@article{MoehrenBergmannJanseretal.2024, author = {M{\"o}hren, Felix and Bergmann, Ole and Janser, Frank and Braun, Carsten}, title = {Assessment of structural mechanical effects related to torsional deformations of propellers}, series = {CEAS Aeronautical Journal}, journal = {CEAS Aeronautical Journal}, publisher = {Springer}, address = {Wien}, issn = {1869-5590 (eISSN)}, doi = {10.1007/s13272-024-00737-7}, pages = {22 Seiten}, year = {2024}, abstract = {Lifting propellers are of increasing interest for Advanced Air Mobility. All propellers and rotors are initially twisted beams, showing significant extension-twist coupling and centrifugal twisting. Torsional deformations severely impact aerodynamic performance. This paper presents a novel approach to assess different reasons for torsional deformations. A reduced-order model runs large parameter sweeps with algebraic formulations and numerical solution procedures. Generic beams represent three different propeller types for General Aviation, Commercial Aviation, and Advanced Air Mobility. Simulations include solid and hollow cross-sections made of aluminum, steel, and carbon fiber-reinforced polymer. The investigation shows that centrifugal twisting moments depend on both the elastic and initial twist. The determination of the centrifugal twisting moment solely based on the initial twist suffers from errors exceeding 5\% in some cases. The nonlinear parts of the torsional rigidity do not significantly impact the overall torsional rigidity for the investigated propeller types. The extension-twist coupling related to the initial and elastic twist in combination with tension forces significantly impacts the net cross-sectional torsional loads. While the increase in torsional stiffness due to initial twist contributes to the overall stiffness for General and Commercial Aviation propellers, its contribution to the lift propeller's stiffness is limited. The paper closes with the presentation of approximations for each effect identified as significant. Numerical evaluations are necessary to determine each effect for inhomogeneous cross-sections made of anisotropic material.}, language = {en} } @masterthesis{Zeyen2024, type = {Bachelor Thesis}, author = {Zeyen, Kim}, title = {Seeds : Konzeption und Gestaltung eines Toolkits f{\"u}r die Entwicklung nachhaltiger Webdesigns}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {197 Seiten}, year = {2024}, abstract = {Die Menschheit lebt {\"u}ber ihre Verhältnisse: Permanent {\"u}bersteigt unser Verbrauch die uns j{\"a}hrlich zur Verf{\"u}gung stehenden Ressourcen. Der Energiebedarf digitaler Anwendungen wird dabei meist unterschätzt. Wie Interaction-Designer:innen einen Beitrag zur Entwicklung nachhaltiger Websites leisten können, ist aktuell nur durch aufwendige Recherche zu beantworten. Die Bachelorarbeit »Seeds« stellt einen Schritt im Prozess zu mehr Nachhaltigkeit dar. Sie umfasst ein Toolkit, bestehend aus einer Website und einem Plugin f{\"u}r g{\"a}ngige Designtools. Dieses b{\"u}ndelt alle Informationen, um das Internet barriereärmer, sozialer, ethischer und eben auch ökologisch verträglicher zu gestalten. W{\"a}hrend die Website eine Anlaufstelle f{\"u}r den Wissensaufbau darstellt, unterst{\"u}tzt das Plugin bei der Entwicklung eigener Designs, ohne dass Gestalter:innen den Designprozess verlassen m{\"u}ssen.}, language = {de} } @masterthesis{Wiese2024, type = {Bachelor Thesis}, author = {Wiese, Katharina}, title = {Drink me}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {39 Seiten}, year = {2024}, abstract = {„Drink me" ist ein Kurzfilm {\"u}ber drei Freunde auf einer Party, auf der ein mysteri{\"o}ses Getr{\"a}nk verteilt wird, das die Partyg{\"a}ste in einen besonderen Rausch versetzt. Die Farben fangen an zu leuchten, die Musik wird klarer, alles f{\"u}hlt sich intensiver an. Bis sich die Wahrnehmung der Protagonistin Ally pl{\"o}tzlich ver{\"a}ndert: Vom bunt leuchtenden Rauschzustand zur scheinbaren Realit{\"a}t: Einem grauen, kalten Bunker voller abgewrackter Gestalten. Ally versucht die Party zu verlassen, doch w{\"a}hrend ihre Wahrnehmungen immer weiter verschwimmen, verliert sie gleichzeitig allm{\"a}hlich ihr Bewusstsein. Der Film bietet durch die Darstellung der verschiedenen Wahrnehmungszust{\"a}nde und das Verschwimmen derer ein visuell besonders spannendes Erlebnis.}, language = {de} } @article{BornheimGriegerBlanecketal.2024, author = {Bornheim, Tobias and Grieger, Niklas and Blaneck, Patrick Gustav and Bialonski, Stephan}, title = {Speaker Attribution in German Parliamentary Debates with QLoRA-adapted Large Language Models}, series = {Journal for language technology and computational linguistics : JLCL}, volume = {37}, journal = {Journal for language technology and computational linguistics : JLCL}, number = {1}, publisher = {Gesellschaft f{\"u}r Sprachtechnologie und Computerlinguistik}, address = {Regensburg}, issn = {2190-6858}, doi = {10.21248/jlcl.37.2024.244}, pages = {13 Seiten}, year = {2024}, abstract = {The growing body of political texts opens up new opportunities for rich insights into political dynamics and ideologies but also increases the workload for manual analysis. Automated speaker attribution, which detects who said what to whom in a speech event and is closely related to semantic role labeling, is an important processing step for computational text analysis. We study the potential of the large language model family Llama 2 to automate speaker attribution in German parliamentary debates from 2017-2021. We fine-tune Llama 2 with QLoRA, an efficient training strategy, and observe our approach to achieve competitive performance in the GermEval 2023 Shared Task On Speaker Attribution in German News Articles and Parliamentary Debates. Our results shed light on the capabilities of large language models in automating speaker attribution, revealing a promising avenue for computational analysis of political discourse and the development of semantic role labeling systems.}, language = {en} } @article{OezsoyluAliaziziWagneretal.2024, author = {{\"O}zsoylu, Dua and Aliazizi, Fereshteh and Wagner, Patrick and Sch{\"o}ning, Michael Josef}, title = {Template bacteria-free fabrication of surface imprinted polymer-based biosensor for E. coli detection using photolithographic mimics: Hacking bacterial adhesion}, series = {Biosensors and Bioelectronics}, volume = {261}, journal = {Biosensors and Bioelectronics}, publisher = {Elsevier}, address = {Amsterdam}, issn = {1873-4235 (eISSN)}, doi = {10.1016/j.bios.2024.116491}, pages = {11 Seiten}, year = {2024}, abstract = {As one class of molecular imprinted polymers (MIPs), surface imprinted polymer (SIP)-based biosensors show great potential in direct whole-bacteria detection. Micro-contact imprinting, that involves stamping the template bacteria immobilized on a substrate into a pre-polymerized polymer matrix, is the most straightforward and prominent method to obtain SIP-based biosensors. However, the major drawbacks of the method arise from the requirement for fresh template bacteria and often non-reproducible bacteria distribution on the stamp substrate. Herein, we developed a positive master stamp containing photolithographic mimics of the template bacteria (E. coli) enabling reproducible fabrication of biomimetic SIP-based biosensors without the need for the "real" bacteria cells. By using atomic force and scanning electron microscopy imaging techniques, respectively, the E. coli-capturing ability of the SIP samples was tested, and compared with non-imprinted polymer (NIP)-based samples and control SIP samples, in which the cavity geometry does not match with E. coli cells. It was revealed that the presence of the biomimetic E. coli imprints with a specifically designed geometry increases the sensor E. coli-capturing ability by an "imprinting factor" of about 3. These findings show the importance of geometry-guided physical recognition in bacterial detection using SIP-based biosensors. In addition, this imprinting strategy was employed to interdigitated electrodes and QCM (quartz crystal microbalance) chips. E. coli detection performance of the sensors was demonstrated with electrochemical impedance spectroscopy (EIS) and QCM measurements with dissipation monitoring technique (QCM-D).}, language = {en} } @article{ThomaGardiFisheretal.2024, author = {Thoma, Andreas and Gardi, Alessandro and Fisher, Alex and Braun, Carsten}, title = {Improving local path planning for UAV flight in challenging environments by refining cost function weights}, series = {CEAS Aeronautical Journal}, journal = {CEAS Aeronautical Journal}, publisher = {Springer}, address = {Wien}, issn = {1869-5590 (eISSN)}, doi = {10.1007/s13272-024-00741-x}, pages = {12 Seiten}, year = {2024}, abstract = {Unmanned Aerial Vehicles (UAV) constantly gain in versatility. However, more reliable path planning algorithms are required until full autonomous UAV operation is possible. This work investigates the algorithm 3DVFH* and analyses its dependency on its cost function weights in 2400 environments. The analysis shows that the 3DVFH* can find a suitable path in every environment. However, a particular type of environment requires a specific choice of cost function weights. For minimal failure, probability interdependencies between the weights of the cost function have to be considered. This dependency reduces the number of control parameters and simplifies the usage of the 3DVFH*. Weights for costs associated with vertical evasion (pitch cost) and vicinity to obstacles (obstacle cost) have the highest influence on the failure probability of the local path planner. Environments with mainly very tall buildings (like large American city centres) require a preference for horizontal avoidance manoeuvres (achieved with high pitch cost weights). In contrast, environments with medium-to-low buildings (like European city centres) benefit from vertical avoidance manoeuvres (achieved with low pitch cost weights). The cost of the vicinity to obstacles also plays an essential role and must be chosen adequately for the environment. Choosing these two weights ideal is sufficient to reduce the failure probability below 10\%.}, language = {en} } @article{HaegerJolmesOyenetal.2024, author = {Haeger, Gerrit and Jolmes, Tristan and Oyen, Sven and Jaeger, Karl-Erich and Bongaerts, Johannes and Sch{\"o}rken, Ulrich and Siegert, Petra}, title = {Novel recombinant aminoacylase from Paraburkholderia monticola capable of N-acyl-amino acid synthesis}, series = {Applied Microbiology and Biotechnology}, journal = {Applied Microbiology and Biotechnology}, number = {108}, publisher = {Springer}, address = {Berlin}, issn = {1432-0614}, doi = {10.1007/s00253-023-12868-8}, pages = {14 Seiten}, year = {2024}, abstract = {N-Acyl-amino acids can act as mild biobased surfactants, which are used, e.g., in baby shampoos. However, their chemical synthesis needs acyl chlorides and does not meet sustainability criteria. Thus, the identification of biocatalysts to develop greener synthesis routes is desirable. We describe a novel aminoacylase from Paraburkholderia monticola DSM 100849 (PmAcy) which was identified, cloned, and evaluated for its N-acyl-amino acid synthesis potential. Soluble protein was obtained by expression in lactose autoinduction medium and co-expression of molecular chaperones GroEL/S. Strep-tag affinity purification enriched the enzyme 16-fold and yielded 15 mg pure enzyme from 100 mL of culture. Biochemical characterization revealed that PmAcy possesses beneficial traits for industrial application like high temperature and pH-stability. A heat activation of PmAcy was observed upon incubation at temperatures up to 80 °C. Hydrolytic activity of PmAcy was detected with several N-acyl-amino acids as substrates and exhibited the highest conversion rate of 773 U/mg with N-lauroyl-L-alanine at 75 °C. The enzyme preferred long-chain acyl-amino-acids and displayed hardly any activity with acetyl-amino acids. PmAcy was also capable of N-acyl-amino acid synthesis with good conversion rates. The best synthesis results were obtained with the cationic L-amino acids L-arginine and L-lysine as well as with L-leucine and L-phenylalanine. Exemplarily, L-phenylalanine was acylated with fatty acids of chain lengths from C8 to C18 with conversion rates of up to 75\%. N-lauroyl-L-phenylalanine was purified by precipitation, and the structure of the reaction product was verified by LC-MS and NMR.}, language = {en} } @article{TixMollKrafftetal.2024, author = {Tix, Julian and Moll, Fabian and Krafft, Simone and Betsch, Matthias and Tippk{\"o}tter, Nils}, title = {Hydrogen production from enzymatic pretreated organic waste with thermotoga neapolitana}, series = {Energies}, volume = {17}, journal = {Energies}, number = {12}, publisher = {MDPI}, address = {Basel}, issn = {1996-1073}, doi = {10.3390/en17122938}, pages = {20 Seiten}, year = {2024}, abstract = {Biomass from various types of organic waste was tested for possible use in hydrogen production. The composition consisted of lignified samples, green waste, and kitchen scraps such as fruit and vegetable peels and leftover food. For this purpose, the enzymatic pretreatment of organic waste with a combination of five different hydrolytic enzymes (cellulase, amylase, glucoamylase, pectinase and xylase) was investigated to determine its ability to produce hydrogen (H2) with the hydrolyzate produced here. In course, the anaerobic rod-shaped bacterium T. neapolitana was used for H2 production. First, the enzymes were investigated using different substrates in preliminary experiments. Subsequently, hydrolyses were carried out using different types of organic waste. In the hydrolysis carried out here for 48 h, an increase in glucose concentration of 481\% was measured for waste loads containing starch, corresponding to a glucose concentration at the end of hydrolysis of 7.5 g·L-1. In the subsequent set fermentation in serum bottles, a H2 yield of 1.26 mmol H2 was obtained in the overhead space when Terrific Broth Medium with glucose and yeast extract (TBGY medium) was used. When hydrolyzed organic waste was used, even a H2 yield of 1.37 mmol could be achieved in the overhead space. In addition, a dedicated reactor system for the anaerobic fermentation of T. neapolitana to produce H2 was developed. The bioreactor developed here can ferment anaerobically with a very low loss of produced gas. Here, after 24 h, a hydrogen concentration of 83\% could be measured in the overhead space.}, language = {en} } @techreport{Drescher2024, type = {Working Paper}, author = {Drescher, Hans Paul}, title = {Critical review of the 1. Stokes' problem and consequences for mixed turbulent/laminar flow}, pages = {27 Seiten}, year = {2024}, abstract = {The "1. Stokes' problem", the "suddenly accelerated flat wall", is the oldest application of the Navier-Stokes equations. Stokes' solution of the "problem" does not comply with the mathematical theorem of Cauchy and Kowalewskaya on the "Uniqueness and Existence" of solutions of partial differential equations and violates the physical theorem of minimum entropy production/dissipation of the Thermodynamics of Irreversible Processes. The result includes very high local shear stresses and dissipation rates. That is of special interest for the theory of turbulent and mixed turbulent/laminar flow. A textbook solution of the "1. Stokes Problem" is the Couette flow, which has a constant sheer stress along a linear profile. A consequence is that the Navier-Stokes equations do not describe any S-shaped part of a turbulent profile found in any turbulent Couette experiment. The paper surveys arguments referring to that statement, concerning the history of >150 years. Contrary to this there is always a Navier-Stokes solution near the wall, observed by a linear part of the Couette profile. There a turbulent description (e.g. by the logarithmic law-of-the-wall) fails completely. That is explained by the minimum dissipation requirement together with the Couette feature τ = const. The local co-existence of a turbulent zone and a laminar zone near the wall is stable and observed also at high Reynolds-Numbers.}, language = {en} } @article{AdelsMonakhova2024, author = {Adels, Klaudia and Monakhova, Yulia}, title = {Low-field NMR spectroscopic study of e-cigarettes: Is determination of only nicotine and organic carrier solvents possible?}, series = {Microchemical Journal}, volume = {203}, journal = {Microchemical Journal}, publisher = {Elsevier}, address = {Amsterdam}, issn = {1095-9149}, doi = {10.1016/j.microc.2024.110859}, pages = {9 Seiten}, year = {2024}, abstract = {Electronic cigarettes (e-cigarettes) have become popular worldwide with the market growing exponentially in some countries. The absence of product standards and safety regulations requires urgent development of analytical methodologies for the holistic control of the growing diversity of such products. An approach based on low-field nuclear magnetic resonance (LF-NMR) at 80 MHz is presented for the simultaneous determination of key parameters: carrier solvents (vegetable glycerine (VG), propylene glycol (PG) and water), total nicotine as well as free-base nicotine fraction. Moreover, qualitative and quantitative determination of fourteen weak organic acids deliberately added to enhance sensory characteristics of e-cigarettes was possible. In most cases these parameters can be rapidly and conveniently determined without using any sample manipulation such as dilution, extraction or derivatization steps. The method was applied for 37 authentic e-cigarettes samples. In particular, eight different organic acids with the content up to 56 mg/mL were detected. Due to its simplicity, the method can be used in routine regulatory control as well as to study release behaviour of nicotine and other e-cigarettes constituents in different products.}, language = {en} } @masterthesis{Darboven2024, type = {Bachelor Thesis}, author = {Darboven, Mona}, title = {Gamifizierte Online-Schulung zur IT-Sicherheit : Konzeption \& Gestaltung verschiedener Ans{\"a}tze}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {140 Seiten}, year = {2024}, abstract = {Das Ziel der webbasierten, gamifizierten Schulung ist die Awareness der IT-Sicherheit f{\"u}r Studierende. Das Verhalten der Studierenden soll nachhaltig ge{\"a}ndert werden, damit zuk{\"u}nftige Cyberangriffe weniger wirksam werden. Im Mittelpunkt steht ein spannendes und motivierendes Konzept auf den Grundlagen des Game Based Learnings, das z. B. mit Interactives arbeitet. Zur St{\"a}rkung des Risiko-Bewusstseins wurde eine Roadmap entwickelt, die wie ein Spielbrett Zusammenh{\"a}nge, aber auch den Fortschritt der Schulung aufzeigt. So entstand zun{\"a}chst in interdisziplin{\"a}rer Zusammenarbeit mit einer Wirtschaftsinformatik-Studentin ein technischer Prototyp. Darauf aufbauend wurden weitere konzeptionelle und visuelle Ans{\"a}tze entwickelt, die das breite Spektrum von Game Based Learning zeigen. Dieses realit{\"a}tsnahe Projekt zeigt zukunftsweisende Lernumgebungen auf.}, language = {de} } @masterthesis{Bonsu2024, type = {Bachelor Thesis}, author = {Bonsu, Joel}, title = {HypnoStress : Implementierung eines Stressmanagement-Controllers f{\"u}r den schulischen Alltag in der Grundschule.}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {145 Seiten}, year = {2024}, abstract = {In der heutigen Welt sind Kinder in zunehmendem Maße Stress aus verschiedenen Quellen wie schulischen Anforderungen, famili{\"a}rem Druck und ungewohnten Situationen ausgesetzt. Dieser Aspekt wird von vielen Erwachsenen oft vernachl{\"a}ssigt. Das kann dazu f{\"u}hren, dass sich bei Kindern Frustration und {\"A}rger aufstauen. Insbesondere das schulische Umfeld stellt ein erhebliches Stresspotenzial dar, da von den Kindern hohe Leistungen erwartet werden. Leistungsdruck, soziale Erwartungen und Frustration tragen zu diesem Eindruck bei. Auch der Unterricht bildet da keine Ausnahme und ist aufgrund seiner zentralen Bedeutung eine potenzielle Stressquelle. Als spezialisierter Begleiter bietet HypnoStress den Kindern die M{\"o}glichkeit, mit hypnosebasierten Techniken die Stressoren des Alltags zu bew{\"a}ltigen und sich auf neue Herausforderungen vorzubereiten.}, language = {de} } @masterthesis{Lambertus2024, type = {Bachelor Thesis}, author = {Lambertus, Jan-Michael}, title = {CardboardCastle}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {60 Seiten}, year = {2024}, abstract = {„CardboardCastle" ist ein 3D-Animationsfilm. Der Film zeigt die lebendig gewordene Welt zweier K{\"o}nigreiche aus Pappe, die in einem Streit um einen magischen Zauberstab verwickelt sind. Das Projekt beweist, dass es m{\"o}glich ist, mit der Software „Blender" einen vollwertigen und hochwertigen 3D-Animationsfilm zu erstellen. Dabei wurden alle Assets bis auf Texturen selbst hergestellt. Die virtuelle Pappe spielt hierbei eine fundamentale Rolle, f{\"u}r diese wurde ein vollkommen neuer Workflow entwickelt, welcher es erm{\"o}glicht, realistische Pappe zu visualisieren. „CardboardCastle" setzt auf eine cinematische Inszenierung von Licht und vereint technisches Wissen mit unterhaltenden Inhalten. Dabei zeigt er die kindliche Vorstellungskraft und l{\"a}dt die Zuschauer ein, sich an ihre eigenen kindlichen Fantasien zu erinnern.}, language = {de} } @masterthesis{Liedtke2024, type = {Bachelor Thesis}, author = {Liedtke, Janna}, title = {Lehrmaterial f{\"u}r den Tiroler Skilehrerverband: Konzeption f{\"u}r eine crossmediale Neugestaltung}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {68 Seiten}, year = {2024}, abstract = {Der Tiroler Skilehrerverband bereitet angehende Skilehrer:innen auf die verschiedenen Schneesportlehrer-Pr{\"u}fungen vor. Skilehrer:innen spielen eine entscheidende Rolle im Erfolg des Wintertourismus, was ihre gesellschaftliche und wirtschaftliche Relevanz unterstreicht. Die zeitgem{\"a}ße Neugestaltung des Lehrmaterials soll eine effektive Vermittlung von Lerninhalten erm{\"o}glichen. Durch die Kombination von Informationsdesign, Corporate Design und Editorial Design wird die Verst{\"a}ndlichkeit und Attraktivit{\"a}t des Materials gesteigert. Die Integration einer Lernapp erm{\"o}glicht eine interaktive und multimediale Lernerfahrung sowie mehr Flexibilit{\"a}t f{\"u}r die Lernenden. Die crossmediale Neugestaltung wirkt den Problemen veralteter Darstellungsformen entgegen. Es wird deutlich, dass gut gestaltetes Lehrmaterial bei gleichbleibenden Inhalten zu einer besseren Lernerfahrung f{\"u}hrt.}, language = {de} } @masterthesis{Tiller2024, type = {Bachelor Thesis}, author = {Tiller, Alicia}, title = {Die G{\"o}ttin in dir : Arbeitsbuch zu den weiblichen Rhythmen}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {123 Seiten}, year = {2024}, abstract = {Was verbindet der Mond, die Jahreszeiten und das Weibliche dieser Erde? Das sich immerfort drehende Rad der Zyklen. In vergangenen Zeiten nutzten Frauen den Menstruationszyklus und die Weisheit der Natur als Quelle der Kraft - f{\"u}r kreative, emotionale, geistige und k{\"o}rperliche F{\"u}hrung durch das Leben. Dieses alte Wissen ist noch heute durch Geschichten und Mythen unserer Welt erfahrbar. Das Arbeitsbuch „Die G{\"o}ttin in dir" begleitet Leser:innen auf diesen Spuren durch die Welten der Zyklen und Rhythmen aus der Kulturhistorie, Biologie und dem indigenen Wissen. Die Ebene der Selbstreflexion in diesem Buch bietet dabei eine aktive Methode, die Nutzer:innen dazu bef{\"a}higt, in die Umsetzung zu gehen und den Prozess der zyklischen Reise der Natur zu begleiten. Das Konzept des Buches zielt darauf ab, eine Verbindung zwischen der Selbsterfahrung im Kontext weiblicher Archetypen, dem Menstruationszyklus, nat{\"u}rlichen Rhythmen und ethnologischen Techniken herzustellen. Die Absicht ist es, die individuelle Erfahrung jeder Frau zu st{\"a}rken, das Selbstvertrauen zu f{\"o}rdern und den Mut zur Vielfalt zu aktivieren. Es geht darum, unsere angeborene, instinktive Natur in uns wieder zu erwecken. Die Stimme der G{\"o}ttin fl{\"u}stert uns zu und ruft ihre T{\"o}chter. Denn die Melodie, die in dir erklingt, m{\"o}chte geh{\"o}rt werden.}, language = {de} } @masterthesis{Schneide2024, type = {Bachelor Thesis}, author = {Schneide, Mirijana}, title = {Grimms Kram : Illustrative Neuinterpretation sieben traditioneller Grimm M{\"a}rchen}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {227 Seiten}, year = {2024}, abstract = {Inhalt dieses Projektes ist die visuelle Neuinterpretation sieben traditioneller Grimm M{\"a}rchen. Der Fokus liegt auf den Illustrationen, welche von den entsprechenden bestehenden Textinhalten separat begleitet werden. Dem gew{\"a}hlten Illustrationsstil „Pixel-Art" liegt die Intention zugrunde, g{\"a}ngige Darstellungsformen des M{\"a}rchen-Genres aufzubrechen: visuell wird sich bewusst auf das beschr{\"a}nkte Aufl{\"o}sungsverm{\"o}gen von Bildschirmen bezogen. Aufgrund des digitalen Illustrierens wird dies als Stilmittel eingesetzt. Die digitale Darstellungsform wird durch den Druckprozess der Medien in den physischen Raum {\"u}bertragen und so erlebbar gemacht.}, language = {de} } @masterthesis{Stein2024, type = {Bachelor Thesis}, author = {Stein, Hannah}, title = {Tr{\"a}ume hoch, klein Dani!}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {120 Seiten}, year = {2024}, abstract = {"Tr{\"a}ume hoch, klein Dani!" ist ein Pappkinderbuch mit Schieb- und Drehfunktionen f{\"u}r Kinder ab 3 Jahren. Diese Bachelorarbeit beinhaltet das Schreiben einer Kindergeschichte, das Gestalten der Illustrationen, das Konzeptionieren der interaktiven Funktionen und das Binden und Bauen des Buches. Gut gestaltete Kinderb{\"u}cher spielen eine entscheidende Rolle bei der Entwicklung von Kindern. Kinderb{\"u}cher f{\"o}rdern die Sprachentwicklung, unterst{\"u}tzen kritisches Denken, lehren wichtige Werte und Moral, beg{\"u}nstigen das Lernen der Grundlagen des Lesens und Schreibens und regen die Kreativit{\"a}t an. Pappb{\"u}cher mit zus{\"a}tzlichen interaktiven Funktionen trainieren die Hand- und Augenkoordination und damit die motorischen F{\"a}higkeiten des Kindes. Ziel war es, ein Pappkinderbuch f{\"u}r junge Kinder zu gestalten, das Jung und Alt begeistert und Spaß bereitet.}, language = {de} } @masterthesis{Terry2024, type = {Bachelor Thesis}, author = {Terry, Aileen}, title = {Deutsche Parkinson Gesellschaft : Entwicklung eines neuen Erscheinungsbildes f{\"u}r die Deutsche Parkinson Gesellschaft zur F{\"o}rderung des Bewusstseins f{\"u}r die Krankheit}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {174 Seiten}, year = {2024}, abstract = {Mehr als 400.000 Menschen in Deutschland sind von Parkinson betroffen, dennoch bleibt diese neurodegenerative Krankheit oft im Schatten anderer Erkrankungen. Diese Bachelorarbeit beleuchtet die Unsichtbarkeit von Parkinson im {\"o}ffentlichen Raum und setzt sich f{\"u}r eine breitere Aufkl{\"a}rung ein. Durch ein neues Corporate Design der Deutschen Parkinson Gesellschaft sowie begleitende Maßnahmen wird angestrebt, Informationen {\"u}ber die Krankheit zu verbreiten und Einblicke in die Lebensumst{\"a}nde der Betroffenen zu gew{\"a}hren. Dies tr{\"a}gt nicht nur zu einer fr{\"u}hzeitigen Diagnosestellung bei, sondern erm{\"o}glicht auch eine verbesserte Unterst{\"u}tzung f{\"u}r Patient:innen und ihre Angeh{\"o}rigen. Ein Aufruf, gemeinsam mit den Betroffenen Vorurteile zu {\"u}berwinden und Parkinson sichtbar zu machen. Mit dem Ziel Parkinson irgendwann heilem zu k{\"o}nnen.}, language = {de} } @masterthesis{Meisenberg2024, type = {Bachelor Thesis}, author = {Meisenberg, Anna}, title = {Biodiversit{\"a}t mittels Urban Gardening : eine interaktive Applikation f{\"u}r Pflanzen- und Insektenschutz}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {112 Seiten}, year = {2024}, abstract = {In den vergangenen Jahrzehnten hat sich der R{\"u}ckgang der biologischen Vielfalt aufgrund menschlicher Aktivit{\"a}ten dramatisch beschleunigt. Die dramatische Abnahme wirkt sich enorm auf unsere allgemeine Nahrungsversorgung und die Gesundheit unseres Planeten aus. Das Ziel von „Bloomi" ist es, den Nutzer {\"u}ber die Wichtigkeit der Biodiversit{\"a}t aufzukl{\"a}ren und zur Schaffung von essenziellen Lebensr{\"a}umen f{\"u}r die Arten anzuregen. Der Fokus liegt dabei auf der Gestaltung und Pflege von insekten-, tier- und pflanzenfreundlichen G{\"a}rten, Balkonen und st{\"a}dtischen Freifl{\"a}chen. „Bloomi" bietet dazu umfassende Informationen und Anleitungen. Außerdem kann der Nutzer nicht nur alleine, sondern auch in der Gemeinschaft g{\"a}rtnern und sich {\"u}ber die Plattform organisieren, austauschen und inspirieren lassen.}, language = {de} } @masterthesis{Platzen2024, type = {Bachelor Thesis}, author = {Platzen, Nicolai}, title = {Blue in Green}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {171 Seiten}, year = {2024}, abstract = {Portr{\"a}ts sind allgegenw{\"a}rtig und begegnen uns t{\"a}glich in den verschiedensten Formen und an den verschiedensten Orten. Sie sind zu einem nicht unbedeutenden Aspekt unseres kulturellen und sozialen Lebens geworden. Die Fotografie verspricht dabei eine unverf{\"a}lschte Wiedergabe der Realit{\"a}t. Das Portr{\"a}t fungiert an vielen Stellen sogar als Stellvertreter der abgebildeten Person. Es entsteht eine gewisse parasoziale Vertrautheit zur Abbildung. Allerdings birgt der Prozess des Portr{\"a}tierens zahlreiche Herausforderungen und Beschr{\"a}nkungen: St{\"o}rfaktoren, technischer sowie psychologischer Natur, beeinflussen die Diskrepanz zwischen einer Person und ihrer Abbildung erheblich. „Blue in Green" ist ein installativer Raum, welcher die Rezipient*innen mit besagten St{\"o}rfaktoren konfrontiert, die Vertrautheit mit der Abbildung bricht und so zu einer Auseinandersetzung mit Portr{\"a}ts aus m{\"o}glichst vielen verschiedenen Perspektiven provoziert.}, language = {de} } @masterthesis{Moskaleva2024, type = {Bachelor Thesis}, author = {Moskaleva, Elizaveta}, title = {Identity : inside a simulation}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {201 Seiten}, year = {2024}, abstract = {Das Bachelorprojekt „Identity, Inside a Simulation" ist eine experimentelle, fotografische Auseinandersetzung mit dem Thema Identit{\"a}t. In einer sich st{\"a}ndig weiter digitalisierenden Welt werden neue Arten der Kommunikation, auch zwischen Mensch und Maschine, erm{\"o}glicht. Diese lassen die Grenzen zwischen Realit{\"a}t und Simulation verschwimmen. In diesem Projekt ist die moderne Frage nach Identit{\"a}t mit dem aktuellen Mittel KI auf neue Darstellungsm{\"o}glichkeiten analysiert worden. Eine Arbeit, die der Frage nachgeht, wie Identit{\"a}t innerhalb einer simulierten Welt verstanden werden kann. Dabei werden Parallelen zu der realen Welt aufgewiesen. Visuell er{\"o}ffnet die Ausstellung eine neue Sichtweise f{\"u}r die Nutzung aktueller Technologien und das Verst{\"a}ndnis von der eigenen Identit{\"a}t.}, language = {de} } @masterthesis{Maden2024, type = {Bachelor Thesis}, author = {Maden, Seda}, title = {Cape Town : revisiting the Past}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {92 Seiten}, year = {2024}, abstract = {Die Arbeit „Cape Town - Revisiting the Past" setzt sich mit der Vergangenheit von Kapstadt auseinander. Kapstadt ist gepr{\"a}gt von einer beeindruckenden Geografie, Kultur, der Vergangenheit und den Menschen. Eine pers{\"o}nliche Verbindung nach Kapstadt und ein Familienarchiv aus aufbewahrten Publikationen, Postkarten und Fotos erm{\"o}glichen einen Blick in die vergangene Zeit. Verschiedene Materialien aus unterschiedlichen Zeiten werden verbunden und in einen gemeinsamen Kontext gebracht. Unabh{\"a}ngig davon, ob dies der erste Kontakt mit Kapstadt ist oder man den Ort bereits kennt, k{\"o}nnen Dinge neu entdeckt oder wiederentdeckt werden. Die Publikation schafft es mithilfe von Materialien und pers{\"o}nlichen Erinnerungen einen visuellen und informativen Einblick in das damalige Kapstadt zu geben. Dabei wird die Vielfalt der Region gezeigt und ein Gef{\"u}hl eines Lebens vor Ort vermittelt.}, language = {de} } @masterthesis{Pilath2024, type = {Bachelor Thesis}, author = {Pilath, Dominik}, title = {Optimierte Schnittmuster in Kleinunternehmen : Konzept zur Branchenverschiebung in der Modeindustrie}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {55 Seiten}, year = {2024}, abstract = {Die vorliegende Arbeit widmet sich Herangehensweisen, die dem Fast-Fashion-Ph{\"a}nomen - einem Trend in der Bekleidungsindustrie, der sich durch immer schnellere Produktion, k{\"u}rzere Produktlebenszyklen und kosteng{\"u}nstigere Massenproduktion auszeichnet, entgegenstehen. Die alternative Herangehensweise orientiert sich am Berufsbild des Maßschneiders. Ein Lasercutter, der f{\"u}r den Arbeitsalltag von Kleinunternehmen in der Kleidungsbranche optimiert ist, {\"u}bernimmt das Ausschneiden von Schnittmustern auf Stoffen. Dies erm{\"o}glicht Unternehmen in der digitalisierten Welt konkurrenzf{\"a}hig zu bleiben, ohne große Aufr{\"u}stungsarbeiten.}, language = {de} } @masterthesis{Spindler2024, type = {Bachelor Thesis}, author = {Spindler, David}, title = {OneHold : mietbares modulares Produktsystem f{\"u}r Haushaltsger{\"a}te bei tempor{\"a}rem Wohnen}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {129 Seiten}, year = {2024}, abstract = {OneHold ist ein kompaktes Produktsystem, welches durch die Nutzung von Modularit{\"a}t Multifunktionalit{\"a}t erreicht, und so Mehrwert bietet, indem es die grundlegenden Aufgaben im Haushalt mit weniger ben{\"o}tigten Komponenten bew{\"a}ltigt. So werden Teile, Raum, Kosten und Ressourcen gespart. OneHold kann in Form von mehreren Modulen flexibel gemietet werden, um die Bed{\"u}rfnisse tempor{\"a}r wohnender Menschen passgenau zu bedienen. Die Power-Einheit mit Elektromotor und Akku wird mit jeweils einem Modul f{\"u}r die zu bew{\"a}ltigende Haushaltsaufgabe verbunden. In dieser Bachelorarbeit wurden neben der Power-Einheit vier Module gestaltet: Staubsauger, Mixer, P{\"u}rierstab, und Akkuschrauber. Das Design von OneHold zelebriert die Achse mit rotierender Funktion als formgebenden Kern des Produkts. Die dynamisch gestreckte zylindrische Form verleiht jeder Modulkonfiguration des Produktsystems ein einheitliches Aussehen.}, language = {de} } @masterthesis{Raabe2024, type = {Bachelor Thesis}, author = {Raabe, Jonas Leander}, title = {caff{\´e} eccezionale for la marzocco : Interiordesign eines Showrooms in K{\"o}ln}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {111 Seiten}, year = {2024}, abstract = {In dem Projekt „caff{\´e} eccezionale for la marzocco" wurde sich mit der Gestaltung eines interaktiven Showrooms f{\"u}r die renommierte Kaffeemaschinenmarke „La Marzocco" auseinandergesetzt. Dieser Showroom befindet sich im Belgischen Viertel in K{\"o}ln und bietet einen einzigartigen Einblick in die Welt des Espressos. Die Zielsetzung: nicht nur die Leidenschaft f{\"u}r Kaffee und sein pr{\"a}zises Handwerk zu teilen, sondern auch auf die dringende Notwendigkeit hinzuweisen, nachhaltige Praktiken im Kaffeeanbau zu f{\"o}rdern. Durch die einzigartige Gestaltung des Showrooms wurde eine Atmosph{\"a}re geschaffen, die Besucher:innen erm{\"o}glicht, die Marke sinnlich zu entdecken und kennenzulernen. Er fungiert nicht nur als Ausstellungsraum f{\"u}r Kaffeemaschinen, sondern auch als Plattform, die die Besuche:innen auf eine interaktive Erlebnisreise durch die Welt des Kaffees f{\"u}hrt.}, language = {de} } @masterthesis{Breuer2024, type = {Bachelor Thesis}, author = {Breuer, Annika}, title = {Climate Engineering : Entwicklung einer digitalen Plattform f{\"u}r Geoengineering-Methoden und Klimawandel-Daten}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {71 Seiten}, year = {2024}, abstract = {Dieses Projekt hat zum Ziel, umfassend {\"u}ber Climate Engineering-Maßnahmen zu informieren und dabei insbesondere ihre Funktionsweise, Kosten und Risiken darzustellen. Die entstandene Plattform "Die Erde abk{\"u}hlen!" bietet einen Einblick in die L{\"o}sungsans{\"a}tze des Climate Engineerings durch die Verwendung von Storytelling. Sie erm{\"o}glicht Nutzer:innen einen {\"U}berblick {\"u}ber den aktuellen Stand der Klimaerw{\"a}rmung sowie den Vergleich von Climate Engineering-Maßnahmen. Ein entwickeltes Bewertungssystem auf Grundlage der "Royal Society" sowie interaktive Infografiken geben Nutzer:innen einen umfassenden Einblick. Das Hauptziel des Projekts ist die digitale Transformation der Climate Engineering-L{\"o}sungsans{\"a}tze. Dabei geht es nicht nur darum, {\"u}ber die Folgen der Klimaerw{\"a}rmung zu informieren, sondern auch konkrete L{\"o}sungen aufzuzeigen. Durch die Entwicklung eines innovativen Storytellings wird die Thematik nicht nur dramaturgisch pr{\"a}sentiert, sondern erm{\"o}glicht es den Nutzer:innen auch, ihre eigene Wissensvertiefung zu steuern.}, language = {de} } @masterthesis{Jansen2024, type = {Bachelor Thesis}, author = {Jansen, Marie}, title = {Budzi Budzi}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {53 Seiten}, year = {2024}, abstract = {Mit {\"u}ber 1300 B{\"u}dchen in 86 Veedeln ist K{\"o}ln Deutschlands Kiosk-Hauptstadt. Sie sind ein pr{\"a}gendes Element von Nachbarschaften und geh{\"o}ren zum K{\"o}lner Stadtbild einfach dazu wie der Dom und der Rhein. Durch Anekdoten, Interviews, Beitr{\"a}ge zur Popkultur, alte Fotografien, Momentaufnahmen und vertraute Grafiken sowie einer festen Formsprache entsteht das erste B{\"u}dchenmagazin f{\"u}r K{\"o}ln. Das Periodikum erscheint alle drei Monate und liegt kostenfrei in den B{\"u}dchen aus. Es ist eine Publikation die beweist, dass B{\"u}dchen mehr als g{\"a}ngige Verkaufsstellen sind, sondern Knotenpunkte unserer Gesellschaft.}, language = {de} } @masterthesis{Pauls2024, type = {Bachelor Thesis}, author = {Pauls, Benjamin}, title = {Energiewende im Stromsektor: Nachhaltigkeit {\"u}ber Umweltschutz hinaus}, school = {Fachhochschule Aachen}, pages = {IV, 88 Seiten}, year = {2024}, abstract = {Die Energiewende wird h{\"a}ufig als „nachhaltig" bezeichnet, das genaue Begriffsverst{\"a}ndnis bleibt jedoch vage. Diese Transformation von fossilen und nuklearen hin zu erneuerbaren Energiequellen steht im Fokus der Treibhausgasneutralit{\"a}t. So soll dem fortschreitenden Klimawandel entgegengetreten werden. Das Thema der vorliegenden Arbeit ist die Definition eines m{\"o}glichen Verst{\"a}ndnisses von „Nachhaltigkeit" in der Energiewende des deutschen Stromsektors. Die leitenden Forschungsfragen lauten: Was kann im Zusammenhang mit der Energiewende im Stromsektor Deutschlands unter Nachhaltigkeit verstanden werden? Inwieweit unterscheidet sich dieses Verst{\"a}ndnis von der bisherigen Herangehensweise? Die Datenbasis zur Beantwortung dieser liefern sechs leitfadengest{\"u}tzte Expert:inneninterviews. Als Analysemethode dient die inhaltliche Strukturierung nach Mayring (2015). Die qualitative Studie hat gezeigt, dass eine nachhaltige Energiewende den Menschen und die Natur zentralisiert. Weiter aufgeschl{\"u}sselt stehen die drei Nachhaltigkeitsdimensionen und die Generationengerechtigkeit. Dabei dient die {\"o}konomische Dimension der sozialen und {\"o}kologischen. Wichtig sind die Inklusion und Beteiligung von Bev{\"o}lkerung, Unternehmen und Politik. Gleichzeitig ist sie Herausforderung und Chance f{\"u}r einen positiven gesellschaftlichen Wandel. Technisch dienen Windenergie- und Photovoltaikanlagen als Energielieferanten und Wasserstoffsysteme als Zwischenspeicher, Stabilit{\"a}tssicherung und zur Kopplung der Sektoren. Damit ist Nachhaltigkeit die Chance, die Energiewende richtig zu gestalten und damit {\"u}ber Klimaneutralit{\"a}t hinauszugehen}, language = {de} } @masterthesis{Erkens2024, type = {Bachelor Thesis}, author = {Erkens, Cedric}, title = {En(Joy)Chroma : Entwicklung einer medien{\"u}bergreifenden Werbekampagne f{\"u}r den Brillenhersteller EnChroma}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {133 Seiten}, year = {2024}, abstract = {Weltweit sind 350 Millionen Menschen von Farbenfehlsichtigkeit betroffen, doch nur wenige wissen, dass es eine L{\"o}sung f{\"u}r genau dieses Problem gibt. Die ausgearbeitete Werbekampagne und neue Markenkommunikation f{\"u}r EnChroma soll genau diese Menschen ermutigen, sich mit ihrer Krankheit auseinanderzusetzen und das breite Konzept der L{\"o}sung zu verstehen. Die speziellen Brillen erm{\"o}glichen es den Menschen, Farben im Alltag und Berufsleben in echt wahrzunehmen und diese besser differenzieren zu k{\"o}nnen. Unsere Welt ist farbcodiert und deshalb ist es besonders wichtig, dass diese Menschen auf das Produkt aufmerksam gemacht werden.}, language = {de} } @masterthesis{Fleischer2024, type = {Bachelor Thesis}, author = {Fleischer, Rebekka}, title = {Bringing brand experience to marketplaces : ein Online-Marktplatz, der Konsument und Marke verbindet}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {101 Seiten}, year = {2024}, abstract = {«Keno» zeigt ein Konzept f{\"u}r einen Online-Marktplatz im Fashion-Segment, mit Fokus auf individueller Beratung, digitaler Anprobe und visueller sowie informativer Pr{\"a}sentation der Marken. Marktpl{\"a}tze werden aufgrund von großer Auswahl und Vertrauensw{\"u}rdigkeit von Konsument:innen bevorzugt aufgesucht. Durch die immersive Darstellung an einem maßgetreuen Avatar und die Einbindung der Marke in das Einkaufserlebnis soll hier die Zahl der Retouren verringert und die Kund:innenzufriedenheit gesteigert werden. Mittels nutzerorientierter Strategien und der Gestaltung eines Designsystems bekam «Keno» seinen Look. Dabei fanden modernste Techniken wie k{\"u}nstliche Intelligenzen und Design Token Systeme Verwendung. Das Projekt zeigt letztendlich M{\"o}glichkeiten auf, wie ein Marktplatz durch Brand Experience, Onlineshopping-Wege verk{\"u}rzen und zu mehr Nachhaltigkeit im E-Commerce beitragen kann.}, language = {de} } @masterthesis{Esser2024, type = {Bachelor Thesis}, author = {Esser, Julius}, title = {Ecosystems : Neuinterpretation von Elementen der Savanne zu Objekten zwischen Kunst und Design.}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {390 Seiten}, year = {2024}, abstract = {Das Projekt „Ecosystems" (deutsch {\"O}kosysteme) beschreibt die zusammenh{\"a}ngende Entwicklung eines Produktsystems, inspiriert von einzelnen Elementen der afrikanischen Savanne. Das {\"O}kosystem und alle damit verbundenen Strukturen werden als Grundlage f{\"u}r die Konzeption der Objekte genutzt und fortlaufend weitgehend abstrahiert. Die Produktkollektion, bestehend aus sechs verschiedenen M{\"o}beln und Objekten, stellt zusammen das {\"O}kosystem der afrikanischen Savanne dar. Elemente der Savanne k{\"o}nnen ganz unterschiedlicher Natur sein. Sowohl die bekannten Tiere, wie die sogenannten Big Five, kleine Savannenbewohner:innen oder unterschiedliche Pflanzen bilden zusammen die Grundlage f{\"u}r das {\"O}kosystem. Jedes Objekt bezieht die Inspiration dabei aus einem anderen Element der Savanne. Die Grundlage der Objekte bildet dabei nicht allein das optische Erscheinungsbild der Tiere und Pflanzen, sondern vielmehr die damit verbundenen Emotionen und Reaktionen.}, language = {de} } @masterthesis{Gros2024, type = {Bachelor Thesis}, author = {Gros, Isabella}, title = {Depressed Furniture : eine abstrakte {\"U}bersetzung von Depressionen in M{\"o}blierung}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {367 Seiten}, year = {2024}, abstract = {Depressed Furniture ist eine abstrakte {\"U}bersetzung von Depressionen in M{\"o}blierung. Es handelt sich um eine Rauminstallation von f{\"u}nf Leuchten, die der Erkrankung in einem un{\"u}blichen Kontext eine Plattform gibt. Dadurch stellt das Projekt eine Schnittstelle zwischen Kunst, Design und Gesellschaft dar. Jede Leuchte verk{\"o}rpert eine Empfindung, mit der sich ein Großteil der Betroffenen identifizieren kann. Es wird Bewusstsein f{\"u}r die Komplexit{\"a}t der Krankheit geschaffen und das Tabu um mentale Krankheiten gebrochen. Neben der Regular Collection k{\"o}nnen auch Tischvarianten (Compact Collection) erworben werden. Depressed Furniture zeigt, dass es durchaus m{\"o}glich ist, eine unsch{\"o}ne Thematik zu abstrahieren und ihr neutral zu begegnen. Es verdeutlicht, wie Design dazu beitragen kann, sensible Themen auf kreative Weise zu kommunizieren.}, language = {de} } @masterthesis{Eichler2024, type = {Bachelor Thesis}, author = {Eichler, Sophie}, title = {Digitales Arztpraxis Management}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {139 Seiten}, year = {2024}, abstract = {Das Ziel der digitalen Arztpraxis-Management-App „PraXma" ist es, die Organisation von Arztpraxen, sowie auch das Patient:innen- und Terminmanagement einer Praxis effizienter und reibungsloser zu gestalten. Da 83 Prozent der Patient:innen bei der Digitalisierung des deutschen Gesundheitswesens Nachholbedarf sehen, besteht ein erheblicher Bedarf an Weiterentwicklung in dieser Branche. „PraXma" gew{\"a}hrleistet Patient:innen mithilfe verschiedener Funktionen einen angenehmeren Arztbesuch. Dazu z{\"a}hlen die patientenorientierte Terminvergabe, der kategorisierte {\"U}berblick {\"u}ber Vitalwerte und P{\"a}sse und die Einsicht in pers{\"o}nliche Dokumente, wie Befunde, Rezepte und mehr. Auch {\"A}rzt:innen profitieren durch „PraXma" von einer Automatisierung ihrer allt{\"a}glichen Abl{\"a}ufe und minimieren so {\"U}berstunden und Stress.}, language = {de} } @masterthesis{Frings2024, type = {Bachelor Thesis}, author = {Frings, Christina}, title = {Unerw{\"u}nscht : Anti-Gestaltung im {\"o}ffentlichen Raum}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {55 Seiten}, year = {2024}, abstract = {»Unerw{\"u}nscht« widmet sich einer Art von architektonischer Gestaltung, die auf t{\"u}ckische Weise als »defensive Architektur« bezeichnet wird. In Form einer Zeitung bietet sie einen umfassenden Einblick in das Thema und gew{\"a}hrt einen vielseitigen Blick in eine Thematik, die im Interesse der Verantwortlichen lieber im Verborgenen geblieben w{\"a}re. Defensive Architektur bezeichnet strategische Baumaßnahmen in der Stadt- und Bauplanung, die darauf abzielen, unerw{\"u}nschte Personengruppen durch unpraktisches oder unbequemes Design von bestimmten Orten fernzuhalten. Diese Maßnahmen richten sich beispielsweise gegen obdachlose Menschen, Jugendliche oder Skateboarder*innen. Die {\"u}berwiegende Mehrheit der Bev{\"o}lkerung ist sich weder der Existenz von solchen architektonischen Maßnahmen noch ihrer Auswirkungen auf das Leben der Betroffenen bewusst. »Unerw{\"u}nscht« zielt darauf ab, diese L{\"u}cke in der {\"o}ffentlichen Wahrnehmung zu schließen.}, language = {de} } @article{DigelAkimbekovRogachevetal.2023, author = {Digel, Ilya and Akimbekov, Nuraly S. and Rogachev, Evgeniy and Pogorelova, Natalia}, title = {Bacterial cellulose produced by Medusomyces gisevii on glucose and sucrose: biosynthesis and structural properties}, series = {Cellulose}, journal = {Cellulose}, publisher = {Springer Science + Business Media}, address = {Dordrecht}, issn = {1572-882X (Online)}, doi = {10.1007/s10570-023-05592-z}, pages = {15 Seiten}, year = {2023}, abstract = {In this work, the effects of carbon sources and culture media on the production and structural properties of bacterial cellulose (BC) synthesized by Medusomyces gisevii have been studied. The culture medium was composed of different initial concentrations of glucose or sucrose dissolved in 0.4\% extract of plain green tea. Parameters of the culture media (titratable acidity, substrate conversion degree etc.) were monitored daily for 20 days of cultivation. The BC pellicles produced on different carbon sources were characterized in terms of biomass yield, crystallinity and morphology by field emission scanning electron microscopy (FE-SEM), atomic force microscopy and X-ray diffraction. Our results showed that Medusomyces gisevii had higher BC yields in media with sugar concentrations close to 10 g L-1 after a 18-20 days incubation period. Glucose in general lead to a higher BC yield (173 g L-1) compared to sucrose (163.5 g L-1). The BC crystallinity degree and surface roughness were higher in the samples synthetized from sucrose. Obtained FE-SEM micrographs show that the BC pellicles synthesized in the sucrose media contained densely packed tangles of cellulose fibrils whereas the BC produced in the glucose media displayed rather linear geometry of the BC fibrils without noticeable aggregates.}, language = {en} } @article{FalkenbergKohnBottetal.2023, author = {Falkenberg, Fabian and Kohn, Sophie and Bott, Michael and Bongaerts, Johannes and Siegert, Petra}, title = {Biochemical characterisation of a novel broad pH spectrum subtilisin from Fictibacillus arsenicus DSM 15822ᵀ}, series = {FEBS Open Bio}, volume = {13}, journal = {FEBS Open Bio}, number = {11}, publisher = {Wiley}, address = {Hoboken, NJ}, issn = {2211-5463}, doi = {10.1002/2211-5463.13701}, pages = {2035 -- 2046}, year = {2023}, abstract = {Subtilisins from microbial sources, especially from the Bacillaceae family, are of particular interest for biotechnological applications and serve the currently growing enzyme market as efficient and novel biocatalysts. Biotechnological applications include use in detergents, cosmetics, leather processing, wastewater treatment and pharmaceuticals. To identify a possible candidate for the enzyme market, here we cloned the gene of the subtilisin SPFA from Fictibacillus arsenicus DSM 15822ᵀ (obtained through a data mining-based search) and expressed it in Bacillus subtilis DB104. After production and purification, the protease showed a molecular mass of 27.57 kDa and a pI of 5.8. SPFA displayed hydrolytic activity at a temperature optimum of 80 °C and a very broad pH optimum between 8.5 and 11.5, with high activity up to pH 12.5. SPFA displayed no NaCl dependence but a high NaCl tolerance, with decreasing activity up to concentrations of 5 m NaCl. The stability enhanced with increasing NaCl concentration. Based on its substrate preference for 10 synthetic peptide 4-nitroanilide substrates with three or four amino acids and its phylogenetic classification, SPFA can be assigned to the subgroup of true subtilisins. Moreover, SPFA exhibited high tolerance to 5\% (w/v) SDS and 5\% H₂O₂ (v/v). The biochemical properties of SPFA, especially its tolerance of remarkably high pH, SDS and H₂O₂, suggest it has potential for biotechnological applications.}, language = {en} } @masterthesis{Oezmen2023, type = {Bachelor Thesis}, author = {{\"O}zmen, Emel}, title = {ALIGN : ein adaptives Regalsystem}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {119 Seiten}, year = {2023}, abstract = {„ALIGN" ist ein smartes M{\"o}belsystem, das den individuellen Lebensstil und die Werte der heutigen Gesellschaft widerspiegelt. Es bietet ausreichend Stauraum und erm{\"o}glicht es, Objekte gezielt in Szene zu setzen oder in den Hintergrund zu r{\"u}cken. Das vielseitige System passt sich an unterschiedliche Raum- und Nutzungsszenarien an. Es erm{\"o}glicht die individuelle Gestaltung des Wohnraums nach pers{\"o}nlichen Vorlieben und hilft, den Herausforderungen des modernen Lebens gerecht zu werden. „ALIGN" - eine passende L{\"o}sung f{\"u}r jedes Problem.}, language = {de} } @article{LuftBremenLuft2023, author = {Luft, Angela and Bremen, Sebastian and Luft, Nils}, title = {A cost/benefit and flexibility evaluation framework for additive technologies in strategic factory planning}, series = {Processes}, volume = {11}, journal = {Processes}, number = {7}, publisher = {MDPI}, address = {Basel}, issn = {2227-9717}, doi = {10.3390/pr11071968}, pages = {Artikel 1968}, year = {2023}, abstract = {There is a growing demand for more flexibility in manufacturing to counter the volatility and unpredictability of the markets and provide more individualization for customers. However, the design and implementation of flexibility within manufacturing systems are costly and only economically viable if applicable to actual demand fluctuations. To this end, companies are considering additive manufacturing (AM) to make production more flexible. This paper develops a conceptual model for the impact quantification of AM on volume and mix flexibility within production systems in the early stages of the factory-planning process. Together with the model, an application guideline is presented to help planners with the flexibility quantification and the factory design process. Following the development of the model and guideline, a case study is presented to indicate the potential impact additive technologies can have on manufacturing flexibility Within the case study, various scenarios with different production system configurations and production programs are analyzed, and the impact of the additive technologies on volume and mix flexibility is calculated. This work will allow factory planners to determine the potential impacts of AM on manufacturing flexibility in an early planning stage and design their production systems accordingly.}, language = {en} } @book{SeptZillingerWiechertetal.2023, author = {Sept, Marcel and Zillinger, Christina and Wiechert, Johanna and Thelen, Marius}, title = {Aachener Online-Schriften Wirtschaft und Recht. Band 6. 01/2023}, editor = {Kroll-Ludwigs, Kathrin and Bassen-Metz, Yasmine and Bernecker, Andreas and Eggert, Mathias and Fritz, Thomas and Golland, Alexander and H{\"o}hne, Tim and Tran, Duc Hung and Vogt, J{\"u}rgen}, publisher = {FH Aachen / Fachbereich Wirtschaftswissenschaften}, address = {Aachen}, publisher = {Fachhochschule Aachen}, pages = {265 Seiten}, year = {2023}, abstract = {Inhaltsverzeichnis - Bachelorarbeiten 1. Zukunft der Rente - Kann eine Erwerbst{\"a}tigenversicherung das demografische Problem nachhaltig l{\"o}sen? - Marcel Sept | Seite 4-73 2. Die versammlungsgebundenen Aktion{\"a}rsrechte in der neuen virtuellen Hauptversammlung - eine Bewertung aus Unternehmer- und Aktion{\"a}rssicht - Christina Zillinger | Seite 74-130 3. Praxisleitfaden f{\"u}r den Arbeitgeber zum gesetzlichen Sonderk{\"u}ndigungsschutz - Was muss der Arbeitgeber tun, um durch Gesetz besonders gesch{\"u}tzten Arbeitnehmern k{\"u}ndigen zu k{\"o}nnen? - Johanna Wiechert | Seite 131-195 4. Die Steuerverg{\"u}nstigung bei Umstrukturierungen im Konzern nach \S 6a GrEStG im Lichte der aktuellen Rechtsprechung - Marius Thelen | Seite 196-265}, language = {de} } @article{HoffstadtCheenakulaNikolauszetal.2023, author = {Hoffstadt, Kevin and Cheenakula, Dheeraja and Nikolausz, Marcell and Krafft, Simone and Harms, Hauke and Kuperjans, Isabel}, title = {Design and construction of a new reactor for flexible biomethanation of hydrogen}, series = {Fermentation}, volume = {9}, journal = {Fermentation}, number = {8}, publisher = {MDPI}, address = {Basel}, issn = {2311-5637}, doi = {10.3390/fermentation9080774}, pages = {1 -- 16}, year = {2023}, abstract = {The increasing share of renewable electricity in the grid drives the need for sufficient storage capacity. Especially for seasonal storage, power-to-gas can be a promising approach. Biologically produced methane from hydrogen produced from surplus electricity can be used to substitute natural gas in the existing infrastructure. Current reactor types are not or are poorly optimized for flexible methanation. Therefore, this work proposes a new reactor type with a plug flow reactor (PFR) design. Simulations in COMSOL Multiphysics ® showed promising properties for operation in laminar flow. An experiment was conducted to support the simulation results and to determine the gas fraction of the novel reactor, which was measured to be 29\%. Based on these simulations and experimental results, the reactor was constructed as a 14 m long, 50 mm diameter tube with a meandering orientation. Data processing was established, and a step experiment was performed. In addition, a kLa of 1 h-1 was determined. The results revealed that the experimental outcomes of the type of flow and gas fractions are in line with the theoretical simulation. The new design shows promising properties for flexible methanation and will be tested.}, language = {en} } @misc{OPUS4-10805, title = {Pr{\"u}fungsordnung f{\"u}r die Bachelorstudieng{\"a}nge „Biotechnologie" und „Biotechnologie mit Praxis- oder Auslandssemester" im Fachbereich Chemie und Biotechnologie an der FH Aachen}, address = {Aachen}, organization = {FH Aachen}, pages = {12 Seiten}, year = {2023}, abstract = {\S 1 | Geltungsbereich der Pr{\"u}fungsordnung \S 2 | Ziel des Studiums, Zweck der Pr{\"u}fung, Abschlussgrad \S 3 | Beginn, Dauer, Umfang und Gliederung des Studiums \S 4 | Zugang zum Studium, Praktikum \S 5 | Pr{\"u}fungsausschuss \S 6 | Studien- und Pr{\"u}fungselemente \S 7 | Zulassung zu den Pr{\"u}fungen \S 8 | Durchf{\"u}hrung von Pr{\"u}fungen \S 9 | Verbesserungsversuch \S 10 | Anrechnung von Studienzeiten, Studien- und Pr{\"u}fungsleistungen \S 11 | Praxissemester \S 12 | Mobilit{\"a}tssemester (Auslandssemester) \S 13 | Bachelorprojekt\S 14 | Gesamtnote, Zeugnis, Bachelorurkunde \S 15 | Inkrafttreten, Ver{\"o}ffentlichung Anlage 1 | Studienplan Kernstudium Anlage 2 | Allgemeine Kompetenzen}, language = {de} } @article{AlnemerKotliarNeuhausetal.2023, author = {Alnemer, Momin Sami Mohammad and Kotliar, Konstantin and Neuhaus, Valentin and Pape, Hans-Christoph and Ciritsis, Bernhard D.}, title = {Cost-effectiveness analysis of surgical proximal femur fracture prevention in elderly: a Markov cohort simulation model}, series = {Cost Effectiveness and Resource Allocation}, journal = {Cost Effectiveness and Resource Allocation}, number = {21, Article number: 77}, publisher = {Springer Nature}, issn = {1478-7547}, doi = {10.1186/s12962-023-00482-4}, pages = {12 Seiten}, year = {2023}, abstract = {Background Hip fractures are a common and costly health problem, resulting in significant morbidity and mortality, as well as high costs for healthcare systems, especially for the elderly. Implementing surgical preventive strategies has the potential to improve the quality of life and reduce the burden on healthcare resources, particularly in the long term. However, there are currently limited guidelines for standardizing hip fracture prophylaxis practices. Methods This study used a cost-effectiveness analysis with a finite-state Markov model and cohort simulation to evaluate the primary and secondary surgical prevention of hip fractures in the elderly. Patients aged 60 to 90 years were simulated in two different models (A and B) to assess prevention at different levels. Model A assumed prophylaxis was performed during the fracture operation on the contralateral side, while Model B included individuals with high fracture risk factors. Costs were obtained from the Centers for Medicare \& Medicaid Services, and transition probabilities and health state utilities were derived from available literature. The baseline assumption was a 10\% reduction in fracture risk after prophylaxis. A sensitivity analysis was also conducted to assess the reliability and variability of the results. Results With a 10\% fracture risk reduction, model A costs between \$8,850 and \$46,940 per quality-adjusted life-year (\$/QALY). Additionally, it proved most cost-effective in the age range between 61 and 81 years. The sensitivity analysis established that a reduction of ≥ 2.8\% is needed for prophylaxis to be definitely cost-effective. The cost-effectiveness at the secondary prevention level was most sensitive to the cost of the contralateral side's prophylaxis, the patient's age, and fracture treatment cost. For high-risk patients with no fracture history, the cost-effectiveness of a preventive strategy depends on their risk profile. In the baseline analysis, the incremental cost-effectiveness ratio at the primary prevention level varied between \$11,000/QALY and \$74,000/QALY, which is below the defined willingness to pay threshold. Conclusion Due to the high cost of hip fracture treatment and its increased morbidity, surgical prophylaxis strategies have demonstrated that they can significantly relieve the healthcare system. Various key assumptions facilitated the modeling, allowing for adequate room for uncertainty. Further research is needed to evaluate health-state-associated risks.}, language = {en} } @article{LaarmannThomaMischetal.2023, author = {Laarmann, Lukas and Thoma, Andreas and Misch, Philipp and R{\"o}th, Thilo and Braun, Carsten and Watkins, Simon and Fard, Mohammad}, title = {Automotive safety approach for future eVTOL vehicles}, series = {CEAS Aeronautical Journal}, journal = {CEAS Aeronautical Journal}, publisher = {Springer Nature}, issn = {1869-5590 (Online)}, doi = {10.1007/s13272-023-00655-0}, pages = {11 Seiten}, year = {2023}, abstract = {The eVTOL industry is a rapidly growing mass market expected to start in 2024. eVTOL compete, caused by their predicted missions, with ground-based transportation modes, including mainly passenger cars. Therefore, the automotive and classical aircraft design process is reviewed and compared to highlight advantages for eVTOL development. A special focus is on ergonomic comfort and safety. The need for further investigation of eVTOL's crashworthiness is outlined by, first, specifying the relevance of passive safety via accident statistics and customer perception analysis; second, comparing the current state of regulation and certification; and third, discussing the advantages of integral safety and applying the automotive safety approach for eVTOL development. Integral safety links active and passive safety, while the automotive safety approach means implementing standardized mandatory full-vehicle crash tests for future eVTOL. Subsequently, possible crash impact conditions are analyzed, and three full-vehicle crash load cases are presented.}, language = {en} } @article{ThomessenThomaBraun2023, author = {Thomessen, Karolin and Thoma, Andreas and Braun, Carsten}, title = {Bio-inspired altitude changing extension to the 3DVFH* local obstacle avoidance algorithm}, series = {CEAS Aeronautical Journal}, journal = {CEAS Aeronautical Journal}, publisher = {Springer}, address = {Wien}, issn = {1869-5590 (Online)}, doi = {10.1007/s13272-023-00691-w}, pages = {11 Seiten}, year = {2023}, abstract = {Obstacle avoidance is critical for unmanned aerial vehicles (UAVs) operating autonomously. Obstacle avoidance algorithms either rely on global environment data or local sensor data. Local path planners react to unforeseen objects and plan purely on local sensor information. Similarly, animals need to find feasible paths based on local information about their surroundings. Therefore, their behavior is a valuable source of inspiration for path planning. Bumblebees tend to fly vertically over far-away obstacles and horizontally around close ones, implying two zones for different flight strategies depending on the distance to obstacles. This work enhances the local path planner 3DVFH* with this bio-inspired strategy. The algorithm alters the goal-driven function of the 3DVFH* to climb-preferring if obstacles are far away. Prior experiments with bumblebees led to two definitions of flight zone limits depending on the distance to obstacles, leading to two algorithm variants. Both variants reduce the probability of not reaching the goal of a 3DVFH* implementation in Matlab/Simulink. The best variant, 3DVFH*b-b, reduces this probability from 70.7 to 18.6\% in city-like worlds using a strong vertical evasion strategy. Energy consumption is higher, and flight paths are longer compared to the algorithm version with pronounced horizontal evasion tendency. A parameter study analyzes the effect of different weighting factors in the cost function. The best parameter combination shows a failure probability of 6.9\% in city-like worlds and reduces energy consumption by 28\%. Our findings demonstrate the potential of bio-inspired approaches for improving the performance of local path planning algorithms for UAV.}, language = {en} } @article{MoehrenBergmannJanseretal.2023, author = {M{\"o}hren, Felix and Bergmann, Ole and Janser, Frank and Braun, Carsten}, title = {On the influence of elasticity on propeller performance: a parametric study}, series = {CEAS Aeronautical Journal}, volume = {14}, journal = {CEAS Aeronautical Journal}, publisher = {Springer Nature}, address = {Berlin}, issn = {1869-5590 (Online)}, doi = {10.1007/s13272-023-00649-y}, pages = {311 -- 323}, year = {2023}, abstract = {The aerodynamic performance of propellers strongly depends on their geometry and, consequently, on aeroelastic deformations. Knowledge of the extent of the impact is crucial for overall aircraft performance. An integrated simulation environment for steady aeroelastic propeller simulations is presented. The simulation environment is applied to determine the impact of elastic deformations on the aerodynamic propeller performance. The aerodynamic module includes a blade element momentum approach to calculate aerodynamic loads. The structural module is based on finite beam elements, according to Timoshenko theory, including moderate deflections. Several fixed-pitch propellers with thin-walled cross sections made of both isotropic and non-isotropic materials are investigated. The essential parameters are varied: diameter, disc loading, sweep, material, rotational, and flight velocity. The relative change of thrust between rigid and elastic blades quantifies the impact of propeller elasticity. Swept propellers of large diameters or low disc loadings can decrease the thrust significantly. High flight velocities and low material stiffness amplify this tendency. Performance calculations without consideration of propeller elasticity can lead to decreased efficiency. To avoid cost- and time-intense redesigns, propeller elasticity should be considered for swept planforms and low disc loadings.}, language = {en} } @book{ScheilenPeifferGoerlichetal.2023, author = {Scheilen, Jana and Peiffer, Max and G{\"o}rlich, Anna-Luisa and Hacke, Theresa}, title = {Aachener Online-Schriften Wirtschaft und Recht. Band 7. 02/2023}, editor = {Kroll-Ludwigs, Kathrin and Bassen-Metz, Yasmine and Bernecker, Andreas and Eggert, Mathias and Fritz, Thomas and Golland, Alexander and H{\"o}hne, Tim and Tran, Duc Hung and Vogt, J{\"u}rgen}, publisher = {FH Aachen / Fachbereich Wirtschaftswissenschaften}, address = {Aachen}, publisher = {Fachhochschule Aachen}, pages = {245 Seiten}, year = {2023}, abstract = {1. Die Wirksamkeitsvoraussetzungen der Verdachtsk{\"u}ndigung gegen{\"u}ber einem Arbeitnehmer - Jana Scheilen | Seite 4-66 2. Besteuerungsinkongruenzen im Internationalen Steuerrecht - die Umsetzung der ATAD II in Form des \S 4k EStG in Bezug auf hybride Gesellschaften und Betriebsst{\"a}tten - Max Peiffer | Seite 67-126 3. Der Zuzug einer Gesellschaft aus einem Drittstaat nach Deutschland - Herausforderungen durch die modifizierte Sitztheorie und L{\"o}sungsm{\"o}glichkeiten - Anna-Luisa G{\"o}rlich | Seite 127-189 4. Escalation of Commitment und seine Einflussfaktoren in der unternehmerischen Entscheidungsfindung: Ein Szenario-Experiment - Theresa Hacke | Seite 190-245}, language = {de} } @masterthesis{Rabe2023, type = {Bachelor Thesis}, author = {Rabe, Leonie Maria}, title = {Wohlf{\"u}hlen in den eigenen vier W{\"a}nden : ein Produkt, welches die Wohn- und Lebensqualit{\"a}t steigert.}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {125 Seiten}, year = {2023}, abstract = {Viele Menschen f{\"u}hlen sich in ihren eigenen vier W{\"a}nden nicht wohl. Sie sind gestresst und k{\"o}nnen nicht entspannen. Ziel dieser Arbeit ist es, ein Produkt zu erschaffen, welches in seinen Funktionen und seinem Design daf{\"u}r sorgt, dass die Nutzer:innen sich zu Hause wohler f{\"u}hlen. Es soll alle Funktionen vereinen, die daf{\"u}r sorgen, dass der Alltagsstress besser bew{\"a}ltigt werden kann und man in seinem Zuhause entspannen kann und den Moment mehr genießt. Entstanden ist Iwa, ein Produkt, welches zum einen als Luftreiniger arbeitet und die Raumluft filtert und im Zusammenspiel mit Licht und Musik die Raumatmosph{\"a}re verbessert und so Stress mindert. Das Design soll genau wie die Funktionen beruhigend, entspannend und erdend wirken. Es ist angelehnt am Zen-Design. So bietet Iwa einen großen Mehrwert. Die Funktionen sorgen im Zusammenspiel mit dem Design f{\"u}r eine verbesserte Wohn- und Lebensqualit{\"a}t.}, language = {de} } @article{HammerQuitterMayntzetal.2023, author = {Hammer, Thorben and Quitter, Julius and Mayntz, Joscha and Bauschat, J.-Michael and Dahmann, Peter and G{\"o}tten, Falk and Hille, Sebastian and Stumpf, Eike}, title = {Free fall drag estimation of small-scale multirotor unmanned aircraft systems using computational fluid dynamics and wind tunnel experiments}, series = {CEAS Aeronautical Journal}, journal = {CEAS Aeronautical Journal}, publisher = {Springer}, address = {Wien}, issn = {1869-5590 (Online)}, doi = {10.1007/s13272-023-00702-w}, pages = {14 Seiten}, year = {2023}, abstract = {New European Union (EU) regulations for UAS operations require an operational risk analysis, which includes an estimation of the potential danger of the UAS crashing. A key parameter for the potential ground risk is the kinetic impact energy of the UAS. The kinetic energy depends on the impact velocity of the UAS and, therefore, on the aerodynamic drag and the weight during free fall. Hence, estimating the impact energy of a UAS requires an accurate drag estimation of the UAS in that state. The paper at hand presents the aerodynamic drag estimation of small-scale multirotor UAS. Multirotor UAS of various sizes and configurations were analysed with a fully unsteady Reynolds-averaged Navier-Stokes approach. These simulations included different velocities and various fuselage pitch angles of the UAS. The results were compared against force measurements performed in a subsonic wind tunnel and provided good consistency. Furthermore, the influence of the UAS`s fuselage pitch angle as well as the influence of fixed and free spinning propellers on the aerodynamic drag was analysed. Free spinning propellers may increase the drag by up to 110\%, depending on the fuselage pitch angle. Increasing the fuselage pitch angle of the UAS lowers the drag by 40\% up to 85\%, depending on the UAS. The data presented in this paper allow for increased accuracy of ground risk assessments.}, language = {en} } @article{JanusAchtsnichtDrinicetal.2023, author = {Janus, Kevin Alexander and Achtsnicht, Stefan and Drinic, Aleksander and Kopp, Alexander and Keusgen, Michael and Sch{\"o}ning, Michael Josef}, title = {Transient magnesium-based thin-film temperature sensor on a flexible, bioabsorbable substrate for future medical applications}, series = {Applied Research}, journal = {Applied Research}, number = {Accepted manuscript}, publisher = {Wiley-VCH}, issn = {2702-4288 (Print)}, doi = {10.1002/appl.202300102}, pages = {22 Seiten}, year = {2023}, abstract = {In this work, the bioabsorbable materials, namely fibroin, polylactide acid (PLA), magnesium and magnesium oxide are investigated for their application as transient, resistive temperature detectors (RTD). For this purpose, a thin-film magnesium-based meander-like electrode is deposited onto a flexible, bioabsorbable substrate (fibroin or PLA) and encapsulated (passivated) by additional magnesium oxide layers on top and below the magnesium-based electrode. The morphology of different layered RTDs is analyzed by scanning electron microscopy. The sensor performance and lifetime of the RTD is characterized both under ambient atmospheric conditions between 30°C and 43°C, and wet tissue-like conditions with a constant temperature regime of 37°C. The latter triggers the degradation process of the magnesium-based layers. The 3-layers RTDs on a PLA substrate could achieve a lifetime of 8.5 h. These sensors also show the best sensor performance under ambient atmospheric conditions with a mean sensitivity of 0.48 Ω/°C ± 0.01 Ω/°C.}, language = {en} } @article{JanusAchtsnichtTempeletal.2023, author = {Janus, Kevin Alexander and Achtsnicht, Stefan and Tempel, Laura and Drinic, Aleksaner and Kopp, Alexander and Keusgen, Michael and Sch{\"o}ning, Michael Josef}, title = {Influence of fibroin membrane composition and curing parameters on the performance of a biodegradable enzymatic biosensor manufactured from Silicon-Free Carbon}, series = {Physica status solidi : pss. A, Applications and materials science}, volume = {220}, journal = {Physica status solidi : pss. A, Applications and materials science}, number = {22}, publisher = {Wiley-VCH}, address = {Weinheim}, issn = {1862-6300 (Print)}, doi = {10.1002/pssa.202300081}, pages = {10 Seiten}, year = {2023}, abstract = {Herein, fibroin, polylactide (PLA), and carbon are investigated for their suitability as biocompatible and biodegradable materials for amperometric biosensors. For this purpose, screen-printed carbon electrodes on the biodegradable substrates fibroin and PLA are modified with a glucose oxidase membrane and then encapsulated with the biocompatible material Ecoflex. The influence of different curing parameters of the carbon electrodes on the resulting biosensor characteristics is studied. The morphology of the electrodes is investigated by scanning electron microscopy, and the biosensor performance is examined by amperometric measurements of glucose (0.5-10 mM) in phosphate buffer solution, pH 7.4, at an applied potential of 1.2 V versus a Ag/AgCl reference electrode. Instead of Ecoflex, fibroin, PLA, and wound adhesive are tested as alternative encapsulation compounds: a series of swelling tests with different fibroin compositions, PLA, and Ecoflex has been performed before characterizing the most promising candidates by chronoamperometry. Therefore, the carbon electrodes are completely covered with the particular encapsulation material. Chronoamperometric measurements with H2O2 concentrations between 0.5 and 10 mM enable studying the leakage current behavior.}, language = {en} }