@inproceedings{SrivastavaSinghDhandetal.2006, author = {Srivastava, Alok and Singh, Virendra and Dhand, Chetna and Kaur, Manindar and Singh, Tejvir and Witte, Katrin and Scherer, Ulrich W.}, title = {Study of swift heavy ion modified conduction polymer composites for application as gas sensor}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:a96-opus-1345}, year = {2006}, abstract = {A polyaniline-based conducting composite was prepared by oxidative polymerisation of aniline in a polyvinylchloride (PVC) matrix. The coherent free standing thin films of the composite were prepared by a solution casting method. The polyvinyl chloride-polyaniline composites exposed to 120 MeV ions of silicon with total ion fluence ranging from 1011 to 1013 ions/cm2, were observed to be more sensitive towards ammonia gas than the unirradiated composite. The response time of the irradiated composites was observed to be comparably shorter. We report for the first time the application of swift heavy ion modified insulating polymer conducting polymer (IPCP) composites for sensing of ammonia gas.}, subject = {Biosensor}, language = {en} } @misc{Staat2006, author = {Staat, Manfred}, title = {Technische Mechanik. Vorlesungsmitschrift. Korrigierter Nachdr. der 3. Aufl.}, year = {2006}, abstract = {{\"U}berarbeitete, korrigierte und erg{\"a}nzte Version einer Vorlesungsmitschrift von Sebastian Kr{\"a}mer. 172 S. Inhaltsverzeichnis 0 Einf{\"u}hrung in die Mechanik 1 Statik starrer K{\"o}rper 2 Elastostatik (Festigkeitslehre) 3 Kinematik 4 Kinetik Literatur}, subject = {Technische Mechanik}, language = {de} } @misc{Staat2006, author = {Staat, Manfred}, title = {Engineering Mechanics. Lecture Notes. 2nd edition, translation of the 3rd corrected and extended German edition of "Technische Mechanik"}, year = {2006}, abstract = {English translation of the corrected lectures notes of Sebastian Kr{\"a}mer. Contents 0 Introduction to Mechanics 1 Statics of Rigid Bodies 2 Elastostatics (Strength of Materials) 3 Kinematics 4 Kinetics Literature}, subject = {Technische Mechanik}, language = {en} } @inproceedings{Staat2006, author = {Staat, Manfred}, title = {Problems and chances for probabilistic fracture mechanics in the analysis of steel pressure boundary reliability. - {\"U}berarb. Ausg.}, year = {2006}, abstract = {In: Technical feasibility and reliability of passive safety systems for nuclear power plants. Proceedings of an Advisory Group Meeting held in J{\"u}lich, 21-24 November 1994. - Vienna , 1996. - Seite: 43 - 55 IAEA-TECDOC-920 Abstract: It is shown that the difficulty for probabilistic fracture mechanics (PFM) is the general problem of the high reliability of a small population. There is no way around the problem as yet. Therefore what PFM can contribute to the reliability of steel pressure boundaries is demon­strated with the example of a typical reactor pressure vessel and critically discussed. Although no method is distinguishable that could give exact failure probabilities, PFM has several addi­tional chances. Upper limits for failure probability may be obtained together with trends for design and operating conditions. Further, PFM can identify the most sensitive parameters, improved control of which would increase reliability. Thus PFM should play a vital role in the analysis of steel pressure boundaries despite all shortcomings.}, subject = {Bruchmechanik}, language = {en} } @misc{StaatBarry2006, author = {Staat, Manfred and Barry, Steve}, title = {Continuum Mechanics with an Introduction to the Finite Element Method / Steve Barry; Manfred Staat. With extensions by Manfred Staat.}, year = {2006}, abstract = {Contents: 1 Introduction 2 One Dimensional Continuum Mechanics 3 Tensors 4 Three Dimensional Stress and Strain 5 Conservation Laws 6 Contiunuum Modelling 7 Plain Problems 8 Questions 9 Reference Information}, subject = {Technische Mechanik}, language = {en} } @inproceedings{TymeckiGlabKoncki2006, author = {Tymecki, Lukasz and Glab, Stanislaw and Koncki, Robert}, title = {Miniaturized, planar ion-selective electrodes fabricated by means of thick-film technology}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:a96-opus-1506}, year = {2006}, abstract = {Various planar technologies are employed for developing solid-state sensors having low cost, small size and high reproducibility; thin- and thick-film technologies are most suitable for such productions. Screen-printing is especially suitable due to its simplicity, low-cost, high reproducibility and efficiency in large-scale production. This technology enables the deposition of a thick layer and allows precise pattern control. Moreover, this is a highly economic technology, saving large amounts of the used inks. In the course of repetitions of the film-deposition procedure there is no waste of material due to additivity of this thick-film technology. Finally, the thick films can be easily and quickly deposited on inexpensive substrates. In this contribution, thick-film ion-selective electrodes based on ionophores as well as crystalline ion-selective materials dedicated for potentiometric measurements are demonstrated. Analytical parameters of these sensors are comparable with those reported for conventional potentiometric electrodes. All mentioned thick-film strip electrodes have been totally fabricated in only one, fully automated thickfilm technology, without any additional manual, chemical or electrochemical steps. In all cases simple, inexpensive, commercially available materials, i.e. flexible, plastic substrates and easily cured polymer-based pastes were used.}, subject = {Biosensor}, language = {en} } @inproceedings{Tuerk2006, author = {T{\"u}rk, Roman}, title = {Sanierung von Hausanschl{\"u}ssen}, year = {2006}, abstract = {In: Alfha.net / Sektion Bauingenieurwesen: 1. [Erster] Erfahrungsaustausch : Absolventen des Fachbereichs Bauingenieurwesens berichten. 13. Oktober 2006. S. 23-24. Zusammenfassung des Vortrags.}, subject = {Hausanschluss}, language = {de} } @inproceedings{WagnerKohlFroebaetal.2006, author = {Wagner, Thorsten and Kohl, Claus-Dieter and Fr{\"o}ba, Michael and Tiemann, Michael}, title = {Gas sensing properties of ordered mesoporous SnO2}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:a96-opus-1422}, year = {2006}, abstract = {We report on the synthesis and CO gas-sensing properties of mesoporous tin(IV) oxides (SnO2). For the synthesis cetyltrimethylammonium bromide (CTABr) was used as a structure-directing agent; the resulting SnO2 powders were applied as films to commercially available sensor substrates by drop coating. Nitrogen physisorption shows specific surface areas up to 160 m2·g-1 and mean pore diameters of about 4 nm, as verified by TEM. The film conductance was measured in dependence on the CO concentration in humid synthetic air at a constant temperature of 300 °C. The sensors show a high sensitivity at low CO concentrations and turn out to be largely insensitive towards changes in the relative humidity. We compare the materials with commercially available SnO2-based sensors.}, subject = {Biosensor}, language = {en} } @inproceedings{WagnerSchoening2006, author = {Wagner, Torsten and Sch{\"o}ning, Michael Josef}, title = {Preface of the Special Issue of I3S 2005 in J{\"u}lich (Germany)}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:a96-opus-1365}, year = {2006}, abstract = {International Symposium on Sensor Science, I3S 2005 <3; 2005; Juelich, Germany> In: Sensors 2006, 6, 260-261 ISSN 1424-8220}, subject = {Biosensor}, language = {en} } @inproceedings{Wellmann2006, author = {Wellmann, Judith}, title = {Perspektiven eines Bauingenieurs im konstruktiven Ingenieurbau}, year = {2006}, abstract = {In: Alfha.net / Sektion Bauingenieurwesen: 1. [Erster] Erfahrungsaustausch : Absolventen des Fachbereichs Bauingenieurwesens berichten. 13. Oktober 2006. S. 7-12 Die Berufsperspektiven im konstruktiven Ingenieurbau werden trotz sinkendem Bedarf an Statikern positiv bewertet.}, subject = {Ingenieurbau}, language = {de} } @inproceedings{Wessling2006, author = {Weßling, Matthias}, title = {Como motivar a si mesmo e aos outros - o valor dos 16 Motivos Vitais para Lideran{\c{c}}a}, year = {2006}, abstract = {O Perfil Reiss apresenta no resultado uma vis{\~a}o da estrutura dos motivos e impulsos de uma pessoa. O ponto de sa{\´i}da para a an{\´a}lise do resultado {\´e} o conhecimento de que os motivos vitais (= valores e metas de sobreviv{\^e}ncia) formam a moldura, na qual as compet{\^e}ncias e capacidades que uma pessoa possui possam se desabrochar de forma ideal. A partir desse princ{\´i}pio, n{\~a}o existe no Perfil Reiss nenhum resultado que se possa classificar como correto ou falso, nem como bom ou mau. Uma compara{\c{c}}{\~a}o entre o resultado do Perfil Reiss e o conte{\´u}do de uma atividade apresentada ou ambicionada d{\´a} informa{\c{c}}{\~a}o sobre at{\´e} que ponto a capacidade de rendimento de uma pessoa nessa posi{\c{c}}{\~a}o pode vir ou vir{\´a} a se desenvolver por um longo tempo.}, subject = {F{\"u}hrung}, language = {es} } @techreport{Wessling2006, type = {Working Paper}, author = {Weßling, Matthias}, title = {O Perfil Reiss: Conceito scientifico e conclus{\~o}es da pesquisa, aplica{\c{c}}{\~o}es exemplaricas e conseq{\"u}{\^e}ncias pr{\´a}ticas}, year = {2006}, abstract = {Para Reiss, a avalia{\c{c}}{\~a}o de cada um dos 16 motivos vitais {\´e} a chave para n{\~a}o s{\´o} entender o comportamento humano, como tamb{\´e}m para poder prev{\^e}-lo. Tal previs{\~a}o {\´e} tamb{\´e}m a meta de cada ci{\^e}ncia. Quando se quer saber a rea{\c{c}}{\~a}o das pessoas, precisa-se primeiro descobrir, o que as pessoas realmente querem - e, ent{\~a}o prever, que elas satisfar{\~a}o esses desejos e necessidades em suas a{\c{c}}{\~o}es. As chances, que o Perfil Reiss oferece, resultam entre outras tamb{\´e}m, que aqui {\´e} poss{\´i}vel pela primeira vez uma individualiza{\c{c}}{\~a}o total. Cerca de 6 bilh{\~o}es de perfis individuais podem ser apresentados com o Perfil Reiss. Na combina{\c{c}}{\~a}o correta da forma{\c{c}}{\~a}o e utiliza{\c{c}}{\~a}o da tipologia de um lado e da individualidade da conclus{\~a}o de outro lado, est{\´a} a for{\c{c}}a positiva desse instrumento.}, subject = {Motivation}, language = {pt} } @inproceedings{OPUS4-161, title = {Alfha.net / Sektion Bauingenieurwesen: 1. [Erster] Erfahrungsaustausch : Absolventen des Fachbereichs Bauingenieurwesens berichten. 13. Oktober 2006}, organization = {Alfha.net / Sektion Bauingenieurwesen}, year = {2006}, abstract = {"Mit dem "1. Erfahrungsaustausch" im Fachbereich Bauingenieurwesen berichten Absolventen des Fachbereichs aus der Praxis. Mit diesem Treffen wird die wichtige Verbindung zwischen Hochschule, ihren Absolventen und der Berufspraxis zum besonderen Anliegen gemacht und besonders gest{\"a}rkt." Zitat Prof. Dr.- Ing. Hans Boegershausen, Dekan im Grußwort. Referenten und Themen: Wellmann, Judith: Perspektiven eines Bauingenieurs im konstruktiven Ingenieurbau Dirk Gobbele, Dirk: Planung der Umbaumaßnahme Hauptbahnhof Aachen Kretschmann, Lars: Planung und Bauleitung Buschtunnel Aachen Becker, Astrid: Anlagenmanagement und Aufgaben der DB Netz AG, Bauherrenvertretung und Wirtschaftlichkeit Plenz, Michael: Baurevision und Unternehmensberatung, T{\"a}tigkeit als {\"o}ffentlich bestellter und vereidigter Sachverst{\"a}ndiger Kl{\"o}cker, Alexander: Das Leitungsbauunternehmen - Unternehmerische Strategie als Zukunftssicherung T{\"u}rk, Roman: Sanierung von Hausanschl{\"u}ssen Bornebusch, Michael: Hydraulische und Hydrologische Modellsimulationen als Planungswerkzeug f{\"u}r Hochwasser-Schutz-Maßnahmen Himmerich, J{\"o}rg : Pipeline Integrity Management System - Probabilistische Bewertung von Bauwerken am Beispiel von Hochdruckleitungen.}, subject = {Aachen / Fachhochschule Aachen / Fachbereich Bauingenieurwesen}, language = {de} } @misc{OPUS4-142, title = {Fachblatt, Jahrgang 2006; Nr. 1}, organization = {FH Aachen, University of Applied Sciences}, year = {2006}, abstract = {Studienbeitr{\"a}ge Die schwere Geburt des Studienbeitragsgesetzes Forschung Erfindungen f{\"u}r die Praxis Antikensammlung inszeniert in geschwungener Ebenenkonstruktion Doppelt h{\"a}lt besser Studium und Lehre Kreative H{\"o}henfl{\"u}ge im Weinberg von Piemont Nach "Bauhaus Europa" jetzt "Kunsthaus Aachen" Beton - Es kommt drauf an, was man draus macht "Ein St{\"u}ck Raumfahrtsystem" Film ab im Cinekaree Umstellung auf Bachelor- und Master-Abschl{\"u}sse beispielhaft Herausragende architektonische Umsetzung geehrt Erdbeobachtung im Taschenformat Die Hygiene im Handgep{\"a}ck Eintauchen in die Welt von "sub-ten" Symposium zur 1. Flugmesswoche des FB 6 Personen Konsul mit Zeitungsente Der richtige Mann am richtigen Ort Urlaub f{\"u}rs Ehrenamt 101 und ziemlich weise Goldene Auszeichnung f{\"u}r die Dekanin Wir feiern heute unsere Eliten Eigene Faszination f{\"u}r den Lehrstoff fesselt Studierende Personalia Horst Rambau: Endstation Selbstst{\"a}ndigkeit? Der gute Ruf reicht bis Teheran Alumni "Regen ist gut f{\"u}r unser Gesch{\"a}ft" FH-Studenten aus J{\"u}lich in der Wissenschaft erfolgreich Miss und Mister FH 2005 International Vor 20 Jahren begann es! "Heute ist ein guter Tag f{\"u}r die Fachhochschule" Service Bologna ist l{\"a}ngst bei den Hochschulen angekommen Auch Lehrer lernen nie aus Was ist eigentlich das Freshman-Year "Zeile f{\"u}r Zeile"}, subject = {Aachen / Fachhochschule Aachen}, language = {de} }