@inproceedings{EichlerSkupinThurnetal.2019,
  author    = {Eichler, Fabian and Skupin, Marco and Thurn, Laura and Kasch, Susanne and Schmidt, Thomas},
  title     = {Operating limits for beam melting of glass materials},
  series = {Modern Technologies in Manufacturing (MTeM 2019)},
  volume    = {299},
  booktitle = {Modern Technologies in Manufacturing (MTeM 2019)},
  number    = {Article 01004},
  doi       = {10.1051/matecconf/201929901004},
  pages     = {8 Seiten},
  year      = {2019},
  abstract  = {Laser-based Additive Manufacturing (AM) processes for the use of metals out of the powder bed have been investigated profusely and are prevalent in industry. Although there is a broad field of application, Laser Powder Bed Fusion (LPBF), also known as Selective Laser Melting (SLM) of glass is not fully developed yet. The material properties of glass are significantly different from the investigated metallic material for LPBF so far. As such, the process cannot be transferred, and the parameter limits and the process sequence must be redefined for glass. Starting with the characterization of glass powders, a parameter field is initially confined to investigate the process parameter of different glass powder using LPBFprocess. A feasibility study is carried out to process borosilicate glass powder. The effects of process parameters on the dimensional accuracy of fabricated parts out of borosilicate and hints for the post-processing are analysed and presented in this paper.},
  language  = {en}
}
@inproceedings{AbbasThurnKessleretal.2019,
  author    = {Abbas, Karim and Thurn, Laura and Kessler, Julia and Eichler, Fabian},
  title     = {Basic research of the consideration of additive manufactured lattice structures under thermoand fluid dynamic loads},
  series = {Modern technologies in manufacturing (MTeM 2019)},
  volume    = {299},
  booktitle = {Modern technologies in manufacturing (MTeM 2019)},
  number    = {Article 01009},
  doi       = {10.1051/matecconf/201929901009},
  pages     = {8 Seiten},
  year      = {2019},
  language  = {en}
}
@inproceedings{LuftGebhardtBalc2019,
  author    = {Luft, Angela and Gebhardt, Andreas and Balc, Nicolae},
  title     = {Challenges of additive manufacturing in production systems},
  series = {Modern technologies in manufacturing (MTeM 2019)},
  volume    = {299},
  booktitle = {Modern technologies in manufacturing (MTeM 2019)},
  number    = {Article 01003},
  doi       = {10.1051/matecconf/201929901003},
  pages     = {6 Seiten},
  year      = {2019},
  language  = {en}
}
@article{FingerBilBraun2019,
  author    = {Finger, Felix and Bil, Cees and Braun, Carsten},
  title     = {Initial Sizing Methodology for Hybrid-Electric General Aviation Aircraft},
  series = {Journal of Aircraft},
  volume    = {57},
  journal   = {Journal of Aircraft},
  number    = {2},
  issn      = {1533-3868},
  doi       = {10.2514/1.C035428},
  pages     = {245 -- 255},
  year      = {2019},
  language  = {en}
}
@phdthesis{Engelmann2019,
  author    = {Engelmann, Ulrich M.},
  title     = {Assessing magnetic fluid hyperthermia : magnetic relaxation simulation, modeling of nanoparticle uptake inside pancreatic tumor cells and in vitro efficacy},
  publisher = {Infinite Science Publishing},
  address   = {L{\"u}beck},
  isbn      = {978-3-945954-58-4},
  year      = {2019},
  language  = {en}
}
@article{ChenJostVolkeretal.2017,
  author    = {Chen, Chao and Jost, Peter and Volker, Hanno and Kaminski, Marvin and Wirtssohn, Matti R. and Engelmann, Ulrich M. and Kr{\"u}ger, K. and Schlich, Franziska F. and Schlockermann, Carl and Lobo, Ricardo P.S.M. and Wuttig, Matthias},
  title     = {Dielectric properties of amorphous phase-change materials},
  series = {Physical Review B},
  volume    = {95},
  journal   = {Physical Review B},
  number    = {9},
  issn      = {2469-9950},
  doi       = {10.1103/PhysRevB.95.094111},
  pages     = {Article number 094111},
  year      = {2017},
  language  = {en}
}
@article{EngelmannBuhlBaumannetal.2017,
  author    = {Engelmann, Ulrich M. and Buhl, Eva Miriam and Baumann, Martin and Schmitz-Rode, Thomas and Slabu, Ioana},
  title     = {Agglomeration of magnetic nanoparticles and its effects on magnetic hyperthermia},
  series = {Current Directions in Biomedical Engineering},
  volume    = {3},
  journal   = {Current Directions in Biomedical Engineering},
  number    = {2},
  publisher = {De Gruyter},
  address   = {Berlin},
  issn      = {2364-5504},
  doi       = {10.1515/cdbme-2017-0096},
  pages     = {457 -- 460},
  year      = {2017},
  language  = {en}
}
@article{EngelmannBuhlDraacketal.2018,
  author    = {Engelmann, Ulrich M. and Buhl, Eva Miriam and Draack, Sebastian and Viereck, Thilo and Frank, and Schmitz-Rode, Thomas and Slabu, Ioana},
  title     = {Magnetic relaxation of agglomerated and immobilized iron oxide nanoparticles for hyperthermia and imaging applications},
  series = {IEEE Magnetic Letters},
  volume    = {9},
  journal   = {IEEE Magnetic Letters},
  number    = {Article number 8519617},
  publisher = {IEEE},
  address   = {New York, NY},
  issn      = {1949-307X},
  doi       = {10.1109/LMAG.2018.2879034},
  year      = {2018},
  abstract  = {Magnetic nanoparticles (MNPs) are used as therapeutic and diagnostic agents for local delivery of heat and image contrast enhancement in diseased tissue. Besides magnetization, the most important parameter that determines their performance for these applications is their magnetic relaxation, which can be affected when MNPs immobilize and agglomerate inside tissues. In this letter, we investigate different MNP agglomeration states for their magnetic relaxation properties under excitation in alternating fields and relate this to their heating efficiency and imaging properties. With focus on magnetic fluid hyperthermia, two different trends in MNP heating efficiency are measured: an increase by up to 23\% for agglomerated MNP in suspension and a decrease by up to 28\% for mixed states of agglomerated and immobilized MNP, which indicates that immobilization is the dominant effect. The same comparatively moderate effects are obtained for the signal amplitude in magnetic particle spectroscopy.},
  language  = {en}
}
@article{EngelmannRoethEberbecketal.2018,
  author    = {Engelmann, Ulrich M. and Roeth, Anjali A.J. and Eberbeck, Dietmar and Buhl, Eva Miriam and Neumann, Ulf Peter and Schmitz-Rode, Thomas and Slabu, Ioana},
  title     = {Combining Bulk Temperature and Nanoheating Enables Advanced Magnetic Fluid Hyperthermia Efficacy on Pancreatic Tumor Cells},
  series = {Scientific Reports},
  volume    = {8},
  journal   = {Scientific Reports},
  number    = {1},
  publisher = {Springer Nature},
  address   = {Cham},
  issn      = {2045-2322},
  doi       = {10.1038/s41598-018-31553-9},
  pages     = {Article number 13210},
  year      = {2018},
  abstract  = {Many efforts are made worldwide to establish magnetic fluid hyperthermia (MFH) as a treatment for organ-confined tumors. However, translation to clinical application hardly succeeds as it still lacks of understanding the mechanisms determining MFH cytotoxic effects. Here, we investigate the intracellular MFH efficacy with respect to different parameters and assess the intracellular cytotoxic effects in detail. For this, MiaPaCa-2 human pancreatic tumor cells and L929 murine fibroblasts were loaded with iron-oxide magnetic nanoparticles (MNP) and exposed to MFH for either 30 min or 90 min. The resulting cytotoxic effects were assessed via clonogenic assay. Our results demonstrate that cell damage depends not only on the obvious parameters bulk temperature and duration of treatment, but most importantly on cell type and thermal energy deposited per cell during MFH treatment. Tumor cell death of 95\% was achieved by depositing an intracellular total thermal energy with about 50\% margin to damage of healthy cells. This is attributed to combined intracellular nanoheating and extracellular bulk heating. Tumor cell damage of up to 86\% was observed for MFH treatment without perceptible bulk temperature rise. Effective heating decreased by up to 65\% after MNP were internalized inside cells.},
  language  = {en}
}
@article{EngelmannSeifertMuesetal.2019,
  author    = {Engelmann, Ulrich M. and Seifert, Julian and Mues, Benedikt and Roitsch, Stefan and M{\´e}nager, Christine and Schmidt, Annette M. and Slabu, Ioana},
  title     = {Heating efficiency of magnetic nanoparticles decreases with gradual immobilization in hydrogels},
  series = {Journal of Magnetism and Magnetic Materials},
  volume    = {471},
  journal   = {Journal of Magnetism and Magnetic Materials},
  number    = {1},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0304-8853},
  doi       = {10.1016/j.jmmm.2018.09.113},
  pages     = {486 -- 494},
  year      = {2019},
  language  = {en}
}
@article{EngelmannShashaTeemanetal.2019,
  author    = {Engelmann, Ulrich M. and Shasha, Carolyn and Teeman, Eric and Slabu, Iona and Krishnan, Kannan M.},
  title     = {Predicting size-dependent heating efficiency of magnetic nanoparticles from experiment and stochastic N{\´e}el-Brown Langevin simulation},
  series = {Journal of Magnetism and Magnetic Materials},
  volume    = {471},
  journal   = {Journal of Magnetism and Magnetic Materials},
  number    = {1},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0304-8853},
  doi       = {10.1016/j.jmmm.2018.09.041},
  pages     = {450 -- 456},
  year      = {2019},
  language  = {en}
}
@article{SlabuRoethEngelmannetal.2019,
  author    = {Slabu, Ioana and Roeth, Anjali A. and Engelmann, Ulrich M. and Wiekhorst, Frank and Buhl, Eva M. and Neumann, Ulf P. and Schmitz-Rode, Thomas},
  title     = {Modeling of magnetoliposome uptake in human pancreatic tumor cells in vitro},
  series = {Nanotechnology},
  volume    = {30},
  journal   = {Nanotechnology},
  number    = {18},
  issn      = {1361-6528},
  doi       = {10.1088/1361-6528/ab033e},
  pages     = {184004},
  year      = {2019},
  language  = {en}
}
@inproceedings{MatchaKarzelQuasten2008,
  author    = {Matcha, Heike and Karzel, R{\"u}diger and Quasten, Gero},
  title     = {Architectural Design with Parametric Modeling \& Customized Mass Production: Explorations and Case Studies in Architectural Design and Production Methods},
  series = {Language and the Scientific Imagination. The 11th International Conference of ISSEI, Language Centre, University of Helsinki (Finland) 28 July - 2 August 2008},
  booktitle = {Language and the Scientific Imagination. The 11th International Conference of ISSEI, Language Centre, University of Helsinki (Finland) 28 July - 2 August 2008},
  pages     = {19 Seiten},
  year      = {2008},
  language  = {en}
}
@inproceedings{Matcha2007,
  author    = {Matcha, Heike},
  title     = {Parametric possibilities: designing with parametric modelling},
  series = {Predicting the Future [25th eCAADe Conference Proceedings]},
  booktitle = {Predicting the Future [25th eCAADe Conference Proceedings]},
  isbn      = {978-0-9541183-6-5},
  pages     = {849 -- 856},
  year      = {2007},
  language  = {en}
}
@inproceedings{KarzerMatcha2009,
  author    = {Karzer, R{\"u}diger and Matcha, Heike},
  title     = {Experimental design-build: teaching parameter-based design},
  series = {Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings]},
  booktitle = {Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings]},
  isbn      = {978-0-9541183-8-9},
  doi       = {10.52842/conf.ecaade.2009.153},
  pages     = {153 -- 158},
  year      = {2009},
  language  = {en}
}
@inproceedings{MatchaQuasten2009,
  author    = {Matcha, Heike and Quasten, Gero},
  title     = {A Parametric-Typological Tool: More Diversity for Mass Produced Single Family Homes Through Parametrized Design and Customized Mass Production},
  series = {Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings},
  booktitle = {Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings},
  isbn      = {978-0-9541183-8-9},
  pages     = {409 -- 416},
  year      = {2009},
  language  = {en}
}
@inproceedings{MatchaLjubas2010,
  author    = {Matcha, Heike and Ljubas, Ante},
  title     = {Parametric Origami: Adaptable temporary buildings},
  series = {Future cities: 28th eCAADe Conference Proceedings. eCAADe: Conferences. Zurich, Switzerland},
  booktitle = {Future cities: 28th eCAADe Conference Proceedings. eCAADe: Conferences. Zurich, Switzerland},
  isbn      = {978-0-9541183-7-2},
  pages     = {243 -- 251},
  year      = {2010},
  language  = {en}
}
@article{EngelGemuendeHoltmannetal.2019,
  author    = {Engel, Mareike and Gem{\"u}nde, Andre and Holtmann, Dirk and M{\"u}ller-Renno, Christine and Ziegler, Christiane and Tippk{\"o}tter, Nils and Ulber, Roland},
  title     = {Clostridium acetobutylicum's connecting world: cell appendage formation in bioelectrochemical systems},
  series = {ChemElectroChem},
  journal   = {ChemElectroChem},
  number    = {Accepted Article},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {2196-0216},
  doi       = {10.1002/celc.201901656},
  year      = {2019},
  language  = {en}
}
@incollection{MatchaBarczik2011,
  author    = {Matcha, Heike and Barczik, G{\"u}nter},
  title     = {Mass Diversity: Individualized housing via parametric typology},
  series = {Structuralism Reloaded? Rule-Based Design in Architecture and Urbanism},
  booktitle = {Structuralism Reloaded? Rule-Based Design in Architecture and Urbanism},
  editor    = {Valena, Tomas and Avermaete, Tom and Vrachliotis, Georg},
  publisher = {Edition Axel Menges},
  address   = {Fellbach},
  isbn      = {978-3-936681-47-5},
  pages     = {354 -- 358},
  year      = {2011},
  language  = {en}
}
@article{DigelAkimbekovTuralievaetal.2013,
  author    = {Digel, Ilya and Akimbekov, N. and Turalieva, M. and Mansurov, Z. and Temiz Artmann, Ayseg{\"u}l and Eshibaev, A. and Zhubanova, A.},
  title     = {Usage of Carbonized Plant Wastes for Purification of Aqueous Solutions},
  series = {Journal of Industrial Technology and Engineering},
  volume    = {2},
  journal   = {Journal of Industrial Technology and Engineering},
  number    = {07},
  pages     = {47 -- 54},
  year      = {2013},
  language  = {en}
}