@article{BienerSasse1993,
  author    = {Biener, Ernst and Sasse, T.},
  title     = {Herstellen von Deponieabdichtungen in ung{\"u}nstigen Witterungsperioden},
  series = {Standard-Abdichtungssysteme f{\"u}r Deponiebauwerke : Seminarunterlagen},
  journal   = {Standard-Abdichtungssysteme f{\"u}r Deponiebauwerke : Seminarunterlagen},
  publisher = {Haus der Technik, Essen},
  address   = {Essen},
  pages     = {1 -- 17},
  year      = {1993},
  language  = {de}
}
@article{BienerSasse1990,
  author    = {Biener, Ernst and Sasse, T.},
  title     = {Herstellen von Deponiedichtungen in ung{\"u}nstigen Witterungsperioden},
  series = {Altlastensanierung '90 : Dritter Internationaler KFK-TNO-Kongreß {\"u}ber Altlastensanierung ; 10. - 14. Dezember 1990, Karlsruhe, Bundesrepublik Deutschland / Hrsg.: F. Arendt ... - Bd. 2},
  journal   = {Altlastensanierung '90 : Dritter Internationaler KFK-TNO-Kongreß {\"u}ber Altlastensanierung ; 10. - 14. Dezember 1990, Karlsruhe, Bundesrepublik Deutschland / Hrsg.: F. Arendt ... - Bd. 2},
  publisher = {Kluwer},
  address   = {Dordrecht [u.a.]},
  isbn      = {0-7923-1059-4},
  pages     = {1387 -- 1388},
  year      = {1990},
  language  = {de}
}
@article{OertelBung2021,
  author    = {Oertel, Mario and Bung, Daniel Bernhard},
  title     = {Hochwasserschutz - eine Aufgabe f{\"u}r eine nachhaltige Wasserwirtschaft},
  series = {Wasserwirtschaft},
  volume    = {111},
  journal   = {Wasserwirtschaft},
  number    = {9-10},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  issn      = {0043-0978},
  pages     = {3 -- 19},
  year      = {2021},
  language  = {de}
}
@article{ErpicumCrookstonBombardellietal.2021,
  author    = {Erpicum, Sebastien and Crookston, Brian M. and Bombardelli, Fabian and Bung, Daniel Bernhard and Felder, Stefan and Mulligan, Sean and Oertel, Mario and Palermo, Michele},
  title     = {Hydraulic structures engineering: An evolving science in a changing world},
  series = {Wires Water},
  volume    = {8},
  journal   = {Wires Water},
  number    = {2},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {2049-1948},
  doi       = {10.1002/wat2.1505},
  year      = {2021},
  language  = {en}
}
@article{BienerSasse1990,
  author    = {Biener, Ernst and Sasse, T.},
  title     = {Hydraulische Maßnahmen zur Altlastensanierung},
  series = {Behandlung und Sicherung von Abfalldeponien und Altlasten : [Seminar] / Technische Akademie Wuppertal},
  journal   = {Behandlung und Sicherung von Abfalldeponien und Altlasten : [Seminar] / Technische Akademie Wuppertal},
  publisher = {Technische Akademie Wuppertal},
  address   = {Wuppertal},
  pages     = {1 -- 10},
  year      = {1990},
  language  = {de}
}
@article{BienerKonertz1994,
  author    = {Biener, Ernst and Konertz, Klaus},
  title     = {In Grund und Boden saniert / Konertz, Klaus ; Ernst Biener},
  series = {Baugewerbe : das Magazin f{\"u}r erfolgreiche Bauunternehmer. 74 (1994), H. 19},
  journal   = {Baugewerbe : das Magazin f{\"u}r erfolgreiche Bauunternehmer. 74 (1994), H. 19},
  isbn      = {0005-6634},
  pages     = {41 -- 45},
  year      = {1994},
  language  = {de}
}
@article{KuhnhenneRegerPyschnyetal.2020,
  author    = {Kuhnhenne, Markus and Reger, Vitali and Pyschny, Dominik and D{\"o}ring, Bernd},
  title     = {Influence of airtightness of steel sandwich panel joints on heat losses},
  series = {E3S Web of Conferences 12th Nordic Symposium on Building Physics (NSB 2020)},
  volume    = {172},
  journal   = {E3S Web of Conferences 12th Nordic Symposium on Building Physics (NSB 2020)},
  number    = {Art. 05008},
  publisher = {EDP Sciences},
  address   = {Les Ulis},
  doi       = {10.1051/e3sconf/202017205008},
  pages     = {6},
  year      = {2020},
  abstract  = {Energy saving ordinances requires that buildings must be designed in such a way that the heat transfer surface including the joints is permanently air impermeable. The prefabricated roof and wall panels in lightweight steel constructions are airtight in the area of the steel covering layers. The sealing of the panel joints contributes to fulfil the comprehensive requirements for an airtight building envelope. To improve the airtightness of steel sandwich panels, additional sealing tapes can be installed in the panel joint. The influence of these sealing tapes was evaluated by measurements carried out by the RWTH Aachen University - Sustainable Metal Building Envelopes. Different installation situations were evaluated by carrying out airtightness tests for different joint distances. In addition, the influence on the heat transfer coefficient was also evaluated using the Finite Element Method (FEM). The combination of obtained air volume flow and transmission losses enables to create an "effective heat transfer coefficient" due to transmission and infiltration. This summarizes both effects in one value and is particularly helpful for approximate calculations on energy efficiency.},
  language  = {en}
}
@article{OertelBung2012,
  author    = {Oertel, Mario and Bung, Daniel Bernhard},
  title     = {Initial stage of two-dimensional dam-break waves: laboratory versus VOF},
  series = {Journal of hydraulic research},
  volume    = {50},
  journal   = {Journal of hydraulic research},
  number    = {1},
  publisher = {Taylor \& Francis},
  address   = {London},
  issn      = {1814-2079 (E-Journal); 0022-1686 (Print)},
  doi       = {10.1080/00221686.2011.639981},
  pages     = {89 -- 97},
  year      = {2012},
  abstract  = {Since several decades, dam-break waves have been of main research interest. Mathematical approaches have been developed by analytical, physical and numerical models within the past 120 years. During the past 10 years, the number of research investigations has increased due to improved measurement techniques as well as significantly increased computer memories and performances. In this context, the present research deals with the initial stage of two-dimensional dam-break waves by comparing physical and numerical model results as well as analytical approaches. High-speed images and resulting particle image velocimetry calculations are thereby compared with the numerical volume-of-fluid (VOF) method, included in the commercial code FLOW-3D. Wave profiles and drag forces on placed obstacles are analysed in detail. Generally, a good agreement between the laboratory and VOF results is found.},
  language  = {en}
}
@article{Lohse1999,
  author    = {Lohse, Wolfram},
  title     = {Integraltafel f{\"u}r konische St{\"a}be mit doppelsymmetrischem I-Querschnitt},
  series = {Stahlbau. 68 (1999), H. 2},
  journal   = {Stahlbau. 68 (1999), H. 2},
  isbn      = {0038-9145},
  pages     = {91 -- 95},
  year      = {1999},
  language  = {de}
}
@article{BienerBoykenSasse1997,
  author    = {Biener, Ernst and Boyken, P. and Sasse, T.},
  title     = {Integrated dredged material management system of Bremen-Seehausen},
  series = {Sardinia 97 : proceedings ; [13 - 17 October 1997, S. Margherita di Pula - Cagliari, Sardinia, Italy] / Sixth International Landfill Symposium. Ed.: Thomas H. Christensen... - Bd. 5 : Landfill regulations, waste characteristics, landfilling in middle and lower income countries, industrial wastes and monolandfills},
  journal   = {Sardinia 97 : proceedings ; [13 - 17 October 1997, S. Margherita di Pula - Cagliari, Sardinia, Italy] / Sixth International Landfill Symposium. Ed.: Thomas H. Christensen... - Bd. 5 : Landfill regulations, waste characteristics, landfilling in middle and lower income countries, industrial wastes and monolandfills},
  publisher = {CISA, Environmental Sanitary Engineering Centre},
  address   = {Cagliari},
  pages     = {497 -- 502},
  year      = {1997},
  language  = {en}
}