@article{FoersterKicinCambeletal.2002,
  author    = {F{\"o}rster, Arnold and Kicin, S and Cambel, V. and Kuliffayova, M.},
  title     = {Fabrication of GaAs symmetric pyramidal mesas prepared by wet-chemical etching using AlAs interlayer. Kicin, S.; Cambel, V.; Kuliffayova, M.; Gregusova, D.; Kovacova, E.; Novak, J.; Kostic, I.; Forster, A.},
  series = {Journal of Applied Physics. 91 (2002), H. 2},
  journal   = {Journal of Applied Physics. 91 (2002), H. 2},
  isbn      = {1089-7550},
  pages     = {878 -- 880},
  year      = {2002},
  language  = {en}
}
@article{FoersterAdamMikulicsetal.2002,
  author    = {F{\"o}rster, Arnold and Adam, R. and Mikulics, M. and Schelten, J.},
  title     = {Fabrication and subpicosecond optical response of low-temperature-grown GaAs freestanding photoconductive devices. Adam, R.; Mikulics, M.; Forster, A.; Schelten, J.; Siegel, M.; Kordos, P.; Zheng, X.; Wu, S.; Sobolewski, R.},
  series = {Applied Physics Letters. 81 (2002), H. 18},
  journal   = {Applied Physics Letters. 81 (2002), H. 18},
  isbn      = {1077-3118},
  pages     = {3485 -- 3487},
  year      = {2002},
  language  = {en}
}
@article{BirklDiendorferKernetal.2018,
  author    = {Birkl, Josef and Diendorfer, Gerhard and Kern, Alexander and Thern, Stephan},
  title     = {Extrem hohe Blitzstr{\"o}me},
  series = {Elektropraktiker},
  volume    = {72},
  journal   = {Elektropraktiker},
  number    = {3},
  publisher = {Huss Medien},
  address   = {Berlin},
  pages     = {217 -- 225},
  year      = {2018},
  abstract  = {Blitze sind nach wie vor eine enorme Schadensquelle f{\"u}r Personensch{\"a}den, Br{\"a}nde, mechanische Zerst{\"o}rungen und insbesondere auch {\"U}berspannungen. Das zeigen nicht zuletzt aktuelle Statistiken der Schadensversicherer. Immer wieder gibt es Meldungen {\"u}ber extrem hohe Blitzstr{\"o}me, die nat{\"u}rlich auch zu großen Sch{\"a}den und Zerst{\"o}rungen f{\"u}hren k{\"o}nnen. Dabei werden Scheitelwerte von teilweise deutlich {\"u}ber 300 kA genannt. Dies wirft Fragen auf, da die „klassische" Blitzstatistik (z. B. nach CIGRE und IEC [8][10]) bisher solche Werte nicht kennt. Diese extremen Blitzstr{\"o}me werden meist aus den Daten von Blitzortungssystemen ermittelt.},
  language  = {de}
}
@article{Mueller2004,
  author    = {M{\"u}ller, Burghard},
  title     = {Export in den Iran, Libanon und nach Indien : die FH Aachen strebt nach Osten},
  series = {Die neue Hochschule : Nachrichten, Meinungen, Berichte. 45 (2004), H. 4-5},
  journal   = {Die neue Hochschule : Nachrichten, Meinungen, Berichte. 45 (2004), H. 4-5},
  isbn      = {0340-448x},
  pages     = {12 -- 15},
  year      = {2004},
  language  = {de}
}
@article{BreitbachSchubertAhmed1987,
  author    = {Breitbach, Gerd and Schubert, F. and Ahmed, K.},
  title     = {Experimentelle und theoretische Untersuchungen zum Kriechbeulen von Rohren aus Ni Cr 22 Co 12 Mo bei 950 Cel / F. Schubert ; K. Ahmed ; G. Breitbach ...},
  series = {Sicherheit und Verf{\"u}gbarkeit in der Anlagentechnik mit dem Schwerpunkt der Beitrag der Komponenten- und Grossprobenpr{\"u}fung zur Beurteilung von Bauteilen und Anlagen : [8. - 9. Oktober 1987] / Staatliche Materialpr{\"u}fungsanstalt Universit{\"a}t Stuttgart. - Bd. 2 : Rohrleitungsversagen, Komponenten, Thermoschock, Hochtemperaturverhalten, Beh{\"a}lterintegrit{\"a}t, Schweissverbindungen : (Vortr{\"a}ge 29 - 51)},
  journal   = {Sicherheit und Verf{\"u}gbarkeit in der Anlagentechnik mit dem Schwerpunkt der Beitrag der Komponenten- und Grossprobenpr{\"u}fung zur Beurteilung von Bauteilen und Anlagen : [8. - 9. Oktober 1987] / Staatliche Materialpr{\"u}fungsanstalt Universit{\"a}t Stuttgart. - Bd. 2 : Rohrleitungsversagen, Komponenten, Thermoschock, Hochtemperaturverhalten, Beh{\"a}lterintegrit{\"a}t, Schweissverbindungen : (Vortr{\"a}ge 29 - 51)},
  publisher = {MPA},
  address   = {Stuttgart},
  pages     = {42.1 -- 42.18},
  year      = {1987},
  language  = {de}
}
@article{KuhlmannButenwegBettzieche2006,
  author    = {Kuhlmann, Wolfram and Butenweg, Christoph and Bettzieche, Volker},
  title     = {Experimentelle und numerische Untersuchungen zur baudynamischen Beurteilung von Talsperren},
  series = {Wasserwirtschaft : Hydrologie, Wasserbau, Hydromechanik, Gew{\"a}sser, {\"O}kologie, Boden},
  volume    = {Band 96},
  journal   = {Wasserwirtschaft : Hydrologie, Wasserbau, Hydromechanik, Gew{\"a}sser, {\"O}kologie, Boden},
  number    = {Heft 5},
  issn      = {0043-0978 (E-Journal); 0043-0978 (Print)},
  pages     = {10 -- 16},
  year      = {2006},
  language  = {de}
}
@article{ArpshofenGerlingSommeretal.1981,
  author    = {Arpshofen, Ingo and Gerling, Ulrich and Sommer, Ferdinand and Schultheiss, Emil and Predel, Bruno and Pool, M. J.},
  title     = {Experimentelle Bestimmung der integralen Mischungsenthalpien in den bin{\"a}ren Systemen Pd-Cu und Si-Cu bei 1600 K},
  series = {Zeitschrift f{\"u}r Metallkunde : international journal of materials research and advanced techniques. Bd. 72, H. 12},
  journal   = {Zeitschrift f{\"u}r Metallkunde : international journal of materials research and advanced techniques. Bd. 72, H. 12},
  issn      = {0044-3093 ; 0179-4841},
  pages     = {842 -- 846},
  year      = {1981},
  language  = {de}
}
@article{MarinkovićButenweg2022,
  author    = {Marinković, Marko and Butenweg, Christoph},
  title     = {Experimental testing of decoupled masonry infills with steel anchors for out-of-plane support under combined in-plane and out-of-plane seismic loading},
  series = {Construction and Building Materials},
  volume    = {318},
  journal   = {Construction and Building Materials},
  number    = {1},
  editor    = {Ford, Michael C.},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1879-0526},
  doi       = {10.1016/j.conbuildmat.2021.126041},
  year      = {2022},
  abstract  = {Because of simple construction process, high energy efficiency, significant fire resistance and excellent sound isolation, masonry infilled reinforced concrete (RC) frame structures are very popular in most of the countries in the world, as well as in seismic active areas. However, many RC frame structures with masonry infills were seriously damaged during earthquake events, as the traditional infills are generally constructed with direct contact to the RC frame which brings undesirable infill/frame interaction. This interaction leads to the activation of the equivalent diagonal strut in the infill panel, due to the RC frame deformation, and combined with seismically induced loads perpendicular to the infill panel often causes total collapses of the masonry infills and heavy damages to the RC frames. This fact was the motivation for developing different approaches for improving the behaviour of masonry infills, where infill isolation (decoupling) from the frame has been more intensively studied in the last decade. In-plane isolation of the infill wall reduces infill activation, but causes the need for additional measures to restrain out-of-plane movements. This can be provided by installing steel anchors, as proposed by some researchers. Within the framework of European research project INSYSME (Innovative Systems for Earthquake Resistant Masonry Enclosures in Reinforced Concrete Buildings) the system based on a use of elastomers for in-plane decoupling and steel anchors for out-of-plane restrain was tested. This constructive solution was tested and deeply investigated during the experimental campaign where traditional and decoupled masonry infilled RC frames with anchors were subjected to separate and combined in-plane ‬and out-of-plane loading. Based on a detailed evaluation and comparison of the test results, the performance and effectiveness of the developed system are illustrated.},
  language  = {en}
}
@article{ButenwegMarinkovicSalatic2019,
  author    = {Butenweg, Christoph and Marinkovic, Marko and Salatic, Ratko},
  title     = {Experimental results of reinforced concrete frames with masonry infills under combined quasi-static in-plane and out-of-plane seismic loading},
  series = {Bulletin of Earthquake Engineering},
  volume    = {17},
  journal   = {Bulletin of Earthquake Engineering},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1573-1456},
  doi       = {10.1007/s10518-019-00602-7},
  pages     = {3397 -- 3422},
  year      = {2019},
  language  = {en}
}
@article{HoffschmidtPitzPaalBoehmer1997,
  author    = {Hoffschmidt, Bernhard and Pitz-Paal, R. and B{\"o}hmer, M.},
  title     = {Experimental and numerical evaluation of the performance and flow stability of different types of open volumetric absorbers under non-homogeneous irradiation / R. Pitz-Pahl ; B. Hofschmidt ; M. B{\"o}hmer ...},
  series = {Solar energy. 60 (1997), H. 3-4},
  journal   = {Solar energy. 60 (1997), H. 3-4},
  isbn      = {0038-092X},
  pages     = {135 -- 150},
  year      = {1997},
  language  = {en}
}
@article{VelrajSeenirajHafneretal.1997,
  author    = {Velraj, R. and Seeniraj, R. V. and Hafner, B. and Faber, Christian and Schwarzer, Klemens},
  title     = {Experimental analysis and numerical modelling of inward solidification on a finned vertical tube for a latent heat storage unit},
  series = {Solar energy. 60 (1997), H. 5},
  journal   = {Solar energy. 60 (1997), H. 5},
  isbn      = {0038-092X},
  pages     = {281 -- 290},
  year      = {1997},
  language  = {en}
}
@article{SteuerDankertGilmartinMulleretal.2019,
  author    = {Steuer-Dankert, Linda and Gilmartin, Shannon K. and Muller, Carol B. and Dungs, Carolin and Sheppard, Sheri and Leicht-Scholten, Carmen},
  title     = {Expanding engineering limits : a concept for socially responsible education of engineers},
  series = {The international journal of engineering education},
  volume    = {35},
  journal   = {The international journal of engineering education},
  number    = {2},
  isbn      = {0949-149X},
  pages     = {658 -- 673},
  year      = {2019},
  language  = {en}
}
@article{Kuperjans1996,
  author    = {Kuperjans, Isabel},
  title     = {Exergetische und exergo{\"o}konomische Analyse thermischer Prozesse},
  series = {Arbeitsbericht / Institut f{\"u}r Wirtschaftswissenschaften, Rheinisch-Westf{\"a}lische Technische Hochschule Aachen},
  journal   = {Arbeitsbericht / Institut f{\"u}r Wirtschaftswissenschaften, Rheinisch-Westf{\"a}lische Technische Hochschule Aachen},
  number    = {06},
  year      = {1996},
  language  = {de}
}
@article{Helsper1979,
  author    = {Helsper, Christoph},
  title     = {Evaluation of Particle Size Distributions by Means of Particle Counters / Fißan, H. J. ; Helsper, C.},
  series = {Proceedings of the First Workshop of Particulate Control : 16. - 17. March 1978, Kernforschung-sanlage J{\"u}lich GmbH / prepared by U.S. Environmental Protection Agency, Off. of Research and Development, Washington, D.C, 1979,},
  journal   = {Proceedings of the First Workshop of Particulate Control : 16. - 17. March 1978, Kernforschung-sanlage J{\"u}lich GmbH / prepared by U.S. Environmental Protection Agency, Off. of Research and Development, Washington, D.C, 1979,},
  publisher = {Zentralbibliothek d. Kernforschungsanlage J{\"u}lich [in Komm.]},
  address   = {J{\"u}lich},
  pages     = {495 S.: Ill., graph. Darst.},
  year      = {1979},
  language  = {en}
}
@article{FoersterLayetLueth1989,
  author    = {F{\"o}rster, Arnold and Layet, J. M. and L{\"u}th, H.},
  title     = {Evaluation of dopant profiles and diffusion constants by means of electron energy loss spectroscopy},
  series = {Applied Surface Science. 41 - 42 (1989)},
  journal   = {Applied Surface Science. 41 - 42 (1989)},
  isbn      = {0169-4332},
  pages     = {306 -- 311},
  year      = {1989},
  language  = {en}
}
@article{ButenwegMeyerFehling2014,
  author    = {Butenweg, Christoph and Meyer, Udo and Fehling, Ekkehard},
  title     = {EU-Projekt INSYSME: Innovative Techniken f{\"u}r erdbebensichere Ausfachungsw{\"a}nde aus Ziegelmauerwerk in Stahlbetonrahmentragwerken},
  series = {Mauerwerk : European journal of masonry},
  volume    = {18},
  journal   = {Mauerwerk : European journal of masonry},
  number    = {2},
  publisher = {Ernst \& Sohn},
  address   = {Berlin},
  issn      = {1437-1022 (E-Journal); 1432-3427 (Print)},
  doi       = {10.1002/dama.201400612},
  pages     = {78 -- 81},
  year      = {2014},
  abstract  = {Am 1. Oktober 2013 ist das auf drei Jahre angelegte EU-Forschungsprojekt INSYSME - Innovative Systeme f{\"u}r erdbebentaugliche Ausfachungsw{\"a}nde aus Ziegelmauerwerk in Stahlbetonrahmentragwerken - gestartet. Unter der Koordination der Universit{\"a}t Padua beteiligen sich 16 Partner aus sechs europ{\"a}ischen L{\"a}ndern (Deutschland, Griechenland, Italien, Portugal, Rum{\"a}nien, T{\"u}rkei). Als deutsche Partner nehmen die Arbeitsgemeinschaft Mauerziegel aus Bonn, die Universit{\"a}t Kassel sowie das Ingenieurb{\"u}ro SDA-engineering GmbH aus Herzogenrath, teil. Ziel der deutschen Partner ist die Entwicklung von innovativen Ausfachungssystemen aus monolithischem w{\"a}rmed{\"a}mmenden Ziegelmauerwerk, mit denen nicht nur eine erh{\"o}hte Erdbebensicherheit, sondern auch die sichere Erf{\"u}llung der steigenden Anforderungen aus Windbeanspruchungen gew{\"a}hrleistet werden k{\"o}nnen. Die Forschungsergebnisse sollen vom Partner SDA-engineering GmbH in die bereits seit einigen Jahren verf{\"u}gbare Softwarel{\"o}sung MINEA [1] integriert werden. Weitere Informationen stehen auf den Websites des Projektes [2] zur Verf{\"u}gung. Im vorliegenden Beitrag werden nach einer kurzen thematischen Einf{\"u}hrung die Ergebnisse von Tastversuchen an senkrecht zur Ebene belasteten Ausfachungsw{\"a}nden aus Planziegelmauerwerk vorgestellt. Im Anschluss wird das geplante Arbeitsprogramm der deutschen Partner im Projekt INSYSME beschrieben.},
  language  = {de}
}
@article{MeyerButenwegFehling2014,
  author    = {Meyer, Udo and Butenweg, Christoph and Fehling, Ekkehard},
  title     = {EU-Projekt INSYSME : innovative Systeme f{\"u}r erdbebentaugliche Ausfachungsw{\"a}nde aus Ziegelmauerwerk},
  series = {Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen ; offizielle Zeitschrift der VDI-Gesellschaft Bautechnik. Beilage: D-A-CH-Mitteilungsblatt},
  volume    = {89 (2014)},
  journal   = {Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen ; offizielle Zeitschrift der VDI-Gesellschaft Bautechnik. Beilage: D-A-CH-Mitteilungsblatt},
  number    = {April},
  publisher = {VDI Fachmedien},
  address   = {D{\"u}sseldorf},
  issn      = {1436-4867 (E-Journal); 0005-6650 (Print)},
  pages     = {S14 -- S15},
  year      = {2014},
  language  = {de}
}
@article{HelsperMoelter1989,
  author    = {Helsper, Christoph and M{\"o}lter, L.},
  title     = {Erzeugung von Pr{\"u}faerosolen f{\"u}r die Kalibrierung von optischen Partikelmeßverfahren nach VDI 3491},
  series = {Technisches Messen. 56 (1989)},
  journal   = {Technisches Messen. 56 (1989)},
  isbn      = {0171-8096},
  pages     = {229 -- 234},
  year      = {1989},
  language  = {en}
}
@article{Kern1998,
  author    = {Kern, Alexander},
  title     = {Ert{\"u}chtigung des Blitzschutzsystems f{\"u}r ein B{\"u}rogeb{\"a}ude auf der Basis von VDE V 0185 Teil 100 (ENV 61024-1) und VDE 0185 Teil 103 (IEC 1312-1)},
  year      = {1998},
  language  = {de}
}
@article{MottaghyPechnigTaugsetal.2010,
  author    = {Mottaghy, Darius and Pechnig, Renate and Taugs, Renate and Kr{\"o}ger, Jens and Thomsen, Claudia and Hesse, Fabian and Liebsch-Doerschner, Thomas},
  title     = {Erstellung eines geothermischen Modells f{\"u}r Teile Hamburgs und anliegende Gebiete},
  series = {BBR - Fachmagazin f{\"u}r Brunnen- und Leitungsbau},
  volume    = {61},
  journal   = {BBR - Fachmagazin f{\"u}r Brunnen- und Leitungsbau},
  number    = {12},
  publisher = {WVGW Wirtschafts- u. Verl.Ges. Gas und Wasser},
  address   = {Bonn},
  issn      = {1611-1478},
  pages     = {52 -- 59},
  year      = {2010},
  language  = {de}
}