@inproceedings{NakagawaMichauxKallweitetal.2015,
  author    = {Nakagawa, Masaki and Michaux, Frank and Kallweit, Stephan and Maeda, Kazuhiro},
  title     = {Unsteady flow measurements in the wake behind a wind-tunnel car model by using high-speed planar PIV},
  series = {11TH International Symposium on Particle Image Velocimetry - PIV15 Santa Barbara, California, September 14-16, 2015},
  booktitle = {11TH International Symposium on Particle Image Velocimetry - PIV15 Santa Barbara, California, September 14-16, 2015},
  pages     = {21 S.},
  year      = {2015},
  abstract  = {This study investigates unsteady characteristics of the wake behind a 28\%-scale car model in a wind tunnel using highspeed planar particle image velocimetry (PIV). The car model is based on a hatchback passenger car that is known to have relatively high fluctuations in its aerodynamic loads. This study primarily focuses on the lateral motion of the flow on the horizontal plane to determine the effect of the flow motion on the straight-line stability and the initial steering response of the actual car on a track. This paper first compares the flow fields in the wake behind the above mentioned model obtained using conventional and high-speed planar PIV, with sampling frequencies of 8 Hz and 1 kHz, respectively. Large asymmetrically coherent flow structures, which fluctuate at frequencies below 2 Hz, are observed in the results of highspeed PIV measurements, whereas conventional PIV is unable to capture these features of the flow owing to aliasing. This flow pattern with a laterally swaying motion is represented by opposite signs of cross-correlation coefficients of streamwise velocity fluctuations for the two sides of the car model. Effects of two aerodynamic devices that are known to reduce the fluctuation levels of the aerodynamic loads are then extensively investigated. The correlation analyses reveal that these devices indeed reduce the fluctuation levels of the flow and the correlation values around the rear combination-lamp, but it is found that the effects of these devices are different around the c-pillar.},
  language  = {en}
}
@inproceedings{KilicRaatschenAstanehAsletal.2015,
  author    = {Kilic, S. A. and Raatschen, Hans-J{\"u}rgen and Astaneh-Asl, A. and Apaydin, N. M.},
  title     = {Finite element modeling of the Fatih Sultan Mehmet Suspension Bridge},
  series = {Multi-Span Large Bridges - Proceedings of the International Conference on Multi-Span Large Bridges},
  booktitle = {Multi-Span Large Bridges - Proceedings of the International Conference on Multi-Span Large Bridges},
  publisher = {CRC Press},
  address   = {Leiden},
  isbn      = {9781138027572},
  pages     = {1169 -- 1173},
  year      = {2015},
  language  = {en}
}
@inproceedings{Wollert2015,
  author    = {Wollert, J{\"o}rg},
  title     = {Wireless systems for machinery safety : Requirements and solutions for wireless real time systems},
  series = {16th International Conference on Research and Education in Mechatronics (REM), 2015},
  booktitle = {16th International Conference on Research and Education in Mechatronics (REM), 2015},
  isbn      = {978-3-945728-01-7},
  doi       = {10.1109/REM.2015.7380377},
  pages     = {88 -- 91},
  year      = {2015},
  language  = {en}
}
@inproceedings{FateriGebhardtRenftle2015,
  author    = {Fateri, Miranda and Gebhardt, Andreas and Renftle, Georg},
  title     = {Additive manufacturing of drainage segments for cooling system of crucible melting furnaces},
  series = {Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials II, International Symposium on Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials, ICACC 15, 39th International Conference on Advanced Ceramics and Composites, Daytona Beach, FL, US, Jan 25-30, 2015},
  booktitle = {Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials II, International Symposium on Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials, ICACC 15, 39th International Conference on Advanced Ceramics and Composites, Daytona Beach, FL, US, Jan 25-30, 2015},
  publisher = {Wiley},
  address   = {Hoboken},
  issn      = {0196-6219},
  doi       = {10.1002/9781119211662.ch14},
  pages     = {123 -- 131},
  year      = {2015},
  language  = {en}
}
@inproceedings{KallweitFerreinScholletal.2014,
  author    = {Kallweit, Stephan and Ferrein, Alexander and Scholl, Ingrid and Reichert, Walter},
  title     = {Mobile Autonome Systeme in der Lehre, am Beispiel der ROS Summer School},
  series = {Tagungsband AALE 2014 : das Forum f{\"u}r Fachleute der Automatisierungstechnik aus Hochschulen und Wirtschaft ; 11. Fachkonferenz, Regensburg ; [11. Konferenz f{\"u}r Angewandte Automatisierungstechnik in Lehre und Entwicklung / Ostbayerische Technische Hochschule Regensburg; VFAALE, Verein der Freunde und F{\"o}rderer der Angewandten Automatisierungstechnik]},
  booktitle = {Tagungsband AALE 2014 : das Forum f{\"u}r Fachleute der Automatisierungstechnik aus Hochschulen und Wirtschaft ; 11. Fachkonferenz, Regensburg ; [11. Konferenz f{\"u}r Angewandte Automatisierungstechnik in Lehre und Entwicklung / Ostbayerische Technische Hochschule Regensburg; VFAALE, Verein der Freunde und F{\"o}rderer der Angewandten Automatisierungstechnik]},
  publisher = {Dt. Industrieverl.},
  address   = {M{\"u}nchen},
  isbn      = {978-3-8356-7142-3},
  pages     = {157 -- 163},
  year      = {2014},
  language  = {de}
}
@inproceedings{PfaffSappler2014,
  author    = {Pfaff, Raphael and Sappler, Magnus},
  title     = {TRANSPACT : die automatische Mittelpufferkupplung f{\"u}r attraktiven G{\"u}terverkehr},
  series = {RAIL-FREIGHT 2014 : Zukunft des Schieneng{\"u}terverkehrs ; Technologie - {\"O}konomie - {\"O}kologie - Verkehrspolitik ; [Tagungsdokumentation des IV. Internationalen Fachsymposiums zum Thema Schieneng{\"u}terverkehr] (Bahntechnik Aktuell ; 48)},
  booktitle = {RAIL-FREIGHT 2014 : Zukunft des Schieneng{\"u}terverkehrs ; Technologie - {\"O}konomie - {\"O}kologie - Verkehrspolitik ; [Tagungsdokumentation des IV. Internationalen Fachsymposiums zum Thema Schieneng{\"u}terverkehr] (Bahntechnik Aktuell ; 48)},
  publisher = {Verl. d. IFV Bahntechnik},
  address   = {Berlin},
  isbn      = {978-3-940727-41-1},
  pages     = {121 -- 128},
  year      = {2014},
  language  = {de}
}
@inproceedings{HuberRauStreblowetal.2014,
  author    = {Huber, Max and Rau, Sebastian and Streblow, Rita and Wollert, J{\"o}rg and M{\"u}ller, Dirk},
  title     = {L{\"u}ftungskan{\"a}le als Funkstrecke},
  series = {Jahreskolloquium Kommunikation in der Automation (KommA 2014) : Lemgo, 18.11.2014 / J{\"u}rgen Jasperneite ... (Hrsg.)},
  booktitle = {Jahreskolloquium Kommunikation in der Automation (KommA 2014) : Lemgo, 18.11.2014 / J{\"u}rgen Jasperneite ... (Hrsg.)},
  organization    = {Jahreskolloquium Kommunikation in der Automation <5, 2014, Lemgo>},
  isbn      = {978-3-9814062-4-5},
  pages     = {1 -- 8},
  year      = {2014},
  language  = {de}
}
@inproceedings{FateriGebhardt2014,
  author    = {Fateri, Miranda and Gebhardt, Andreas},
  title     = {Jewelry fabrication via selective laser melting of glass},
  series = {ASME 2014 12th Biennial Conference on Engineering Systems Design and Analysis Volume 1: Applied Mechanics; Automotive Systems; Biomedical Biotechnology Engineering; Computational Mechanics; Design; Digital Manufacturing; Education; Marine and Aerospace Applications},
  booktitle = {ASME 2014 12th Biennial Conference on Engineering Systems Design and Analysis Volume 1: Applied Mechanics; Automotive Systems; Biomedical Biotechnology Engineering; Computational Mechanics; Design; Digital Manufacturing; Education; Marine and Aerospace Applications},
  isbn      = {978-0-7918-4583-7},
  doi       = {10.1115/ESDA2014-20380},
  pages     = {V001T06A005},
  year      = {2014},
  abstract  = {Selective Laser Melting (SLM) is one of the Additive Manufacturing (AM) technologies applicable for producing complex geometries which are typically expensive or difficult to fabricate using conventional methods. This process has been extensively investigated experimentally for various metals and the fabrication process parameters have been established for different applications; however, fabricating 3D glass objects using SLM technology has remained a challenge so far although it could have many applications. This paper presents a summery on various experimental evaluations of a material database incorporating the build parameters of glass powder using the SLM process for jewelry applications.},
  language  = {en}
}
@inproceedings{KallweitTedjasukmanaKorculanin2013,
  author    = {Kallweit, Stephan and Tedjasukmana, O. and Korculanin, O.},
  title     = {Adaption und Implementierung eines 3D-PIV Algorithmus auf massiv paralleler Hardware},
  series = {Lasermethoden in der Str{\"o}mungsmesstechnik : 21. Fachtagung, 3. - 5. September 2013, M{\"u}nchen},
  booktitle = {Lasermethoden in der Str{\"o}mungsmesstechnik : 21. Fachtagung, 3. - 5. September 2013, M{\"u}nchen},
  editor    = {K{\"a}hler, Christian J.},
  publisher = {GALA},
  address   = {Karlsruhe},
  isbn      = {978-3-9805613-9-6},
  pages     = {Sitzung 4, Vortrag 16},
  year      = {2013},
  language  = {de}
}
@inproceedings{StarkeKunkelHahn2013,
  author    = {Starke, G{\"u}nther and Kunkel, Thomas and Hahn, Daniel},
  title     = {Flexible collaboration and control of heterogeneous mechatronic devices and systems by means of an event-driven, SOA-based automation concept},
  series = {2013 IEEE International Conference on Industrial Technologies (ICIT-13)},
  booktitle = {2013 IEEE International Conference on Industrial Technologies (ICIT-13)},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  organization    = {International Conference on Industrial Technologies <2013, Cape Town>},
  isbn      = {978-1-4673-4567-5 ; 978-1-4673-4569-9},
  pages     = {1982 -- 1987},
  year      = {2013},
  language  = {en}
}