@misc{Huening2023, author = {H{\"u}ning, Felix}, title = {Sensorvorrichtung zur Erfassung eines Magnetfelds sowie magnetbasiertes Sensorsystem zur Erfassung einer Bewegung eines beweglichen Objekts}, year = {2023}, abstract = {Eine Sensorvorrichtung (10;110;210;310;410) zur Erfassung eines Magnetfelds, mit einer Wiegand-Sensoreinheit (12;112;212) umfassend: • - mindestens zwei Wiegand-Dr{\"a}hte (20) und • - eine Spulenanordnung (22;122;222), die die mindestens zwei Wiegand-Dr{\"a}hte (20) radial umschließt und die • • • ein Sensorelement (26;126;226) und • • ein Triggerelement (28;128;228), durch das ein Triggermagnetfeld erzeugbar ist, bildet, ist bekannt. Um ein magnetbasiertes Sensorsystem (300;400) zur Erfassung einer Bewegung eines beweglichen Objekts (301;401) zu erm{\"o}glichen, das ohne externe Energieversorgung zuverl{\"a}ssig sowie energieeffizient arbeitet und kosteng{\"u}nstig hergestellt werden kann, ist bei der erfindungsgem{\"a}ßen Sensorvorrichtung (10;110;210;310;410) eine Wiegand-Triggereinheit (14;14a) vorhanden, umfassend: • - einen Wiegand-Draht (30) und • - eine Trigger-Sensorspule (32), die den Wiegand-Draht (30) radial umschließt, wobei ein erstes Ende der Trigger-Sensorspule (32) der Wiegand-Triggereinheit (14;14a) mit einem ersten Ende des Triggerelements (28;128;228) der Wiegand-Sensoreinheit (12;112;212) elektrisch verbunden ist und ein zweites Ende der Trigger-Sensorspule (32) der Wiegand-Triggereinheit (14;14a) mit einem zweiten Ende des Triggerelements (28;128;228) der Wiegand-Sensoreinheit (12;112;212) elektrisch verbunden ist. Auf diese Weise verst{\"a}rkt ein in der Trigger-Sensorspule (32) erzeugter Impuls das Gesamtmagnetfeld, das auf die Wiegand-Dr{\"a}hte (20) in der Sensoreinheit einwirkt, derart, dass die Triggefeldst{\"a}rke aller Wiegand-Dr{\"a}hte (20) {\"u}berschritten wird und diese im wesentlichen zeitgleich ausl{\"o}sen.}, language = {de} } @book{Huening2016, author = {H{\"u}ning, Felix}, title = {Sensoren und Sensorschnittstellen}, publisher = {De Gruyter Oldenbourg}, address = {Berlin}, isbn = {978-3-11-043854-3}, pages = {VII, 237 S. : Ill., graph. Darst.}, year = {2016}, language = {de} } @inproceedings{AltherrConzenElsenetal.2023, author = {Altherr, Lena and Conzen, Max and Elsen, Ingo and Frauenrath, Tobias and Lyrmann, Andreas}, title = {Sensor retrofitting of existing buildings in an interdisciplinary teaching project at university level}, series = {Tagungsband AALE 2023 : mit Automatisierung gegen den Klimawandel}, booktitle = {Tagungsband AALE 2023 : mit Automatisierung gegen den Klimawandel}, editor = {Reiff-Stephan, J{\"o}rg and J{\"a}kel, Jens and Schwarz, Andr{\´e}}, publisher = {le-tex publishing services GmbH}, address = {Leipzig}, isbn = {978-3-910103-01-6}, doi = {10.33968/2023.04}, pages = {31 -- 40}, year = {2023}, abstract = {Existing residential buildings have an average lifetime of 100 years. Many of these buildings will exist for at least another 50 years. To increase the efficiency of these buildings while keeping costs at reasonable rates, they can be retrofitted with sensors that deliver information to central control units for heating, ventilation and electricity. This retrofitting process should happen with minimal intervention into existing infrastructure and requires new approaches for sensor design and data transmission. At FH Aachen University of Applied Sciences, students of different disciplines work together to learn how to design, build, deploy and operate such sensors. The presented teaching project already created a low power design for a combined CO2, temperature and humidity measurement device that can be easily integrated into most home automation systems}, language = {en} } @article{KrauseSchuppeSaureetal.1989, author = {Krause, Gregor and Schuppe, W.D. and Saure, M. and Andress, H.}, title = {Sensitive Analytische und Physikalische Verfahren zum Nachweis von Ver{\"a}nderungen in Platten und Kabelisolierungen aus Polyolefinen / W.D. Schuppe, M. Saure, H. Andress, K. M{\"o}ller, D. Meurer, G. Krause}, series = {AEG Technische Mitteilungen (1989)}, journal = {AEG Technische Mitteilungen (1989)}, year = {1989}, language = {de} } @article{KrauseSchuppeSaureetal.1988, author = {Krause, Gregor and Schuppe, W.D. and Saure, M. and Andress, H.}, title = {Sensitive Analytical and Physical Methods for Diagnosis of Variations in Polyolefin Plaques and Cable Insulations / W.D. Schuppe, M. Saure, H. Andress, K. M{\"o}ller, D. Meurer, G. Krause}, series = {Proceedings of the 32nd session : 28th August - 3rd September.}, journal = {Proceedings of the 32nd session : 28th August - 3rd September.}, year = {1988}, language = {en} } @inproceedings{FerreinPotgieterSteinbauer2009, author = {Ferrein, Alexander and Potgieter, Anet and Steinbauer, Gerald}, title = {Self-aware robots - What do we need from learning, deliberation, and reactive control?}, series = {HYCAS 2009 : International Workshop on Hybrid Control of Autonomous Systems : Integrating Learning, Deliberation and Reactive Control : Pasadena, Calif., 13 July 2009}, booktitle = {HYCAS 2009 : International Workshop on Hybrid Control of Autonomous Systems : Integrating Learning, Deliberation and Reactive Control : Pasadena, Calif., 13 July 2009}, publisher = {AAAI Pr.}, pages = {1 -- 5}, year = {2009}, language = {en} } @article{Heuermann1995, author = {Heuermann, Holger}, title = {Selbstkalibrierverfahren zur Systemfehlerkorrektur von Streuparametermessungen auf Halbleitersubstraten}, series = {Mikrowellen und Optronik : Kongreßunterlagen = Microwaves and optronics / MIOP '95, 8. Kongreßmesse f{\"u}r Hochfrequenztechnik, Messehalle Sindelfingen, 30. Mai - 1. Juni 1995. [Hrsg.: Network GmbH]}, journal = {Mikrowellen und Optronik : Kongreßunterlagen = Microwaves and optronics / MIOP '95, 8. Kongreßmesse f{\"u}r Hochfrequenztechnik, Messehalle Sindelfingen, 30. Mai - 1. Juni 1995. [Hrsg.: Network GmbH]}, address = {Hagenburg}, isbn = {3-924651-45-0}, pages = {23 -- 29}, year = {1995}, language = {de} } @article{SchubaWrona2001, author = {Schuba, Marko and Wrona, Konrad}, title = {Security for Mobile Commerce Applications / Schuba, Marko ; Wrona, Konrad}, pages = {1 -- 8}, year = {2001}, language = {en} } @inproceedings{KueppersSchubaNeugebaueretal.2023, author = {K{\"u}ppers, Malte and Schuba, Marko and Neugebauer, Georg and H{\"o}ner, Tim and Hack, Sacha}, title = {Security analysis of the KNX smart building protocol}, series = {ARES '23: Proceedings of the 18th International Conference on Availability, Reliability and Security}, booktitle = {ARES '23: Proceedings of the 18th International Conference on Availability, Reliability and Security}, publisher = {ACM}, doi = {10.1145/3600160.3605167}, pages = {1 -- 7}, year = {2023}, abstract = {KNX is a protocol for smart building automation, e.g., for automated heating, air conditioning, or lighting. This paper analyses and evaluates state-of-the-art KNX devices from manufacturers Merten, Gira and Siemens with respect to security. On the one hand, it is investigated if publicly known vulnerabilities like insecure storage of passwords in software, unencrypted communication, or denialof-service attacks, can be reproduced in new devices. On the other hand, the security is analyzed in general, leading to the discovery of a previously unknown and high risk vulnerability related to so-called BCU (authentication) keys.}, language = {en} } @inproceedings{SchwankeHoefkenSchuba2017, author = {Schwanke, Peter and H{\"o}fken, Hans-Wilhelm and Schuba, Marko}, title = {Security Analysis of the ADS Protocol of a Beckhoff CX2020 PLC}, pages = {1 -- 5}, year = {2017}, abstract = {ICSs (Industrial Control Systems) and its subset SCADA systems (Supervisory Control and Data Acquisition) are getting exposed to a constant stream of new threats. The increasing importance of IT security in ICS requires viable methods to assess the security of ICS, its individual components, and its protocols. This paper presents a security analysis with focus on the communication protocols of a single PLC (Programmable Logic Controller). The PLC, a Beckhoff CX2020, is examined and new vulnerabilities of the system are revealed. Based on these findings recommendations are made to improve security of the Beckhoff system and its protocols.}, language = {en} } @article{Alt1989, author = {Alt, Helmut}, title = {Sechsunddreißig Spielarten der Verrechung : die Behandlung von Tilgungs- und Zinszahlungen}, series = {Frankfurter Zeitung : Blick durch die Wirtschaft : Zeitung f{\"u}r Finanzen, Steuern, Recht und Management}, journal = {Frankfurter Zeitung : Blick durch die Wirtschaft : Zeitung f{\"u}r Finanzen, Steuern, Recht und Management}, pages = {vom 12.9.1989}, year = {1989}, language = {de} } @article{SammFaissnerHeinrigsetal.1989, author = {Samm, Doris and Faissner, H. and Heinrigs, W. and Preussger, A.}, title = {Search for the two-photon decay of a light penetrating particle from a 590 MeV proton beam dump / Faissner, H.; Heinrigs, W.; Preussger, A.; Reitz, J.; Samm, D. [u.a.]}, series = {Zeitschrift f{\"u}r Physik, C Particles and Fields. 44 (1989), H. 4}, journal = {Zeitschrift f{\"u}r Physik, C Particles and Fields. 44 (1989), H. 4}, pages = {557 -- 566}, year = {1989}, language = {en} } @article{SammFaissnerGoettlicheretal.1992, author = {Samm, Doris and Faissner, H. and G{\"o}ttlicher, P. and Matela, H.}, title = {Search for scalar and pseudoscalar bosons emitted in nuclear decays via their interactions / Faissner, H.; Goettlicher, P. ; Matela, H. ; Samm, D.}, series = {Zeitschrift f{\"u}r Physik A Hadrons and Nuclei. 341 (1992), H. 3}, journal = {Zeitschrift f{\"u}r Physik A Hadrons and Nuclei. 341 (1992), H. 3}, pages = {359 -- 364}, year = {1992}, language = {en} } @book{AltSchumny1983, author = {Alt, Helmut and Schumny, Harald}, title = {Schreiben, Zeichnen, Tabellieren : (TI-59, HP-41 C) (Vieweg-Programmbibliothek Taschenrechner ; 4) / Helmut Alt ; Harald Schumny [Hrsg.]}, publisher = {Vieweg + Teubner}, address = {Wiesbaden}, isbn = {3-528-04233-8}, pages = {77 S.}, year = {1983}, language = {de} } @book{GromovHuening2015, author = {Gromov, Viacheslav and H{\"u}ning, Felix}, title = {Schnelleinstieg mit dem Renesas RL78/G14 Starter Kit}, publisher = {Franzis}, address = {Poing}, isbn = {978-3-645-10157-8}, pages = {76 Seiten}, year = {2015}, language = {de} } @article{HeuermannSchiek1994, author = {Heuermann, Holger and Schiek, Burkhard}, title = {Scattering Parameter Measurements of Microstrip Devices using the Double-LNN Calibration Technique}, series = {Conference proceedings : [Palais des Festivals et des Congr{\`e}s Cannes, France, 5 - 8 September 1994]}, journal = {Conference proceedings : [Palais des Festivals et des Congr{\`e}s Cannes, France, 5 - 8 September 1994]}, publisher = {Nexus Business Communications}, address = {Swanley}, isbn = {0-9518032-5-5}, year = {1994}, language = {en} } @inproceedings{GligorevicJostWalter2009, author = {Gligorevic, Snjezana and Jost, T. and Walter, M.}, title = {Scatterer based airport surface channel model}, series = {IEEE/AIAA 28th Digital Avionics Systems Conference : DASC '09 ; 23 - 29 [i.e. 25 - 29] Oct. 2009, Orlando, Fla.}, booktitle = {IEEE/AIAA 28th Digital Avionics Systems Conference : DASC '09 ; 23 - 29 [i.e. 25 - 29] Oct. 2009, Orlando, Fla.}, organization = {Institute of Electrical and Electronics Engineers}, isbn = {978-1-4244-4078-8}, pages = {4C2-1 -- 4C2-10}, year = {2009}, language = {en} } @article{FiedlerLaddBitz2017, author = {Fiedler, Thomas M. and Ladd, Mark E. and Bitz, Andreas}, title = {SAR Simulations \& Safety}, series = {NeuroImage}, journal = {NeuroImage}, number = {Epub ahead of print}, publisher = {Elsevier}, address = {Amsterdam}, issn = {1053-8119}, doi = {10.1016/j.neuroimage.2017.03.035}, year = {2017}, language = {en} } @inproceedings{BragardRongeDeDoncker2011, author = {Bragard, Michael and Ronge, C. and De Doncker, R. W.}, title = {Sandwich design of high-power thyristor based devices with integrated MOSFET structure}, series = {Proceedings of the 2011 - 14th - European Conference on Power Electronics and Applications (EPE 2011) : Aug. 30, 2011 - Sept. 1, 2011, Birmingham, United Kingdom}, booktitle = {Proceedings of the 2011 - 14th - European Conference on Power Electronics and Applications (EPE 2011) : Aug. 30, 2011 - Sept. 1, 2011, Birmingham, United Kingdom}, publisher = {IEEE}, address = {Piscataway, NJ}, isbn = {978-1-61284-167-0 (Print)}, year = {2011}, language = {en} } @article{FiedlerLaddClemensetal.2020, author = {Fiedler, Thomas M. and Ladd, Mark E. and Clemens, Markus and Bitz, Andreas}, title = {Safety of subjects during radiofrequency exposure in ultra-high-field magnetic resonance imaging}, series = {IEEE Letters on Electromagnetic Compatibility Practice and Applications}, volume = {2}, journal = {IEEE Letters on Electromagnetic Compatibility Practice and Applications}, number = {3}, publisher = {IEEE}, address = {New York, NY}, isbn = {2637-6423}, doi = {10.1109/LEMCPA.2020.3029747}, pages = {1 -- 8}, year = {2020}, abstract = {Magnetic resonance imaging (MRI) is one of the most important medical imaging techniques. Since the introduction of MRI in the mid-1980s, there has been a continuous trend toward higher static magnetic fields to obtain i.a. a higher signal-to-noise ratio. The step toward ultra-high-field (UHF) MRI at 7 Tesla and higher, however, creates several challenges regarding the homogeneity of the spin excitation RF transmit field and the RF exposure of the subject. In UHF MRI systems, the wavelength of the RF field is in the range of the diameter of the human body, which can result in inhomogeneous spin excitation and local SAR hotspots. To optimize the homogeneity in a region of interest, UHF MRI systems use parallel transmit systems with multiple transmit antennas and time-dependent modulation of the RF signal in the individual transmit channels. Furthermore, SAR increases with increasing field strength, while the SAR limits remain unchanged. Two different approaches to generate the RF transmit field in UHF systems using antenna arrays close and remote to the body are investigated in this letter. Achievable imaging performance is evaluated compared to typical clinical RF transmit systems at lower field strength. The evaluation has been performed under consideration of RF exposure based on local SAR and tissue temperature. Furthermore, results for thermal dose as an alternative RF exposure metric are presented.}, language = {en} } @article{HartungBaldoHornetal.2004, author = {Hartung, Frank and Baldo, N. and Horn, U. and Kampmann, M.}, title = {RTCP feedback based transmission rate control for 3G wireless multimedia streaming / Baldo, N. ; Horn, U. ; Kampmann, M. ; Hartung, F. ;}, series = {15th IEEE International Symposium on Personal, Indoor and Mobile Radio Communications, 2004. PIMRC 2004. Date:5-8 Sept. 2004 ; Vol. 3}, journal = {15th IEEE International Symposium on Personal, Indoor and Mobile Radio Communications, 2004. PIMRC 2004. Date:5-8 Sept. 2004 ; Vol. 3}, pages = {1817 -- 1821}, year = {2004}, language = {en} } @article{Huening2008, author = {H{\"u}ning, Felix}, title = {Robusti affidabili per le Sfide dell'automotive}, series = {Selezione di Elettronica (2008)}, journal = {Selezione di Elettronica (2008)}, publisher = {-}, pages = {116 -- 117}, year = {2008}, language = {de} } @article{HeuermannSchiek1991, author = {Heuermann, Holger and Schiek, Burkhard}, title = {Robuster Algorithmus zur Streuparameterbestimmung f{\"u}r systemfehlerkorrigierte Netzwerkanalysatoren}, series = {Kleinheubacher Berichte : Vortr{\"a}ge und Berichte der gemeinsamen Tagung des U.R.S.I.-Landesausschusses in der Bundesrepublik Deutschland / Hrsg.: Deutsche Telekom AG. 35. 1991 (1991)}, journal = {Kleinheubacher Berichte : Vortr{\"a}ge und Berichte der gemeinsamen Tagung des U.R.S.I.-Landesausschusses in der Bundesrepublik Deutschland / Hrsg.: Deutsche Telekom AG. 35. 1991 (1991)}, pages = {555 -- 556}, year = {1991}, language = {de} } @article{KrauseForsythPeter1993, author = {Krause, Gregor and Forsyth, Paul A. and Peter, Till}, title = {Robuste Filter in der Energieversorgung / Paul A. Forsyth, Gregor Krause, Till Peter}, series = {ETZ. 114 (1993), H. 22}, journal = {ETZ. 114 (1993), H. 22}, pages = {1382 -- 1385}, year = {1993}, language = {de} } @article{FerreinJacobsSchifferetal.2009, author = {Ferrein, Alexander and Jacobs, Stefan and Schiffer, Stefan and Beck, Daniel}, title = {Robust Collision Avoidance in Unknown Domestic Environments / Jacobs, Stefan ; Ferrein, Alexander ; Schiffer, Stefan ; Beck, Daniel ; Lakemeyer, Gerhard}, series = {ROBOCUP 2009: ROBOT SOCCER WORLD CUP XIII}, journal = {ROBOCUP 2009: ROBOT SOCCER WORLD CUP XIII}, publisher = {Springer}, address = {Berlin}, pages = {116 -- 127}, year = {2009}, language = {en} } @article{HeuermannSchiek1994, author = {Heuermann, Holger and Schiek, B.}, title = {Robust Algorithms for Txx Network Analyzer Self-Calibration Procedures}, series = {IEEE transactions on instrumentation and measurement : IM / Institute of Electrical and Electronics Engineers, Instrumentation and Measurement Group. 43 (1994), H. 1}, journal = {IEEE transactions on instrumentation and measurement : IM / Institute of Electrical and Electronics Engineers, Instrumentation and Measurement Group. 43 (1994), H. 1}, isbn = {0018-9456}, pages = {18 -- 23}, year = {1994}, language = {en} } @inproceedings{Ferrein2015, author = {Ferrein, Alexander}, title = {Robots: challenges, chances and risks for solving 21st century problems}, series = {President's Invitation Lecture / South African Institute of Electrical Engineers : May 21 \& 22, 2015, University of Johannesburg}, booktitle = {President's Invitation Lecture / South African Institute of Electrical Engineers : May 21 \& 22, 2015, University of Johannesburg}, organization = {South African Institute of Electrical Engineers}, pages = {1 -- 45}, year = {2015}, language = {en} } @incollection{CzarneckiFettke2021, author = {Czarnecki, Christian and Fettke, Peter}, title = {Robotic process automation : Positioning, structuring, and framing the work}, series = {Robotic process automation : Management, technology, applications}, booktitle = {Robotic process automation : Management, technology, applications}, editor = {Czarnecki, Christian and Fettke, Peter}, publisher = {De Gruyter}, address = {Oldenbourg}, isbn = {978-3-11-067668-6 (Print)}, doi = {10.1515/9783110676693-202}, pages = {3 -- 24}, year = {2021}, abstract = {Robotic process automation (RPA) has attracted increasing attention in research and practice. This chapter positions, structures, and frames the topic as an introduction to this book. RPA is understood as a broad concept that comprises a variety of concrete solutions. From a management perspective RPA offers an innovative approach for realizing automation potentials, whereas from a technical perspective the implementation based on software products and the impact of artificial intelligence (AI) and machine learning (ML) are relevant. RPA is industry-independent and can be used, for example, in finance, telecommunications, and the public sector. With respect to RPA this chapter discusses definitions, related approaches, a structuring framework, a research framework, and an inside as well as outside architectural view. Furthermore, it provides an overview of the book combined with short summaries of each chapter.}, language = {en} } @incollection{Czarnecki2019, author = {Czarnecki, Christian}, title = {Robotergesteuerte Prozessautomatisierung}, series = {Enzyklop{\"a}die der Wirtschaftsinformatik}, booktitle = {Enzyklop{\"a}die der Wirtschaftsinformatik}, publisher = {Gito}, address = {Berlin}, pages = {1 -- 3}, year = {2019}, language = {de} } @article{FerreinLakemeyer2006, author = {Ferrein, Alexander and Lakemeyer, Gerhard}, title = {Roboterfußball - Wissenschaft, die auch Spass macht / Ferrein, Alexander ; Lakemeyer, Gerhard}, series = {RWTH Themen (2006)}, journal = {RWTH Themen (2006)}, isbn = {0179-079X}, pages = {36 -- 39}, year = {2006}, language = {de} } @book{Ferrein2008, author = {Ferrein, Alexander}, title = {Robot controllers for highly dynamic environments with real-time constraints}, pages = {XVI; 247 S. : Ill., graph. Darst}, year = {2008}, language = {en} } @article{Ferrein2010, author = {Ferrein, Alexander}, title = {Robot controllers for highly dynamic environments with real-time constraints}, series = {K{\"u}nstliche Intelligenz : KI. 24 (2010), H. 2}, journal = {K{\"u}nstliche Intelligenz : KI. 24 (2010), H. 2}, isbn = {1610-1987}, pages = {175 -- 178}, year = {2010}, language = {en} } @article{FerreinSteinbauerMcPhillipsetal.2008, author = {Ferrein, Alexander and Steinbauer, Gerald and McPhillips, Graeme and Potgieter, Anet}, title = {RoboCup Standard Platform League - Team Zadeat : an intercontinental research effort}, pages = {1 -- 7}, year = {2008}, language = {en} } @incollection{NiemuellerEwertReuteretal.2014, author = {Niem{\"u}ller, Tim and Ewert, Daniel and Reuter, Sebastian and Ferrein, Alexander and Jeschke, Sabina and Lakemeyer, Gerhard}, title = {RoboCup logistics league sponsored by festo: A competitive factory automation testbed}, series = {RoboCup 2013: Robot World Cup XVII : Eindhoven; Netherlands; 1 July 2013 through 1 July 2013. (Lecture notes in computer science ; 8371)}, booktitle = {RoboCup 2013: Robot World Cup XVII : Eindhoven; Netherlands; 1 July 2013 through 1 July 2013. (Lecture notes in computer science ; 8371)}, publisher = {Springer}, address = {Berlin}, organization = {RoboCup International Symposium <17, 2013, Eindhoven>}, isbn = {978-3-662-44467-2 (Print) 978-3-662-44468-9 (Online)}, pages = {336 -- 347}, year = {2014}, abstract = {A new trend in automation is to deploy so-called cyber-physical systems (CPS) which combine computation with physical processes. The novel RoboCup Logistics League Sponsored by Festo (LLSF) aims at such CPS logistic scenarios in an automation setting. A team of robots has to produce products from a number of semi-finished products which they have to machine during the game. Different production plans are possible and the robots need to recycle scrap byproducts. This way, the LLSF is a very interesting league offering a number of challenging research questions for planning, coordination, or communication in an application-driven scenario. In this paper, we outline the objectives of the LLSF and present steps for developing the league further towards a benchmark for logistics scenarios for CPS. As a major milestone we present the new automated referee system which helps in governing the game play as well as keeping track of the scored points in a very complex factory scenario.}, language = {en} } @article{FerreinMaraisPotgieteretal.2011, author = {Ferrein, Alexander and Marais, Stephen and Potgieter, Anet and Steinbauer, Gerald}, title = {RoboCup Junior: A vehicle for S\&T education in Africa?}, publisher = {IEEE}, address = {New York}, isbn = {978-1-61284-992-8}, pages = {1 -- 6}, year = {2011}, language = {en} } @article{Wolf2003, author = {Wolf, Martin}, title = {Risiko- und Maßnahmenmanagement bei der Computervalidierung}, series = {Pharma-Technologie-Journal (2003)}, journal = {Pharma-Technologie-Journal (2003)}, publisher = {-}, isbn = {0931-9700}, pages = {50 -- 62}, year = {2003}, language = {de} } @inproceedings{BonneyNagelSchuba2016, author = {Bonney, Gregor and Nagel, Stefan and Schuba, Marko}, title = {Risiko Smart Home - Angriff auf ein Babymonitorsystem}, series = {Proceedings of DACH Security 2016, Klagenfurt, Austria, September 2016}, booktitle = {Proceedings of DACH Security 2016, Klagenfurt, Austria, September 2016}, editor = {Schartner, P.}, pages = {371 -- 378}, year = {2016}, abstract = {Unser Zuhause wird zunehmend intelligenter. Smart Homes bieten uns die Steuerung von Haus- oder Unterhaltungstechnik bequem vom Smartphone aus. Junge Familien nutzen die Technologie, um mittels vernetzten Babymonitorsystemen ihren Nachwuchs von {\"u}berall aus im Blick zu haben. Davon auszugehen, dass solche Systeme mit einem Fokus auf Sicherheit entwickelt wurden, um die sehr pers{\"o}nlichen Daten zu sch{\"u}tzen, ist jedoch ein Trugschluss. Die Untersuchung eines handels{\"u}blichen und keineswegs billigen Systems zeigt, dass die Ger{\"a}te sehr einfach kompromittiert und missbraucht werden k{\"o}nnen.}, language = {de} } @article{SammFaissnerHeinrigsetal.1983, author = {Samm, Doris and Faissner, H. and Heinrigs, W. and Latsch, C.}, title = {Richtungsselektive Z{\"a}hleranordnung zur Messung der Masse Axion-{\"a}hnlicher Teilchen / Faissner, H. ; Heinrigs, W. ; Latsch, C.; Preussger, A.; Samm, D.}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft. 18 (1983), H. 6}, journal = {Verhandlungen der Deutschen Physikalischen Gesellschaft. 18 (1983), H. 6}, pages = {1213 -- 1213}, year = {1983}, language = {de} } @inproceedings{BitzKobusScheenenetal.2013, author = {Bitz, Andreas and Kobus, Thiele and Scheenen, Tom W. J. and Ladd, Mark E.}, title = {RF Safety of the Combination of a 31P Tx/Rx Endorectal Coil \& a 1H Tx/Rx Body Array for 31P MRSI of the Prostate at 7T (311.)}, series = {20th Annual ISMRM scientific meeting and exhibition 2012 : Melbourne, Australia, 5 - 11 May 2012}, booktitle = {20th Annual ISMRM scientific meeting and exhibition 2012 : Melbourne, Australia, 5 - 11 May 2012}, number = {Volume 1}, publisher = {Curran}, address = {Red Hook, NY}, isbn = {978-1-62276-943-8}, issn = {1545-4428}, pages = {311}, year = {2013}, language = {en} } @article{FiedlerLaddBitz2017, author = {Fiedler, Thomas M. and Ladd, Mark E. and Bitz, Andreas}, title = {RF safety assessment of a bilateral four-channel transmit/receive 7 Tesla breast coil: SAR versus temperature limits}, series = {Medical Physics}, volume = {44}, journal = {Medical Physics}, number = {1}, doi = {10.1002/mp.12034}, pages = {143 -- 157}, year = {2017}, language = {en} } @inproceedings{AllalBannisterBuismanetal.2022, author = {Allal, D. and Bannister, R. and Buisman, K. and Capriglione, D. and Di Capua, G. and Garc{\´i}a-Patr{\´o}n, M. and Gatzweiler, Thomas and Gellersen, F. and Harzheim, Thomas and Heuermann, Holger and Hoffmann, J. and Izbrodin, A. and Kuhlmann, K. and Lahbacha, K. and Maffucci, A. and Miele, G. and Mubarak, F. and Salter, M. and Pham, T.D. and Sayegh, A. and Singh, D. and Stein, F. and Zeier, M.}, title = {RF measurements for future communication applications: an overview}, series = {2022 IEEE International Symposium on Measurements \& Networking (M\&N)}, booktitle = {2022 IEEE International Symposium on Measurements \& Networking (M\&N)}, publisher = {IEEE}, isbn = {978-1-6654-8362-9}, issn = {2639-5061}, doi = {10.1109/MN55117.2022.9887740}, pages = {1 -- 6}, year = {2022}, abstract = {In this paper research activities developed within the FutureCom project are presented. The project, funded by the European Metrology Programme for Innovation and Research (EMPIR), aims at evaluating and characterizing: (i) active devices, (ii) signal- and power integrity of field programmable gate array (FPGA) circuits, (iii) operational performance of electronic circuits in real-world and harsh environments (e.g. below and above ambient temperatures and at different levels of humidity), (iv) passive inter-modulation (PIM) in communication systems considering different values of temperature and humidity corresponding to the typical operating conditions that we can experience in real-world scenarios. An overview of the FutureCom project is provided here, then the research activities are described.}, language = {en} } @inproceedings{BitzStreckertHansenetal.2000, author = {Bitz, Andreas and Streckert, J. and Hansen, V.W. and Buschmann, J.}, title = {RF exposure of non restrained animals in an overmoded radial waveguide}, series = {22nd BEMS Annual Meeting, Munich, Germany, 2000}, booktitle = {22nd BEMS Annual Meeting, Munich, Germany, 2000}, publisher = {Bioelectromagnetics Society}, address = {Frederick, MD}, pages = {63}, year = {2000}, language = {en} } @article{HansenBitzStreckert1999, author = {Hansen, Volkert W. and Bitz, Andreas and Streckert, Joachim R.}, title = {RF Exposure of Biological Systems in Radial Waveguides}, series = {IEEE Transactions on Electromagnetic Compatibility}, volume = {41}, journal = {IEEE Transactions on Electromagnetic Compatibility}, number = {4}, issn = {1558-187X}, doi = {10.1109/15.809852}, pages = {487 -- 493}, year = {1999}, language = {en} } @article{OrzadaMaderwaldPoseretal.2010, author = {Orzada, Stephan and Maderwald, Stefan and Poser, Benedikt Andreas and Bitz, Andreas and Quick, Harald H. and Ladd, Mark E.}, title = {RF excitation using time interleaved acquisition of modes (TIAMO) to address B1 inhomogeneity in high-field MRI}, series = {Magnetic Resonance in Medicine}, volume = {64}, journal = {Magnetic Resonance in Medicine}, number = {2}, publisher = {Wiley-Liss}, address = {New York}, issn = {1522-2594}, doi = {10.1002/mrm.22527}, pages = {327 -- 333}, year = {2010}, abstract = {As the field strength and, therefore, the operational frequency in MRI is increased, the wavelength approaches the size of the human head/body, resulting in wave effects, which cause signal decreases and dropouts. Several multichannel approaches have been proposed to try to tackle these problems, including RF shimming, where each element in an array is driven by its own amplifier and modulated with a certain (constant) amplitude and phase relative to the other elements, and Transmit SENSE, where spatially tailored RF pulses are used. In this article, a relatively inexpensive and easy to use imaging scheme for 7 Tesla imaging is proposed to mitigate signal voids due to B1 field inhomogeneity. Two time-interleaved images are acquired using a different excitation mode for each. By forming virtual receive elements, both images are reconstructed together using GRAPPA to achieve a more homogeneous image, with only small SNR and SAR penalty in head and body imaging at 7 Tesla.}, language = {en} } @article{HagemannHennings1981, author = {Hagemann, Hans-J{\"u}rgen and Hennings, D.}, title = {Reversible Weight change of acceptor-doped BaTiO3. Hagemann, H. J.; Hennings, D.}, series = {Journal of the American Ceramic Society. 64 (1981)}, journal = {Journal of the American Ceramic Society. 64 (1981)}, isbn = {0002-7820}, pages = {590 -- 594}, year = {1981}, language = {en} } @article{HeuermannSchiek1997, author = {Heuermann, Holger and Schiek, B.}, title = {Results of network analyzer measurements with leakage errors-corrected with direct calibration techniques}, series = {IEEE transactions on instrumentation and measurement : IM / Institute of Electrical and Electronics Engineers, Instrumentation and Measurement Group. 46 (1997), H. 5}, journal = {IEEE transactions on instrumentation and measurement : IM / Institute of Electrical and Electronics Engineers, Instrumentation and Measurement Group. 46 (1997), H. 5}, isbn = {0018-9456}, pages = {1120 -- 1127}, year = {1997}, language = {en} } @article{HeuermannSchiek1994, author = {Heuermann, Holger and Schiek, Burkhard}, title = {Results of Network Analyzer Measurements with Leakage Errors Corrected with the TMS-15-Term Procedure}, pages = {1361 -- 1364}, year = {1994}, language = {en} } @article{HeuermannBaumannFauthetal.1994, author = {Heuermann, Holger and Baumann, F.-M. and Fauth, G. and Albert, M.}, title = {Results of Network Analyzer Measurements with Leakage Errors Corrected with the TMS-15-Term Procedure}, series = {On-Line Moisture Analysis of Raw Coal}, journal = {On-Line Moisture Analysis of Raw Coal}, pages = {1361 -- 1364}, year = {1994}, language = {en} } @article{AltherrBroetzDietrichetal.2018, author = {Altherr, Lena and Br{\"o}tz, Nicolas and Dietrich, Ingo and Gally, Tristan and Geßner, Felix and Kloberdanz, Hermann and Leise, Philipp and Pelz, Peter Franz and Schlemmer, Pia and Schmitt, Andreas}, title = {Resilience in mechanical engineering - a concept for controlling uncertainty during design, production and usage phase of load-carrying structures}, series = {Applied Mechanics and Materials}, volume = {885}, journal = {Applied Mechanics and Materials}, publisher = {Trans Tech Publications}, address = {B{\"a}ch}, isbn = {1662-7482}, doi = {10.4028/www.scientific.net/AMM.885.187}, pages = {187 -- 198}, year = {2018}, abstract = {Resilience as a concept has found its way into different disciplines to describe the ability of an individual or system to withstand and adapt to changes in its environment. In this paper, we provide an overview of the concept in different communities and extend it to the area of mechanical engineering. Furthermore, we present metrics to measure resilience in technical systems and illustrate them by applying them to load-carrying structures. By giving application examples from the Collaborative Research Centre (CRC) 805, we show how the concept of resilience can be used to control uncertainty during different stages of product life.}, language = {en} } @inproceedings{LorenzAltherrPelz2020, author = {Lorenz, Imke-Sophie and Altherr, Lena and Pelz, Peter F.}, title = {Resilience enhancement of critical infrastructure - graph-theoretical resilience analysis of the water distribution system in the German city of Darmstadt}, series = {14th WCEAM Proceedings}, booktitle = {14th WCEAM Proceedings}, publisher = {Springer}, address = {Cham}, isbn = {978-3-030-64228-0}, doi = {10.1007/978-3-030-64228-0_13}, pages = {137 -- 149}, year = {2020}, abstract = {Water suppliers are faced with the great challenge of achieving high-quality and, at the same time, low-cost water supply. Since climatic and demographic influences will pose further challenges in the future, the resilience enhancement of water distribution systems (WDS), i.e. the enhancement of their capability to withstand and recover from disturbances, has been in particular focus recently. To assess the resilience of WDS, graph-theoretical metrics have been proposed. In this study, a promising approach is first physically derived analytically and then applied to assess the resilience of the WDS for a district in a major German City. The topology based resilience index computed for every consumer node takes into consideration the resistance of the best supply path as well as alternative supply paths. This resistance of a supply path is derived to be the dimensionless pressure loss in the pipes making up the path. The conducted analysis of a present WDS provides insight into the process of actively influencing the resilience of WDS locally and globally by adding pipes. The study shows that especially pipes added close to the reservoirs and main branching points in the WDS result in a high resilience enhancement of the overall WDS.}, language = {en} } @incollection{AltherrLeise2021, author = {Altherr, Lena and Leise, Philipp}, title = {Resilience as a concept for mastering uncertainty}, series = {Mastering Uncertainty in Mechanical Engineering}, booktitle = {Mastering Uncertainty in Mechanical Engineering}, publisher = {Springer}, address = {Cham}, isbn = {978-3-030-78353-2}, doi = {10.1007/978-3-030-78354-9}, pages = {412 -- 417}, year = {2021}, language = {en} } @inproceedings{ZaehlBiewendtWolfetal.2022, author = {Z{\"a}hl, Philipp M. and Biewendt, Marcel and Wolf, Martin and Eggert, Mathias}, title = {Requirements for Competence Developing Games in the Environment of SE Competence Development}, series = {Angewandte Forschung in der Wirtschaftsinformatik 2022}, booktitle = {Angewandte Forschung in der Wirtschaftsinformatik 2022}, publisher = {GITO}, address = {Berlin}, isbn = {978-3-95545-409-8}, doi = {10.30844/AKWI_2022_05}, pages = {73 -- 88}, year = {2022}, abstract = {Many of today's factors make software development more and more complex, such as time pressure, new technologies, IT security risks, et cetera. Thus, a good preparation of current as well as future software developers in terms of a good software engineering education becomes progressively important. As current research shows, Competence Developing Games (CDGs) and Serious Games can offer a potential solution. This paper identifies the necessary requirements for CDGs to be conducive in principle, but especially in software engineering (SE) education. For this purpose, the current state of research was summarized in the context of a literature review. Afterwards, some of the identified requirements as well as some additional requirements were evaluated by a survey in terms of subjective relevance.}, language = {en} } @article{FerreinMiesLakemeyer2008, author = {Ferrein, Alexander and Mies, Christoph and Lakemeyer, Gerhard}, title = {Repairing Decision-Theoretic Policies Using Goal-Oriented Planning / Mies, Christoph ; Ferrein, Alexander ; Lakemeyer, Gerhard}, series = {KI 2008: Advances in Artificial Intelligence : 31st Annual German Conference on AI, KI 2008, Kaiserslautern, Germany, September 23-26, 2008. Proceedings}, journal = {KI 2008: Advances in Artificial Intelligence : 31st Annual German Conference on AI, KI 2008, Kaiserslautern, Germany, September 23-26, 2008. Proceedings}, publisher = {Springer}, address = {Berlin}, isbn = {978-3-540-85844-7}, pages = {267 -- 275}, year = {2008}, language = {en} } @article{Alt1992, author = {Alt, Helmut}, title = {Renditevergleich zwischen Immobilien und Festverzinslichen}, series = {Die Bank}, journal = {Die Bank}, number = {H. 2}, issn = {0342-3182}, pages = {91 -- 92}, year = {1992}, language = {de} } @article{UmutluOrzadaKinneretal.2011, author = {Umutlu, Lale and Orzada, Stephan and Kinner, Sonja and Maderwald, Stefan and Bronte, Irina and Bitz, Andreas and Kraff, Oliver and Ladd, Susanne C. and Antoch, Gerald and Ladd, Mark E. and Quick, Harald H. and Lauenstein, Thomas C.}, title = {Renal imaging at 7 Tesla: preliminary results}, series = {European Radiology}, volume = {21}, journal = {European Radiology}, number = {4}, publisher = {Springer}, address = {Berlin}, issn = {1432-1084}, pages = {841 -- 849}, year = {2011}, abstract = {Objective To investigate the feasibility of 7T MR imaging of the kidneys utilising a custom-built 8-channel transmit/receive radiofrequency body coil. Methods In vivo unenhanced MR was performed in 8 healthy volunteers on a 7T whole-body MR system. After B0 shimming the following sequences were obtained: 1) 2D and 3D spoiled gradient-echo sequences (FLASH, VIBE), 2) T1-weighted 2D in and opposed phase 3) True-FISP imaging and 4) a T2-weighted turbo spin echo (TSE) sequence. Visual evaluation of the overall image quality was performed by two radiologists. Results Renal MRI at 7T was feasible in all eight subjects. Best image quality was found using T1-weighted gradient echo MRI, providing high anatomical details and excellent conspicuity of the non-enhanced vasculature. With successful shimming, B1 signal voids could be effectively reduced and/or shifted out of the region of interest in most sequence types. However, T2-weighted TSE imaging remained challenging and strongly impaired because of signal heterogeneities in three volunteers. Conclusion The results demonstrate the feasibility and diagnostic potential of dedicated 7T renal imaging. Further optimisation of imaging sequences and dedicated RF coil concepts are expected to improve the acquisition quality and ultimately provide high clinical diagnostic value.}, language = {en} } @book{Siepmann1987, author = {Siepmann, Thomas}, title = {Reibmomente in Zylinderrollenlagern f{\"u}r Planetenr{\"a}der}, address = {Bochum}, isbn = {3-89194-068-8}, pages = {279 S. : graph. Darst.}, year = {1987}, language = {de} } @article{LepersRakePuetter1976, author = {Lepers, Heinrich and Rake, H. and P{\"u}tter, L.}, title = {Regelung der Qualitaet beim Brennen von Zementklinker}, series = {Regelungstechnische Praxis : rtp}, volume = {18}, journal = {Regelungstechnische Praxis : rtp}, number = {4}, publisher = {Oldenbourg}, address = {M{\"u}nchen}, issn = {0340-4730}, pages = {87 -- 91}, year = {1976}, language = {de} } @article{CzarneckiWinkelmannSpiliopoulou2013, author = {Czarnecki, Christian and Winkelmann, Axel and Spiliopoulou, Myra}, title = {Referenzprozessabl{\"a}ufe f{\"u}r Telekommunikationsunternehmen: Eine Erweiterung des eTOM-Modells}, series = {Wirtschaftsinformatik}, volume = {55}, journal = {Wirtschaftsinformatik}, number = {2}, publisher = {Springer Fachmedien}, address = {Wiesbaden}, issn = {1861-8936}, doi = {10.1007/s11576-013-0351-9}, pages = {83 -- 97}, year = {2013}, abstract = {Der Telekommunikationsmarkt erf{\"a}hrt substanzielle Ver{\"a}nderungen. Neue Gesch{\"a}ftsmodelle, innovative Dienstleistungen und Technologien erfordern Reengineering, Transformation und Prozessstandardisierung. Mit der Enhanced Telecom Operation Map (eTOM) bietet das TM Forum ein international anerkanntes de facto Referenz-Prozess-Framework basierend auf spezifischen Anforderungen und Auspr{\"a}gungen der Telekommunikationsindustrie an. Allerdings enth{\"a}lt dieses Referenz-Framework nur eine hierarchische Sammlung von Prozessen auf unterschiedlichen Abstraktionsebenen. Eine Kontrollsicht verstanden als sequenzielle Anordnung von Aktivit{\"a}ten und daraus resultierend ein realer Prozessablauf fehlt ebenso wie eine Ende-zu-Ende-Sicht auf den Kunden. In diesem Artikel erweitern wir das eTOM-Referenzmodell durch Referenzprozessabl{\"a}ufe, in welchen wir das Wissen {\"u}ber Prozesse in Telekommunikationsunternehmen abstrahieren und generalisieren. Durch die Referenzprozessabl{\"a}ufe werden Unternehmen bei dem strukturierten und transparenten (Re-)Design ihrer Prozesse unterst{\"u}tzt. Wir demonstrieren die Anwendbarkeit und N{\"u}tzlichkeit unserer Referenzprozessabl{\"a}ufe in zwei Fallstudien und evaluieren diese anhand von Kriterien f{\"u}r die Bewertung von Referenzmodellen. Die Referenzprozessabl{\"a}ufe wurden vom TM Forum in den Standard aufgenommen und als Teil von eTOM Version 9 ver{\"o}ffentlicht. Dar{\"u}ber hinaus diskutieren wir die Komponenten unseres Ansatzes, die auch außerhalb der Telekommunikationsindustrie angewandt werden k{\"o}nnen.}, language = {de} } @book{CzarneckiDietze2017, author = {Czarnecki, Christian and Dietze, Christian}, title = {Reference architecture for the telecommunications industry: Transformation of strategy, organization, processes, data, and applications}, publisher = {Springer}, address = {Cham}, isbn = {978-3-319-46755-9 (Print)}, doi = {10.1007/978-3-319-46757-3}, pages = {XXII, 253 Seiten}, year = {2017}, abstract = {This book reflects the tremendous changes in the telecommunications industry in the course of the past few decades - shorter innovation cycles, stiffer competition and new communication products. It analyzes the transformation of processes, applications and network technologies that are now expected to take place under enormous time pressure. The International Telecommunication Union (ITU) and the TM Forum have provided reference solutions that are broadly recognized and used throughout the value chain of the telecommunications industry, and which can be considered the de facto standard. The book describes how these reference solutions can be used in a practical context: it presents the latest insights into their development, highlights lessons learned from numerous international projects and combines them with well-founded research results in enterprise architecture management and reference modeling. The complete architectural transformation is explained, from the planning and set-up stage to the implementation. Featuring a wealth of examples and illustrations, the book offers a valuable resource for telecommunication professionals, enterprise architects and project managers alike.}, language = {en} } @article{Fassbender2001, author = {Faßbender, Heinz}, title = {Reengineering an Ada95-programmed command and control information system by using UML}, series = {Proceedings : September 30 - October 4, 2001, Twin Cities, Best Western The Thunderbird Hotel \& Convention Center, Bloomington, MN, USA / ACM SIGAda Annual International Conference (SIGAda 2001)}, journal = {Proceedings : September 30 - October 4, 2001, Twin Cities, Best Western The Thunderbird Hotel \& Convention Center, Bloomington, MN, USA / ACM SIGAda Annual International Conference (SIGAda 2001)}, publisher = {ACM}, address = {New York, NY}, isbn = {1-58113-392-8}, pages = {53 -- 60}, year = {2001}, language = {en} } @techreport{KraetzigRoedelMeyeretal.2013, author = {Kr{\"a}tzig, Thomas and R{\"o}del, Sascha and Meyer, Lorenz and G{\"u}nthert, Wolfgang}, title = {Reduzierung von Wasserverlusten mittels energieautarker Mess- und Steuereinheiten - Smart Water Power : Schlussbericht : Berichtszeitraum 01.10.2010 - 31.03.2013 : F{\"o}rderkennzeichen 02WQ1172-74}, publisher = {Bundesministerium f{\"u}r Bildung und Forschung}, address = {Bonn}, pages = {86 S.}, year = {2013}, language = {de} } @article{Engels2000, author = {Engels, Elmar}, title = {Reduzierung der horizontalen Massenkr{\"a}fte bei Pressen mit Raumlenkerantrieb}, series = {UTF-science : Forschungsmagazin f{\"u}r die Produktionstechnik. 1 (2000), H. 3}, journal = {UTF-science : Forschungsmagazin f{\"u}r die Produktionstechnik. 1 (2000), H. 3}, pages = {17 S.}, year = {2000}, language = {de} } @inproceedings{HueningWacheMagiera2021, author = {H{\"u}ning, Felix and Wache, Franz-Josef and Magiera, David}, title = {Redundant bus systems using dual-mode radio}, series = {Proceedings of Sixth International Congress on Information and Communication Technology}, booktitle = {Proceedings of Sixth International Congress on Information and Communication Technology}, publisher = {Springer}, address = {Singapore}, isbn = {978-981-16-2379-0}, doi = {10.1007/978-981-16-2380-6_73}, pages = {835 -- 842}, year = {2021}, abstract = {Communication via serial bus systems, like CAN, plays an important role for all kinds of embedded electronic and mechatronic systems. To cope up with the requirements for functional safety of safety-critical applications, there is a need to enhance the safety features of the communication systems. One measure to achieve a more robust communication is to add redundant data transmission path to the applications. In general, the communication of real-time embedded systems like automotive applications is tethered, and the redundant data transmission lines are also tethered, increasing the size of the wiring harness and the weight of the system. A radio link is preferred as a redundant transmission line as it uses a complementary transmission medium compared to the wired solution and in addition reduces wiring harness size and weight. Standard wireless links like Wi-Fi or Bluetooth cannot meet the requirements for real-time capability with regard to bus communication. Using the new dual-mode radio enables a redundant transmission line meeting all requirements with regard to real-time capability, robustness and transparency for the data bus. In addition, it provides a complementary transmission medium with regard to commonly used tethered links. A CAN bus system is used to demonstrate the redundant data transfer via tethered and wireless CAN.}, language = {en} } @article{Hagemann1978, author = {Hagemann, Hans-J{\"u}rgen}, title = {Reduction of hysteresis losses of ferroelectric BaTiO3. Hagemann, H. J.}, series = {Ferroelectrics. 22 (1978)}, journal = {Ferroelectrics. 22 (1978)}, isbn = {0015-0193}, pages = {743 -- 743}, year = {1978}, language = {en} } @article{HagemannGeittnerWarnieretal.1985, author = {Hagemann, Hans-J{\"u}rgen and Geittner, P. and Warnier, J. and Weling, F.}, title = {Reduction of geometric taper losses in the PCVD process. Geittner, P.; Hagemann, H. J.; Warnier, J.; Weling, F.; Wilson, H.}, series = {Electronics letters : an intern. publication / The Institution of Electrical Engineers. 21 (1985), H. 13}, journal = {Electronics letters : an intern. publication / The Institution of Electrical Engineers. 21 (1985), H. 13}, isbn = {0013-5194}, pages = {870 -- 871}, year = {1985}, language = {en} } @inproceedings{EndressBragard2017, author = {Endress, Tim and Bragard, Michael}, title = {Recording of efficiency-maps of low-power electric drive systems using a flexible matlab-based test bench}, series = {2017 IEEE 58th International Scientific Conference on Power and Electrical Engineering of Riga Technical University (RTUCON)}, booktitle = {2017 IEEE 58th International Scientific Conference on Power and Electrical Engineering of Riga Technical University (RTUCON)}, publisher = {IEEE}, address = {New York}, isbn = {978-1-5386-3846-0}, doi = {10.1109/RTUCON.2017.8124775}, pages = {5 Seiten}, year = {2017}, abstract = {This paper introduces a hardware setup to measure efficiency maps of low-power electric motors and their associated inverters. Here, the power of the device under test (DUT) ranges from some Watts to a few hundred Watts. The torque and speed of the DUT are measured independent of voltage and current in multiple load points. A Matlab-based software approach in combination with an open Texas-Instruments (TI) hardware setup ensures flexibility. Exemplarily, the efficiency field of a Permanent Magnet Synchronous Machine (PMSM) is measured to proof the concept. Brushless-DC (BLDC) motors can be tested as well. The nomenclature in this paper is based on the new European standard DIN EN 50598. Special attention is paid to the calculation of the measurement error.}, language = {en} } @book{SchubaSpaniolLinnhoffPopien1995, author = {Schuba, Marko and Spaniol, Otto and Linnhoff-Popien, Claudia}, title = {Rechnerstrukturen : Skript zur Vorlesung an der RWTH Aachen / Spaniol, Otto ; Linnhoff-Popien, Claudia ; Schuba, Marko}, publisher = {Verl. der Augustinus-Buchh.}, address = {Aachen}, isbn = {3-86073-147-5}, pages = {V, 134 S. : graph. Darst.}, year = {1995}, language = {de} } @inproceedings{EppleBrandesGligorevicetal.2009, author = {Epple, U. and Brandes, Sinja and Gligorevic, Snjezana and Schnell, Michael}, title = {Receiver optimization for L-DACS1}, series = {IEEE/AIAA 28th Digital Avionics Systems Conference : 23-29 Oct. 2009 : Orlando, Fla.}, booktitle = {IEEE/AIAA 28th Digital Avionics Systems Conference : 23-29 Oct. 2009 : Orlando, Fla.}, organization = {Institute of Electrical and Electronics Engineers}, isbn = {978-1-4244-4078-8}, pages = {4B1-1 -- 4B1-12}, year = {2009}, language = {en} } @article{SchifferFerreinLakemeyer2011, author = {Schiffer, Stefan and Ferrein, Alexander and Lakemeyer, Gerhard}, title = {Reasoning with Qualitative Positional Information for Domestic Domains in the Situation Calculus}, series = {Journal of Intelligent \& Robotic Systems}, volume = {63}, journal = {Journal of Intelligent \& Robotic Systems}, number = {2}, publisher = {Springer}, address = {Berlin}, isbn = {0921-0296}, pages = {273 -- 300}, year = {2011}, language = {en} } @inproceedings{RitschelStenzelCzarneckietal.2021, author = {Ritschel, Konstantin and Stenzel, Adina and Czarnecki, Christian and Hong, Chin-Gi}, title = {Realizing robotic process automation potentials: an architectural perspective on a real-life implementation case}, series = {GI Edition Proceedings Band 314 "INFORMATIK 2021" Computer Science \& Sustainability}, booktitle = {GI Edition Proceedings Band 314 "INFORMATIK 2021" Computer Science \& Sustainability}, editor = {Gesellschaft f{\"u}r Informatik e.V. (GI),}, publisher = {K{\"o}llen}, address = {Bonn}, isbn = {9783885797081}, issn = {1617-5468}, pages = {1303 -- 1311}, year = {2021}, abstract = {The initial idea of Robotic Process Automation (RPA) is the automation of business processes through a simple emulation of user input and output by software robots. Hence, it can be assumed that no changes of the used software systems and existing Enterprise Architecture (EA) is required. In this short, practical paper we discuss this assumption based on a real-life implementation project. We show that a successful RPA implementation might require architectural work during analysis, implementation, and migration. As practical paper we focus on exemplary lessons-learned and new questions related to RPA and EA.}, language = {en} } @inproceedings{EngelsSchnabel2012, author = {Engels, Elmar and Schnabel, Holger}, title = {Rapid-control-prototyping of industrial drives for the sercos automation bus}, series = {13th International Workshop on Mechatronics (MECATRONICS), 2012 9th France-Japan \& 7th Europe-Asia Congress on and Research and Education in Mechatronics (REM)}, booktitle = {13th International Workshop on Mechatronics (MECATRONICS), 2012 9th France-Japan \& 7th Europe-Asia Congress on and Research and Education in Mechatronics (REM)}, isbn = {978-1-4673-4771-6}, pages = {177 -- 181}, year = {2012}, abstract = {This article describes the functionality of a MATLAB® library that can be used to develop motion-logic applications in MATLAB programming language for industrial drive and control systems using the well known sercos automation bus. Therewith MATLAB's functionality is extended to designing automation applications from single axis machines up to multi-kinematic robots.}, language = {en} } @article{NoureddineKraffLaddetal.2019, author = {Noureddine, Yacine and Kraff, Oliver and Ladd, Mark E. and Wrede, Karsten and Chen, Bixia and Quick, Harald H. and Schaefers, Georg and Bitz, Andreas}, title = {Radiofrequency induced heating around aneurysm clips using a generic birdcage head coil at 7 Tesla under consideration of the minimum distance to decouple multiple aneurysm clips}, series = {Magnetic Resonance in Medicine}, journal = {Magnetic Resonance in Medicine}, number = {Early view}, publisher = {Wiley}, address = {Weinheim}, issn = {1522-2594}, doi = {10.1002/mrm.27835}, pages = {1 -- 17}, year = {2019}, language = {en} } @article{HillgaertnerKappel2006, author = {Hillg{\"a}rtner, Michael and Kappel, U.}, title = {Radiating Impedance of Mains Cabling During Emissions Testing}, series = {EMC Europe 2006 Barcelona : International Symposium on Electromagnetic Compatibility; September 4 - 8, 2006, Campus Nord, Technical University of Catalonia, Barcelona, Spain / [organized by Technical University of Catalonia (UPC) ... Ed. and publ. by: Ferran Silva ...]. - Vol. 1: Proceedings 1}, journal = {EMC Europe 2006 Barcelona : International Symposium on Electromagnetic Compatibility; September 4 - 8, 2006, Campus Nord, Technical University of Catalonia, Barcelona, Spain / [organized by Technical University of Catalonia (UPC) ... Ed. and publ. by: Ferran Silva ...]. - Vol. 1: Proceedings 1}, address = {Barcelona}, isbn = {84-689-9439-1}, pages = {17 -- 22}, year = {2006}, language = {en} } @article{SchollPalmLehmannetal.1998, author = {Scholl, Ingrid and Palm, Christoph and Lehmann, Thomas and Spitzer, Klaus}, title = {Quantitative Farbmessung in laryngoskopischen Bildern. Palm, C; Scholl, I; Lehmann, TM; Spitzer, K.}, series = {Bildverarbeitung f{\"u}r die Medizin 1998. Hrsg.: Thomas Lehmann ...}, journal = {Bildverarbeitung f{\"u}r die Medizin 1998. Hrsg.: Thomas Lehmann ...}, publisher = {Springer}, address = {Berlin}, isbn = {3-540-63885-7}, pages = {412 -- 416}, year = {1998}, language = {en} } @article{SchollPalmLehmannetal.1997, author = {Scholl, Ingrid and Palm, Christoph and Lehmann, Thomas Martin and Spitzer, Klaus}, title = {Quantitative Analyse der Stimmlippen}, series = {5. Workshop Digitale Bildverarbeitung in der Medizin : Freiburg, 10. -11. M{\"a}rz 1997 / Universit{\"a}t Freiburg. [Bernhard Arnolds ... (Hrsg.)]}, journal = {5. Workshop Digitale Bildverarbeitung in der Medizin : Freiburg, 10. -11. M{\"a}rz 1997 / Universit{\"a}t Freiburg. [Bernhard Arnolds ... (Hrsg.)]}, publisher = {Zentralstelle f{\"u}r Forschungsf{\"o}rderung und Technologietransfer}, address = {Freiburg}, isbn = {3-9805054-2-1}, pages = {81 -- 86}, year = {1997}, language = {de} } @article{SiepmannSchuhWebersberger1997, author = {Siepmann, Thomas and Schuh, G. and Webersberger, P.}, title = {Qualit{\"a}tshandbuch und Prozesspl{\"a}ne im INTRANET / Schuh, G.; Webersberger, P.; Siepmann, Th.}, series = {Industrie-Management : Zeitschrift f{\"u}r industrielle Gesch{\"a}ftsprozesse (1997)}, journal = {Industrie-Management : Zeitschrift f{\"u}r industrielle Gesch{\"a}ftsprozesse (1997)}, year = {1997}, language = {de} } @article{FerreinSchifferLakemeyer2006, author = {Ferrein, Alexander and Schiffer, Stefan and Lakemeyer, Gerhard}, title = {Qualitative World Models for Soccer Robots / Schiffer, Stefan ; Ferrein, Alexander ; Lakemeyer, Gerhard}, series = {Qualitative constraint calculi : application and integration ; KI 2006, 14 - 19 June 2006, Bremen, Germany ; 29th Annual German Conference on Artificial Intelligence ; workshop / Stefan W{\"o}lfl ... (eds.)}, journal = {Qualitative constraint calculi : application and integration ; KI 2006, 14 - 19 June 2006, Bremen, Germany ; 29th Annual German Conference on Artificial Intelligence ; workshop / Stefan W{\"o}lfl ... (eds.)}, publisher = {Univ.}, address = {Bremen}, isbn = {3-88722-666-6}, pages = {3 -- 14}, year = {2006}, language = {en} } @inproceedings{SchneiderWisselinkCzarnecki2017, author = {Schneider, Dominik and Wisselink, Frank and Czarnecki, Christian}, title = {Qualitative Wertsch{\"o}pfungsanalyse von Anwendungsf{\"a}llen des Narrowband Internet of Things}, series = {Prozesse, Technologie, Anwendungen, Systeme und Management 2017. Angewandte Forschung in der Wirtschaftsinformatik}, booktitle = {Prozesse, Technologie, Anwendungen, Systeme und Management 2017. Angewandte Forschung in der Wirtschaftsinformatik}, editor = {Barton, Thomas and Herrmann, Frank and Meister, Vera G. and M{\"u}ller, Christian and Seel, Christian}, publisher = {mana-Buch}, address = {Heide}, isbn = {978-3-944330-56-3}, pages = {184 -- 193}, year = {2017}, abstract = {Prim{\"a}re Ziele des Internets der Dinge sind die Steuerung physischer Gegenst{\"a}nde aus der Distanz und das Erfassen von Informationen aus dem Umfeld dieser Gegenst{\"a}nde. Dazu werden Hardwarekomponenten in Gegenst{\"a}nde des t{\"a}glichen Lebens und die Umwelt integriert. Mithilfe von Informations- und Kommunikationstechnologien entsteht hieraus das Internet der Dinge (Internet of Things, IoT). Vor einem Jahr wurde mit Narrowband Internet of Things (NB-IoT) eine Technologie die es erm{\"o}glicht, Hardwarekomponenten energieeffizient und unmittelbar {\"u}ber das Mobilfunknetz zu vernetzen. Gegenst{\"a}nde werden dadurch {\"u}ber große Reichweiten eigenst{\"a}ndig kommunikationsf{\"a}hig. Das IoT steht mit NB-IoT vor einem gestiegenen Nutzenpotenzial, da eine zunehmende Anzahl miteinander verbundener Gegenst{\"a}nde und der Austausch gr{\"o}ßerer Datenmengen realisierbar sind. Damit sind aus wirtschaftlicher Sicht neue, innovative Anwendungsf{\"a}lle des IoT m{\"o}glich, die auch bereits in der Praxis diskutiert werden. In diesem Beitrag wird anhand eines konkreten Anwendungsfalls untersucht, welche neuen Gesch{\"a}fts- bzw. Partnermodelle durch die gemeinsame Nutzung von NB-IoT-Daten und Big Data-Technologien entstehen und welcher qualitative Mehrwert f{\"u}r die an einem Anwendungsfall beteiligten Stakeholder geschaffen wird. Dazu wird - einem konstruktionsorientierten Forschungsansatz folgend - ein Bewertungsrahmen zur qualitativen Wertsch{\"o}pfungsanalyse von NB-IoT entwickelt, der u.a. auf der Schablone nach Cockburn und dem Business Model Canvas basiert. Anhand dieses Bewertungsrahmens wird ein Anwendungsfall untersucht, der in anonymisierter Form an konkrete Praxisprojekte angelehnt ist. Konkret wird ein Anwendungsfall betrachtet, der einen Fahrradverleih 2.0 basierend auf dem Einsatz von NB-IoT vorschl{\"a}gt. Aus den Untersuchungsergebnissen gehen beispielsweise Erkenntnisse hervor, wie Gesch{\"a}ftsmodelle auf}, language = {de} } @article{WolfSimonSchlick1998, author = {Wolf, Martin and Simon, S. and Schlick, Christopher}, title = {Qualitative and Quantitative Analysis of Cooperation / Wolf, M. ; Simon, S. ; Schlick, C.}, series = {Proceedings : May 26 - 29, 1998, Cannes (France) = Actes : 26 - 29 mai 1998 / INRIA, Institut National de Recherche en Informatique et en Automatique, Unit{\´e} de recherche ... F. Darses ..., eds}, journal = {Proceedings : May 26 - 29, 1998, Cannes (France) = Actes : 26 - 29 mai 1998 / INRIA, Institut National de Recherche en Informatique et en Automatique, Unit{\´e} de recherche ... F. Darses ..., eds}, publisher = {-}, address = {Cannes}, pages = {1 -- 5}, year = {1998}, language = {en} } @article{SchubaSchneiderHaverkort1998, author = {Schuba, Marko and Schneider, Gaby and Haverkort, Boudewijn R.}, title = {QNA-MC: A Performance Evaluation Tool for Communication Networks with Multicast Data Streams / Schneider, G. ; Schuba, M. ; Haverkort, B. R.}, series = {Computer Performance Evaluation - Modelling Techniques and Tools / Puigjaner, Ramon (eds.)}, journal = {Computer Performance Evaluation - Modelling Techniques and Tools / Puigjaner, Ramon (eds.)}, publisher = {Springer}, address = {Berlin}, isbn = {3-540-64949-2}, pages = {105 -- 116}, year = {1998}, language = {en} } @inproceedings{BuxbaumSchwarteRingbecketal.2000, author = {Buxbaum, Bernd and Schwarte, Rudolf and Ringbeck, Thorsten and [u.a.],}, title = {Pseudo-Noise Laserradar zur schnellen 3D-Aufnahme auf Basis der PMD-Smart-Pixel Technologie - Prinzip und experimentelle Verifikation}, series = {Bildverarbeitung im industriellen Einsatz : Tagung Stuttgart, 18. und 19. Oktober 2000 = Image processing and machine vision / VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik. - (VDI-Berichte ; 1572)}, booktitle = {Bildverarbeitung im industriellen Einsatz : Tagung Stuttgart, 18. und 19. Oktober 2000 = Image processing and machine vision / VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik. - (VDI-Berichte ; 1572)}, publisher = {VDI-Verl.}, address = {D{\"u}sseldorf}, isbn = {3-18-091572-2}, issn = {0083-5560}, pages = {49 -- 59}, year = {2000}, language = {de} } @article{LepersRakePuetter1976, author = {Lepers, Heinrich and Rake, H. and P{\"u}tter, L.}, title = {Prozeßrechnerautomatisierung von W{\"a}rmeprozessen in der Grundstoffindustrie}, series = {Industrie-Anzeiger}, volume = {98}, journal = {Industrie-Anzeiger}, number = {17/18}, publisher = {Konradin}, address = {Leinfelden-Echterdingen}, issn = {0019-9036}, pages = {286 -- 289}, year = {1976}, language = {de} } @article{LepersRakePuetter1976, author = {Lepers, Heinrich and Rake, H. and P{\"u}tter, L.}, title = {Prozeßrechnerautomatisierung von W{\"a}rmeprozessen}, series = {Elektro-Anzeiger}, volume = {29}, journal = {Elektro-Anzeiger}, number = {5}, publisher = {Konradin}, address = {Leinfelden-Echterdingen}, issn = {0013-5518}, pages = {98 -- 101}, year = {1976}, language = {de} } @incollection{HaukCzarneckiDietze2018, author = {Hauk, Joachim and Czarnecki, Christian and Dietze, Christian}, title = {Prozessorientierte Messung der Customer Experience am Beispiel der Telekommunikationsindustrie}, series = {Customer Experience im Zeitalter des Kunden : Best Practices, Lessons Learned und Forschungsergebnisse}, booktitle = {Customer Experience im Zeitalter des Kunden : Best Practices, Lessons Learned und Forschungsergebnisse}, editor = {Rusnjak, Andreas and Schallmo, Daniel R. A.}, publisher = {Springer Gabler}, address = {Wiesbaden}, isbn = {978-3-658-18961-7}, doi = {10.1007/978-3-658-18961-7_7}, pages = {195 -- 216}, year = {2018}, abstract = {Hohe Wettbewerbsintensit{\"a}t und gestiegene Kundenanforderungen erfordern bei Telekommunikationsunternehmen eine aktive Gestaltung der Customer Experience (CX). Ein wichtiger Aspekt dabei ist die CX-Messung. Traditionelle Zufriedenheitsmessungen sind oft nicht ausreichend, um die Kundenerfahrung in komplexen Prozessen vollst{\"a}ndig zu erfassen. Daher wird in diesem Kapitel eine prozess{\"u}bergreifende Referenzl{\"o}sung zur CX-Messung am Beispiel der Telekommunikationsindustrie vorgeschlagen. Ausgangspunkt ist ein industriespezifisches Prozessmodell, das sich an dem Referenzmodell eTOM orientiert. Dieses wird um Messpunkte erweitert, die Schwachstellen in Bezug auf die CX identifizieren. F{\"u}r die erkannten Schwachstellen werden {\"u}ber eine Referenzmatrix m{\"o}gliche Ausl{\"o}ser abgeleitet und anhand von typischen Gesch{\"a}ftsfallmengen bewertet. Somit ist eine direkte Zuordnung und Erfolgsmessung konkreter Maßnahmen zur Behebung der Schwachstellen m{\"o}glich. Die so entwickelte Referenzl{\"o}sung wurde im Projekt K1 bei der Deutschen Telekom erfolgreich umgesetzt. Details zur Umsetzung werden als Fallstudien dargestellt.}, language = {de} } @book{GunnarBartonBeigeletal.2017, author = {Gunnar, Auth and Barton, Thomas and Beigel, Stefan and Bensberg, Frank and Brehm, Lars and Wolf, Martin}, title = {Prozesse, Technologie, Anwendungen, Systeme und Management 2017}, editor = {Barton, Thomas and Herrmann, Frank and Meister, Vera G. and M{\"u}ller, Christian and Seel, Christian}, publisher = {Mana-Buch}, address = {Heide}, isbn = {978-3-944330-56-3}, pages = {297 Seiten}, year = {2017}, language = {de} } @incollection{CzarneckiAuth2018, author = {Czarnecki, Christian and Auth, Gunnar}, title = {Prozessdigitalisierung durch Robotic 7 Process Automation}, series = {Digitalisierung in Unternehmen: von den theoretischen Ans{\"a}tzen zur praktischen Umsetzung}, booktitle = {Digitalisierung in Unternehmen: von den theoretischen Ans{\"a}tzen zur praktischen Umsetzung}, editor = {Barton, Thomas and M{\"u}ller, Christian and Seel, Christian}, publisher = {Springer}, address = {Wiesbaden}, isbn = {9783658227739}, doi = {10.1007/978-3-658-22773-9_7}, pages = {113 -- 131}, year = {2018}, abstract = {Im Rahmen der digitalen Transformation werden innovative Technologiekonzepte, wie z. B. das Internet der Dinge und Cloud Computing als Treiber f{\"u}r weitreichende Ver{\"a}nderungen von Organisationen und Gesch{\"a}ftsmodellen angesehen. In diesem Kontext ist Robotic Process Automation (RPA) ein neuartiger Ansatz zur Prozessautomatisierung, bei dem manuelle T{\"a}tigkeiten durch sogenannte Softwareroboter erlernt und automatisiert ausgef{\"u}hrt werden. Dabei emulieren Softwareroboter die Eingaben auf der bestehenden Pr{\"a}sentationsschicht, so dass keine {\"A}nderungen an vorhandenen Anwendungssystemen notwendig sind. Die innovative Idee ist die Transformation der bestehenden Prozessausf{\"u}hrung von manuell zu digital, was RPA von traditionellen Ans{\"a}tzen des Business Process Managements (BPM) unterscheidet, bei denen z. B. prozessgetriebene Anpassungen auf Ebene der Gesch{\"a}ftslogik notwendig sind. Am Markt werden bereits unterschiedliche RPA-L{\"o}sungen als Softwareprodukte angeboten. Gerade bei operativen Prozessen mit sich wiederholenden Verarbeitungsschritten in unterschiedlichen Anwendungssystemen sind gute Ergebnisse durch RPA dokumentiert, wie z. B. die Automatisierung von 35 \% der Backoffice-Prozesse bei Telefonica. Durch den vergleichsweise niedrigen Implementierungsaufwand verbunden mit einem hohen Automatisierungspotenzial ist in der Praxis (z. B. Banken, Telekommunikation, Energieversorgung) ein hohes Interesse an RPA vorhanden. Der Beitrag diskutiert RPA als innovativen Ansatz zur Prozessdigitalisierung und gibt konkrete Handlungsempfehlungen f{\"u}r die Praxis. Dazu wird zwischen modellgetriebenen und selbstlernenden Ans{\"a}tzen unterschieden. Anhand von generellen Architekturen von RPA-Systemen werden Anwendungsszenarien sowie deren Automatisierungspotenziale, aber auch Einschr{\"a}nkungen, diskutiert. Es folgt ein strukturierter Markt{\"u}berblick ausgew{\"a}hlter RPA-Produkte. Anhand von drei konkreten Anwendungsbeispielen wird die Nutzung von RPA in der Praxis verdeutlicht.}, language = {de} } @article{NiemuellerFerreinEckeletal.2011, author = {Niem{\"u}ller, Tim and Ferrein, Alexander and Eckel, Gerhard and Pirro, David and Podbregar, Patrick and Kellner, Tobias and Rath, Christoph and Steinbauer, Gerald}, title = {Providing Ground-truth Data for the Nao Robot Platform}, series = {RoboCup 2010: Robot Soccer World Cup XIV}, journal = {RoboCup 2010: Robot Soccer World Cup XIV}, publisher = {Springer}, address = {Berlin}, isbn = {978-3-642-20217-9}, pages = {133 -- 144}, year = {2011}, language = {en} } @techreport{LessenichRitzWallenborn2014, author = {Leßenich, Nina and Ritz, Thomas and Wallenborn, Ramona}, title = {Prototyping zur Verbesserung der Benutzerfreundlichkeit mobiler Software : Potenziale benutzerfreundlicher Software-Entwicklung ; Info-Brosch{\"u}re}, publisher = {eBusiness-Lotse}, address = {Aachen}, pages = {7 S. : Ill., graph. Darst.}, year = {2014}, abstract = {Mobile Anwendungen nehmen mit der Verbreitung von Smartphones zu. Die Akzeptanz der Nutzer bestimmt den Erfolg solcher mobiler Applikationen dabei maßgeblich. Um diese Anerkennung zu schaffen, ist eine m{\"o}glichst hohe Gebrauchstauglichkeit, auch Usability genannt, notwendig. Die Informationsbrosch{\"u}re „Prototyping zur Verbesserung der Benutzerfreundlichkeit mobiler Software" richtet sich an Personen, die an der Gestaltung und entwicklung von (mobiler) Software beteiligt sind. In dieser Brosch{\"u}re werden m{\"o}gliche Potenziale im Bereich einer effizienten und benutzerzentrierten Software-Entwicklung aufgezeigt.}, language = {de} } @book{BochmannRitz2013, author = {Bochmann, Sandra and Ritz, Thomas}, title = {Prototyping tools for mobile applications}, publisher = {Steinbeis-Ed.}, address = {Stuttgart}, isbn = {978-3-943356-45-8}, pages = {234 S. : Ill., graph. Darst.}, year = {2013}, language = {en} } @article{CollPeralesSchulteTiggesRondinoneetal.2022, author = {Coll-Perales, Baldomero and Schulte-Tigges, Joschua and Rondinone, Michele and Gozalvez, Javier and Reke, Michael and Matheis, Dominik and Walter, Thomas}, title = {Prototyping and evaluation of infrastructure-assisted transition of control for cooperative automated vehicles}, series = {IEEE Transactions on Intelligent Transportation Systems}, volume = {23}, journal = {IEEE Transactions on Intelligent Transportation Systems}, number = {7}, publisher = {IEEE}, issn = {1524-9050 (Print)}, doi = {10.1109/TITS.2021.3061085}, pages = {6720 -- 6736}, year = {2022}, abstract = {Automated driving is now possible in diverse road and traffic conditions. However, there are still situations that automated vehicles cannot handle safely and efficiently. In this case, a Transition of Control (ToC) is necessary so that the driver takes control of the driving. Executing a ToC requires the driver to get full situation awareness of the driving environment. If the driver fails to get back the control in a limited time, a Minimum Risk Maneuver (MRM) is executed to bring the vehicle into a safe state (e.g., decelerating to full stop). The execution of ToCs requires some time and can cause traffic disruption and safety risks that increase if several vehicles execute ToCs/MRMs at similar times and in the same area. This study proposes to use novel C-ITS traffic management measures where the infrastructure exploits V2X communications to assist Connected and Automated Vehicles (CAVs) in the execution of ToCs. The infrastructure can suggest a spatial distribution of ToCs, and inform vehicles of the locations where they could execute a safe stop in case of MRM. This paper reports the first field operational tests that validate the feasibility and quantify the benefits of the proposed infrastructure-assisted ToC and MRM management. The paper also presents the CAV and roadside infrastructure prototypes implemented and used in the trials. The conducted field trials demonstrate that infrastructure-assisted traffic management solutions can reduce safety risks and traffic disruptions.}, language = {en} } @article{KlompBitzHeerschapetal.2009, author = {Klomp, D. W. J. and Bitz, Andreas and Heerschap, A. and Scheenen, T. W. J.}, title = {Proton spectroscopic imaging of the human prostate at 7 T}, series = {NMR in Biomedicine}, volume = {22}, journal = {NMR in Biomedicine}, number = {5}, issn = {1099-1492}, doi = {10.1002/nbm.1360}, pages = {495 -- 501}, year = {2009}, language = {en} } @book{FassbenderBuehlerMarkmannetal.2001, author = {Faßbender, Heinz and B{\"u}hler, Gerhard and Markmann, G. and Wunder, M.}, title = {Protokolle zur Replikation verteilter Daten}, publisher = {FGAN-FKIE}, address = {Wachtberg}, year = {2001}, language = {de} } @article{NiemuellerLakemeyerFerreinetal.2013, author = {Niem{\"u}ller, Tim and Lakemeyer, Gerhard and Ferrein, Alexander and Reuter, S. and Ewert, D. and Jeschke, S. and Pensky, D. and Karras, Ulrich}, title = {Proposal for advancements to the LLSF in 2014 and beyond}, pages = {Publ. online}, year = {2013}, language = {en} } @article{SiepmannSchuhLevering1998, author = {Siepmann, Thomas and Schuh, G. and Levering, V.}, title = {PROPLAN / Schuh, G.; Siepmann, Th.; Levering, V.}, series = {Handbook on architectures of information systems : with 24 tables / Peter Bernus ... (ed.)}, journal = {Handbook on architectures of information systems : with 24 tables / Peter Bernus ... (ed.)}, publisher = {Springer}, address = {Berlin [u.a.]}, isbn = {3-540-64453-9}, pages = {IX, 834 S. : graph. Darst.}, year = {1998}, language = {en} } @book{AltSchumny1982, author = {Alt, Helmut and Schumny, Harald}, title = {Programmierung mathematischer Algorithmen (Vieweg-Programmbibliothek Taschenrechner ; 1) / Helmut Alt ; Harald Schumny [Hrsg.]}, publisher = {Vieweg + Teubner}, address = {Wiesbaden}, isbn = {3-528-04211-7}, pages = {92 S.}, year = {1982}, language = {de} } @inproceedings{ElsenHawariJohnen2010, author = {Elsen, Ingo and Hawari, Asma and Johnen, Uwe}, title = {Produktkernel in der Systemintegration (Erfahrungsbericht aus der Praxis)}, series = {Vom Projekt zum Produkt - Fachtagung des GI-Fachausschusses Management der Anwendungsentwicklung und -wartung im Fachbereich Wirtschaftsinformatik (WI-MAW), 1. - 3. Dezember 2010 in Aachen}, booktitle = {Vom Projekt zum Produkt - Fachtagung des GI-Fachausschusses Management der Anwendungsentwicklung und -wartung im Fachbereich Wirtschaftsinformatik (WI-MAW), 1. - 3. Dezember 2010 in Aachen}, editor = {Pietsch, Wolfram and Krams, Benedikt}, publisher = {Gesellschaft f{\"u}r Informatik eV}, address = {Bonn}, isbn = {9783885792727}, issn = {1617-5468}, pages = {93 -- 102}, year = {2010}, abstract = {In der Vergangenheit basierten große Systemintegrationsprojekte in der Regel auf Individualentwicklungen f{\"u}r einzelne Kunden. Getrieben durch Kostendruck steigt aber der Bedarf nach standardisierten L{\"o}sungen, die gleichzeitig die individuellen Anforderungen des jeweiligen Umfelds ber{\"u}cksichtigen. T-Systems GEI GmbH wird beiden Anforderungen mit Produktkerneln gerecht. Neben den technischen Aspekten der Kernelentwicklung spielen besonders organisatorische Aspekte eine Rolle, um Kernel effizient und qualitativ hochwertig zu entwickeln, ohne deren Funktionalit{\"a}ten ins Uferlose wachsen zu lassen. Umgesetzt hat T-Systems dieses Konzept f{\"u}r Flughafeninformationssysteme. Damit kann dem wachsenden Bedarf der Flughafenbetreiber nach einer effizienten und kosteng{\"u}nstigen Softwarel{\"o}sung zur Unterst{\"u}tzung Ihrer Gesch{\"a}ftsprozesse entsprochen werden.}, language = {de} } @inproceedings{Ritz2001, author = {Ritz, Thomas}, title = {Produktion von kundenindividuellen Informationsdienstleistungen}, series = {Workshop Internetbasierte Vertriebsunterst{\"u}tzung in der Praxis : 26. April 2001, Institutszentrum Stuttgart der Fraunhofer-Gesellschaft (IZS) / Fraunhofer Institut Arbeitswirtschaft und Organisation}, booktitle = {Workshop Internetbasierte Vertriebsunterst{\"u}tzung in der Praxis : 26. April 2001, Institutszentrum Stuttgart der Fraunhofer-Gesellschaft (IZS) / Fraunhofer Institut Arbeitswirtschaft und Organisation}, editor = {Zabel, Armin}, publisher = {Fraunhofer IAO}, address = {Stuttgart}, pages = {4 S.}, year = {2001}, language = {de} } @inproceedings{Ritz2003, author = {Ritz, Thomas}, title = {Production and distribution of personalized information services employing mass customization}, series = {2nd Interdisciplinary World Congress on Mass Customization and Personalization : MCPC'03, October 6 - 8, 2003, Technische Universit{\"a}t M{\"u}nchen, Munic, Germany}, booktitle = {2nd Interdisciplinary World Congress on Mass Customization and Personalization : MCPC'03, October 6 - 8, 2003, Technische Universit{\"a}t M{\"u}nchen, Munic, Germany}, edition = {CD-Ausg.}, publisher = {Techn. Univ. (TUM)}, address = {M{\"u}nchen}, pages = {Part IV}, year = {2003}, language = {en} } @inproceedings{GrothofSchwarteBuxbaumetal.2002, author = {Grothof, M. and Schwarte, Rudolf and Buxbaum, Bernd and Ringbeck, Thorsten and [u.a.],}, title = {Product monitoring with MSM-PMD-Array}, series = {Proceedings / OPTO 2002 : an event of the Association for Sensor Technology AMA ; 14 - 16 May 2002, Exhibition Centre Erfurt, Germany / International Conference Optoelectronics, Optical Sensors \& Measuring Techniques}, booktitle = {Proceedings / OPTO 2002 : an event of the Association for Sensor Technology AMA ; 14 - 16 May 2002, Exhibition Centre Erfurt, Germany / International Conference Optoelectronics, Optical Sensors \& Measuring Techniques}, editor = {Wagner, Elmar}, publisher = {AMA Service GmbH}, address = {Wunsdorf}, pages = {41 -- 47}, year = {2002}, language = {en} } @incollection{StengerAltherrMuelleretal.2018, author = {Stenger, David and Altherr, Lena and M{\"u}ller, Tankred and Pelz, Peter F.}, title = {Product family design optimization using model-based engineering techniques}, series = {Operations Research Proceedings 2017}, booktitle = {Operations Research Proceedings 2017}, publisher = {Springer}, address = {Cham}, isbn = {978-3-319-89919-0}, doi = {10.1007/978-3-319-89920-6_66}, pages = {495 -- 502}, year = {2018}, abstract = {Highly competitive markets paired with tremendous production volumes demand particularly cost efficient products. The usage of common parts and modules across product families can potentially reduce production costs. Yet, increasing commonality typically results in overdesign of individual products. Multi domain virtual prototyping enables designers to evaluate costs and technical feasibility of different single product designs at reasonable computational effort in early design phases. However, savings by platform commonality are hard to quantify and require detailed knowledge of e.g. the production process and the supply chain. Therefore, we present and evaluate a multi-objective metamodel-based optimization algorithm which enables designers to explore the trade-off between high commonality and cost optimal design of single products.}, language = {en} }