@inproceedings{LindnerKolbRingbeck2008,
  author    = {Lindner, Marvin and Kolb, Andreas and Ringbeck, Thorsten},
  title     = {New insights into the calibration of ToF-sensors},
  series = {2008 IEEE Computer Society Conference on Computer Vision and Pattern Recognition workshops : Anchorage, AK, 23 - 28 June 2008},
  booktitle = {2008 IEEE Computer Society Conference on Computer Vision and Pattern Recognition workshops : Anchorage, AK, 23 - 28 June 2008},
  publisher = {IEEE Service Center},
  address   = {Piscataway, NJ},
  isbn      = {978-1-4244-2339-2},
  pages     = {1 -- 5},
  year      = {2008},
  abstract  = {Time-of-flight (ToF) sensors have become an alternative to conventional distance sensing techniques like laser scanners or image based stereo. ToF sensors provide full range distance information at high frame-rates and thus have a significant impact onto current research in areas like online object recognition, collision prevention or scene reconstruction. However, ToF cameras like the photonic mixer device (PMD) still exhibit a number of challenges regarding static and dynamic effects, e.g. systematic distance errors and motion artefacts, respectively. Sensor calibration techniques reducing static system errors have been proposed and show promising results. However, current calibration techniques in general need a large set of reference data in order to determine the corresponding parameters for the calibration model. This paper introduces a new calibration approach which combines different demodulation techniques for the ToF- camera 's reference signal. Examples show, that the resulting combined demodulation technique yields improved distance values based on only two required reference data sets.},
  language  = {en}
}
@inproceedings{PenneProfittlichRingbecketal.2010,
  author    = {Penne, Jochen and Profittlich, Martin and Ringbeck, Thorsten and Buxbaum, Bernd},
  title     = {Touchless detailed 3D scan of human hand anatomy using time-of-flight cameras},
  series = {Proceedings of the International Conference on 3D Body Scanning Technologies : Lugano, Switzerland, 19-20 October 2010},
  booktitle = {Proceedings of the International Conference on 3D Body Scanning Technologies : Lugano, Switzerland, 19-20 October 2010},
  editor    = {D, Nicola D'Apuzzo},
  publisher = {Hometrica Consulting},
  address   = {Z{\"u}rich},
  isbn      = {978-3-033-02714-5},
  pages     = {361 -- 369},
  year      = {2010},
  language  = {en}
}
@inproceedings{EngelsSchnabel2012,
  author    = {Engels, Elmar and Schnabel, Holger},
  title     = {Rapid-control-prototyping of industrial drives for the sercos automation bus},
  series = {13th International Workshop on Mechatronics (MECATRONICS), 2012 9th France-Japan \& 7th Europe-Asia Congress on and Research and Education in Mechatronics (REM)},
  booktitle = {13th International Workshop on Mechatronics (MECATRONICS), 2012 9th France-Japan \& 7th Europe-Asia Congress on and Research and Education in Mechatronics (REM)},
  isbn      = {978-1-4673-4771-6},
  pages     = {177 -- 181},
  year      = {2012},
  abstract  = {This article describes the functionality of a MATLAB® library that can be used to develop motion-logic applications in MATLAB programming language for industrial drive and control systems using the well known sercos automation bus. Therewith MATLAB's functionality is extended to designing automation applications from single axis machines up to multi-kinematic robots.},
  language  = {en}
}
@inproceedings{Engels2013,
  author    = {Engels, Elmar},
  title     = {Industrieantriebe mit sercos Schnittstelle {\"u}ber MATLAB steuern},
  series = {Tagungsband AALE 2013 : das Forum f{\"u}r Fachleute der Automatisierungstechnik aus Hochschulen und Wirtschaft ; 10. Fachkonferenz, Stralsund},
  booktitle = {Tagungsband AALE 2013 : das Forum f{\"u}r Fachleute der Automatisierungstechnik aus Hochschulen und Wirtschaft ; 10. Fachkonferenz, Stralsund},
  publisher = {DIV Dt. Industrieverl.},
  address   = {M{\"u}nchen},
  isbn      = {978-3-8356-3364-3},
  pages     = {223 -- 232},
  year      = {2013},
  language  = {de}
}
@inproceedings{SchoppNachtrodtHeuermannetal.2012,
  author    = {Schopp, Christoph and Nachtrodt, Frederik and Heuermann, Holger and Scherer, Ulrich W. and Mostacci, Domiziano and Finger, Torsten and Tietsch, Wolfgang},
  title     = {A novel 2.45 GHz/200 W Microwave Plasma Jet for High Temperature Applications above 3600 K},
  series = {Journal of Physics : Conference Series},
  volume    = {406},
  booktitle = {Journal of Physics : Conference Series},
  number    = {012029},
  issn      = {1742-6596},
  pages     = {5},
  year      = {2012},
  language  = {en}
}
@inproceedings{LogenHoefkenSchuba2012,
  author    = {Logen, Steffen and H{\"o}fken, Hans and Schuba, Marko},
  title     = {Simplifying RAM Forensics : A GUI and Extensions for the Volatility Framework},
  series = {2012 Seventh International Conference on Availability, Reliability and Security (ARES), 20-24 August 2012, Prague, Czech Republic},
  booktitle = {2012 Seventh International Conference on Availability, Reliability and Security (ARES), 20-24 August 2012, Prague, Czech Republic},
  publisher = {IEEE},
  address   = {New York},
  isbn      = {978-1-4673-2244-7},
  doi       = {10.1109/ARES.2012.12},
  pages     = {620 -- 624},
  year      = {2012},
  abstract  = {The Volatility Framework is a collection of tools for the analysis of computer RAM. The framework offers a multitude of analysis options and is used by many investigators worldwide. Volatility currently comes with a command line interface only, which might be a hinderer for some investigators to use the tool. In this paper we present a GUI and extensions for the Volatility Framework, which on the one hand simplify the usage of the tool and on the other hand offer additional functionality like storage of results in a database, shortcuts for long Volatility Framework command sequences, and entirely new commands based on correlation of data stored in the database.},
  language  = {en}
}
@inproceedings{LuszczynskiEngels2012,
  author    = {Luszczynski, K. and Engels, Elmar},
  title     = {Vergleichende Untersuchung zur Topologie von zelloptimalen, elektromobilit{\"a}ts-optimierten Ladungsausgleichsvorrichtungen},
  series = {Tagungsband zur AALE-Tagung 2012 : 9. Fachkonferenz},
  booktitle = {Tagungsband zur AALE-Tagung 2012 : 9. Fachkonferenz},
  publisher = {Oldenbourg Industrieverlag},
  address   = {M{\"u}nchen},
  isbn      = {978-3-8356-3305-6},
  pages     = {165 -- 174},
  year      = {2012},
  language  = {de}
}
@inproceedings{EngelsGabler2012,
  author    = {Engels, Elmar and Gabler, T.},
  title     = {Universelle Programmierschnittstelle f{\"u}r Motion-Logic Systeme},
  series = {Tagungsband zur AALE-Tagung 2012 : 9. Fachkonferenz},
  booktitle = {Tagungsband zur AALE-Tagung 2012 : 9. Fachkonferenz},
  publisher = {Oldenbourg Industrieverlag},
  address   = {M{\"u}nchen},
  isbn      = {978-3-8356-3305-6},
  pages     = {37 -- 46},
  year      = {2012},
  language  = {de}
}
@inproceedings{WolfSchlickHerbstetal.1996,
  author    = {Wolf, Martin and Schlick, Christopher and Herbst, D. and Springer, J.},
  title     = {Einflussfaktoren auf den Erfolg von Telekooperation in großen Unternehmen},
  series = {Computer Supported Cooperative Work (CSCW) in großen Unternehmungen : Tagungsband zum Workshop der GI-Fachgruppe 5.5.1 "CSCW in Organisationen" und dem Technologiezentrum Darmstadt der Deutschen Telekom AG vom 09. - 10. Mai 1996},
  booktitle = {Computer Supported Cooperative Work (CSCW) in großen Unternehmungen : Tagungsband zum Workshop der GI-Fachgruppe 5.5.1 "CSCW in Organisationen" und dem Technologiezentrum Darmstadt der Deutschen Telekom AG vom 09. - 10. Mai 1996},
  editor    = {Uellner, Stefan},
  publisher = {Dt. Telekom},
  address   = {Darmstadt},
  pages     = {1 -- 12},
  year      = {1996},
  language  = {de}
}
@inproceedings{WolfWiedenmaierSchlick1998,
  author    = {Wolf, Martin and Wiedenmaier, S. and Schlick, Christopher},
  title     = {Flexible Kooperation durch computergest{\"u}tzte Teamarbeit},
  series = {Groupware und organisatorische Innovation : Tagungsband der Deutschen Fachtagung zu Computer Supported Cooperative Work. - (Berichte des German Chapter of the ACM ; Bd. 51)},
  booktitle = {Groupware und organisatorische Innovation : Tagungsband der Deutschen Fachtagung zu Computer Supported Cooperative Work. - (Berichte des German Chapter of the ACM ; Bd. 51)},
  editor    = {Herrmann, Thomas},
  publisher = {Teubner},
  address   = {Stuttgart},
  isbn      = {3-519-02692-9},
  pages     = {349 -- 350},
  year      = {1998},
  language  = {de}
}
@inproceedings{RitzStrauch2010,
  author    = {Ritz, Thomas and Strauch, Jakob},
  title     = {„Offline Strategie"-Patterns f{\"u}r mobile SOA Prozesse},
  series = {Mobile und ubiquit{\"a}re Informationssysteme : Technologien, Anwendungen und Dienste zur Unterst{\"u}tzung von mobiler Kollaboration ; Proceedings zur 5. Konferenz Mobile und Ubiquit{\"a}re Informationssysteme (MMS 2010) ; 23. - 25. Februar 2010 in G{\"o}ttingen, Germany. - (GI-Edition : Proceedings ; 163)},
  booktitle = {Mobile und ubiquit{\"a}re Informationssysteme : Technologien, Anwendungen und Dienste zur Unterst{\"u}tzung von mobiler Kollaboration ; Proceedings zur 5. Konferenz Mobile und Ubiquit{\"a}re Informationssysteme (MMS 2010) ; 23. - 25. Februar 2010 in G{\"o}ttingen, Germany. - (GI-Edition : Proceedings ; 163)},
  editor    = {Bick, Markus},
  publisher = {Gesellschaft f{\"u}r Informatik},
  address   = {Bonn},
  isbn      = {978-3-88579-257-4},
  pages     = {174 -- 180},
  year      = {2010},
  language  = {de}
}
@inproceedings{RitzFuchs2008,
  author    = {Ritz, Thomas and Fuchs, Britta},
  title     = {Kosten-Nutzen-Bewertungen bei mobilen Anwendungen},
  series = {Mobile und Ubiquit{\"a}re Informationssysteme - Technologien, Prozesse, Marktfahigkeit. Proceedings zur 3. Konferenz Mobile und Ubiquit{\"a}re Informationssysteme (MMS 2008) 26. - 28. Februar 2008, M{\"u}nchen, Germany. - (GI-Edition : Proceedings ; 123) Breitner, Michael H. [Hrsg.]},
  booktitle = {Mobile und Ubiquit{\"a}re Informationssysteme - Technologien, Prozesse, Marktfahigkeit. Proceedings zur 3. Konferenz Mobile und Ubiquit{\"a}re Informationssysteme (MMS 2008) 26. - 28. Februar 2008, M{\"u}nchen, Germany. - (GI-Edition : Proceedings ; 123) Breitner, Michael H. [Hrsg.]},
  editor    = {Breitner, Michael},
  publisher = {Ges. f{\"u}r Informatik},
  address   = {Bonn},
  isbn      = {978-3-88579-217-8},
  pages     = {164 -- 177},
  year      = {2008},
  language  = {de}
}
@inproceedings{DammRitzStrauch2011,
  author    = {Damm, Sebastian and Ritz, Thomas and Strauch, Jakob},
  title     = {Muster und Cloud Computing als Plattformstrategie f{\"u}r mobile Unternehmenssoftware},
  series = {Mobile und ubiquit{\"a}re Informationssysteme : MMS 2011 ; proceedings der 6. Konferenz, 28. Februar 2011 in Kaiserslautern, Deutschland. - (GI-Edition lecture notes in informatics ; 185)},
  booktitle = {Mobile und ubiquit{\"a}re Informationssysteme : MMS 2011 ; proceedings der 6. Konferenz, 28. Februar 2011 in Kaiserslautern, Deutschland. - (GI-Edition lecture notes in informatics ; 185)},
  editor    = {H{\"o}pfner, Hagen},
  publisher = {Ges. f{\"u}r Informatik},
  address   = {Bonn},
  isbn      = {978-3-88579-279-6},
  pages     = {91 -- 104},
  year      = {2011},
  language  = {de}
}
@inproceedings{Ritz2007,
  author    = {Ritz, Thomas},
  title     = {Die benutzerzentrierte Entwicklung mobiler Unternehmenssoftware},
  series = {MMS 2007: Mobilit{\"a}t und mobile Informationssysteme : 2nd conference of GI-Fachgruppe MMS ; March 6th, 2007 in Aachen, Germany},
  booktitle = {MMS 2007: Mobilit{\"a}t und mobile Informationssysteme : 2nd conference of GI-Fachgruppe MMS ; March 6th, 2007 in Aachen, Germany},
  editor    = {K{\"o}nig-Ries, Brigitta},
  publisher = {Ges. f{\"u}r Informatik},
  address   = {Bonn},
  isbn      = {978-3-88579-198-0},
  pages     = {23 -- 35},
  year      = {2007},
  language  = {de}
}
@inproceedings{Ritz2001,
  author    = {Ritz, Thomas},
  title     = {Produktion von kundenindividuellen Informationsdienstleistungen},
  series = {Workshop Internetbasierte Vertriebsunterst{\"u}tzung in der Praxis : 26. April 2001, Institutszentrum Stuttgart der Fraunhofer-Gesellschaft (IZS) / Fraunhofer Institut Arbeitswirtschaft und Organisation},
  booktitle = {Workshop Internetbasierte Vertriebsunterst{\"u}tzung in der Praxis : 26. April 2001, Institutszentrum Stuttgart der Fraunhofer-Gesellschaft (IZS) / Fraunhofer Institut Arbeitswirtschaft und Organisation},
  editor    = {Zabel, Armin},
  publisher = {Fraunhofer IAO},
  address   = {Stuttgart},
  pages     = {4 S.},
  year      = {2001},
  language  = {de}
}
@inproceedings{Ritz2001,
  author    = {Ritz, Thomas},
  title     = {DISMED - an innovation portal for printing and media industry},
  series = {CRIS 2000 : the fifth conference on Current Research Information Systems in Europe, in Helsinki (Finland), 25-27 May 2000},
  booktitle = {CRIS 2000 : the fifth conference on Current Research Information Systems in Europe, in Helsinki (Finland), 25-27 May 2000},
  publisher = {CORDIS Archive},
  address   = {[s.l.]},
  pages     = {9 S. : graph. Darst.},
  year      = {2001},
  language  = {en}
}
@inproceedings{Ritz2001,
  author    = {Ritz, Thomas},
  title     = {Personalized information services : an electronic information commodity and its production},
  series = {Electronic publishing '01 : 2001 in the digital publishing odyssey ; proceedings of an ICCC/IFIP conference held at the University of Kent at Canterbury, Kent, United Kingdom, 5 - 7 July, 2001 ; [proceedings of the Fifth Conference on Electronic Publishing]},
  booktitle = {Electronic publishing '01 : 2001 in the digital publishing odyssey ; proceedings of an ICCC/IFIP conference held at the University of Kent at Canterbury, Kent, United Kingdom, 5 - 7 July, 2001 ; [proceedings of the Fifth Conference on Electronic Publishing]},
  publisher = {IOS Press [u.a.]},
  address   = {Amsterdam},
  isbn      = {1-58603-191-0},
  pages     = {48 -- 58},
  year      = {2001},
  language  = {en}
}
@inproceedings{RitzStender2003,
  author    = {Ritz, Thomas and Stender, Michael},
  title     = {Modellierung von Business-to-Business Gesch{\"a}ftsprozessen im Mobile Commerce},
  series = {Mobile Commerce - Anwendung und Perspektiven : [proceedings zum] 3. Workshop Mobile Commerce, Universit{\"a}t Augsburg, 04.02.2003. - (GI-Edition : Proceedings ; 25)},
  booktitle = {Mobile Commerce - Anwendung und Perspektiven : [proceedings zum] 3. Workshop Mobile Commerce, Universit{\"a}t Augsburg, 04.02.2003. - (GI-Edition : Proceedings ; 25)},
  editor    = {Pousttchi, Key},
  publisher = {Ges. f{\"u}r Informatik},
  address   = {Bonn},
  isbn      = {3-88579-354-7},
  pages     = {27 -- 41},
  year      = {2003},
  language  = {de}
}
@inproceedings{StenderRitz2003,
  author    = {Stender, Michael and Ritz, Thomas},
  title     = {Modeling of business-to-business mobile commerce processes},
  series = {Electronic proceedings / ICPR 17, 17th International Conference on Production Research [Blacksburg, Virginia, USA, August 3 - 7, 2003]},
  booktitle = {Electronic proceedings / ICPR 17, 17th International Conference on Production Research [Blacksburg, Virginia, USA, August 3 - 7, 2003]},
  edition   = {CD-ROM-Ausg.},
  address   = {Blacksburg, Va.},
  isbn      = {0-9721257-3-6},
  year      = {2003},
  language  = {en}
}
@inproceedings{StenderRitz2003,
  author    = {Stender, Michael and Ritz, Thomas},
  title     = {{\"U}berbetriebliche Ad-hoc-Anwendungsintegration im Mobile Business},
  series = {Wirtschaftsinformatik 2003 : Medien, M{\"a}rkte, Mobilit{\"a}t: - Bd. 1},
  booktitle = {Wirtschaftsinformatik 2003 : Medien, M{\"a}rkte, Mobilit{\"a}t: - Bd. 1},
  editor    = {Uhr, Wolfgang},
  publisher = {Physica-Verl.},
  address   = {Heidelberg},
  isbn      = {3-7908-0111-9},
  pages     = {103 -- 118},
  year      = {2003},
  language  = {de}
}