@inproceedings{LangWirtzHeitzeretal.1999,
  author    = {Lang, H. and Wirtz, K. and Heitzer, Michael and Staat, Manfred and Oettel, R.},
  title     = {Zyklische Einspielversuche zur Verifikation von Shakedown-Analysen mittels FEM},
  year      = {1999},
  abstract  = {Im Rahmen von Erm{\"u}dungsanalysen ist nachzuweisen, daß die thermisch bedingten fortschreitenden Deformationen begrenzt bleiben. Hierzu ist die Abgrenzung des Shakedown-Bereiches (Einspielen) vom Ratchetting-Bereich (fortschreitende Deformation) von Interesse. Im Rahmen eines EU-gef{\"o}rderten Forschungsvorhabens wurden Experimente mit einem 4-Stab-Modell durchgef{\"u}hrt. Das Experiment bestand aus einem wassergek{\"u}hlten inneren Rohr und drei isolierten und beheizbaren {\"a}ußeren Probest{\"a}ben. Das System wurde durch alternierende Axialkr{\"a}fte, denen alternierende Temperaturen an den {\"a}ußeren St{\"a}ben {\"u}berlagert wurden, belastet. Die Versuchsparameter wurden teilweise nach vorausgegangenen Einspielanalysen gew{\"a}hlt. W{\"a}hrend der Versuchsdurchf{\"u}hrung wurden Temperaturen und Dehnungen zeitabh{\"a}ngig gemessen. Begleitend und nachfolgend zur Versuchsdurchf{\"u}hrung wurden die Belastungen und die daraus resultierenden Beanspruchungen nachvollzogen. Bei dieser inkrementellen elasto-plastischen Analyse mit dem Programm ANSYS wurden unterschiedliche Werkstoffmodelle angesetzt. Die Ergebnisse dieser Simulationsberechnung dienen dazu, die Shakedown-Analysen mittels FE-Methode zu verifizieren.},
  subject      = {Einspielen <Werkstoff>},
  language  = {de}
}
@inproceedings{KoplinSiemonsOcenValentinetal.2006,
  author    = {Koplin, Tobias J. and Siemons, Maike and Oc{\´e}n-Val{\´e}ntin, C{\´e}sar and Sanders, Daniel and Simon, Ulrich},
  title     = {Workflow for high throughput screening of gas sensing materials},
  url       = {http://nbn-resolving.de/urn:nbn:de:hbz:a96-opus-1407},
  year      = {2006},
  abstract  = {The workflow of a high throughput screening setup for the rapid identification of new and improved sensor materials is presented. The polyol method was applied to prepare nanoparticular metal oxides as base materials, which were functionalised by surface doping. Using multi-electrode substrates and high throughput impedance spectroscopy (HT-IS) a wide range of materials could be screened in a short time. Applying HT-IS in search of new selective gas sensing materials a NO2-tolerant NO sensing material with reduced sensitivities towards other test gases was identified based on iridium doped zinc oxide. Analogous behaviour was observed for iridium doped indium oxide.},
  subject      = {Biosensor},
  language  = {en}
}
@inproceedings{MuellerVeggianHaenniBeuscheretal.1980,
  author    = {M{\"u}ller-Veggian, Mattea and Haenni, D. R. and Beuscher, H. and Lieder, R. M.},
  title     = {Weak coupling of a neutron hole to a ¹⁴⁶ Gd core ; an in-beam study of ¹⁴⁵ Gd},
  series = {Structure of medium-heavy nuclei, 1979 : proceedings of the 6. European Physical Soc. Nuclear Divisional Conference on the Structure of Medium-Heavy Nuclei held in Rhodes, Greece, 1-4 May 1979 / ed. Committee: G. S. Anagnostatos ... - (Conference series / Institute of Physics London, Bristol ; 49)},
  booktitle = {Structure of medium-heavy nuclei, 1979 : proceedings of the 6. European Physical Soc. Nuclear Divisional Conference on the Structure of Medium-Heavy Nuclei held in Rhodes, Greece, 1-4 May 1979 / ed. Committee: G. S. Anagnostatos ... - (Conference series / Institute of Physics London, Bristol ; 49)},
  publisher = {Inst. of Physics},
  address   = {Bristol},
  isbn      = {0-85498-140-3},
  pages     = {133},
  year      = {1980},
  language  = {en}
}
@inproceedings{ArinkinDigel2009,
  author    = {Arinkin, Vladimir and Digel, Ilya},
  title     = {Water bridge phenomenon : [abstract]},
  year      = {2009},
  abstract  = {One of interesting but not well known water properties is related to appearance of highly ordered structures in response to strong electrical field. In 1893 Sir William Armstrong placed a cotton thread between two wine glasses filled with chemically pure water. When high DC voltage was applied between the glasses, a connection consisting of water formed, producing a "water bridge"},
  subject      = {Hydrodynamik},
  language  = {en}
}
@inproceedings{KraftZoell2014,
  author    = {Kraft, Bodo and Z{\"o}ll, Axel},
  title     = {Von der Langstrecke zum Sprint - Agile Methoden in traditionellen Unternehmen},
  series = {Projektmanagement und Vorgehensmodelle 2014 : soziale Aspekte und Standardisierung},
  booktitle = {Projektmanagement und Vorgehensmodelle 2014 : soziale Aspekte und Standardisierung},
  editor    = {Engstler, Martin},
  publisher = {Gesellschaft f{\"u}r Informatik},
  address   = {Bonn},
  organization    = {FH Aachen, University of Applied Sciences},
  isbn      = {978-3-88579-630-5},
  pages     = {35 -- 46},
  year      = {2014},
  language  = {de}
}
@inproceedings{KraftWilhelms2005,
  author    = {Kraft, Bodo and Wilhelms, Nils},
  title     = {Visual Knowledge Specification for Conceptual Design},
  year      = {2005},
  abstract  = {Proc. of the 2005 ASCE Intl. Conf. on Computing in Civil Engineering (ICCC 2005) eds. L. Soibelman und F. Pena-Mora, Seite 1-14, ASCE (CD-ROM), Cancun, Mexico, 2005 Current CAD tools are not able to support the fundamental conceptual design phase, and none of them provides consistency analyses of sketches produced by architects. To give architects a greater support at the conceptual design phase, we develop a CAD tool for conceptual design and a knowledge specification tool allowing the definition of conceptually relevant knowledge. The knowledge is specific to one class of buildings and can be reused. Based on a dynamic knowledge model, different types of design rules formalize the knowledge in a graph-based realization. An expressive visual language provides a user-friendly, human readable representation. Finally, consistency analyses enable conceptual designs to be checked against this defined knowledge. In this paper we concentrate on the knowledge specification part of our project.},
  subject      = {CAD},
  language  = {en}
}
@inproceedings{BlumAlbannaBenninghausetal.2019,
  author    = {Blum, Yannik and Albanna, Walid and Benninghaus, Anne and Kotliar, Konstantin},
  title     = {Vasomotion in retinal vessels of patients presenting post hemorrhagic hydrocephalus following subarachnoid hemorrhage},
  series = {3rd YRA MedTech Symposium 2019 : May 24 / 2019 / FH Aachen},
  booktitle = {3rd YRA MedTech Symposium 2019 : May 24 / 2019 / FH Aachen},
  editor    = {Staat, Manfred and Erni, Daniel},
  publisher = {Universit{\"a}t Duisburg-Essen},
  address   = {Duisburg},
  organization    = {MedTech Symposium},
  isbn      = {978-3-940402-22-6},
  doi       = {10.17185/duepublico/48750},
  pages     = {38 -- 39},
  year      = {2019},
  abstract  = {Clearance of blood components and fluid drainage play a crucial role in subarachnoid hemorrhage (SAH) and post hemorrhagic hydrocephalus (PHH). With the involvement of interstitial fluid (ISF) and cerebrospinal fluid (CSF), two pathways for the clearance of fluid and solutes in the brain are proposed. Starting at the level of capillaries, flow of ISF follows along the basement membranes in the walls of cerebral arteries out of the parenchyma to drain into the lymphatics and CSF [1]-[3]. Conversely, it is shown that CSF enters the parenchyma between glial and pial basement membranes of penetrating arteries [4]-[6]. Nevertheless, the involved structures and the contribution of either flow pathway to fluid balance between the subarachnoid space and interstitial space remains controversial. Low frequency oscillations in vascular tone are referred to as vasomotion and corresponding vasomotion waves are modeled as the driving force for flow of ISF out of the parenchyma [7]. Retinal vessel analysis (RVA) allows non-invasive measurement of retinal vessel vasomotion with respect to diameter changes [8]. Thus, the aim of the study is to investigate vasomotion in RVA signals of SAH and PHH patients.},
  language  = {en}
}
@inproceedings{AzarDigel2019,
  author    = {Azar, Fouad and Digel, Ilya},
  title     = {Utilization of fluorescence spectroscopy and neural networks in clinical analysis},
  series = {3rd YRA MedTech Symposium 2019 : May 24 / 2019 / FH Aachen},
  booktitle = {3rd YRA MedTech Symposium 2019 : May 24 / 2019 / FH Aachen},
  editor    = {Staat, Manfred and Erni, Daniel},
  publisher = {Universit{\"a}t Duisburg-Essen},
  address   = {Duisburg},
  organization    = {MedTech Symposium},
  isbn      = {978-3-940402-22-6},
  doi       = {10.17185/duepublico/48750},
  pages     = {40 -- 41},
  year      = {2019},
  abstract  = {Fluorescence topography of human urine in combination with learning algorithms can provide a variant pattern recognition method in analytical clinical chemistry and, eventually, diagnosis.},
  language  = {en}
}
@inproceedings{SchreiberBarkschatKraft2014,
  author    = {Schreiber, Marc and Barkschat, Kai and Kraft, Bodo},
  title     = {Using Continuous Integration to organize and monitor the annotation process of domain specific corpora},
  series = {5th International Conference on Information and Communication Systems (ICICS) : 1-3 April 2014, Irbid, Jordanien},
  booktitle = {5th International Conference on Information and Communication Systems (ICICS) : 1-3 April 2014, Irbid, Jordanien},
  organization    = {International Conference on Information and Communication Systems <5, 2014, Irbid, Jordanien>},
  isbn      = {978-1-4799-3022-7},
  doi       = {10.1109/IACS.2014.6841958},
  pages     = {1 -- 6},
  year      = {2014},
  language  = {en}
}
@inproceedings{TranStaat2014,
  author    = {Tran, Thanh Ngoc and Staat, Manfred},
  title     = {Uncertain multimode failure and limit analysis of shells},
  series = {11th World Congress on Computational Mechanics (WCCM XI) ; 5th European Conference on Computational Mechanics (ECCM V) ; 6th European Conference on Computational Fluid Dynamics (ECFD VI) ; July 20-25, 2014, Barcelona},
  booktitle = {11th World Congress on Computational Mechanics (WCCM XI) ; 5th European Conference on Computational Mechanics (ECCM V) ; 6th European Conference on Computational Fluid Dynamics (ECFD VI) ; July 20-25, 2014, Barcelona},
  editor    = {Onate, E.},
  organization    = {World Congress on Computational Mechanics <11, 2014, Barcelona>},
  pages     = {1 -- 12},
  year      = {2014},
  language  = {en}
}