsumwaren an. Das Ziel der Kampagne ist das Kennzeichnen dieses Wasserverbrauchs direkt am Produkt {\"u}ber eigene Labels. Dadurch soll ein Bewusstsein f{\"u}r den kritischen Kontext geschaffen und das allgemeine Konsumverhalten nachhaltig ver{\"a}ndert werden.},
  language  = {de}
}