@article{WolfAltgen2013,
  author    = {Wolf, Martin R. and Altgen, Jannik},
  title     = {IT Service Management in der Region Aachen : White Paper},
  pages     = {1 -- 13},
  year      = {2013},
  language  = {de}
}
@article{FerreinMeyer2012,
  author    = {Ferrein, Alexander and Meyer, Thomas},
  title     = {A Brief Overview of Artificial Intelligence in South Africa},
  series = {AI Magazine},
  volume    = {33},
  journal   = {AI Magazine},
  number    = {1},
  publisher = {AAAI},
  address   = {Menlo Park},
  issn      = {0738-4602},
  doi       = {10.1609/aimag.v33i1.2357},
  pages     = {99 -- 101},
  year      = {2012},
  abstract  = {South Africa in recent years is the establishment of a number of research hubs involved in AI activities ranging from mobile robotics and computational intelligence, to knowledge representation and reasoning, and human language technologies. In this survey we take the reader through a quick tour of the research being conducted at these hubs, and touch on an initiative to maintain and extend the current level of interest in AI research in the country.},
  language  = {en}
}
@article{BragardvanHoekDeDoncker2012,
  author    = {Bragard, Michael and van Hoek, H. and De Doncker, R. W.},
  title     = {A major design step in IETO concept realization that allows overcurrent protection and pushes limits of switching performance},
  series = {IEEE transactions on power electronics},
  volume    = {27},
  journal   = {IEEE transactions on power electronics},
  number    = {9},
  publisher = {IEEE},
  address   = {New York},
  issn      = {0885-8993},
  doi       = {10.1109/TPEL.2012.2189136},
  pages     = {4163 -- 4171},
  year      = {2012},
  abstract  = {This paper presents the latest prototype of the integrated emitter turn-off thyristor concept, which potentially ranks among thyristor high-power devices like the gate turn-off thyristor and the integrated gate-commutated thyristor (IGCT). Due to modifications of the external driver stage and mechanical press-pack design optimization, this prototype allows for full device characterization. The turn-off capability was increased to 1600 A with an active silicon area of 823mm2 . This leads to a transient peak power of 672.1kW/cm² . Within this paper, measurements and concept assessment are presented and a comparison to state-of-the-art IGCT devices is provided.},
  language  = {en}
}
@article{MartinFrauenrathOezerdemetal.2011,
  author    = {Martin, Conrad and Frauenrath, Tobias and {\"O}zerdem, Celal and Renz, Wolfgang and Niendorf, Thoralf},
  title     = {Development and evaluation of a small and mobile Magneto Alert Sensor (MALSE) to support safety requirements for magnetic resonance imaging},
  series = {European Radiology},
  volume    = {21},
  journal   = {European Radiology},
  publisher = {Springer},
  address   = {Berlin, Heidelberg},
  issn      = {1432-1084},
  doi       = {10.1007/s00330-011-2153-z},
  pages     = {2187 -- 2192},
  year      = {2011},
  abstract  = {Objective The purpose of this study is to (i) design a small and mobile Magnetic field ALert SEnsor (MALSE), (ii) to carefully evaluate its sensors to their consistency of activation/deactivation and sensitivity to magnetic fields, and (iii) to demonstrate the applicability of MALSE in 1.5 T, 3.0 T and 7.0 T MR fringe field environments. Methods MALSE comprises a set of reed sensors, which activate in response to their exposure to a magnetic field. The activation/deactivation of reed sensors was examined by moving them in/out of the fringe field generated by 7TMR. Results The consistency with which individual reed sensors would activate at the same field strength was found to be 100\% for the setup used. All of the reed switches investigated required a substantial drop in ambient magnetic field strength before they deactivated. Conclusions MALSE is a simple concept for alerting MRI staff to a ferromagnetic object being brought into fringe magnetic fields which exceeds MALSEs activation magnetic field. MALSE can easily be attached to ferromagnetic objects within the vicinity of a scanner, thus creating a barrier for hazardous situations induced by ferromagnetic parts which should not enter the vicinity of an MR-system to occur.},
  language  = {en}
}
@article{RitzPisarczykSachtlebenetal.2014,
  author    = {Ritz, Thomas and Pisarczyk, Rafael and Sachtleben, Johanna and Leßenich, Nina},
  title     = {Usability Engineering maßgeschneidert : Modellbaukasten zur Entwicklung gebrauchstauglicher mobiler Software},
  series = {Wissenschaft trifft Praxis},
  volume    = {1},
  journal   = {Wissenschaft trifft Praxis},
  number    = {1},
  publisher = {Begleitforschung Mittelstand-Digital c/o WIK-Consult GmbH},
  address   = {Bad Honnef},
  issn      = {2198-8544 (Print)},
  pages     = {79 -- 88},
  year      = {2014},
  language  = {de}
}
@article{WallenbornRitz2014,
  author    = {Wallenborn, Ramona and Ritz, Thomas},
  title     = {Mobilit{\"a}t miteinander teilen : st{\"a}dtisches eCarsharing in einer vernetzten Gesellschaft ; [vernetztes Fahren von morgen]},
  series = {Neue Mobilit{\"a}t : das Magazin vom Bundesverband eMobilit{\"a}t},
  volume    = {5},
  journal   = {Neue Mobilit{\"a}t : das Magazin vom Bundesverband eMobilit{\"a}t},
  number    = {14 (Herbstausg.)},
  publisher = {Bundesverband eMobilit{\"a}t BEM},
  address   = {Berlin},
  issn      = {2191-5636},
  pages     = {92 -- 95},
  year      = {2014},
  language  = {de}
}
@article{SchulteTiggesFoersterNikolovskietal.2022,
  author    = {Schulte-Tigges, Joschua and F{\"o}rster, Marco and Nikolovski, Gjorgji and Reke, Michael and Ferrein, Alexander and Kaszner, Daniel and Matheis, Dominik and Walter, Thomas},
  title     = {Benchmarking of various LiDAR sensors for use in self-driving vehicles in real-world environments},
  series = {Sensors},
  volume    = {22},
  journal   = {Sensors},
  number    = {19},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {1424-8220},
  doi       = {10.3390/s22197146},
  pages     = {20 Seiten},
  year      = {2022},
  abstract  = {Abstract In this paper, we report on our benchmark results of the LiDAR sensors Livox Horizon, Robosense M1, Blickfeld Cube, Blickfeld Cube Range, Velodyne Velarray H800, and Innoviz Pro. The idea was to test the sensors in different typical scenarios that were defined with real-world use cases in mind, in order to find a sensor that meet the requirements of self-driving vehicles. For this, we defined static and dynamic benchmark scenarios. In the static scenarios, both LiDAR and the detection target do not move during the measurement. In dynamic scenarios, the LiDAR sensor was mounted on the vehicle which was driving toward the detection target. We tested all mentioned LiDAR sensors in both scenarios, show the results regarding the detection accuracy of the targets, and discuss their usefulness for deployment in self-driving cars.},
  language  = {en}
}
@article{FrauenrathFuchsDieringeretal.2012,
  author    = {Frauenrath, Tobias and Fuchs, Katharina and Dieringer, Matthias A. and {\"O}zerdem, Celal and Patel, Nishan and Renz, Wolfgang and Greiser, Andreas and Elgeti, Thomas and Niendorf, Thoralf},
  title     = {Detailing the use of magnetohydrodynamic effects for synchronization of MRI with the cardiac cycle: A feasibility study},
  series = {Journal of Magnetic Resonance Imaging},
  volume    = {36},
  journal   = {Journal of Magnetic Resonance Imaging},
  number    = {2},
  publisher = {Wiley-Liss},
  address   = {New York},
  issn      = {1522-2586},
  doi       = {10.1002/jmri.23634},
  pages     = {364 -- 372},
  year      = {2012},
  abstract  = {Purpose: To investigate the feasibility of using magnetohydrodynamic (MHD) effects for synchronization of magnetic resonance imaging (MRI) with the cardiac cycle. Materials and Methods: The MHD effect was scrutinized using a pulsatile flow phantom at B0 = 7.0 T. MHD effects were examined in vivo in healthy volunteers (n = 10) for B0 ranging from 0.05-7.0 T. Noncontrast-enhanced MR angiography (MRA) of the carotids was performed using a gated steady-state free-precession (SSFP) imaging technique in conjunction with electrocardiogram (ECG) and MHD synchronization. Results: The MHD potential correlates with flow velocities derived from phase contrast MRI. MHD voltages depend on the orientation between B0 and the flow of a conductive fluid. An increase in the interelectrode spacing along the flow increases the MHD potential. In vivo measurement of the MHD effect provides peak voltages of 1.5 mV for surface areas close to the common carotid artery at B0 = 7.0 T. Synchronization of MRI with the cardiac cycle using MHD triggering is feasible. MHD triggered MRA of the carotids at 3.0 T showed an overall image quality and richness of anatomic detail, which is comparable to ECG-triggered MRAs. Conclusion: This feasibility study demonstrates the use of MHD effects for synchronization of MR acquisitions with the cardiac cycle. J. Magn. Reson. Imaging 2012;36:364-372. © 2012 Wiley Periodicals, Inc.},
  language  = {en}
}
@article{BragardBragard2012,
  author    = {Bragard, G. and Bragard, Michael},
  title     = {Ein kosteng{\"u}nstiges, universelles Modellbauinterface},
  series = {Der mathematische und naturwissenschaftliche Unterricht : MNU ; Organ des Deutschen Vereins zur F{\"o}rderung des Mathematischen und Naturwissenschaftlichen Unterrichts e.V.},
  volume    = {65},
  journal   = {Der mathematische und naturwissenschaftliche Unterricht : MNU ; Organ des Deutschen Vereins zur F{\"o}rderung des Mathematischen und Naturwissenschaftlichen Unterrichts e.V.},
  number    = {5},
  publisher = {Seeberger},
  address   = {Neuss},
  issn      = {0025-5866},
  pages     = {290 -- 293},
  year      = {2012},
  abstract  = {Wir stellen einen USB-Baustein vor, der eine kosteng{\"u}nstige und universelle M{\"o}glichkeit schafft , im Unterricht den Themenkreis Messen-Steuern-Regeln zu behandeln. Die Funktionalit{\"a}t orientiert sich am CVK-Interface der Firma Fischertechnik. Im Gegensatz zu kommerziellen L{\"o}sungen erlaubt unser Aufbau auch den preiswerten Einsatz in Gruppen- oder Einzelarbeit. Abschließend berichten wir {\"u}ber ein Beispiel aus dem Unterrichtseinsatz.},
  language  = {de}
}
@article{DroopChenRadfordetal.2023,
  author    = {Droop, Philipp and Chen, Shaohuang and Radford, Melissa J. and Paulßen, Elisabeth and Gates, Byron D. and Reilly, Raymond M. and Radchenko, Valery and Hoehr, Cornelia},
  title     = {Synthesis of 197m/gHg labelled gold nanoparticles for targeted radionuclide therapy},
  series = {Radiochimica Acta},
  volume    = {111},
  journal   = {Radiochimica Acta},
  number    = {10},
  publisher = {De Gruyter},
  address   = {Berlin [u.a.]},
  issn      = {2193-3405},
  doi       = {10.1515/ract-2023-0144},
  pages     = {773 -- 779},
  year      = {2023},
  abstract  = {Meitner-Auger-electron emitters have a promising potential for targeted radionuclide therapy of cancer because of their short range and the high linear energy transfer of Meitner-Auger-electrons (MAE). One promising MAE candidate is 197m/gHg with its half-life of 23.8 h and 64.1 h, respectively, and high MAE yield. Gold nanoparticles (AuNPs) that are labelled with 197m/gHg could be a helpful tool for radiation treatment of glioblastoma multiforme when infused into the surgical cavity after resection to prevent recurrence. To produce such AuNPs, 197m/gHg was embedded into pristine AuNPs. Two different syntheses were tested starting from irradiated gold containing trace amounts of 197m/gHg. When sodium citrate was used as reducing agent, no 197m/gHg labelled AuNPs were formed, but with tannic acid, 197m/gHg labeled AuNPs were produced. The method was optimized by neutralizing the pH (pH = 7) of the Au/197m/gHg solution, which led to labelled AuNPs with a size of 12.3 ± 2.0 nm as measured by transmission electron microscopy. The labelled AuNPs had a concentration of 50 μg (gold)/mL with an activity of 151 ± 93 kBq/mL (197gHg, time corrected to the end of bombardment).},
  language  = {en}
}