@inproceedings{WolfLenz2015,
  author    = {Wolf, Martin R. and Lenz, Laura L.},
  title     = {The economic effectiveness of serious games in the healthcare environment : application and evaluation of the Comparative Transformation Model (CTM)},
  series = {IEEE 3rd International Conference on Serious Games and Applications for Health : SeGAH 2014 ; Rio de Janeiro, Brazil, May 14 - 16},
  booktitle = {IEEE 3rd International Conference on Serious Games and Applications for Health : SeGAH 2014 ; Rio de Janeiro, Brazil, May 14 - 16},
  publisher = {IEEE [u.a.]},
  address   = {Piscataway, NJ},
  isbn      = {978-1-4799-4823-9},
  doi       = {10.1109/SeGAH.2014.7067089},
  pages     = {135 -- 142},
  year      = {2015},
  language  = {en}
}
@article{WolfAltgen2013,
  author    = {Wolf, Martin R. and Altgen, Jannik},
  title     = {IT Service Management in der Region Aachen : White Paper},
  pages     = {1 -- 13},
  year      = {2013},
  language  = {de}
}
@article{FerreinMeyer2012,
  author    = {Ferrein, Alexander and Meyer, Thomas},
  title     = {A Brief Overview of Artificial Intelligence in South Africa},
  series = {AI Magazine},
  volume    = {33},
  journal   = {AI Magazine},
  number    = {1},
  publisher = {AAAI},
  address   = {Menlo Park},
  issn      = {0738-4602},
  doi       = {10.1609/aimag.v33i1.2357},
  pages     = {99 -- 101},
  year      = {2012},
  abstract  = {South Africa in recent years is the establishment of a number of research hubs involved in AI activities ranging from mobile robotics and computational intelligence, to knowledge representation and reasoning, and human language technologies. In this survey we take the reader through a quick tour of the research being conducted at these hubs, and touch on an initiative to maintain and extend the current level of interest in AI research in the country.},
  language  = {en}
}
@inproceedings{RingbeckSchwarteBuxbaum1999,
  author    = {Ringbeck, Thorsten and Schwarte, Rudolf and Buxbaum, Bernd},
  title     = {Introduction of a new opto-electrical phase-locked loop in CMOS technology: the PMD-PLL},
  series = {Optical wireless communications II / [SPIE Conference on Optical Wireless Communications II], 22 September 1999, Boston, Massachusetts. - (SPIE proceedings series ; 3850)},
  booktitle = {Optical wireless communications II / [SPIE Conference on Optical Wireless Communications II], 22 September 1999, Boston, Massachusetts. - (SPIE proceedings series ; 3850)},
  editor    = {Korevaar, Eric John},
  publisher = {SPIE},
  address   = {Bellingham, Wash.},
  isbn      = {0-8194-3443-4},
  issn      = {0038-7355},
  pages     = {108 -- 116},
  year      = {1999},
  language  = {en}
}
@article{BragardvanHoekDeDoncker2012,
  author    = {Bragard, Michael and van Hoek, H. and De Doncker, R. W.},
  title     = {A major design step in IETO concept realization that allows overcurrent protection and pushes limits of switching performance},
  series = {IEEE transactions on power electronics},
  volume    = {27},
  journal   = {IEEE transactions on power electronics},
  number    = {9},
  publisher = {IEEE},
  address   = {New York},
  issn      = {0885-8993},
  doi       = {10.1109/TPEL.2012.2189136},
  pages     = {4163 -- 4171},
  year      = {2012},
  abstract  = {This paper presents the latest prototype of the integrated emitter turn-off thyristor concept, which potentially ranks among thyristor high-power devices like the gate turn-off thyristor and the integrated gate-commutated thyristor (IGCT). Due to modifications of the external driver stage and mechanical press-pack design optimization, this prototype allows for full device characterization. The turn-off capability was increased to 1600 A with an active silicon area of 823mm2 . This leads to a transient peak power of 672.1kW/cm² . Within this paper, measurements and concept assessment are presented and a comparison to state-of-the-art IGCT devices is provided.},
  language  = {en}
}
@inproceedings{BragardGottschlichDeDoncker2011,
  author    = {Bragard, Michael and Gottschlich, J. and De Doncker, R. W.},
  title     = {Design and realization of a credit card size driver stage for high power thyristor based devices with integrated MOS structure},
  series = {2011 IEEE 8th International Conference on Power Electronics and ECCE Asia (ICPE \& ECCE 2011) : Jeju, South Korea, 30 May 2011 - 3 June 2011 / [co-sponsored by the Korean Institute of Power Electronics ...]},
  booktitle = {2011 IEEE 8th International Conference on Power Electronics and ECCE Asia (ICPE \& ECCE 2011) : Jeju, South Korea, 30 May 2011 - 3 June 2011 / [co-sponsored by the Korean Institute of Power Electronics ...]},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  isbn      = {978-1-61284-958-4 (Print)},
  doi       = {10.1109/ICPE.2011.5944661},
  pages     = {1182 -- 1189},
  year      = {2011},
  language  = {en}
}
@book{GunnarBartonBeigeletal.2017,
  author    = {Gunnar, Auth and Barton, Thomas and Beigel, Stefan and Bensberg, Frank and Brehm, Lars and Wolf, Martin R.},
  title     = {Prozesse, Technologie, Anwendungen, Systeme und Management 2017},
  editor    = {Barton, Thomas and Herrmann, Frank and Meister, Vera G. and M{\"u}ller, Christian and Seel, Christian},
  publisher = {Mana-Buch},
  address   = {Heide},
  isbn      = {978-3-944330-56-3},
  pages     = {297 Seiten},
  year      = {2017},
  language  = {de}
}
@inproceedings{LosseGehrkeUllrichetal.2022,
  author    = {Losse, Ann-Kathrin and Gehrke, Melanie and Ullrich, Andr{\´e} and Czarnecki, Christian and Sultanow, Eldar and Breithaupt, Carsten and Koch, Christian},
  title     = {Entwicklung einer Open-Data-Referenzarchitektur f{\"u}r die Luftfahrtindustrie},
  series = {INFORMATIK 2022 - Informatik in den Naturwissenschaften, Proceedings},
  booktitle = {INFORMATIK 2022 - Informatik in den Naturwissenschaften, Proceedings},
  publisher = {GI - Gesellschaft f{\"u}r Informatik},
  address   = {Bonn},
  isbn      = {978-3-88579-720-3},
  issn      = {1617-5468},
  doi       = {10.18420/inf2022_103},
  pages     = {1203 -- 1209},
  year      = {2022},
  abstract  = {Open Data impliziert die freie Zug{\"a}nglichkeit, Verf{\"u}gbarkeit und Wiederverwendbarkeit von Datens{\"a}tzen. Obwohl hochwertige Datens{\"a}tze {\"o}ffentlich verf{\"u}gbar sind, ist der Zugang zu diesen und die Transparenz {\"u}ber die Formate nicht immer gegeben. Dies mindert die optimale Nutzung des Potenzials zur Wertsch{\"o}pfung, trotz der vorherrschenden Einigkeit {\"u}ber ihre Chancen. Denn Open Data erm{\"o}glicht das Vorantreiben von Compliance-Themen wie Transparenz und Rechenschaftspflicht bis hin zur F{\"o}rderung von Innovationen. Die Nutzung von Open Data erfordert Mut und eine gemeinsame Anstrengung verschiedener Akteure und Branchen. Im Rahmen des vorliegenden Beitrags werden auf Grundlage des Design Science-Ansatzes eine Open Data Capability Map sowie darauf aufbauend eine Datenarchitektur f{\"u}r Open Data in der Luftfahrtindustrie an einem Beispiel entwickelt.},
  language  = {de}
}
@article{MartinFrauenrathOezerdemetal.2011,
  author    = {Martin, Conrad and Frauenrath, Tobias and {\"O}zerdem, Celal and Renz, Wolfgang and Niendorf, Thoralf},
  title     = {Development and evaluation of a small and mobile Magneto Alert Sensor (MALSE) to support safety requirements for magnetic resonance imaging},
  series = {European Radiology},
  volume    = {21},
  journal   = {European Radiology},
  publisher = {Springer},
  address   = {Berlin, Heidelberg},
  issn      = {1432-1084},
  doi       = {10.1007/s00330-011-2153-z},
  pages     = {2187 -- 2192},
  year      = {2011},
  abstract  = {Objective The purpose of this study is to (i) design a small and mobile Magnetic field ALert SEnsor (MALSE), (ii) to carefully evaluate its sensors to their consistency of activation/deactivation and sensitivity to magnetic fields, and (iii) to demonstrate the applicability of MALSE in 1.5 T, 3.0 T and 7.0 T MR fringe field environments. Methods MALSE comprises a set of reed sensors, which activate in response to their exposure to a magnetic field. The activation/deactivation of reed sensors was examined by moving them in/out of the fringe field generated by 7TMR. Results The consistency with which individual reed sensors would activate at the same field strength was found to be 100\% for the setup used. All of the reed switches investigated required a substantial drop in ambient magnetic field strength before they deactivated. Conclusions MALSE is a simple concept for alerting MRI staff to a ferromagnetic object being brought into fringe magnetic fields which exceeds MALSEs activation magnetic field. MALSE can easily be attached to ferromagnetic objects within the vicinity of a scanner, thus creating a barrier for hazardous situations induced by ferromagnetic parts which should not enter the vicinity of an MR-system to occur.},
  language  = {en}
}
@misc{BragardHueningKowalewski2023,
  author    = {Bragard, Michael and H{\"u}ning, Felix and Kowalewski, Paul},
  title     = {Vorrichtung zur Relativlagenbestimmung [Offenlegungschrift]},
  year      = {2023},
  abstract  = {Die Erfindung betrifft eine Vorrichtung zur Bestimmung einer Relativlage zwischen einem feststehenden Teil und einem zu demselben in eine Bewegungsrichtung bewegbaren beweglichen Teil, wobei der feststehende Teil mit einem Wiegandsensor versehen ist, wobei der Wiegandsensor zwischen zwei gegenpolig zueinander ausgebildeten Permanentmagneten angeordnet ist und dass der bewegliche Teil eine Mehrzahl von beabstandet zueinander angeordneten Magnetisierungsstegen aus einem magnetisch leitenden Material aufweist, die in der Bewegungsrichtung zumindest eine gleich große Erstreckung aufweisen wie der Permanentmagnet, dass ein Abstand zwischen benachbarten Magnetisierungsstegen derart gew{\"a}hlt ist, dass in einer ersten Relativlage ein erster Permanentmagnet von einem der Magnetisierungsstege {\"u}berdeckt ist und ein zweiter Permanentmagnet nicht von einem der Magnetisierungsstege {\"u}berdeckt ist.},
  language  = {de}
}
@inproceedings{PenneProfittlichRingbecketal.2010,
  author    = {Penne, Jochen and Profittlich, Martin and Ringbeck, Thorsten and Buxbaum, Bernd},
  title     = {Touchless detailed 3D scan of human hand anatomy using time-of-flight cameras},
  series = {Proceedings of the International Conference on 3D Body Scanning Technologies : Lugano, Switzerland, 19-20 October 2010},
  booktitle = {Proceedings of the International Conference on 3D Body Scanning Technologies : Lugano, Switzerland, 19-20 October 2010},
  editor    = {D, Nicola D'Apuzzo},
  publisher = {Hometrica Consulting},
  address   = {Z{\"u}rich},
  isbn      = {978-3-033-02714-5},
  pages     = {361 -- 369},
  year      = {2010},
  language  = {en}
}
@techreport{LessenichRitzWallenborn2014,
  author    = {Leßenich, Nina and Ritz, Thomas and Wallenborn, Ramona},
  title     = {Prototyping zur Verbesserung der Benutzerfreundlichkeit mobiler Software : Potenziale benutzerfreundlicher Software-Entwicklung ; Info-Brosch{\"u}re},
  publisher = {eBusiness-Lotse},
  address   = {Aachen},
  pages     = {7 S. : Ill., graph. Darst.},
  year      = {2014},
  abstract  = {Mobile Anwendungen nehmen mit der Verbreitung von Smartphones zu. Die Akzeptanz der Nutzer bestimmt den Erfolg solcher mobiler Applikationen dabei maßgeblich. Um diese Anerkennung zu schaffen, ist eine m{\"o}glichst hohe Gebrauchstauglichkeit, auch Usability genannt, notwendig. Die Informationsbrosch{\"u}re „Prototyping zur Verbesserung der Benutzerfreundlichkeit mobiler Software" richtet sich an Personen, die an der Gestaltung und entwicklung von (mobiler) Software beteiligt sind. In dieser Brosch{\"u}re werden m{\"o}gliche Potenziale im Bereich einer effizienten und benutzerzentrierten Software-Entwicklung aufgezeigt.},
  language  = {de}
}
@misc{HilgenstockLangeRiedeletal.2006,
  author    = {Hilgenstock, J{\"o}rg and Lange, Robert and Riedel, Helmut and Ringbeck, Thorsten},
  title     = {Verfahren und Entfernungsmessvorrichtung zum Bestimmen der Entfernung zwischen einem Objekt und der Vorrichtung : [Offenlegungsschrift / Europ{\"a}ische Patentanmeldung]},
  publisher = {Deutsches Patent- und Markenamt / Europ{\"a}isches Patentamt},
  address   = {M{\"u}nchen / Den Hague},
  year      = {2006},
  language  = {de}
}
@article{RitzPisarczykSachtlebenetal.2014,
  author    = {Ritz, Thomas and Pisarczyk, Rafael and Sachtleben, Johanna and Leßenich, Nina},
  title     = {Usability Engineering maßgeschneidert : Modellbaukasten zur Entwicklung gebrauchstauglicher mobiler Software},
  series = {Wissenschaft trifft Praxis},
  volume    = {1},
  journal   = {Wissenschaft trifft Praxis},
  number    = {1},
  publisher = {Begleitforschung Mittelstand-Digital c/o WIK-Consult GmbH},
  address   = {Bad Honnef},
  issn      = {2198-8544 (Print)},
  pages     = {79 -- 88},
  year      = {2014},
  language  = {de}
}
@article{WallenbornRitz2014,
  author    = {Wallenborn, Ramona and Ritz, Thomas},
  title     = {Mobilit{\"a}t miteinander teilen : st{\"a}dtisches eCarsharing in einer vernetzten Gesellschaft ; [vernetztes Fahren von morgen]},
  series = {Neue Mobilit{\"a}t : das Magazin vom Bundesverband eMobilit{\"a}t},
  volume    = {5},
  journal   = {Neue Mobilit{\"a}t : das Magazin vom Bundesverband eMobilit{\"a}t},
  number    = {14 (Herbstausg.)},
  publisher = {Bundesverband eMobilit{\"a}t BEM},
  address   = {Berlin},
  issn      = {2191-5636},
  pages     = {92 -- 95},
  year      = {2014},
  language  = {de}
}
@techreport{RahierRitzWallenborn2014,
  author    = {Rahier, Michael and Ritz, Thomas and Wallenborn, Ramona},
  title     = {Elektromobilit{\"a}t in einer vernetzten Welt : Potenziale f{\"u}r die IT-Branche bei der Organisation der Mobilit{\"a}t von morgen ; Info-Brosch{\"u}re},
  publisher = {eBusiness-Lotse},
  address   = {Aachen},
  pages     = {9 S. : Ill., graph. Darst.},
  year      = {2014},
  abstract  = {Die Informationsbrosch{\"u}re „Elektromobilit{\"a}t in einer vernetzten Welt" richtet sich an IT-Dienstleister. In dieser Brosch{\"u}re werden m{\"o}gliche Potenziale im Bereich der Elektromobilit{\"a}t aufgezeigt. Die Mobilit{\"a}t der Zukunft ist eine interdisziplin{\"a}re Angelegenheit und kein reines Automotive-Thema mehr. Beispiele wie Mobilit{\"a}tsmanagement, eCommerce und Individualisierung sind im Mobilit{\"a}tsbereich f{\"u}r die IT-Branche relevant.},
  language  = {de}
}
@inproceedings{SchwarteBuxbaumHeinoletal.1998,
  author    = {Schwarte, Rudolf and Buxbaum, Bernd and Heinol, Horst-Guenther and Xu, Zhanping and Ringbeck, Thorsten and Zang, Zhigang},
  title     = {Novel 3D-vision systems based on layout optimized PMD-structures},
  series = {Proceedings / OPTO 98, Internationaler Kongress und Fachausstellung f{\"u}r Optische Sensorik, Messtechnik und Elektronik, 18. - 20. Mai 1998, Kongreßzentrum Erfurt},
  booktitle = {Proceedings / OPTO 98, Internationaler Kongress und Fachausstellung f{\"u}r Optische Sensorik, Messtechnik und Elektronik, 18. - 20. Mai 1998, Kongreßzentrum Erfurt},
  publisher = {ACS Organisations GmbH},
  address   = {Wunsdorf},
  pages     = {197 -- 202},
  year      = {1998},
  language  = {en}
}
@inproceedings{LenzWolf2014,
  author    = {Lenz, Laura L. and Wolf, Martin R.},
  title     = {Economic evaluation of serious games with the comparative assessment framework COSEGA},
  series = {The shift from teaching to learning : individual, collective and organizational learning through gaming simulation ; proceedings of the 45th conference of the International Simulation and Gaming Association, Dornbirn 2014},
  booktitle = {The shift from teaching to learning : individual, collective and organizational learning through gaming simulation ; proceedings of the 45th conference of the International Simulation and Gaming Association, Dornbirn 2014},
  editor    = {Kritz, Willy Christian},
  publisher = {Bertelsmann},
  address   = {[Bielefeld]},
  isbn      = {978-3-7639-5422-3},
  pages     = {374 -- 386},
  year      = {2014},
  language  = {en}
}
@article{SchulteTiggesFoersterNikolovskietal.2022,
  author    = {Schulte-Tigges, Joschua and F{\"o}rster, Marco and Nikolovski, Gjorgji and Reke, Michael and Ferrein, Alexander and Kaszner, Daniel and Matheis, Dominik and Walter, Thomas},
  title     = {Benchmarking of various LiDAR sensors for use in self-driving vehicles in real-world environments},
  series = {Sensors},
  volume    = {22},
  journal   = {Sensors},
  number    = {19},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {1424-8220},
  doi       = {10.3390/s22197146},
  pages     = {20 Seiten},
  year      = {2022},
  abstract  = {Abstract In this paper, we report on our benchmark results of the LiDAR sensors Livox Horizon, Robosense M1, Blickfeld Cube, Blickfeld Cube Range, Velodyne Velarray H800, and Innoviz Pro. The idea was to test the sensors in different typical scenarios that were defined with real-world use cases in mind, in order to find a sensor that meet the requirements of self-driving vehicles. For this, we defined static and dynamic benchmark scenarios. In the static scenarios, both LiDAR and the detection target do not move during the measurement. In dynamic scenarios, the LiDAR sensor was mounted on the vehicle which was driving toward the detection target. We tested all mentioned LiDAR sensors in both scenarios, show the results regarding the detection accuracy of the targets, and discuss their usefulness for deployment in self-driving cars.},
  language  = {en}
}
@inproceedings{RitzIzquierdoTelloDamm2014,
  author    = {Ritz, Thomas and Izquierdo Tello, C{\´e}sar and Damm, Sebastian},
  title     = {Connecting a pedelec to the cloud as basis for gamification in multi modal mobility planning},
  series = {MobileCloud 2014 : 2nd IEEE International Conference on Mobile Cloud Computing, Services, and Engineering Oxford, United Kingdom 7-10 April 2014},
  booktitle = {MobileCloud 2014 : 2nd IEEE International Conference on Mobile Cloud Computing, Services, and Engineering Oxford, United Kingdom 7-10 April 2014},
  publisher = {IEEE Service Center},
  address   = {Piscataway, NJ},
  isbn      = {978-1-4799-2504-9},
  doi       = {10.1109/MobileCloud.2014.25},
  pages     = {101 -- 108},
  year      = {2014},
  language  = {en}
}
@article{FrauenrathFuchsDieringeretal.2012,
  author    = {Frauenrath, Tobias and Fuchs, Katharina and Dieringer, Matthias A. and {\"O}zerdem, Celal and Patel, Nishan and Renz, Wolfgang and Greiser, Andreas and Elgeti, Thomas and Niendorf, Thoralf},
  title     = {Detailing the use of magnetohydrodynamic effects for synchronization of MRI with the cardiac cycle: A feasibility study},
  series = {Journal of Magnetic Resonance Imaging},
  volume    = {36},
  journal   = {Journal of Magnetic Resonance Imaging},
  number    = {2},
  publisher = {Wiley-Liss},
  address   = {New York},
  issn      = {1522-2586},
  doi       = {10.1002/jmri.23634},
  pages     = {364 -- 372},
  year      = {2012},
  abstract  = {Purpose: To investigate the feasibility of using magnetohydrodynamic (MHD) effects for synchronization of magnetic resonance imaging (MRI) with the cardiac cycle. Materials and Methods: The MHD effect was scrutinized using a pulsatile flow phantom at B0 = 7.0 T. MHD effects were examined in vivo in healthy volunteers (n = 10) for B0 ranging from 0.05-7.0 T. Noncontrast-enhanced MR angiography (MRA) of the carotids was performed using a gated steady-state free-precession (SSFP) imaging technique in conjunction with electrocardiogram (ECG) and MHD synchronization. Results: The MHD potential correlates with flow velocities derived from phase contrast MRI. MHD voltages depend on the orientation between B0 and the flow of a conductive fluid. An increase in the interelectrode spacing along the flow increases the MHD potential. In vivo measurement of the MHD effect provides peak voltages of 1.5 mV for surface areas close to the common carotid artery at B0 = 7.0 T. Synchronization of MRI with the cardiac cycle using MHD triggering is feasible. MHD triggered MRA of the carotids at 3.0 T showed an overall image quality and richness of anatomic detail, which is comparable to ECG-triggered MRAs. Conclusion: This feasibility study demonstrates the use of MHD effects for synchronization of MR acquisitions with the cardiac cycle. J. Magn. Reson. Imaging 2012;36:364-372. © 2012 Wiley Periodicals, Inc.},
  language  = {en}
}
@misc{HueningBackes2022,
  author    = {H{\"u}ning, Felix and Backes, Andreas},
  title     = {Wiegand-Modul},
  year      = {2022},
  abstract  = {Ein Wiegand-Modul (110;210;310) umfassend- eine Sensorspule (112;212;312),- einen ersten Wiegand-Draht (116a;216a;316a), der zumindest teilweise innerhalb der Sensorspule (112;212;312) angeordnet ist, und- einen zweiten Wiegand-Draht (116b;216b;316b), der zumindest teilweise innerhalb der Sensorspule (112;212;312) angeordnet ist und sich im Wesentlichen parallel zu dem ersten Wiegand-Draht (116a;216a;316a) erstreckt, ist bekannt.Um eine effiziente Ausnutzung der durch die Ummagnetisierung der Wiegand-Dr{\"a}hte (116a,116b;216a,216b;316a,316b) in die Sensorspule (112;212;312) induzierten elektrischen Energie zu erm{\"o}glichen, sind der erste Wiegand-Draht (116a;216a;316a) und der zweite Wiegand-Draht (116b;216b;316b) bezogen auf eine axiale Richtung der Sensorspule (112;212;312) versetzt zueinander angeordnet.},
  language  = {de}
}
@inproceedings{WittigRuettersBragard2024,
  author    = {Wittig, M. and R{\"u}tters, Ren{\´e} and Bragard, Michael},
  title     = {Application of RL in control systems using the example of a rotatory inverted pendulum},
  series = {Tagungsband AALE 2024 : Fit f{\"u}r die Zukunft: praktische L{\"o}sungen f{\"u}r die industrielle Automation},
  booktitle = {Tagungsband AALE 2024 : Fit f{\"u}r die Zukunft: praktische L{\"o}sungen f{\"u}r die industrielle Automation},
  editor    = {Reiff-Stephan, J{\"o}rg and J{\"a}kel, Jens and Schwarz, Andr{\´e}},
  publisher = {le-tex publishing services GmbH},
  address   = {Leipzig},
  isbn      = {978-3-910103-02-3},
  doi       = {10.33968/2024.53},
  pages     = {241 -- 248},
  year      = {2024},
  abstract  = {In this paper, the use of reinforcement learning (RL) in control systems is investigated using a rotatory inverted pendulum as an example. The control behavior of an RL controller is compared to that of traditional LQR and MPC controllers. This is done by evaluating their behavior under optimal conditions, their disturbance behavior, their robustness and their development process. All the investigated controllers are developed using MATLAB and the Simulink simulation environment and later deployed to a real pendulum model powered by a Raspberry Pi. The RL algorithm used is Proximal Policy Optimization (PPO). The LQR controller exhibits an easy development process, an average to good control behavior and average to good robustness. A linear MPC controller could show excellent results under optimal operating conditions. However, when subjected to disturbances or deviations from the equilibrium point, it showed poor performance and sometimes instable behavior. Employing a nonlinear MPC Controller in real time was not possible due to the high computational effort involved. The RL controller exhibits by far the most versatile and robust control behavior. When operated in the simulation environment, it achieved a high control accuracy. When employed in the real system, however, it only shows average accuracy and a significantly greater performance loss compared to the simulation than the traditional controllers. With MATLAB, it is not yet possible to directly post-train the RL controller on the Raspberry Pi, which is an obstacle to the practical application of RL in a prototyping or teaching setting. Nevertheless, RL in general proves to be a flexible and powerful control method, which is well suited for complex or nonlinear systems where traditional controllers struggle.},
  language  = {en}
}
@techreport{PisarczykRitzWallenborn2014,
  author    = {Pisarczyk, Rafael and Ritz, Thomas and Wallenborn, Ramona},
  title     = {Unterschiedliche Entwicklungsans{\"a}tze von Multiplattform-Anwendungen : Markt{\"u}bersicht},
  publisher = {eBusiness-Lotse},
  address   = {Aachen},
  pages     = {15 S. : Ill., graph. Darst.},
  year      = {2014},
  abstract  = {Die Markt{\"u}bersicht „Unterschiedliche Entwicklungsans{\"a}tze von Multiplattform-Anwendungen" richtet sich an IT-Dienstleister, Entwickler und IT-Abteilungen von Unternehmen, die Multiplattform Anwendungen entwickeln. In dieser Markt{\"u}bersicht werden verschiedene Entwicklungsans{\"a}tze beschrieben und ihre jeweiligen Vor- und Nachteile aufgezeigt.},
  language  = {de}
}
@inproceedings{KramerBragardRitzetal.2024,
  author    = {Kramer, Pia and Bragard, Michael and Ritz, Thomas and Ferfer, Ute and Schiffers, Tim},
  title     = {Visualizing, Enhancing and Predicting Students' Success through ECTS Monitoring},
  series = {2024 IEEE Global Engineering Education Conference (EDUCON)},
  booktitle = {2024 IEEE Global Engineering Education Conference (EDUCON)},
  publisher = {IEEE},
  address   = {New York, NY},
  issn      = {2165-9559},
  doi       = {10.1109/EDUCON60312.2024.10578652},
  pages     = {5 Seiten},
  year      = {2024},
  abstract  = {This paper serves as an introduction to the ECTS monitoring system and its potential applications in higher education. It also emphasizes the potential for ECTS monitoring to become a proactive system, supporting students by predicting academic success and identifying groups of potential dropouts for tailored support services. The use of the nearest neighbor analysis is suggested for improving data analysis and prediction accuracy.},
  language  = {en}
}
@incollection{SchultLosseCzarneckietal.2023,
  author    = {Schult, Prince Garcia and Losse, Ann-Kathrin and Czarnecki, Christian and Sultanow, Eldar},
  title     = {Proposing a Framework to address the Sustainable Development Goals},
  series = {EnviroInfo 2023},
  booktitle = {EnviroInfo 2023},
  publisher = {GI - Gesellschaft f{\"u}r Informatik},
  address   = {Bonn},
  isbn      = {978-3-88579-736-4},
  issn      = {1617-5468},
  doi       = {10.18420/env2023-022},
  pages     = {243 -- 249},
  year      = {2023},
  abstract  = {Reducing poverty, protecting the planet, and improving life on earth for everyone are the essential goals of the "2030 Agenda for Sustainable Development"committed by the United Nations (UN). Achieving those goals will require technological innovation as well as their implementation in almost all areas of our business and day-to-day life. This paper proposes a high-level framework that collects and structures different uses cases addressing the goals defined by the UN. Hence, it contributes to the discussion by proposing technical innovations that can be used to achieve those goals. As an example, the goal "Climate Action{\"i}s discussed in detail by describing use cases related to tackling biodiversity loss in order to conservate ecosystems.},
  language  = {en}
}
@inproceedings{BuxbaumHessRingbeck2001,
  author    = {Buxbaum, Bernd and Hess, Holger and Ringbeck, Thorsten},
  title     = {The photonic mixer device : new perspectives in optical wireless communication},
  series = {International Workshop on Optical MEMS and Integrated Optics : Universit{\"a}t Dortmund, Universit{\"a}tskolleg Bommerholz, 11. \& 12. June 2001},
  booktitle = {International Workshop on Optical MEMS and Integrated Optics : Universit{\"a}t Dortmund, Universit{\"a}tskolleg Bommerholz, 11. \& 12. June 2001},
  editor    = {Voges, Edgar},
  publisher = {Univ.},
  address   = {Dortmund},
  pages     = {(12)1 -- (12)5},
  year      = {2001},
  language  = {en}
}
@inproceedings{RingbeckAlbrechtFrey2003,
  author    = {Ringbeck, Thorsten and Albrecht, M. and Frey, J.},
  title     = {Time-of-Flight 3D-camera for autonomous navigation and industrial automation},
  series = {Proceedings : 11th international conference, 13 - 15 May 2003, Exhibition Centre Nuremberg, Germany ; an event of the Association for Sensor Technology, AMA},
  booktitle = {Proceedings : 11th international conference, 13 - 15 May 2003, Exhibition Centre Nuremberg, Germany ; an event of the Association for Sensor Technology, AMA},
  editor    = {Lerch, Reinhard},
  edition   = {CD-ROM-Ausg.},
  publisher = {AMA Service},
  address   = {Wunstorf/Germany},
  year      = {2003},
  language  = {en}
}
@inproceedings{HagebeukerRingbeckFrydlewiczetal.2007,
  author    = {Hagebeuker, Bianca and Ringbeck, Thorsten and Frydlewicz, Paul and Jesorsky, Oliver and S{\"u}nkel, Thomas},
  title     = {PMD-Sensoren als Schl{\"u}sselkomponenten f{\"u}r die mehrdimensionale Umfelderfassung des Fahrzeuginnenraums},
  series = {Begleittexte zum Entwicklerforum KFZ-Elektronik \& FlexRay Solution Day : 15.Mai 2007, Ludwigsburg},
  booktitle = {Begleittexte zum Entwicklerforum KFZ-Elektronik \& FlexRay Solution Day : 15.Mai 2007, Ludwigsburg},
  editor    = {Grote, Caspar},
  publisher = {WEKA-Fachzeitschr.-Verl.},
  address   = {Poing},
  pages     = {287 -- 296},
  year      = {2007},
  language  = {en}
}
@inproceedings{GrothofSchwarteBuxbaumetal.2002,
  author    = {Grothof, M. and Schwarte, Rudolf and Buxbaum, Bernd and Ringbeck, Thorsten},
  title     = {Product monitoring with MSM-PMD-Array},
  series = {Proceedings / OPTO 2002 : an event of the Association for Sensor Technology AMA ; 14 - 16 May 2002, Exhibition Centre Erfurt, Germany / International Conference Optoelectronics, Optical Sensors \& Measuring Techniques},
  booktitle = {Proceedings / OPTO 2002 : an event of the Association for Sensor Technology AMA ; 14 - 16 May 2002, Exhibition Centre Erfurt, Germany / International Conference Optoelectronics, Optical Sensors \& Measuring Techniques},
  editor    = {Wagner, Elmar},
  publisher = {AMA Service GmbH},
  address   = {Wunsdorf},
  pages     = {41 -- 47},
  year      = {2002},
  language  = {en}
}
@inproceedings{BuxbaumSchwarteRingbecketal.2001,
  author    = {Buxbaum, Bernd and Schwarte, Rudolf and Ringbeck, Thorsten and Grothof, Markus and Sluiter, A. and Frey, Jochen and Hildebrand, M. and David, Klaus},
  title     = {Wireless LAN based on optical CDMA using a new high-speed correlation receiver (MSM-PMD)},
  series = {Optical wireless communications IV : 21-22 August, 2001, Denver, USA. - (SPIE proceedings series ; 4530)},
  booktitle = {Optical wireless communications IV : 21-22 August, 2001, Denver, USA. - (SPIE proceedings series ; 4530)},
  editor    = {Korevaar, Eric John},
  publisher = {SPIE},
  address   = {Bellingham, Wash.},
  isbn      = {0-8194-4254-2},
  doi       = {10.1117/12.449808},
  pages     = {168 -- 178},
  year      = {2001},
  language  = {en}
}
@inproceedings{NoetzoldUphuesWegeneretal.2013,
  author    = {N{\"o}tzold, K. and Uphues, A. and Wegener, R. and Fink, K. and Bragard, Michael and Griessel, R. and Soter, S.},
  title     = {Inverter based test setup for LVRT verification of a full-scale 2 MW wind power converter},
  series = {15th European Conference on Power Electronics and Applications (EPE), 2013 : 2 - 6 Sept. 2013, Lille, France / [EPE Association; PELS, IEEE Power Electronics Society]},
  booktitle = {15th European Conference on Power Electronics and Applications (EPE), 2013 : 2 - 6 Sept. 2013, Lille, France / [EPE Association; PELS, IEEE Power Electronics Society]},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  isbn      = {978-1-4799-0115-9 (Online-Ausg.)},
  doi       = {10.1109/EPE.2013.6634752},
  pages     = {1037 -- 1042},
  year      = {2013},
  language  = {en}
}
@incollection{NiendorfWinterFrauenrath2012,
  author    = {Niendorf, Thoralf and Winter, Lukas and Frauenrath, Tobias},
  title     = {Electrocardiogram in an MRI environment: Clinical needs, practical considerations, safety implications, technical solutions and fFuture directions},
  series = {Advances in Electrocardiograms - Methods and Analysis},
  booktitle = {Advances in Electrocardiograms - Methods and Analysis},
  editor    = {Millis, Richard},
  publisher = {IntechOpen},
  address   = {London},
  isbn      = {978-953-307-923-3 (print)},
  doi       = {10.5772/24340},
  pages     = {309 -- 324},
  year      = {2012},
  language  = {en}
}
@techreport{RitzSiekmannWallenborn2014,
  author    = {Ritz, Thomas and Siekmann, Kirsten and Wallenborn, Ramona},
  title     = {3D-Druck - Prozessmanagement f{\"u}r individualisierte Massenprodukte : Wie k{\"o}nnen Fertigungsdienstleister in die endkundengerichtete Produktion integriert werden? ; Info-Brosch{\"u}re},
  publisher = {eBusiness-Lotse},
  address   = {Aachen},
  pages     = {16 S. : Ill., graph. Darst.},
  year      = {2014},
  abstract  = {Die Informationsbrosch{\"u}re „3D-Druck - Prozessmanagement f{\"u}r individualisierte Massenprodukte" richtet sich an 3D-Druckdienstleister, die additive Fertigungsverfahren (Additive Manufacturing) nutzen, sowie an IT-Dienstleister, die eine Plattform f{\"u}r den Datenaustausch und die Individualisierung anbieten. Mit der additiven 3D-Drucktechnologie erfolgt die Fertigung von Produkten durch einen schichtweisen Aufbau. In dieser Brosch{\"u}re werden m{\"o}gliche Potenziale im Bereich der Herstellung mittels additiver Fertigungsverfahren aufgezeigt.},
  language  = {de}
}
@inproceedings{EllerwegRitz2008,
  author    = {Ellerweg, Roland and Ritz, Thomas},
  title     = {Tool supported requirements analysis for the user centered development of mobile enterprise software},
  series = {Proceeding of Wireless Applications and Computing 2008 and Telecommunications, Networks and Systems 2008 : MCCSIS '08 ; IADIS Multi Conference on Computer Science and Information Systems ; 22 - 24 July 2008, Amsterdam, The Netherlands},
  booktitle = {Proceeding of Wireless Applications and Computing 2008 and Telecommunications, Networks and Systems 2008 : MCCSIS '08 ; IADIS Multi Conference on Computer Science and Information Systems ; 22 - 24 July 2008, Amsterdam, The Netherlands},
  editor    = {Roth, J{\"o}rg},
  publisher = {IADIS Press},
  address   = {[Lisboa]},
  isbn      = {978-972-8924-62-1},
  pages     = {160 -- 162},
  year      = {2008},
  abstract  = {A user centered development method has proved satisfactory for the development of mobile enterprise software. To make use of this method, detailed information about the user and the place where the user interacts with his mobile device is required. This article describes how both can be modeled by a stereotypical and conceptual extended UML extension. Finally, a software tool is presented that supports the developed UML extension.},
  language  = {en}
}
@article{BragardBragard2012,
  author    = {Bragard, G. and Bragard, Michael},
  title     = {Ein kosteng{\"u}nstiges, universelles Modellbauinterface},
  series = {Der mathematische und naturwissenschaftliche Unterricht : MNU ; Organ des Deutschen Vereins zur F{\"o}rderung des Mathematischen und Naturwissenschaftlichen Unterrichts e.V.},
  volume    = {65},
  journal   = {Der mathematische und naturwissenschaftliche Unterricht : MNU ; Organ des Deutschen Vereins zur F{\"o}rderung des Mathematischen und Naturwissenschaftlichen Unterrichts e.V.},
  number    = {5},
  publisher = {Seeberger},
  address   = {Neuss},
  issn      = {0025-5866},
  pages     = {290 -- 293},
  year      = {2012},
  abstract  = {Wir stellen einen USB-Baustein vor, der eine kosteng{\"u}nstige und universelle M{\"o}glichkeit schafft , im Unterricht den Themenkreis Messen-Steuern-Regeln zu behandeln. Die Funktionalit{\"a}t orientiert sich am CVK-Interface der Firma Fischertechnik. Im Gegensatz zu kommerziellen L{\"o}sungen erlaubt unser Aufbau auch den preiswerten Einsatz in Gruppen- oder Einzelarbeit. Abschließend berichten wir {\"u}ber ein Beispiel aus dem Unterrichtseinsatz.},
  language  = {de}
}
@inproceedings{LindnerKolbRingbeck2008,
  author    = {Lindner, Marvin and Kolb, Andreas and Ringbeck, Thorsten},
  title     = {New insights into the calibration of ToF-sensors},
  series = {2008 IEEE Computer Society Conference on Computer Vision and Pattern Recognition workshops : Anchorage, AK, 23 - 28 June 2008},
  booktitle = {2008 IEEE Computer Society Conference on Computer Vision and Pattern Recognition workshops : Anchorage, AK, 23 - 28 June 2008},
  publisher = {IEEE Service Center},
  address   = {Piscataway, NJ},
  isbn      = {978-1-4244-2339-2},
  pages     = {1 -- 5},
  year      = {2008},
  abstract  = {Time-of-flight (ToF) sensors have become an alternative to conventional distance sensing techniques like laser scanners or image based stereo. ToF sensors provide full range distance information at high frame-rates and thus have a significant impact onto current research in areas like online object recognition, collision prevention or scene reconstruction. However, ToF cameras like the photonic mixer device (PMD) still exhibit a number of challenges regarding static and dynamic effects, e.g. systematic distance errors and motion artefacts, respectively. Sensor calibration techniques reducing static system errors have been proposed and show promising results. However, current calibration techniques in general need a large set of reference data in order to determine the corresponding parameters for the calibration model. This paper introduces a new calibration approach which combines different demodulation techniques for the ToF- camera 's reference signal. Examples show, that the resulting combined demodulation technique yields improved distance values based on only two required reference data sets.},
  language  = {en}
}
@inproceedings{BragardSoltauDeDonckeretal.2010,
  author    = {Bragard, Michael and Soltau, N. and De Doncker, R. W. and Schmiegel, A.},
  title     = {Design and implementation of a 5 kW photovoltaic system with li-ion battery and additional DC-DC converter},
  series = {2010 IEEE Energy Conversion Congress and Exposition (ECCE 2010) : Atlanta, Georgia, USA, 12 - 16 September 2010 / [sponsored by the IEEE Power Electronics and Industry Applications Societies]},
  booktitle = {2010 IEEE Energy Conversion Congress and Exposition (ECCE 2010) : Atlanta, Georgia, USA, 12 - 16 September 2010 / [sponsored by the IEEE Power Electronics and Industry Applications Societies]},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  isbn      = {978-1-4244-5286-6 (Print)},
  doi       = {10.1109/ECCE.2010.5618220},
  pages     = {2944 -- 2949},
  year      = {2010},
  language  = {en}
}
@article{DroopChenRadfordetal.2023,
  author    = {Droop, Philipp and Chen, Shaohuang and Radford, Melissa J. and Paulßen, Elisabeth and Gates, Byron D. and Reilly, Raymond M. and Radchenko, Valery and Hoehr, Cornelia},
  title     = {Synthesis of 197m/gHg labelled gold nanoparticles for targeted radionuclide therapy},
  series = {Radiochimica Acta},
  volume    = {111},
  journal   = {Radiochimica Acta},
  number    = {10},
  publisher = {De Gruyter},
  address   = {Berlin [u.a.]},
  issn      = {2193-3405},
  doi       = {10.1515/ract-2023-0144},
  pages     = {773 -- 779},
  year      = {2023},
  abstract  = {Meitner-Auger-electron emitters have a promising potential for targeted radionuclide therapy of cancer because of their short range and the high linear energy transfer of Meitner-Auger-electrons (MAE). One promising MAE candidate is 197m/gHg with its half-life of 23.8 h and 64.1 h, respectively, and high MAE yield. Gold nanoparticles (AuNPs) that are labelled with 197m/gHg could be a helpful tool for radiation treatment of glioblastoma multiforme when infused into the surgical cavity after resection to prevent recurrence. To produce such AuNPs, 197m/gHg was embedded into pristine AuNPs. Two different syntheses were tested starting from irradiated gold containing trace amounts of 197m/gHg. When sodium citrate was used as reducing agent, no 197m/gHg labelled AuNPs were formed, but with tannic acid, 197m/gHg labeled AuNPs were produced. The method was optimized by neutralizing the pH (pH = 7) of the Au/197m/gHg solution, which led to labelled AuNPs with a size of 12.3 ± 2.0 nm as measured by transmission electron microscopy. The labelled AuNPs had a concentration of 50 μg (gold)/mL with an activity of 151 ± 93 kBq/mL (197gHg, time corrected to the end of bombardment).},
  language  = {en}
}
@inproceedings{BragardConradDeDoncker2010,
  author    = {Bragard, Michael and Conrad, M. and De Doncker, R. W.},
  title     = {The integrated emitter turn-off thyristor (IETO) : an innovative thyristor based high power semiconductor device using MOS assisted turn-off},
  series = {2010 IEEE Energy Conversion Congress and Exposition (ECCE 2010) : Atlanta, Georgia, USA, 12 - 16 September 2010 / [sponsored by the IEEE Power Electronics and Industry Applications Societies]},
  booktitle = {2010 IEEE Energy Conversion Congress and Exposition (ECCE 2010) : Atlanta, Georgia, USA, 12 - 16 September 2010 / [sponsored by the IEEE Power Electronics and Industry Applications Societies]},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  isbn      = {978-1-4244-5286-6 (Print)},
  doi       = {10.1109/ECCE.2010.5618410},
  pages     = {4551 -- 4557},
  year      = {2010},
  language  = {en}
}
@article{Heuermann1999,
  author    = {Heuermann, Holger},
  title     = {Calibration procedures with series impedances and unknown lines simplify on-wafer measurements},
  series = {IEEE transactions on microwave theory and techniques : MTT ; a publication of the IEEE Microwave Theory and Techniques Society. 47 (1999), H. 1},
  journal   = {IEEE transactions on microwave theory and techniques : MTT ; a publication of the IEEE Microwave Theory and Techniques Society. 47 (1999), H. 1},
  isbn      = {0018-9480},
  pages     = {1 -- 5},
  year      = {1999},
  language  = {en}
}
@article{HeuermannSchiek1995,
  author    = {Heuermann, Holger and Schiek, B.},
  title     = {Error corrected impedance measurements with a network analyzer},
  series = {IEEE transactions on instrumentation and measurement : IM / Institute of Electrical and Electronics Engineers, Instrumentation and Measurement Group. 44 (1995), H. 2},
  journal   = {IEEE transactions on instrumentation and measurement : IM / Institute of Electrical and Electronics Engineers, Instrumentation and Measurement Group. 44 (1995), H. 2},
  isbn      = {0018-9456},
  pages     = {295 -- 299},
  year      = {1995},
  language  = {en}
}
@article{WolfSimonSchlick1998,
  author    = {Wolf, Martin R. and Simon, S. and Schlick, Christopher},
  title     = {Qualitative and Quantitative Analysis of Cooperation / Wolf, M. ; Simon, S. ; Schlick, C.},
  series = {Proceedings : May 26 - 29, 1998, Cannes (France) = Actes : 26 - 29 mai 1998 / INRIA, Institut National de Recherche en Informatique et en Automatique, Unit{\´e} de recherche ... F. Darses ..., eds},
  journal   = {Proceedings : May 26 - 29, 1998, Cannes (France) = Actes : 26 - 29 mai 1998 / INRIA, Institut National de Recherche en Informatique et en Automatique, Unit{\´e} de recherche ... F. Darses ..., eds},
  publisher = {-},
  address   = {Cannes},
  pages     = {1 -- 5},
  year      = {1998},
  language  = {en}
}
@article{Ritz2002,
  author    = {Ritz, Thomas},
  title     = {Personalized Information Services: Production and Distribution of these Services employing Mass-Customization},
  year      = {2002},
  language  = {en}
}
@inproceedings{StephanHeuermannPrantner2016,
  author    = {Stephan, Achim and Heuermann, Holger and Prantner, Michael},
  title     = {Cutting human tissue with novel atmospheric-pressure microwave plasma jet},
  series = {46th European Microwave Conference (EuMC)},
  booktitle = {46th European Microwave Conference (EuMC)},
  publisher = {IEEE},
  isbn      = {978-2-87487-043-9},
  doi       = {10.1109/EuMC.2016.7824490},
  pages     = {902 -- 905},
  year      = {2016},
  language  = {en}
}
@article{HeuermannSchiek1991,
  author    = {Heuermann, Holger and Schiek, Burkhard},
  title     = {Robuster Algorithmus zur Streuparameterbestimmung f{\"u}r systemfehlerkorrigierte Netzwerkanalysatoren},
  series = {Kleinheubacher Berichte : Vortr{\"a}ge und Berichte der gemeinsamen Tagung des U.R.S.I.-Landesausschusses in der Bundesrepublik Deutschland / Hrsg.: Deutsche Telekom AG. 35. 1991 (1991)},
  journal   = {Kleinheubacher Berichte : Vortr{\"a}ge und Berichte der gemeinsamen Tagung des U.R.S.I.-Landesausschusses in der Bundesrepublik Deutschland / Hrsg.: Deutsche Telekom AG. 35. 1991 (1991)},
  pages     = {555 -- 556},
  year      = {1991},
  language  = {de}
}
@inproceedings{EltesterFerreinSchiffer2020,
  author    = {Eltester, Niklas Sebastian and Ferrein, Alexander and Schiffer, Stefan},
  title     = {A smart factory setup based on the RoboCup logistics league},
  series = {2020 IEEE Conference on Industrial Cyberphysical Systems (ICPS)},
  booktitle = {2020 IEEE Conference on Industrial Cyberphysical Systems (ICPS)},
  publisher = {IEEE},
  address   = {New York, NY},
  doi       = {10.1109/ICPS48405.2020.9274766},
  pages     = {297 -- 302},
  year      = {2020},
  abstract  = {In this paper we present SMART-FACTORY, a setup for a research and teaching facility in industrial robotics that is based on the RoboCup Logistics League. It is driven by the need for developing and applying solutions for digital production. Digitization receives constantly increasing attention in many areas, especially in industry. The common theme is to make things smart by using intelligent computer technology. Especially in the last decade there have been many attempts to improve existing processes in factories, for example, in production logistics, also with deploying cyber-physical systems. An initiative that explores challenges and opportunities for robots in such a setting is the RoboCup Logistics League. Since its foundation in 2012 it is an international effort for research and education in an intra-warehouse logistics scenario. During seven years of competition a lot of knowledge and experience regarding autonomous robots was gained. This knowledge and experience shall provide the basis for further research in challenges of future production. The focus of our SMART-FACTORY is to create a stimulating environment for research on logistics robotics, for teaching activities in computer science and electrical engineering programmes as well as for industrial users to study and explore the feasibility of future technologies. Building on a very successful history in the RoboCup Logistics League we aim to provide stakeholders with a dedicated facility oriented at their individual needs.},
  language  = {en}
}
@article{WolfFoltzKillichetal.2001,
  author    = {Wolf, Martin R. and Foltz, Christian and Killich, Stephan and Schmidt, Ludger},
  title     = {Task and Information Modeling for Cooperative Work / Foltz, Christian ; Killich, Stephan ; Wolf, Martin ; Schmidt, Ludger ; Luczak, Holger},
  series = {Systems, social and internationalization design aspects of human-computer interaction / ed. by Michael J. Smith, Gavriel Salvendy Vol. 2},
  journal   = {Systems, social and internationalization design aspects of human-computer interaction / ed. by Michael J. Smith, Gavriel Salvendy Vol. 2},
  publisher = {-},
  isbn      = {0-8058-3608-X},
  pages     = {172 -- 176},
  year      = {2001},
  language  = {en}
}
@inproceedings{FerreinPotgieterSteinbauer2009,
  author    = {Ferrein, Alexander and Potgieter, Anet and Steinbauer, Gerald},
  title     = {Self-aware robots - What do we need from learning, deliberation, and reactive control?},
  series = {HYCAS 2009 : International Workshop on Hybrid Control of Autonomous Systems : Integrating Learning, Deliberation and Reactive Control : Pasadena, Calif., 13 July 2009},
  booktitle = {HYCAS 2009 : International Workshop on Hybrid Control of Autonomous Systems : Integrating Learning, Deliberation and Reactive Control : Pasadena, Calif., 13 July 2009},
  publisher = {AAAI Pr.},
  pages     = {1 -- 5},
  year      = {2009},
  language  = {en}
}
@article{HeuermannSadeghfam2004,
  author    = {Heuermann, Holger and Sadeghfam, Arash},
  title     = {Novel balanced inductor for compact differential systems / Sadeghfam, Arash; Heuermann, Holger},
  series = {Conference proceedings : Tuesday 12th, Wednesday 13th and Thursday 14th October, [RAI International Exhibition and Congress Centre, Amsterdam ; part of European Microwave Week 2004] / EuMA, European Microwave Association},
  journal   = {Conference proceedings : Tuesday 12th, Wednesday 13th and Thursday 14th October, [RAI International Exhibition and Congress Centre, Amsterdam ; part of European Microwave Week 2004] / EuMA, European Microwave Association},
  publisher = {Horizon House Publ.},
  address   = {London},
  isbn      = {1-580-53992-0},
  pages     = {709 -- 712},
  year      = {2004},
  language  = {en}
}