@article{DroopChenRadfordetal.2023,
  author    = {Droop, Philipp and Chen, Shaohuang and Radford, Melissa J. and Paulßen, Elisabeth and Gates, Byron D. and Reilly, Raymond M. and Radchenko, Valery and Hoehr, Cornelia},
  title     = {Synthesis of 197m/gHg labelled gold nanoparticles for targeted radionuclide therapy},
  series = {Radiochimica Acta},
  volume    = {111},
  journal   = {Radiochimica Acta},
  number    = {10},
  publisher = {De Gruyter},
  address   = {Berlin [u.a.]},
  issn      = {2193-3405},
  doi       = {10.1515/ract-2023-0144},
  pages     = {773 -- 779},
  year      = {2023},
  abstract  = {Meitner-Auger-electron emitters have a promising potential for targeted radionuclide therapy of cancer because of their short range and the high linear energy transfer of Meitner-Auger-electrons (MAE). One promising MAE candidate is 197m/gHg with its half-life of 23.8 h and 64.1 h, respectively, and high MAE yield. Gold nanoparticles (AuNPs) that are labelled with 197m/gHg could be a helpful tool for radiation treatment of glioblastoma multiforme when infused into the surgical cavity after resection to prevent recurrence. To produce such AuNPs, 197m/gHg was embedded into pristine AuNPs. Two different syntheses were tested starting from irradiated gold containing trace amounts of 197m/gHg. When sodium citrate was used as reducing agent, no 197m/gHg labelled AuNPs were formed, but with tannic acid, 197m/gHg labeled AuNPs were produced. The method was optimized by neutralizing the pH (pH = 7) of the Au/197m/gHg solution, which led to labelled AuNPs with a size of 12.3 ± 2.0 nm as measured by transmission electron microscopy. The labelled AuNPs had a concentration of 50 μg (gold)/mL with an activity of 151 ± 93 kBq/mL (197gHg, time corrected to the end of bombardment).},
  language  = {en}
}
@inproceedings{TreulingCzarneckiWolf2023,
  author    = {Treuling, Clemens and Czarnecki, Christian and Wolf, Martin},
  title     = {Projekt WiLMo - Wirtschaftsinformatik Lehr- und Lernmodule},
  series = {Angewandte Forschung in der Wirtschaftsinformatik 2023 : Tagungsband zur 36. AKWI-Jahrestagung},
  booktitle = {Angewandte Forschung in der Wirtschaftsinformatik 2023 : Tagungsband zur 36. AKWI-Jahrestagung},
  pages     = {161 -- 169},
  year      = {2023},
  abstract  = {Die potenziellen Auswirkungen der Digitalisierung auf die Lehre sind seit langem Gegenstand ausf{\"u}hrlicher Diskussionen innerhalb der Wirtschaftsinformatik (WI) (z. B. in Auth et al. 2021, Barton et al. 2019, Klotz et al. 2019). Nicht zuletzt der in nahezu allen Wirtschaftszweigen bestehende Mangel an qualifizierten Fachkr{\"a}ften lenkt den Diskurs auf einen verbesserten Zugang zu Bildung und gleichen Bildungschancen. Aus dieser Vision heraus und dem Schub der Digitalisierung entstehen Bildungskonzepte wie Open Educational Resources (OER), die gesellschaftlichen Problemen, wie dem des Fachkr{\"a}ftemangels, entgegenwirken sollen. Im Rahmen dieses Kurzbeitrags wird das Projekt WiLMo - "Wirtschaftsinformatik Lehr- und Lernmodule" vorgestellt. WiLMo wird im Rahmen von OERContent.nrw unter Beteiligung von sechs Hochschulen entwickelt und gef{\"o}rdert. Alle Projektbeteiligten arbeiten gemeinsam daran, einheitliche digitale Lehr- und Lernmaterialien im OER-Format f{\"u}r die Kernmodule der Wirtschaftsinformatik zu entwickeln und in garantiert hoher Qualit{\"a}t zur Verf{\"u}gung zu stellen.},
  language  = {de}
}
@book{Czarnecki2023,
  author    = {Czarnecki, Christian},
  title     = {Angewandte Forschung in der Wirtschaftsinformatik 2023 : Tagungsband zur 36. AKWI-Jahrestagung},
  editor    = {Czarnecki, Christian and L{\"u}bbe, Alexander and Meister, Vera G. and M{\"u}ller, Christian and Steglich, Mike and Walther, Mathias},
  organization    = {Arbeitskreis Wirtschaftsinformatik an Hochschulen f{\"u}r Angewandte Wissenschaften im deutschsprachigen Raum (AKWI)},
  doi       = {10.15771/1794},
  pages     = {214 Seiten},
  year      = {2023},
  abstract  = {Beitr{\"a}ge der Fachtagung „Angewandte Forschung in der Wirtschaftsinformatik - Zukunft gestalten" im Rahmen der 36. Jahrestagung des Arbeitskreises Wirtschaftsinformatik an Hochschulen f{\"u}r Angewandte Wissenschaften (AKWI) vom 11. bis 13.09.2023 an der Technischen Hochschule Wildau},
  language  = {de}
}
@incollection{SchultLosseCzarneckietal.2023,
  author    = {Schult, Prince Garcia and Losse, Ann-Kathrin and Czarnecki, Christian and Sultanow, Eldar},
  title     = {Proposing a Framework to address the Sustainable Development Goals},
  series = {EnviroInfo 2023},
  booktitle = {EnviroInfo 2023},
  publisher = {GI - Gesellschaft f{\"u}r Informatik},
  address   = {Bonn},
  isbn      = {978-3-88579-736-4},
  issn      = {1617-5468},
  doi       = {10.18420/env2023-022},
  pages     = {243 -- 249},
  year      = {2023},
  abstract  = {Reducing poverty, protecting the planet, and improving life on earth for everyone are the essential goals of the "2030 Agenda for Sustainable Development"committed by the United Nations (UN). Achieving those goals will require technological innovation as well as their implementation in almost all areas of our business and day-to-day life. This paper proposes a high-level framework that collects and structures different uses cases addressing the goals defined by the UN. Hence, it contributes to the discussion by proposing technical innovations that can be used to achieve those goals. As an example, the goal "Climate Action{\"i}s discussed in detail by describing use cases related to tackling biodiversity loss in order to conservate ecosystems.},
  language  = {en}
}
@inproceedings{VladovaUllrichSultanowetal.2023,
  author    = {Vladova, Gergana and Ullrich, Andr{\´e} and Sultanow, Eldar and Tobolla, Marinho and Sebrak, Sebastian and Czarnecki, Christian and Brockmann, Carsten},
  title     = {Visual analytics for knowledge management},
  series = {INFORMATIK 2023 - Designing Futures: Zuk{\"u}nfte gestalten},
  booktitle = {INFORMATIK 2023 - Designing Futures: Zuk{\"u}nfte gestalten},
  publisher = {GI - Gesellschaft f{\"u}r Informatik},
  address   = {Bonn},
  isbn      = {978-3-88579-731-9},
  issn      = {1617-5468},
  doi       = {10.18420/inf2023_187},
  pages     = {1851 -- 1870},
  year      = {2023},
  abstract  = {The management of knowledge in organizations considers both established long-term processes and cooperation in agile project teams. Since knowledge can be both tacit and explicit, its transfer from the individual to the organizational knowledge base poses a challenge in organizations. This challenge increases when the fluctuation of knowledge carriers is exceptionally high. Especially in large projects in which external consultants are involved, there is a risk that critical, company-relevant knowledge generated in the project will leave the company with the external knowledge carrier and thus be lost. In this paper, we show the advantages of an early warning system for knowledge management to avoid this loss. In particular, the potential of visual analytics in the context of knowledge management systems is presented and discussed. We present a project for the development of a business-critical software system and discuss the first implementations and results.},
  language  = {en}
}
@misc{BragardHueningKowalewski2023,
  author    = {Bragard, Michael and H{\"u}ning, Felix and Kowalewski, Paul},
  title     = {Vorrichtung zur Relativlagenbestimmung [Offenlegungschrift]},
  year      = {2023},
  abstract  = {Die Erfindung betrifft eine Vorrichtung zur Bestimmung einer Relativlage zwischen einem feststehenden Teil und einem zu demselben in eine Bewegungsrichtung bewegbaren beweglichen Teil, wobei der feststehende Teil mit einem Wiegandsensor versehen ist, wobei der Wiegandsensor zwischen zwei gegenpolig zueinander ausgebildeten Permanentmagneten angeordnet ist und dass der bewegliche Teil eine Mehrzahl von beabstandet zueinander angeordneten Magnetisierungsstegen aus einem magnetisch leitenden Material aufweist, die in der Bewegungsrichtung zumindest eine gleich große Erstreckung aufweisen wie der Permanentmagnet, dass ein Abstand zwischen benachbarten Magnetisierungsstegen derart gew{\"a}hlt ist, dass in einer ersten Relativlage ein erster Permanentmagnet von einem der Magnetisierungsstege {\"u}berdeckt ist und ein zweiter Permanentmagnet nicht von einem der Magnetisierungsstege {\"u}berdeckt ist.},
  language  = {de}
}
@inproceedings{GrundAltherr2023,
  author    = {Grund, Raphael M. and Altherr, Lena},
  title     = {Development of an open source energy disaggregation tool for the home automation platform Home Assistant},
  series = {Tagungsband AALE 2023 : mit Automatisierung gegen den Klimawandel},
  booktitle = {Tagungsband AALE 2023 : mit Automatisierung gegen den Klimawandel},
  editor    = {Reiff-Stephan, J{\"o}rg and J{\"a}kel, Jens and Schwarz, Andr{\´e}},
  publisher = {le-tex publishing services GmbH},
  address   = {Leipzig},
  isbn      = {978-3-910103-01-6},
  doi       = {10.33968/2023.02},
  pages     = {11 -- 20},
  year      = {2023},
  abstract  = {In order to reduce energy consumption of homes, it is important to make transparent which devices consume how much energy. However, power consumption is often only monitored aggregated at the house energy meter. Disaggregating this power consumption into the contributions of individual devices can be achieved using Machine Learning. Our work aims at making state of the art disaggregation algorithms accessibe for users of the open source home automation platform Home Assistant.},
  language  = {en}
}
@inproceedings{HueningMund2023,
  author    = {H{\"u}ning, Felix and Mund, Cindy},
  title     = {Integration of agile development in standard labs},
  series = {51st Annual Conference of the European Society for Engineering Education (SEFI)},
  booktitle = {51st Annual Conference of the European Society for Engineering Education (SEFI)},
  doi       = {10.21427/NK4Z-WS73},
  pages     = {11 Seiten},
  year      = {2023},
  abstract  = {In addition to the technical content, modern courses at university should also teach professional skills to enhance the competencies of students towards their future work. The competency driven approach including technical as well as professional skills makes it necessary to find a suitable way for the integration into the corresponding module in a scalable and flexible manner. Agile development, for example, is essential for the development of modern systems and applications and makes use of dedicated professional skills of the team members, like structured group dynamics and communication, to enable the fast and reliable development. This paper presents an easy to integrate and flexible approach to integrate Scrum, an agile development method, into the lab of an existing module. Due to the different role models of Scrum the students have an individual learning success, gain valuable insight into modern system development and strengthen their communication and organization skills. The approach is implemented and evaluated in the module Vehicle Systems, but it can be transferred easily to other technical courses as well. The evaluation of the implementation considers feedback of all stakeholders, students, supervisor and lecturers, and monitors the observations during project lifetime.},
  language  = {en}
}
@misc{Huening2023,
  author    = {H{\"u}ning, Felix},
  title     = {Sensorvorrichtung zur Erfassung eines Magnetfelds sowie magnetbasiertes Sensorsystem zur Erfassung einer Bewegung eines beweglichen Objekts},
  year      = {2023},
  abstract  = {Eine Sensorvorrichtung (10;110;210;310;410) zur Erfassung eines Magnetfelds, mit einer Wiegand-Sensoreinheit (12;112;212) umfassend: • - mindestens zwei Wiegand-Dr{\"a}hte (20) und • - eine Spulenanordnung (22;122;222), die die mindestens zwei Wiegand-Dr{\"a}hte (20) radial umschließt und die • • • ein Sensorelement (26;126;226) und • • ein Triggerelement (28;128;228), durch das ein Triggermagnetfeld erzeugbar ist, bildet, ist bekannt. Um ein magnetbasiertes Sensorsystem (300;400) zur Erfassung einer Bewegung eines beweglichen Objekts (301;401) zu erm{\"o}glichen, das ohne externe Energieversorgung zuverl{\"a}ssig sowie energieeffizient arbeitet und kosteng{\"u}nstig hergestellt werden kann, ist bei der erfindungsgem{\"a}ßen Sensorvorrichtung (10;110;210;310;410) eine Wiegand-Triggereinheit (14;14a) vorhanden, umfassend: • - einen Wiegand-Draht (30) und • - eine Trigger-Sensorspule (32), die den Wiegand-Draht (30) radial umschließt, wobei ein erstes Ende der Trigger-Sensorspule (32) der Wiegand-Triggereinheit (14;14a) mit einem ersten Ende des Triggerelements (28;128;228) der Wiegand-Sensoreinheit (12;112;212) elektrisch verbunden ist und ein zweites Ende der Trigger-Sensorspule (32) der Wiegand-Triggereinheit (14;14a) mit einem zweiten Ende des Triggerelements (28;128;228) der Wiegand-Sensoreinheit (12;112;212) elektrisch verbunden ist. Auf diese Weise verst{\"a}rkt ein in der Trigger-Sensorspule (32) erzeugter Impuls das Gesamtmagnetfeld, das auf die Wiegand-Dr{\"a}hte (20) in der Sensoreinheit einwirkt, derart, dass die Triggefeldst{\"a}rke aller Wiegand-Dr{\"a}hte (20) {\"u}berschritten wird und diese im wesentlichen zeitgleich ausl{\"o}sen.},
  language  = {de}
}
@inproceedings{SteuerDankert2023,
  author    = {Steuer-Dankert, Linda},
  title     = {A crazy little thing called sustainability},
  series = {51st Annual Conference of the European Society for Engineering Education (SEFI)},
  booktitle = {51st Annual Conference of the European Society for Engineering Education (SEFI)},
  doi       = {10.21427/9CQR-VC94},
  pages     = {11 Seiten},
  year      = {2023},
  abstract  = {Achieving the 17 Sustainable Development Goals (SDGs) set by the United Nations (UN) in 2015 requires global collaboration between different stakeholders. Industry, and in particular engineers who shape industrial developments, have a special role to play as they are confronted with the responsibility to holistically reflect sustainability in industrial processes. This means that, in addition to the technical specifications, engineers must also question the effects of their own actions on an ecological, economic and social level in order to ensure sustainable action and contribute to the achievement of the SDGs. However, this requires competencies that enable engineers to apply all three pillars of sustainability to their own field of activity and to understand the global impact of industrial processes. In this context, it is relevant to understand how industry already reflects sustainability and to identify competences needed for sustainable development.},
  language  = {en}
}
@article{KowalewskiBragardHueningetal.2023,
  author    = {Kowalewski, Paul and Bragard, Michael and H{\"u}ning, Felix and De Doncker, Rik W.},
  title     = {An inexpensive Wiegand-sensor-based rotary encoder without rotating magnets for use in electrical drives},
  series = {IEEE Transactions on Instrumentation and Measurement},
  journal   = {IEEE Transactions on Instrumentation and Measurement},
  publisher = {IEEE},
  issn      = {0018-9456 (Print)},
  doi       = {10.1109/TIM.2023.3326166},
  pages     = {10 Seiten},
  year      = {2023},
  abstract  = {This paper introduces an inexpensive Wiegand-sensor-based rotary encoder that avoids rotating magnets and is suitable for electrical-drive applications. So far, Wiegand-sensor-based encoders usually include a magnetic pole wheel with rotating permanent magnets. These encoders combine the disadvantages of an increased magnet demand and a limited maximal speed due to the centripetal force acting on the rotating magnets. The proposed approach reduces the total demand of permanent magnets drastically. Moreover, the rotating part is manufacturable from a single piece of steel, which makes it very robust and cheap. This work presents the theoretical operating principle of the proposed approach and validates its benefits on a hardware prototype. The presented proof-of-concept prototype achieves a mechanical resolution of 4.5 ° by using only 4 permanent magnets, 2Wiegand sensors and a rotating steel gear wheel with 20 teeth.},
  language  = {en}
}
@inproceedings{TischbeinKeanVertgewalletal.2023,
  author    = {Tischbein, Franziska and Kean, Kilian and Vertgewall, Chris Martin and Ulbig, Andreas and Altherr, Lena},
  title     = {Determination of the topology of low-voltage distribution grids using cluster methods},
  series = {27th International Conference on Electricity Distribution (CIRED 2023)},
  booktitle = {27th International Conference on Electricity Distribution (CIRED 2023)},
  publisher = {IEEE},
  isbn      = {978-1-83953-855-1},
  doi       = {10.1049/icp.2023.0478},
  pages     = {1 -- 5},
  year      = {2023},
  abstract  = {Due to the decarbonization of the energy sector, the electric distribution grids are undergoing a major transformation, which is expected to increase the load on the operating resources due to new electrical loads and distributed energy resources. Therefore, grid operators need to gradually move to active grid management in order to ensure safe and reliable grid operation. However, this requires knowledge of key grid variables, such as node voltages, which is why the mass integration of measurement technology (smart meters) is necessary. Another problem is the fact that a large part of the topology of the distribution grids is not sufficiently digitized and models are partly faulty, which means that active grid operation management today has to be carried out largely blindly. It is therefore part of current research to develop methods for determining unknown grid topologies based on measurement data. In this paper, different clustering algorithms are presented and their performance of topology detection of low voltage grids is compared. Furthermore, the influence of measurement uncertainties is investigated in the form of a sensitivity analysis.},
  language  = {en}
}
@inproceedings{EichenbaumNikolovskiMuelhensetal.2023,
  author    = {Eichenbaum, Julian and Nikolovski, Gjorgji and M{\"u}lhens, Leon and Reke, Michael and Ferrein, Alexander and Scholl, Ingrid},
  title     = {Towards a lifelong mapping approach using Lanelet 2 for autonomous open-pit mine operations},
  series = {2023 IEEE 19th International Conference on Automation Science and Engineering (CASE)},
  booktitle = {2023 IEEE 19th International Conference on Automation Science and Engineering (CASE)},
  publisher = {IEEE},
  isbn      = {979-8-3503-2069-5 (Online)},
  doi       = {10.1109/CASE56687.2023.10260526},
  pages     = {8 Seiten},
  year      = {2023},
  abstract  = {Autonomous agents require rich environment models for fulfilling their missions. High-definition maps are a well-established map format which allows for representing semantic information besides the usual geometric information of the environment. These are, for instance, road shapes, road markings, traffic signs or barriers. The geometric resolution of HD maps can be as precise as of centimetre level. In this paper, we report on our approach of using HD maps as a map representation for autonomous load-haul-dump vehicles in open-pit mining operations. As the mine undergoes constant change, we also need to constantly update the map. Therefore, we follow a lifelong mapping approach for updating the HD maps based on camera-based object detection and GPS data. We show our mapping algorithm based on the Lanelet 2 map format and show our integration with the navigation stack of the Robot Operating System. We present experimental results on our lifelong mapping approach from a real open-pit mine.},
  language  = {en}
}
@book{Heuermann2023,
  author    = {Heuermann, Holger},
  title     = {Mikrowellentechnik : Feldsimulation, nichtlineare Schaltungstechnik, Komponenten und Subsysteme, Plasmatechnik, Antennen und Ausbreitung},
  edition   = {2. Auflage},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-41286-9},
  doi       = {10.1007/978-3-658-41287-6},
  pages     = {XVI, 394 Seiten},
  year      = {2023},
  abstract  = {Das Lehrbuch behandelt alle Aspekte, die den aktuellen Stand der GHz-Technik betreffen. Das Buch behandelt die verschiedenen numerischen Feldsimulationsverfahren. Mit vielen modernen Themen.},
  language  = {de}
}
@incollection{EggertZaehlWolfetal.2023,
  author    = {Eggert, Mathias and Z{\"a}hl, Philipp M. and Wolf, Martin R. and Haase, Martin},
  title     = {Applying leaderboards for quality improvement in software development projects},
  series = {Software Engineering for Games in Serious Contexts},
  booktitle = {Software Engineering for Games in Serious Contexts},
  editor    = {Cooper, Kendra M.L. and Bucchiarone, Antonio},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-031-33337-8 (Print)},
  doi       = {10.1007/978-3-031-33338-5_11},
  pages     = {243 -- 263},
  year      = {2023},
  abstract  = {Software development projects often fail because of insufficient code quality. It is now well documented that the task of testing software, for example, is perceived as uninteresting and rather boring, leading to poor software quality and major challenges to software development companies. One promising approach to increase the motivation for considering software quality is the use of gamification. Initial research works already investigated the effects of gamification on software developers and come to promising. Nevertheless, a lack of results from field experiments exists, which motivates the chapter at hand. By conducting a gamification experiment with five student software projects and by interviewing the project members, the chapter provides insights into the changing programming behavior of information systems students when confronted with a leaderboard. The results reveal a motivational effect as well as a reduction of code smells.},
  language  = {en}
}
@book{Heuermann2023,
  author    = {Heuermann, Holger},
  title     = {Hochfrequenztechnik. Komponenten und Mess-, Funk-, RFID- sowie Lokalisierungssysteme},
  edition   = {4},
  publisher = {Springer Fachmedien},
  address   = {Wiesbaden},
  isbn      = {978-3-658-37825-7 (Print)},
  pages     = {XV, 453 Seiten},
  year      = {2023},
  abstract  = {Dieses Lehr- und Fachbuch vermittelt anschaulich die Grundlagen der HF-Technik, gibt konkrete Beschreibungen f{\"u}r den Entwurf von linearen Komponenten aus Bauteilen wie auch Leitungen f{\"u}r High-Speed- und HF-Schaltungen. Dem Leser wird vermittelt, wie Bauteile modelliert und Schaltungen synthetisiert und optimiert werden. Mit Hilfe frei verf{\"u}gbarer Simulationssoftware k{\"o}nnen GHz-Schaltungen selbst entwickelt werden. Viele {\"U}bungsbeispiele erm{\"o}glichen die Eigenkontrolle des Wissensstandes. Weiterhin werden komplexe nichtlineare Komponenten wie Hochfrequenzmischer, Oszillatoren und Synthesegeneratoren in ihrer Funktionalit{\"a}t dargestellt. Die neuen Mixed-Mode-Streuparameter sowie deren Leitungs- und Schaltungstechnik f{\"u}r Anwendungen der schnellen Digital- und der modernen HF-Technik sind ausf{\"u}hrlich beschrieben. Es wird auf Systeme f{\"u}r folgende Bereiche eingegangen: Streuparametermesstechnik, verschiedene Funktechniken, UHF-RFID und Lokalisierung- und Ortung. Dem Leser wird somit erm{\"o}glicht, komplexe GHz-Schaltungen insbesondere mit Halbleiter-, SMD- und LTCC-Schaltungen zu entwickeln.},
  language  = {de}
}
@inproceedings{AlhaskirTschescheLinkeetal.2023,
  author    = {Alhaskir, Mohamed and Tschesche, Matteo and Linke, Florian and Schriewer, Elisabeth and Weber, Yvonne and Wolking, Stefan and R{\"o}hrig, Rainer and Koch, Henner and Kutafina, Ekaterina},
  title     = {ECG matching: an approach to synchronize ECG datasets for data quality comparisons},
  series = {Proceedings of the 68th Annual Meeting of the German Association of Medical Informatics, Biometry, and Epidemiology e.V. (gmds) 2023},
  volume    = {307},
  booktitle = {Proceedings of the 68th Annual Meeting of the German Association of Medical Informatics, Biometry, and Epidemiology e.V. (gmds) 2023},
  editor    = {R{\"o}hrig, Rainer and Grabe, Niels and Haag, Martin and H{\"u}bner, Ursula and Sax, Ulrich and Schmidt, Carsten Oliver and Sedlmayr, Martin and Zapf, Antonia},
  publisher = {IOS Press},
  isbn      = {978-1-64368-428-4 (Print)},
  doi       = {10.3233/SHTI230718},
  pages     = {225 -- 232},
  year      = {2023},
  abstract  = {Clinical assessment of newly developed sensors is important for ensuring their validity. Comparing recordings of emerging electrocardiography (ECG) systems to a reference ECG system requires accurate synchronization of data from both devices. Current methods can be inefficient and prone to errors. To address this issue, three algorithms are presented to synchronize two ECG time series from different recording systems: Binned R-peak Correlation, R-R Interval Correlation, and Average R-peak Distance. These algorithms reduce ECG data to their cyclic features, mitigating inefficiencies and minimizing discrepancies between different recording systems. We evaluate the performance of these algorithms using high-quality data and then assess their robustness after manipulating the R-peaks. Our results show that R-R Interval Correlation was the most efficient, whereas the Average R-peak Distance and Binned R-peak Correlation were more robust against noisy data.},
  language  = {en}
}
@inproceedings{ViehmannLimpertHofmannetal.2023,
  author    = {Viehmann, Tarik and Limpert, Nicolas and Hofmann, Till and Henning, Mike and Ferrein, Alexander and Lakemeyer, Gerhard},
  title     = {Winning the RoboCup logistics league with visual servoing and centralized goal reasoning},
  series = {RoboCup 2022: Robot World Cup XXV},
  booktitle = {RoboCup 2022: Robot World Cup XXV},
  editor    = {Eguchi, Amy and Lau, Nuno and Paetzel-Pr{\"u}smann, Maike and Wanichanon, Thanapat},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-031-28468-7 (Print)},
  doi       = {https://doi.org/10.1007/978-3-031-28469-4_25},
  pages     = {300 -- 312},
  year      = {2023},
  abstract  = {The RoboCup Logistics League (RCLL) is a robotics competition in a production logistics scenario in the context of a Smart Factory. In the competition, a team of three robots needs to assemble products to fulfill various orders that are requested online during the game. This year, the Carologistics team was able to win the competition with a new approach to multi-agent coordination as well as significant changes to the robot's perception unit and a pragmatic network setup using the cellular network instead of WiFi. In this paper, we describe the major components of our approach with a focus on the changes compared to the last physical competition in 2019.},
  language  = {en}
}
@inproceedings{ZaehlTheisWolfetal.2023,
  author    = {Z{\"a}hl, Philipp M. and Theis, Sabine and Wolf, Martin and K{\"o}hler, Klemens},
  title     = {Teamwork in software development and what personality has to do with it - an overview},
  series = {Virtual, Augmented and Mixed Reality},
  booktitle = {Virtual, Augmented and Mixed Reality},
  editor    = {Chen, Jessie Y. C. and Fragomeni, Gino},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-031-35633-9 (Print)},
  doi       = {10.1007/978-3-031-35634-6_10},
  pages     = {130 -- 153},
  year      = {2023},
  abstract  = {Due to the increasing complexity of software projects, software development is becoming more and more dependent on teams. The quality of this teamwork can vary depending on the team composition, as teams are always a combination of different skills and personality types. This paper aims to answer the question of how to describe a software development team and what influence the personality of the team members has on the team dynamics. For this purpose, a systematic literature review (n=48) and a literature search with the AI research assistant Elicit (n=20) were conducted. Result: A person's personality significantly shapes his or her thinking and actions, which in turn influences his or her behavior in software development teams. It has been shown that team performance and satisfaction can be strongly influenced by personality. The quality of communication and the likelihood of conflict can also be attributed to personality.},
  language  = {en}
}
@inproceedings{ArndtConzenElsenetal.2023,
  author    = {Arndt, Tobias and Conzen, Max and Elsen, Ingo and Ferrein, Alexander and Galla, Oskar and K{\"o}se, Hakan and Schiffer, Stefan and Tschesche, Matteo},
  title     = {Anomaly detection in the metal-textile industry for the reduction of the cognitive load of quality control workers},
  series = {PETRA '23: Proceedings of the 16th International Conference on PErvasive Technologies Related to Assistive Environments},
  booktitle = {PETRA '23: Proceedings of the 16th International Conference on PErvasive Technologies Related to Assistive Environments},
  publisher = {ACM},
  isbn      = {9798400700699},
  doi       = {10.1145/3594806.3596558},
  pages     = {535 -- 542},
  year      = {2023},
  abstract  = {This paper presents an approach for reducing the cognitive load for humans working in quality control (QC) for production processes that adhere to the 6σ -methodology. While 100\% QC requires every part to be inspected, this task can be reduced when a human-in-the-loop QC process gets supported by an anomaly detection system that only presents those parts for manual inspection that have a significant likelihood of being defective. This approach shows good results when applied to image-based QC for metal textile products.},
  language  = {en}
}