@inproceedings{LatzkeAlexopoulosKronhardtetal.2015,
  author    = {Latzke, Markus and Alexopoulos, Spiros and Kronhardt, Valentina and Rend{\´o}n, Carlos and Sattler, Johannes Christoph},
  title     = {Comparison of Potential Sites in China for Erecting a Hybrid Solar Tower Power Plant with Air Receiver},
  series = {Energy Procedia},
  booktitle = {Energy Procedia},
  issn      = {1876-6102},
  doi       = {10.1016/j.egypro.2015.03.142},
  pages     = {1327 -- 1334},
  year      = {2015},
  language  = {en}
}
@inproceedings{RosinHenneboehlButenweg2015,
  author    = {Rosin, J. and Henneb{\"o}hl, B. and Butenweg, Christoph},
  title     = {Globale Stabilit{\"a}tsanalysen zylindrischer, seismisch belasteter Tanks auf numerischer Grundlage},
  series = {Erdbeben und bestehende Bauten : 14. D-A-C-H Tagung 20.08. - 21.08.2015, ETH Z{\"u}rich. (Dokumentation / SIA ; D 0255)},
  booktitle = {Erdbeben und bestehende Bauten : 14. D-A-C-H Tagung 20.08. - 21.08.2015, ETH Z{\"u}rich. (Dokumentation / SIA ; D 0255)},
  publisher = {SGEB},
  address   = {Z{\"u}rich},
  organization    = {D-A-C-H Tagung <14, 2015, Z{\"u}rich>},
  isbn      = {978-3-03732-060-0},
  pages     = {173 -- 180},
  year      = {2015},
  language  = {de}
}
@inproceedings{MichelZilligenRosinetal.2015,
  author    = {Michel, P. and Zilligen, H. and Rosin, J. and Butenweg, Christoph},
  title     = {Seismisches Verhalten pfahlgegr{\"u}ndeter Tankbauwerke},
  series = {Erdbeben und bestehende Bauten : 14. D-A-C-H Tagung 20.08. - 21.08.2015, ETH Z{\"u}rich. (Dokumentation / SIA ; D 0255)},
  booktitle = {Erdbeben und bestehende Bauten : 14. D-A-C-H Tagung 20.08. - 21.08.2015, ETH Z{\"u}rich. (Dokumentation / SIA ; D 0255)},
  publisher = {SGEB},
  address   = {Z{\"u}rich},
  organization    = {D-A-C-H Tagung <14, 2015, Z{\"u}rich>},
  isbn      = {978-3-03732-060-0},
  pages     = {181 -- 188},
  year      = {2015},
  language  = {de}
}
@article{TaddeiButenwegKlinkel2015,
  author    = {Taddei, Francesca and Butenweg, Christoph and Klinkel, S.},
  title     = {Parametric investigation of the soil-structure interaction effects on the dynamic behaviour of a shallow foundation supported wind turbine considering a layered soil},
  series = {Wind energy : an international journal for progress and applications in wind power conversion technology},
  volume    = {Volume 18},
  journal   = {Wind energy : an international journal for progress and applications in wind power conversion technology},
  number    = {Issue 3},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1099-1824 (E-Journal); 1095-4244 (Print)},
  doi       = {10.1002/we.1703},
  pages     = {399 -- 417},
  year      = {2015},
  language  = {en}
}
@article{KubalskiButenweg2015,
  author    = {Kubalski, Thomas and Butenweg, Christoph},
  title     = {Modelling strategies for horizontally loaded infill masonry},
  series = {Mauerwerk : European journal of masonry},
  volume    = {Volume 19},
  journal   = {Mauerwerk : European journal of masonry},
  number    = {Issue 5},
  publisher = {Wiley},
  address   = {Weinheim},
  doi       = {10.1002/dama.201500675},
  pages     = {363 -- 369},
  year      = {2015},
  language  = {de}
}
@incollection{StangelMesekeHahnSteuerDankert2015,
  author    = {Stangel-Meseke, Martina and Hahn, Pia and Steuer-Dankert, Linda},
  title     = {Der Individualisierungs-Trend pr{\"a}gt die Unternehmenszukunft},
  series = {Diversity Management und Individualisierung},
  booktitle = {Diversity Management und Individualisierung},
  publisher = {Springer Gabler},
  address   = {Wiesbaden},
  isbn      = {978-3-658-07484-5},
  doi       = {10.1007/978-3-658-07485-2_1},
  pages     = {1 -- 3},
  year      = {2015},
  abstract  = {Laut Zukunftsinstitut (2010) stellt die Individualisierung eine langfristige und nachhaltige Ver{\"a}nderung dar, die die gesamte Gesellschaft (den einzelnen Menschen, Unternehmen, den Staat) betrifft und Auswirkungen auf nahezu alle Lebensbereiche (z. B. Arbeit, Wohnen, Partnerschaft) hat. Die Individualisierung beschreibt dabei die Entwicklung hin zur Fokussierung pers{\"o}nlicher Interessen und Lebensentscheidungen der einzelnen Person (Kunze, Individualisierung, 2011). Der Grund f{\"u}r diese Entwicklung sind laut Kunze (Individualisierung, 2011) Treiber wie steigendes Verm{\"o}gen, Bildung und Mobilit{\"a}t, was die einzelne Person unabh{\"a}ngiger von gr{\"o}ßeren Gemeinschaften macht und mehr Freiheit zur Selbstverwirklichung bietet. Als eine Konsequenz daraus werden Wertevorstellungen nicht mehr einfach hingenommen, sondern f{\"u}r die eigene Person {\"u}berpr{\"u}ft und individualisiert (Kunze, Individualisierung, 2011). So wies Beck bereits 1996 darauf hin, dass Individualisierung meint „erstens die Aufl{\"o}sung und zweitens die Abl{\"o}sung industriegesellschaftlicher Lebensformen durch andere, in denen die Einzelnen ihre Biographie selbst herstellen, inszenieren, zusammenflickschustern m{\"u}ssen" (Beck, Die Erfindung des Politischen, 1996, S. 150).},
  language  = {de}
}
@incollection{StangelMesekeHahnSteuerDankert2015,
  author    = {Stangel-Meseke, Martina and Hahn, Pia and Steuer-Dankert, Linda},
  title     = {Ausblick: Der individualit{\"a}tsbezogene Diversity Management-Ansatz als Antwort auf Individualisierung},
  series = {Diversity Management und Individualisierung},
  booktitle = {Diversity Management und Individualisierung},
  publisher = {Springer Gabler},
  address   = {Wiesbaden},
  isbn      = {978-3-658-07485-2},
  pages     = {23 -- 24},
  year      = {2015},
  abstract  = {Der Megatrend Individualisierung fordert von Unternehmen, ihre Strategien und Prozessabl{\"a}ufe bei zunehmender Globalisierung grundlegend zu {\"u}berdenken. W{\"a}hrend Strategien und Prozessabl{\"a}ufe im Unternehmen Standards unterliegen, entwickelt sich unsere Gesellschaft immer st{\"a}rker zu einem individuumszentrierten System, in dem es gilt, Werte und Lebensstile der Individuen zu ber{\"u}cksichtigen und derart wertzusch{\"a}tzen, dass Mitarbeitende motiviert und mit hoher Bindung an das Unternehmen die anstehenden Leistungen f{\"u}r das Unternehmen erbringen. Im Konzept DiM sind Standardisierung und Individualisierung keine gegens{\"a}tzlichen Aspekte, da bei DiM neben der Betrachtung des betriebswirtschaftlichen Nutzens dieses Konzepts f{\"u}r Unternehmen die Wertsch{\"a}tzung des Individuums als genuines Merkmal betont wird.},
  language  = {de}
}
@inproceedings{SteuerDankertBergLeichtScholten2015,
  author    = {Steuer-Dankert, Linda and Berg, Tobias and Leicht-Scholten, Carmen},
  title     = {Breaking the habit - new approaches in engineering education},
  series = {Proceedings of the 43rd Annual Conference of the European Society for Engineering Education},
  booktitle = {Proceedings of the 43rd Annual Conference of the European Society for Engineering Education},
  isbn      = {978-2-87352-012-0},
  pages     = {11},
  year      = {2015},
  abstract  = {Within the framework of the project a genderand diversity-oriented teaching evaluation and modern, media-supported blended learning approaches were used in order to achieve the intended goals. First research results of the literature and status quo analysis were already implemented and tested in newly designed teaching approaches, for example in a multidisciplinary introductory lecture of civil engineering at RWTH Aachen University.},
  language  = {en}
}
@inproceedings{HoeflerKneerGrossetal.2015,
  author    = {H{\"o}fler, M. and Kneer, R. and Groß, Rolf Fritz and Kehrmann, K.},
  title     = {Chemical determination of oxygen transfer rates, transfer efficiencies and interphases evoked by aeration elements for liquid flows},
  series = {Computational Methods in Multiphase Flow VIII. - (WIT Transactions on Engineering Sciences ; Volume 89)},
  booktitle = {Computational Methods in Multiphase Flow VIII. - (WIT Transactions on Engineering Sciences ; Volume 89)},
  editor    = {Vorobieff, P.},
  publisher = {WIT Press},
  address   = {Southampton},
  isbn      = {978-1-84564-946-3 (Print-Ausgabe)},
  issn      = {1746-4471},
  pages     = {89 -- 101},
  year      = {2015},
  language  = {en}
}
@article{AlebouyehSamamiPieperBreitbachetal.2014,
  author    = {Alebouyeh Samami, Behzad and Pieper, Martin and Breitbach, Gerd and Hodapp, Josef},
  title     = {Heat production in the windings of the stators of electric machines under stationary condition},
  series = {Heat and mass transfer},
  volume    = {50},
  journal   = {Heat and mass transfer},
  publisher = {Springer},
  address   = {Heidelberg},
  issn      = {0947-7411 (Print) ; 1432-1181 (E-Journal)},
  doi       = {10.1007/s00231-014-1371-8},
  pages     = {1707 -- 1716},
  year      = {2014},
  abstract  = {In electric machines due to high currents and resistive losses (joule heating) heat is produced. To avoid damages by overheating the design of effective cooling systems is required. Therefore the knowledge of heat sources and heat transfer processes is necessary. The purpose of this paper is to illustrate a good and effective calculation method for the temperature analysis based on homogenization techniques. These methods have been applied for the stator windings in a slot of an electric machine consisting of copper wires and resin. The key quantity here is an effective thermal conductivity, which characterizes the heterogeneous wire resin-arrangement inside the stator slot. To illustrate the applicability of the method, the analysis of a simplified, homogenized model is compared with the detailed analysis of temperature behavior inside a slot of an electric machine according to the heat generation. We considered here only the stationary situation. The achieved numerical results are accurate and show that the applied homogenization technique works in practice. Finally the results of simulations for the two cases, the original model of the slot and the homogenized model chosen for the slot (unit cell), are compared to experimental results.},
  language  = {en}
}
@inproceedings{Goldbach2014,
  author    = {Goldbach, Daniel},
  title     = {Diagnosemaßnahmen im Umfeld der Funktionalen Sicherheit},
  series = {AmE 2014 - Automotive meets electronics [Elektronische Ressource] : Beitr{\"a}ge der 5. GMM-Fachtagung vom 18. bis 19. Februar 2014 in Dortmund / Veranst.: VDE/VDI-Gesellschaft Mikroelektronik, Mikrosystem- und Feinwerktechnik (GMM)},
  booktitle = {AmE 2014 - Automotive meets electronics [Elektronische Ressource] : Beitr{\"a}ge der 5. GMM-Fachtagung vom 18. bis 19. Februar 2014 in Dortmund / Veranst.: VDE/VDI-Gesellschaft Mikroelektronik, Mikrosystem- und Feinwerktechnik (GMM)},
  editor    = {Wahl, Michael},
  publisher = {VDE-Verl.},
  address   = {Berlin},
  isbn      = {978-3-8007-3580-8},
  pages     = {172 -- 179},
  year      = {2014},
  language  = {de}
}
@article{KuertenMottaghyZiegler2014,
  author    = {K{\"u}rten, Sylvia and Mottaghy, Darius and Ziegler, Martin},
  title     = {Planung, Auslegung und Dimensionierung von thermo-aktiven Bauteilen am Beispiel thermo-aktiver Abdichtungselemente},
  series = {Geothermie, Bohr- und Brunnentechnik},
  journal   = {Geothermie, Bohr- und Brunnentechnik},
  publisher = {Ernst \& Sohn},
  address   = {Berlin},
  pages     = {18 -- 20},
  year      = {2014},
  language  = {de}
}
@article{RathMottaghy2014,
  author    = {Rath, V. and Mottaghy, Darius},
  title     = {Klimainformation aus dem Untergrund?},
  series = {Geographische Rundschau},
  volume    = {66},
  journal   = {Geographische Rundschau},
  number    = {7-8},
  publisher = {Westermann},
  address   = {Braunschweig},
  issn      = {0016-7460},
  pages     = {30 -- 36},
  year      = {2014},
  language  = {de}
}
@article{VogtMottaghyRathetal.2014,
  author    = {Vogt, C. and Mottaghy, Darius and Rath, V. and Marquart, G. and Dijkshoorn, L. and Wolf, A. and Clauser, C.},
  title     = {Vertical variation in heat flow on the Kola Peninsula: palaeoclimate or fluid flow?},
  series = {Geophysical Journal International},
  volume    = {199},
  journal   = {Geophysical Journal International},
  number    = {2},
  publisher = {Oxford University Press},
  address   = {Oxford},
  issn      = {1365-246X},
  doi       = {10.1093/gji/ggu282},
  pages     = {829 -- 843},
  year      = {2014},
  abstract  = {Following earlier studies, we present forward and inverse simulations of heat and fluid transport of the upper crust using a local 3-D model of the Kola area. We provide best estimates for palaeotemperatures and permeabilities, their errors and their dependencies. Our results allow discriminating between the two mentioned processes to a certain extent, partly resolving the non-uniqueness of the problem. We find clear indications for a significant contribution of advective heat transport, which, in turn, imply only slightly lower ground surface temperatures during the last glacial maximum relative to the present value. These findings are consistent with the general background knowledge of (i) the fracture zones and the corresponding fluid movements in the bedrock and (ii) the glacial history of the Kola area.},
  language  = {en}
}
@article{SrivastavaLahiriMaitietal.2014,
  author    = {Srivastava, A. and Lahiri, S. and Maiti, M. and Knolle, F. and Hoyler, Friedrich and Scherer, Ulrich W. and Schnug, E. W.},
  title     = {Study of naturally occurring radioactive material (NORM) in top soil of Punjab State from the North Western part of India},
  series = {Journal of Radioanalytical and Nuclear Chemistry},
  volume    = {2014},
  journal   = {Journal of Radioanalytical and Nuclear Chemistry},
  number    = {302},
  publisher = {Springer Nature},
  address   = {Basel},
  issn      = {1588-2780 (E-Journal); 0022-4081 (Print); 0134-0719 (Print); 0236-5731 (Print); 1417-2097 (Print)},
  doi       = {0.1007/s10967-014-3450-1},
  pages     = {1049 -- 1052},
  year      = {2014},
  language  = {en}
}
@inproceedings{PieperSchulz2014,
  author    = {Pieper, Martin and Schulz, Silvia},
  title     = {Teaching Simulation Methods with COMSOL Multiphysics},
  organization    = {COMSOL Conference <2014, Cambridge>},
  pages     = {7},
  year      = {2014},
  abstract  = {This paper describes two courses on simulation methods for graduate students: "Simulation Methods" and "Simulation and Optimization in Virtual Engineering" The courses were planned to teach young engineers how to work with simulation software as well as to understand the necessary mathematical background. As simulation software COMSOL is used. The main philosophy was to combine theory and praxis in a way that motivates the students. In addition "soft skills" should be improved. This was achieved by project work as final examination. As underlying didactical principle the ideas of Bloom's revised taxonomy were followed. The paper basically focusses on educational aspects, e.g. how to structure the course, plan the exercises, organize the project work and include practical COMSOL examples.},
  language  = {en}
}
@inproceedings{WetterKern2014,
  author    = {Wetter, Martin and Kern, Alexander},
  title     = {Number of lightning strikes to tall structures - comparison of calculations and measurements using a modern lightning monitoring system},
  series = {2014 International Conference on Lightning Protection (ICLP), Shanghai, China},
  booktitle = {2014 International Conference on Lightning Protection (ICLP), Shanghai, China},
  organization    = {International Conference on Lightning Protection <2014, Shanghai>},
  pages     = {1 -- 7},
  year      = {2014},
  language  = {en}
}
@inproceedings{HellmannsFischerDilgeretal.2014,
  author    = {Hellmanns, Mark and Fischer, F. and Dilger, K. and Wittor, B. and Hildebrand, J. and Werner, F.},
  title     = {Applikation und Einsatz von faserverst{\"a}rkten Klebstoffen im Bauwesen abgeschlossenes IGF-Projekt Nr. 16956 B (DVS 08.072, Laufzeit 01.02.2011 - 31.01.2013)},
  series = {Tagungsband / 14. Kolloquium Gemeinsame Forschung in der Klebtechnik : 18. und 19. Februar 2014, DECHEMA-Haus, Frankfurt am Main},
  booktitle = {Tagungsband / 14. Kolloquium Gemeinsame Forschung in der Klebtechnik : 18. und 19. Februar 2014, DECHEMA-Haus, Frankfurt am Main},
  organization    = {DECHEMA, Gesellschaft f{\"u}r Chemische Technik und Biotechnologie},
  pages     = {26 -- 27},
  year      = {2014},
  language  = {de}
}
@inproceedings{RousseauKern2014,
  author    = {Rousseau, Alain and Kern, Alexander},
  title     = {How to deal with environmental risk in IEC 62305-2},
  series = {2014 International Conference on Lightning Protection (ICLP), Shanghai, China},
  booktitle = {2014 International Conference on Lightning Protection (ICLP), Shanghai, China},
  organization    = {International Conference on Lightning Protection <2014, Shanghai>},
  pages     = {521 -- 527},
  year      = {2014},
  abstract  = {The 2nd edition of the lightning risk management standard (IEC 62305-2) considers structures, which may endanger environment. In these cases, the loss is not limited to the structure itself, which is valid for usual structures. In the past (Edition 1) this danger was simply taken into account by a special hazard factor, multiplying the existing risk for the structure with a number. Now, in the edition 2, we add to the risk for the structure itself a "second risk" due to the losses outside the structure. The losses outside can be treated independently from what occurs inside. This is a major advantage to analyze the risk for sensitive structures, like chemical plants, nuclear plants, or structures containing explosives, etc. In this paper, the existing procedure given by the European version EN 62305-2 Ed.2 is further developed and applied to a few structures.},
  language  = {en}
}
@inproceedings{KernBraun2014,
  author    = {Kern, Alexander and Braun, Christian},
  title     = {Risk management according to IEC 62305-2 edition 2: 2010-12 assessment of structures with a risk of explosion},
  series = {2014 International Conference on Lightning Protection (ICLP), Shanghai, China},
  booktitle = {2014 International Conference on Lightning Protection (ICLP), Shanghai, China},
  organization    = {International Conference on Lightning Protection <2014, Shanghai>},
  pages     = {1237 -- 1242},
  year      = {2014},
  abstract  = {Risk management for structures with a risk of explosion should be considered very carefully when performing a risk analysis according to IEC 62305-2. In contrast to the 2006 edition of the standard, the 2010 edition describes the topic "Structures with a risk of explosion" in more detail. Moreover, in Germany separate procedures and parameters are defined for the risk analysis of structures with a risk of explosion (Supplement 3 of the German DIN EN 62305-2 standard). This paper describes the contents and the relevant calculations of this Supplement 3, together with a numerical example.},
  language  = {en}
}