@inproceedings{BrandesGligorevicSchnelletal.2007,
  author    = {Brandes, Sinja and Gligorevic, Snjezana and Schnell, Michael and Rokitansky, Carl-Herbert and Ehammer, Max and Gr{\"a}upl, Thomas and Schlereth, Armin and Rihacek, Christoph},
  title     = {Final assessment of the B-VHF overlay concept},
  series = {IEEE Aerospace Conference : 3-10 March 2007, Big Sky, Mont.},
  booktitle = {IEEE Aerospace Conference : 3-10 March 2007, Big Sky, Mont.},
  organization    = {Institute of Electrical and Electronics Engineers},
  isbn      = {1-4244-0525-4},
  pages     = {1 -- 18},
  year      = {2007},
  language  = {en}
}
@article{MaasVosLagemaatetal.2014,
  author    = {Maas, Marnix C. and Vos, Eline K. and Lagemaat, Miriam W. and Bitz, Andreas and Orzada, Stephan and Kobus, Thiele and Kraff, Oliver and Maderwald, Stefan and Ladd, Mark E. and Scheenen, Tom W. J.},
  title     = {Feasibility of T₂-weighted turbo spin echo imaging of the human prostate at 7 tesla},
  series = {Magnetic Resonance in Medicine},
  volume    = {71},
  journal   = {Magnetic Resonance in Medicine},
  number    = {5},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1522-2594},
  doi       = {10.1002/mrm.24818},
  pages     = {1711 -- 1719},
  year      = {2014},
  abstract  = {Purpose To demonstrate that high quality T₂-weighted (T2w) turbo spin-echo (TSE) imaging of the complete prostate can be achieved routinely and within safety limits at 7 T, using an external transceive body array coil only. Methods Nine healthy volunteers and 12 prostate cancer patients were scanned on a 7 T whole-body system. Preparation consisted of B₀ and radiofrequency shimming and localized flip angle calibration. T₁ and T₂ relaxation times were measured and used to define the T2w-TSE protocol. T2w imaging was performed using a TSE sequence (pulse repetition time/echo time 3000-3640/71 ms) with prolonged excitation and refocusing pulses to reduce specific absorption rate. Results High quality T2w TSE imaging was performed in less than 2 min in all subjects. Tumors of patients with gold-standard tumor localization (MR-guided biopsy or prostatectomy) were well visualized on 7 T imaging (n = 3). The number of consecutive slices achievable within a 10-g averaged specific absorption rate limit of 10 W/kg was ≥28 in all subjects, sufficient for full prostate coverage with 3-mm slices in at least one direction. Conclusion High quality T2w TSE prostate imaging can be performed routinely and within specific absorption rate limits at 7 T with an external transceive body array.},
  language  = {en}
}
@article{KrauseRodriguezStopicetal.2007,
  author    = {Krause, Gregor and Rodriguez, Jackson and Stopic, Srecko and Friedrich, Bernd},
  title     = {Feasibility assessment of electrocoagulation towards a new sustainable wastewater treatment / Rodriguez, Jackson ; Stopic, Srecko ; Krause Gregor ; Friedrich, Bernd},
  series = {Environmental Science and Pollution Research. 14 (2007), H. 7},
  journal   = {Environmental Science and Pollution Research. 14 (2007), H. 7},
  isbn      = {0944-1344},
  pages     = {477 -- 482},
  year      = {2007},
  language  = {en}
}
@inproceedings{NiemuellerReuterFerrein2016,
  author    = {Niemueller, Tim and Reuter, Sebastian and Ferrein, Alexander},
  title     = {Fawkes for the RoboCup Logistics League},
  series = {RoboCup 2015: Robot World Cup XIX},
  booktitle = {RoboCup 2015: Robot World Cup XIX},
  editor    = {Almeida, Luis},
  publisher = {Springer International Publishing},
  address   = {Cham},
  isbn      = {978-3-319-29339-4},
  doi       = {10.1007/978-3-319-29339-4_31},
  pages     = {365 -- 373},
  year      = {2016},
  language  = {en}
}
@article{OssmannHattrupBroeck2003,
  author    = {Oßmann, Martin and Hattrup, C. and Broeck, H. W. van der},
  title     = {Fast estimation techniques for digital control of resonant converters / Hattrup, C.; van der Broeck, H.W.; Ossmann, M.;},
  series = {IEEE Transaction on Power Electronics. 18 (2003), H. 1},
  journal   = {IEEE Transaction on Power Electronics. 18 (2003), H. 1},
  isbn      = {0885-8993},
  pages     = {365 -- 372},
  year      = {2003},
  language  = {en}
}
@article{PrumeMuraltCalameetal.2007,
  author    = {Prume, Klaus and Muralt, Paul and Calame, Florian and Schmitz-Kempen, Thorsten},
  title     = {Extensive electromechanical characterization of PZT thin films for MEMS applications by electrical and mechanical excitation signals / Prume, Klaus ; Muralt, Paul ; Calame, Florian ; Schmitz-Kempen, Thorsten ; Tiedke, Stephan},
  series = {Journal of Electroceramics. 19 (2007), H. 4},
  journal   = {Journal of Electroceramics. 19 (2007), H. 4},
  isbn      = {1385-3449},
  pages     = {407 -- 411},
  year      = {2007},
  language  = {en}
}
@article{FerreinFritzLakemeyer2003,
  author    = {Ferrein, Alexander and Fritz, Christian and Lakemeyer, Gerhard},
  title     = {Extending DTGOLOG with Options / Ferrein, Alexander ; Fritz, Christian ; Lakemeyer, Gerhard},
  series = {IJCAI-03, Proceedings of the Eighteenth International Joint Conference on Artificial Intelligence, Acapulco, Mexico, August 9-15, 2003},
  journal   = {IJCAI-03, Proceedings of the Eighteenth International Joint Conference on Artificial Intelligence, Acapulco, Mexico, August 9-15, 2003},
  pages     = {1391 -- 1393},
  year      = {2003},
  language  = {en}
}
@article{SchlamannVoigtMaderwaldetal.2010,
  author    = {Schlamann, Marc and Voigt, Melanie A. and Maderwald, Stefan and Bitz, Andreas and Kraff, Oliver and Ladd, Susanne C. and Ladd, Mark E. and Forsting, Michael and Wilhelm, Hans},
  title     = {Exposure to high-field MRI does not affect cognitive function},
  series = {Journal of Magnetic Resonance Imaging},
  volume    = {31},
  journal   = {Journal of Magnetic Resonance Imaging},
  number    = {5},
  publisher = {Wiley-Liss},
  address   = {New York},
  issn      = {1522-2586},
  doi       = {10.1002/jmri.22065},
  pages     = {1061 -- 1066},
  year      = {2010},
  abstract  = {Purpose To assess potential cognitive deficits under the influence of static magnetic fields at various field strengths some studies already exist. These studies were not focused on attention as the most vulnerable cognitive function. Additionally, mostly no magnetic resonance imaging (MRI) sequences were performed. Materials and Methods In all, 25 right-handed men were enrolled in this study. All subjects underwent one MRI examination of 63 minutes at 1.5 T and one at 7 T within an interval of 10 to 30 days. The order of the examinations was randomized. Subjects were referred to six standardized neuropsychological tests strictly focused on attention immediately before and after each MRI examination. Differences in neuropsychological variables between the timepoints before and after each MRI examination were assessed and P-values were calculated Results Only six subtests revealed significant differences between pre- and post-MRI. In these tests the subjects achieved better results in post-MRI testing than in pre-MRI testing (P = 0.013-0.032). The other tests revealed no significant results. Conclusion The improvement in post-MRI testing is only explicable as a result of learning effects. MRI examinations, even in ultrahigh-field scanners, do not seem to have any persisting influence on the attention networks of human cognition immediately after exposure.},
  language  = {en}
}
@article{ReinhardtBitzElOuardietal.2007,
  author    = {Reinhardt, T. and Bitz, Andreas and El Ouardi, A. and Streckert, J. and Sommer, A. and Lerchl, A. and Hansen, V.},
  title     = {Exposure set-ups for in vivo experiments using radial waveguides},
  series = {Radiation Protection Dosimetry},
  volume    = {124},
  journal   = {Radiation Protection Dosimetry},
  number    = {1},
  issn      = {1742-3406},
  doi       = {10.1093/rpd/ncm370},
  pages     = {21 -- 26},
  year      = {2007},
  language  = {en}
}
@article{Siepmann1999,
  author    = {Siepmann, Thomas},
  title     = {Exploitation Plan of the TELEflow Project},
  address   = {Brussels},
  year      = {1999},
  language  = {en}
}
@article{AltherrEdererLorenzetal.2014,
  author    = {Altherr, Lena and Ederer, Thorsten and Lorenz, Ulf and Pelz, Peter F. and P{\"o}ttgen, Philipp},
  title     = {Experimental validation of an enhanced system synthesis approach},
  series = {Operations Research Proceedings 2014},
  journal   = {Operations Research Proceedings 2014},
  editor    = {L{\"u}bbecke, Marco and Koster, Arie and Letmathe, Peter and Madlener, Reihard and Peis, Britta and Walther, Grit},
  publisher = {Springer},
  address   = {Basel},
  isbn      = {978-3-319-28695-2},
  doi       = {10.1007/978-3-319-28697-6_1},
  pages     = {6},
  year      = {2014},
  abstract  = {Planning the layout and operation of a technical system is a common task for an engineer. Typically, the workflow is divided into consecutive stages: First, the engineer designs the layout of the system, with the help of his experience or of heuristic methods. Secondly, he finds a control strategy which is often optimized by simulation. This usually results in a good operating of an unquestioned sys- tem topology. In contrast, we apply Operations Research (OR) methods to find a cost-optimal solution for both stages simultaneously via mixed integer program- ming (MILP). Technical Operations Research (TOR) allows one to find a provable global optimal solution within the model formulation. However, the modeling error due to the abstraction of physical reality remains unknown. We address this ubiq- uitous problem of OR methods by comparing our computational results with mea- surements in a test rig. For a practical test case we compute a topology and control strategy via MILP and verify that the objectives are met up to a deviation of 8.7\%.},
  language  = {en}
}
@incollection{LeiseAltherr2021,
  author    = {Leise, Philipp and Altherr, Lena},
  title     = {Experimental evaluation of resilience metrics in a fluid system},
  series = {Mastering Uncertainty in Mechanical Engineering},
  booktitle = {Mastering Uncertainty in Mechanical Engineering},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-78356-3},
  pages     = {442 -- 447},
  year      = {2021},
  language  = {en}
}
@inproceedings{BitzKlompLadd2009,
  author    = {Bitz, Andreas and Klomp, D.W. and Ladd, M.E.},
  title     = {Experimental and numerical determination of SAR and temperature distribution of a human endorectal coil for MR imaging of the prostate at 7T (903.)},
  series = {16th annual ISMRM scientific meeting and exhibition 2008 : Toronto, Ontario, Canada, 3 - 9 May 2008},
  booktitle = {16th annual ISMRM scientific meeting and exhibition 2008 : Toronto, Ontario, Canada, 3 - 9 May 2008},
  publisher = {Curran},
  address   = {Red Hook, NY},
  isbn      = {978-1-61567-196-0},
  year      = {2009},
  language  = {en}
}
@inproceedings{BitzKraffOrzadaetal.2010,
  author    = {Bitz, Andreas and Kraff, O. and Orzada, S. and Maderwald, S. and Brote, I. and Ladd, M.},
  title     = {Experimental and Numerical Assessment of RF Safety of Transmit Coils at 7 Tesla},
  series = {ISMRM workshop on MR safety 2010 : RF heating of the human in MRI : workshop series. The Washington County Historic Courthouse, Stillwater, Minnesota, USA, 15 - 17 October 2010},
  booktitle = {ISMRM workshop on MR safety 2010 : RF heating of the human in MRI : workshop series. The Washington County Historic Courthouse, Stillwater, Minnesota, USA, 15 - 17 October 2010},
  isbn      = {978-1-62276-088-6},
  pages     = {195},
  year      = {2010},
  language  = {en}
}
@article{NoureddineBitzLaddetal.2015,
  author    = {Noureddine, Yacine and Bitz, Andreas and Ladd, Mark E. and Th{\"u}rling, Markus and Ladd, Susanne C. and Schaefers, Gregor and Kraff, Oliver},
  title     = {Experience with magnetic resonance imaging of human subjects with passive implants and tattoos at 7 T: a retrospective study},
  series = {Magnetic Resonance Materials in Physics, Biology and Medicine},
  volume    = {28},
  journal   = {Magnetic Resonance Materials in Physics, Biology and Medicine},
  number    = {6},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1352-8661},
  doi       = {10.1007/s10334-015-0499-y},
  pages     = {577 -- 590},
  year      = {2015},
  language  = {en}
}
@article{PoettgenEdererAltherretal.2015,
  author    = {P{\"o}ttgen, Philipp and Ederer, Thorsten and Altherr, Lena and Lorenz, Ulf and Pelz, Peter F.},
  title     = {Examination and optimization of a heating circuit for energy-efficient buildings},
  series = {Energy Technology},
  volume    = {4},
  journal   = {Energy Technology},
  number    = {1},
  publisher = {WILEY-VCH Verlag},
  address   = {Weinheim},
  isbn      = {2194-4296},
  doi       = {10.1002/ente.201500252},
  pages     = {136 -- 144},
  year      = {2015},
  abstract  = {The conference center darmstadtium in Darmstadt is a prominent example of energy efficient buildings. Its heating system consists of different source and consumer circuits connected by a Zortstr{\"o}m reservoir. Our goal was to reduce the energy costs of the system as much as possible. Therefore, we analyzed its supply circuits. The first step towards optimization is a complete examination of the system: 1) Compilation of an object list for the system, 2) collection of the characteristic curves of the components, and 3) measurement of the load profiles of the heat and volume-flow demand. Instead of modifying the system manually and testing the solution by simulation, the second step was the creation of a global optimization program. The objective was to minimize the total energy costs for one year. We compare two different topologies and show opportunities for significant savings.},
  language  = {en}
}
@inproceedings{NiemuellerReuterFerreinetal.2016,
  author    = {Niemueller, Tim and Reuter, Sebastian and Ferrein, Alexander and Jeschke, Sabina and Lakemeyer, Gerhard},
  title     = {Evaluation of the RoboCup Logistics League and Derived Criteria for Future Competitions},
  series = {RoboCup 2015: Robot World Cup XIX},
  booktitle = {RoboCup 2015: Robot World Cup XIX},
  editor    = {Almeida, Luis},
  publisher = {Springer International Publishing},
  address   = {Cham},
  isbn      = {978-3-319-29339-4},
  doi       = {10.1007/978-3-319-29339-4_3},
  pages     = {31 -- 43},
  year      = {2016},
  language  = {en}
}
@article{LeingartnerMaurerFerreinetal.2016,
  author    = {Leingartner, Max and Maurer, Johannes and Ferrein, Alexander and Steinbauer, Gerald},
  title     = {Evaluation of Sensors and Mapping Approaches for Disasters in Tunnels},
  series = {Journal of Field Robotics},
  volume    = {33},
  journal   = {Journal of Field Robotics},
  number    = {8},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1556-4967},
  doi       = {10.1002/rob.21611},
  pages     = {1037 -- 1057},
  year      = {2016},
  abstract  = {Ground or aerial robots equipped with advanced sensing technologies, such as three-dimensional laser scanners and advanced mapping algorithms, are deemed useful as a supporting technology for first responders. A great deal of excellent research in the field exists, but practical applications at real disaster sites are scarce. Many projects concentrate on equipping robots with advanced capabilities, such as autonomous exploration or object manipulation. In spite of this, realistic application areas for such robots are limited to teleoperated reconnaissance or search. In this paper, we investigate how well state-of-the-art and off-the-shelf components and algorithms are suited for reconnaissance in current disaster-relief scenarios. The basic idea is to make use of some of the most common sensors and deploy some widely used algorithms in a disaster situation, and to evaluate how well the components work for these scenarios. We acquired the sensor data from two field experiments, one from a disaster-relief operation in a motorway tunnel, and one from a mapping experiment in a partly closed down motorway tunnel. Based on these data, which we make publicly available, we evaluate state-of-the-art and off-the-shelf mapping approaches. In our analysis, we integrate opinions and replies from first responders as well as from some algorithm developers on the usefulness of the data and the limitations of the deployed approaches, respectively. We discuss the lessons we learned during the two missions. These lessons are interesting for the community working in similar areas of urban search and rescue, particularly reconnaissance and search.},
  language  = {en}
}
@inproceedings{LeingartnerMaurerSteinbaueretal.2013,
  author    = {Leingartner, Max and Maurer, Johannes and Steinbauer, Gerald and Ferrein, Alexander},
  title     = {Evaluation of sensors and mapping approaches for disasters in tunnels},
  series = {IEEE International Symposium on Safety, Security, and Rescue Robotics : SSRR : 21-26 Oct. 2013, Linkoping, Sweden},
  booktitle = {IEEE International Symposium on Safety, Security, and Rescue Robotics : SSRR : 21-26 Oct. 2013, Linkoping, Sweden},
  organization    = {Institute of Electrical and Electronics Engineers},
  isbn      = {978-1-4799-0879-0},
  pages     = {1 -- 7},
  year      = {2013},
  language  = {en}
}
@inproceedings{StopforthFerreinSteinbauer2015,
  author    = {Stopforth, Riaan and Ferrein, Alexander and Steinbauer, Gerald},
  title     = {Europe and South African collaboration on the Mechatronics and Robotics systems as part of the SA Robotics Center},
  series = {ICRA 2015 Developing Countries Forum},
  booktitle = {ICRA 2015 Developing Countries Forum},
  pages     = {3 S.},
  year      = {2015},
  abstract  = {Mechatronics consist of the integration of mechanical engineering, electronic integration and computer science/ engineering. These broad fields are essential for robotic systems, yet it makes it difficult for the researchers to specialize and be experts in all these fields. Collaboration between researchers allow for the integration of experience and specialization, to allow optimized systems. Collaboration between the European countries and South Africa is critical, as each country has different resources available, which the other countries might not have. Applications with the need for approval of any restrictions, can also be obtained easier in some countries compared to others, thus preventing the delays of research. Some problems that have been experienced are discussed, with the Robotics Center of South Africa as a possible solution.},
  language  = {en}
}
@inproceedings{UsaiCorucciGligorevicetal.2011,
  author    = {Usai, Pierpaolo and Corucci, Alessandro and Gligorevic, Snjezana and Monorchio, Agostino},
  title     = {Estimation of airport surface propagation channel: ray tracing model and measurements},
  series = {Proceedings of the 5th European Conference on Antennas and Propagation (EUCAP) : 11 - 15 April 2011, Rome, Italy},
  booktitle = {Proceedings of the 5th European Conference on Antennas and Propagation (EUCAP) : 11 - 15 April 2011, Rome, Italy},
  organization    = {European Association on Antennas and Propagation},
  isbn      = {978-1-4577-0250-1},
  pages     = {1634 -- 1638},
  year      = {2011},
  language  = {en}
}
@incollection{Czarnecki2018,
  author    = {Czarnecki, Christian},
  title     = {Establishment of a central process governance organization combined with operational process improvements : Insights from a BPM Project at a leading telecommunications operator in the Middle East},
  series = {Business process management cases : digital innovation and business transformation in practice},
  booktitle = {Business process management cases : digital innovation and business transformation in practice},
  editor    = {vom Brocke, Jan and Mendling, Jan},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-319-58306-8},
  doi       = {10.1007/978-3-319-58307-5},
  pages     = {57 -- 76},
  year      = {2018},
  abstract  = {Because of customer churn, strong competition, and operational inefficiencies, the telecommunications operator ME Telco (fictitious name due to confidentiality) launched a strategic transformation program that included a Business Process Management (BPM) project. Major problems were silo-oriented process management and missing cross-functional transparency. Process improvements were not consistently planned and aligned with corporate targets. Measurable inefficiencies were observed on an operational level, e.g., high lead times and reassignment rates of the incident management process.},
  language  = {en}
}
@article{FerreinSteinbauerMcPhillipsetal.2007,
  author    = {Ferrein, Alexander and Steinbauer, Gerald and McPhillips, Graeme and Potgieter, Anet},
  title     = {Establishing the RoboCup Standard League in Africa - applying for the RoboCup Standard League with a German-Austrian-South African Research Project},
  pages     = {1 -- 5},
  year      = {2007},
  language  = {en}
}
@article{HeuermannSchiek1995,
  author    = {Heuermann, Holger and Schiek, B.},
  title     = {Error corrected impedance measurements with a network analyzer},
  series = {IEEE transactions on instrumentation and measurement : IM / Institute of Electrical and Electronics Engineers, Instrumentation and Measurement Group. 44 (1995), H. 2},
  journal   = {IEEE transactions on instrumentation and measurement : IM / Institute of Electrical and Electronics Engineers, Instrumentation and Measurement Group. 44 (1995), H. 2},
  isbn      = {0018-9456},
  pages     = {295 -- 299},
  year      = {1995},
  language  = {en}
}
@article{HeuermannSchiek1994,
  author    = {Heuermann, Holger and Schiek, Burkhard},
  title     = {Error Corrected Impedance Measurements with a Network Analyzer},
  pages     = {125 -- 126},
  year      = {1994},
  language  = {en}
}
@article{SchifferFerrein2018,
  author    = {Schiffer, Stefan and Ferrein, Alexander},
  title     = {ERIKA—Early Robotics Introduction at Kindergarten Age},
  series = {Multimodal Technologies Interact},
  volume    = {2},
  journal   = {Multimodal Technologies Interact},
  number    = {4},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {2414-4088},
  doi       = {10.3390/mti2040064},
  pages     = {15},
  year      = {2018},
  abstract  = {In this work, we report on our attempt to design and implement an early introduction to basic robotics principles for children at kindergarten age. One of the main challenges of this effort is to explain complex robotics contents in a way that pre-school children could follow the basic principles and ideas using examples from their world of experience. What sets apart our effort from other work is that part of the lecturing is actually done by a robot itself and that a quiz at the end of the lesson is done using robots as well. The humanoid robot Pepper from Softbank, which is a great platform for human-robot interaction experiments, was used to present a lecture on robotics by reading out the contents to the children making use of its speech synthesis capability. A quiz in a Runaround-game-show style after the lecture activated the children to recap the contents they acquired about how mobile robots work in principle. In this quiz, two LEGO Mindstorm EV3 robots were used to implement a strongly interactive scenario. Besides the thrill of being exposed to a mobile robot that would also react to the children, they were very excited and at the same time very concentrated. We got very positive feedback from the children as well as from their educators. To the best of our knowledge, this is one of only few attempts to use a robot like Pepper not as a tele-teaching tool, but as the teacher itself in order to engage pre-school children with complex robotics contents.},
  language  = {en}
}
@inproceedings{GligorevicBottSorger2004,
  author    = {Gligorevic, Snjezana and Bott, Rainer and Sorger, Ulrich},
  title     = {Equalization for multi-carrier systems in time-varying channels},
  series = {Multi-carrier spread-spectrum for future generation wireless systems : fourth international workshop, Germany, September 17-19, 2003},
  booktitle = {Multi-carrier spread-spectrum for future generation wireless systems : fourth international workshop, Germany, September 17-19, 2003},
  editor    = {Fazel, Khaled},
  isbn      = {1402018371},
  pages     = {251 -- 258},
  year      = {2004},
  language  = {en}
}
@article{Huening2008,
  author    = {H{\"u}ning, Felix},
  title     = {Entwicklungstrends bei MOSFETs f{\"u}r den Automobilbereich},
  series = {Elektronik-Industrie . 39 (2008), H. 5},
  journal   = {Elektronik-Industrie . 39 (2008), H. 5},
  publisher = {-},
  isbn      = {0174-5522},
  pages     = {74 -- 76},
  year      = {2008},
  language  = {en}
}
@inproceedings{BrockmannSultanowCzarnecki2018,
  author    = {Brockmann, Carsten and Sultanow, Eldar and Czarnecki, Christian},
  title     = {Enterprise architectures between agility and traditional methodologies},
  series = {GI Edition Proceedings Band 285 Workshops der INFORMATIK 2018},
  booktitle = {GI Edition Proceedings Band 285 Workshops der INFORMATIK 2018},
  editor    = {Czarnecki, Christian and Brockmann, Carsten and Sultanow, Eldar and Koschmider, Agnes and Selzer, Annika and Gesellschaft f{\"u}r Informatik e. V.,},
  publisher = {K{\"o}llen},
  address   = {Bonn},
  isbn      = {9783885796794},
  issn      = {1617-5468},
  pages     = {1 Seite},
  year      = {2018},
  abstract  = {For this year's workshop on Enterpirse Architecture in Research and Practice we have received eight submissions from which four have passed the rigorous peer-review. The acceptance quote of 50\% assures that only advancements in the field are included in our workshop.},
  language  = {en}
}
@inproceedings{HofmannMatareNeumannetal.2018,
  author    = {Hofmann, Till and Matar{\´e}, Victor and Neumann, Tobias and Sch{\"o}nitz, Sebastian and Henke, Christoph and Limpert, Nicolas and Niemueller, Tim and Ferrein, Alexander and Jeschke, Sabina and Lakemeyer, Gerhard},
  title     = {Enhancing Software and Hardware Reliability for a Successful Participation in the RoboCup Logistics League 2017},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-00308-1},
  doi       = {10.1007/978-3-030-00308-1_40},
  pages     = {486 -- 497},
  year      = {2018},
  language  = {en}
}
@article{HeuermannSadeghfam2009,
  author    = {Heuermann, Holger and Sadeghfam, Arash},
  title     = {Enhanced system architecture for rugged wide band data transmission / Sadeghfam, A. ; Heuermann, H.},
  series = {European Radar Conference, 2009 : EuRAD 2009 ; Sept. 30 - Oct. 2 2009, Rome, Italy ; part of the European Microwave Week (EuMW) / sponsored by EuMA, European Microwave Association},
  journal   = {European Radar Conference, 2009 : EuRAD 2009 ; Sept. 30 - Oct. 2 2009, Rome, Italy ; part of the European Microwave Week (EuMW) / sponsored by EuMA, European Microwave Association},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  isbn      = {978-2-87487-014-9},
  pages     = {347 -- 350},
  year      = {2009},
  language  = {en}
}
@article{SchmidtForkmannSchultzetal.2019,
  author    = {Schmidt, Katharina and Forkmann, Katarina and Schultz, Heidrun and Gratz, Marcel and Bitz, Andreas and Wiech, Katja and Bingel, Ulrike},
  title     = {Enhanced Neural Reinstatement for Evoked Facial Pain Compared With Evoked Hand Pain},
  series = {The Journal of Pain},
  journal   = {The Journal of Pain},
  number    = {In Press, Corrected Proof},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1526-5900},
  doi       = {10.1016/j.jpain.2019.03.003},
  year      = {2019},
  language  = {en}
}
@incollection{LeiseAltherrPelz2018,
  author    = {Leise, Philipp and Altherr, Lena and Pelz, Peter F.},
  title     = {Energy-Efficient design of a water supply system for skyscrapers by mixed-integer nonlinear programming},
  series = {Operations Research Proceedings 2017},
  booktitle = {Operations Research Proceedings 2017},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-319-89919-0},
  doi       = {10.1007/978-3-319-89920-6_63},
  year      = {2018},
  abstract  = {The energy-efficiency of technical systems can be improved by a systematic design approach. Technical Operations Research (TOR) employs methods known from Operations Research to find a global optimal layout and operation strategy of technical systems. We show the practical usage of this approach by the systematic design of a decentralized water supply system for skyscrapers. All possible network options and operation strategies are modeled by a Mixed-Integer Nonlinear Program. We present the optimal system found by our approach and highlight the energy savings compared to a conventional system design.},
  language  = {en}
}
@article{WiegnerVolkerMainzetal.2023,
  author    = {Wiegner, Jonas and Volker, Hanno and Mainz, Fabian and Backes, Andreas and Loeken, Michael and H{\"u}ning, Felix},
  title     = {Energy analysis of a wireless sensor node powered by a Wiegand sensor},
  series = {Journal of Sensors and Sensor Systems (JSSS)},
  volume    = {12},
  journal   = {Journal of Sensors and Sensor Systems (JSSS)},
  number    = {1},
  publisher = {Copernicus Publ.},
  address   = {G{\"o}ttingen},
  issn      = {2194-878X},
  doi       = {10.5194/jsss-12-85-2023},
  pages     = {85 -- 92},
  year      = {2023},
  abstract  = {This article describes an Internet of things (IoT) sensing device with a wireless interface which is powered by the energy-harvesting method of the Wiegand effect. The Wiegand effect, in contrast to continuous sources like photovoltaic or thermal harvesters, provides small amounts of energy discontinuously in pulsed mode. To enable an energy-self-sufficient operation of the sensing device with this pulsed energy source, the output energy of the Wiegand generator is maximized. This energy is used to power up the system and to acquire and process data like position, temperature or other resistively measurable quantities as well as transmit these data via an ultra-low-power ultra-wideband (UWB) data transmitter. A proof-of-concept system was built to prove the feasibility of the approach. The energy consumption of the system during start-up was analysed, traced back in detail to the individual components, compared to the generated energy and processed to identify further optimization options. Based on the proof of concept, an application prototype was developed.},
  language  = {en}
}
@book{WosnitzaHilgers2012,
  author    = {Wosnitza, Franz and Hilgers, Hans Gerd},
  title     = {Energieeffizienz und Energiemanagement : ein {\"U}berblick heutiger M{\"o}glichkeiten und Notwendigkeiten},
  publisher = {Springer Spektrum},
  address   = {Wiesbaden},
  isbn      = {978-3-8348-1941-3},
  pages     = {XVII, 548 S. : Ill., graph. Darst.},
  year      = {2012},
  language  = {en}
}
@incollection{SchmitzDietzeCzarnecki2019,
  author    = {Schmitz, Manfred and Dietze, Christian and Czarnecki, Christian},
  title     = {Enabling digital transformation through robotic process automation at Deutsche Telekom},
  series = {Enabling digital transformation through robotic process automation at Deutsche Telekom},
  booktitle = {Enabling digital transformation through robotic process automation at Deutsche Telekom},
  editor    = {Urbach, Nils and R{\"o}glinger, Maximilian},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-319-95272-7},
  doi       = {10.1007/978-3-319-95273-4_2},
  pages     = {15 -- 33},
  year      = {2019},
  abstract  = {Due to the high number of customer contacts, fault clearances, installations, and product provisioning per year, the automation level of operational processes has a significant impact on financial results, quality, and customer experience. Therefore, the telecommunications operator Deutsche Telekom (DT) has defined a digital strategy with the objectives of zero complexity and zero complaint, one touch, agility in service, and disruptive thinking. In this context, Robotic Process Automation (RPA) was identified as an enabling technology to formulate and realize DT's digital strategy through automation of rule-based, routine, and predictable tasks in combination with structured and stable data.},
  language  = {en}
}
@incollection{CzarneckiHongSchmitzetal.2021,
  author    = {Czarnecki, Christian and Hong, Chin-Gi and Schmitz, Manfred and Dietze, Christian},
  title     = {Enabling digital transformation through cognitive robotic process automation at Deutsche Telekom Services Europe},
  series = {Digitalization Cases Vol. 2 : Mastering digital transformation for global business},
  booktitle = {Digitalization Cases Vol. 2 : Mastering digital transformation for global business},
  editor    = {Urbach, Nils and R{\"o}glinger, Maximilian and Kautz, Karlheinz and Alias, Rose Alinda and Saunders, Carol and Wiener, Martin},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-80002-4 (Print)},
  doi       = {10.1007/978-3-030-80003-1},
  pages     = {123 -- 138},
  year      = {2021},
  abstract  = {Subject of this case is Deutsche Telekom Services Europe (DTSE), a service center for administrative processes. Due to the high volume of repetitive tasks (e.g., 100k manual uploads of offer documents into SAP per year), automation was identified as an important strategic target with a high management attention and commitment. DTSE has to work with various backend application systems without any possibility to change those systems. Furthermore, the complexity of administrative processes differed. When it comes to the transfer of unstructured data (e.g., offer documents) to structured data (e.g., MS Excel files), further cognitive technologies were needed.},
  language  = {en}
}
@article{WolfFoltzSchlicketal.2000,
  author    = {Wolf, Martin R. and Foltz, Christian and Schlick, Christopher and Luczak, Holger},
  title     = {Empirical Investigation of a workspace model for Chemical engineers / Wolf, Martin ; Foltz, Christian ; Schlick, Christopher ; Luczak, Holger},
  series = {Proceedings of the Human Factors and Ergonomics Society Annual Meeting July 2000. 44 (2000), H. 6},
  journal   = {Proceedings of the Human Factors and Ergonomics Society Annual Meeting July 2000. 44 (2000), H. 6},
  publisher = {-},
  pages     = {612 -- 615},
  year      = {2000},
  language  = {en}
}
@article{FerreinSchifferLakemeyer2009,
  author    = {Ferrein, Alexander and Schiffer, Stefan and Lakemeyer, Gerhard},
  title     = {Embedding fuzzy controllers in golog / Ferrein, Alexander ; Schiffer, Stefan ; Lakemeyer, Gerhard},
  series = {IEEE International Conference on Fuzzy Systems, 2009. FUZZ-IEEE 2009},
  journal   = {IEEE International Conference on Fuzzy Systems, 2009. FUZZ-IEEE 2009},
  publisher = {IEEE},
  address   = {New York},
  isbn      = {978-1-4244-3596-8},
  pages     = {894 -- 899},
  year      = {2009},
  language  = {en}
}
@book{Huening2018,
  author    = {H{\"u}ning, Felix},
  title     = {Embedded Design For IoT With Renesas Synergy},
  publisher = {Renesas Electronics},
  address   = {D{\"u}sseldorf},
  pages     = {143 S.},
  year      = {2018},
  language  = {en}
}
@article{JensKaldenhoffKirschnerHermannsetal.2014,
  author    = {Jens, Otto and Kaldenhoff, E. and Kirschner-Hermanns, R. and M{\"u}hl, Thomas and Klinge, Uwe},
  title     = {Elongation of textile pelvic floor implants under load is related to complete loss of effective porosity, thereby favoring incorporation in scar plates},
  series = {Journal of biomedical materials research. Part A},
  volume    = {102},
  journal   = {Journal of biomedical materials research. Part A},
  number    = {4},
  publisher = {Wiley},
  address   = {New York},
  issn      = {1552-4965},
  doi       = {10.1002/jbm.a.34767},
  pages     = {1079 -- 1084},
  year      = {2014},
  abstract  = {Use of textile structures for reinforcement of pelvic floor structures has to consider mechanical forces to the implant, which are quite different to the tension free conditions of the abdominal wall. Thus, biomechanical analysis of textile devices has to include the impact of strain on stretchability and effective porosity. Prolift® and Prolift + M®, developed for tension free conditions, were tested by measuring stretchability and effective porosity applying mechanical strain. For comparison, we used Dynamesh-PR4®, which was designed for pelvic floor repair to withstand mechanical strain. Prolift® at rest showed moderate porosity with little stretchability but complete loss of effective porosity at strain of 4.9 N/cm. Prolift + M® revealed an increased porosity at rest, but at strain showed high stretchability, with subsequent loss of effective porosity at strain of 2.5 N/cm. Dynamesh PR4® preserved its high porosity even under strain, but as consequence of limited stretchability. Though in tension free conditions Prolift® and Prolift + M® can be considered as large pore class I meshes, application of mechanical strain rapidly lead to collapse of pores. The loss of porosity at mechanical stress can be prevented by constructions with high structural stability. Assessment of porosity under strain was found helpful to define requirements for pelvic floor devices. Clinical studies have to prove whether devices with high porosity as well as high structural stability can improve the patients' outcome.},
  language  = {en}
}
@article{SchubaWrona1999,
  author    = {Schuba, Marko and Wrona, Konrad},
  title     = {Electronic Commerce Transactions in a Wireless Environment / Schuba, Marko. ; Wrona, Konrad},
  pages     = {1 -- 9},
  year      = {1999},
  language  = {en}
}
@article{ProchnowGebingLadageetal.2011,
  author    = {Prochnow, Nora and Gebing, Tina and Ladage, Kerstin and Krause-Finkeldey, Dorothee and Ourdi, Abessamad El and Bitz, Andreas and Streckert, Joachim and Hansen, Volkert and Dermietzel, Rolf},
  title     = {Electromagnetic field effect or simply stress? Effects of UMTS exposure on hippocampal longterm plasticity in the context of procedure related hormone release},
  series = {PLoS one},
  volume    = {6},
  journal   = {PLoS one},
  number    = {5},
  publisher = {PLOS},
  address   = {San Francisco},
  doi       = {10.1371/journal.pone.0019437},
  pages     = {e19437},
  year      = {2011},
  abstract  = {Harmful effects of electromagnetic fields (EMF) on cognitive and behavioural features of humans and rodents have been controversially discussed and raised persistent concern about adverse effects of EMF on general brain functions. In the present study we applied radio-frequency (RF) signals of the Universal Mobile Telecommunications System (UMTS) to full brain exposed male Wistar rats in order to elaborate putative influences on stress hormone release (corticosteron; CORT and adrenocorticotropic hormone; ACTH) and on hippocampal derived synaptic long-term plasticity (LTP) and depression (LTD) as electrophysiological hallmarks for memory storage and memory consolidation. Exposure was computer controlled providing blind conditions. Nominal brain-averaged specific absorption rates (SAR) as a measure of applied mass-related dissipated RF power were 0, 2, and 10 W/kg over a period of 120 min. Comparison of cage exposed animals revealed, regardless of EMF exposure, significantly increased CORT and ACTH levels which corresponded with generally decreased field potential slopes and amplitudes in hippocampal LTP and LTD. Animals following SAR exposure of 2 W/kg (averaged over the whole brain of 2.3 g tissue mass) did not differ from the sham-exposed group in LTP and LTD experiments. In contrast, a significant reduction in LTP and LTD was observed at the high power rate of SAR (10 W/kg). The results demonstrate that a rate of 2 W/kg displays no adverse impact on LTP and LTD, while 10 W/kg leads to significant effects on the electrophysiological parameters, which can be clearly distinguished from the stress derived background. Our findings suggest that UMTS exposure with SAR in the range of 2 W/kg is not harmful to critical markers for memory storage and memory consolidation, however, an influence of UMTS at high energy absorption rates (10 W/kg) cannot be excluded.},
  language  = {en}
}
@inproceedings{SchoppHeuermann2013,
  author    = {Schopp, Christoph and Heuermann, Holger},
  title     = {Electrodeless low pressure lamp with bi-static matching at 2.45 GHz},
  series = {2013 European Microwave Conference (EuMC) , Nuremberg},
  booktitle = {2013 European Microwave Conference (EuMC) , Nuremberg},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  isbn      = {978-1-4799-0264-4},
  pages     = {881 -- 884},
  year      = {2013},
  language  = {en}
}
@article{WindmuellerSchapsZantisetal.2024,
  author    = {Windm{\"u}ller, Anna and Schaps, Kristian and Zantis, Frederik and Domgans, Anna and Taklu, Bereket Woldegbreal and Yang, Tingting and Tsai, Chih-Long and Schierholz, Roland and Yu, Shicheng and Kungl, Hans and Tempel, Hermann and Dunin-Borkowski, Rafal E. and H{\"u}ning, Felix and Hwang, Bing Joe and Eichel, R{\"u}diger-A.},
  title     = {Electrochemical activation of LiGaO2: implications for ga-doped garnet solid electrolytes in li-metal batteries},
  series = {ACS Applied Materials \& Interfaces},
  volume    = {16},
  journal   = {ACS Applied Materials \& Interfaces},
  number    = {30},
  publisher = {ACS Publications},
  address   = {Washington, DC},
  issn      = {39181-3919},
  doi       = {10.1021/acsami.4c03729},
  pages     = {14 Seiten},
  year      = {2024},
  abstract  = {Ga-doped Li7La3Zr2O12 garnet solid electrolytes exhibit the highest Li-ion conductivities among the oxide-type garnet-structured solid electrolytes, but instabilities toward Li metal hamper their practical application. The instabilities have been assigned to direct chemical reactions between LiGaO2 coexisting phases and Li metal by several groups previously. Yet, the understanding of the role of LiGaO2 in the electrochemical cell and its electrochemical properties is still lacking. Here, we are investigating the electrochemical properties of LiGaO2 through electrochemical tests in galvanostatic cells versus Li metal and complementary ex situ studies via confocal Raman microscopy, quantitative phase analysis based on powder X-ray diffraction, energy-dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy, and electron energy loss spectroscopy. The results demonstrate considerable and surprising electrochemical activity, with high reversibility. A three-stage reaction mechanism is derived, including reversible electrochemical reactions that lead to the formation of highly electronically conducting products. The results have considerable implications for the use of Ga-doped Li7La3Zr2O12 electrolytes in all-solid-state Li-metal battery applications and raise the need for advanced materials engineering to realize Ga-doped Li7La3Zr2O12for practical use.},
  language  = {en}
}
@incollection{NiendorfWinterFrauenrath2012,
  author    = {Niendorf, Thoralf and Winter, Lukas and Frauenrath, Tobias},
  title     = {Electrocardiogram in an MRI environment: Clinical needs, practical considerations, safety implications, technical solutions and fFuture directions},
  series = {Advances in Electrocardiograms - Methods and Analysis},
  booktitle = {Advances in Electrocardiograms - Methods and Analysis},
  editor    = {Millis, Richard},
  publisher = {IntechOpen},
  address   = {London},
  isbn      = {978-953-307-923-3 (print)},
  doi       = {10.5772/24340},
  pages     = {309 -- 324},
  year      = {2012},
  language  = {en}
}
@article{HeuermannSadeghfam2008,
  author    = {Heuermann, Holger and Sadeghfam, Arash},
  title     = {Electrically tunable bandpass filter with integrated carrier suppression for UHF RFID systems / Sadeghfam, Arash ; Heuermann, Holger},
  series = {European Microwave Conference, 2008, EuMC 2008, 38th},
  journal   = {European Microwave Conference, 2008, EuMC 2008, 38th},
  isbn      = {978-2-87487-006-4},
  pages     = {1727 -- 1730},
  year      = {2008},
  language  = {en}
}
@article{HeuermannSadeghfam2008,
  author    = {Heuermann, Holger and Sadeghfam, Arash},
  title     = {Electrically tunable bandpass filter with integrated carrier suppression for UHF RFID systems / Sadeghfam, Arash ; Heuermann, Holger},
  series = {European Conference on Wireless Technology, 2008. EuWiT 2008.},
  journal   = {European Conference on Wireless Technology, 2008. EuWiT 2008.},
  isbn      = {978-2-87487-008-8},
  pages     = {306 -- 309},
  year      = {2008},
  language  = {en}
}
@article{Hagemann1978,
  author    = {Hagemann, Hans-J{\"u}rgen},
  title     = {Electrical properties of acceptor-doped BaTiO3 ceramic. Hagemann, H. J.},
  series = {Berichte der Deutschen Keramischen Gesellschaft. 55 (1978)},
  journal   = {Berichte der Deutschen Keramischen Gesellschaft. 55 (1978)},
  isbn      = {0365-9542},
  pages     = {353 -- 355},
  year      = {1978},
  language  = {en}
}
@article{Prume2007,
  author    = {Prume, Klaus},
  title     = {Electrical and electromechanical characterization of piezoelectric thin films in view of MEMS application / Tiedke, S. ; Prume, K. ; Schmitz-Kempen, T.;},
  pages     = {702},
  year      = {2007},
  language  = {en}
}