@article{FassbenderVogler1992,
  author    = {Faßbender, Heinz and Vogler, Heiko},
  title     = {An implementation of syntax directed functional programming on nested-stack machines},
  series = {Formal Aspects of Computing. 4 (1992), H. 4},
  journal   = {Formal Aspects of Computing. 4 (1992), H. 4},
  isbn      = {0934-5043},
  pages     = {341 -- 375},
  year      = {1992},
  language  = {en}
}
@article{KowalewskiBragardHueningetal.2023,
  author    = {Kowalewski, Paul and Bragard, Michael and H{\"u}ning, Felix and De Doncker, Rik W.},
  title     = {An inexpensive Wiegand-sensor-based rotary encoder without rotating magnets for use in electrical drives},
  series = {IEEE Transactions on Instrumentation and Measurement},
  volume    = {72},
  journal   = {IEEE Transactions on Instrumentation and Measurement},
  publisher = {IEEE},
  address   = {New York},
  issn      = {0018-9456 (Print)},
  doi       = {10.1109/TIM.2023.3326166},
  pages     = {10 Seiten},
  year      = {2023},
  abstract  = {This paper introduces an inexpensive Wiegand-sensor-based rotary encoder that avoids rotating magnets and is suitable for electrical-drive applications. So far, Wiegand-sensor-based encoders usually include a magnetic pole wheel with rotating permanent magnets. These encoders combine the disadvantages of an increased magnet demand and a limited maximal speed due to the centripetal force acting on the rotating magnets. The proposed approach reduces the total demand of permanent magnets drastically. Moreover, the rotating part is manufacturable from a single piece of steel, which makes it very robust and cheap. This work presents the theoretical operating principle of the proposed approach and validates its benefits on a hardware prototype. The presented proof-of-concept prototype achieves a mechanical resolution of 4.5 ° by using only 4 permanent magnets, 2Wiegand sensors and a rotating steel gear wheel with 20 teeth.},
  language  = {en}
}
@article{ZastrowPanagiotopoulos1979,
  author    = {Zastrow, Udo and Panagiotopoulos, P. D.},
  title     = {An integral "Equation" approach to the unilateral contact problem},
  series = {ZAMM - Zeitschrift f{\"u}r angewandte Mathematik und Mechanik. 59 (1979), H. 8},
  journal   = {ZAMM - Zeitschrift f{\"u}r angewandte Mathematik und Mechanik. 59 (1979), H. 8},
  isbn      = {1521-4001},
  pages     = {392 -- 393},
  year      = {1979},
  language  = {en}
}
@inproceedings{ZugNiemuellerHochgeschwenderetal.2017,
  author    = {Zug, Sebastian and Niemueller, Tim and Hochgeschwender, Nico and Seidensticker, Kai and Seidel, Martin and Friedrich, Tim and Neumann, Tobias and Karras, Ulrich and Kraetzschmar, Gerhard K. and Ferrein, Alexander},
  title     = {An Integration Challenge to Bridge the Gap Among Industry-Inspired RoboCup Leagues},
  series = {RoboCup 2016: Robot World Cup XX. RoboCup 2016.},
  booktitle = {RoboCup 2016: Robot World Cup XX. RoboCup 2016.},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-319-68792-6},
  doi       = {10.1007/978-3-319-68792-6_13},
  pages     = {157 -- 168},
  year      = {2017},
  language  = {en}
}
@article{HartungKumwilaisak2004,
  author    = {Hartung, Frank and Kumwilaisak, W.},
  title     = {An intraframe error concealment: nonlinear pattern alignment and directional interpolation / Kumwilaisak, W. ; Hartung, F.},
  series = {Conference on Image Processing, 2004. ICIP '04. 2004 International / Vol. 2 .},
  journal   = {Conference on Image Processing, 2004. ICIP '04. 2004 International / Vol. 2 .},
  pages     = {825 -- 828},
  year      = {2004},
  language  = {en}
}
@inproceedings{AlhwarinSchifferFerreinetal.2019,
  author    = {Alhwarin, Faraj and Schiffer, Stefan and Ferrein, Alexander and Scholl, Ingrid},
  title     = {An Optimized Method for 3D Body Scanning Applications Based on KinectFusion},
  series = {Communications in Computer and Information Science},
  volume    = {1024},
  booktitle = {Communications in Computer and Information Science},
  publisher = {Springer},
  issn      = {1865-0929},
  doi       = {10.1007/978-3-030-29196-9_6},
  pages     = {100 -- 113},
  year      = {2019},
  language  = {en}
}
@inproceedings{HeuermannSadeghfam2016,
  author    = {Heuermann, Holger and Sadeghfam, Arash},
  title     = {Analog Amplitude-Locked Loop Circuit to Support RF Energy Solutions},
  series = {IEEE MTT-S International Microwave Symposium Digest},
  booktitle = {IEEE MTT-S International Microwave Symposium Digest},
  isbn      = {978-150900698-4},
  doi       = {10.1109/MWSYM.2016.7540092},
  pages     = {4 Seiten},
  year      = {2016},
  language  = {de}
}
@incollection{Alt1983,
  author    = {Alt, Helmut},
  title     = {Analog anzeigende Digitaluhr},
  series = {FH-Texte ; 36 : Berichte aus dem Fachbereich Elektrotechnik Aachen},
  booktitle = {FH-Texte ; 36 : Berichte aus dem Fachbereich Elektrotechnik Aachen},
  publisher = {Fachhochschule Aachen},
  address   = {Aachen},
  pages     = {98 -- 104},
  year      = {1983},
  language  = {de}
}
@article{Schuba1999,
  author    = {Schuba, Marko},
  title     = {Analyse der Antwortzeit von zuverl{\"a}ssigen Multicast-Protokollen im Internet},
  series = {Multicast - Protokolle und Anwendungen : 20. - 21. Mai 1999, Braunschweig; 1. GI-Workshop / [Workshop-Leitung: Martina Zitterbart ...]},
  journal   = {Multicast - Protokolle und Anwendungen : 20. - 21. Mai 1999, Braunschweig; 1. GI-Workshop / [Workshop-Leitung: Martina Zitterbart ...]},
  address   = {Braunschweig},
  pages     = {1 -- 14},
  year      = {1999},
  language  = {en}
}
@book{Wosnitza2003,
  author    = {Wosnitza, Franz},
  title     = {Analyse station{\"a}rer, linearer Str{\"o}mungsfelder und Gleichstrom-Netzwerke},
  publisher = {Mainz},
  address   = {Aachen},
  isbn      = {3-86073-546-2},
  pages     = {208 S. : zahlr. graph. Darst.},
  year      = {2003},
  language  = {de}
}
@article{OrzadaBitzJohstetal.2017,
  author    = {Orzada, Stephan and Bitz, Andreas and Johst, S{\"o}ren and Gratz, Marcel and V{\"o}lker, Maximilian N. and Kraff, Oliver and Abuelhaija, Ashraf and Fiedler, Thomas M. and Solbach, Klaus and Quick, Harald H. and Ladd, Mark E.},
  title     = {Analysis of an integrated 8-Channel Tx/Rx body array for use as a body coil in 7-Tesla MRI},
  series = {Frontiers in Physics},
  volume    = {5},
  journal   = {Frontiers in Physics},
  number    = {Jun},
  issn      = {2296-424X},
  doi       = {10.3389/fphy.2017.00017},
  year      = {2017},
  language  = {en}
}
@inproceedings{DinghoferHartung2020,
  author    = {Dinghofer, Kai and Hartung, Frank},
  title     = {Analysis of Criteria for the Selection of Machine Learning Frameworks},
  series = {2020 International Conference on Computing, Networking and Communications (ICNC)},
  booktitle = {2020 International Conference on Computing, Networking and Communications (ICNC)},
  publisher = {IEEE},
  address   = {New York, NY},
  doi       = {10.1109/ICNC47757.2020.9049650},
  pages     = {373 -- 377},
  year      = {2020},
  abstract  = {With the many achievements of Machine Learning in the past years, it is likely that the sub-area of Deep Learning will continue to deliver major technological breakthroughs [1]. In order to achieve best results, it is important to know the various different Deep Learning frameworks and their respective properties. This paper provides a comparative overview of some of the most popular frameworks. First, the comparison methods and criteria are introduced and described with a focus on computer vision applications: Features and Uses are examined by evaluating papers and articles, Adoption and Popularity is determined by analyzing a data science study. Then, the frameworks TensorFlow, Keras, PyTorch and Caffe are compared based on the previously described criteria to highlight properties and differences. Advantages and disadvantages are compared, enabling researchers and developers to choose a framework according to their specific needs.},
  language  = {en}
}
@article{Schuba1999,
  author    = {Schuba, Marko},
  title     = {Analysis of Feedback Error Control Schemes for Block Based Video Communication / Meggers, Jens ; Schuba, Marko},
  year      = {1999},
  language  = {en}
}
@article{PrumePeterRuedigeretal.2005,
  author    = {Prume, Klaus and Peter, F. and R{\"u}diger, A. and Dittmann, R.},
  title     = {Analysis of shape effects on the piezoresponse in ferroelectric nanograins with and without adsorbates / Peter, F. ; R{\"u}diger, A. ; Dittmann, R. ; Waser, R. ; Szot, K. ; Reichenberg, B. ; Prume, K. ;},
  series = {Applied Physics Letters . 87 (2005), H. 8},
  journal   = {Applied Physics Letters . 87 (2005), H. 8},
  isbn      = {0003-6951},
  pages     = {082901 -- 082901-3},
  year      = {2005},
  language  = {en}
}
@inproceedings{CordesGligorevicBlicharski2019,
  author    = {Cordes, Sven and Gligorevic, Snjezana and Blicharski, Peter},
  title     = {Analysis of sine precision influence on DOA estimation using the MUSIC algorithm},
  series = {2019 20th International Radar Symposium (IRS)},
  booktitle = {2019 20th International Radar Symposium (IRS)},
  isbn      = {978-3-7369-9860-5},
  doi       = {10.23919/IRS.2019.8768162},
  pages     = {1 -- 10},
  year      = {2019},
  language  = {en}
}
@techreport{RitzSiekmannWallenborn2014,
  author    = {Ritz, Thomas and Siekmann, Kirsten and Wallenborn, Ramona},
  title     = {Anforderungen an die Gestaltung multimodaler Mobilit{\"a}tsanwendungen : Potenziale f{\"u}r die IT-Branche bei der Organisation der verkehrsmittel{\"u}bergreifenden Mobilit{\"a}t von morgen am Beispiel CarSharing und privater PKW ; Info-Brosch{\"u}re},
  publisher = {eBusiness-Lotse},
  address   = {Aachen},
  pages     = {7 S. : Ill., graph. Darst.},
  year      = {2014},
  abstract  = {Die Informationsbrosch{\"u}re „Anforderungen an die Gestaltung multimodaler Mobilit{\"a}tsanwendungen" richtet sich an IT-Dienstleister. In dieser Brosch{\"u}re werden m{\"o}gliche Potenziale im Bereich des allgemeinen Mobilit{\"a}tsmanagements aufgezeigt. Automobilhersteller vernetzten sich zunehmend mit Technologie-Unternehmen. Es geht nicht nur um die besondere Entwicklung von spezieller Elektronik- und Softwarel{\"o}sungen f{\"u}r Navigations- und Entertainmentsysteme oder auch Fahrassistenz-Systemen in modernen PKW, sondern um einen {\"u}bergreifenden Design- und Interaktionsansatz f{\"u}r miteinander vernetzte Ger{\"a}te.},
  language  = {de}
}
@book{OPUS4-9062,
  title     = {Angewandte Forschung in der Wirtschaftsinformatik},
  editor    = {Wolf, Martin R. and Barton, Thomas and Herrmann, Frank and Meister, Vera G. and M{\"u}ller, Christian and Seel, Christian},
  publisher = {Mana-Buch},
  address   = {Heide},
  isbn      = {978-3-944330-62-4},
  pages     = {259 Seiten},
  year      = {2019},
  language  = {de}
}
@inproceedings{WolfBartonHerrmannetal.2019,
  author    = {Wolf, Martin R. and Barton, Thomas and Herrmann, Frank and Meister, Vera G. and M{\"u}ller, Christian and Seel, Christian},
  title     = {Angewandte Forschung in der Wirtschaftsinformatik 2019 : Tagungsband zur 32. AKWI-Jahrestagung vom 15.09.2019 bis 18.09.2019 an der Fachhochschule f{\"u}r Angewandte Wissenschaften Aachen / hrsg. von Martin R. Wolf, Thomas Barton, Frank Herrmann, Vera G. Meister, Christian M{\"u}ller, Christian Seel},
  publisher = {mana-Buch},
  address   = {Heide},
  isbn      = {978-3-944330-62-4},
  doi       = {10.15771/978-3-944330-62-4},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:526-opus4-13026},
  pages     = {261 Seiten},
  year      = {2019},
  abstract  = {Tagungsbeitr{\"a}ge aus den Bereichen Projektmanagement, Didaktik in der Wirtschaftsinformatik, IT-Sicherheit, Anwendungsf{\"a}lle, Reifegradmodelle, Plattformen f{\"u}r Gesch{\"a}ftsprozesse und Prototypen.},
  language  = {de}
}
@inproceedings{NeesStengelMeisteretal.2020,
  author    = {Nees, Franz and Stengel, Ingo and Meister, Vera G. and Barton, Thomas and Herrmann, Frank and M{\"u}ller, Christian and Wolf, Martin R.},
  title     = {Angewandte Forschung in der Wirtschaftsinformatik 2020 : Tagungsband zur 33. AKWI-Jahrestagung am 14.09.2020, ausgerichtet von der Hochschule Karlsruhe - Wirtschaft und Technik / hrsg. von Franz Nees, Ingo Stengel, Vera G. Meister, Thomas Barton, Frank Herrmann, Christian M{\"u}ller, Martin R. Wolf},
  publisher = {mana-Buch},
  address   = {Heide},
  isbn      = {978-3-944330-66-2},
  doi       = {10.15771/978-3-944330-66-2},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:526-opus4-13840},
  pages     = {147 Seiten},
  year      = {2020},
  abstract  = {Tagungsbeitr{\"a}ge aus den Bereichen KI, Prozessorganisation und Plattformen f{\"u}r Gesch{\"a}ftsprozesse, Sicherheit und Datenschutz sowie Prototypen und Modelle.},
  language  = {de}
}
@book{Czarnecki2023,
  author    = {Czarnecki, Christian},
  title     = {Angewandte Forschung in der Wirtschaftsinformatik 2023 : Tagungsband zur 36. AKWI-Jahrestagung},
  editor    = {Czarnecki, Christian and L{\"u}bbe, Alexander and Meister, Vera G. and M{\"u}ller, Christian and Steglich, Mike and Walther, Mathias},
  organization    = {Arbeitskreis Wirtschaftsinformatik an Hochschulen f{\"u}r Angewandte Wissenschaften im deutschsprachigen Raum (AKWI)},
  doi       = {10.15771/1794},
  pages     = {214 Seiten},
  year      = {2023},
  abstract  = {Beitr{\"a}ge der Fachtagung „Angewandte Forschung in der Wirtschaftsinformatik - Zukunft gestalten" im Rahmen der 36. Jahrestagung des Arbeitskreises Wirtschaftsinformatik an Hochschulen f{\"u}r Angewandte Wissenschaften (AKWI) vom 11. bis 13.09.2023 an der Technischen Hochschule Wildau},
  language  = {de}
}
@book{Alt1979,
  author    = {Alt, Helmut},
  title     = {Angewandte Mathematik, Finanzmathematik, Statistik, Informatik f{\"u}r UPN-Rechner. (Anwendung programmierbarer Taschenrechner ; 1)},
  publisher = {Vieweg},
  address   = {Braunschweig [u.a.]},
  isbn      = {3-528-04150-1},
  pages     = {VIII, 162 S : graph. Darst.},
  year      = {1979},
  language  = {de}
}
@article{Zastrow1979,
  author    = {Zastrow, Udo},
  title     = {Anisotrope Scheiben mit gemischten Randbedingungen},
  series = {ZAMM - Zeitschrift f{\"u}r Angewandte Mathematik und Mechanik. 59 (1979), H. 5},
  journal   = {ZAMM - Zeitschrift f{\"u}r Angewandte Mathematik und Mechanik. 59 (1979), H. 5},
  isbn      = {1521-4001},
  pages     = {T218 -- T219},
  year      = {1979},
  language  = {de}
}
@inproceedings{ArndtConzenElsenetal.2023,
  author    = {Arndt, Tobias and Conzen, Max and Elsen, Ingo and Ferrein, Alexander and Galla, Oskar and K{\"o}se, Hakan and Schiffer, Stefan and Tschesche, Matteo},
  title     = {Anomaly detection in the metal-textile industry for the reduction of the cognitive load of quality control workers},
  series = {PETRA '23: Proceedings of the 16th International Conference on PErvasive Technologies Related to Assistive Environments},
  booktitle = {PETRA '23: Proceedings of the 16th International Conference on PErvasive Technologies Related to Assistive Environments},
  publisher = {ACM},
  isbn      = {9798400700699},
  doi       = {10.1145/3594806.3596558},
  pages     = {535 -- 542},
  year      = {2023},
  abstract  = {This paper presents an approach for reducing the cognitive load for humans working in quality control (QC) for production processes that adhere to the 6σ -methodology. While 100\% QC requires every part to be inspected, this task can be reduced when a human-in-the-loop QC process gets supported by an anomaly detection system that only presents those parts for manual inspection that have a significant likelihood of being defective. This approach shows good results when applied to image-based QC for metal textile products.},
  language  = {en}
}
@phdthesis{Elsen2000,
  author    = {Elsen, Ingo},
  title     = {Ansichtenbasierte 3D-Objekterkennung mit erweiterten selbstorganisierenden Merkmalskarten},
  publisher = {VDI-Verlag},
  address   = {D{\"u}sseldorf},
  isbn      = {978-3-18-363110-0},
  issn      = {0341-1796},
  pages     = {VIII, 140 S. : Ill., graph. Darst.},
  year      = {2000},
  language  = {de}
}
@article{LepersJaegerPuetter1977,
  author    = {Lepers, Heinrich and J{\"a}ger, G. and P{\"u}tter, L.},
  title     = {Anwendung eines Prozessmodells zur Regelung der Produktqualit{\"a}t bei der Zementklinker-Herstellung / Jaeger, G. ; Lepers, H. Puetter, L. [u.a.]},
  series = {VDI-Berichte (1977)},
  journal   = {VDI-Berichte (1977)},
  pages     = {87 -- 93},
  year      = {1977},
  language  = {de}
}
@article{EllerwegRitzSchuhmann2009,
  author    = {Ellerweg, Roland and Ritz, Thomas and Schuhmann, Stefan},
  title     = {Anwendungsentwicklung f{\"u}r iPhone und Windows Mobile : ein bisschen von allem},
  series = {iX : Magazin f{\"u}r professionelle Informationstechnik},
  journal   = {iX : Magazin f{\"u}r professionelle Informationstechnik},
  number    = {3},
  issn      = {0935-9680 (Print)},
  pages     = {132 -- 135},
  year      = {2009},
  language  = {de}
}
@inproceedings{WittigRuettersBragard2024,
  author    = {Wittig, M. and R{\"u}tters, Ren{\´e} and Bragard, Michael},
  title     = {Application of RL in control systems using the example of a rotatory inverted pendulum},
  series = {Tagungsband AALE 2024 : Fit f{\"u}r die Zukunft: praktische L{\"o}sungen f{\"u}r die industrielle Automation},
  booktitle = {Tagungsband AALE 2024 : Fit f{\"u}r die Zukunft: praktische L{\"o}sungen f{\"u}r die industrielle Automation},
  editor    = {Reiff-Stephan, J{\"o}rg and J{\"a}kel, Jens and Schwarz, Andr{\´e}},
  publisher = {le-tex publishing services GmbH},
  address   = {Leipzig},
  isbn      = {978-3-910103-02-3},
  doi       = {10.33968/2024.53},
  pages     = {241 -- 248},
  year      = {2024},
  abstract  = {In this paper, the use of reinforcement learning (RL) in control systems is investigated using a rotatory inverted pendulum as an example. The control behavior of an RL controller is compared to that of traditional LQR and MPC controllers. This is done by evaluating their behavior under optimal conditions, their disturbance behavior, their robustness and their development process. All the investigated controllers are developed using MATLAB and the Simulink simulation environment and later deployed to a real pendulum model powered by a Raspberry Pi. The RL algorithm used is Proximal Policy Optimization (PPO). The LQR controller exhibits an easy development process, an average to good control behavior and average to good robustness. A linear MPC controller could show excellent results under optimal operating conditions. However, when subjected to disturbances or deviations from the equilibrium point, it showed poor performance and sometimes instable behavior. Employing a nonlinear MPC Controller in real time was not possible due to the high computational effort involved. The RL controller exhibits by far the most versatile and robust control behavior. When operated in the simulation environment, it achieved a high control accuracy. When employed in the real system, however, it only shows average accuracy and a significantly greater performance loss compared to the simulation than the traditional controllers. With MATLAB, it is not yet possible to directly post-train the RL controller on the Raspberry Pi, which is an obstacle to the practical application of RL in a prototyping or teaching setting. Nevertheless, RL in general proves to be a flexible and powerful control method, which is well suited for complex or nonlinear systems where traditional controllers struggle.},
  language  = {en}
}
@article{FassbenderBuehler1999,
  author    = {Faßbender, Heinz and B{\"u}hler, Gerhard},
  title     = {Applying Ada, Java and CORBA for making a command and control information system platform independent},
  series = {Proceedings : (SIGAda '99) ; October 17 - 21, 1999 ; Crowne Plaza, Redondo Beach \& Marine Hotel, Redondo Beach, CA, USA / ACM SIGAda Annual International Conference},
  journal   = {Proceedings : (SIGAda '99) ; October 17 - 21, 1999 ; Crowne Plaza, Redondo Beach \& Marine Hotel, Redondo Beach, CA, USA / ACM SIGAda Annual International Conference},
  publisher = {ACM},
  address   = {New York, NY},
  isbn      = {1-58113-127-5},
  pages     = {83 -- 88},
  year      = {1999},
  language  = {en}
}
@incollection{EggertZaehlWolfetal.2023,
  author    = {Eggert, Mathias and Z{\"a}hl, Philipp M. and Wolf, Martin R. and Haase, Martin},
  title     = {Applying leaderboards for quality improvement in software development projects},
  series = {Software Engineering for Games in Serious Contexts},
  booktitle = {Software Engineering for Games in Serious Contexts},
  editor    = {Cooper, Kendra M.L. and Bucchiarone, Antonio},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-031-33337-8 (Print)},
  doi       = {10.1007/978-3-031-33338-5_11},
  pages     = {243 -- 263},
  year      = {2023},
  abstract  = {Software development projects often fail because of insufficient code quality. It is now well documented that the task of testing software, for example, is perceived as uninteresting and rather boring, leading to poor software quality and major challenges to software development companies. One promising approach to increase the motivation for considering software quality is the use of gamification. Initial research works already investigated the effects of gamification on software developers and come to promising. Nevertheless, a lack of results from field experiments exists, which motivates the chapter at hand. By conducting a gamification experiment with five student software projects and by interviewing the project members, the chapter provides insights into the changing programming behavior of information systems students when confronted with a leaderboard. The results reveal a motivational effect as well as a reduction of code smells.},
  language  = {en}
}
@article{FerreinDyllaLakemeyeretal.2008,
  author    = {Ferrein, Alexander and Dylla, Frank and Lakemeyer, Gerhard and Murray, Jan},
  title     = {Approaching a formal soccer theory from behaviour specifications in robotic soccer / Dylla, Frank ; Ferrein, Alexander ; Lakemeyer, Gerhard ; Murray, Jan ; Obst, Oliver ; R{\"o}fer, Thomas ; Schiffer, Stefan ; Stolzenburg, Frieder ; Visser, Ubbo ; Wagner, Tho},
  series = {Computers in sport / editors: P Dabnichki},
  journal   = {Computers in sport / editors: P Dabnichki},
  publisher = {WIT Press},
  address   = {Southampton},
  isbn      = {978-1-8456-4064-4},
  pages     = {161 -- 185},
  year      = {2008},
  language  = {en}
}
@book{Hoever2013,
  author    = {Hoever, Georg},
  title     = {Arbeitsbuch h{\"o}here Mathematik : Aufgaben mit vollst{\"a}ndig durchgerechneten L{\"o}sungen},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-642-30336-4},
  pages     = {XII, 524 S.},
  year      = {2013},
  language  = {de}
}
@incollection{LuczakWolfMuehlfelder2001,
  author    = {Luczak, Holger and Wolf, Martin R. and M{\"u}hlfelder, M.},
  title     = {Arbeitswissenschaft},
  series = {CSCW-Kompendium : Lehr- und Handbuch zum computerunterst{\"u}tzten kooperativen Arbeiten ; mit 9 Tabellen},
  booktitle = {CSCW-Kompendium : Lehr- und Handbuch zum computerunterst{\"u}tzten kooperativen Arbeiten ; mit 9 Tabellen},
  editor    = {Schwabe, Gerhard},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-540-67552-5},
  doi       = {10.1007/978-3-642-56848-0_2},
  pages     = {7 -- 14},
  year      = {2001},
  abstract  = {Unter Arbeit wird das T{\"a}tigsein des Menschen verstanden, bei dem dieser mit anderen Menschen und (technischen) Hilfsmitteln in Interaktion tritt, um unter wirtschaftlichen Zielsetzungen G{\"u}ter und Dienstleistungen zu erstellen (Luczak, 1998a). Arbeit dient direkt oder indirekt der Erhaltung der eigenen Existenz und der Existenz der Gesellschaft. Arbeit ist deshalb eine besondere Form des T{\"a}tigseins neben anderen wie Spiel, Sport, Lemen usw.},
  language  = {de}
}
@inproceedings{DammRahierRitzetal.2013,
  author    = {Damm, Sebastian and Rahier, Michael and Ritz, Thomas and Sch{\"a}fer, Thomas},
  title     = {Architecture for platform- and hardware-independent mesh networks : how to unify the channels},
  series = {ICSNC 2013 : The Eighth International Conference on Systems and Networks Communications ; October 27, 2013 to October 31, 2013, Venice Italy},
  booktitle = {ICSNC 2013 : The Eighth International Conference on Systems and Networks Communications ; October 27, 2013 to October 31, 2013, Venice Italy},
  editor    = {Davoli, Renzo},
  publisher = {Curran Associates},
  address   = {Red Hook, NY},
  isbn      = {978-1-61208-305-6},
  pages     = {131 -- 134},
  year      = {2013},
  abstract  = {This paper will prove that mesh networks among different platforms and hardware channels can help to channel valuable information even if public telecommunication infrastructure is not available due to arbitrary reasons. Therefore, results of a simulation for mesh networks on mass events will be provided, followed by the developed architecture and an outlook on future research. The developed architecture is currently being implemented and field tested on mass events.},
  language  = {en}
}
@book{Fassbender2003,
  author    = {Faßbender, Heinz},
  title     = {Architektur eines F{\"u}hrungsinformationssystems unter Verwendung von Enterprise Java Beans},
  publisher = {FGAN-FKIE},
  address   = {Wachtberg},
  year      = {2003},
  language  = {de}
}
@book{Fassbender1999,
  author    = {Faßbender, Heinz},
  title     = {Architektur eines plattformunabh{\"a}ngigen verteilten F{\"u}hrungsinformationssystems},
  publisher = {FGAN-FKIE},
  address   = {Wachtberg},
  year      = {1999},
  language  = {de}
}
@book{Mayer2001,
  author    = {Mayer, Claudia},
  title     = {Art : from prehistoric art to modernism / [Text: Claudia Mayer-Iswandy]},
  publisher = {DuMont},
  address   = {K{\"o}ln},
  isbn      = {3-7701-7048-2},
  pages     = {[19] S. : zahlr. Ill. + Beil. (19 S.)},
  year      = {2001},
  language  = {en}
}
@inproceedings{StoebeHoefkenSchubaetal.2013,
  author    = {St{\"o}be, Rolf and H{\"o}fken, Hans-Wilhelm and Schuba, Marko and Breuer, Michael},
  title     = {Artificial ageing of mobile devices using a simulated GSM/GPRS network},
  series = {Eighth International Conference on Availability, Reliability and Security (ARES) : 2-6 Sept. 2013, Regensburg},
  booktitle = {Eighth International Conference on Availability, Reliability and Security (ARES) : 2-6 Sept. 2013, Regensburg},
  publisher = {IEEE},
  pages     = {493 -- 497},
  year      = {2013},
  language  = {en}
}
@inproceedings{SchaenzleAltherrEdereretal.2015,
  author    = {Sch{\"a}nzle, Christian and Altherr, Lena and Ederer, Thorsten and Lorenz, Ulf and Pelz, Peter F.},
  title     = {As good as it can be: Ventilation system design by a combined scaling and discrete optimization method},
  series = {Proceedings of FAN 2015},
  booktitle = {Proceedings of FAN 2015},
  pages     = {1 -- 11},
  year      = {2015},
  abstract  = {The understanding that optimized components do not automatically lead to energy-efficient systems sets the attention from the single component on the entire technical system. At TU Darmstadt, a new field of research named Technical Operations Research (TOR) has its origin. It combines mathematical and technical know-how for the optimal design of technical systems. We illustrate our optimization approach in a case study for the design of a ventilation system with the ambition to minimize the energy consumption for a temporal distribution of diverse load demands. By combining scaling laws with our optimization methods we find the optimal combination of fans and show the advantage of the use of multiple fans.},
  language  = {en}
}
@inproceedings{NiemuellerLakemeyerFerrein2013,
  author    = {Niem{\"u}ller, Tim and Lakemeyer, Gerhard and Ferrein, Alexander},
  title     = {Aspects of integrating diverse software into robotic systems extended abstract},
  series = {ICRA 2013 - 8th Workshop on Software Development and Integration in Robotics (SDIR), Karlsruhe, Germany},
  booktitle = {ICRA 2013 - 8th Workshop on Software Development and Integration in Robotics (SDIR), Karlsruhe, Germany},
  pages     = {1 -- 2},
  year      = {2013},
  language  = {en}
}
@article{Mayer1991,
  author    = {Mayer, Claudia},
  title     = {Aspekte der Wiedervereinigung in der aktuellen deutschen Literatur.},
  series = {Forum Deutsch : Informationen, Meinungen, Materialien und Tips f{\"u}r kanadische Deutschlehrer / St{\"a}ndige Konferenz kanadischer Deutschlehrer (1991)},
  journal   = {Forum Deutsch : Informationen, Meinungen, Materialien und Tips f{\"u}r kanadische Deutschlehrer / St{\"a}ndige Konferenz kanadischer Deutschlehrer (1991)},
  pages     = {16 -- 22},
  year      = {1991},
  language  = {de}
}
@inproceedings{LorenzAltherrPelz2020,
  author    = {Lorenz, Imke-Sophie and Altherr, Lena and Pelz, Peter F.},
  title     = {Assessing and Optimizing the Resilience of Water Distribution Systems Using Graph-Theoretical Metrics},
  series = {Operations Research Proceedings 2019},
  booktitle = {Operations Research Proceedings 2019},
  editor    = {Neufeld, Janis S. and Buscher, Udo and Lasch, Rainer and M{\"o}st, Dominik and Sch{\"o}nberger, J{\"o}rn},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-48439-2},
  doi       = {10.1007/978-3-030-48439-2_63},
  pages     = {521 -- 527},
  year      = {2020},
  abstract  = {Water distribution systems are an essential supply infrastructure for cities. Given that climatic and demographic influences will pose further challenges for these infrastructures in the future, the resilience of water supply systems, i.e. their ability to withstand and recover from disruptions, has recently become a subject of research. To assess the resilience of a WDS, different graph-theoretical approaches exist. Next to general metrics characterizing the network topology, also hydraulic and technical restrictions have to be taken into account. In this work, the resilience of an exemplary water distribution network of a major German city is assessed, and a Mixed-Integer Program is presented which allows to assess the impact of capacity adaptations on its resilience.},
  language  = {en}
}
@inproceedings{BitzKraffOrzadaetal.2012,
  author    = {Bitz, Andreas and Kraff, O. and Orzada, S. and Maderwald, S. and Brote, I. and Johst, S. and Ladd, E.},
  title     = {Assessment of RF Safety of Transmit Coils at 7 Tesla by Experimental and Numerical Procedures (490.)},
  series = {19th annual ISMRM scientific meeting and exhibition 2011 : Montreal, Quebec, Canada, 7 - 13 May 2011},
  booktitle = {19th annual ISMRM scientific meeting and exhibition 2011 : Montreal, Quebec, Canada, 7 - 13 May 2011},
  number    = {Volume 1},
  publisher = {Curran},
  address   = {Red Hook, NY},
  isbn      = {978-1-61839-284-8},
  pages     = {475},
  year      = {2012},
  language  = {en}
}
@article{HoffmannRohrbachUhletal.2022,
  author    = {Hoffmann, Andreas and Rohrbach, Felix and Uhl, Matthias and Ceblin, Maximilian and Bauer, Thomas and Mallah, Marcel and Jacob, Timo and Heuermann, Holger and Kuehne, Alexander J. C.},
  title     = {Atmospheric pressure plasma-jet treatment of polyacrylonitrile-nonwovens—Stabilization and roll-to-roll processing},
  series = {Journal of Applied Polymer Science},
  volume    = {139},
  journal   = {Journal of Applied Polymer Science},
  number    = {37},
  publisher = {Wiley},
  issn      = {0021-8995 (Print)},
  doi       = {10.1002/app.52887},
  pages     = {1 -- 9},
  year      = {2022},
  abstract  = {Carbon nanofiber nonwovens represent a powerful class of materials with prospective application in filtration technology or as electrodes with high surface area in batteries, fuel cells, and supercapacitors. While new precursor-to-carbon conversion processes have been explored to overcome productivity restrictions for carbon fiber tows, alternatives for the two-step thermal conversion of polyacrylonitrile precursors into carbon fiber nonwovens are absent. In this work, we develop a continuous roll-to-roll stabilization process using an atmospheric pressure microwave plasma jet. We explore the influence of various plasma-jet parameters on the morphology of the nonwoven and compare the stabilized nonwoven to thermally stabilized samples using scanning electron microscopy, differential scanning calorimetry, and infrared spectroscopy. We show that stabilization with a non-equilibrium plasma-jet can be twice as productive as the conventional thermal stabilization in a convection furnace, while producing electrodes of comparable electrochemical performance.},
  language  = {en}
}
@article{Mayer1992,
  author    = {Mayer, Claudia},
  title     = {Auf dem Holzweg zur Wasserstelle. {\"O}kologischer Tourismus auf der Karibik-Insel St. John},
  series = {Frankfurter Rundschau. 81 (1992), H. 14},
  journal   = {Frankfurter Rundschau. 81 (1992), H. 14},
  pages     = {M5 -- M5},
  year      = {1992},
  language  = {de}
}
@article{KlingeWilkeMuehl2012,
  author    = {Klinge, Uwe and Wilke, Ralf and M{\"u}hl, Thomas},
  title     = {Auswahl der Herniennetze nach der "effektiven Porosit{\"a}t" - warum das Gewicht weniger wichtig ist},
  series = {Chirurgische Allgemeine : CHAZ ; Zeitung f{\"u}r Klinik und Praxis},
  volume    = {13},
  journal   = {Chirurgische Allgemeine : CHAZ ; Zeitung f{\"u}r Klinik und Praxis},
  number    = {12},
  publisher = {Kaden},
  address   = {Mannheim},
  isbn      = {1615-5378},
  pages     = {297 -- 301},
  year      = {2012},
  language  = {de}
}
@article{HeuermannStolleSchiek1995,
  author    = {Heuermann, Holger and Stolle, Reinhard and Schiek, Burkhard},
  title     = {Auswertemethoden zur Praezisions-Entfernungsmessung mit FMCW-Systemen und deren Anwendung im Mikrowellenbereich},
  series = {tm - Technisches Messen. 62. 1995 (1995), H. 2},
  journal   = {tm - Technisches Messen. 62. 1995 (1995), H. 2},
  pages     = {66 -- 73},
  year      = {1995},
  language  = {de}
}
@article{Alt1983,
  author    = {Alt, Helmut},
  title     = {Auswertung von Belastungskennlinien},
  series = {Elektrizit{\"a}tswirtschaft},
  volume    = {Bd. 82},
  journal   = {Elektrizit{\"a}tswirtschaft},
  issn      = {0013-5496},
  pages     = {208 -- 210},
  year      = {1983},
  language  = {de}
}
@article{Alt1974,
  author    = {Alt, Helmut},
  title     = {Auswertung von Pr{\"u}fungsergebnissen auf elektronischen Rechenanlagen},
  series = {Angewandte Informatik},
  volume    = {16},
  journal   = {Angewandte Informatik},
  number    = {5},
  publisher = {Vieweg},
  address   = {Braunschweig},
  issn      = {0013-5704},
  pages     = {219 -- 222},
  year      = {1974},
  language  = {de}
}
@article{SchlamannYoonMaderwaldetal.2009,
  author    = {Schlamann, M. and Yoon, M.-S. and Maderwald, S. and Pietrzyk, T. and Bitz, Andreas and Gerwig, M. and Forsting, M. and Ladd, S. C. and Ladd, M. E. and Kastrup, O.},
  title     = {Auswirkungen der Magnetresonanztomografie auf die Elektrophysiologie des motorischen Kortex: eine Studie mit transkranieller Magnetstimulation},
  series = {R{\"o}Fo - Fortschritte auf dem Giebiet der R{\"o}ntgenstrahlen und der bildgebenden Verfahren},
  volume    = {181},
  journal   = {R{\"o}Fo - Fortschritte auf dem Giebiet der R{\"o}ntgenstrahlen und der bildgebenden Verfahren},
  number    = {3},
  publisher = {Thieme},
  address   = {Stuttgart},
  issn      = {1438-9029},
  doi       = {10.1055/s-0028-1109038},
  pages     = {215 -- 219},
  year      = {2009},
  language  = {de}
}
@book{EngelsDoegeLierathetal.1998,
  author    = {Engels, Elmar and Doege, E. and Lierath, F. and Meyer, F.},
  title     = {Automatisierte Maximierung der Produktionshubzahl bei Schnell{\"a}uferpressen mittels Fuzzy-Regler : [Abschlußbericht] / Verf.: Friedhelm Lierath ... ; Doege, E. ; Meyer, F. ; Engels, E.},
  publisher = {EFB},
  address   = {Hannover},
  pages     = {118 S : Ill., graph. Darst.},
  year      = {1998},
  language  = {de}
}
@article{Ferrein2004,
  author    = {Ferrein, Alexander},
  title     = {Autonome Entscheidungsfindung bei Robotern : Planwirtschaft},
  series = {Linux-Magazin},
  journal   = {Linux-Magazin},
  number    = {7},
  issn      = {1432-640X (Print)},
  pages     = {50 -- 53},
  year      = {2004},
  language  = {de}
}
@article{Benkner1995,
  author    = {Benkner, Thorsten},
  title     = {Autonomous Slot Assignment Schemes for PRMA++ Third Generation TDMA Systems},
  series = {Proceedings / Organization: IEEE Vehicular Technology/Communications Society; Joint Chapter in the Benelux Section and Telecommunications Division, Eindhoven University of Technology, The Netherlands. Ed.: Peter Smulders},
  journal   = {Proceedings / Organization: IEEE Vehicular Technology/Communications Society; Joint Chapter in the Benelux Section and Telecommunications Division, Eindhoven University of Technology, The Netherlands. Ed.: Peter Smulders},
  publisher = {Techn. Univ. Eindhoven, Telecommunications Div.},
  address   = {Eindhoven},
  isbn      = {9061449928},
  pages     = {209 S.},
  year      = {1995},
  language  = {en}
}
@inproceedings{RokitanskyEhammerGraeupletal.2007,
  author    = {Rokitansky, Carl-Herbert and Ehammer, Max and Gr{\"a}upl, Thomas and Schnell, Michael and Brandes, Sinja and Gligorevic, Snjezana and Rihacek, Christoph and Sajatovic, Miodrag},
  title     = {B-AMC a system for future broadband aeronautical multi-carrier communications in the L-BAND},
  series = {IEEE/AIAA 26th Digital Avionics Systems Conference ; DASC '07 ; 21 - 25 Oct. 2007, Dallas, Texas},
  booktitle = {IEEE/AIAA 26th Digital Avionics Systems Conference ; DASC '07 ; 21 - 25 Oct. 2007, Dallas, Texas},
  organization    = {Institute of Electrical and Electronics Engineers},
  isbn      = {978-1-4244-1108-5},
  pages     = {4D2-1 -- 4D2-13},
  year      = {2007},
  language  = {en}
}
@inproceedings{RokitanskyEhammerGraeupletal.2007,
  author    = {Rokitansky, Carl-Herbert and Ehammer, Max and Gr{\"a}upl, Thomas and Schnell, Michael and Brandes, Sinja and Gligorevic, Snjezana and Rihacek, Christoph and Sajatovic, Miodrag},
  title     = {B-AMC - Aeronautical Broadband Communication in the L-Band},
  series = {First CEAS European Air and Space Conference : Motto: century perspectives : Deutscher Luft-und Raumfahrtkongress 2007 : 10-13 September 2007 in Berlin, Germany. (Jahrbuch der Deutschen Gesellschaft f{\"u}r Luft- und Raumfahrt 2007 ; Bd. 1-5. - Enth.: Jahrbuch der Deutschen Gesellschaft f{\"u}r Luft- und Raumfahrt 2006 ; Bd. 3)},
  booktitle = {First CEAS European Air and Space Conference : Motto: century perspectives : Deutscher Luft-und Raumfahrtkongress 2007 : 10-13 September 2007 in Berlin, Germany. (Jahrbuch der Deutschen Gesellschaft f{\"u}r Luft- und Raumfahrt 2007 ; Bd. 1-5. - Enth.: Jahrbuch der Deutschen Gesellschaft f{\"u}r Luft- und Raumfahrt 2006 ; Bd. 3)},
  publisher = {Deutschen Gesellschaft f{\"u}r Luft- und Raumfahrt},
  address   = {Bonn},
  organization    = {European Air and Space Conference <1, 2007, Berlin>},
  issn      = {0070-4083},
  pages     = {487 -- 496},
  year      = {2007},
  language  = {en}
}
@inproceedings{OPUS4-6272,
  title     = {B-AMC — broadband aeronautical multi-carrier communications},
  series = {Integrated Communications, Navigation and Surveillance Conference : [ICNS 2008] ; Bethesda, Md., 5 - 7 May 2008},
  booktitle = {Integrated Communications, Navigation and Surveillance Conference : [ICNS 2008] ; Bethesda, Md., 5 - 7 May 2008},
  organization    = {Institute of Electrical and Electronics Engineers},
  isbn      = {978-1-4244-2303-3 ; 978-1-4244-2304-0},
  pages     = {1 -- 12},
  year      = {2008},
  language  = {en}
}
@inproceedings{GligorevicBrandesCosovicetal.2005,
  author    = {Gligorevic, Snjezana and Brandes, Sinja and Cosovic, I. and Schnell, Michael},
  title     = {B-VHF, ein 'Overlay'-System f{\"u}r die ATC Kommunikation im VHF Band},
  series = {Motto: Luft- und Raumfahrt - Grenzen {\"u}berwinden, Horizonte erweitern : Deutscher Luft- und Raumfahrtkongress 2005, Friedrichshafen, 26. bis 29. September 2005},
  booktitle = {Motto: Luft- und Raumfahrt - Grenzen {\"u}berwinden, Horizonte erweitern : Deutscher Luft- und Raumfahrtkongress 2005, Friedrichshafen, 26. bis 29. September 2005},
  publisher = {DGLR},
  address   = {Bonn},
  organization    = {Deutsche Gesellschaft f{\"u}r Luft- und Raumfahrt - Lilienthal-Oberth},
  pages     = {951 -- 958},
  year      = {2005},
  language  = {de}
}
@article{SchubaHoefken2012,
  author    = {Schuba, Marko and H{\"o}fken, Hans},
  title     = {Backtrack5: Datensammlung und Reporterstellung f{\"u}r Pentester mit MagicTree / H{\"o}fken, Hans ; Schuba, Marko},
  series = {Hakin9. 73 (2012), H. 3},
  journal   = {Hakin9. 73 (2012), H. 3},
  publisher = {-},
  isbn      = {1733-7186},
  pages     = {12 -- 16},
  year      = {2012},
  language  = {de}
}
@article{Mayer1990,
  author    = {Mayer, Claudia},
  title     = {Bali. Bl{\"u}teninsel im Indischen Ozean. Reisebericht},
  series = {Fliegende Bl{\"a}tter / Condor (1990)},
  journal   = {Fliegende Bl{\"a}tter / Condor (1990)},
  pages     = {61 -- 64},
  year      = {1990},
  language  = {de}
}
@inproceedings{BitzAlaydrusStreckertetal.2001,
  author    = {Bitz, Andreas and Alaydrus, M. and Streckert, J. and Hansen, V.W.},
  title     = {Base station antennas embedded in complex environments: rf exposure in controlled areas},
  series = {23rd BEMS Annual Meeting, St. Paul, Minnesota, USA, 49-50, June 2001},
  booktitle = {23rd BEMS Annual Meeting, St. Paul, Minnesota, USA, 49-50, June 2001},
  publisher = {Bioelectromagnetics Society},
  address   = {Frederick, MD},
  pages     = {49 -- 50},
  year      = {2001},
  language  = {en}
}
@article{Zastrow1985,
  author    = {Zastrow, Udo},
  title     = {Basic geometrical singularities in plane-elasticity and plate-bending problems},
  series = {International Journal of Solids and Structures. 21 (1985), H. 10},
  journal   = {International Journal of Solids and Structures. 21 (1985), H. 10},
  isbn      = {0020-7683},
  pages     = {1047 -- 1067},
  year      = {1985},
  language  = {en}
}
@article{HagemannIhrig1980,
  author    = {Hagemann, Hans-J{\"u}rgen and Ihrig, H.},
  title     = {BaTiO3 dotiert mit 3d-Ionen: Valenzen, Leerstellen und ihre Auswirkungen. Hagemann, H. J.; Ihrig, H.},
  series = {Philips - Unsere Forschung in Deutschland / Hrsg.: Philips Forschungslaboratorium GmbH Aachen und Hamburg. 3 (1980)},
  journal   = {Philips - Unsere Forschung in Deutschland / Hrsg.: Philips Forschungslaboratorium GmbH Aachen und Hamburg. 3 (1980)},
  pages     = {249 -- 252},
  year      = {1980},
  language  = {de}
}
@book{Wosnitza1976,
  author    = {Wosnitza, Franz},
  title     = {Bau eines HF-Empfangsteiles, Bild-Ton-ZF-Verst{\"a}rkers und Demodulators, sowie eines Bildtr{\"a}gertonempfangsteiles f{\"u}r Schmalbandfernsehen f{\"u}r den ATV-Fernsehumsetzer DK 0 HJ / Betreuer: Erich Vogelsang},
  year      = {1976},
  language  = {de}
}
@article{KrauseSchaerli1993,
  author    = {Krause, Gregor and Sch{\"a}rli, U.},
  title     = {Bedingungen f{\"u}r das Auftreten von Kippschwingungen bei Hochspannungswandlern im Netz},
  year      = {1993},
  language  = {de}
}
@phdthesis{Alt1975,
  author    = {Alt, Helmut},
  title     = {Beitrag zur Spannungs-Blindleistungsregelung mit gesteuerten Netzkennlinien},
  address   = {Aachen},
  pages     = {163 S.},
  year      = {1975},
  language  = {de}
}
@article{MuehlKrausPeiferetal.2005,
  author    = {M{\"u}hl, Thomas and Kraus, E. and Peifer, Hermann-Josef and Obolenski, B.},
  title     = {Bekleidungstextilien mit elektromagnetischer Schirmwirkung},
  series = {Technische Textilien. 48 (2005), H. 2},
  journal   = {Technische Textilien. 48 (2005), H. 2},
  isbn      = {0323-3243},
  pages     = {160 -- 163},
  year      = {2005},
  language  = {de}
}
@article{GspandlPillReipetal.2011,
  author    = {Gspandl, Stephan and Pill, Ingo and Reip, Michael and Steinbauer, Gerald and Ferrein, Alexander},
  title     = {Belief Management for High-Level Robot Programs},
  series = {Proceedings of the Twenty-Second International Joint Conference on Artificial Intelligence [electronic resource] : Barcelona, Catalonia, Spain, 16 - 22 July 2011 / sponsored by International Joint Conferences on Artificial Intelligence (IJCAI) and the Association for the Advancement of Artificial Intelligence (AAAI). Ed. by Toby Walsh},
  journal   = {Proceedings of the Twenty-Second International Joint Conference on Artificial Intelligence [electronic resource] : Barcelona, Catalonia, Spain, 16 - 22 July 2011 / sponsored by International Joint Conferences on Artificial Intelligence (IJCAI) and the Association for the Advancement of Artificial Intelligence (AAAI). Ed. by Toby Walsh},
  pages     = {900 -- 905},
  year      = {2011},
  language  = {en}
}
@article{RensFerrein2013,
  author    = {Rens, Gavin and Ferrein, Alexander},
  title     = {Belief-node condensation for online POMDP algorithms},
  publisher = {IEEE},
  address   = {New York},
  pages     = {1 -- 7},
  year      = {2013},
  abstract  = {Slightly extended version of the paper accepted at the Robotics and Artificial Intelligence Workshop, a special track of IEEE AFRICON-2013, held in Mauritius, 9-12 September 2013},
  language  = {en}
}
@article{Alt2002,
  author    = {Alt, Helmut},
  title     = {Belieferung von Kunden in fremden Netzgebieten},
  series = {EW : das Magazin f{\"u}r die Energie-Wirtschaft},
  volume    = {Bd. 101},
  journal   = {EW : das Magazin f{\"u}r die Energie-Wirtschaft},
  number    = {H. 1/2},
  issn      = {0013-5496},
  pages     = {26 -- 35},
  year      = {2002},
  language  = {de}
}
@article{Alt2000,
  author    = {Alt, Helmut},
  title     = {Benchmark der Netznutzungspreise},
  series = {Energiewirtschaftliche Tagesfragen : et ; Zeitschrift f{\"u}r Energiewirtschaft, Recht, Technik und Umwelt},
  volume    = {Bd. 50},
  journal   = {Energiewirtschaftliche Tagesfragen : et ; Zeitschrift f{\"u}r Energiewirtschaft, Recht, Technik und Umwelt},
  number    = {H. 11},
  issn      = {0013-743X},
  pages     = {846 -- 850},
  year      = {2000},
  language  = {de}
}
@incollection{NiemuellerLakemeyerReuteretal.2017,
  author    = {Niemueller, T. and Lakemeyer, G. and Reuter, S. and Jeschke, S. and Ferrein, Alexander},
  title     = {Benchmarking of Cyber-Physical Systems in Industrial Robotics: The RoboCup Logistics League as a CPS Benchmark Blueprint},
  series = {Cyber-Physical Systems: Foundations, Principles and Applications},
  booktitle = {Cyber-Physical Systems: Foundations, Principles and Applications},
  publisher = {Academic Press},
  address   = {London},
  doi       = {10.1016/B978-0-12-803801-7.00013-4},
  pages     = {193 -- 207},
  year      = {2017},
  abstract  = {In the future, we expect manufacturing companies to follow a new paradigm that mandates more automation and autonomy in production processes. Such smart factories will offer a variety of production technologies as services that can be combined ad hoc to produce a large number of different product types and variants cost-effectively even in small lot sizes. This is enabled by cyber-physical systems that feature flexible automated planning methods for production scheduling, execution control, and in-factory logistics. During development, testbeds are required to determine the applicability of integrated systems in such scenarios. Furthermore, benchmarks are needed to quantify and compare system performance in these industry-inspired scenarios at a comprehensible and manageable size which is, at the same time, complex enough to yield meaningful results. In this chapter, based on our experience in the RoboCup Logistics League (RCLL) as a specific example, we derive a generic blueprint for how a holistic benchmark can be developed, which combines a specific scenario with a set of key performance indicators as metrics to evaluate the overall integrated system and its components.},
  language  = {de}
}
@article{SchulteTiggesFoersterNikolovskietal.2022,
  author    = {Schulte-Tigges, Joschua and F{\"o}rster, Marco and Nikolovski, Gjorgji and Reke, Michael and Ferrein, Alexander and Kaszner, Daniel and Matheis, Dominik and Walter, Thomas},
  title     = {Benchmarking of various LiDAR sensors for use in self-driving vehicles in real-world environments},
  series = {Sensors},
  volume    = {22},
  journal   = {Sensors},
  number    = {19},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {1424-8220},
  doi       = {10.3390/s22197146},
  pages     = {20 Seiten},
  year      = {2022},
  abstract  = {Abstract In this paper, we report on our benchmark results of the LiDAR sensors Livox Horizon, Robosense M1, Blickfeld Cube, Blickfeld Cube Range, Velodyne Velarray H800, and Innoviz Pro. The idea was to test the sensors in different typical scenarios that were defined with real-world use cases in mind, in order to find a sensor that meet the requirements of self-driving vehicles. For this, we defined static and dynamic benchmark scenarios. In the static scenarios, both LiDAR and the detection target do not move during the measurement. In dynamic scenarios, the LiDAR sensor was mounted on the vehicle which was driving toward the detection target. We tested all mentioned LiDAR sensors in both scenarios, show the results regarding the detection accuracy of the targets, and discuss their usefulness for deployment in self-driving cars.},
  language  = {en}
}
@incollection{SchneiderWisselinkCzarneckietal.2024,
  author    = {Schneider, Dominik and Wisselink, Frank and Czarnecki, Christian and N{\"o}lle, Nikolai},
  title     = {Benefits and framework conditions for information-driven business models concerning the Internet of Things},
  series = {Digitalization in companies},
  booktitle = {Digitalization in companies},
  publisher = {Springer},
  address   = {Wiesbaden},
  isbn      = {978-3-658-39093-8 (Print)},
  doi       = {10.1007/978-3-658-39094-5_5},
  pages     = {59 -- 75},
  year      = {2024},
  abstract  = {In the context of the increasing digitalization, the Internet of Things (IoT) is seen as a technological driver through which completely new business models can emerge in the interaction of different players. Identified key players include traditional industrial companies, municipalities and telecommunications companies. The latter, by providing connectivity, ensure that small devices with tiny batteries can be connected almost anywhere and directly to the Internet. There are already many IoT use cases on the market that provide simplification for end users, such as Philips Hue Tap. In addition to business models based on connectivity, there is great potential for information-driven business models that can support or enhance existing business models. One example is the IoT use case Park and Joy, which uses sensors to connect parking spaces and inform drivers about available parking spaces in real time. Information-driven business models can be based on data generated in IoT use cases. For example, a telecommunications company can add value by deriving more decision-relevant information - called insights - from data that is used to increase decision agility. In addition, insights can be monetized. The monetization of insights can only be sustainable, if careful attention is taken and frameworks are considered. In this chapter, the concept of information-driven business models is explained and illustrated with the concrete use case Park and Joy. In addition, the benefits, risks and framework conditions are discussed.},
  language  = {en}
}
@inproceedings{DammRitzStrauch2010,
  author    = {Damm, Sebastian and Ritz, Thomas and Strauch, Jakob},
  title     = {Benutzerzentrierte Anforderungsanalyse f{\"u}r die Produktlinien-Entwicklung mobiler Unternehmenssoftware},
  series = {EMISA 2010 : Einflussfaktoren auf die Entwicklung flexibler, integrierter Informationssysteme ; Beitr{\"a}ge des Workshops der GI-Fachgruppe Entwicklungsmethoden f{\"u}r Informationssysteme und deren Anwendung (EMISA), 07. - 08.10.2010 in Karlsruhe, Germany. - (GI-Edition : Proceedings ; 172)},
  booktitle = {EMISA 2010 : Einflussfaktoren auf die Entwicklung flexibler, integrierter Informationssysteme ; Beitr{\"a}ge des Workshops der GI-Fachgruppe Entwicklungsmethoden f{\"u}r Informationssysteme und deren Anwendung (EMISA), 07. - 08.10.2010 in Karlsruhe, Germany. - (GI-Edition : Proceedings ; 172)},
  editor    = {Klink, Stefan},
  publisher = {Ges. f{\"u}r Informatik},
  address   = {Bonn},
  isbn      = {978-3-88579-266-6},
  pages     = {117 -- 130},
  year      = {2010},
  language  = {de}
}
@article{RitzEllerweg2008,
  author    = {Ritz, Thomas and Ellerweg, Roland},
  title     = {Benutzerzentrierte Entwicklung mobiler Unternehmenssoftware, Teil 1},
  series = {dot.NET-Magazin},
  volume    = {2008},
  journal   = {dot.NET-Magazin},
  number    = {11},
  issn      = {1619-7933},
  year      = {2008},
  language  = {de}
}
@article{RitzEllerweg2008,
  author    = {Ritz, Thomas and Ellerweg, Roland},
  title     = {Benutzerzentrierte Entwicklung mobiler Unternehmenssoftware, Teil 2 : die Iterative Entwicklung},
  series = {dot.net-magazin},
  volume    = {2008},
  journal   = {dot.net-magazin},
  number    = {12},
  issn      = {1619-7933},
  year      = {2008},
  language  = {de}
}
@book{Zastrow1979,
  author    = {Zastrow, Udo},
  title     = {Berechnung von anisotropen Scheiben mit gemischten Randbedingungen durch singulaere Integralgleichungen},
  year      = {1979},
  language  = {de}
}
@article{Muehl1988,
  author    = {M{\"u}hl, Thomas},
  title     = {Berechnung von Lichtintensit{\"a}tsverteilungen in streuenden Medien},
  pages     = {129 S. : Ill., graph. Darst.},
  year      = {1988},
  language  = {de}
}
@article{Mayer1995,
  author    = {Mayer, Claudia},
  title     = {Between Resistance and Affirmation: Christa Wolf and German Unification},
  series = {Canadian review of comparative literature : CRCL = Revue canadienne de litt{\´e}rature compar{\´e}e / Canadian Comparative Literature Association. 22 (1995), H. 3-4},
  journal   = {Canadian review of comparative literature : CRCL = Revue canadienne de litt{\´e}rature compar{\´e}e / Canadian Comparative Literature Association. 22 (1995), H. 3-4},
  isbn      = {0319-051X},
  pages     = {813 -- 835},
  year      = {1995},
  language  = {en}
}
@article{Mayer1993,
  author    = {Mayer, Claudia},
  title     = {Between Trans- and Interdisciplinarity. »Germanistik« and the Dialectic of Inclusion and Exclusion of the Other(s)},
  series = {Language and literature today : proceedings of the XIXth triennal congress of the International Federation for Modern Languages and Literatures ; Bras{\´i}lia 22 - 30 August 1993. General ed. Neide de Faria.},
  journal   = {Language and literature today : proceedings of the XIXth triennal congress of the International Federation for Modern Languages and Literatures ; Bras{\´i}lia 22 - 30 August 1993. General ed. Neide de Faria.},
  publisher = {Univ.},
  address   = {Brasilia},
  isbn      = {85-230-0405-x},
  pages     = {958 -- 966},
  year      = {1993},
  language  = {en}
}
@techreport{BirmansTamborninoUllrich2024,
  type      = {Working Paper},
  author    = {Birmans, Katrin and Tambornino, Philipp and Ullrich, Anna Valentine},
  title     = {Bevor Sie Coscine nutzen - Handreichung f{\"u}r Forschende an HAW},
  doi       = {10.5281/zenodo.12158546},
  pages     = {2 Seiten},
  year      = {2024},
  abstract  = {Um die Forschungsdatenmanagement-Plattform Coscine optimal f{\"u}r Forschungsprojekte nutzen zu k{\"o}nnen, ist es sinnvoll, einige Fragen im Vorhinein zu kl{\"a}ren. So k{\"o}nnen aufwendige {\"A}nderungen der Datenverwaltung im Nachhinein vermieden werden. Hierzu bietet die Handreichung hilfreiche Leitfragen und Erl{\"a}uterungen f{\"u}r Forschende und FDM-Service-Personal an HAW in NRW (DH.NRW-Hochschulen). FDM-Service-Mitarbeitende k{\"o}nnen die Handreichung in ihrer Beratung zu Coscine einsetzen und mit der Eingabemaske in der Kopfzeile des Dokuments auf ihre Hochschule anpassen.},
  language  = {de}
}
@book{SchollLehmannSpitzer1996,
  author    = {Scholl, Ingrid and Lehmann, Thomas [Hrsg.] and Spitzer, Klaus [Hrsg.]},
  title     = {Bildverarbeitung f{\"u}r die Medizin : Algorithmen - Systeme - Anwendungen ; proceedings des Aachener Workshops am 8. und 9. November 1996 / Institut f{\"u}r Medizinische Informatik und Biometrie der RWTH Aachen. Hrsg. von Thomas Lehmann ; Ingrid Scholl ; Klaus Spitzer},
  publisher = {Verlag der Augustinus-Buchhandlung},
  address   = {Aachen},
  isbn      = {3-86073-519-5},
  pages     = {XIII, 427 S. : Ill., graph. Darst.},
  year      = {1996},
  language  = {de}
}
@article{HagebeukerLangeRingbeck2004,
  author    = {Hagebeuker, Bianca and Lange, Robert and Ringbeck, Thorsten},
  title     = {Bildverarbeitung mit der dritten Dimension : wenn die Pixel auch Laufzeiten auswerten},
  series = {Sensor-Report : Sensorik, Messtechnik, Bildverarbeitung, Fabrikautomation. - 2004, H. 2},
  journal   = {Sensor-Report : Sensorik, Messtechnik, Bildverarbeitung, Fabrikautomation. - 2004, H. 2},
  publisher = {Rek \& Thomas},
  address   = {St. Gallen},
  issn      = {0179-9592},
  pages     = {11 -- 17},
  year      = {2004},
  language  = {de}
}
@article{HeuermannErkens2004,
  author    = {Heuermann, Holger and Erkens, Holger},
  title     = {Blocking structures for mixed-mode systems. / Erkens, Holger ; Heuermann, Holger},
  series = {Conference proceedings : Tuesday 12th, Wednesday 13th and Thursday 14th October, [RAI International Exhibition and Congress Centre, Amsterdam ; part of European Microwave Week 2004] / EuMA, European Microwave Association. Vol. 1},
  journal   = {Conference proceedings : Tuesday 12th, Wednesday 13th and Thursday 14th October, [RAI International Exhibition and Congress Centre, Amsterdam ; part of European Microwave Week 2004] / EuMA, European Microwave Association. Vol. 1},
  publisher = {Horizon House Publ.},
  address   = {London},
  isbn      = {1-580-53992-0},
  pages     = {297 -- 300},
  year      = {2004},
  language  = {en}
}
@article{ZastrowRieder1980,
  author    = {Zastrow, Udo and Rieder, G.},
  title     = {Bracketing eigenvalues of an oscillating elastic body by integral equations},
  series = {Bracketing of eigenfrequencies of continous structures : Euromech Colloquium, no. 112, M{\´a}traf{\"u}red (Hungary), 21 - 23 February, 1979 / ed. by {\`A}. Bosznay},
  journal   = {Bracketing of eigenfrequencies of continous structures : Euromech Colloquium, no. 112, M{\´a}traf{\"u}red (Hungary), 21 - 23 February, 1979 / ed. by {\`A}. Bosznay},
  publisher = {Akad. Kiad{\´o}},
  address   = {Budapest},
  isbn      = {963-05-2625-5},
  pages     = {421 -- 434},
  year      = {1980},
  language  = {en}
}
@incollection{Krause2001,
  author    = {Krause, Gregor},
  title     = {Brenchmarking elektrischer Energie in Zweckbauten - Aussagef{\"a}higkeit von Energiekennzahlen},
  series = {Betriebliches Energiemanagement : Tagung Cottbus, 6. und 7. M{\"a}rz 2001. (VDI-Berichte ; 1593)},
  booktitle = {Betriebliches Energiemanagement : Tagung Cottbus, 6. und 7. M{\"a}rz 2001. (VDI-Berichte ; 1593)},
  publisher = {VDI-Verlag},
  address   = {D{\"u}sseldorf},
  isbn      = {3180915935},
  pages     = {413 -- 422},
  year      = {2001},
  language  = {de}
}
@inproceedings{SajatovicRihacekHaindletal.2007,
  author    = {Sajatovic, Miodrag and Rihacek, Christoph and Haindl, Bernhard and Schnell, Michael and Brandes, Sinja and Gligorevic, Snjezana},
  title     = {Broadband VHF (B-VHF) project achievements and follow-on activities},
  series = {Integrated Communications, Navigation and Surveillance Conference : Herndon, VA, 1 - 3 May 2007},
  booktitle = {Integrated Communications, Navigation and Surveillance Conference : Herndon, VA, 1 - 3 May 2007},
  organization    = {Institute of Electrical and Electronics Engineers},
  isbn      = {1-4244-1216-1},
  pages     = {1 -- 8},
  year      = {2007},
  language  = {en}
}
@misc{Czarnecki2020,
  author    = {Czarnecki, Christian},
  title     = {Buchbesprechung : Anwendungsorientierte Wirtschaftsinformatik - Strategische Planung, Entwicklung und Nutzung von Informationssystemen},
  series = {Anwendungen und Konzepte der Wirtschaftsinformatik (AKWI-Journal)},
  journal   = {Anwendungen und Konzepte der Wirtschaftsinformatik (AKWI-Journal)},
  publisher = {Technische Hochschule Wildau},
  address   = {Wildau},
  issn      = {2296-4592},
  doi       = {10.26034/lu.akwi.2020.3264},
  pages     = {101 -- 101},
  year      = {2020},
  language  = {de}
}
@misc{HeuermannHueningWache2018,
  author    = {Heuermann, Holger and H{\"u}ning, Felix and Wache, Franz-Josef},
  title     = {Bussystem sowie Kommunikationsverfahren},
  year      = {2018},
  abstract  = {Die Erfindung betrifft ein Bussystem enthaltend Busleitungen, an denen eine Anzahl von Busteilnehmern {\"u}ber einen Transceiver anschließbar sind, wobei der Transceiver eine bidirektionale Kommunikation zwischen mindestens zwei Busteilnehmern bewirkt, wobei auf einer busabgewandten Seite des Transceivers sich an denselben eine Zwischenbr{\"u}ckeneinheit anschließt, die mindestens zwei Sender-/Empf{\"a}nger-Paare enthaltend jeweils einen Sender und einen Empf{\"a}nger aufweist, wobei der Sender einen Senderoszillator, eine Amplituden- und/oder Phasen- und/oder Frequenzmodulator sowie eine Antenne aufweist und wobei der Empf{\"a}nger einen Mischer aufweisenden Demodulator sowie eine Antenne aufweist, wobei ein erstes Sender-/Empf{\"a}nger-Paar {\"u}ber eine Funkschnittstelle mit dem zweiten Sender-/Empf{\"a}nger-Paar miteinander gekoppelt sind.},
  language  = {de}
}
@article{SchifferFerreinLakemeyer2012,
  author    = {Schiffer, Stefan and Ferrein, Alexander and Lakemeyer, Gerhard},
  title     = {Caesar: an intelligent domestic service robot},
  series = {Intelligent service robotics},
  volume    = {5},
  journal   = {Intelligent service robotics},
  number    = {4},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1861-2776},
  doi       = {10.1007/s11370-012-0118-y},
  pages     = {259 -- 276},
  year      = {2012},
  abstract  = {In this paper we present CAESAR, an intelligent domestic service robot. In domestic settings for service robots complex tasks have to be accomplished. Those tasks benefit from deliberation, from robust action execution and from flexible methods for human-robot interaction that account for qualitative notions used in natural language as well as human fallibility. Our robot CAESAR deploys AI techniques on several levels of its system architecture. On the low-level side, system modules for localization or navigation make, for instance, use of path-planning methods, heuristic search, and Bayesian filters. For face recognition and human-machine interaction, random trees and well-known methods from natural language processing are deployed. For deliberation, we use the robot programming and plan language READYLOG, which was developed for the high-level control of agents and robots; it allows combining programming the behaviour using planning to find a course of action. READYLOG is a variant of the robot programming language Golog. We extended READYLOG to be able to cope with qualitative notions of space frequently used by humans, such as "near" and "far". This facilitates human-robot interaction by bridging the gap between human natural language and the numerical values needed by the robot. Further, we use READYLOG to increase the flexible interpretation of human commands with decision-theoretic planning. We give an overview of the different methods deployed in CAESAR and show the applicability of a system equipped with these AI techniques in domestic service robotics},
  language  = {en}
}
@article{Heuermann2008,
  author    = {Heuermann, Holger},
  title     = {Calibration of a Network Analyzer Without a Thru Connection for Nonlinear and Multiport Measurements},
  series = {IEEE Transactions on Microwave Theory and Techniques. 56 (2008), H. 11, 1},
  journal   = {IEEE Transactions on Microwave Theory and Techniques. 56 (2008), H. 11, 1},
  isbn      = {0018-9480},
  pages     = {2505 -- 2510},
  year      = {2008},
  language  = {en}
}
@article{ClaerFerreinSchiffer2019,
  author    = {Claer, Mario and Ferrein, Alexander and Schiffer, Stefan},
  title     = {Calibration of a Rotating or Revolving Platform with a LiDAR Sensor},
  series = {Applied Sciences},
  volume    = {Volume 9},
  journal   = {Applied Sciences},
  number    = {issue 11, 2238},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {2076-3417},
  doi       = {10.3390/app9112238},
  pages     = {18 Seiten},
  year      = {2019},
  language  = {en}
}
@article{HeuermannSchiek1994,
  author    = {Heuermann, Holger and Schiek, Burkhard},
  title     = {Calibration of network analyser measurements with leakage errors},
  series = {Electronics letters. 30 (1994), H. 1},
  journal   = {Electronics letters. 30 (1994), H. 1},
  isbn      = {0013-5194},
  pages     = {52 -- 53},
  year      = {1994},
  language  = {en}
}
@article{Heuermann1999,
  author    = {Heuermann, Holger},
  title     = {Calibration procedures with series impedances and unknown lines simplify on-wafer measurements},
  series = {IEEE transactions on microwave theory and techniques : MTT ; a publication of the IEEE Microwave Theory and Techniques Society. 47 (1999), H. 1},
  journal   = {IEEE transactions on microwave theory and techniques : MTT ; a publication of the IEEE Microwave Theory and Techniques Society. 47 (1999), H. 1},
  isbn      = {0018-9480},
  pages     = {1 -- 5},
  year      = {1999},
  language  = {en}
}
@article{SchoppDollGraeseretal.2016,
  author    = {Schopp, Christoph and Doll, Timo and Gr{\"a}ser, Ulrich and Harzheim, Thomas and Heuermann, Holger and Kling, Rainer and Marso, Michael},
  title     = {Capacitively Coupled High-Pressure Lamp Using Coaxial Line Networks},
  series = {IEEE Transactions on Microwave Theory and Techniques},
  volume    = {64},
  journal   = {IEEE Transactions on Microwave Theory and Techniques},
  number    = {10},
  publisher = {IEEE},
  address   = {New York, NY},
  issn      = {0018-9480},
  doi       = {10.1109/TMTT.2016.2600326},
  pages     = {3363 -- 3368},
  year      = {2016},
  abstract  = {This paper describes the development of a capacitively coupled high-pressure lamp with input power between 20 and 43 W at 2.45 GHz, using a coaxial line network. Compared with other electrodeless lamp systems, no cavity has to be used and a reduction in the input power is achieved. Therefore, this lamp is an alternative to the halogen incandescent lamp for domestic lighting. To serve the demands of domestic lighting, the filling of the lamp is optimized over all other resulting requirements, such as high efficacy at low induced powers and fast startups. A workflow to develop RF-driven plasma applications is presented, which makes use of the hot S-parameter technique. Descriptions of the fitting process inside a circuit and FEM simulator are given. Results of the combined ignition and operation network from simulations and measurements are compared. An initial prototype is built and measurements of the lamp's lighting properties are presented along with an investigation of the efficacy optimizations using large signal amplitude modulation. With this lamp, an efficacy of 135 lmW -1 is achieved.},
  language  = {en}
}
@article{vonKnobelsdorfBrenkenhoffFrauenrathProthmannetal.2010,
  author    = {von Knobelsdorf-Brenkenhoff, Florian and Frauenrath, Tobias and Prothmann, Marcel and Dieringer, Matthias A. and Hezel, Fabian and Renz, Wolfgang and Kretschel, Kerstin and Niendorf, Thoralf and Schulz-Menger, Jeanette},
  title     = {Cardiac chamber quantification using magnetic resonance imaging at 7 Tesla—a pilot study},
  volume    = {20},
  publisher = {Springer},
  address   = {Berlin, Heidelberg},
  issn      = {0938-7994},
  doi       = {10.1007/s00330-010-1888-2},
  pages     = {2844 -- 2852},
  year      = {2010},
  abstract  = {Objectives Interest in cardiovascular magnetic resonance (CMR) at 7 T is motivated by the expected increase in spatial and temporal resolution, but the method is technically challenging. We examined the feasibility of cardiac chamber quantification at 7 T. Methods A stack of short axes covering the left ventricle was obtained in nine healthy male volunteers. At 1.5 T, steady-state free precession (SSFP) and fast gradient echo (FGRE) cine imaging with 7 mm slice thickness (STH) were used. At 7 T, FGRE with 7 mm and 4 mm STH were applied. End-diastolic volume, end-systolic volume, ejection fraction and mass were calculated. Results All 7 T examinations provided excellent blood/myocardium contrast for all slice directions. No significant difference was found regarding ejection fraction and cardiac volumes between SSFP at 1.5 T and FGRE at 7 T, while volumes obtained from FGRE at 1.5 T were underestimated. Cardiac mass derived from FGRE at 1.5 and 7 T was larger than obtained from SSFP at 1.5 T. Agreement of volumes and mass between SSFP at 1.5 T and FGRE improved for FGRE at 7 T when combined with an STH reduction to 4 mm. Conclusions This pilot study demonstrates that cardiac chamber quantification at 7 T using FGRE is feasible and agrees closely with SSFP at 1.5 T.},
  language  = {en}
}
@misc{LindelGreiserWaxmanetal.2012,
  author    = {Lindel, Tomasz Dawid and Greiser, Andreas and Waxman, Patrick and Dietterle, Martin and Seifert, Frank and Fontius, Ulrich and Renz, Wolfgang and Dieringer, Matthias A. and Frauenrath, Tobias and Schulz-Menger, Jeanette and Niendorf, Thoralf and Ittermann, Bernd},
  title     = {Cardiac CINE MRI at 7 T using a transmit array},
  series = {2012 ISMRM Annual Meeting Proceedings},
  journal   = {2012 ISMRM Annual Meeting Proceedings},
  issn      = {1545-4428},
  year      = {2012},
  abstract  = {With its need for high SNR and short acquisition times, Cardiac MRI (CMR) is an intriguing target application for ultrahigh field MRI. Due to the sheer size of the upper torso, however, the known RF issues of 7T MRI are also most prominent in CMR. Recent years brought substantial progress but the full potential of the ultrahigh field for CMR is yet to be exploited. Parallel transmission (pTx) is a promising approach in this context and several groups have already reported B1 shimming for 7T CMR. In such a static pTx application amplitudes and phases of all Tx channels are adjusted individually but otherwise imaging techniques established in current clinical practice 1.5 T and 3 T are applied. More advanced forms of pTx as spatially selective excitation (SSE) using Transmit SENSE promise additional benefits like faster imaging with reduced fields of view or improved SAR control. SSE requires the full dynamic capabilities of pTx, however, and for the majority of today's implemented pTx hardware the internal synchronization of the Tx array does not easily permit external triggering as needed for CMR. Here we report a software solution to this problem and demonstrate the feasibility of CINE CMR at 7 T using a Tx array.},
  language  = {en}
}
@misc{TkachenkovonKnobelsdorffBrenkenhoffKleindienstetal.2012,
  author    = {Tkachenko, Valeriy and von Knobelsdorff-Brenkenhoff, Florian and Kleindienst, Denise and Winter, Lukas and Rieger, Jan and Frauenrath, Tobias and Dieringer, Matthias A. and Santoro, Davide and Niendorf, Thoralf and Schulz-Menger, Jeanette},
  title     = {Cardiovasular MR at 7Tesla: assessment of the right ventricle},
  series = {2012 ISMRM Annual Meeting Proceedings},
  journal   = {2012 ISMRM Annual Meeting Proceedings},
  issn      = {1545-4428},
  year      = {2012},
  abstract  = {The assessment of the right ventricle (RV) is a challenge in today's cardiology, but of growing clinical impact regarding patient prognosis in different cardiac diseases. The detection and differentiation of small wall motion abnormalities may help to enhance the differentiation of cardiomyopathies including Arrhythmogenic Rightventricular Cardiomyopathy. Cardiovascular magnetic resonance (CMR) at 1.5T is the accepted gold standard for RV quantification. The higher spatial resolution achievable at ultrahigh field strength (UHF) offers the potential to gain new insights into the structure and function of the RV. To approach this goal accurate RV chamber quantification at 7T has to be proven. Consequently this study examines the feasibility of assessment of RV dimensions and function at 7T using improved spatial resolution enabled by the intrinsic sensitivity gain of UHF CMR. For this purpose, a dedicated 16 channel TX/RX RF coil array is used together with 2D CINE fast gradient echo (FGRE) imaging. For comparison RV chamber quantification is conducted at 1.5T using a SSFP based state of the art clinical protocol.},
  language  = {en}
}
@misc{NoetzoldBragardFinketal.2014,
  author    = {N{\"o}tzold, K. and Bragard, Michael and Fink, K. and Griessel, R. and Wegener, R.},
  title     = {Cascaded H-bridge converter with transformer based cell power balancing in each voltage level : [Patentschrift]},
  publisher = {Europ{\"a}isches Patentamt / United States Patent and Trademark Office [u.a.]},
  address   = {Den Haag / Alexandria, VA},
  pages     = {16 S. : graph. Darst.},
  year      = {2014},
  language  = {en}
}
@inproceedings{SchifferBragard2019,
  author    = {Schiffer, Fabian and Bragard, Michael},
  title     = {Cascaded LQ and Field-Oriented Control of a Mobile Inverse Pendulum (Segway) with Permanent Magnet Synchronous Machines},
  series = {2019 20th International Conference on Research and Education in Mechatronics (REM)},
  booktitle = {2019 20th International Conference on Research and Education in Mechatronics (REM)},
  isbn      = {978-1-5386-9257-8},
  doi       = {10.1109/REM.2019.8744101},
  pages     = {1 -- 8},
  year      = {2019},
  language  = {en}
}
@article{HagemannHenningsWernicke1984,
  author    = {Hagemann, Hans-J{\"u}rgen and Hennings, D. and Wernicke, R.},
  title     = {Ceramic multilayer capacitors. Hagemann, H. J.; Hennings, D.; Wernicke, R.},
  series = {Philips' technical review / Philips' Gloeilampenfabrieken. Philips' Gloeilampenfabrieken <Eindhoven>. 41 (1984)},
  journal   = {Philips' technical review / Philips' Gloeilampenfabrieken. Philips' Gloeilampenfabrieken <Eindhoven>. 41 (1984)},
  isbn      = {0031-7926},
  pages     = {89 -- 98},
  year      = {1984},
  language  = {en}
}