@inproceedings{HeuermannHarzheimMuehmel2021,
  author    = {Heuermann, Holger and Harzheim, Thomas and M{\"u}hmel, Marc},
  title     = {A maritime harmonic radar search and rescue system using passive and active tags},
  series = {2020 17th European Radar Conference (EuRAD)},
  booktitle = {2020 17th European Radar Conference (EuRAD)},
  publisher = {IEEE},
  address   = {New York, NY},
  isbn      = {978-2-87487-061-3},
  doi       = {10.1109/EuRAD48048.2021.00030},
  pages     = {73 -- 76},
  year      = {2021},
  abstract  = {This article introduces a new maritime search and rescue system based on S-band illumination harmonic radar (HR). Passive and active tags have been developed and tested attached to life jackets and a rescue boat. This system was able to detect and range the active tags up to a range of 5800 m in tests on the Baltic Sea with an antenna input power of only 100 W. All electronic GHz components of the system, excluding the S-band power amplifier, were custom developed for this purpose. Special attention is given to the performance and conceptual differences between passive and active tags used in the system and integration with a maritime X-band navigation radar is demonstrated.},
  language  = {en}
}
@techreport{JaekelKleinBarthetal.1996,
  author    = {Jaekel, C. and Klein, C. and Barth, R. and Roskos, H. and Kyas, G. and Schroeer, M. and H{\"u}ning, Felix},
  title     = {Dynamik von Nichtgleichgewichtszustaenden in Hochtemperatursupraleitern Abschlussbericht},
  pages     = {47 Seiten},
  year      = {1996},
  abstract  = {Im Projekt wurden mit Hilfe zeitaufgeloester optischer Messtechniken Relaxations-Dynamiken von optisch angeregten Ladungstraegern und Hochfrequenzeigenschaften von Hochtemperatursupraleitern untersucht. Oberhalb der Sprungtemperatur wurden die Elektron-Phonon-Kopplungskonstanten fuer YBCO und BSCCO bestimmt. Dabei wurde erstmalig ein direkter Zusammenhang zwischen der Sprungtemperatur und der Kopplungstaerke gefunden. Der Kopplungsmechanismus enthaelt sowohl phononische als auch elektronische (spindynamische) Anteile. Unterhalb von T_c wird die Dynamik durch Aufbrechen und Rekombination von Cooper-Paaren bestimmt. Bei den Arbeiten zu den kohaerenten Phononen wurde ein Modell entwickelt, das das 'Anwerfen' der Phononen und das Amplitudenverhalten unterhalb der Sprungtemperatur erklaert. Als begleitende Untersuchungen wurden breitbandige Hochfrequenz-Messungen vorgenommen. Die Methode erlaubt die Untersuchung von Ladungstraegerdichten und von Streumechanismen. Erstmalig wurde in verspannten YBCO-Duennfilmen eine starke temperaturabhaengige Resonanz-Absorption beobachtet, die als Josephson-Plasmaresonanz an intrinsischen Kontakten identifiziert werden konnte. Die Nutzbarkeit dieser Kontakte fuer Bauelemente wurde durch einen Mikrowellendetektor demonstriert. Durch den Nachweis von emittierter gepulster Strahlung aus einer stromdurchflossenen supraleitenden Bruecke nach optischer Anregung wurde erstmals die Einsatzmoeglichkeit von HTSL fuer schnelle optische Schalter demonstriert. Es wurde gezeigt, dass die Schaltgeschwindigkeit eine direkte Folge der Ladungstraegerdynamik ist.},
  language  = {de}
}
@inproceedings{FerreinMeessenLimpertetal.2021,
  author    = {Ferrein, Alexander and Meeßen, Marcus and Limpert, Nicolas and Schiffer, Stefan},
  title     = {Compiling ROS schooling curricula via contentual taxonomies},
  series = {Robotics in Education},
  booktitle = {Robotics in Education},
  editor    = {Lepuschitz, Wilfried},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-67411-3},
  doi       = {10.1007/978-3-030-67411-3_5},
  pages     = {49 -- 60},
  year      = {2021},
  abstract  = {The Robot Operating System (ROS) is the current de-facto standard in robot middlewares. The steadily increasing size of the user base results in a greater demand for training as well. User groups range from students in academia to industry professionals with a broad spectrum of developers in between. To deliver high quality training and education to any of these audiences, educators need to tailor individual curricula for any such training. In this paper, we present an approach to ease compiling curricula for ROS trainings based on a taxonomy of the teaching contents. The instructor can select a set of dedicated learning units and the system will automatically compile the teaching material based on the dependencies of the units selected and a set of parameters for a particular training. We walk through an example training to illustrate our work.},
  language  = {en}
}
@article{RoepkeKoehlerDruryetal.2020,
  author    = {Roepke, Rene and K{\"o}hler, Klemens and Drury, Vincent and Schroeder, Ulrik and Wolf, Martin and Meyer, Ulrike},
  title     = {A pond full of phishing games - analysis of learning games for anti-phishing education},
  series = {Model-driven Simulation and Training Environments for Cybersecurity. MSTEC 2020},
  journal   = {Model-driven Simulation and Training Environments for Cybersecurity. MSTEC 2020},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-62433-0},
  doi       = {10.1007/978-3-030-62433-0_32020},
  pages     = {41 -- 60},
  year      = {2020},
  abstract  = {Game-based learning is a promising approach to anti-phishing education, as it fosters motivation and can help reduce the perceived difficulty of the educational material. Over the years, several prototypes for game-based applications have been proposed, that follow different approaches in content selection, presentation, and game mechanics. In this paper, a literature and product review of existing learning games is presented. Based on research papers and accessible applications, an in-depth analysis was conducted, encompassing target groups, educational contexts, learning goals based on Bloom's Revised Taxonomy, and learning content. As a result of this review, we created the publications on games (POG) data set for the domain of anti-phishing education. While there are games that can convey factual and conceptual knowledge, we find that most games are either unavailable, fail to convey procedural knowledge or lack technical depth. Thus, we identify potential areas of improvement for games suitable for end-users in informal learning contexts.},
  language  = {en}
}
@inproceedings{HoegenDonckerRuetters2020,
  author    = {Hoegen, Anne von and Doncker, Rik W. De and R{\"u}tters, Ren{\´e}},
  title     = {Teaching Digital Control of Operational Amplifier Processes with a LabVIEW Interface and Embedded Hardware},
  series = {2020 23rd International Conference on Electrical Machines and Systems (ICEMS)},
  booktitle = {2020 23rd International Conference on Electrical Machines and Systems (ICEMS)},
  publisher = {IEEE},
  address   = {New York, NY},
  doi       = {10.23919/ICEMS50442.2020.9290928},
  pages     = {1117 -- 1122},
  year      = {2020},
  abstract  = {Control engineering theory is hard to grasp for undergraduates during the first semesters, as it deals with the dynamical behavior of systems also in combination with control strategies on an abstract level. Therefore, operational amplifier (OpAmp) processes are reasonable and very effective systems to connect mathematical description with actual system's behavior. In this paper, we present an experiment for a laboratory session in which an embedded system, driven by a LabVIEW human machine interface (HMI) via USB, controls the analog circuits.With this setup we want to show the possibility of firstly, analyzing a first order process and secondly, designing a P-and PI-controller. Thereby, the theory of control engineering is always applied to the empirical results in order to break down the abstract level for the students.},
  language  = {en}
}
@incollection{SchubaHoefken2022,
  author    = {Schuba, Marko and H{\"o}fken, Hans-Wilhelm},
  title     = {Cybersicherheit in Produktion, Automotive und intelligenten Geb{\"a}uden},
  series = {IT-Sicherheit - Technologien und Best Practices f{\"u}r die Umsetzung im Unternehmen},
  booktitle = {IT-Sicherheit - Technologien und Best Practices f{\"u}r die Umsetzung im Unternehmen},
  publisher = {Carl Hanser Verlag},
  address   = {M{\"u}nchen},
  isbn      = {978-3-446-47223-5},
  doi       = {10.3139/9783446473478.012},
  pages     = {193 -- 218},
  year      = {2022},
  language  = {de}
}
@incollection{EnglaenderKaminskiSchuba2022,
  author    = {Engl{\"a}nder, Jacques and Kaminski, Lars and Schuba, Marko},
  title     = {Informationssicherheitsmanagement},
  series = {Digitalisierungs- und Informationsmanagement},
  booktitle = {Digitalisierungs- und Informationsmanagement},
  publisher = {Springer Vieweg},
  address   = {Berlin},
  isbn      = {978-3-662-63757-9},
  doi       = {10.1007/978-3-662-63758-6_15},
  pages     = {373 -- 398},
  year      = {2022},
  abstract  = {Daten und Informationen sind die wichtigsten Ressourcen vieler Unternehmen und m{\"u}ssen daher entsprechend gesch{\"u}tzt werden. Getrieben durch die erh{\"o}hte Vernetzung von Informationstechnologie, die h{\"o}here Offenheit infolge datengetriebener Dienstleistungen und eine starke Zunahme an Datenquellen, r{\"u}cken die Gefahren von Informationsdiebstahl, -manipulation und -verlust in den Fokus von produzierenden Unternehmen. Auf dem Weg zum lern- und wandlungsf{\"a}higen Unternehmen kann dies zu einem großen Hindernis werden, da einerseits zu hohe Sicherheitsanforderungen neue Entwicklungen beschr{\"a}nken, andererseits wegen des Mangels an ausreichenden Informationssicherheitskonzepten Unternehmen weniger Innovationen wagen. Deshalb bedarf es individuell angepasster Konzepte f{\"u}r die Bereiche IT-Security, IT-Safety und Datenschutz f{\"u}r vernetzte Produkte, Produktion und Arbeitspl{\"a}tze. Bei der Entwicklung und Durchsetzung dieser Konzepte steht der Faktor Mensch im Zentrum aller {\"U}berlegungen. In diesem Kapitel wird dargestellt, wie der Faktor Mensch bei der Erstellung von Informationssicherheitskonzepten in verschiedenen Phasen zu beachten ist. Beginnend mit der Integration von Informationssystemen und damit verbundenen Sicherheitsmaßnahmen, {\"u}ber die Administration, bis hin zur Anwendung durch den Endnutzer, werden Methoden beschrieben, die den Menschen, verbunden mit seinem Mehrwert wie auch den Risiken, einschließen. Dabei werden sowohl Grundlagen aufgezeigt als auch Konzepte vorgestellt, mit denen Entscheider in der Unternehmens-IT Leitlinien f{\"u}r die Informationssicherheit festlegen k{\"o}nnen.},
  language  = {de}
}
@inproceedings{SchubaHoefkenLinzbach2022,
  author    = {Schuba, Marko and H{\"o}fken, Hans-Wilhelm and Linzbach, Sophie},
  title     = {An ICS Honeynet for Detecting and Analyzing Cyberattacks in Industrial Plants},
  series = {2021 International Conference on Electrical, Computer and Energy Technologies (ICECET)},
  booktitle = {2021 International Conference on Electrical, Computer and Energy Technologies (ICECET)},
  publisher = {IEEE},
  isbn      = {978-1-6654-4231-2},
  doi       = {10.1109/ICECET52533.2021.9698746},
  pages     = {6 Seiten},
  year      = {2022},
  abstract  = {Cybersecurity of Industrial Control Systems (ICS) is an important issue, as ICS incidents may have a direct impact on safety of people or the environment. At the same time the awareness and knowledge about cybersecurity, particularly in the context of ICS, is alarmingly low. Industrial honeypots offer a cheap and easy to implement way to raise cybersecurity awareness and to educate ICS staff about typical attack patterns. When integrated in a productive network, industrial honeypots may not only reveal attackers early but may also distract them from the actual important systems of the network. Implementing multiple honeypots as a honeynet, the systems can be used to emulate or simulate a whole Industrial Control System. This paper describes a network of honeypots emulating HTTP, SNMP, S7communication and the Modbus protocol using Conpot, IMUNES and SNAP7. The nodes mimic SIMATIC S7 programmable logic controllers (PLCs) which are widely used across the globe. The deployed honeypots' features will be compared with the features of real SIMATIC S7 PLCs. Furthermore, the honeynet has been made publicly available for ten days and occurring cyberattacks have been analyzed},
  language  = {en}
}
@inproceedings{ChristianMontagSchubaetal.2018,
  author    = {Christian, Esser and Montag, Tim and Schuba, Marko and Allhof, Manuel},
  title     = {Future critical infrastructure and security - cyberattacks on charging stations},
  series = {31st International Electric Vehicle Symposium \& Exhibition and International Electric Vehicle Technology Conference (EVS31 \& EVTeC 2018)},
  booktitle = {31st International Electric Vehicle Symposium \& Exhibition and International Electric Vehicle Technology Conference (EVS31 \& EVTeC 2018)},
  publisher = {Society of Automotive Engineers of Japan (JSAE)},
  address   = {Tokyo},
  isbn      = {978-1-5108-9157-9},
  pages     = {665 -- 671},
  year      = {2018},
  language  = {en}
}
@inproceedings{MaikeLenzWolf2014,
  author    = {Maike, M{\"u}ller and Lenz, Laura and Wolf, Martin},
  title     = {Steigerung der Effektivit{\"a}t durch Prozessmodellierungs-Tools - {\"A}nderbarkeit und Transparenz von Prozessen am Beispiel der Business Simulation Apollo 13},
  series = {Informatik 2014},
  booktitle = {Informatik 2014},
  publisher = {Gesellschaft f{\"u}r Informatik e.V.},
  address   = {Bonn},
  isbn      = {978-3-88579-626-8},
  issn      = {1617-5468},
  pages     = {357 -- 369},
  year      = {2014},
  abstract  = {Die Nutzung von Prozessmodellierungsmethoden oder - werkzeugen kann erheblichen Einfluss auf die Effektivit{\"a}t von Prozessen haben. Das gilt insbesondere f{\"u}r Situationen, in denen Personen unter Stress stehen oder unge{\"u}bt sind. In diesen F{\"a}llen geben Prozessmodelle konkrete Empfehlungen, nach denen sich die handelnden Personen richten k{\"o}nnten. In Experimenten mit der Business-Simulation Apollo 13 haben wir den Effekt eines Einsatzes von Prozessmodellierungsmethoden und -werkzeugen untersucht. Bereits bekannte Theorien (z.B. {\"u}ber geeignete Verh{\"a}ltnisse von Kommunikationsinhalten) konnten best{\"a}tigt werden. Dar{\"u}ber hinaus haben wir eine besondere Bedeutung der {\"U}bertragbarkeit von Prozessmodellen in konkrete Handlungen identifiziert.},
  language  = {de}
}
@techreport{ThomaLaarmannMerkensetal.2020,
  author    = {Thoma, Andreas and Laarmann, Lukas and Merkens, Torsten and Franzke, Till and M{\"o}hren, Felix and Buttermann, Lilly and van der Weem, Dirk and Fischer, Maximilian and Misch, Philipp and B{\"o}hme, Mirijam and R{\"o}th, Thilo and Hebel, Christoph and Ritz, Thomas and Franke, Marina and Braun, Carsten},
  title     = {Entwicklung eines intermodalen Mobilit{\"a}tskonzeptes f{\"u}r die Pilotregion NRW/Rhein-Maas Euregio und Schaffung voller Kundenakzeptanz durch Transfer von Standards aus dem PKW-Bereich auf ein Flugtaxi : Schlussbericht : Projektakronym: SkyCab (Kategorie B) : Laufzeit in Monaten: 6 : Hauptthema: Kategorie B: Innovative Ideen mit Bezug zu UAS/Flugtaxis},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {97 Seiten},
  year      = {2020},
  language  = {de}
}
@article{Wolf2000,
  author    = {Wolf, Martin},
  title     = {Groupware related task design},
  series = {ACM SIGGROUP Bulletin},
  volume    = {21},
  journal   = {ACM SIGGROUP Bulletin},
  number    = {2},
  issn      = {2372-7403},
  doi       = {10.1145/605660.605662},
  pages     = {5 -- 8},
  year      = {2000},
  abstract  = {his report summarizes the results of a workshop on Groupware related task design which took place at the International Conference on Supporting Group Work Group'99, Arizona, from 14 th to 17 th November 1999. The workshop was addressed to people from different viewpoints, backgrounds, and domains: - Researchers dealing with questions of task analysis and task modeling for Groupware application from an academic point of view. They may contribute modelbased design approaches or theoretically oriented work - Practitioners with experience in the design and everyday use of groupware systems. They might refer to the practical side of the topic: "real" tasks, "real" problems, "real" users, etc.},
  language  = {en}
}
@inproceedings{KoenigVoelkerWolf2018,
  author    = {K{\"o}nig, Johannes Alexander and V{\"o}lker, Veronika and Wolf, Martin},
  title     = {The user-focused storybuilding framework for competence developing games - a design-framework considering the basics of an educational game's story},
  series = {ACHI 2018 : The Eleventh International Conference on Advances in Computer-Human Interactions},
  booktitle = {ACHI 2018 : The Eleventh International Conference on Advances in Computer-Human Interactions},
  isbn      = {978-1-61208-616-3},
  pages     = {98 -- 106},
  year      = {2018},
  abstract  = {During the development of a Competence Developing Game's (CDG) story it is indispensable to understand the target audience. Thereby, CDGs stories represent more than just the plot. The Story is about the Setting, the Characters and the Plot. As a toolkit to support the development of such a story, this paper introduces the UserFocused Storybuilding (short UFoS) Framework for CDGs. The Framework and its utilization will be explained, followed by a description of its development and derivation, including an empirical study. In addition, to simplify the Framework use regarding the CDG's target audience, a new concept of Nine Psychographic Player Types will be explained. This concept of Player Types provides an approach to handle the differences in between players during the UFoS Framework use. Thereby, this article presents a unique approach to the development of target group-differentiated CDGs stories.},
  language  = {en}
}
@inproceedings{DowidatKoenigWolf2017,
  author    = {Dowidat, Linda and K{\"o}nig, Johannes Alexander and Wolf, Martin},
  title     = {The motivational competence developing game framework},
  series = {Mensch und Computer 2017 - Tagungsband},
  booktitle = {Mensch und Computer 2017 - Tagungsband},
  publisher = {Gesellschaft f{\"u}r Informatik e.V.},
  address   = {Regensburg},
  doi       = {10.18420/muc2017-mci-0130},
  pages     = {15 -- 26},
  year      = {2017},
  abstract  = {Competence Developing Games (CDGs) are a new concept of how to think about games with serious intentions. In order to emphasize on this topic, a new framework has been developed. It basically relies on learning and motivation theories. This 'motivational Competence Developing Game Framework' demonstrates how it is possible to use these theories in a CDG development process. The theoretical derivation and use of the framework is explained in this paper.},
  language  = {en}
}
@inproceedings{KoenigWolf2018,
  author    = {K{\"o}nig, Johannes Alexander and Wolf, Martin},
  title     = {Cybersecurity awareness training provided by the competence developing game GHOST},
  series = {ACHI 2018 : The Eleventh International Conference on Advances in Computer-Human Interactions},
  booktitle = {ACHI 2018 : The Eleventh International Conference on Advances in Computer-Human Interactions},
  isbn      = {978-1-61208-616-3},
  pages     = {81 -- 87},
  year      = {2018},
  abstract  = {This paper introduces a Competence Developing Game (CDG) for the purpose of a cybersecurity awareness training for businesses. The target audience will be discussed in detail to understand their requirements. It will be explained why and how a mix of business simulation and serious game meets these stakeholder requirements. It will be shown that a tablet and touchscreen based approach is the most suitable solution. In addition, an empirical study will be briefly presented. The study was carried out to examine how an interaction system for a 3D-tablet based CDG has to be designed, to be manageable for non-game experienced employees. Furthermore, it will be explained which serious content is necessary for a Cybersecurity awareness training CDG and how this content is wrapped in the game},
  language  = {en}
}
@article{HeuermannEmmrichBongartz2022,
  author    = {Heuermann, Holger and Emmrich, Thomas and Bongartz, Simon},
  title     = {Microwave spark plug to support ignitions with high compression ratios},
  series = {IEEE Transactions on Plasma Science},
  journal   = {IEEE Transactions on Plasma Science},
  number    = {Early Access},
  publisher = {IEEE},
  issn      = {1939-9375},
  doi       = {10.1109/TPS.2022.3183690},
  pages     = {1 -- 6},
  year      = {2022},
  abstract  = {Upcoming gasoline engines should run with a larger number of fuels beginning from petrol over methanol up to gas by a wide range of compression ratios and a homogeneous charge. In this article, the microwave (MW) spark plug, based on a high-speed frequency hopping system, is introduced as a solution, which can support a nitrogen compression ratio up to 1:39 in a chamber and more. First, an overview of the high-speed frequency hopping MW ignition and operation system as well as the large number of applications are presented. Both gives an understanding of this new base technology for MW plasma generation. Focus of the theoretical part is the explanation of the internal construction of the spark plug, on the achievable of the high voltage generation as well as the high efficiency to hold the plasma. In detail, the development process starting with circuit simulations and ending with the numerical multiphysics field simulations is described. The concept is evaluated with a reference prototype covering the frequency range between 2.40 and 2.48 GHz and working over a large power range from 20 to 200 W. A larger number of different measurements starting by vector hot-S11 measurements and ending by combined working scenarios out of hot temperature, high pressure and charge motion are winding up the article. The limits for the successful pressure tests were given by the pressure chamber. Pressures ranged from 1 to 39 bar and charge motion up to 25 m/s as well as temperatures from 30◦ to 125◦.},
  language  = {en}
}
@inproceedings{NeesStengelMeisteretal.2020,
  author    = {Nees, Franz and Stengel, Ingo and Meister, Vera G. and Barton, Thomas and Herrmann, Frank and M{\"u}ller, Christian and Wolf, Martin},
  title     = {Angewandte Forschung in der Wirtschaftsinformatik 2020 : Tagungsband zur 33. AKWI-Jahrestagung am 14.09.2020, ausgerichtet von der Hochschule Karlsruhe - Wirtschaft und Technik / hrsg. von Franz Nees, Ingo Stengel, Vera G. Meister, Thomas Barton, Frank Herrmann, Christian M{\"u}ller, Martin R. Wolf},
  publisher = {mana-Buch},
  address   = {Heide},
  isbn      = {978-3-944330-66-2},
  doi       = {10.15771/978-3-944330-66-2},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:526-opus4-13840},
  pages     = {147 Seiten},
  year      = {2020},
  abstract  = {Tagungsbeitr{\"a}ge aus den Bereichen KI, Prozessorganisation und Plattformen f{\"u}r Gesch{\"a}ftsprozesse, Sicherheit und Datenschutz sowie Prototypen und Modelle.},
  language  = {de}
}
@inproceedings{WolfBartonHerrmannetal.2019,
  author    = {Wolf, Martin and Barton, Thomas and Herrmann, Frank and Meister, Vera G. and M{\"u}ller, Christian and Seel, Christian},
  title     = {Angewandte Forschung in der Wirtschaftsinformatik 2019 : Tagungsband zur 32. AKWI-Jahrestagung vom 15.09.2019 bis 18.09.2019 an der Fachhochschule f{\"u}r Angewandte Wissenschaften Aachen / hrsg. von Martin R. Wolf, Thomas Barton, Frank Herrmann, Vera G. Meister, Christian M{\"u}ller, Christian Seel},
  publisher = {mana-Buch},
  address   = {Heide},
  isbn      = {978-3-944330-62-4},
  doi       = {10.15771/978-3-944330-62-4},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:526-opus4-13026},
  pages     = {261 Seiten},
  year      = {2019},
  abstract  = {Tagungsbeitr{\"a}ge aus den Bereichen Projektmanagement, Didaktik in der Wirtschaftsinformatik, IT-Sicherheit, Anwendungsf{\"a}lle, Reifegradmodelle, Plattformen f{\"u}r Gesch{\"a}ftsprozesse und Prototypen.},
  language  = {de}
}
@inproceedings{MollKoehlerWolf2019,
  author    = {Moll, Florian and K{\"o}hler, Klemens and Wolf, Martin},
  title     = {Konzeption von IT-Sicherheitsl{\"o}sungen unter ethischen Gesichtspunkten am Beispiel einer Monitoring-App f{\"u}r mobile Endger{\"a}te},
  series = {Angewandte Forschung in der Wirtschaftsinformatik 2019 : Tagungsband zur 32. AKWI-Jahrestagung},
  booktitle = {Angewandte Forschung in der Wirtschaftsinformatik 2019 : Tagungsband zur 32. AKWI-Jahrestagung},
  publisher = {mana-Buch},
  address   = {Heide},
  isbn      = {978-3-944330-62-4},
  pages     = {61 -- 72},
  year      = {2019},
  abstract  = {Die steigende Popularit{\"a}t von mobilen Endger{\"a}ten im privaten und gesch{\"a}ftlichen Umfeld geht mit einem Anstieg an Sicherheitsl{\"u}cken und somit potentiellen Angriffsfl{\"a}chen einher. Als ein Element der technischen und organisatorischen Maßnahmen zum Schutz eines Netzwerkes k{\"o}nnen Monitoring-Apps dienen, die unerw{\"u}nschtes Verhalten und Angriffe erkennen. Die automatisierte {\"U}berwachung von Endger{\"a}ten ist jedoch rechtlich und ethisch komplex. Dies in Kombination mit einer hohen Sensibilit{\"a}t der Nutzer und Nutzerinnen dieser Ger{\"a}te in Bezug auf Privatsph{\"a}re, kann zu einer geringen Akzeptanz und Compliance f{\"u}hren. Eine datenschutzrechtlich und ethisch einwandfreie Konzeption solcher Apps bereits im Designprozess f{\"u}hrt zu h{\"o}herer Akzeptanz und verbessert so die Effizienz. Diese Analyse beschreibt M{\"o}glichkeiten zur Umsetzung.},
  language  = {de}
}
@inproceedings{BeckerWolf2019,
  author    = {Becker, Willi and Wolf, Martin},
  title     = {Entwicklung eines Einf{\"u}hrungskonzepts f{\"u}r IT-Service-Management in KMU},
  series = {Angewandte Forschung in der Wirtschaftsinformatik 2019 : Tagungsband zur 32. AKWI-Jahrestagung / hrsg. von Martin R. Wolf, Thomas Barton, Frank Herrmann, Vera G. Meister, Christian M{\"u}ller, Christian Seel},
  booktitle = {Angewandte Forschung in der Wirtschaftsinformatik 2019 : Tagungsband zur 32. AKWI-Jahrestagung / hrsg. von Martin R. Wolf, Thomas Barton, Frank Herrmann, Vera G. Meister, Christian M{\"u}ller, Christian Seel},
  publisher = {mana-Buch},
  address   = {Heide},
  isbn      = {978-3-944330-62-4},
  pages     = {129 -- 137},
  year      = {2019},
  abstract  = {Obwohl es eine Vielzahl von Einf{\"u}hrungskonzepten f{\"u}r ITSM gibt, hat sich bisher keines dieser Konzepte auf breiter Linie durchgesetzt. Das gilt in erh{\"o}htem Maße f{\"u}r ITSM-Einf{\"u}hrungskonzepte f{\"u}r KMU, wohl nicht zuletzt aufgrund der Tatsache, dass der Mehrwert von ITSM f{\"u}r KMU aufgrund der geringeren Gr{\"o}ße der IT-Organisationen nur entsprechend schwieriger generiert werden kann. Mit diesem Beitrag wird ein Einf{\"u}hrungskonzept f{\"u}r ITSM in KMU systematisch hergeleitet. Daf{\"u}r wurden zun{\"a}chst die Treiber und Barrieren von ITSM untersucht, um daraus ein umfassendes Wirkmodell zu entwickeln. Da mit diesem Wirkungsmodell die Einflussfaktoren auf den Erfolg von ITSM in KMU deutlich werden, konnte auf dieser Basis ein Einf{\"u}hrungskonzept abgeleitet werden, welches insbesondere die positiven Effekte unterst{\"u}tzt bzw. verst{\"a}rkt.},
  language  = {de}
}
@inproceedings{BertschMeineckeWolfetal.2019,
  author    = {Bertsch, Timo and Meinecke, Matthias and Wolf, Martin and Schmunk, Karina},
  title     = {Smart-Living-Services nur gegen Daten? Process-Mining als M{\"o}glichkeit zur Steigerung der Akzeptanz!},
  series = {Angewandte Forschung in der Wirtschaftsinformatik 2019 : Tagungsband zur 32. AKWI-Jahrestagung / hrsg. von Martin R. Wolf, Thomas Barton, Frank Herrmann, Vera G. Meister, Christian M{\"u}ller, Christian Seel},
  booktitle = {Angewandte Forschung in der Wirtschaftsinformatik 2019 : Tagungsband zur 32. AKWI-Jahrestagung / hrsg. von Martin R. Wolf, Thomas Barton, Frank Herrmann, Vera G. Meister, Christian M{\"u}ller, Christian Seel},
  publisher = {mana-Buch},
  address   = {Heide},
  isbn      = {978-3-944330-62-4},
  pages     = {216 -- 226},
  year      = {2019},
  abstract  = {Seit Jahren etablieren sich Technologien in unserem Alltag, die mit Hilfe von smarten Komponenten neue Services und Vernetzungsm{\"o}glichkeiten schaffen. Dieses Paper beschreibt die Ergebnisse einer Studie, die die Akzeptanz von IoT-gest{\"u}tzten, smarten Services im privaten Umfeld untersucht. Dabei wird eine zentrale Datenverarbeitung mit automatisierter Erstellung smarter Services der dezentralen Datenverarbeitung mit manueller Serviceerstellung in sieben Kategorien gegen{\"u}bergestellt. Die Auswertung der Studie legt die Forschungsfrage nahe, ob das Nutzerverhalten im Kontext Smart Living nicht auch mit einem dezentralen L{\"o}sungsansatz, und somit unabh{\"a}ngig von großen Unternehmen, analysiert werden kann. Hierf{\"u}r wird im zweiten Teil des Papers die Anwendbarkeit von Process-Mining im Bereich Smart Living untersucht und prototypisch getestet.},
  language  = {de}
}
@inproceedings{KoenigKaiserWolf2019,
  author    = {K{\"o}nig, Johannes Alexander and Kaiser, Steffen and Wolf, Martin},
  title     = {Entwicklung und Evaluierung eines Regeleditors f{\"u}r die grafische Erstellung von „Smart Living Environment"-Services},
  series = {Angewandte Forschung in der Wirtschaftsinformatik 2019 : Tagungsband zur 32. AKWI-Jahrestagung / hrsg. von Martin R. Wolf, Thomas Barton, Frank Herrmann, Vera G. Meister, Christian M{\"u}ller, Christian Seel},
  booktitle = {Angewandte Forschung in der Wirtschaftsinformatik 2019 : Tagungsband zur 32. AKWI-Jahrestagung / hrsg. von Martin R. Wolf, Thomas Barton, Frank Herrmann, Vera G. Meister, Christian M{\"u}ller, Christian Seel},
  publisher = {mana-Buch},
  address   = {Heide},
  isbn      = {978-3-944330-62-4},
  pages     = {234 -- 243},
  year      = {2019},
  abstract  = {In diesem Paper wird die Entwicklung und Evaluation eines grafischen Regeleditors f{\"u}r das Erstellen von „Smart Living Environments"-Services vorgestellt. Daf{\"u}r werden zun{\"a}chst die Deduktion und Implementierung des grafischen Regeleditors erl{\"a}utert. Anschließend wird eine Probandenstudie vorgestellt, in welcher der Mehrwert bezogen auf die Aspekte Zeit, Fehleranf{\"a}lligkeit und Gebrauchstauglichkeit festgestellt wird.},
  language  = {de}
}
@inproceedings{WolfKoenig2017,
  author    = {Wolf, Martin and K{\"o}nig, Johannes Alexander},
  title     = {Competence Developing Games - Ein {\"U}berblick},
  series = {INFORMATIK 2017, Lecture Notes in Informatics (LNI), Gesellschaft f{\"u}r Informatik},
  booktitle = {INFORMATIK 2017, Lecture Notes in Informatics (LNI), Gesellschaft f{\"u}r Informatik},
  editor    = {Eibl, Maximilian and Gaedke, Martin},
  organization    = {Gesellschaft f{\"u}r Informatik},
  isbn      = {978-3-88579-669-5},
  doi       = {10.18420/in2017_32},
  pages     = {385 -- 391},
  year      = {2017},
  abstract  = {Es existieren verschiedenste Arten von Spielen, die versuchen, die Motivation einer Spielsituation in einen ernsten Kontext zu {\"u}berf{\"u}hren. In diesem Artikel wird der {\"U}berbegriff „Competence Developing Games" definiert und anhand von Beispielen erl{\"a}utert. Daf{\"u}r werden Erkennungskriterien vorgestellt, entsprechende Spieltypen erl{\"a}utert und eine Zuordnung durch-gef{\"u}hrt.},
  language  = {de}
}
@article{FiedlerOrzadaFloeseretal.2022,
  author    = {Fiedler, Thomas M. and Orzada, Stephan and Fl{\"o}ser, Martina and Rietsch, Stefan H. G. and Schmidt, Simon and Stelter, Jonathan K. and Wittrich, Marco and Quick, Harald H. and Bitz, Andreas and Ladd, Mark E.},
  title     = {Performance and safety assessment of an integrated transmit array for body imaging at 7 T under consideration of specificabsorption rate, tissue temperature, and thermal dose},
  series = {NMR in Biomedicine},
  volume    = {35},
  journal   = {NMR in Biomedicine},
  number    = {5},
  publisher = {Wiley},
  issn      = {0952-3480 (Print)},
  doi       = {10.1002/nbm.4656},
  pages     = {1 -- 17},
  year      = {2022},
  abstract  = {In this study, the performance of an integrated body-imaging array for 7 T with 32 radiofrequency (RF) channels under consideration of local specific absorption rate (SAR), tissue temperature, and thermal dose limits was evaluated and the imaging performance was compared with a clinical 3 T body coil. Thirty-two transmit elements were placed in three rings between the bore liner and RF shield of the gradient coil. Slice-selective RF pulse optimizations for B1 shimming and spokes were performed for differently oriented slices in the body under consideration of realistic constraints for power and local SAR. To improve the B1+ homogeneity, safety assessments based on temperature and thermal dose were performed to possibly allow for higher input power for the pulse optimization than permissible with SAR limits. The results showed that using two spokes, the 7 T array outperformed the 3 T birdcage in all the considered regions of interest. However, a significantly higher SAR or lower duty cycle at 7 T is necessary in some cases to achieve similar B1+ homogeneity as at 3 T. The homogeneity in up to 50 cm-long coronal slices can particularly benefit from the high RF shim performance provided by the 32 RF channels. The thermal dose approach increases the allowable input power and the corresponding local SAR, in one example up to 100 W/kg, without limiting the exposure time necessary for an MR examination. In conclusion, the integrated antenna array at 7 T enables a clinical workflow for body imaging and comparable imaging performance to a conventional 3 T clinical body coil.},
  language  = {en}
}
@article{SchulteTiggesFoersterNikolovskietal.2022,
  author    = {Schulte-Tigges, Joschua and F{\"o}rster, Marco and Nikolovski, Gjorgji and Reke, Michael and Ferrein, Alexander and Kaszner, Daniel and Matheis, Dominik and Walter, Thomas},
  title     = {Benchmarking of various LiDAR sensors for use in self-driving vehicles in real-world environments},
  series = {Sensors},
  volume    = {22},
  journal   = {Sensors},
  number    = {19},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {1424-8220},
  doi       = {10.3390/s22197146},
  pages     = {20 Seiten},
  year      = {2022},
  abstract  = {Abstract In this paper, we report on our benchmark results of the LiDAR sensors Livox Horizon, Robosense M1, Blickfeld Cube, Blickfeld Cube Range, Velodyne Velarray H800, and Innoviz Pro. The idea was to test the sensors in different typical scenarios that were defined with real-world use cases in mind, in order to find a sensor that meet the requirements of self-driving vehicles. For this, we defined static and dynamic benchmark scenarios. In the static scenarios, both LiDAR and the detection target do not move during the measurement. In dynamic scenarios, the LiDAR sensor was mounted on the vehicle which was driving toward the detection target. We tested all mentioned LiDAR sensors in both scenarios, show the results regarding the detection accuracy of the targets, and discuss their usefulness for deployment in self-driving cars.},
  language  = {en}
}
@article{HoffmannRohrbachUhletal.2022,
  author    = {Hoffmann, Andreas and Rohrbach, Felix and Uhl, Matthias and Ceblin, Maximilian and Bauer, Thomas and Mallah, Marcel and Jacob, Timo and Heuermann, Holger and Kuehne, Alexander J. C.},
  title     = {Atmospheric pressure plasma-jet treatment of polyacrylonitrile-nonwovens—Stabilization and roll-to-roll processing},
  series = {Journal of Applied Polymer Science},
  volume    = {139},
  journal   = {Journal of Applied Polymer Science},
  number    = {37},
  publisher = {Wiley},
  issn      = {0021-8995 (Print)},
  doi       = {10.1002/app.52887},
  pages     = {1 -- 9},
  year      = {2022},
  abstract  = {Carbon nanofiber nonwovens represent a powerful class of materials with prospective application in filtration technology or as electrodes with high surface area in batteries, fuel cells, and supercapacitors. While new precursor-to-carbon conversion processes have been explored to overcome productivity restrictions for carbon fiber tows, alternatives for the two-step thermal conversion of polyacrylonitrile precursors into carbon fiber nonwovens are absent. In this work, we develop a continuous roll-to-roll stabilization process using an atmospheric pressure microwave plasma jet. We explore the influence of various plasma-jet parameters on the morphology of the nonwoven and compare the stabilized nonwoven to thermally stabilized samples using scanning electron microscopy, differential scanning calorimetry, and infrared spectroscopy. We show that stabilization with a non-equilibrium plasma-jet can be twice as productive as the conventional thermal stabilization in a convection furnace, while producing electrodes of comparable electrochemical performance.},
  language  = {en}
}
@inproceedings{WalterElsenMuelleretal.1999,
  author    = {Walter, Peter and Elsen, Ingo and M{\"u}ller, Holger and Kraiss, Karl-Friedrich},
  title     = {3D object recognition with a specialized mixtures of experts architecture},
  series = {IJCNN'99. International Joint Conference on Neural Networks. Proceedings},
  booktitle = {IJCNN'99. International Joint Conference on Neural Networks. Proceedings},
  publisher = {IEEE},
  address   = {New York},
  isbn      = {0-7803-5529-6},
  issn      = {1098-7576},
  doi       = {10.1109/IJCNN.1999.836243},
  pages     = {3563 -- 3568},
  year      = {1999},
  abstract  = {Aim of the AXON2 project (Adaptive Expert System for Object Recogniton using Neuml Networks) is the development of an object recognition system (ORS) capable of recognizing isolated 3d objects from arbitrary views. Commonly, classification is based on a single feature extracted from the original image. Here we present an architecture adapted from the Mixtures of Eaqerts algorithm which uses multiple neuml networks to integmte different features. During tmining each neural network specializes in a subset of objects or object views appropriate to the properties of the corresponding feature space. In recognition mode the system dynamically chooses the most relevant features and combines them with maximum eficiency. The remaining less relevant features arz not computed and do therefore not decelerate the-recognition process. Thus, the algorithm is well suited for ml-time applications.},
  language  = {en}
}
@article{ElsenKraiss1999,
  author    = {Elsen, Ingo and Kraiss, Karl-Friedrich},
  title     = {System concept and realization of a scalable neurocomputing architecture},
  series = {Systems Analysis Modelling Simulation},
  volume    = {35},
  journal   = {Systems Analysis Modelling Simulation},
  number    = {4},
  publisher = {Gordon and Breach Science Publishers},
  address   = {Amsterdam},
  issn      = {0232-9298},
  pages     = {399 -- 419},
  year      = {1999},
  abstract  = {This paper describes the realization of a novel neurocomputer which is based on the concepts of a coprocessor. In contrast to existing neurocomputers the main interest was the realization of a scalable, flexible system, which is capable of computing neural networks of arbitrary topology and scale, with full independence of special hardware from the software's point of view. On the other hand, computational power should be added, whenever needed and flexibly adapted to the requirements of the application. Hardware independence is achieved by a run time system which is capable of using all available computing power, including multiple host CPUs and an arbitrary number of neural coprocessors autonomously. The realization of arbitrary neural topologies is provided through the implementation of the elementary operations which can be found in most neural topologies.},
  language  = {en}
}
@article{ElsenKraissKrumbiegeletal.1999,
  author    = {Elsen, Ingo and Kraiss, Karl-Friedrich and Krumbiegel, Dirk and Walter, Peter and Wickel, Jochen},
  title     = {Visual information retrieval for 3D product identification: a midterm report},
  series = {KI - K{\"u}nstliche Intelligenz},
  volume    = {13},
  journal   = {KI - K{\"u}nstliche Intelligenz},
  number    = {1},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1610-1987},
  pages     = {64 -- 67},
  year      = {1999},
  language  = {en}
}
@inproceedings{Elsen1998,
  author    = {Elsen, Ingo},
  title     = {A pixel based approach to view based object recognition with self-organizing neural networks},
  series = {IECON'98. Proceedings of the 24th Annual Conference of the IEEE Industrial Electronics Society},
  booktitle = {IECON'98. Proceedings of the 24th Annual Conference of the IEEE Industrial Electronics Society},
  publisher = {IEEE},
  address   = {New York},
  isbn      = {0-7803-4503-7},
  doi       = {10.1109/IECON.1998.724032},
  pages     = {2040 -- 2044},
  year      = {1998},
  abstract  = {This paper addresses the pixel based classification of three dimensional objects from arbitrary views. To perform this task a coding strategy, inspired by the biological model of human vision, for pixel data is described. The coding strategy ensures that the input data is invariant against shift, scale and rotation of the object in the input domain. The image data is used as input to a class of self organizing neural networks, the Kohonen-maps or self-organizing feature maps (SOFM). To verify this approach two test sets have been generated: the first set, consisting of artificially generated images, is used to examine the classification properties of the SOFMs; the second test set examines the clustering capabilities of the SOFM when real world image data is applied to the network after it has been preprocessed to be invariant against shift, scale and rotation. It is shown that the clustering capability of the SOFM is strongly dependant on the invariance coding of the images.},
  language  = {en}
}
@inproceedings{ElsenKraissKrumbiegel1997,
  author    = {Elsen, Ingo and Kraiss, Karl-Friedrich and Krumbiegel, Dirk},
  title     = {Pixel based 3D object recognition with bidirectional associative memories},
  series = {International Conference on Neural Networks 1997},
  booktitle = {International Conference on Neural Networks 1997},
  publisher = {IEEE},
  address   = {New York},
  isbn      = {0-7803-4122-8},
  pages     = {1679 -- 1684},
  year      = {1997},
  abstract  = {This paper addresses the pixel based recognition of 3D objects with bidirectional associative memories. Computational power and memory requirements for this approach are identified and compared to the performance of current computer architectures by benchmarking different processors. It is shown, that the performance of special purpose hardware, like neurocomputers, is between one and two orders of magnitude higher than the performance of mainstream hardware. On the other hand, the calculation of small neural networks is performed more efficiently on mainstream processors. Based on these results a novel concept is developed, which is tailored for the efficient calculation of bidirectional associative memories. The computational efficiency is further enhanced by the application of algorithms and storage techniques which are matched to characteristics of the application at hand.},
  language  = {en}
}
@article{WiegnerVolkerMainzetal.2023,
  author    = {Wiegner, Jonas and Volker, Hanno and Mainz, Fabian and Backes, Andreas and Loeken, Michael and H{\"u}ning, Felix},
  title     = {Energy analysis of a wireless sensor node powered by a Wiegand sensor},
  series = {Journal of Sensors and Sensor Systems (JSSS)},
  volume    = {12},
  journal   = {Journal of Sensors and Sensor Systems (JSSS)},
  number    = {1},
  publisher = {Copernicus Publ.},
  address   = {G{\"o}ttingen},
  issn      = {2194-878X},
  doi       = {10.5194/jsss-12-85-2023},
  pages     = {85 -- 92},
  year      = {2023},
  abstract  = {This article describes an Internet of things (IoT) sensing device with a wireless interface which is powered by the energy-harvesting method of the Wiegand effect. The Wiegand effect, in contrast to continuous sources like photovoltaic or thermal harvesters, provides small amounts of energy discontinuously in pulsed mode. To enable an energy-self-sufficient operation of the sensing device with this pulsed energy source, the output energy of the Wiegand generator is maximized. This energy is used to power up the system and to acquire and process data like position, temperature or other resistively measurable quantities as well as transmit these data via an ultra-low-power ultra-wideband (UWB) data transmitter. A proof-of-concept system was built to prove the feasibility of the approach. The energy consumption of the system during start-up was analysed, traced back in detail to the individual components, compared to the generated energy and processed to identify further optimization options. Based on the proof of concept, an application prototype was developed.},
  language  = {en}
}
@misc{HueningBackes2022,
  author    = {H{\"u}ning, Felix and Backes, Andreas},
  title     = {Wiegand-Modul},
  year      = {2022},
  abstract  = {Ein Wiegand-Modul (110;210;310) umfassend- eine Sensorspule (112;212;312),- einen ersten Wiegand-Draht (116a;216a;316a), der zumindest teilweise innerhalb der Sensorspule (112;212;312) angeordnet ist, und- einen zweiten Wiegand-Draht (116b;216b;316b), der zumindest teilweise innerhalb der Sensorspule (112;212;312) angeordnet ist und sich im Wesentlichen parallel zu dem ersten Wiegand-Draht (116a;216a;316a) erstreckt, ist bekannt.Um eine effiziente Ausnutzung der durch die Ummagnetisierung der Wiegand-Dr{\"a}hte (116a,116b;216a,216b;316a,316b) in die Sensorspule (112;212;312) induzierten elektrischen Energie zu erm{\"o}glichen, sind der erste Wiegand-Draht (116a;216a;316a) und der zweite Wiegand-Draht (116b;216b;316b) bezogen auf eine axiale Richtung der Sensorspule (112;212;312) versetzt zueinander angeordnet.},
  language  = {de}
}
@inproceedings{ChircuCzarneckiFriedmannetal.2023,
  author    = {Chircu, Alina and Czarnecki, Christian and Friedmann, Daniel and Pomaskow, Johanna and Sultanow, Eldar},
  title     = {Towards a Digital Twin of Society},
  series = {Proceedings of the 56th Hawaii International Conference on System Sciences 2023},
  booktitle = {Proceedings of the 56th Hawaii International Conference on System Sciences 2023},
  publisher = {University of Hawai'i},
  address   = {Honolulu},
  isbn      = {978-0-9981331-6-4},
  pages     = {6748 -- 6757},
  year      = {2023},
  abstract  = {This paper describes the potential for developing a digital twin of society- a dynamic model that can be used to observe, analyze, and predict the evolution of various societal aspects. Such a digital twin can help governmental agencies and policy makers in interpreting trends, understanding challenges, and making decisions regarding investments or policies necessary to support societal development and ensure future prosperity. The paper reviews related work regarding the digital twin paradigm and its applications. The paper presents a motivating case study- an analysis of opportunities and challenges faced by the German federal employment agency, Bundesagentur f¨ur Arbeit (BA), proposes solutions using digital twins, and describes initial proofs of concept for such solutions.},
  language  = {en}
}
@misc{WiegnerVolkerMainzetal.2022,
  author    = {Wiegner, J. and Volker, H. and Mainz, F. and Backes, A. and L{\"o}ken, M. and H{\"u}ning, Felix},
  title     = {Wiegand-Effect-Powered Wireless IT Sensor Node},
  year      = {2022},
  abstract  = {With the growing interest in small distributed sensors for the "Internet of Things", more attention is being paid to energy harvesting techologies. Reducing or eliminating the need for external power sources or batteries make devices more self-sufficient, more reliable, and reduces maintenance requirements. The Wiegand effect is a proven technology for harvesting small amounts of electrical power from mechanical motion.},
  language  = {en}
}
@incollection{StollenwerkFranzkeMaureretal.2023,
  author    = {Stollenwerk, Dominik and Franzke, Till and Maurer, Florian and Reinkensmeier, Sebastian and Kim, Franken and Tambornino, Philipp and Haas, Florian and Rieke, Christian and Hermanuz, Andreas and Borchert, J{\"o}rg and Ritz, Thomas and Sander, Volker},
  title     = {Smarte Lades{\"a}ulen : Netz- und Marktdienliches {\"o}ffentliches Laden},
  series = {Towards the New Normal in Mobility : Technische und betriebswirtschaftliche Aspekte},
  booktitle = {Towards the New Normal in Mobility : Technische und betriebswirtschaftliche Aspekte},
  editor    = {Proff, Heike},
  publisher = {Springer Gabler},
  address   = {Wiesbaden},
  isbn      = {978-3-658-39437-0 (Print)},
  doi       = {10.1007/978-3-658-39438-7_18},
  pages     = {287 -- 304},
  year      = {2023},
  abstract  = {Stand 01.01.2022 sind in Deutschland 618.460 elektrisch angetriebene KFZ zugelassen. Insgesamt sind derzeit 48.540.878 KFZ zugelassen, was einer Elektromobilit{\"a}tsquote von ca. 1,2 \% entspricht. Derzeit werden Elektromobile {\"u}ber Ladestationen oder Steckdosen mit dem Stromnetz verbunden und {\"u}blicherweise mit der vollen Ladekapazit{\"a}t des Anschlusses aufgeladen, bis das Batteriemanagementsystem des Fahrzeugs abh{\"a}ngig vom Ladezustand der Batterie die Ladeleistung reduziert.},
  language  = {de}
}
@inproceedings{AltherrConzenElsenetal.2023,
  author    = {Altherr, Lena and Conzen, Max and Elsen, Ingo and Frauenrath, Tobias and Lyrmann, Andreas},
  title     = {Sensor retrofitting of existing buildings in an interdisciplinary teaching project at university level},
  series = {Tagungsband AALE 2023 : mit Automatisierung gegen den Klimawandel},
  booktitle = {Tagungsband AALE 2023 : mit Automatisierung gegen den Klimawandel},
  editor    = {Reiff-Stephan, J{\"o}rg and J{\"a}kel, Jens and Schwarz, Andr{\´e}},
  publisher = {le-tex publishing services GmbH},
  address   = {Leipzig},
  isbn      = {978-3-910103-01-6},
  doi       = {10.33968/2023.04},
  pages     = {31 -- 40},
  year      = {2023},
  abstract  = {Existing residential buildings have an average lifetime of 100 years. Many of these buildings will exist for at least another 50 years. To increase the efficiency of these buildings while keeping costs at reasonable rates, they can be retrofitted with sensors that deliver information to central control units for heating, ventilation and electricity. This retrofitting process should happen with minimal intervention into existing infrastructure and requires new approaches for sensor design and data transmission. At FH Aachen University of Applied Sciences, students of different disciplines work together to learn how to design, build, deploy and operate such sensors. The presented teaching project already created a low power design for a combined CO2, temperature and humidity measurement device that can be easily integrated into most home automation systems},
  language  = {en}
}
@inproceedings{DeyElsenFerreinetal.2021,
  author    = {Dey, Thomas and Elsen, Ingo and Ferrein, Alexander and Frauenrath, Tobias and Reke, Michael and Schiffer, Stefan},
  title     = {CO2 Meter: a do-it-yourself carbon dioxide measuring device for the classroom},
  series = {PETRA '21: Proceedings of the 14th Pervasive Technologies Related to Assistive Environments Conference},
  booktitle = {PETRA '21: Proceedings of the 14th Pervasive Technologies Related to Assistive Environments Conference},
  editor    = {Makedon, Fillia},
  publisher = {Association for Computing Machinery},
  address   = {New York},
  isbn      = {9781450387927},
  doi       = {10.1145/3453892.3462697},
  pages     = {292 -- 299},
  year      = {2021},
  abstract  = {In this paper we report on CO2 Meter, a do-it-yourself carbon dioxide measuring device for the classroom. Part of the current measures for dealing with the SARS-CoV-2 pandemic is proper ventilation in indoor settings. This is especially important in schools with students coming back to the classroom even with high incidents rates. Static ventilation patterns do not consider the individual situation for a particular class. Influencing factors like the type of activity, the physical structure or the room occupancy are not incorporated. Also, existing devices are rather expensive and often provide only limited information and only locally without any networking. This leaves the potential of analysing the situation across different settings untapped. Carbon dioxide level can be used as an indicator of air quality, in general, and of aerosol load in particular. Since, according to the latest findings, SARS-CoV-2 can be transmitted primarily in the form of aerosols, carbon dioxide may be used as a proxy for the risk of a virus infection. Hence, schools could improve the indoor air quality and potentially reduce the infection risk if they actually had measuring devices available in the classroom. Our device supports schools in ventilation and it allows for collecting data over the Internet to enable a detailed data analysis and model generation. First deployments in schools at different levels were received very positively. A pilot installation with a larger data collection and analysis is underway.},
  language  = {en}
}
@inproceedings{ElsenSchmalzbauer2011,
  author    = {Elsen, Ingo and Schmalzbauer, Michael},
  title     = {Messsystematik zur Steuerung der Produkt- und Prozessqualit{\"a}t in Systemintegrationsprojekten - ein Erfahrungsbericht},
  series = {Software Engineering 2011 - Fachtagung des GI-Fachbereichs Softwaretechnik, 21. - 25. Februar 2011 in Karlsruhe},
  booktitle = {Software Engineering 2011 - Fachtagung des GI-Fachbereichs Softwaretechnik, 21. - 25. Februar 2011 in Karlsruhe},
  editor    = {Reussner, Ralf and Grund, Matthias and Andreas, Oberweis and Tichy, Walter},
  publisher = {Gesellschaft f{\"u}r Informatik eV},
  address   = {Bonn},
  isbn      = {9783885792772},
  issn      = {1617-5468},
  pages     = {1 Seite},
  year      = {2011},
  abstract  = {Der Erfolg eines Softwarenentwicklungsprojektes insbesondere eines Systemintegrationsprojektes wird mit der Erf{\"u}llung des „Teufelsdreiecks", „In-Time", „In-Budget", „In-Quality" gemessen. Hierzu ist die Kenntnis der Software- und Prozessqualit{\"a}t essenziell, um die Einhaltung der Qualit{\"a}tskriterien festzustellen, aber auch, um eine Vorhersage hinsichtlich Termin- und Budgettreue zu treffen. Zu diesem Zweck wurde in der T-Systems Systems Integration ein System aus verschiedenen Key Performance Indikatoren entworfen und in der Organisation implementiert, das genau das leistet und die Kriterien f{\"u}r CMMI Level 3 erf{\"u}llt.},
  language  = {de}
}
@inproceedings{ElsenHawariJohnen2010,
  author    = {Elsen, Ingo and Hawari, Asma and Johnen, Uwe},
  title     = {Produktkernel in der Systemintegration (Erfahrungsbericht aus der Praxis)},
  series = {Vom Projekt zum Produkt - Fachtagung des GI-Fachausschusses Management der Anwendungsentwicklung und -wartung im Fachbereich Wirtschaftsinformatik (WI-MAW), 1. - 3. Dezember 2010 in Aachen},
  booktitle = {Vom Projekt zum Produkt - Fachtagung des GI-Fachausschusses Management der Anwendungsentwicklung und -wartung im Fachbereich Wirtschaftsinformatik (WI-MAW), 1. - 3. Dezember 2010 in Aachen},
  editor    = {Pietsch, Wolfram and Krams, Benedikt},
  publisher = {Gesellschaft f{\"u}r Informatik eV},
  address   = {Bonn},
  isbn      = {9783885792727},
  issn      = {1617-5468},
  pages     = {93 -- 102},
  year      = {2010},
  abstract  = {In der Vergangenheit basierten große Systemintegrationsprojekte in der Regel auf Individualentwicklungen f{\"u}r einzelne Kunden. Getrieben durch Kostendruck steigt aber der Bedarf nach standardisierten L{\"o}sungen, die gleichzeitig die individuellen Anforderungen des jeweiligen Umfelds ber{\"u}cksichtigen. T-Systems GEI GmbH wird beiden Anforderungen mit Produktkerneln gerecht. Neben den technischen Aspekten der Kernelentwicklung spielen besonders organisatorische Aspekte eine Rolle, um Kernel effizient und qualitativ hochwertig zu entwickeln, ohne deren Funktionalit{\"a}ten ins Uferlose wachsen zu lassen. Umgesetzt hat T-Systems dieses Konzept f{\"u}r Flughafeninformationssysteme. Damit kann dem wachsenden Bedarf der Flughafenbetreiber nach einer effizienten und kosteng{\"u}nstigen Softwarel{\"o}sung zur Unterst{\"u}tzung Ihrer Gesch{\"a}ftsprozesse entsprochen werden.},
  language  = {de}
}
@article{ElsenHartungHornetal.2001,
  author    = {Elsen, Ingo and Hartung, Frank and Horn, Uwe and Kampmann, Markus and Peters, Liliane},
  title     = {Streaming technology in 3G mobile communication systems},
  series = {Computer : innovative technology for computer professionals},
  volume    = {34},
  journal   = {Computer : innovative technology for computer professionals},
  number    = {9 Seiten},
  editor    = {Voas, Jeffrey},
  publisher = {IEEE},
  address   = {New York},
  issn      = {0018-9162},
  pages     = {46 -- 52},
  year      = {2001},
  abstract  = {Third-generation mobile communication systems will combine standardized streaming with a range of unique services to provide high-quality Internet content that meets the specific needs of the rapidly growing mobile market.},
  language  = {en}
}
@phdthesis{Elsen2000,
  author    = {Elsen, Ingo},
  title     = {Ansichtenbasierte 3D-Objekterkennung mit erweiterten selbstorganisierenden Merkmalskarten},
  publisher = {VDI-Verlag},
  address   = {D{\"u}sseldorf},
  isbn      = {978-3-18-363110-0},
  issn      = {0341-1796},
  pages     = {VIII, 140 S. : Ill., graph. Darst.},
  year      = {2000},
  language  = {de}
}
@inproceedings{ViehmannLimpertHofmannetal.2023,
  author    = {Viehmann, Tarik and Limpert, Nicolas and Hofmann, Till and Henning, Mike and Ferrein, Alexander and Lakemeyer, Gerhard},
  title     = {Winning the RoboCup logistics league with visual servoing and centralized goal reasoning},
  series = {RoboCup 2022: Robot World Cup XXV},
  booktitle = {RoboCup 2022: Robot World Cup XXV},
  editor    = {Eguchi, Amy and Lau, Nuno and Paetzel-Pr{\"u}smann, Maike and Wanichanon, Thanapat},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-031-28468-7 (Print)},
  doi       = {https://doi.org/10.1007/978-3-031-28469-4_25},
  pages     = {300 -- 312},
  year      = {2023},
  abstract  = {The RoboCup Logistics League (RCLL) is a robotics competition in a production logistics scenario in the context of a Smart Factory. In the competition, a team of three robots needs to assemble products to fulfill various orders that are requested online during the game. This year, the Carologistics team was able to win the competition with a new approach to multi-agent coordination as well as significant changes to the robot's perception unit and a pragmatic network setup using the cellular network instead of WiFi. In this paper, we describe the major components of our approach with a focus on the changes compared to the last physical competition in 2019.},
  language  = {en}
}
@inproceedings{NeugebauerBrutschyMeyeretal.2014,
  author    = {Neugebauer, Georg and Brutschy, Lucas and Meyer, Ulrike and Wetzel, Susanne},
  title     = {Privacy-preserving multi-party reconciliation secure in the malicious model},
  series = {DPM 2013, SETOP 2013: Data Privacy Management and Autonomous Spontaneous Security},
  booktitle = {DPM 2013, SETOP 2013: Data Privacy Management and Autonomous Spontaneous Security},
  editor    = {Garcia-Alfaro, Joaquin and Lioudakis, Georgios and Cuppens-Boulahia, Nora and Foley, Simon and Fitzgerald, William M.},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-642-54567-2 (Print)},
  doi       = {10.1007/978-3-642-54568-9_12},
  pages     = {178 -- 193},
  year      = {2014},
  abstract  = {The problem of fair and privacy-preserving ordered set reconciliation arises in a variety of applications like auctions, e-voting, and appointment reconciliation. While several multi-party protocols have been proposed that solve this problem in the semi-honest model, there are no multi-party protocols that are secure in the malicious model so far. In this paper, we close this gap. Our newly proposed protocols are shown to be secure in the malicious model based on a variety of novel non-interactive zero-knowledge-proofs. We describe the implementation of our protocols and evaluate their performance in comparison to protocols solving the problem in the semi-honest case.},
  language  = {en}
}
@inproceedings{NethSchubaBrodkorbetal.2023,
  author    = {Neth, Jannik and Schuba, Marko and Brodkorb, Karsten and Neugebauer, Georg and H{\"o}ner, Tim and Hack, Sacha},
  title     = {Digital forensics triage app for android},
  series = {ARES '23: Proceedings of the 18th International Conference on Availability, Reliability and Security},
  booktitle = {ARES '23: Proceedings of the 18th International Conference on Availability, Reliability and Security},
  publisher = {ACM},
  isbn      = {9798400707728},
  doi       = {10.1145/3600160.3605017},
  pages     = {6 Seiten},
  year      = {2023},
  abstract  = {Digital forensics of smartphones is of utmost importance in many criminal cases. As modern smartphones store chats, photos, videos etc. that can be relevant for investigations and as they can have storage capacities of hundreds of gigabytes, they are a primary target for forensic investigators. However, it is exactly this large amount of data that is causing problems: extracting and examining the data from multiple phones seized in the context of a case is taking more and more time. This bears the risk of wasting a lot of time with irrelevant phones while there is not enough time left to analyze a phone which is worth examination. Forensic triage can help in this case: Such a triage is a preselection step based on a subset of data and is performed before fully extracting all the data from the smartphone. Triage can accelerate subsequent investigations and is especially useful in cases where time is essential. The aim of this paper is to determine which and how much data from an Android smartphone can be made directly accessible to the forensic investigator - without tedious investigations. For this purpose, an app has been developed that can be used with extremely limited storage of data in the handset and which outputs the extracted data immediately to the forensic workstation in a human- and machine-readable format.},
  language  = {en}
}
@inproceedings{ArndtConzenElsenetal.2023,
  author    = {Arndt, Tobias and Conzen, Max and Elsen, Ingo and Ferrein, Alexander and Galla, Oskar and K{\"o}se, Hakan and Schiffer, Stefan and Tschesche, Matteo},
  title     = {Anomaly detection in the metal-textile industry for the reduction of the cognitive load of quality control workers},
  series = {PETRA '23: Proceedings of the 16th International Conference on PErvasive Technologies Related to Assistive Environments},
  booktitle = {PETRA '23: Proceedings of the 16th International Conference on PErvasive Technologies Related to Assistive Environments},
  publisher = {ACM},
  isbn      = {9798400700699},
  doi       = {10.1145/3594806.3596558},
  pages     = {535 -- 542},
  year      = {2023},
  abstract  = {This paper presents an approach for reducing the cognitive load for humans working in quality control (QC) for production processes that adhere to the 6σ -methodology. While 100\% QC requires every part to be inspected, this task can be reduced when a human-in-the-loop QC process gets supported by an anomaly detection system that only presents those parts for manual inspection that have a significant likelihood of being defective. This approach shows good results when applied to image-based QC for metal textile products.},
  language  = {en}
}
@inproceedings{ZaehlTheisWolfetal.2023,
  author    = {Z{\"a}hl, Philipp M. and Theis, Sabine and Wolf, Martin and K{\"o}hler, Klemens},
  title     = {Teamwork in software development and what personality has to do with it - an overview},
  series = {Virtual, Augmented and Mixed Reality},
  booktitle = {Virtual, Augmented and Mixed Reality},
  editor    = {Chen, Jessie Y. C. and Fragomeni, Gino},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-031-35633-9 (Print)},
  doi       = {10.1007/978-3-031-35634-6_10},
  pages     = {130 -- 153},
  year      = {2023},
  abstract  = {Due to the increasing complexity of software projects, software development is becoming more and more dependent on teams. The quality of this teamwork can vary depending on the team composition, as teams are always a combination of different skills and personality types. This paper aims to answer the question of how to describe a software development team and what influence the personality of the team members has on the team dynamics. For this purpose, a systematic literature review (n=48) and a literature search with the AI research assistant Elicit (n=20) were conducted. Result: A person's personality significantly shapes his or her thinking and actions, which in turn influences his or her behavior in software development teams. It has been shown that team performance and satisfaction can be strongly influenced by personality. The quality of communication and the likelihood of conflict can also be attributed to personality.},
  language  = {en}
}
@incollection{EggertZaehlWolfetal.2023,
  author    = {Eggert, Mathias and Z{\"a}hl, Philipp M. and Wolf, Martin R. and Haase, Martin},
  title     = {Applying leaderboards for quality improvement in software development projects},
  series = {Software Engineering for Games in Serious Contexts},
  booktitle = {Software Engineering for Games in Serious Contexts},
  editor    = {Cooper, Kendra M.L. and Bucchiarone, Antonio},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-031-33337-8 (Print)},
  doi       = {10.1007/978-3-031-33338-5_11},
  pages     = {243 -- 263},
  year      = {2023},
  abstract  = {Software development projects often fail because of insufficient code quality. It is now well documented that the task of testing software, for example, is perceived as uninteresting and rather boring, leading to poor software quality and major challenges to software development companies. One promising approach to increase the motivation for considering software quality is the use of gamification. Initial research works already investigated the effects of gamification on software developers and come to promising. Nevertheless, a lack of results from field experiments exists, which motivates the chapter at hand. By conducting a gamification experiment with five student software projects and by interviewing the project members, the chapter provides insights into the changing programming behavior of information systems students when confronted with a leaderboard. The results reveal a motivational effect as well as a reduction of code smells.},
  language  = {en}
}
@article{KowalewskiBragardHueningetal.2023,
  author    = {Kowalewski, Paul and Bragard, Michael and H{\"u}ning, Felix and De Doncker, Rik W.},
  title     = {An inexpensive Wiegand-sensor-based rotary encoder without rotating magnets for use in electrical drives},
  series = {IEEE Transactions on Instrumentation and Measurement},
  journal   = {IEEE Transactions on Instrumentation and Measurement},
  publisher = {IEEE},
  issn      = {0018-9456 (Print)},
  doi       = {10.1109/TIM.2023.3326166},
  pages     = {10 Seiten},
  year      = {2023},
  abstract  = {This paper introduces an inexpensive Wiegand-sensor-based rotary encoder that avoids rotating magnets and is suitable for electrical-drive applications. So far, Wiegand-sensor-based encoders usually include a magnetic pole wheel with rotating permanent magnets. These encoders combine the disadvantages of an increased magnet demand and a limited maximal speed due to the centripetal force acting on the rotating magnets. The proposed approach reduces the total demand of permanent magnets drastically. Moreover, the rotating part is manufacturable from a single piece of steel, which makes it very robust and cheap. This work presents the theoretical operating principle of the proposed approach and validates its benefits on a hardware prototype. The presented proof-of-concept prototype achieves a mechanical resolution of 4.5 ° by using only 4 permanent magnets, 2Wiegand sensors and a rotating steel gear wheel with 20 teeth.},
  language  = {en}
}
@inproceedings{AlhaskirTschescheLinkeetal.2023,
  author    = {Alhaskir, Mohamed and Tschesche, Matteo and Linke, Florian and Schriewer, Elisabeth and Weber, Yvonne and Wolking, Stefan and R{\"o}hrig, Rainer and Koch, Henner and Kutafina, Ekaterina},
  title     = {ECG matching: an approach to synchronize ECG datasets for data quality comparisons},
  series = {Proceedings of the 68th Annual Meeting of the German Association of Medical Informatics, Biometry, and Epidemiology e.V. (gmds) 2023},
  volume    = {307},
  booktitle = {Proceedings of the 68th Annual Meeting of the German Association of Medical Informatics, Biometry, and Epidemiology e.V. (gmds) 2023},
  editor    = {R{\"o}hrig, Rainer and Grabe, Niels and Haag, Martin and H{\"u}bner, Ursula and Sax, Ulrich and Schmidt, Carsten Oliver and Sedlmayr, Martin and Zapf, Antonia},
  publisher = {IOS Press},
  isbn      = {978-1-64368-428-4 (Print)},
  doi       = {10.3233/SHTI230718},
  pages     = {225 -- 232},
  year      = {2023},
  abstract  = {Clinical assessment of newly developed sensors is important for ensuring their validity. Comparing recordings of emerging electrocardiography (ECG) systems to a reference ECG system requires accurate synchronization of data from both devices. Current methods can be inefficient and prone to errors. To address this issue, three algorithms are presented to synchronize two ECG time series from different recording systems: Binned R-peak Correlation, R-R Interval Correlation, and Average R-peak Distance. These algorithms reduce ECG data to their cyclic features, mitigating inefficiencies and minimizing discrepancies between different recording systems. We evaluate the performance of these algorithms using high-quality data and then assess their robustness after manipulating the R-peaks. Our results show that R-R Interval Correlation was the most efficient, whereas the Average R-peak Distance and Binned R-peak Correlation were more robust against noisy data.},
  language  = {en}
}