@inproceedings{ZischankKernFrentzeletal.2000, author = {Zischank, Wolfgang J. and Kern, Alexander and Frentzel, Ralf and Heidler, Fridolin and Seevers, M.}, title = {Assessment of the lightning transient coupling to control cables interconnecting structures in large industrial facilities and power plants}, year = {2000}, abstract = {Large industrial facilities and power plants often require a huge number fo information and control cables between the differnet structures. These I\&C-cables can be routed in reinforced concrete cable ducts or in isolated buried cable runs. KTA 2206 is the German lightning protection standard for nuclear power plants. During the last several years considerable effort has been made to revise this standard. Despite the well established principles and design guidelines for the construction of the lightning protection system, this standard puts special emphasis on the coupling of transient overvoltages to I\&C-cables.}, language = {en} } @inproceedings{ZischankHeidlerWiesingeretal.2004, author = {Zischank, Wolfgang J. and Heidler, Fridolin and Wiesinger, J. and Stimper, K. and Kern, Alexander and Seevers, M.}, title = {Magnetic Fields and Induced Voltages inside LPZ 1 Measured at a 1:6 Scale Model Building}, year = {2004}, abstract = {Laborexperimente zu Blitzschutzzonen in Stahlbetongeb{\"a}uden anhand eines Modells im Maßstab 1:6}, language = {en} } @inproceedings{ZischankHeidlerKernetal.2002, author = {Zischank, Wolfgang J. and Heidler, Fridolin and Kern, Alexander and Metwally, I. A. and Wiesinger, J. and Seevers, M.}, title = {Laboratory simulation of direct lightning strokes to a modelled building - measurement of magnetic fields and induced voltages}, year = {2002}, abstract = {In IEC 61312-2 equations for the assessment of the magnetic fields inside structures due to a direct lightning strike are given. These equations are based on computer simulations for shields consisting of a single-layer steel grid of a given mesh width. Real constructions, however, contain at least two layers of reinforcement steel grids. The objective of this study was to experimentally determine the additional shielding effectiveness of a second reinforcement layer compared to a single-layer grid. To this end, simulated structures were set up in the high current laboratory. The structures consisted of cubic cages of 2 m side length with one or with two reinforcement grids, respectively. The structures were exposed to direct lightning currents representing the variety of anticipated lightning current waveforms. The magnetic fields and their derivatives at several positions inside the structure as well as the voltage between "floor" and "roof" in the center were determined for different current injection points. From these data the improvement of the shielding caused by a second reinforcement layer is derived.}, language = {en} } @inproceedings{Wollert2016, author = {Wollert, J{\"o}rg}, title = {Industrie 4.0 - warten bis die Revolution vorbei ist?}, series = {Automatisierung im Fokus von Industrie 4.0 : Tagungsband AALE 2016 ; 13. Fachkonferenz, L{\"u}beck}, booktitle = {Automatisierung im Fokus von Industrie 4.0 : Tagungsband AALE 2016 ; 13. Fachkonferenz, L{\"u}beck}, publisher = {DIV Deutscher Industrieverlag GmbH}, address = {M{\"u}nchen}, isbn = {978-3-8356-7312-0}, pages = {127 -- 136}, year = {2016}, language = {de} } @inproceedings{WolfUlbrich2007, author = {Wolf, Martin and Ulbrich, Daniel}, title = {Decision-Support-System kokas zur Sanierungsplanung und Strategieentwicklung}, year = {2007}, abstract = {Dr.-Ing. Martin Wolf ; Dipl.-Kaufm. Daniel Ulbrich , Dr. Pecher und Partner Ingenieurgesellschaft mbH, M{\"u}nchen. 31 S. (S. 139-168). Beitrag zum 1. Aachener Softwaretag in der Wasserwirtschaft < 1, 2007, Aachen>. Zusammenfasung [der Autoren] Die {\"o}ffentlichen Kanalnetze Deutschlands stellen mit einem Wert von rd. 330 Mrd. € ein enormes Anlageverm{\"o}gen dar. Auf Grund des oft schlechten Zustandes und geringer Ausgaben zur Instandhaltung und Erneuerung ist zu erwarten, dass durch die gegenw{\"a}rtige Sanierungspraxis eher ein Substanzwertverzehr des Kanalnetzes als ein Substanzwerterhalt im Sinne des Generationenvertrages erzielt wird. F{\"u}r einen nachhaltigen Betrieb und Erhalt der Kanalnetze sind deshalb Sanierungsstrategien erforderlich, die neben den technischen und gesetzlichen Anforderungen auch den mittel- und langfristigen Substanzwertverlauf ber{\"u}cksichtigen. Dieser wird beeinflusst vom erforderlichen oder durchgef{\"u}hrten Sanierungsumfang, Art und Zusammensetzung der ausgew{\"a}hlten Maßnahmen sowie der zeitlichen Abfolge der Sanierungsmaßnahmen. Erheblichen Einfluss auf den Substanzwertverlauf hat zudem die Ber{\"u}cksichtigung der hydraulischen Verh{\"a}ltnisse sowie der optisch nicht sichtbaren Undichtheiten. Entsprechend ist es erforderlich, die tats{\"a}chlich vorhandenen Defizite zu ermitteln und die Sanierungsmaßnahmen sowie eine Strategie zur Umsetzung zu erarbeiten. Da sich gezeigt hat, dass alleine die Einhaltung der technischen und gesetzlichen Anforderung f{\"u}r einen Substanzwerterhalt nicht ausreicht, muss die geplante Strategie im Dr.-Ing. Martin Wolf 139 von 170 Decision-Support-System kokas zur Sanierungsplanung und Strategieentwicklung 1. Aachener Softwaretag in der Wasserwirtschaft Hinblick auf die nachhaltige Wertentwicklung {\"u}berpr{\"u}ft und ggf. Anpassungen vorgenommen werden. Kurzfristig erzielte Einsparungen durch reduzierten Schadensumfang oder einseitige Maßnahmenwahl erm{\"o}glichen zwar im g{\"u}nstigsten Fall, die Anforderungen einzuhalten, gehen jedoch zwangsl{\"a}ufig zu Lasten des Substanzwertes und f{\"u}hren mittel- und langfristig zu einer Versch{\"a}rfung der Kosten- und Geb{\"u}hrensituation. Der monet{\"a}re, am konkreten Sanierungsaufwand orientierte Substanzwertansatz erm{\"o}glicht dabei, technische und kaufm{\"a}nnische Gesichtspunkte praxisnah zu verkn{\"u}pfen und den bestm{\"o}glichen Ausgleich zwischen den gegenl{\"a}ufigen Zielen Substanzwerterhalt und Geb{\"u}hrenkonstanz zu finden.}, subject = {Kanalisation}, language = {de} } @inproceedings{Wessling2007, author = {Weßling, Matthias}, title = {Leadership Perspectives: Research Findings, Theories, Practical Experiences}, year = {2007}, abstract = {Leadership Perspectives: Research Findings, Theories, Practical Experiences: Results of Leadership Research and exemplarily application cases show the perspectives and consequences for leadership practice and the following requirements for executives in future.}, subject = {Leadership}, language = {en} } @inproceedings{Wessling2007, author = {Weßling, Matthias}, title = {Motivation and Leadership - The Reiss-Profile of the 16 Basic Desires: Research results and managerial applications}, year = {2007}, abstract = {Recent Results of the scientific Reiss-Profile (16 basic desires) due to the concept of Prof. Dr. Steven Reiss (State University Ohio, U.S.A.), supplemented by the comparative analysis of empirical motivational profiles of european executives of various companies.}, subject = {Motivation}, language = {en} } @inproceedings{Wessling2007, author = {Weßling, Matthias}, title = {Provocative Communication in Coaching and Leadership: scientific research and managerial applications of the Provocative Communication Style}, year = {2007}, abstract = {Concept, scientific research and managerial applications of Provocative Coaching, according to the „Provocative Therapy" of Prof. Dr. Frank Farrelly (University of Wisconsin, U.S.A) in terms of an application of the Provocative Communication Style in specific situations of practical leadership, especially in the role of a coach for their subordinates.}, subject = {Kommunikation}, language = {en} } @inproceedings{Wessling2006, author = {Weßling, Matthias}, title = {Como motivar a si mesmo e aos outros - o valor dos 16 Motivos Vitais para Lideran{\c{c}}a}, year = {2006}, abstract = {O Perfil Reiss apresenta no resultado uma vis{\~a}o da estrutura dos motivos e impulsos de uma pessoa. O ponto de sa{\´i}da para a an{\´a}lise do resultado {\´e} o conhecimento de que os motivos vitais (= valores e metas de sobreviv{\^e}ncia) formam a moldura, na qual as compet{\^e}ncias e capacidades que uma pessoa possui possam se desabrochar de forma ideal. A partir desse princ{\´i}pio, n{\~a}o existe no Perfil Reiss nenhum resultado que se possa classificar como correto ou falso, nem como bom ou mau. Uma compara{\c{c}}{\~a}o entre o resultado do Perfil Reiss e o conte{\´u}do de uma atividade apresentada ou ambicionada d{\´a} informa{\c{c}}{\~a}o sobre at{\´e} que ponto a capacidade de rendimento de uma pessoa nessa posi{\c{c}}{\~a}o pode vir ou vir{\´a} a se desenvolver por um longo tempo.}, subject = {F{\"u}hrung}, language = {es} } @inproceedings{Wellmann2006, author = {Wellmann, Judith}, title = {Perspektiven eines Bauingenieurs im konstruktiven Ingenieurbau}, year = {2006}, abstract = {In: Alfha.net / Sektion Bauingenieurwesen: 1. [Erster] Erfahrungsaustausch : Absolventen des Fachbereichs Bauingenieurwesens berichten. 13. Oktober 2006. S. 7-12 Die Berufsperspektiven im konstruktiven Ingenieurbau werden trotz sinkendem Bedarf an Statikern positiv bewertet.}, subject = {Ingenieurbau}, language = {de} } @inproceedings{WagnerSchoening2006, author = {Wagner, Torsten and Sch{\"o}ning, Michael Josef}, title = {Preface of the Special Issue of I3S 2005 in J{\"u}lich (Germany)}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:a96-opus-1365}, year = {2006}, abstract = {International Symposium on Sensor Science, I3S 2005 <3; 2005; Juelich, Germany> In: Sensors 2006, 6, 260-261 ISSN 1424-8220}, subject = {Biosensor}, language = {en} } @inproceedings{WagnerKohlFroebaetal.2006, author = {Wagner, Thorsten and Kohl, Claus-Dieter and Fr{\"o}ba, Michael and Tiemann, Michael}, title = {Gas sensing properties of ordered mesoporous SnO2}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:a96-opus-1422}, year = {2006}, abstract = {We report on the synthesis and CO gas-sensing properties of mesoporous tin(IV) oxides (SnO2). For the synthesis cetyltrimethylammonium bromide (CTABr) was used as a structure-directing agent; the resulting SnO2 powders were applied as films to commercially available sensor substrates by drop coating. Nitrogen physisorption shows specific surface areas up to 160 m2·g-1 and mean pore diameters of about 4 nm, as verified by TEM. The film conductance was measured in dependence on the CO concentration in humid synthetic air at a constant temperature of 300 °C. The sensors show a high sensitivity at low CO concentrations and turn out to be largely insensitive towards changes in the relative humidity. We compare the materials with commercially available SnO2-based sensors.}, subject = {Biosensor}, language = {en} } @inproceedings{UibelBlass2008, author = {Uibel, Thomas and Blaß, Hans Joachim}, title = {Spaltverhalten von Holz beim Eindrehen von selbstbohrenden Holzschrauben}, series = {Doktorandenkolloquium Holzbau Forschung und Praxis : Stuttgart, 05./06. M{\"a}rz 2008}, booktitle = {Doktorandenkolloquium Holzbau Forschung und Praxis : Stuttgart, 05./06. M{\"a}rz 2008}, editor = {Kuhlmann, U.}, publisher = {Univ., Inst. f{\"u}r Konstruktion und Entwurf}, address = {Stuttgart}, pages = {135 -- 142}, year = {2008}, language = {de} } @inproceedings{UibelBlass2010, author = {Uibel, Thomas and Blaß, Hans Joachim}, title = {Determining Suitable Spacings and Distances for Self-tapping Screws by Experimental and Numerical Studies}, series = {Proceedings of the 11th World Conference on Timber Engineering, WCTE 2010 : World Conference on Timber Engineering; [June 20 - 24, 2010, Riva del Garda, Trento, Italy] . Vol. III, Riva del Garda, Italy 2010}, booktitle = {Proceedings of the 11th World Conference on Timber Engineering, WCTE 2010 : World Conference on Timber Engineering; [June 20 - 24, 2010, Riva del Garda, Trento, Italy] . Vol. III, Riva del Garda, Italy 2010}, editor = {Cecotti, A.}, pages = {669 -- 670}, year = {2010}, language = {en} } @inproceedings{UibelBlass2010, author = {Uibel, Thomas and Blaß, Hans Joachim}, title = {A new method to determine suitable spacings and distances for self-tapping screws}, series = {Meeting ... / International Council for Research and Innovation in Building and Construction, Working Commission W18 - Timber Structures}, volume = {43}, booktitle = {Meeting ... / International Council for Research and Innovation in Building and Construction, Working Commission W18 - Timber Structures}, publisher = {Lehrstuhl f{\"u}r Ingenieurholzbau und Baukonstruktionen}, address = {Karlsruhe}, issn = {1864-1784}, year = {2010}, abstract = {The determination of spacing, edge and end distance requirements for self-tapping screws requires numerous and comprehensive insertion tests. Yet the results of such tests cannot be transferred to other types of screws or even to screws of different diameter because of differences in shape or geometry. To reduce the effort of insertion tests a new method was developed which allows the estimation of required spacings, distances and timber thickness.}, language = {en} } @inproceedings{Uibel2007, author = {Uibel, Thomas}, title = {Brettsperrholz - Verbindungen mit mechanischen Verbindungsmitteln}, series = {Ingenieurholzbau, Karlsruher Tage 2007 : Forschung f{\"u}r die Praxis; 4. und 5. Oktober 2007; Tagungsband / Universit{\"a}t Karlsruhe (TH), Lehrstuhl f{\"u}r Ingenieurholzbau und Baukonstruktionen}, booktitle = {Ingenieurholzbau, Karlsruher Tage 2007 : Forschung f{\"u}r die Praxis; 4. und 5. Oktober 2007; Tagungsband / Universit{\"a}t Karlsruhe (TH), Lehrstuhl f{\"u}r Ingenieurholzbau und Baukonstruktionen}, publisher = {Bruder-Verlag}, address = {K{\"o}ln}, pages = {62 -- 73}, year = {2007}, language = {de} } @inproceedings{Uibel2009, author = {Uibel, Thomas}, title = {Beurteilung der Spaltgefahr beim Eindrehen von selbstbohrenden Holzschrauben}, series = {Forum Holz/Bau Garmisch 09 : Internationales Holzbauforum (IHF) ; Congress Centrum, Garmisch-Partenkirchen, 2. - 4. Dezember 2009 ; aus der Praxis - f{\"u}r die Praxis, Wirtschaft, Markt, {\"O}kologie, Energieeffizienz, Architektur, Tragwerke, Realisierungen}, booktitle = {Forum Holz/Bau Garmisch 09 : Internationales Holzbauforum (IHF) ; Congress Centrum, Garmisch-Partenkirchen, 2. - 4. Dezember 2009 ; aus der Praxis - f{\"u}r die Praxis, Wirtschaft, Markt, {\"O}kologie, Energieeffizienz, Architektur, Tragwerke, Realisierungen}, publisher = {Fraunhofer IRB}, address = {Stuttgart}, isbn = {978-3-8167-8187-5}, year = {2009}, language = {de} } @inproceedings{Tuerk2006, author = {T{\"u}rk, Roman}, title = {Sanierung von Hausanschl{\"u}ssen}, year = {2006}, abstract = {In: Alfha.net / Sektion Bauingenieurwesen: 1. [Erster] Erfahrungsaustausch : Absolventen des Fachbereichs Bauingenieurwesens berichten. 13. Oktober 2006. S. 23-24. Zusammenfassung des Vortrags.}, subject = {Hausanschluss}, language = {de} } @inproceedings{TymeckiGlabKoncki2006, author = {Tymecki, Lukasz and Glab, Stanislaw and Koncki, Robert}, title = {Miniaturized, planar ion-selective electrodes fabricated by means of thick-film technology}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:a96-opus-1506}, year = {2006}, abstract = {Various planar technologies are employed for developing solid-state sensors having low cost, small size and high reproducibility; thin- and thick-film technologies are most suitable for such productions. Screen-printing is especially suitable due to its simplicity, low-cost, high reproducibility and efficiency in large-scale production. This technology enables the deposition of a thick layer and allows precise pattern control. Moreover, this is a highly economic technology, saving large amounts of the used inks. In the course of repetitions of the film-deposition procedure there is no waste of material due to additivity of this thick-film technology. Finally, the thick films can be easily and quickly deposited on inexpensive substrates. In this contribution, thick-film ion-selective electrodes based on ionophores as well as crystalline ion-selective materials dedicated for potentiometric measurements are demonstrated. Analytical parameters of these sensors are comparable with those reported for conventional potentiometric electrodes. All mentioned thick-film strip electrodes have been totally fabricated in only one, fully automated thickfilm technology, without any additional manual, chemical or electrochemical steps. In all cases simple, inexpensive, commercially available materials, i.e. flexible, plastic substrates and easily cured polymer-based pastes were used.}, subject = {Biosensor}, language = {en} } @inproceedings{TranStaatKreissig2007, author = {Tran, Thanh Ngoc and Staat, Manfred and Kreißig, R.}, title = {Calculation of load carrying capacity of shell structures with elasto-plastic material by direct methods}, year = {2007}, abstract = {Proceedings of the International Conference on Material Theory and Nonlinear Dynamics. MatDyn. Hanoi, Vietnam, Sept. 24-26, 2007, 8 p. In this paper, a method is introduced to determine the limit load of general shells using the finite element method. The method is based on an upper bound limit and shakedown analysis with elastic-perfectly plastic material model. A non-linear constrained optimisation problem is solved by using Newton's method in conjunction with a penalty method and the Lagrangean dual method. Numerical investigation of a pipe bend subjected to bending moments proves the effectiveness of the algorithm.}, subject = {Finite-Elemente-Methode}, language = {en} }