@incollection{SchneiderWisselinkNoelleetal.2020, author = {Schneider, Dominik and Wisselink, Frank and N{\"o}lle, Nikolai and Czarnecki, Christian}, title = {Influence of artificial intelligence on commercial interactions in the consumer market}, series = {Automatisierung und Personalisierung von Dienstleistungen : Methoden - Potenziale - Einsatzfelder}, booktitle = {Automatisierung und Personalisierung von Dienstleistungen : Methoden - Potenziale - Einsatzfelder}, editor = {Bruhn, Manfred and Hadwich, Karsten}, publisher = {Springer Gabler}, address = {Wiesbaden}, isbn = {978-3-658-30167-5 (Print)}, doi = {10.1007/978-3-658-30168-2_7}, pages = {183 -- 205}, year = {2020}, abstract = {Recently, novel AI-based services have emerged in the consumer market. AI-based services can affect the way consumers take commercial decisions. Research on the influence of AI on commercial interactions is in its infancy. In this chapter, a framework creating a first overview of the influence of AI on commercial interactions is introduced. This framework summarizes the findings of comparing numerous customer journeys of novel AI-based services with corresponding non-AI equivalents.}, language = {en} } @incollection{AuthCzarneckiBensbergetal.2019, author = {Auth, Gunnar and Czarnecki, Christian and Bensberg, Frank and Thor, Andreas}, title = {Digitalisierung des Forschungsprozesses aus Sicht von Forschenden - durch Serviceintegration zum pers{\"o}nlichen Forschungsinformationssystem}, series = {Hochschulen in Zeiten der Digitalisierung : Lehre, Forschung und Organisation}, booktitle = {Hochschulen in Zeiten der Digitalisierung : Lehre, Forschung und Organisation}, editor = {Barton, Thomas and M{\"u}ller, Christian and Seel, Christian}, publisher = {Springer Vieweg}, address = {Wiesbaden}, isbn = {978-3-658-26617-2 (Print)}, doi = {10.1007/978-3-658-26618-9_17}, pages = {287 -- 307}, year = {2019}, abstract = {In der Diskussion {\"u}ber die Digitalisierung der Forschung spielt die Frage nach der optimalen IT-Unterst{\"u}tzung f{\"u}r Forschende eine wichtige Rolle. Forschende k{\"o}nnen heute an ihren Hochschulen bzw. Wissenschaftseinrichtungen auf ein breites Angebot interner IT-Dienstleistungen zur{\"u}ckgreifen, das auch kooperative IT-Dienste umfasst, die von mehreren Institutionen in Zusammenarbeit bereitgestellt werden. Außerhalb der eigenen Organisation und des weiteren Verbunds hat sich im Internet zudem ein breites externes Angebot an innovativen, h{\"a}ufig kostenlos nutzbaren Onlinediensten entwickelt. Neben horizontalen Onlinediensten, die sich prinzipiell an jeden Internetnutzer richten (bspw. Dropbox, Twitter, WhatsApp), nimmt auch die Zahl von vertikalen Diensten f{\"u}r wissenschaftliche bzw. Forschungszwecke immer weiter zu (bspw. GoogleScholar, ResearchGate, figshare). F{\"u}r Forschende er{\"o}ffnen sich damit vielf{\"a}ltige neue M{\"o}glichkeiten, ihren individuellen Forschungsprozess durch digitale Werkzeuge zu verbessern. Aufgrund rechtlicher, technischer und personeller Restriktionen k{\"o}nnen jedoch interne Dienstleister bei der Identifizierung, Auswahl und Nutzung externer Onlinedienste nur wenig Unterst{\"u}tzung leisten. Aus einer serviceorientierten Perspektive stehen Forschende zunehmend vor dem Problem, wie sich heterogene IT-Dienste interner und externer Anbieter in den eigenen Forschungsprozess integrieren lassen. Als L{\"o}sungsansatz skizziert das Kapitel das Konzept eines pers{\"o}nlichen Forschungsinformationssystems nach Gesichtspunkten eines digitalen Servicesystems.}, language = {de} } @incollection{BensbergBuscherCzarnecki2019, author = {Bensberg, Frank and Buscher, Gandalf and Czarnecki, Christian}, title = {Digital transformation and IT topics in the consulting industry: a labor market perspective}, series = {Advances in consulting research : recent findings and practical cases}, booktitle = {Advances in consulting research : recent findings and practical cases}, editor = {Nissen, Volker}, publisher = {Springer}, address = {Cham}, isbn = {978-3-319-95998-6}, doi = {10.1007/978-3-319-95999-3_16}, pages = {341 -- 357}, year = {2019}, abstract = {Information technologies, such as big data analytics, cloud computing, cyber physical systems, robotic process automation, and the internet of things, provide a sustainable impetus for the structural development of business sectors as well as the digitalization of markets, enterprises, and processes. Within the consulting industry, the proliferation of these technologies opened up the new segment of digital transformation, which focuses on setting up, controlling, and implementing projects for enterprises from a broad range of sectors. These recent developments raise the question, which requirements evolve for IT consultants as important success factors of those digital transformation projects. Therefore, this empirical contribution provides indications regarding the qualifications and competences necessary for IT consultants in the era of digital transformation from a labor market perspective. On the one hand, this knowledge base is interesting for the academic education of consultants, since it supports a market-oriented design of adequate training measures. On the other hand, insights into the competence requirements for consultants are considered relevant for skill and talent management processes in consulting practice. Assuming that consulting companies pursue a strategic human resource management approach, labor market information may also be useful to discover strategic behavioral patterns.}, language = {en} } @incollection{BensbergCzarneckiGrob2022, author = {Bensberg, Frank and Czarnecki, Christian and Grob, Heinz Lothar}, title = {Wirtschaftlichkeitsbewertung von Smart Services mit vollst{\"a}ndigen Finanzpl{\"a}nen}, series = {Smart Services: Band 1: Konzepte - Methoden - Prozesse}, booktitle = {Smart Services: Band 1: Konzepte - Methoden - Prozesse}, editor = {Bruhn, Manfred and Hadwich, Karsten}, publisher = {Springer Gabler}, address = {Wiesbaden}, isbn = {978-3-658-37344-3 (Online)}, doi = {10.1007/978-3-658-37344-3_6}, pages = {225 -- 251}, year = {2022}, abstract = {Dieser Beitrag stellt einen Bewertungsrahmen f{\"u}r Smart Services vor, der auf dem Konzept vollst{\"a}ndiger Finanzpl{\"a}ne (VOFI) basiert. Zun{\"a}chst wird eine IoT-Architektur f{\"u}r Smart Services eingef{\"u}hrt, die die Grundlage f{\"u}r deren Betrachtung aus Sicht der Unternehmensplanung liefert. Hierauf aufbauend wird ein Bewertungsrahmen f{\"u}r die finanzplanorientierte Wirtschaftlichkeitsbewertung von Smart Services geschaffen, mit dem die relevanten Zahlungsfolgen differenziert erfasst werden. Mithilfe des entwickelten VOFI-Systems wird anschließend aufgezeigt, wie mithilfe einer Risikoanalyse die Unsicherheit von Modellparametern ber{\"u}cksichtigt werden kann.}, language = {de} } @book{JanserHavermannHoeveleretal.2016, author = {Janser, Frank and Havermann, Marc and Hoeveler, Bastian and Hertz, Cyril}, title = {Inkompressible Profil- und Tragfl{\"u}gelaerodynamik}, series = {Str{\"o}mungslehre und Aerodynamik ; Band 2}, journal = {Str{\"o}mungslehre und Aerodynamik ; Band 2}, edition = {1. Auflage}, publisher = {Verlagshaus Mainz GmbH}, address = {Aachen}, isbn = {978-3-8107-0261-6}, pages = {XIII, 208 Seiten}, year = {2016}, language = {de} } @article{BartellaKamalScholletal.2019, author = {Bartella, Alexander K. and Kamal, Mohammad and Scholl, Ingrid and Schiffer, Stefan and Steegmann, Julius and Ketelsen, Dominik and H{\"o}lzle, Frank W. and Lethaus, Bernd}, title = {Virtual reality in preoperative imaging in maxillofacial surgery: implementation of "the next level"?}, series = {British Journal of Oral and Maxillofacial Surgery}, volume = {57}, journal = {British Journal of Oral and Maxillofacial Surgery}, number = {7}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0266-4356}, doi = {10.1016/j.bjoms.2019.02.014}, pages = {644 -- 648}, year = {2019}, language = {en} } @inproceedings{HoevelerJanser2016, author = {Hoeveler, Bastian and Janser, Frank}, title = {The aerodynamically optimized design of a fan-in-wing duct}, series = {Applied Aerodynamics Research Conference 2016, Bristol, GB, Jul 19-21, 2016}, booktitle = {Applied Aerodynamics Research Conference 2016, Bristol, GB, Jul 19-21, 2016}, isbn = {1-85768-371-4}, pages = {1 -- 10}, year = {2016}, language = {en} } @inproceedings{GaldiHartungDugelay2019, author = {Galdi, Chiara and Hartung, Frank and Dugelay, Jean-Luc}, title = {Socrates: A database of realistic data for source camera recognition on smartphones}, series = {Proceedings of the 8th International Conference on Pattern Recognition Applications and Methods - Volume 1: ICPRAM}, booktitle = {Proceedings of the 8th International Conference on Pattern Recognition Applications and Methods - Volume 1: ICPRAM}, isbn = {978-989-758-351-3}, doi = {10.5220/0007403706480655}, pages = {648 -- 655}, year = {2019}, language = {en} } @article{HoevelerBauknechtWolfetal.2020, author = {Hoeveler, B. and Bauknecht, Andr{\´e} and Wolf, C. Christian and Janser, Frank}, title = {Wind-Tunnel Study of a Wing-Embedded Lifting Fan Remaining Open in Cruise Flight}, series = {Journal of Aircraft}, volume = {57}, journal = {Journal of Aircraft}, number = {4}, publisher = {AIAA}, address = {Reston, Va.}, issn = {1533-3868}, doi = {10.2514/1.C035422}, year = {2020}, abstract = {It is investigated whether a nonrotating lifting fan remaining uncovered during cruise flight, as opposed to being covered by a shutter system, can be realized with limited additional drag and loss of lift during cruise flight. A wind-tunnel study of a wing-embedded lifting fan has been conducted at the Side Wind Test Facility G{\"o}ttingen of DLR, German Aerospace Center in G{\"o}ttingen using force, pressure, and stereoscopic particle image velocimetry techniques. The study showed that a step on the lower side of the wing in front of the lifting fan duct increases the lift-to-drag ratio of the whole model by up to 25\% for all positive angles of attack. Different sizes and inclinations of the step had limited influence on the surface pressure distribution. The data indicate that these parameters can be optimized to maximize the lift-to-drag ratio. A doubling of the curvature radius of the lifting fan duct inlet lip on the upper side of the wing affected the lift-to-drag ratio by less than 1\%. The lifting fan duct inlet curvature can therefore be optimized to maximize the vertical fan thrust of the rotating lifting fan during hovering without affecting the cruise flight performance with a nonrotating fan.}, language = {en} } @article{NeuJanserKhatibietal.2017, author = {Neu, Eugen and Janser, Frank and Khatibi, Akbar A. and Orifici, Adrian C.}, title = {Fully Automated Operational Modal Analysis using multi-stage clustering}, series = {Mechanical Systems and Signal Processing}, volume = {Vol. 84, Part A}, journal = {Mechanical Systems and Signal Processing}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0888-3270}, doi = {10.1016/j.ymssp.2016.07.031}, pages = {308 -- 323}, year = {2017}, language = {en} } @article{NeuJanserKhatibietal.2016, author = {Neu, Eugen and Janser, Frank and Khatibi, Akbar A. and Orifici, Adrian C.}, title = {Automated modal parameter-based anomaly detection under varying wind excitation}, series = {Structural Health Monitoring}, volume = {15}, journal = {Structural Health Monitoring}, number = {6}, publisher = {Sage}, address = {London}, issn = {1475-9217}, doi = {10.1177/1475921716665803}, pages = {1 -- 20}, year = {2016}, abstract = {Wind-induced operational variability is one of the major challenges for structural health monitoring of slender engineering structures like aircraft wings or wind turbine blades. Damage sensitive features often show an even bigger sensitivity to operational variability. In this study a composite cantilever was subjected to multiple mass configurations, velocities and angles of attack in a controlled wind tunnel environment. A small-scale impact damage was introduced to the specimen and the structural response measurements were repeated. The proposed damage detection methodology is based on automated operational modal analysis. A novel baseline preparation procedure is described that reduces the amount of user interaction to the provision of a single consistency threshold. The procedure starts with an indeterminate number of operational modal analysis identifications from a large number of datasets and returns a complete baseline matrix of natural frequencies and damping ratios that is suitable for subsequent anomaly detection. Mahalanobis distance-based anomaly detection is then applied to successfully detect the damage under varying severities of operational variability and with various degrees of knowledge about the present operational conditions. The damage detection capabilities of the proposed methodology were found to be excellent under varying velocities and angles of attack. Damage detection was less successful under joint mass and wind variability but could be significantly improved through the provision of the currently encountered operational conditions.}, language = {en} } @article{WertIkenSchoeningetal.2021, author = {Wert, Stefan and Iken, Heiko and Sch{\"o}ning, Michael Josef and Matysik, Frank-Michael}, title = {Development of a temperature-pulse enhanced electrochemical glucose biosensor and characterization of its stability via scanning electrochemical microscopy}, series = {Electroanalysis}, journal = {Electroanalysis}, number = {Early View}, publisher = {Wiley-VCH}, address = {Weinheim}, issn = {1521-4109}, doi = {10.1002/elan.202100089}, year = {2021}, abstract = {Glucose oxidase (GOx) is an enzyme frequently used in glucose biosensors. As increased temperatures can enhance the performance of electrochemical sensors, we investigated the impact of temperature pulses on GOx that was drop-coated on flattened Pt microwires. The wires were heated by an alternating current. The sensitivity towards glucose and the temperature stability of GOx was investigated by amperometry. An up to 22-fold increase of sensitivity was observed. Spatially resolved enzyme activity changes were investigated via scanning electrochemical microscopy. The application of short (<100 ms) heat pulses was associated with less thermal inactivation of the immobilized GOx than long-term heating.}, language = {en} } @inproceedings{GaldiHartungDugelay2017, author = {Galdi, Chiara and Hartung, Frank and Dugelay, Jean-Luc}, title = {Videos versus still images: Asymmetric sensor pattern noise comparison on mobile phones}, series = {Electronic Imaging}, booktitle = {Electronic Imaging}, publisher = {Society for Imaging Science and Technology}, address = {Springfield, Virginia}, issn = {2470-1173}, doi = {10.2352/ISSN.2470-1173.2017.7.MWSF-331}, pages = {100 -- 103}, year = {2017}, abstract = {Nowadays, the most employed devices for recoding videos or capturing images are undoubtedly the smartphones. Our work investigates the application of source camera identification on mobile phones. We present a dataset entirely collected by mobile phones. The dataset contains both still images and videos collected by 67 different smartphones. Part of the images consists in photos of uniform backgrounds, especially collected for the computation of the RSPN. Identifying the source camera given a video is particularly challenging due to the strong video compression. The experiments reported in this paper, show the large variation in performance when testing an highly accurate technique on still images and videos.}, language = {en} } @article{ElsenHartungHornetal.2001, author = {Elsen, Ingo and Hartung, Frank and Horn, Uwe and Kampmann, Markus and Peters, Liliane}, title = {Streaming technology in 3G mobile communication systems}, series = {Computer : innovative technology for computer professionals}, volume = {34}, journal = {Computer : innovative technology for computer professionals}, number = {9 Seiten}, editor = {Voas, Jeffrey}, publisher = {IEEE}, address = {New York}, issn = {0018-9162}, pages = {46 -- 52}, year = {2001}, abstract = {Third-generation mobile communication systems will combine standardized streaming with a range of unique services to provide high-quality Internet content that meets the specific needs of the rapidly growing mobile market.}, language = {en} } @inproceedings{ChudobaButenwegPfeiffer2003, author = {Chudoba, Rostislav and Butenweg, Christoph and Pfeiffer, Frank}, title = {Textile reinforced concrete. Part I: Process model for collaborative research and development}, series = {Digital proceedings / IKM 2003, proceedings 16th International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering [Elektronische Ressource : 10. - 12. Juni 2003, Weimar] / Bauhaus-Universit{\"a}t Weimar. Ed.: K. G{\"u}rlebeck; L. Hempel; C. K{\"o}nke}, booktitle = {Digital proceedings / IKM 2003, proceedings 16th International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering [Elektronische Ressource : 10. - 12. Juni 2003, Weimar] / Bauhaus-Universit{\"a}t Weimar. Ed.: K. G{\"u}rlebeck; L. Hempel; C. K{\"o}nke}, publisher = {IKM}, address = {Weimar}, organization = {Internationales Kolloquium {\"u}ber Anwendungen der Informatik und Mathematik in Architektur und Bauwesen <16, 2003, Weimar>}, pages = {1 -- 8}, year = {2003}, language = {en} } @book{EngelnMuellgesUhlig1996, author = {Engeln-M{\"u}llges, Gisela and Uhlig, Frank}, title = {Numerical algorithms with C}, publisher = {Springer}, address = {Berlin [u.a.]}, isbn = {3-540-60530-0}, pages = {XXII, 596 S. : graph. Darst. + 1 CD-ROM}, year = {1996}, language = {en} } @book{EngelnMuellgesUhlig1996, author = {Engeln-M{\"u}llges, Gisela and Uhlig, Frank}, title = {Numeric Algorithms with Fortran}, publisher = {Springer}, address = {Berlin [u.a.]}, isbn = {3-540-60529-0}, pages = {XXII, 602 S. : Ill., graph. Darst. + 1 CD-ROM}, year = {1996}, language = {en} } @article{FerreinDyllaLakemeyeretal.2008, author = {Ferrein, Alexander and Dylla, Frank and Lakemeyer, Gerhard and Murray, Jan}, title = {Approaching a formal soccer theory from behaviour specifications in robotic soccer / Dylla, Frank ; Ferrein, Alexander ; Lakemeyer, Gerhard ; Murray, Jan ; Obst, Oliver ; R{\"o}fer, Thomas ; Schiffer, Stefan ; Stolzenburg, Frieder ; Visser, Ubbo ; Wagner, Tho}, series = {Computers in sport / editors: P Dabnichki}, journal = {Computers in sport / editors: P Dabnichki}, publisher = {WIT Press}, address = {Southampton}, isbn = {978-1-8456-4064-4}, pages = {161 -- 185}, year = {2008}, language = {en} } @inproceedings{WaldmannVeraDachwaldetal.2018, author = {Waldmann, Christoph and Vera, Jean-Pierre de and Dachwald, Bernd and Strasdeit, Henry and Sohl, Frank and Hanff, Hendrik and Kowalski, Julia and Heinen, Dirk and Macht, Sabine and Bestmann, Ulf and Meckel, Sebastian and Hildebrandt, Marc and Funke, Oliver and Gehrt, Jan-J{\"o}ran}, title = {Search for life in ice-covered oceans and lakes beyond Earth}, series = {2018 IEEE/OES Autonomous Underwater Vehicle Workshop, Proceedings November 2018, Article number 8729761}, booktitle = {2018 IEEE/OES Autonomous Underwater Vehicle Workshop, Proceedings November 2018, Article number 8729761}, doi = {10.1109/AUV.2018.8729761}, year = {2018}, abstract = {The quest for life on other planets is closely connected with the search for water in liquid state. Recent discoveries of deep oceans on icy moons like Europa and Enceladus have spurred an intensive discussion about how these waters can be accessed. The challenge of this endeavor lies in the unforeseeable requirements on instrumental characteristics both with respect to the scientific and technical methods. The TRIPLE/nanoAUV initiative is aiming at developing a mission concept for exploring exo-oceans and demonstrating the achievements in an earth-analogue context, exploring the ocean under the ice shield of Antarctica and lakes like Dome-C on the Antarctic continent.}, language = {en} } @inproceedings{HansenLaack2018, author = {Hansen, Frank and Laack, Walter van}, title = {Schnittstelle Tod: Sind Religionen religi{\"o}s und Wissenschaften wissend?}, publisher = {van Laack GmbH}, address = {Aachen}, isbn = {978-3-936624-36-6}, pages = {172 S.}, year = {2018}, language = {de} }