@inproceedings{ChajanSchulteTiggesRekeetal.2021,
  author    = {Chajan, Eduard and Schulte-Tigges, Joschua and Reke, Michael and Ferrein, Alexander and Matheis, Dominik and Walter, Thomas},
  title     = {GPU based model-predictive path control for self-driving vehicles},
  series = {IEEE Intelligent Vehicles Symposium (IV)},
  booktitle = {IEEE Intelligent Vehicles Symposium (IV)},
  publisher = {IEEE},
  isbn      = {978-1-7281-5394-0},
  doi       = {10.1109/IV48863.2021.9575619},
  pages     = {1243 -- 1248},
  year      = {2021},
  abstract  = {One central challenge for self-driving cars is a proper path-planning. Once a trajectory has been found, the next challenge is to accurately and safely follow the precalculated path. The model-predictive controller (MPC) is a common approach for the lateral control of autonomous vehicles. The MPC uses a vehicle dynamics model to predict the future states of the vehicle for a given prediction horizon. However, in order to achieve real-time path control, the computational load is usually large, which leads to short prediction horizons. To deal with the computational load, the control algorithm can be parallelized on the graphics processing unit (GPU). In contrast to the widely used stochastic methods, in this paper we propose a deterministic approach based on grid search. Our approach focuses on systematically discovering the search area with different levels of granularity. To achieve this, we split the optimization algorithm into multiple iterations. The best sequence of each iteration is then used as an initial solution to the next iteration. The granularity increases, resulting in smooth and predictable steering angle sequences. We present a novel GPU-based algorithm and show its accuracy and realtime abilities with a number of real-world experiments.},
  language  = {en}
}
@inproceedings{HueningWacheMagiera2021,
  author    = {H{\"u}ning, Felix and Wache, Franz-Josef and Magiera, David},
  title     = {Redundant bus systems using dual-mode radio},
  series = {Proceedings of Sixth International Congress on Information and Communication Technology},
  booktitle = {Proceedings of Sixth International Congress on Information and Communication Technology},
  publisher = {Springer},
  address   = {Singapore},
  isbn      = {978-981-16-2379-0},
  doi       = {10.1007/978-981-16-2380-6_73},
  pages     = {835 -- 842},
  year      = {2021},
  abstract  = {Communication via serial bus systems, like CAN, plays an important role for all kinds of embedded electronic and mechatronic systems. To cope up with the requirements for functional safety of safety-critical applications, there is a need to enhance the safety features of the communication systems. One measure to achieve a more robust communication is to add redundant data transmission path to the applications. In general, the communication of real-time embedded systems like automotive applications is tethered, and the redundant data transmission lines are also tethered, increasing the size of the wiring harness and the weight of the system. A radio link is preferred as a redundant transmission line as it uses a complementary transmission medium compared to the wired solution and in addition reduces wiring harness size and weight. Standard wireless links like Wi-Fi or Bluetooth cannot meet the requirements for real-time capability with regard to bus communication. Using the new dual-mode radio enables a redundant transmission line meeting all requirements with regard to real-time capability, robustness and transparency for the data bus. In addition, it provides a complementary transmission medium with regard to commonly used tethered links. A CAN bus system is used to demonstrate the redundant data transfer via tethered and wireless CAN.},
  language  = {en}
}
@inproceedings{HueningStuettgen2021,
  author    = {H{\"u}ning, Felix and St{\"u}ttgen, Marcel},
  title     = {Work in Progress: Interdisciplinary projects in times of COVID-19 crisis - challenges, risks and chances},
  series = {2021 IEEE Global Engineering Education Conference (EDUCON)},
  booktitle = {2021 IEEE Global Engineering Education Conference (EDUCON)},
  doi       = {10.1109/EDUCON46332.2021.9454006},
  pages     = {1175 -- 1179},
  year      = {2021},
  language  = {en}
}
@inproceedings{HoegenDonckerBragardetal.2021,
  author    = {Hoegen, Anne von and Doncker, Rik W. De and Bragard, Michael and Hoegen, Svenja von},
  title     = {Problem-Based Learning in Automation Engineering: Performing a Remote Laboratory Session Serving Various Educational Attainments},
  series = {2021 IEEE Global Engineering Education Conference (EDUCON)},
  booktitle = {2021 IEEE Global Engineering Education Conference (EDUCON)},
  doi       = {10.1109/EDUCON46332.2021.9453925},
  pages     = {1605 -- 1614},
  year      = {2021},
  language  = {en}
}
@inproceedings{FerreinMeessenLimpertetal.2021,
  author    = {Ferrein, Alexander and Meeßen, Marcus and Limpert, Nicolas and Schiffer, Stefan},
  title     = {Compiling ROS Schooling Curricula via Contentual Taxonomies},
  series = {Robotics in Education},
  booktitle = {Robotics in Education},
  editor    = {Lepuschitz, Wilfried},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-67411-3},
  doi       = {10.1007/978-3-030-67411-3_5},
  pages     = {49 -- 60},
  year      = {2021},
  language  = {en}
}
@inproceedings{HeuermannHarzheimMuehmel2021,
  author    = {Heuermann, Holger and Harzheim, Thomas and M{\"u}hmel, Marc},
  title     = {A maritime harmonic radar search and rescue system using passive and active tags},
  series = {2020 17th European Radar Conference (EuRAD)},
  booktitle = {2020 17th European Radar Conference (EuRAD)},
  publisher = {IEEE},
  isbn      = {978-2-87487-061-3},
  doi       = {10.1109/EuRAD48048.2021.00030},
  pages     = {73 -- 76},
  year      = {2021},
  language  = {en}
}
@inproceedings{HoegenDonckerRuetters2020,
  author    = {Hoegen, Anne von and Doncker, Rik W. De and R{\"u}tters, Ren{\´e}},
  title     = {Teaching Digital Control of Operational Amplifier Processes with a LabVIEW Interface and Embedded Hardware},
  series = {The 23rd International Conference on Electrical Machines and Systems (ICEMS), Hamamatsu, Japan},
  booktitle = {The 23rd International Conference on Electrical Machines and Systems (ICEMS), Hamamatsu, Japan},
  doi       = {10.23919/ICEMS50442.2020.9290928},
  pages     = {1117 -- 1122},
  year      = {2020},
  language  = {en}
}
@inproceedings{HofmannLimpertMatareetal.2019,
  author    = {Hofmann, Till and Limpert, Nicolas and Matar{\´e}, Viktor and Ferrein, Alexander and Lakemeyer, Gerhard},
  title     = {Winning the RoboCup Logistics League with Fast Navigation, Precise Manipulation, and Robust Goal Reasoning},
  series = {RoboCup 2019: Robot World Cup XXIII. RoboCup},
  booktitle = {RoboCup 2019: Robot World Cup XXIII. RoboCup},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-35699-6},
  doi       = {10.1007/978-3-030-35699-6_41},
  pages     = {504 -- 516},
  year      = {2019},
  language  = {en}
}
@inproceedings{EltesterFerreinSchiffer2020,
  author    = {Eltester, Niklas Sebastian and Ferrein, Alexander and Schiffer, Stefan},
  title     = {A smart factory setup based on the RoboCup logistics league},
  series = {2020 IEEE Conference on Industrial Cyberphysical Systems (ICPS)},
  booktitle = {2020 IEEE Conference on Industrial Cyberphysical Systems (ICPS)},
  publisher = {IEEE},
  doi       = {10.1109/ICPS48405.2020.9274766},
  pages     = {297 -- 302},
  year      = {2020},
  abstract  = {In this paper we present SMART-FACTORY, a setup for a research and teaching facility in industrial robotics that is based on the RoboCup Logistics League. It is driven by the need for developing and applying solutions for digital production. Digitization receives constantly increasing attention in many areas, especially in industry. The common theme is to make things smart by using intelligent computer technology. Especially in the last decade there have been many attempts to improve existing processes in factories, for example, in production logistics, also with deploying cyber-physical systems. An initiative that explores challenges and opportunities for robots in such a setting is the RoboCup Logistics League. Since its foundation in 2012 it is an international effort for research and education in an intra-warehouse logistics scenario. During seven years of competition a lot of knowledge and experience regarding autonomous robots was gained. This knowledge and experience shall provide the basis for further research in challenges of future production. The focus of our SMART-FACTORY is to create a stimulating environment for research on logistics robotics, for teaching activities in computer science and electrical engineering programmes as well as for industrial users to study and explore the feasibility of future technologies. Building on a very successful history in the RoboCup Logistics League we aim to provide stakeholders with a dedicated facility oriented at their individual needs.},
  language  = {en}
}
@inproceedings{KirschMatareFerreinetal.2020,
  author    = {Kirsch, Maximilian and Matar{\´e}, Victor and Ferrein, Alexander and Schiffer, Stefan},
  title     = {Integrating golog++ and ROS for Practical and Portable High-level Control},
  series = {12th International Conference on Agents and Artificial Intelligence},
  booktitle = {12th International Conference on Agents and Artificial Intelligence},
  doi       = {10.5220/0008984406920699},
  year      = {2020},
  language  = {en}
}
@inproceedings{ElgamalHeuermann2020,
  author    = {Elgamal, Abdelrahman and Heuermann, Holger},
  title     = {Design and Development of a Hot S-Parameter Measurement System for Plasma and Magnetron Applications},
  series = {2020 German Microwave Conference (GeMiC), Cottbus, Germany, 2020},
  booktitle = {2020 German Microwave Conference (GeMiC), Cottbus, Germany, 2020},
  isbn      = {978-3-9820397-1-8},
  pages     = {124 -- 127},
  year      = {2020},
  language  = {en}
}
@inproceedings{FingerKhalsaKreyeretal.2019,
  author    = {Finger, Felix and Khalsa, R. and Kreyer, J{\"o}rg and Mayntz, Joscha and Braun, Carsten and Dahmann, Peter and Esch, Thomas and Kemper, Hans and Schmitz, O. and Bragard, Michael},
  title     = {An approach to propulsion system modelling for the conceptual design of hybrid-electric general aviation aircraft},
  series = {Deutscher Luft- und Raumfahrtkongress 2019, 30.9.-2.10.2019, Darmstadt},
  booktitle = {Deutscher Luft- und Raumfahrtkongress 2019, 30.9.-2.10.2019, Darmstadt},
  pages     = {15 Seiten},
  year      = {2019},
  abstract  = {In this paper, an approach to propulsion system modelling for hybrid-electric general aviation aircraft is presented. Because the focus is on general aviation aircraft, only combinations of electric motors and reciprocating combustion engines are explored. Gas turbine hybrids will not be considered. The level of the component's models is appropriate for the conceptual design stage. They are simple and adaptable, so that a wide range of designs with morphologically different propulsive system architectures can be quickly compared. Modelling strategies for both mass and efficiency of each part of the propulsion system (engine, motor, battery and propeller) will be presented.},
  language  = {en}
}
@inproceedings{RekePeterSchulteTiggesetal.2020,
  author    = {Reke, Michael and Peter, Daniel and Schulte-Tigges, Joschua and Schiffer, Stefan and Ferrein, Alexander and Walter, Thomas and Matheis, Dominik},
  title     = {A Self-Driving Car Architecture in ROS2},
  series = {2020 International SAUPEC/RobMech/PRASA Conference, Cape Town, South Africa},
  booktitle = {2020 International SAUPEC/RobMech/PRASA Conference, Cape Town, South Africa},
  isbn      = {978-1-7281-4162-6},
  doi       = {10.1109/SAUPEC/RobMech/PRASA48453.2020.9041020},
  pages     = {1 -- 6},
  year      = {2020},
  language  = {en}
}
@inproceedings{DinghoferHartung2020,
  author    = {Dinghofer, Kai and Hartung, Frank},
  title     = {Analysis of Criteria for the Selection of Machine Learning Frameworks},
  series = {2020 International Conference on Computing, Networking and Communications (ICNC)},
  booktitle = {2020 International Conference on Computing, Networking and Communications (ICNC)},
  doi       = {10.1109/ICNC47757.2020.9049650},
  pages     = {373 -- 377},
  year      = {2020},
  language  = {en}
}
@inproceedings{AlhwarinSchifferFerreinetal.2019,
  author    = {Alhwarin, Faraj and Schiffer, Stefan and Ferrein, Alexander and Scholl, Ingrid},
  title     = {An Optimized Method for 3D Body Scanning Applications Based on KinectFusion},
  series = {Communications in Computer and Information Science},
  volume    = {1024},
  booktitle = {Communications in Computer and Information Science},
  publisher = {Springer},
  issn      = {1865-0929},
  doi       = {10.1007/978-3-030-29196-9_6},
  pages     = {100 -- 113},
  year      = {2019},
  language  = {en}
}
@inproceedings{CordesGligorevicBlicharski2019,
  author    = {Cordes, Sven and Gligorevic, Snjezana and Blicharski, Peter},
  title     = {Analysis of sine precision influence on DOA estimation using the MUSIC algorithm},
  series = {2019 20th International Radar Symposium (IRS)},
  booktitle = {2019 20th International Radar Symposium (IRS)},
  isbn      = {978-3-7369-9860-5},
  doi       = {10.23919/IRS.2019.8768162},
  pages     = {1 -- 10},
  year      = {2019},
  language  = {en}
}
@inproceedings{SadeghfamSadeghiAhangarElgamaletal.2019,
  author    = {Sadeghfam, Arash and Sadeghi-Ahangar, A. and Elgamal, Abdelrahman and Heuermann, Holger},
  title     = {Design and Development of a Novel Self-Igniting Microwave Plasma Jet for Industrial Applications},
  series = {IEEE MTT-S International Microwave Symposium Digest},
  booktitle = {IEEE MTT-S International Microwave Symposium Digest},
  isbn      = {978-172811309-8},
  pages     = {63 -- 66},
  year      = {2019},
  language  = {en}
}
@inproceedings{GaldiHartungDugelay2019,
  author    = {Galdi, Chiara and Hartung, Frank and Dugelay, Jean-Luc},
  title     = {Socrates: A database of realistic data for source camera recognition on smartphones},
  series = {Proceedings of the 8th International Conference on Pattern Recognition Applications and Methods - Volume 1: ICPRAM},
  booktitle = {Proceedings of the 8th International Conference on Pattern Recognition Applications and Methods - Volume 1: ICPRAM},
  isbn      = {978-989-758-351-3},
  doi       = {10.5220/0007403706480655},
  pages     = {648 -- 655},
  year      = {2019},
  language  = {en}
}
@inproceedings{WeberWolf2017,
  author    = {Weber, Niklas and Wolf, Martin},
  title     = {Datenerhebung f{\"u}r die CDG-Forschung},
  series = {Prozesse, Technologie, Anwendungen, Systeme und Management 2017 : angewandte Forschung in der Wirtschaftsinformatik : Tagungsband zur 30. AKWI-Jahrestagung vom 17.09.2017 bis 20.09.2017 an der Hochschule Aschaffenburg / Arbeitskreis Wirtschaftsinformatik an Fachhochschulen (AKWI)},
  booktitle = {Prozesse, Technologie, Anwendungen, Systeme und Management 2017 : angewandte Forschung in der Wirtschaftsinformatik : Tagungsband zur 30. AKWI-Jahrestagung vom 17.09.2017 bis 20.09.2017 an der Hochschule Aschaffenburg / Arbeitskreis Wirtschaftsinformatik an Fachhochschulen (AKWI)},
  editor    = {Barton, Thomas},
  publisher = {mana-Buch},
  address   = {Heide},
  isbn      = {978-3-944330-56-3},
  pages     = {218 -- 227},
  year      = {2017},
  language  = {de}
}
@inproceedings{BragardSubeSchneideretal.2019,
  author    = {Bragard, Michael and Sube, Maike and Schneider, Maike and Jungemann, Christoph},
  title     = {Introducing a Cross-University Bachelor's Programme with Orientation Semester - Enabling a Permeable Academic Education System},
  series = {2019 20th International Conference on Research and Education in Mechatronics (REM)},
  booktitle = {2019 20th International Conference on Research and Education in Mechatronics (REM)},
  isbn      = {978-1-5386-9257-8},
  doi       = {10.1109/REM.2019.8744132},
  pages     = {1 -- 6},
  year      = {2019},
  language  = {en}
}
@inproceedings{SchifferBragard2019,
  author    = {Schiffer, Fabian and Bragard, Michael},
  title     = {Cascaded LQ and Field-Oriented Control of a Mobile Inverse Pendulum (Segway) with Permanent Magnet Synchronous Machines},
  series = {2019 20th International Conference on Research and Education in Mechatronics (REM)},
  booktitle = {2019 20th International Conference on Research and Education in Mechatronics (REM)},
  isbn      = {978-1-5386-9257-8},
  doi       = {10.1109/REM.2019.8744101},
  pages     = {1 -- 8},
  year      = {2019},
  language  = {en}
}
@inproceedings{SteinbauerFerrein2019,
  author    = {Steinbauer, Gerald and Ferrein, Alexander},
  title     = {CogRob 2018 : Cognitive Robotics Workshop. Proceedings of the 11th Cognitive Robotics Workshop 2018 co-located with 16th International Conference on Principles of Knowledge Representation and Reasoning (KR 2018). Tempe, AZ, USA, October 27th, 2018.},
  series = {CEUR workshop proceedings},
  booktitle = {CEUR workshop proceedings},
  number    = {Vol-2325},
  issn      = {1613-0073},
  pages     = {46 Seiten},
  year      = {2019},
  language  = {en}
}
@inproceedings{DonnerRabelScholletal.2019,
  author    = {Donner, Ralf and Rabel, Matthias and Scholl, Ingrid and Ferrein, Alexander and Donner, Marc and Geier, Andreas and John, Andr{\´e} and K{\"o}hler, Christian and Varga, Sebastian},
  title     = {Die Extraktion bergbaulich relevanter Merkmale aus 3D-Punktwolken eines untertagetauglichen mobilen Multisensorsystems},
  series = {Tagungsband Geomonitoring},
  booktitle = {Tagungsband Geomonitoring},
  doi       = {10.15488/4515},
  pages     = {91 -- 110},
  year      = {2019},
  language  = {de}
}
@inproceedings{FerreinBharatheeshaSchifferetal.2019,
  author    = {Ferrein, Alexander and Bharatheesha, Mukunda and Schiffer, Stefan and Corbato, Carlos Hernandez},
  title     = {TRROS 2018 : Teaching Robotics with ROS Workshop at ERF 2018; Proceedings of the Workshop on Teaching Robotics with ROS (held at ERF 2018), co-located with European Robotics Forum 2018 (ERF 2018), Tampere, Finland, March 15th, 2018},
  series = {CEUR Workshop Proceedings},
  booktitle = {CEUR Workshop Proceedings},
  number    = {Vol-2329},
  issn      = {1613-0073},
  pages     = {68 Seiten},
  year      = {2019},
  language  = {en}
}
@inproceedings{FerreinSchollNeumannetal.2019,
  author    = {Ferrein, Alexander and Scholl, Ingrid and Neumann, Tobias and Kr{\"u}ckel, Kai and Schiffer, Stefan},
  title     = {A system for continuous underground site mapping and exploration},
  doi       = {10.5772/intechopen.85859},
  pages     = {16 Seiten},
  year      = {2019},
  language  = {en}
}
@inproceedings{MatareSchifferFerrein2019,
  author    = {Matar{\´e}, Victor and Schiffer, Stefan and Ferrein, Alexander},
  title     = {golog++ : An integrative system design},
  series = {CogRob 2018. Cognitive Robotics Workshop : Proceedings of the 11th Cognitive Robotics Workshop 2018 co-located with 16th International Conference on Principles of Knowledge Representation and Reasoning (KR 2018) Tempe, AZ, USA, October 27th, 2018},
  booktitle = {CogRob 2018. Cognitive Robotics Workshop : Proceedings of the 11th Cognitive Robotics Workshop 2018 co-located with 16th International Conference on Principles of Knowledge Representation and Reasoning (KR 2018) Tempe, AZ, USA, October 27th, 2018},
  editor    = {Steinbauer, Gerald and Ferrein, Alexander},
  issn      = {1613-0073},
  pages     = {29 -- 35},
  year      = {2019},
  language  = {en}
}
@inproceedings{RuettersWeinheimerBragard2018,
  author    = {R{\"u}tters, Ren{\´e} and Weinheimer, Marius and Bragard, Michael},
  title     = {Teaching Control Theory with a Simplified Helicopter Model and a Classroom Fitting Hardware Test-Bench},
  series = {2018 IEEE 59th International Scientific Conference on Power and Electrical Engineering of Riga Technical University (RTUCON)},
  booktitle = {2018 IEEE 59th International Scientific Conference on Power and Electrical Engineering of Riga Technical University (RTUCON)},
  isbn      = {978-1-5386-6903-7},
  doi       = {10.1109/RTUCON.2018.8659871},
  year      = {2018},
  language  = {en}
}
@inproceedings{BragardHoekHoegenetal.2018,
  author    = {Bragard, Michael and Hoek, Hauke van and Hoegen, Anne von and Doncker, Rik W. De},
  title     = {Motivation-based Learning: Teaching Fundamentals of Electrical Engineering with an LED Spinning Top},
  series = {2018 IEEE 59th International Scientific Conference on Power and Electrical Engineering of Riga Technical University (RTUCON)},
  booktitle = {2018 IEEE 59th International Scientific Conference on Power and Electrical Engineering of Riga Technical University (RTUCON)},
  isbn      = {978-1-5386-6903-7},
  doi       = {10.1109/RTUCON.2018.8659810},
  pages     = {1 -- 6},
  year      = {2018},
  language  = {en}
}
@inproceedings{BindzusBragard2018,
  author    = {Bindzus, Manuel and Bragard, Michael},
  title     = {Motivating Intuitive Understanding of the Switched Reluctance Machine in the Education of Undergraduate Students},
  series = {2018 IEEE 59th International Scientific Conference on Power and Electrical Engineering of Riga Technical University (RTUCON)},
  booktitle = {2018 IEEE 59th International Scientific Conference on Power and Electrical Engineering of Riga Technical University (RTUCON)},
  isbn      = {978-1-5386-6903-7},
  doi       = {10.1109/RTUCON.2018.8659870},
  pages     = {1 -- 6},
  year      = {2018},
  language  = {en}
}
@inproceedings{SchollBartellaMoluluoetal.2019,
  author    = {Scholl, Ingrid and Bartella, Alex and Moluluo, Cem and Ertural, Berat and Laing, Frederic and Suder, Sebastian},
  title     = {MedicVR : Acceleration and Enhancement Techniques for Direct Volume Rendering in Virtual Reality},
  series = {Bildverarbeitung f{\"u}r die Medizin 2019 : Algorithmen - Systeme - Anwendungen},
  booktitle = {Bildverarbeitung f{\"u}r die Medizin 2019 : Algorithmen - Systeme - Anwendungen},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-25326-4},
  doi       = {10.1007/978-3-658-25326-4_32},
  pages     = {152 -- 157},
  year      = {2019},
  language  = {en}
}
@inproceedings{AlhwarinFerreinScholl2019,
  author    = {Alhwarin, Faraj and Ferrein, Alexander and Scholl, Ingrid},
  title     = {An Efficient Hashing Algorithm for NN Problem in HD Spaces},
  series = {Lecture Notes in Computer Science},
  booktitle = {Lecture Notes in Computer Science},
  isbn      = {978-303005498-4},
  doi       = {10.1007/978-3-030-05499-1_6},
  pages     = {101 -- 115},
  year      = {2019},
  language  = {en}
}
@inproceedings{SerrorHenzeHacketal.2018,
  author    = {Serror, Martin and Henze, Martin and Hack, Sacha and Schuba, Marko and Wehrle, Klaus},
  title     = {Towards in-network security for smart homes},
  series = {13th International Conference on Availability, Reliability and Security, ARES 2018; Hamburg; Germany; 27 August 2018 through 30 August 2018},
  booktitle = {13th International Conference on Availability, Reliability and Security, ARES 2018; Hamburg; Germany; 27 August 2018 through 30 August 2018},
  isbn      = {978-145036448-5},
  doi       = {10.1145/3230833.3232802},
  pages     = {Article numer 3232802},
  year      = {2018},
  language  = {en}
}
@inproceedings{EssingholtMeyerKuhnetal.2018,
  author    = {Essingholt, Felix and Meyer, Frederic and Kuhn, Peter and Schmidt, Philip and Benkner, Thorsten and Grabmaier, Anton},
  title     = {Non-invasive heart beat measurement using microwave resonators},
  series = {Proceedings, Vol. 2, Eurosensors 2018 Conference, Graz, Austria, 9-12 September 2018},
  booktitle = {Proceedings, Vol. 2, Eurosensors 2018 Conference, Graz, Austria, 9-12 September 2018},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {2504-3900},
  doi       = {10.3390/proceedings2131002},
  pages     = {1002},
  year      = {2018},
  language  = {en}
}
@inproceedings{StopforthDavrajhFerrein2017,
  author    = {Stopforth, Riaan and Davrajh, Shaniel and Ferrein, Alexander},
  title     = {Design considerations of the duo fugam dual rotor UAV},
  series = {2017 Pattern Recognition Association of South Africa and Robotics and Mechatronics (PRASA-RobMech)},
  booktitle = {2017 Pattern Recognition Association of South Africa and Robotics and Mechatronics (PRASA-RobMech)},
  isbn      = {978-1-5386-2314-5},
  doi       = {10.1109/RoboMech.2017.8261115},
  pages     = {7 -- 13},
  year      = {2017},
  language  = {en}
}
@inproceedings{HofmannMatareNeumannetal.2018,
  author    = {Hofmann, Till and Matar{\´e}, Victor and Neumann, Tobias and Sch{\"o}nitz, Sebastian and Henke, Christoph and Limpert, Nicolas and Niemueller, Tim and Ferrein, Alexander and Jeschke, Sabina and Lakemeyer, Gerhard},
  title     = {Enhancing Software and Hardware Reliability for a Successful Participation in the RoboCup Logistics League 2017},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-00308-1},
  doi       = {10.1007/978-3-030-00308-1_40},
  pages     = {486 -- 497},
  year      = {2018},
  language  = {en}
}
@inproceedings{FerreinSchifferKallweit2018,
  author    = {Ferrein, Alexander and Schiffer, Stefan and Kallweit, Stephan},
  title     = {The ROSIN Education Concept - Fostering ROS Industrial-Related Robotics Education in Europe},
  series = {ROBOT 2017: Third Iberian Robotics Conference},
  booktitle = {ROBOT 2017: Third Iberian Robotics Conference},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-319-70836-2},
  doi       = {10.1007/978-3-319-70836-2_31},
  pages     = {370 -- 381},
  year      = {2018},
  language  = {en}
}
@inproceedings{AlhwarinSchifferFerreinetal.2018,
  author    = {Alhwarin, Faraj and Schiffer, Stefan and Ferrein, Alexander and Scholl, Ingrid},
  title     = {Optimized KinectFusion Algorithm for 3D Scanning Applications},
  series = {Proceedings of the 11th International Joint Conference on Biomedical Engineering Systems and Technologies - Volume 2: BIOIMAGING},
  booktitle = {Proceedings of the 11th International Joint Conference on Biomedical Engineering Systems and Technologies - Volume 2: BIOIMAGING},
  isbn      = {978-989-758-278-3},
  doi       = {10.5220/0006594700500057},
  pages     = {50 -- 57},
  year      = {2018},
  language  = {en}
}
@inproceedings{HofmannMatareSchifferetal.2018,
  author    = {Hofmann, Till and Matar{\´e}, Victor and Schiffer, Stefan and Ferrein, Alexander and Lakemeyer, Gerhard},
  title     = {Constraint-based online transformation of abstract plans into executable robot actions},
  series = {Proceedings of the 2018 AAAI Spring Symposium on Integrating Representation, Reasoning, Learning, and Execution for Goal Directed Autonomy},
  booktitle = {Proceedings of the 2018 AAAI Spring Symposium on Integrating Representation, Reasoning, Learning, and Execution for Goal Directed Autonomy},
  pages     = {549 -- 553},
  year      = {2018},
  language  = {en}
}
@inproceedings{AlhwarinFerreinScholl2018,
  author    = {Alhwarin, Faraj and Ferrein, Alexander and Scholl, Ingrid},
  title     = {CRVM: Circular Random Variable-based Matcher - A Novel Hashing Method for Fast NN Search in High-dimensional Spaces},
  series = {Proceedings of the 7th International Conference on Pattern Recognition Applications and Methods, ICPRAM 2018},
  booktitle = {Proceedings of the 7th International Conference on Pattern Recognition Applications and Methods, ICPRAM 2018},
  isbn      = {978-989-758-276-9},
  doi       = {10.5220/0006692802140221},
  pages     = {214 -- 221},
  year      = {2018},
  language  = {en}
}
@inproceedings{SchollSuderSchiffer2018,
  author    = {Scholl, Ingrid and Suder, Sebastian and Schiffer, Stefan},
  title     = {Direct Volume Rendering in Virtual Reality},
  series = {Bildverarbeitung f{\"u}r die Medizin 2018},
  booktitle = {Bildverarbeitung f{\"u}r die Medizin 2018},
  publisher = {Springer Vieweg},
  address   = {Berlin},
  isbn      = {978-3-662-56537-7},
  doi       = {10.1007/978-3-662-56537-7_79},
  pages     = {297 -- 302},
  year      = {2018},
  language  = {en}
}
@inproceedings{StephanHeuermannPrantner2016,
  author    = {Stephan, Achim and Heuermann, Holger and Prantner, Michael},
  title     = {Cutting human tissue with novel atmospheric-pressure microwave plasma jet},
  series = {46th European Microwave Conference (EuMC)},
  booktitle = {46th European Microwave Conference (EuMC)},
  publisher = {IEEE},
  isbn      = {978-2-87487-043-9},
  doi       = {10.1109/EuMC.2016.7824490},
  pages     = {902 -- 905},
  year      = {2016},
  language  = {en}
}
@inproceedings{SchoppHeuermannMarso2017,
  author    = {Schopp, Christoph and Heuermann, Holger and Marso, Michel},
  title     = {Multiphysical Study of an Atmospheric Microwave Argon Plasma Jet},
  series = {IEEE Transactions on Plasma Science},
  volume    = {45},
  booktitle = {IEEE Transactions on Plasma Science},
  number    = {6},
  publisher = {IEEE},
  issn      = {1939-9375},
  doi       = {10.1109/TPS.2017.2692735},
  pages     = {932 -- 937},
  year      = {2017},
  language  = {en}
}
@inproceedings{HarzheimHeuermann2018,
  author    = {Harzheim, Thomas and Heuermann, Holger},
  title     = {Phase Repeatable Synthesizers as a New Harmonic Phase Standard for Nonlinear Network Analysis},
  series = {IEEE Transactions on Microwave Theory and Techniques},
  booktitle = {IEEE Transactions on Microwave Theory and Techniques},
  publisher = {IEEE},
  doi       = {10.1109/TMTT.2018.2817513},
  pages     = {1 -- 8},
  year      = {2018},
  language  = {en}
}
@inproceedings{HueningHeuermannWache2018,
  author    = {H{\"u}ning, Felix and Heuermann, Holger and Wache, Franz-Josef},
  title     = {Wireless CAN},
  series = {Tagungsband AALE 2018 : das Forum f{\"u}r Fachleute der Automatisierungstechnik aus Hochschulen und Wirtschaft ; 15. Fachkonferenz, Regensburg ; [15. Konferenz f{\"u}r Angewandte Automatisierungstechnik in Lehre und Entwicklung / TH K{\"o}ln; VFAALE, Verein der Freunde und F{\"o}rderer der Angewandten Automatisierungstechnik]},
  booktitle = {Tagungsband AALE 2018 : das Forum f{\"u}r Fachleute der Automatisierungstechnik aus Hochschulen und Wirtschaft ; 15. Fachkonferenz, Regensburg ; [15. Konferenz f{\"u}r Angewandte Automatisierungstechnik in Lehre und Entwicklung / TH K{\"o}ln; VFAALE, Verein der Freunde und F{\"o}rderer der Angewandten Automatisierungstechnik]},
  publisher = {VDE Verlag},
  pages     = {135 -- 144},
  year      = {2018},
  abstract  = {Das vorgestellte System zu Wireless CAN bietet die M{\"o}glichkeit, CAN kabellos zu {\"u}bertragen. Beide vorgestellten und entwickelten Konzepte funktionieren korrekt und erm{\"o}glichen den Auf-bau von kabellosen CAN Schnittstellen. Durch den kleinen Aufbau kann diese Technologie auch f{\"u}r eingebettete Systeme verwendet werden. Zudem bietet dieser Ansatz die M{\"o}glichkeit, durch die Entwicklung von geeigneten ICs die Gr{\"o}ße des Systems bis auf Bauteilgr{\"o}ße zu reduzieren, um eine noch bessere Integration in eingebettete Systeme zu erm{\"o}glichen. Dadurch wird die Technologie attraktiv f{\"u}r Einsatzgebiete, wo die oben aufgelisteten Vorteile zum Tragen kommen k{\"o}nnen. Diese Einsatzgebiete k{\"o}nnen sowohl im Automobil als auch im Industriebereich liegen.},
  language  = {de}
}
@inproceedings{SchifferFerrein2017,
  author    = {Schiffer, Stefan and Ferrein, Alexander},
  title     = {A System Layout for Cognitive Service Robots},
  series = {Cognitive Robot Architectures. Proceedings of EUCognition 2016},
  booktitle = {Cognitive Robot Architectures. Proceedings of EUCognition 2016},
  issn      = {1613-0073},
  pages     = {44 -- 45},
  year      = {2017},
  language  = {en}
}
@inproceedings{MarcoFerrein2017,
  author    = {Marco, Heather G. and Ferrein, Alexander},
  title     = {AGNES: The African-German Network of Excellence in Science},
  series = {Proceedings of the 2nd Developing World Robotics Forum, Workshop at IEEE AFRICON 2017},
  booktitle = {Proceedings of the 2nd Developing World Robotics Forum, Workshop at IEEE AFRICON 2017},
  pages     = {1 -- 2},
  year      = {2017},
  language  = {en}
}
@inproceedings{ZugNiemuellerHochgeschwenderetal.2017,
  author    = {Zug, Sebastian and Niemueller, Tim and Hochgeschwender, Nico and Seidensticker, Kai and Seidel, Martin and Friedrich, Tim and Neumann, Tobias and Karras, Ulrich and Kraetzschmar, Gerhard K. and Ferrein, Alexander},
  title     = {An Integration Challenge to Bridge the Gap Among Industry-Inspired RoboCup Leagues},
  series = {RoboCup 2016: Robot World Cup XX. RoboCup 2016.},
  booktitle = {RoboCup 2016: Robot World Cup XX. RoboCup 2016.},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-319-68792-6},
  doi       = {10.1007/978-3-319-68792-6_13},
  pages     = {157 -- 168},
  year      = {2017},
  language  = {en}
}
@inproceedings{NiemuellerNeumannHenkeetal.2017,
  author    = {Niemueller, Tim and Neumann, Tobias and Henke, Christoph and Sch{\"o}nitz, Sebastian and Reuter, Sebastian and Ferrein, Alexander and Jeschke, Sabina and Lakemeyer, Gerhard},
  title     = {International Harting Open Source Award 2016: Fawkes for the RoboCup Logistics League},
  series = {RoboCup 2016: RoboCup 2016: Robot World Cup XX. RoboCup 2016},
  booktitle = {RoboCup 2016: RoboCup 2016: Robot World Cup XX. RoboCup 2016},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-319-68792-6},
  doi       = {10.1007/978-3-319-68792-6_53},
  pages     = {634 -- 642},
  year      = {2017},
  language  = {en}
}
@inproceedings{WalentaSchellekensFerreinetal.2017,
  author    = {Walenta, Robert and Schellekens, Twan and Ferrein, Alexander and Schiffer, Stefan},
  title     = {A decentralised system approach for controlling AGVs with ROS},
  series = {AFRICON, Proceedings},
  booktitle = {AFRICON, Proceedings},
  publisher = {IEEE},
  isbn      = {978-1-5386-2775-4},
  issn      = {2153-0033},
  doi       = {10.1109/AFRCON.2017.8095693},
  pages     = {1436 -- 1441},
  year      = {2017},
  language  = {en}
}
@inproceedings{StopforthDavrajhFerrein2017,
  author    = {Stopforth, Riaan and Davrajh, Shaniel and Ferrein, Alexander},
  title     = {South African robotics entity for a collaboration initiative},
  series = {Pattern Recognition Association of South Africa and Robotics and Mechatronics International Conference (PRASA-RobMech), 2016},
  booktitle = {Pattern Recognition Association of South Africa and Robotics and Mechatronics International Conference (PRASA-RobMech), 2016},
  publisher = {IEEE},
  isbn      = {978-1-5090-3335-5},
  doi       = {10.1109/RoboMech.2016.7813144},
  pages     = {1 -- 6},
  year      = {2017},
  language  = {en}
}