@inproceedings{AridaKloockSchoening2006,
  author    = {Arida, Hassan A. and Kloock, Joachim P. and Sch{\"o}ning, Michael Josef},
  title     = {Novel organic membrane-based thin-film microsensors for the determination of heavy metal cations},
  url       = {http://nbn-resolving.de/urn:nbn:de:hbz:a96-opus-1545},
  year      = {2006},
  abstract  = {A first step towards the fabrication and electrochemical evaluation of thin-film microsensors based on organic PVC membranes for the determination of Hg(II), Cd(II), Pb(II) and Cu(II) ions in solutions has been realised. The membrane-coating mixture used in the preparation of this new type of microsensors is incorporating PVC as supporting matrix, o-nitrophenyloctylether (o-NPOE) as solvent mediator and a recently synthesized Hg[dimethylglyoxime(phene)]2+ and Bis-(4-hydroxyacetophenone)-ethylenediamine as electroactive materials for Hg(II) and Cd(II), respectively. A set of three commercialised ionophores for Cd(II), Pb(II) and Cu(II) has been also used for comparison. Thin-film microsensors based on these membranes showed a Nernstian response of slope (26-30 mV/dec.) for the respective tested cations. The potentiometric response characteristics (linear range, pH range, detection limit and response time) are comparable with those obtained by conventional membranes as well as coated wire electrodes prepared from the same membrane. The realisation of the new organic membrane-based thin-film microsensors overcomes the problem of an insufficient selectivity of solid-state-based thinfilm sensors.},
  subject      = {Biosensor},
  language  = {en}
}
@inproceedings{ArinkinDigel2009,
  author    = {Arinkin, Vladimir and Digel, Ilya},
  title     = {Water bridge phenomenon : [abstract]},
  year      = {2009},
  abstract  = {One of interesting but not well known water properties is related to appearance of highly ordered structures in response to strong electrical field. In 1893 Sir William Armstrong placed a cotton thread between two wine glasses filled with chemically pure water. When high DC voltage was applied between the glasses, a connection consisting of water formed, producing a "water bridge"},
  subject      = {Hydrodynamik},
  language  = {en}
}
@inproceedings{ArtmannDigelLinderetal.2011,
  author    = {Artmann, Gerhard and Digel, Ilya and Linder, Peter and Temiz Artmann, Ayseg{\"u}l},
  title     = {Biophysical and Engineering Contributions to Plant Research},
  year      = {2011},
  abstract  = {Tests with palm tree leaves have just started yet and scan data are in the process to be analyzed. The final goal of future project for palm tree gender and species recognition will be to develop optical scanning technology to be applied to date palm tree leaves for in-situ screening purposes. Depending on the software used and the particular requirements of the users the technology potentially shall be able to identify palm tree diseases, palm tree gender, and species of young date palm trees by scanning leaves.},
  subject      = {Pflanzenphysiologie},
  language  = {en}
}
@inproceedings{ArtmannStadlerEmbsetal.2010,
  author    = {Artmann, Gerhard and Stadler, Andreas M. and Embs, Jan P. and Zaccai, Giuseppe and B{\"u}ldt, Georg and Digel, Ilya and Temiz Artmann, Ayseg{\"u}l},
  title     = {The crucial role of water in a phase transition of hemoglobin at body temperature : [abstract]},
  year      = {2010},
  abstract  = {The observation of a temperature transition of hemoglobin occurring at a critical temperature close to body temperature},
  subject      = {H{\"a}moglobin},
  language  = {en}
}
@inproceedings{BallmannRaatschenStaat1985,
  author    = {Ballmann, J. and Raatschen, Hans-J{\"u}rgen and Staat, Manfred},
  title     = {High stress intensities in focussing zones of waves},
  doi       = {10.1016/B978-0-444-42520-1.50015-3},
  year      = {1985},
  abstract  = {The propagation of mechanical waves in plates of isotropic elastic material is investigated. After a short introduction to the understanding of focussing of stress waves in a plate with a curved boundary the method of characteristics is applied to a plate of hyperelastic material. Using this method the propagation of acceleration waves is discussed. Based on this a numerical difference scheme is developed for solving initial-boundary-value problems and applied to two examples: propagation of a point disturbance in a homogeneously finitely strained non-linear elastic plate and geometrical focussing in al linear elastic plate.},
  subject      = {Technische Mechanik},
  language  = {en}
}
@inproceedings{BarekFischerNavratiletal.2006,
  author    = {Barek, Jiri and Fischer, Jan and Navratil, Tomas and Peckova, Karolina and Yosypchuk, Bogdan},
  title     = {Silver solid amalgam electrodes as sensors for chemical carcinogens},
  url       = {http://nbn-resolving.de/urn:nbn:de:hbz:a96-opus-1554},
  year      = {2006},
  abstract  = {The applicability of differential pulse voltammetry (DPV) and adsorptive stripping voltammetry (AdSV) at a non-toxic meniscus-modified silver solid amalgam electrode (m-AgSAE) for the determination of trace amounts of genotoxic substances was demonstrated on the determination of micromolar and submicromolar concentrations of 3-nitrofluoranthene using methanol - 0.01 mol L-1 NaOH (9:1) mixture as a base electrolyte and of Ostazine Orange using 0.01 mol L-1 NaOH as a base electrolyte.},
  subject      = {Biosensor},
  language  = {en}
}
@inproceedings{BaronasIvanauskasKulys2006,
  author    = {Baronas, Romas and Ivanauskas, Feliksas and Kulys, Juozas},
  title     = {Mathematical modeling of biosensors based on an array of enzyme microreactors},
  url       = {http://nbn-resolving.de/urn:nbn:de:hbz:a96-opus-1569},
  year      = {2006},
  abstract  = {This paper presents a two-dimensional-in-space mathematical model of biosensors based on an array of enzyme microreactors immobilised on a single electrode. The modeling system acts under amperometric conditions. The microreactors were modeled by particles and by strips. The model is based on the diffusion equations containing a nonlinear term related to the Michaelis-Menten kinetics of the enzymatic reaction. The model involves three regions: an array of enzyme microreactors where enzyme reaction as well as mass transport by diffusion takes place, a diffusion limiting region where only the diffusion takes place, and a convective region, where the analyte concentration is maintained constant. Using computer simulation, the influence of the geometry of the microreactors and of the diffusion region on the biosensor response was investigated. The digital simulation was carried out using the finite difference technique.},
  subject      = {Biosensor},
  language  = {en}
}
@inproceedings{BassamDigelArtmann2009,
  author    = {Bassam, Rasha and Digel, Ilya and Artmann, Gerhard},
  title     = {Effect of nitric oxide on protein thermal stability : [abstract]},
  year      = {2009},
  abstract  = {As a deduction from these results, we can conclude that proteins mainly in vitro, denaturate totally at a temperature between 57°C -62°C, and they also affected by NO and different ions types. In which mainly, NO cause earlier protein denaturation, which means that, NO has a destabilizing effect on proteins, and also different ions will alter the protein denaturation in which, some ions will cause earlier protein denaturation while others not.},
  subject      = {Stickstoffmonoxid},
  language  = {en}
}
@inproceedings{BhattaraiFrotscherSoraetal.2014,
  author    = {Bhattarai, Aroj and Frotscher, Ralf and Sora, M.-C. and Staat, Manfred},
  title     = {A 3D finite element model of the female pelvic floor for the reconstruction of urinary incontinence},
  series = {11th World Congress on Computational Mechanics (WCCM XI) ; 5th European Conference on Computational Mechanics (ECCM V) ; 6th European Conference on Computational Fluid Dynamics (ECFD VI) ; July 20-25, 2014, Barcelona},
  booktitle = {11th World Congress on Computational Mechanics (WCCM XI) ; 5th European Conference on Computational Mechanics (ECCM V) ; 6th European Conference on Computational Fluid Dynamics (ECFD VI) ; July 20-25, 2014, Barcelona},
  editor    = {Onate, E.},
  organization    = {World Congress on Computational Mechanics <11, 2014, Barcelona>},
  pages     = {1 -- 12},
  year      = {2014},
  language  = {en}
}
@inproceedings{BukhariYang2006,
  author    = {Bukhari, Syed Faisal Ahmed and Yang, Wuqiang},
  title     = {Multi-interface level sensors and new development in monitoring and control of oil separators},
  url       = {http://nbn-resolving.de/urn:nbn:de:hbz:a96-opus-1498},
  year      = {2006},
  abstract  = {In the oil industry, huge saving may be made if suitable multi-interface level measurement systems are employed for effectively monitoring crude oil separators and efficient control of their operation. A number of techniques, e.g. externally mounted displacers, differential pressure transmitters and capacitance rod devices, have been developed to measure the separation process with gas, oil, water and other components. Because of the unavailability of suitable multi-interface level measurement systems, oil separators are currently operated by the trial-and-error approach. In this paper some conventional techniques, which have been used for level measurement in industry, and new development are discussed.},
  subject      = {Biosensor},
  language  = {en}
}
@inproceedings{BurgazziFioriniDeMagistrisetal.1998,
  author    = {Burgazzi, L. and Fiorini, F. and De Magistris, W. (u.a.) and Lensa, W. von and Staat, Manfred and Altes, J.},
  title     = {Reliability Assessment of Passive Safety Systems},
  series = {Proceedings of the 6th International Conference on Nuclear Engineering : ICONE : May 10 - 14, 1998, San Diego, Calif.},
  booktitle = {Proceedings of the 6th International Conference on Nuclear Engineering : ICONE : May 10 - 14, 1998, San Diego, Calif.},
  publisher = {American Society of Mechanical Engineers},
  address   = {New York},
  year      = {1998},
  language  = {en}
}
@inproceedings{ChaiybounTrauteKiesewetteretal.2006,
  author    = {Chaiyboun, Ali and Traute, R{\"u}diger and Kiesewetter, Olaf and Ahlers, Simon and M{\"u}ller, Gerhard and Doll, Theodor},
  title     = {Modular analytical multicomponent analysis in gas sensor arrays},
  url       = {http://nbn-resolving.de/urn:nbn:de:hbz:a96-opus-1358},
  year      = {2006},
  abstract  = {A multi-sensor system is a chemical sensor system which quantitatively and qualitatively records gases with a combination of cross-sensitive gas sensor arrays and pattern recognition software. This paper addresses the issue of data analysis for identification of gases in a gas sensor array. We introduce a software tool for gas sensor array configuration and simulation. It concerns thereby about a modular software package for the acquisition of data of different sensors. A signal evaluation algorithm referred to as matrix method was used specifically for the software tool. This matrix method computes the gas concentrations from the signals of a sensor array. The software tool was used for the simulation of an array of five sensors to determine gas concentration of CH4, NH3, H2, CO and C2H5OH. The results of the present simulated sensor array indicate that the software tool is capable of the following: (a) identify a gas independently of its concentration; (b) estimate the concentration of the gas, even if the system was not previously exposed to this concentration; (c) tell when a gas concentration exceeds a certain value. A gas sensor data base was build for the configuration of the software. With the data base one can create, generate and manage scenarios and source files for the simulation. With the gas sensor data base and the simulation software an on-line Web-based version was developed, with which the user can configure and simulate sensor arrays on-line.},
  subject      = {Biosensor},
  language  = {en}
}
@inproceedings{DachwaldXuFeldmannetal.2011,
  author    = {Dachwald, Bernd and Xu, Changsheng and Feldmann, Marco and Plescher, Engelbert and Digel, Ilya and Artmann, Gerhard},
  title     = {Development and testing of a subsurface probe for detection of life in deep ice : [abstract]},
  year      = {2011},
  abstract  = {We present the novel concept of a combined drilling and melting probe for subsurface ice research. This probe, named "IceMole", is currently developed, built, and tested at the FH Aachen University of Applied Sciences' Astronautical Laboratory. Here, we describe its first prototype design and report the results of its field tests on the Swiss Morteratsch glacier. Although the IceMole design is currently adapted to terrestrial glaciers and ice shields, it may later be modified for the subsurface in-situ investigation of extraterrestrial ice, e.g., on Mars, Europa, and Enceladus. If life exists on those bodies, it may be present in the ice (as life can also be found in the deep ice of Earth).},
  subject      = {Eisschicht},
  language  = {en}
}
@inproceedings{DigelDachwaldArtmannetal.2009,
  author    = {Digel, Ilya and Dachwald, Bernd and Artmann, Gerhard and Linder, Peter and Funke, O.},
  title     = {A concept of a probe for particle analysis and life detection in icy environments},
  year      = {2009},
  abstract  = {A melting probe equipped with autofluorescence-based detection system combined with a light scattering unit, and, optionally, with a microarray chip would be ideally suited to probe icy environments like Europa's ice layer as well as the polar ice layers of Earth and Mars for recent and extinct live.},
  subject      = {Sonde},
  language  = {en}
}
@inproceedings{DigelDemirciTrzewiketal.2004,
  author    = {Digel, Ilya and Demirci, Taylan and Trzewik, J{\"u}rgen and Linder, Peter and Temiz Artmann, Ayseg{\"u}l},
  title     = {Fibroblast response to mechanical stress: role of the adhesion substrate : [abstract]},
  year      = {2004},
  abstract  = {Mechanical stimulation of the cells resulted in evident changes in the cell morphology, protein composition and gene expression. Microscopically, additional formation of stress fibers accompanied by cell re-arrangements in a monolayer was observed. Also, significant activation of p53 gene was revealed as compared to control. Interestingly, the use of CellTech membrane coating induced cell death after mechanical stress had been applied. Such an effect was not detected when fibronectin had been used as an adhesion substrate.},
  subject      = {Fibroblast},
  language  = {en}
}
@inproceedings{DigelLeimenaDachwaldetal.2010,
  author    = {Digel, Ilya and Leimena, W. and Dachwald, Bernd and Linder, Peter and Porst, Dariusz and Kayser, Peter and Funke, O. and Temiz Artmann, Ayseg{\"u}l and Artmann, Gerhard},
  title     = {In-situ biological decontamination of an ice melting probe : [abstract]},
  year      = {2010},
  abstract  = {The objective of our study was to investigate the efficacy of different in-situ decontamination protocols in the conditions of thermo-mechanical ice-melting.},
  subject      = {Sonde},
  language  = {en}
}
@inproceedings{DigelTemizArtmannArtmannetal.2003,
  author    = {Digel, Ilya and Temiz Artmann, Ayseg{\"u}l and Artmann, Gerhard and Nojima, H.},
  title     = {Plasma cluster ions (PCI) influence on microbial cells viability : [abstract]},
  year      = {2003},
  abstract  = {Recently, SHARP corporation has developed the world's first "Plasma Cluster Ions (PCI)" air purification technology, which uses plasma discharge to generate cluster ions. The new plasma cluster device releases into the air positive and negative ions, which are harmless to humans and are able to decompose and deactivate airborne substances by chemical reactions. A lot of phenomenological tests of the PCI air purification technology on microbial cells have been conducted. And, in most cases, it has been shown that PCI demonstrate strongly pronounced killing effect. Although, the particular mechanisms of PCI action are still not evident. We studied variations in resistance to PCI among gram-positive airborne microorganisms, as well as some dose-dependent, spatial, cultural and biochemical properties of PCI action in respect of Staphylococcus spp, Enterococcus spp, Micrococcus spp.},
  subject      = {Clusterion},
  language  = {en}
}
@inproceedings{DigelTemizArtmannNojimaetal.2003,
  author    = {Digel, Ilya and Temiz Artmann, Ayseg{\"u}l and Nojima, H. and Artmann, Gerhard},
  title     = {Effects of plasma generated ions on bacteria : [poster]},
  year      = {2003},
  abstract  = {Summary and Conclusions PCIs were clearly effective in terms of their antibacterial effects with the strains tested. This efficacy increased with the time the bacteries were exposed to PCIs. The bactericidal action has proved to be irreversible. PCIs were significantly less effective in shadowed areas. PCI exposure caused multiple protein damages as observed in SDS PAGE studies. There was no single but multiple molecular mechanism causing the bacterial death.},
  subject      = {Clusterion},
  language  = {en}
}
@inproceedings{DigelTemizArtmannNojimaetal.2003,
  author    = {Digel, Ilya and Temiz Artmann, Ayseg{\"u}l and Nojima, H. and Artmann, Gerhard},
  title     = {Some peculiarities of application of cluster ions generated by plasma in respect of indoor air purification :[abstract]},
  year      = {2003},
  abstract  = {Recently, the SHARP Corporation, Japan, has developed the world's first "Plasma Cluster Ions (PCI)" air purification technology using plasma discharge to generate cluster ions. The new plasma cluster device releases positive and negative ions into the air, which are able to decompose and deactivate harmful airborne substances by chemical reactions. Because cluster ions consist of positive and negative ions that normally exist in the natural world, they are completely harmless and safe to humans. The amount of ozone generated by cluster ions is less than 0.01 ppm, which is significantly less than the 0.05-ppm standard for industrial operations and consumer electronics. This amount, thus, has no harming effects whatsoever on the human body. But particular properties and chemical processes in PCI treatment are still under study. It has been shown that PCI in most cases show strongly pronounced irreversible killing effects in respect of airborne microflora due to free-radical induced reactions and can be considered as a potent technology to disinfect both home, medical and industrial appliances.},
  subject      = {Clusterion},
  language  = {en}
}
@inproceedings{DigelTemizArtmannNojimaetal.2003,
  author    = {Digel, Ilya and Temiz Artmann, Ayseg{\"u}l and Nojima, H. and Artmann, Gerhard},
  title     = {Plasma-generated cluster ions' effects on indoor microflora : [abstract]},
  year      = {2003},
  abstract  = {Recently, SHARP corporation has developed the world's first "Plasma Cluster Ions® (PCI)" air purification technology, which uses plasma discharge to generate cluster ions. The new Plasma Cluster Device releases positive and negative ions into the air, which are harmless to humans and are able to decompose and deactivate airborne substances by chemical reactions. In the past, phenomenological tests on the efficacy of the PCI air purification technology on microbial cells have been conducted. In most cases, it has been shown that PCI demonstrated strongly pronounced killing effects on microorganisms. However, the particular mechanisms of PCI action still have to be uncovered.},
  subject      = {Clusterion},
  language  = {en}
}