@incollection{ButenwegEbenau1996,
  author    = {Butenweg, Christoph and Ebenau, C.},
  title     = {Entwicklung eines objekt-orientierten FE-Programms},
  series = {Forum Bauinformatik - Junge Wissenschaftler forschen, Cottbus '96},
  booktitle = {Forum Bauinformatik - Junge Wissenschaftler forschen, Cottbus '96},
  publisher = {VDI-Verlag},
  address   = {D{\"u}sseldorf},
  isbn      = {978-3-18-313504-2},
  pages     = {60 -- 65},
  year      = {1996},
  language  = {de}
}
@incollection{ButenwegGellert2007,
  author    = {Butenweg, Christoph and Gellert, Christoph},
  title     = {Berechnung und Bemessung von durch Erdbeben beanspruchten Mauerwerksbauten nach DIN 4149 (04.2005)},
  series = {Mauerwerksbau-Praxis / Schubert ; Schneider ; Schoch (Hrsg.)},
  booktitle = {Mauerwerksbau-Praxis / Schubert ; Schneider ; Schoch (Hrsg.)},
  publisher = {Werner Verlag},
  address   = {Berlin},
  isbn      = {3-9343-6938-3 ; 978-3-9343-6938-2},
  pages     = {363 -- 393},
  year      = {2007},
  language  = {de}
}
@incollection{ButenwegGellert2009,
  author    = {Butenweg, Christoph and Gellert, Christoph},
  title     = {Erdbebenberechnung von Mauerwerksbauten nach DIN EN 1998-1 (12.2010)},
  series = {Mauerwerksbau-Praxis / Schubert; Schneider; Schoch (Hrsg.)},
  booktitle = {Mauerwerksbau-Praxis / Schubert; Schneider; Schoch (Hrsg.)},
  publisher = {Bauwerk},
  address   = {Berlin},
  isbn      = {978-3-89932-217-0},
  pages     = {299 -- 343},
  year      = {2009},
  language  = {de}
}
@incollection{ButenwegGellertMeyer2010,
  author    = {Butenweg, Christoph and Gellert, Christoph and Meyer, Udo},
  title     = {Erdbebenbemessung bei Mauerwerksbauten},
  series = {Mauerwerk-Kalender 2010: Normen f{\"u}r Bemessung und Ausf{\"u}hrung},
  booktitle = {Mauerwerk-Kalender 2010: Normen f{\"u}r Bemessung und Ausf{\"u}hrung},
  publisher = {Ernst \& Sohn},
  address   = {Berlin},
  isbn      = {3-433-60040-6 ; 978-3-433-60040-5},
  doi       = {10.1002/9783433600405.ch7},
  pages     = {141 -- 167},
  year      = {2010},
  language  = {de}
}
@incollection{ButenwegGellertMeyer2021,
  author    = {Butenweg, Christoph and Gellert, Christoph and Meyer, Udo},
  title     = {Erdbebenbemessung bei Mauerwerksbauten},
  series = {Mauerwerk Kalender 2021: Kunststoffverankerungen Digitalisierung im Mauerwerksbau},
  booktitle = {Mauerwerk Kalender 2021: Kunststoffverankerungen Digitalisierung im Mauerwerksbau},
  publisher = {Ernst \& Sohn},
  address   = {Berlin},
  isbn      = {9783433032930},
  doi       = {10.1002/9783433610732.ch12},
  pages     = {329 -- 355},
  year      = {2021},
  abstract  = {Der vorliegende Beitrag stellt den seismischen Nachweis von Mauerwerksbauten in Deutschland auf Grundlage der DIN EN 1998-1/NA vor, wobei auch die wesentlichen {\"A}nderungen zu der Norm DIN 4149 vergleichend erl{\"a}utert werden. Vorgestellt werden die Definition der Erdbebeneinwirkung, das seismische Verhalten von Mauerwerksbauten und die Erl{\"a}uterung der Rechenverfahren. Darauf aufbauend wird die Anwendung an drei Praxisbeispielen demonstriert.},
  language  = {de}
}
@incollection{ButenwegHoltschoppen2019,
  author    = {Butenweg, Christoph and Holtschoppen, Britta},
  title     = {Seismic design of structures and components in industrial units},
  series = {Structural Dynamics with Applications in Earthquake and Wind Engineering},
  booktitle = {Structural Dynamics with Applications in Earthquake and Wind Engineering},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-662-57550-5},
  doi       = {10.1007/978-3-662-57550-5_5},
  pages     = {359 -- 481},
  year      = {2019},
  abstract  = {Industrial units consist of the primary load-carrying structure and various process engineering components, the latter being by far the most important in financial terms. In addition, supply structures such as free-standing tanks and silos are usually required for each plant to ensure the supply of material and product storage. Thus, for the earthquake-proof design of industrial plants, design and construction rules are required for the primary structures, the secondary structures and the supply structures. Within the framework of these rules, possible interactions of primary and secondary structures must also be taken into account. Importance factors are used in seismic design in order to take into account the usually higher risk potential of an industrial unit compared to conventional building structures. Industrial facilities must be able to withstand seismic actions because of possibly wide-ranging damage consequences in addition to losses due to production standstill and the destruction of valuable equipment. The chapter presents an integrated concept for the seismic design of industrial units based on current seismic standards and the latest research results. Special attention is devoted to the seismic design of steel thin-walled silos and tank structures.},
  language  = {en}
}
@incollection{ButenwegKlinkel2014,
  author    = {Butenweg, Christoph and Klinkel, Sven},
  title     = {Dynamisches Verhalten von Stahlbetonplatten unter Impact-Belastungen},
  series = {Massivbau im Wandel : Festschrift zum 60. Geburtstag von Josef Hegger},
  booktitle = {Massivbau im Wandel : Festschrift zum 60. Geburtstag von Josef Hegger},
  publisher = {Ernst},
  address   = {Berlin},
  isbn      = {3-939051-20-9},
  pages     = {369 -- 380},
  year      = {2014},
  language  = {de}
}
@incollection{ButenwegKubalskiMarinkovicetal.2016,
  author    = {Butenweg, Christoph and Kubalski, Thomas and Marinkovic, Marko and Pfetzing, Thomas and Ismail, Mohammed and Fehling, Ekkehard},
  title     = {Ausfachungen aus Ziegelmauerwerk},
  series = {Mauerwerk-Kalender 2016: Baustoffe, Sanierung, Eurocode-Praxis},
  booktitle = {Mauerwerk-Kalender 2016: Baustoffe, Sanierung, Eurocode-Praxis},
  publisher = {Ernst \& Sohn},
  address   = {Berlin},
  isbn      = {978-3-433-03131-5},
  year      = {2016},
  language  = {de}
}
@incollection{ButenwegNorda2014,
  author    = {Butenweg, Christoph and Norda, H.},
  title     = {Erdbebenberechnung von Mauerwerksbauten nach DIN EN 1998-1:2010-12},
  series = {Mauerwerksbau-Praxis nach Eurocode / Schubert, Schneider, Schoch (Hrsg.). - 3., vollst{\"a}ndig {\"u}berarbeitete Auflage},
  booktitle = {Mauerwerksbau-Praxis nach Eurocode / Schubert, Schneider, Schoch (Hrsg.). - 3., vollst{\"a}ndig {\"u}berarbeitete Auflage},
  publisher = {Beuth},
  address   = {Berlin, Wien, Z{\"u}rich},
  isbn      = {978-3-410-22739-7},
  pages     = {367 -- 412},
  year      = {2014},
  language  = {de}
}
@incollection{ButenwegRoeser2012,
  author    = {Butenweg, Christoph and Roeser, W.},
  title     = {Erdbebenbemessung von Stahlbetontragwerken nach DIN EN 1998-1},
  series = {Stahlbetonbau aktuell : Praxishandbuch},
  booktitle = {Stahlbetonbau aktuell : Praxishandbuch},
  publisher = {Beuth},
  address   = {Berlin},
  isbn      = {978-3-410-21932-3 (Print) ; 978-341-02193-3-0 (E-Book)},
  pages     = {A.1 -- A.43},
  year      = {2012},
  language  = {de}
}
@incollection{ButenwegRoeser2016,
  author    = {Butenweg, Christoph and Roeser, W.},
  title     = {Auslegung von Bauwerken gegen Erdbeben - Rechenbeispiele},
  series = {Stahlbetonbau aktuell 2016 : Praxishandbuch / herausgegeben von: Prof. Dr.-Ing. Josef Hegger, Prof. Dr.-Ing. habil. Peter Mark},
  booktitle = {Stahlbetonbau aktuell 2016 : Praxishandbuch / herausgegeben von: Prof. Dr.-Ing. Josef Hegger, Prof. Dr.-Ing. habil. Peter Mark},
  publisher = {Beuth Verlag GmbH},
  address   = {Berlin ; Wien ; Z{\"u}rich},
  isbn      = {978-3-410-25202-3 (Print) ; 978-3-410-25203-0 (E-Book)},
  year      = {2016},
  language  = {de}
}
@incollection{ButenwegThierauf1999,
  author    = {Butenweg, Christoph and Thierauf, G.},
  title     = {Automatic design of reinforced concrete structures with parallel computing},
  series = {Innovative computational methods for structural mechanics},
  booktitle = {Innovative computational methods for structural mechanics},
  editor    = {Papadrakakis, M. and Topping, B.H.V.},
  publisher = {Saxe-Coburg Publication},
  address   = {Edinburgh},
  isbn      = {1-874672-05-9},
  doi       = {10.4203/csets.1.14},
  pages     = {305 -- 318},
  year      = {1999},
  abstract  = {A concept for the analysis and optimal design of reinforced concrete structures is described. It is based on a nonlinear optimization algorithm and a finite element program for linear and nonlinear analysis of structures. With the aim of minimal cost design a two stage optimization using efficient gradient algorithm is developed. The optimization problems on global (structural) and local (crosssectional) level are formulated. A parallelization concept for solving the two stage optimization problem in minimal time is presented. Examples are included to illustrate the practical use and the effectively of the parallelization in the area of engineering design.},
  language  = {en}
}
@incollection{ClassenDoerenCodanietal.2000,
  author    = {Claßen, R. and D{\"o}ren, Horst-Peter and Codani, L. and Watermeyer, Klaus},
  title     = {Begleitende Untersuchungen beim L{\"o}ten mit vor{\"u}bergehend fl{\"u}ssiger Phase (TL PB) einschließlich Aktivkomponente an Verbindungen verschiedener Kupfer- und Kohlenstoffwerkstoffe (CFC).},
  series = {Fortschritte in der Metallographie. Vortragstexte der 33. Metallographie-Tagung, 15.-17. September 1999 in Rostock. Hrsg. Gerhard Schneider... Praktische Metallographie. Sonderband 31.},
  booktitle = {Fortschritte in der Metallographie. Vortragstexte der 33. Metallographie-Tagung, 15.-17. September 1999 in Rostock. Hrsg. Gerhard Schneider... Praktische Metallographie. Sonderband 31.},
  publisher = {Werkstoff-Informationsgesellschaft},
  address   = {Frankfurt},
  pages     = {97 -- 104},
  year      = {2000},
  language  = {de}
}
@incollection{CresserHaegerLeuchsetal.1982,
  author    = {Cresser, J. D. and H{\"a}ger, J. and Leuchs, G. and Rateike, Franz-Matthias and Walther, H.},
  title     = {Resonance fluorescence of atoms in strong monochromatic laser fields},
  series = {Dissipative systems in quantum optics. Ed. by Rodolfo Bonifacio. Topics in current physics. Vol. 27},
  booktitle = {Dissipative systems in quantum optics. Ed. by Rodolfo Bonifacio. Topics in current physics. Vol. 27},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-642-81719-9},
  doi       = {10.1007/978-3-642-81717-5_3},
  pages     = {21 -- 59},
  year      = {1982},
  abstract  = {The investigation of atomic resonance fluorescence has always been of special interest as a means for the determination of atomic parameters. In addition, information on the interaction mechanism between atoms and radiation can be obtained. In the standard fluorescence experiment the frequency distribution of the incident photons is larger than the natural width of the respective transition; as a consequence the correlation time in the photon-atom interaction is determined by the lifetime of the atoms in the excited state. With the development of lasers and especially of tunable dye lasers in recent years it became possible to study the case where the incident radiation has a spectral distribution which is narrower than the natural width. This corresponds to a correlation time of the incoming light wave which is much longer than the excited-state lifetime. In this chapter a survey of experiments on the resonance fluorescence of atoms in monochromatic laser fields will be given.},
  language  = {en}
}
@incollection{Doeren2008,
  author    = {D{\"o}ren, Horst-Peter},
  title     = {Schweißtechnische Verarbeitung nichtrostender St{\"a}hle},
  series = {Rostfreie St{\"a}hle. Grundwissen, Konstruktions- und Verarbeitungshinweise},
  booktitle = {Rostfreie St{\"a}hle. Grundwissen, Konstruktions- und Verarbeitungshinweise},
  editor    = {G{\"u}mpel, Paul},
  publisher = {Expert Verlag},
  address   = {Renningen},
  isbn      = {978-3-8169-2689-4},
  pages     = {140 -- 174},
  year      = {2008},
  language  = {de}
}
@incollection{Doeren1998,
  author    = {D{\"o}ren, Horst-Peter},
  title     = {Aktuelle Fragen zur Schweißmetallurgie. Neue Werkstoffe und ihre schweißtechnische Verarbeitung = Current questions on welding metallurgy},
  series = {Jahrbuch Schweißtechnik '99},
  booktitle = {Jahrbuch Schweißtechnik '99},
  publisher = {DVS-Verlag},
  address   = {D{\"u}sseldorf},
  isbn      = {3-87155-745-5},
  pages     = {77 -- 85},
  year      = {1998},
  language  = {de}
}
@incollection{Doeren1987,
  author    = {D{\"o}ren, Horst-Peter},
  title     = {Nichtrostende St{\"a}hle},
  series = {Jahrbuch Schweißtechnik. 1988},
  booktitle = {Jahrbuch Schweißtechnik. 1988},
  publisher = {Dt. Verl. f{\"u}r Schweißtechnik (DVS)},
  address   = {D{\"u}sseldorf},
  isbn      = {0935-0292},
  pages     = {188 -- 203},
  year      = {1987},
  language  = {de}
}
@incollection{Doeren1990,
  author    = {D{\"o}ren, Horst-Peter},
  title     = {Das Schweißen von Austenit-Ferrit-Verbindungen},
  series = {Jahrbuch Schweißtechnik. 1991},
  booktitle = {Jahrbuch Schweißtechnik. 1991},
  publisher = {DVS-Verlag},
  address   = {D{\"u}sseldorf},
  isbn      = {3-87155-725-0},
  pages     = {57 -- 63},
  year      = {1990},
  language  = {de}
}
@incollection{DoerenPlaschkaPohl1987,
  author    = {D{\"o}ren, Horst-Peter and Plaschka, K. and Pohl, M.},
  title     = {Die Untersuchung von Schutzgasschweißdr{\"a}hten mit Hilfe des Rasterelektronenmikroskops},
  series = {Fortschritte in der Metallographie. Berichte der 7. Internationalen Metallographie-Tagung Leoben 15. bis 17. Oktober 1986. Sonderb{\"a}nde der Praktischen Metallographie. 18},
  booktitle = {Fortschritte in der Metallographie. Berichte der 7. Internationalen Metallographie-Tagung Leoben 15. bis 17. Oktober 1986. Sonderb{\"a}nde der Praktischen Metallographie. 18},
  publisher = {Riederer},
  address   = {Stuttgart},
  issn      = {0343-3579},
  pages     = {333 -- 345},
  year      = {1987},
  language  = {de}
}
@incollection{DoerenWernicke1985,
  author    = {D{\"o}ren, Horst-Peter and Wernicke, K.},
  title     = {Einfluß der Schweißparameter beim Plasmaauftragschweißen mit Pulvern},
  series = {Schweißen und Schneiden '85 = Welding and Cutting '85. Vortr{\"a}ge der Großen Schweißtechnischen Tagung in Essen vom 11. bis 13. September 1985. Veranst.: Deutscher Verband f{\"u}r Schweißtechnik (DVS). DVS-Berichte. 100},
  booktitle = {Schweißen und Schneiden '85 = Welding and Cutting '85. Vortr{\"a}ge der Großen Schweißtechnischen Tagung in Essen vom 11. bis 13. September 1985. Veranst.: Deutscher Verband f{\"u}r Schweißtechnik (DVS). DVS-Berichte. 100},
  publisher = {Dt. Verl. f{\"u}r Schweißtechnik (DVS)},
  address   = {D{\"u}sseldorf},
  isbn      = {3-87155-405-7},
  pages     = {72 -- 76},
  year      = {1985},
  language  = {de}
}