@article{FrohbergAnik1986,
  author    = {Frohberg, Martin G. and Anik, Sabri},
  title     = {Experimentelle Ergebnisse zum L{\"o}sungsverhalten von Sauerstoff in den Systemen Cu-O-Bi und Cu-O-Pb},
  series = {Neue H{\"u}tte : metallurgisch-metallkundliche Fachzeitschrift f{\"u}r Forschung und Praxis},
  volume    = {31},
  journal   = {Neue H{\"u}tte : metallurgisch-metallkundliche Fachzeitschrift f{\"u}r Forschung und Praxis},
  number    = {9},
  issn      = {0028-3207},
  pages     = {344 -- 347},
  year      = {1986},
  language  = {de}
}
@article{Gartzen2011,
  author    = {Gartzen, Johannes},
  title     = {Sp{\"a}tes Aufwachen aus dem Dornr{\"o}schenschlaf: Ohne Energie l{\"a}uft nichts},
  series = {Aachener Nachrichten (2011)},
  journal   = {Aachener Nachrichten (2011)},
  publisher = {Zeitungsverl. Aachen},
  address   = {Aachen},
  pages     = {22},
  year      = {2011},
  language  = {de}
}
@article{GartzenGebhardtAngeretal.1994,
  author    = {Gartzen, Johannes and Gebhardt, Andreas and Anger, A. and Petschke, U. and Lingens, Hans},
  title     = {Laserstrahlschweißen mit Schweißdraht von W{\"a}rmetauschern mit hohem Wirkungsgrad},
  series = {Proceedings : Aachen, Germany, 31st October - 4th November, 1994 / 27th ISATA},
  journal   = {Proceedings : Aachen, Germany, 31st October - 4th November, 1994 / 27th ISATA},
  publisher = {Automotive Automation},
  address   = {Croydon},
  isbn      = {0-947719-64-4},
  pages     = {397 -- 403},
  year      = {1994},
  language  = {de}
}
@article{GartzenHeil1993,
  author    = {Gartzen, Johannes and Heil, G.},
  title     = {Verwertung von Verbundfolien-Materialien},
  series = {Spektrum der Wissenschaft (1993)},
  journal   = {Spektrum der Wissenschaft (1993)},
  isbn      = {0170-2971},
  pages     = {114 -- 116},
  year      = {1993},
  language  = {de}
}
@article{GartzenHerinrichs1995,
  author    = {Gartzen, Johannes and Herinrichs, Horst},
  title     = {Konstruktive Auslegung von Verbauplatten - kritisch betrachtet},
  series = {Tiefbau, Ingenieurbau, Straßenbau TIS. 37 (1995), H. 7},
  journal   = {Tiefbau, Ingenieurbau, Straßenbau TIS. 37 (1995), H. 7},
  isbn      = {0340-5079},
  pages     = {19 -- 21},
  year      = {1995},
  language  = {de}
}
@article{GartzenLingensSchoenbohmetal.1993,
  author    = {Gartzen, Johannes and Lingens, Hans and Sch{\"o}nbohm, J. and Baumjohann, F. and Gebhardt, Andreas},
  title     = {Laserh{\"a}rten - im Verbund m{\"o}glich. Forschungsverbund Lasertechnik NRW auf der Suche nach neuen Laseranwendungen},
  series = {Technica, Rupperswil. 42 (1993), H. 24},
  journal   = {Technica, Rupperswil. 42 (1993), H. 24},
  isbn      = {0040-866X},
  pages     = {14 -- 18},
  year      = {1993},
  language  = {de}
}
@article{Gauchel2001,
  author    = {Gauchel, Joachim},
  title     = {Automatisierte Montageanlage im FB8 - Eine lohnende Investition},
  series = {FH Fachblatt (2001)},
  journal   = {FH Fachblatt (2001)},
  pages     = {12 -- 12},
  year      = {2001},
  language  = {de}
}
@article{Gauchel2008,
  author    = {Gauchel, Joachim},
  title     = {Berechnung von Kurvengetrieben mit Gleitbewegung im Kurvengelenk},
  series = {Bewegungstechnik 2008 : Koppelgetriebe, Kurvengetriebe und geregelte Antriebe im Maschinen-, Fahrzeug- und Ger{\"a}tebau ; Tagung Fulda, 23. und 24. September 2008 / VDI, Entwicklung, Konstruktion, Vertrieb},
  journal   = {Bewegungstechnik 2008 : Koppelgetriebe, Kurvengetriebe und geregelte Antriebe im Maschinen-, Fahrzeug- und Ger{\"a}tebau ; Tagung Fulda, 23. und 24. September 2008 / VDI, Entwicklung, Konstruktion, Vertrieb},
  publisher = {VDI-Verl.},
  address   = {D{\"u}sseldorf},
  isbn      = {978-3-18-092050-4},
  pages     = {211 -- 226},
  year      = {2008},
  language  = {de}
}
@article{Gebhardt2003,
  author    = {Gebhardt, Andreas},
  title     = {Rapid Prototyping : Grundlagen, Verfahren und Einsatzkriterien f{\"u}r die industrielle Praxis},
  series = {Konstruieren mit Kunststoffen. - 3. Aufl.},
  journal   = {Konstruieren mit Kunststoffen. - 3. Aufl.},
  publisher = {Springer -VDI-Verl.},
  address   = {D{\"u}sseldorf},
  isbn      = {3-935065-13-2},
  year      = {2003},
  language  = {de}
}
@article{Gebhardt2001,
  author    = {Gebhardt, Andreas},
  title     = {Rapid Prototyping and PIV},
  year      = {2001},
  language  = {en}
}
@article{Gebhardt2001,
  author    = {Gebhardt, Andreas},
  title     = {Laserwelding with fillerwire},
  series = {LIA handbook of laser material processing / Laser Institute of America},
  journal   = {LIA handbook of laser material processing / Laser Institute of America},
  address   = {Orlando, Florida},
  isbn      = {3-540-41770-2},
  year      = {2001},
  language  = {en}
}
@article{Gebhardt2002,
  author    = {Gebhardt, Andreas},
  title     = {Virtual Reality oder Rapid Prototyping?},
  series = {Zeitschrift f{\"u}r die gesamte Wertsch{\"o}pfungskette Automobilwirtschaft (2002)},
  journal   = {Zeitschrift f{\"u}r die gesamte Wertsch{\"o}pfungskette Automobilwirtschaft (2002)},
  year      = {2002},
  language  = {de}
}
@article{Gebhardt2002,
  author    = {Gebhardt, Andreas},
  title     = {Vakuumgiessen innerhalb der Produktentstehung},
  series = {Form und Werkzeug (2002)},
  journal   = {Form und Werkzeug (2002)},
  year      = {2002},
  language  = {de}
}
@article{Gebhardt2002,
  author    = {Gebhardt, Andreas},
  title     = {Potenziale und Grenzen virtueller Prototypen},
  year      = {2002},
  language  = {de}
}
@article{Gebhardt1997,
  author    = {Gebhardt, Andreas},
  title     = {Lasereinsatz in der Fertigung der Fahrzeugindustrie. Grundlagen der Anwendung von Lasern zur Materialbearbeitung},
  pages     = {1 -- 154},
  year      = {1997},
  language  = {de}
}
@article{Gebhardt1996,
  author    = {Gebhardt, Andreas},
  title     = {Rapid Prototyping - Laser-gest{\"u}tzte Revolution der Produktentwicklung. Teil I},
  series = {Laser Magazin (1996)},
  journal   = {Laser Magazin (1996)},
  isbn      = {0945-8875},
  pages     = {6 -- 9},
  year      = {1996},
  language  = {de}
}
@article{Gebhardt1997,
  author    = {Gebhardt, Andreas},
  title     = {Aktuelle Trends bei RP und RT},
  series = {Kunststoffe, M{\"u}nchen. 87 (1997), H. 1},
  journal   = {Kunststoffe, M{\"u}nchen. 87 (1997), H. 1},
  isbn      = {0023-5563},
  pages     = {27 -- 30},
  year      = {1997},
  language  = {de}
}
@article{Gebhardt2001,
  author    = {Gebhardt, Andreas},
  title     = {Entwicklungstendenzen und neue Systeme im Rapid Prototyping},
  series = {Industrie Management. 17 (2001), H. 3},
  journal   = {Industrie Management. 17 (2001), H. 3},
  isbn      = {1434-1980},
  pages     = {42 -- 46},
  year      = {2001},
  language  = {de}
}
@article{Gebhardt1999,
  author    = {Gebhardt, Andreas},
  title     = {Schnell und flexibel zur Kleinserie. Effizienzsteigerung bei der Realisierung von Komponenten und Teilsystemen},
  series = {Ingenieur-Werkstoffe. 8 (1999), H. 3},
  journal   = {Ingenieur-Werkstoffe. 8 (1999), H. 3},
  isbn      = {0935-5715},
  pages     = {8 -- 14},
  year      = {1999},
  language  = {de}
}
@article{Gebhardt1999,
  author    = {Gebhardt, Andreas},
  title     = {Marktentwicklung im Rapid Prototyping},
  series = {Kunststoffe, M{\"u}nchen. 89 (1999), H. 11},
  journal   = {Kunststoffe, M{\"u}nchen. 89 (1999), H. 11},
  isbn      = {0023-5563},
  pages     = {50 -- 55},
  year      = {1999},
  language  = {de}
}
@article{Gebhardt2000,
  author    = {Gebhardt, Andreas},
  title     = {Materialfrage f{\"u}hrt h{\"a}ufig zu Trugschl{\"u}ssen. Wunsch und Wirklichkeit im Rapid Prototyping - Teil 2},
  series = {Industrieanzeiger. 122 (2000), H. 4},
  journal   = {Industrieanzeiger. 122 (2000), H. 4},
  isbn      = {0019-9036},
  pages     = {41 -- 41},
  year      = {2000},
  language  = {de}
}
@article{Gebhardt1998,
  author    = {Gebhardt, Andreas},
  title     = {Rapid Tooling. Der schnelle Weg zum Spritzgießwerkzeug.},
  series = {Kunststoffe, M{\"u}nchen. 88 (1998), H. 11},
  journal   = {Kunststoffe, M{\"u}nchen. 88 (1998), H. 11},
  isbn      = {0023-5563},
  pages     = {1992 -- 2000},
  year      = {1998},
  language  = {de}
}
@article{Gebhardt1989,
  author    = {Gebhardt, Andreas},
  title     = {H{\"a}rten von Kurbelwellen},
  pages     = {1 -- 14},
  year      = {1989},
  language  = {de}
}
@article{Gebhardt2004,
  author    = {Gebhardt, Andreas},
  title     = {Rapid Prototyping},
  series = {Landolt-B{\"o}rnstein - Group VIII Advanced Materials and Technologies‡Vol. 1 Laser Physics and Applications‡Subvol. C Laser Applications / authors: B{\"a}uerle, D. ...},
  journal   = {Landolt-B{\"o}rnstein - Group VIII Advanced Materials and Technologies‡Vol. 1 Laser Physics and Applications‡Subvol. C Laser Applications / authors: B{\"a}uerle, D. ...},
  publisher = {Heidelberg},
  address   = {Springer},
  isbn      = {3-540-00105-0},
  pages     = {105 -- 123},
  year      = {2004},
  language  = {en}
}
@article{Gebhardt2008,
  author    = {Gebhardt, Andreas},
  title     = {Hype um Generative Verfahren. Generative Verfahren zur Herstellung von Kleinserien durchlaufen die Phase eines Booms},
  series = {Economic Engineering (2008)},
  journal   = {Economic Engineering (2008)},
  isbn      = {1436-3348},
  pages     = {76 -- 79},
  year      = {2008},
  language  = {de}
}
@article{Gebhardt2015,
  author    = {Gebhardt, Andreas},
  title     = {3D-Druck ist {\"u}berall. Modische Accessoires, Kleidung, Medikamente, Nahrungsmittel, Autos, H{\"a}user, Waffen, B{\"u}sten, Musikinstrumente - alles geht},
  series = {Kunststoffe},
  volume    = {105},
  journal   = {Kunststoffe},
  number    = {10},
  publisher = {Hanser},
  address   = {M{\"u}nchen},
  issn      = {0023-5563},
  pages     = {62 -- 70},
  year      = {2015},
  language  = {de}
}
@article{GebhardtBackeskrameretal.1995,
  author    = {Gebhardt, Andreas and Backes, G. and kramer, T. and Kreutz, E.-W. (u.a.)},
  title     = {Beschichten von Kurbelzapfen mit CO2-Laserstrahlung. Energietechnik},
  series = {Maschinenmarkt. 101 (1995), H. 12},
  journal   = {Maschinenmarkt. 101 (1995), H. 12},
  isbn      = {0341-5775},
  pages     = {42 -- 45},
  year      = {1995},
  language  = {de}
}
@article{GebhardtFateri2013,
  author    = {Gebhardt, Andreas and Fateri, Miranda},
  title     = {3D printing and its applications},
  series = {RTejournal - Forum f{\"u}r Rapid Technologie},
  volume    = {10},
  journal   = {RTejournal - Forum f{\"u}r Rapid Technologie},
  number    = {1},
  publisher = {Fachhochschule Aachen},
  address   = {Aachen},
  issn      = {1614-0923},
  url       = {http://nbn-resolving.de/urn:nbn:de:0009-2-35626},
  year      = {2013},
  abstract  = {Eine zunehmende Anzahl von Artikeln in Publikumszeitschriften und Journalen r{\"u}ckt die direkte Herstellung von Bauteilen und Figuren immer mehr in das Bewusstsein einer breiten {\"O}ffentlichkeit. Leider ergibt sich nur selten ein einigermaßen vollst{\"a}ndiges Bild davon, wie und in welchen Lebensbereichen diese Techniken unseren Alltag ver{\"a}ndern werden. Das liegt auch daran, dass die meisten Artikel sehr technisch gepr{\"a}gt sind und sich nur punktuell auf Beispiele st{\"u}tzen. Dieser Beitrag geht von den Bed{\"u}rfnissen der Menschen aus, wie sie z.B. in der Maslow'schen Bed{\"u}rfnispyramide strukturiert dargestellt sind und unterstreicht dadurch, dass 3D Printing (oder Additive Manufacturing resp. Rapid Prototyping) bereits alle Lebensbereiche erfasst hat und im Begriff ist, viele davon zu revolutionieren.},
  language  = {en}
}
@article{GebhardtFateri2014,
  author    = {Gebhardt, Andreas and Fateri, Miranda},
  title     = {3D-Drucken und die Anwendungen},
  series = {RTejournal - Forum f{\"u}r Rapid Technologie},
  volume    = {11 (2014)},
  journal   = {RTejournal - Forum f{\"u}r Rapid Technologie},
  number    = {1},
  issn      = {1614-0923},
  pages     = {1 -- 9},
  year      = {2014},
  language  = {de}
}
@article{GebhardtGuntermannHaeming1997,
  author    = {Gebhardt, Andreas and Guntermann, P. and H{\"a}ming, L.},
  title     = {Schweißen mit dem Nd:YAG-Laser},
  series = {Der Praktiker, Schweißen und Schneiden. 49 (1997), H. 4},
  journal   = {Der Praktiker, Schweißen und Schneiden. 49 (1997), H. 4},
  isbn      = {0554-9965},
  pages     = {170 -- 172},
  year      = {1997},
  language  = {de}
}
@article{GebhardtGuntermannSauretal.1996,
  author    = {Gebhardt, Andreas and Guntermann, P. and Saur, G. and Gartzen, Johannes},
  title     = {Neue Impulse f{\"u}r den Leichtbau. Ein Konstruktionsprinzip f{\"u}r Verbauplatten mit Laserschweißen am verdeckten Stoß.},
  series = {Laser-Praxis (1996)},
  journal   = {Laser-Praxis (1996)},
  isbn      = {0937-7069},
  pages     = {21 -- 24},
  year      = {1996},
  language  = {de}
}
@article{GebhardtHoetterZiebura2014,
  author    = {Gebhardt, Andreas and H{\"o}tter, Jan-Steffen and Ziebura, Dawid},
  title     = {Impact of SLM build parameters on the surface quality},
  series = {RTejournal - Forum f{\"u}r Rapid Technologien},
  volume    = {11 (2014)},
  journal   = {RTejournal - Forum f{\"u}r Rapid Technologien},
  number    = {1},
  issn      = {1614-0923},
  pages     = {1 -- 14},
  year      = {2014},
  language  = {de}
}
@article{GebhardtMathar1994,
  author    = {Gebhardt, Andreas and Mathar, W.},
  title     = {Auftragsabwicklung und branchenspezifische Anforderungen an SFM-Modelle -am Beispiel medizinischer Modelle},
  pages     = {188 -- 191},
  year      = {1994},
  language  = {de}
}
@article{GebhardtMatharPlumetal.1996,
  author    = {Gebhardt, Andreas and Mathar, W. and Plum, H-D. and Wolf, M.},
  title     = {Serienqualit{\"a}t und -st{\"u}ckzahlen durch Abformprozesse},
  pages     = {147 -- 159},
  year      = {1996},
  language  = {de}
}
@article{GebhardtMatharPlum1994,
  author    = {Gebhardt, Andreas and Mathar, W. and Plum, H.-D.},
  title     = {SFM-System Stereolithographie und selektives Lasersintern im Vergleich},
  pages     = {85 -- 95},
  year      = {1994},
  language  = {de}
}
@article{GebhardtPflug1995,
  author    = {Gebhardt, Andreas and Pflug, T-K.},
  title     = {Innovationsschub mittels Rapid-Prototyping. Teil I},
  series = {CAD-CAM Report. 14 (1995), H. 7},
  journal   = {CAD-CAM Report. 14 (1995), H. 7},
  isbn      = {0930-7117},
  pages     = {56 -- 65},
  year      = {1995},
  language  = {de}
}
@article{GebhardtPlug1995,
  author    = {Gebhardt, Andreas and Plug, T-K.},
  title     = {Innovationsschub mittels Rapid-Prototyping, Teil II},
  series = {CAD-CAM Report. 14 (1995), H. 9},
  journal   = {CAD-CAM Report. 14 (1995), H. 9},
  isbn      = {0930-7117},
  pages     = {78 -- 85},
  year      = {1995},
  language  = {de}
}
@article{GebhardtPlumMatharetal.1996,
  author    = {Gebhardt, Andreas and Plum, H.D. and Mathar, W. and Wolf, M.},
  title     = {TrueForm - erste Anwendung des neuen Sintermaterials mit Vakuumgießen und Investmentgießen},
  pages     = {231 -- 236},
  year      = {1996},
  language  = {de}
}
@article{GebhardtSchmachtenberg1996,
  author    = {Gebhardt, Andreas and Schmachtenberg, E.},
  title     = {Rapid Prototyping und Tooling},
  pages     = {1 -- 20},
  year      = {1996},
  language  = {de}
}
@article{GebhardtSchmidt2002,
  author    = {Gebhardt, Andreas and Schmidt, Frank-Michael},
  title     = {Practical experiences with making and finishing of coloured models using 3D printing},
  year      = {2002},
  language  = {en}
}
@article{GebhardtSchmidtHoetteretal.2010,
  author    = {Gebhardt, Andreas and Schmidt, Frank-Michael and H{\"o}tter, Jan-Steffen and Sokalla, Wolfgang and Sokalla, Patrick},
  title     = {Additive Manufacturing by selective laser melting the realizer desktop machine and its application for the dental industry},
  series = {Physics Procedia},
  volume    = {5},
  journal   = {Physics Procedia},
  number    = {2},
  isbn      = {1875-3892},
  pages     = {543 -- 549},
  year      = {2010},
  language  = {en}
}
@article{GlowaniaGriesSchoeneetal.2011,
  author    = {Glowania, Michael and Gries, Thomas and Schoene, Jens and Schleser, Markus and Reisgen, Uwe},
  title     = {Innovative coating technology for textile reinforcements of concrete applications},
  series = {13th International Congress on Polymers in Concrete : 10 - 12 February 2010, Funchal, Madeira, Portugal.(Key engineering materials. Vol. 466)},
  journal   = {13th International Congress on Polymers in Concrete : 10 - 12 February 2010, Funchal, Madeira, Portugal.(Key engineering materials. Vol. 466)},
  publisher = {Trans Tech Publications},
  address   = {B{\"a}ch},
  organization    = {International Congress Polymers in Concrete <13, 2010, Funchal, Madeira>},
  isbn      = {978-3-03785-008-4},
  issn      = {1013-9826 (E-Journal) ; 0252-1059 (Print)},
  pages     = {167 -- 173},
  year      = {2011},
  language  = {en}
}
@article{Grundmann2004,
  author    = {Grundmann, Reinhard},
  title     = {Raumlufttechnik, L{\"u}ftungstechnik, Klimatechnik, L{\"a}rm},
  series = {HLH - Zeitschrift f{\"u}r Heizung, L{\"u}ftung, Klimatechnik, Haustechnik. 55 (2004), H. 12},
  journal   = {HLH - Zeitschrift f{\"u}r Heizung, L{\"u}ftung, Klimatechnik, Haustechnik. 55 (2004), H. 12},
  isbn      = {0017-9906},
  pages     = {46 -- 49},
  year      = {2004},
  language  = {de}
}
@article{Grundmann1993,
  author    = {Grundmann, Reinhard},
  title     = {Vergleich von Ger{\"a}uschmessung und -prognose nach VDI 3731},
  series = {HLH - Zeitschrift f{\"u}r Heizung, L{\"u}ftung, Klimatechnik, Haustechnik. 44 (1993), H. 8},
  journal   = {HLH - Zeitschrift f{\"u}r Heizung, L{\"u}ftung, Klimatechnik, Haustechnik. 44 (1993), H. 8},
  isbn      = {0017-9906},
  pages     = {513 -- 516},
  year      = {1993},
  language  = {de}
}
@article{Grundmann1992,
  author    = {Grundmann, Reinhard},
  title     = {Allgemeines Ger{\"a}uschgesetz und spezifische Schallkenngr{\"o}ßen.},
  series = {HLH - Zeitschrift f{\"u}r Heizung, L{\"u}ftung, Klimatechnik, Haustechnik. 43 (1992), H. 8},
  journal   = {HLH - Zeitschrift f{\"u}r Heizung, L{\"u}ftung, Klimatechnik, Haustechnik. 43 (1992), H. 8},
  isbn      = {0017-9906},
  pages     = {437 -- 440},
  year      = {1992},
  language  = {de}
}
@article{Grundmann1990,
  author    = {Grundmann, Reinhard},
  title     = {{\"A}hnlichkeitsgesetze},
  series = {Ventilatoren : mit ausgew{\"a}hlten Probleml{\"o}sungen f{\"u}r den Ger{\"a}te- und Anlagenbau / Leonhard Bommes ...},
  journal   = {Ventilatoren : mit ausgew{\"a}hlten Probleml{\"o}sungen f{\"u}r den Ger{\"a}te- und Anlagenbau / Leonhard Bommes ...},
  publisher = {expert-Verl.},
  address   = {Ehningen bei B{\"o}blingen},
  isbn      = {3-8169-0426-2},
  pages     = {34 -- 88},
  year      = {1990},
  language  = {de}
}
@article{Grundmann1992,
  author    = {Grundmann, Reinhard},
  title     = {Design Criteria for Aeroacoustic Wind Tunnels},
  year      = {1992},
  language  = {en}
}
@article{Grundmann1997,
  author    = {Grundmann, Reinhard},
  title     = {Analyse und Beurteilung des Ger{\"a}usches von Radialventilatoren},
  series = {The Fifth Conference Industrial Fans / J. Otte},
  journal   = {The Fifth Conference Industrial Fans / J. Otte},
  address   = {Gliwice},
  pages     = {358 S.},
  year      = {1997},
  language  = {de}
}
@article{Grundmann1991,
  author    = {Grundmann, Reinhard},
  title     = {Windger{\"a}usche auf gemeinsamen Nenner gebracht - Vorschlag f{\"u}r eine einheitliche Bezeichnung der Emissionskenngr{\"o}ßen von aerodynamischen Ger{\"a}uschquellen},
  series = {HLH - Zeitschrift f{\"u}r Heizung, L{\"u}ftung, Klimatechnik, Haustechnik. 42 (1991), H. 1},
  journal   = {HLH - Zeitschrift f{\"u}r Heizung, L{\"u}ftung, Klimatechnik, Haustechnik. 42 (1991), H. 1},
  isbn      = {0017-9906},
  pages     = {54 -- 55},
  year      = {1991},
  language  = {de}
}
@article{GrundmannBommesDieter1998,
  author    = {Grundmann, Reinhard and Bommes, Leonard and Dieter, Reinartz},
  title     = {Auswahl, Bemessung und Beurteilung eines Radialventilators hohen Wirkungsgrades - Teil 1},
  series = {HLH - Zeitschrift f{\"u}r Heizung, L{\"u}ftung, Klimatechnik, Haustechnik. 49 (1998), H. 5},
  journal   = {HLH - Zeitschrift f{\"u}r Heizung, L{\"u}ftung, Klimatechnik, Haustechnik. 49 (1998), H. 5},
  isbn      = {0017-9906},
  pages     = {28 -- 37},
  year      = {1998},
  language  = {de}
}
@article{GrundmannBommesReinartz1998,
  author    = {Grundmann, Reinhard and Bommes, Leonard and Reinartz, Dieter},
  title     = {Auswahl, Bemessung und Beurteilung eines Radialventilators hohen Wirkungsgrades - Teil 2},
  series = {HLH - Zeitschrift f{\"u}r Heizung, L{\"u}ftung, Klimatechnik, Haustechnik. 49 (1998), H. 7},
  journal   = {HLH - Zeitschrift f{\"u}r Heizung, L{\"u}ftung, Klimatechnik, Haustechnik. 49 (1998), H. 7},
  isbn      = {0017-9906},
  pages     = {44 -- 50},
  year      = {1998},
  language  = {de}
}
@article{GrundmannBommes2004,
  author    = {Grundmann, Reinhard and Bommes, Leonhard},
  title     = {Analyse von Kennfeldern drallgesteuerter Radialventilatoren},
  series = {HLH - Zeitschrift f{\"u}r Heizung, L{\"u}ftung, Klimatechnik, Haustechnik. 55 (2004), H. 8},
  journal   = {HLH - Zeitschrift f{\"u}r Heizung, L{\"u}ftung, Klimatechnik, Haustechnik. 55 (2004), H. 8},
  isbn      = {0017-9906},
  pages     = {54 -- 62},
  year      = {2004},
  language  = {de}
}
@article{GrundmannBommesKlaesetal.1995,
  author    = {Grundmann, Reinhard and Bommes, Leonhard and Klaes, Klaus and Kramer, Carl u.a.},
  title     = {Der Einfluß der Schaufelgestalt von Zentrifugall{\"u}ftern auf deren Leistung und Ger{\"a}uschpegel},
  series = {Noise Control Engineering Journal. 43 (1995), H. 4},
  journal   = {Noise Control Engineering Journal. 43 (1995), H. 4},
  isbn      = {0736-2501},
  pages     = {91 -- 101},
  year      = {1995},
  language  = {de}
}
@article{GrundmannGerhardt1996,
  author    = {Grundmann, Reinhard and Gerhardt, Hans Joachim},
  title     = {Hart im Wind - Windger{\"a}usche an Fassadenelementen},
  series = {db deutsche bauzeitung. 130 (1996), H. 8},
  journal   = {db deutsche bauzeitung. 130 (1996), H. 8},
  pages     = {96 -- 98},
  year      = {1996},
  language  = {de}
}
@article{GrundmannKramerHilge1986,
  author    = {Grundmann, Reinhard and Kramer, C. and Hilge, B.},
  title     = {Prinzipien und Entwurf von Anlagen zur W{\"a}rmebehandlung von Halbzeugen},
  pages     = {129 -- 146},
  year      = {1986},
  language  = {de}
}
@article{GrundmannKramerKonrath2001,
  author    = {Grundmann, Reinhard and Kramer, C. and Konrath, B.},
  title     = {Der Aeroakustik-Fahrzeugwindkanal von Ford.},
  series = {Automobiltechnische Zeitschrift - ATZ. 103 (2001), H. 10},
  journal   = {Automobiltechnische Zeitschrift - ATZ. 103 (2001), H. 10},
  isbn      = {0001-2785},
  pages     = {932 -- 938},
  year      = {2001},
  language  = {de}
}
@article{GrundmannKramer1991,
  author    = {Grundmann, Reinhard and Kramer, Carl},
  title     = {Einheitliche Darstellung von Str{\"o}mungsger{\"a}uschen. Beschreibung der Schalleistung und Darstellung einiger Str{\"o}mungsger{\"a}usche - 2. Teil.},
  series = {HLH - Zeitschrift f{\"u}r Heizung, L{\"u}ftung, Klimatechnik, Haustechnik. 42 (1991), H. 4},
  journal   = {HLH - Zeitschrift f{\"u}r Heizung, L{\"u}ftung, Klimatechnik, Haustechnik. 42 (1991), H. 4},
  isbn      = {0017-9906},
  pages     = {275 -- 281},
  year      = {1991},
  language  = {de}
}
@article{GrundmannKramer1991,
  author    = {Grundmann, Reinhard and Kramer, Carl},
  title     = {Einheitliche Darstellung von Str{\"o}mungsger{\"a}uschen. Beschreibung der Schalleistung und Darstellung einiger Str{\"o}mungsger{\"a}usche. 1. Teil.},
  series = {HLH - Zeitschrift f{\"u}r Heizung, L{\"u}ftung, Klimatechnik, Haustechnik. 42 (1991), H. 3},
  journal   = {HLH - Zeitschrift f{\"u}r Heizung, L{\"u}ftung, Klimatechnik, Haustechnik. 42 (1991), H. 3},
  isbn      = {0017-9906},
  pages     = {233 -- 238},
  year      = {1991},
  language  = {de}
}
@article{GrundmannKramer1995,
  author    = {Grundmann, Reinhard and Kramer, Carl},
  title     = {Entwurfskriterien f{\"u}r Aeroakustik-Windkan{\"a}le und M{\"o}glichkeiten zur Nachr{\"u}stung bestehender Windkan{\"a}le \&\#61607; Entwurfskriterien f{\"u}r Aeroakustik-Windkan{\"a}le und M{\"o}glichkeiten zur Nachr{\"u}stung bestehender Windkan{\"a}le},
  series = {Akustik und Aerodynamik des Kraftfahrzeuges : Grundlagen - Optimierungsmethoden - Meß- und Versuchstechnik ; mit 11 Tabellen und 243 Literaturstellen ; [Beitr{\"a}ge der Tagung 'Akustik und Aerodynamik des Kraftfahrzeuges' ... am 1. und 2. Februar 1994] / Sye},
  journal   = {Akustik und Aerodynamik des Kraftfahrzeuges : Grundlagen - Optimierungsmethoden - Meß- und Versuchstechnik ; mit 11 Tabellen und 243 Literaturstellen ; [Beitr{\"a}ge der Tagung 'Akustik und Aerodynamik des Kraftfahrzeuges' ... am 1. und 2. Februar 1994] / Sye},
  publisher = {Expert-Verl.},
  address   = {Renningen-Malmsheim},
  isbn      = {3-8169-1190-0},
  pages     = {377 -- 394},
  year      = {1995},
  language  = {de}
}
@article{GrundmannKramerGerhardt1989,
  author    = {Grundmann, Reinhard and Kramer, Carl and Gerhardt, Hans Joachim},
  title     = {Zonenabsaugung und Bel{\"u}ftung f{\"u}r eine Produktionshalle mit zeitweilig auftretender hoher Staubentwicklung},
  series = {DKV-Tagungsbericht, Deutscher K{\"a}lte- und Klimatechnischer Verein. 4 (1989)},
  journal   = {DKV-Tagungsbericht, Deutscher K{\"a}lte- und Klimatechnischer Verein. 4 (1989)},
  isbn      = {0172-8849},
  pages     = {981 -- 998},
  year      = {1989},
  language  = {de}
}
@article{HaagZontarSchleupenetal.2014,
  author    = {Haag, S. and Zontar, D. and Schleupen, Josef and M{\"u}ller, T. and Brecher, C.},
  title     = {Chain of refined perception in self-optimizing assembly of micro-optical systems},
  series = {Journal of sensors and sensor systems},
  volume    = {3},
  journal   = {Journal of sensors and sensor systems},
  number    = {1},
  publisher = {Copernicus Publ.},
  address   = {G{\"o}ttingen},
  issn      = {2194-878X},
  doi       = {10.5194/jsss-3-87-2014},
  pages     = {87 -- 95},
  year      = {2014},
  abstract  = {Today, the assembly of laser systems requires a large share of manual operations due to its complexity regarding the optimal alignment of optics. Although the feasibility of automated alignment of laser optics has been shown in research labs, the development effort for the automation of assembly does not meet economic requirements - especially for low-volume laser production. This paper presents a model-based and sensor-integrated assembly execution approach for flexible assembly cells consisting of a macro-positioner covering a large workspace and a compact micromanipulator with camera attached to the positioner. In order to make full use of available models from computer-aided design (CAD) and optical simulation, sensor systems at different levels of accuracy are used for matching perceived information with model data. This approach is named "chain of refined perception", and it allows for automated planning of complex assembly tasks along all major phases of assembly such as collision-free path planning, part feeding, and active and passive alignment. The focus of the paper is put on the in-process image-based metrology and information extraction used for identifying and calibrating local coordinate systems as well as the exploitation of that information for a part feeding process for micro-optics. Results will be presented regarding the processes of automated calibration of the robot camera as well as the local coordinate systems of part feeding area and robot base.},
  language  = {en}
}
@article{Hanrath1989,
  author    = {Hanrath, Wilhelm},
  title     = {Character tables of some factor groups of space groups},
  series = {Perfect groups / Derek F. Holt and W. Plesken},
  journal   = {Perfect groups / Derek F. Holt and W. Plesken},
  publisher = {Clarendon Press},
  address   = {Oxford},
  isbn      = {0-19-853559-7},
  pages     = {357 -- 359},
  year      = {1989},
  language  = {en}
}
@article{HanrathPlesken1985,
  author    = {Hanrath, Wilhelm and Plesken, Wilhelm},
  title     = {Group rings and irreducible representations of space groups / by W. Hanrath and W. Plesken},
  series = {Journal f{\"u}r die reine und angewandte Mathematik. 362 (1985)},
  journal   = {Journal f{\"u}r die reine und angewandte Mathematik. 362 (1985)},
  isbn      = {0075-4102},
  pages     = {130 -- 140},
  year      = {1985},
  language  = {en}
}
@article{HanrathPlesken1984,
  author    = {Hanrath, Wilhelm and Plesken, Wilhelm},
  title     = {The lattices of six-dimensional euclidean space},
  series = {Mathematics of computation. 43 (1984), H. 168},
  journal   = {Mathematics of computation. 43 (1984), H. 168},
  isbn      = {0025-5718},
  pages     = {573 -- 587},
  year      = {1984},
  language  = {en}
}
@article{HaselgruberMautnerThiele2010,
  author    = {Haselgruber, Nikolaus and Mautner, Karin and Thiele, Jan},
  title     = {Usage Space Analysis for Reliability Testing},
  series = {Quality and Reliability Engineering International},
  volume    = {26},
  journal   = {Quality and Reliability Engineering International},
  number    = {8},
  publisher = {Wiley},
  address   = {New York},
  issn      = {1099-1638},
  doi       = {10.1002/qre.1155},
  pages     = {877 -- 885},
  year      = {2010},
  abstract  = {During the development process of a complex technical product, one widely used and important technique is accelerated testing where the applied stress on a component is chosen to exceed the reference stress, i.e. the stress encountered in field operation, in order to reduce the time to failure. For that, the reference stress has to be known. Since a complex technical product may fail regarding numerous failure modes, stress in general is highly dimensional rather than scalar. In addition, customers use their products individually, i.e. field operation should be described by a distribution rather than by one scalar stress value. In this paper, a way to span the customer usage space is shown. It allows the identification of worst case reference stress profiles in significantly reduced dimensions with minimal loss of information. The application example shows that even for a complex product like a combustion engine, stress information can be compressed significantly. With low measurement effort it turned out that only three reference stress cycles were sufficient to cover a broad range of customer stress variety.},
  language  = {en}
}
@article{Heinrichs1992,
  author    = {Heinrichs, Horst},
  title     = {STEP bietet mehr},
  publisher = {IKOSS},
  address   = {Stuttgart},
  pages     = {327 -- 344},
  year      = {1992},
  language  = {de}
}
@article{Heinrichs1993,
  author    = {Heinrichs, Horst},
  title     = {Mit Grafik schafft FEM den Durchbruch},
  series = {Maschinen, Anlagen, Verfahren (1993)},
  journal   = {Maschinen, Anlagen, Verfahren (1993)},
  isbn      = {0343-043X},
  pages     = {58 -- 59},
  year      = {1993},
  language  = {de}
}
@article{Heinrichs1989,
  author    = {Heinrichs, Horst},
  title     = {Verbindung von CAD und CAE mittels der systemneutralen CAD I Schnittstelle},
  pages     = {391 -- 408},
  year      = {1989},
  language  = {de}
}
@article{Heinrichs1981,
  author    = {Heinrichs, Horst},
  title     = {Graphische Datenverarbeitung bei FEM-Berechnungen von Maschinen : interaktive Geometrieerfassung u. Netzwerkerstellung},
  pages     = {III, 123 S. : graph. Darst.},
  year      = {1981},
  language  = {de}
}
@article{Heinrichs1983,
  author    = {Heinrichs, Horst},
  title     = {Graphisch interaktive FE-Netzwerksgenerierung mit dem Programm FEDIG auf Rechnern ab 64 KB-Memory mit Digitizer},
  series = {IKO Software Service. 12 (1983)},
  journal   = {IKO Software Service. 12 (1983)},
  pages     = {191 -- 215},
  year      = {1983},
  language  = {de}
}
@article{Heinrichs1984,
  author    = {Heinrichs, Horst},
  title     = {Graphisch interaktiver FEM-Berechnungsarbeitsplatz},
  series = {Konstruktion, Elemente, Methoden. 21 (1984), H. 2},
  journal   = {Konstruktion, Elemente, Methoden. 21 (1984), H. 2},
  pages     = {82 -- 85},
  year      = {1984},
  language  = {de}
}
@article{HeinrichsHaub1991,
  author    = {Heinrichs, Horst and Haub, A.},
  title     = {Grafische Oberfl{\"a}chen vereinfachen den FEM-Einsatz},
  series = {CAD-CAM Report. 10 (1991), H. 3},
  journal   = {CAD-CAM Report. 10 (1991), H. 3},
  pages     = {79 -- 85},
  year      = {1991},
  language  = {de}
}
@article{HeinrichsSteinke1981,
  author    = {Heinrichs, Horst and Steinke, P.},
  title     = {Praxisgerechter Einsatz der Finite-Element-Methode zur Bauteilanalyse},
  series = {Industrie Anzeiger. 103 (1981), H. 79},
  journal   = {Industrie Anzeiger. 103 (1981), H. 79},
  pages     = {42 -- 43},
  year      = {1981},
  language  = {de}
}
@article{HeinrichsWeck1981,
  author    = {Heinrichs, Horst and Weck, H.},
  title     = {Efficient finite-element structural analysis by interactive graphic mesh generation},
  series = {CIRP Annals. 30 (1981), H. 1},
  journal   = {CIRP Annals. 30 (1981), H. 1},
  pages     = {279 -- 284},
  year      = {1981},
  language  = {en}
}
@article{HeinrichsWeck1981,
  author    = {Heinrichs, Horst and Weck, M.},
  title     = {Wirtschaftliche FEM-Strukturanalyse durch graphisch interaktive Netzaufbereitung},
  series = {Industrie Anzeiger. 103 (1981), H. 79},
  journal   = {Industrie Anzeiger. 103 (1981), H. 79},
  pages     = {16 -- 20},
  year      = {1981},
  language  = {de}
}
@article{HeinrichsWeck1979,
  author    = {Heinrichs, Horst and Weck, M.},
  title     = {Problemloesungen im Rahmen der konstruktiven Gestaltung},
  series = {Industrieanzeiger. 101 (1979), H. 73},
  journal   = {Industrieanzeiger. 101 (1979), H. 73},
  pages     = {26 -- 29},
  year      = {1979},
  language  = {de}
}
@article{HeinrichsWeck1977,
  author    = {Heinrichs, Horst and Weck, M.},
  title     = {Rechnerunterstuetzte Aufbereitung von Finite-Elemente-Rechenmodellen -Erstellen der FEM-Netzwerke},
  series = {Industrieanzeiger. 99 (1977), H. 102},
  journal   = {Industrieanzeiger. 99 (1977), H. 102},
  pages     = {2059 -- 2061},
  year      = {1977},
  language  = {de}
}
@article{HeinrichsWeckHeimann1977,
  author    = {Heinrichs, Horst and Weck, M. and Heimann, A.},
  title     = {Rechnerunterstuetzte Aufbereitung von Finite-Elemente-Rechenmodellen-Erfassung der Bauteilgeometrie},
  series = {Industrieanzeiger. 99 (1977), H. 78},
  journal   = {Industrieanzeiger. 99 (1977), H. 78},
  pages     = {1509 -- 1512},
  year      = {1977},
  language  = {de}
}
@article{HennPolaczek2007,
  author    = {Henn, Gudrun and Polaczek, Christa},
  title     = {Studienerfolg in den Ingenieurwissenschaften},
  series = {Das Hochschulwesen : HSW ; Forum f{\"u}r Hochschulforschung, -praxis und -politik},
  volume    = {55},
  journal   = {Das Hochschulwesen : HSW ; Forum f{\"u}r Hochschulforschung, -praxis und -politik},
  number    = {5},
  issn      = {0018-2974},
  pages     = {144 -- 147},
  year      = {2007},
  language  = {de}
}
@article{HeptnerWollert2005,
  author    = {Heptner, K. and Wollert, J{\"o}rg},
  title     = {FML-Report - VDI-Richtlinie 4485 'E-Commerce und Logistik'},
  series = {Logistik f{\"u}r Unternehmen : das Fachmagazin der internen und externen Logistik},
  volume    = {19},
  journal   = {Logistik f{\"u}r Unternehmen : das Fachmagazin der internen und externen Logistik},
  issn      = {0930-7834},
  pages     = {58 -- 59},
  year      = {2005},
  language  = {de}
}
@article{HuberStreblowMuelleretal.2014,
  author    = {Huber, M. and Streblow, R. and M{\"u}ller, D. and Lange, S. and Joneleit, R. and Sefker, T. and Rau, Sebastian and Wollert, J{\"o}rg},
  title     = {Funksignal{\"u}bertragung in Luftleitungen},
  series = {HLH : L{\"u}ftung, Klima, Heizung, Sanit{\"a}r, Geb{\"a}udetechnik},
  volume    = {Bd. 65},
  journal   = {HLH : L{\"u}ftung, Klima, Heizung, Sanit{\"a}r, Geb{\"a}udetechnik},
  number    = {H. 7/8},
  issn      = {1436-5103},
  pages     = {36 -- 40},
  year      = {2014},
  language  = {de}
}
@article{HoetterFateriGebhardt2012,
  author    = {H{\"o}tter, Jan-Steffen and Fateri, Miranda and Gebhardt, Andreas},
  title     = {Prozessoptimierung des SLM-Prozesses mit hoch-reflektiven und thermisch sehr gut leitenden Materialien durch systematische Parameterfindung und begleitende Simulationen am Beispiel von Silber},
  series = {RTejournal - Forum f{\"u}r Rapid Technologie},
  volume    = {9},
  journal   = {RTejournal - Forum f{\"u}r Rapid Technologie},
  number    = {1},
  publisher = {Fachhoschule Aachen},
  address   = {Aachen},
  issn      = {1614-0923},
  url       = {http://nbn-resolving.de/urn:nbn:de:0009-2-33639},
  pages     = {1 -- 14},
  year      = {2012},
  abstract  = {Additive Manufacturing durch Aufschmelzen von Metallpulvern hat sich auf breiter Front als Herstellverfahren, auch f{\"u}r Endprodukte, etabliert. Besonders f{\"u}r die Variante des Selective Laser Melting (SLM) sind Anwendungen in der Zahntechnik bereits weit verbreitet und der Einsatz in sensitiven Branchen wie der Luftfahrt ist in greifbare N{\"a}he ger{\"u}ckt. Deshalb werden auch vermehrt Anstrengungen unternommen, um bisher nicht verarbeitete Materialien zu qualifizieren. Dies sind vorzugsweise Nicht-Eisen- und Edelmetalle, die sowohl eine sehr hohe Reflektivit{\"a}t als auch eine sehr gute W{\"a}rmeleitf{\"a}higkeit aufweisen - beides Eigenschaften, die die Beherrschung des Laser-Schmelzprozesses erschweren und nur kleine Prozessfenster zulassen. Die Arbeitsgruppe SLM des Lehr- und Forschungsgebietes Hochleistungsverfahren der Fertigungstechnik hat sich unter der Randbedingung einer kleinen und mit geringer Laserleistung ausgestatteten SLM Maschine der Aufgabe gewidmet und am Beispiel von Silber die Parameterfelder f{\"u}r Einzelspuren und wenig komplexe Geometrien systematisch untersucht. Die Arbeiten wurden von FEM Simulationen begleitet und durch metallographische Untersuchungen verifiziert. Die Ergebnisse bilden die Grundlage zur schnellen Parameterfindung bei komplexen Geometrien und bei Ver{\"a}nderungen der Zusammensetzung, wie sie bei zuk{\"u}nftigen Legierungen zu erwarten sind. Die Ergebnisse werden exemplarisch auf unterschiedliche Geometrien angewandt und entsprechende Bauteile gezeigt.},
  language  = {de}
}
@article{HoetterFateriGebhardt2012,
  author    = {H{\"o}tter, Jan-Steffen and Fateri, Miranda and Gebhardt, Andreas},
  title     = {Selective laser melting of metals: desktop machines open up new chances even for small companies},
  series = {Advanced materials research},
  volume    = {622-623},
  journal   = {Advanced materials research},
  publisher = {Trans Tech Publ.},
  address   = {Baech},
  issn      = {1662-8985 (E-Journal); 1022-6680 (Print)},
  doi       = {10.4028/www.scientific.net/AMR.622-623.461},
  pages     = {461 -- 465},
  year      = {2012},
  abstract  = {Additive manufacturing (AM) of metal parts by using Selective Laser Melting (SLM) has become a powerful tool mostly in the area of automotive, aerospace engineering and others. Especially in the field of dentistry, jewelry and related branches that require individualized or even one-of-a-kind products, the direct digital manufacturing process opens up new ways of design and manufacturing. In these fields, mostly small and medium sized businesses (SME) are operating which do not have sufficient human and economic resources to invest in this technology. But to stay competitive, the application of AM can be regarded as a necessity. In this situation a new desktop machine (Realizer SLM 50) was introduced that cost about 1/3 of a shop floor SLM machine and promises small quality parts. To find out whether the machine really is an alternative for SMEs the University of Applied Science, Aachen, Germany, designed, build and optimized typical parts from the dentistry and the jewelry branches using CoCr and silver material, the latter being new with this application. The paper describes the SLM procedure and how to find and optimize the most important parameters. The test is accompanied by digital simulation in order to verify the build parameters and to plan future builds. The procedure is shown as well as the resulting parts made from CoCr and silver material.},
  language  = {en}
}
@article{KallweitAbromeitDuesetal.1994,
  author    = {Kallweit, Stephan and Abromeit, W. and Dues, M. and Siekmann, H.},
  title     = {Anwendung der LDA zur Untersuchung der instation{\"a}ren Str{\"o}mung im Nachleitrad einer axialen Kreiselpumpenstufe / Abromeit, W. ; Dues, M. ; Siekmann, H. ; Kallweit, S.},
  series = {Lasermethoden in der Str{\"o}mungsmesstechnik, 3. Fachtagung der Deutschen Gesellschaft f{\"u}r Laser-Anemometrie (GALA), Bremen, DE, 5.-7. Sep, 1994},
  journal   = {Lasermethoden in der Str{\"o}mungsmesstechnik, 3. Fachtagung der Deutschen Gesellschaft f{\"u}r Laser-Anemometrie (GALA), Bremen, DE, 5.-7. Sep, 1994},
  publisher = {Shaker},
  address   = {Aachen},
  isbn      = {3-8265-0162-4},
  pages     = {27.1 -- 27.6},
  year      = {1994},
  language  = {de}
}
@article{KallweitDuesSiekmann1994,
  author    = {Kallweit, Stephan and Dues, M. and Siekmann, H.},
  title     = {Particle-Image-Velocimetry (PIV) in rotierenden Maschinen / Dues, M. ; Kallweit, S. ; Siekmann, H.},
  series = {Lasermethoden in der Str{\"o}mungsmesstechnik, 3. Fachtagung der Deutschen Gesellschaft f{\"u}r Laser-Anemometrie (GALA), Bremen, DE, 5.-7. Sep, 1994},
  journal   = {Lasermethoden in der Str{\"o}mungsmesstechnik, 3. Fachtagung der Deutschen Gesellschaft f{\"u}r Laser-Anemometrie (GALA), Bremen, DE, 5.-7. Sep, 1994},
  publisher = {Shaker},
  address   = {Aachen},
  isbn      = {3-8265-0162-4},
  pages     = {19.1 -- 19-5},
  year      = {1994},
  language  = {en}
}
@article{KallweitDuesSiekmann1994,
  author    = {Kallweit, Stephan and Dues, M. W. and Siekmann, H. E.},
  title     = {Spectral Analysis of Pressure Fluctuations and Velocity Fields as Investigated on Propeller Pumps / Dues, M. W. ; Kallweit, S. D. ; Siekmann, H. E.},
  series = {Preprints : Fifth International Symposium on Transport Phenomena and Dynamics of Rotating Machinery (ISROMAC-5) : May 8 - 11, 1994, Maui Marriott Hotel, Kaanapali, Maui, Hawaii, U.S.A / sponsored by Pacific Center of Thermal-Fluids Engineering. [W.-J. Yang, chairman] / Vol. B.},
  journal   = {Preprints : Fifth International Symposium on Transport Phenomena and Dynamics of Rotating Machinery (ISROMAC-5) : May 8 - 11, 1994, Maui Marriott Hotel, Kaanapali, Maui, Hawaii, U.S.A / sponsored by Pacific Center of Thermal-Fluids Engineering. [W.-J. Yang, chairman] / Vol. B.},
  pages     = {98 -- 112},
  year      = {1994},
  language  = {en}
}
@article{KallweitDuesMuelleretal.2007,
  author    = {Kallweit, Stephan and Dues, Michael and M{\"u}ller, Ulli and Lederer, Thomas},
  title     = {Einsatz der Particle Image Velocimetry zur Untersuchung von Rohrstr{\"o}mungen / Kallweit, Stephan ; Dues, Michael ; M{\"u}ller, Ulli ; Lederer, Thomas ; Schroll, Michael ; Willert, Christian},
  series = {Lasermethoden in der Str{\"o}mungsmesstechnik: 15. Fachtagung 2007 Rostock / Hrsg.: Alfred Leder ....},
  journal   = {Lasermethoden in der Str{\"o}mungsmesstechnik: 15. Fachtagung 2007 Rostock / Hrsg.: Alfred Leder ....},
  isbn      = {978-3-86009-007-7},
  pages     = {35},
  year      = {2007},
  language  = {de}
}
@article{KallweitDuesRadke1994,
  author    = {Kallweit, Stephan and Dues, Michael and Radke, Michael},
  title     = {M{\"o}glichkeiten und Grenzen laseroptischer Verfahren zur Untersuchung hydraulischer Str{\"o}mungsmaschinen / Dues, Michael ; Kallweit, Stephan ; Radke, Michael},
  series = {Forschung im Ingenieurwesen. 60 (1994), H. 11-12},
  journal   = {Forschung im Ingenieurwesen. 60 (1994), H. 11-12},
  isbn      = {0015-7899},
  pages     = {332 -- 336},
  year      = {1994},
  language  = {de}
}
@article{KallweitEbingerDuesetal.1993,
  author    = {Kallweit, Stephan and Ebinger, G. and Dues, M. and Siekmann, H.},
  title     = {Anwendung des Laserlichtschnitt-Verfahrens zur qualitativen Untersuchung der Durchstr{\"o}mung von Kreiselpumpen / Ebinger, G. ; Kallweit, S. ; Dues, M. ; Siekmann, H.},
  series = {Lasermethoden in der Str{\"o}mungsmesstechnik, 2. Fachtagung der Deutschen Gesellschaft f{\"u}r Laser-Anemometrie (GALA), PTB Braunschweig, DE, 14.-16. Sep, 1993},
  journal   = {Lasermethoden in der Str{\"o}mungsmesstechnik, 2. Fachtagung der Deutschen Gesellschaft f{\"u}r Laser-Anemometrie (GALA), PTB Braunschweig, DE, 14.-16. Sep, 1993},
  publisher = {Shaker},
  address   = {Aachen},
  isbn      = {3-86111-595-6},
  pages     = {37.1 -- 37.4},
  year      = {1993},
  language  = {de}
}
@article{KallweitHelbingOrglmeisteretal.1994,
  author    = {Kallweit, Stephan and Helbing, M. and Orglmeister, R. and Siekmann, H. E.},
  title     = {Image Processing Techniques with Neural Networks for Flow Visualization in Rotating Machinery / Helbing, M. ; Orgimeiste, R. [Orglmeister, R.] ; Kallweit, S. ; Siekmann, H. E. ; Dues, M. ; Cronemeyer, J.},
  series = {FLUCOME '94 : the 4th Triennial International Symposium on Fluid Control, Measurement and Visualization; August 29 - September 1, 1994, Toulouse, France, International Congress Centre, DIGORA-Lab{\`e}ge / CERT/ONERA. General chairman Patrick Hebrard},
  journal   = {FLUCOME '94 : the 4th Triennial International Symposium on Fluid Control, Measurement and Visualization; August 29 - September 1, 1994, Toulouse, France, International Congress Centre, DIGORA-Lab{\`e}ge / CERT/ONERA. General chairman Patrick Hebrard},
  address   = {Toulouse},
  pages     = {87 -- 94},
  year      = {1994},
  language  = {en}
}
@article{KallweitKaminskyCanneytetal.2007,
  author    = {Kallweit, Stephan and Kaminsky, R. and Canneyt, C. van and Eloot, S.},
  title     = {High-Speed und Stereo-PIV in einem k{\"u}nstlichen Blutgef{\"a}ß / Kallweit, S. ; Kaminsky, R. ; Canneyt, C. van ; Eloot, S.},
  series = {Lasermethoden in der Str{\"o}mungsmesstechnik: 15. Fachtagung 2007 Rostock / Hrsg.: Alfred Leder ....},
  journal   = {Lasermethoden in der Str{\"o}mungsmesstechnik: 15. Fachtagung 2007 Rostock / Hrsg.: Alfred Leder ....},
  isbn      = {978-3-86009-007-7},
  pages     = {48},
  year      = {2007},
  language  = {de}
}
@article{KallweitKaminskyRossietal.2005,
  author    = {Kallweit, Stephan and Kaminsky, R. and Rossi, M. and Morbiducci, U.},
  title     = {Time resolved PIV technique for high temporal resolution measurements of prosthetic heart valves fluid dynamics / Kaminsky, R. ; Rossi, M. ; Morbiducci, U. ; Scalise, L. ; Catellini, P. ; Kallweit, S. ; Verdonck, P. ; Grigioni, M.},
  series = {The International Journal of Artificial Organs. 28 (2005), H. 9},
  journal   = {The International Journal of Artificial Organs. 28 (2005), H. 9},
  isbn      = {1724-6040},
  pages     = {946},
  year      = {2005},
  language  = {en}
}
@article{KallweitKaminskyRossietal.2005,
  author    = {Kallweit, Stephan and Kaminsky, R. and Rossi, M. and Morbiducci, U.},
  title     = {2D PIV Study of the flow downstream : Two prototypes of a ney monoleaflet artificial aortic heart valve prosthesis / Kaminsky, R. ; Kramm, K. ; Weber, H. J. ; Simons, A. P. ; Kallweit, S. ; Verdonck, P. R.},
  series = {The International Journal of Artificial Organs. 28 (2005), H. 9},
  journal   = {The International Journal of Artificial Organs. 28 (2005), H. 9},
  isbn      = {1724-6040},
  pages     = {921},
  year      = {2005},
  language  = {en}
}
@article{KallweitKaminskyRossietal.2005,
  author    = {Kallweit, Stephan and Kaminsky, R. and Rossi, M. and Morbiducci, U.},
  title     = {3D PIV measurements of prosthetic heart valve dynamics / Kaminsky, R. ; Rossi, M. ; Morbiducci, U. ; Scalise, L. ; Castellini, P. ; Kallweit, S. ; Verdonck, P. ; Grigioni, M.},
  series = {The International Journal of Artificial Organs. 28 (2005), H. 9},
  journal   = {The International Journal of Artificial Organs. 28 (2005), H. 9},
  isbn      = {1724-6040},
  pages     = {868},
  year      = {2005},
  language  = {en}
}
@article{KallweitKaminskyRossietal.2005,
  author    = {Kallweit, Stephan and Kaminsky, R. and Rossi, M. and Scalise, L.},
  title     = {PIV Measurements with high temporal Resolution behind Artificial Heart Valves / Kaminsky, R. ; Rossi, M. ; Scalise, L. ; Kallweit, S. ; Verdonck, P.},
  series = {Proceedings of the 6th International Symposium on Particle Image Velocimetry},
  journal   = {Proceedings of the 6th International Symposium on Particle Image Velocimetry},
  publisher = {Caltech},
  address   = {Pasadena, CA},
  year      = {2005},
  language  = {en}
}
@article{KallweitKaminskyRossietal.2008,
  author    = {Kallweit, Stephan and Kaminsky, Radoslav and Rossi, Massimiliano and Morbiducci, Umberto},
  title     = {PIV Measurements of Flows in Artificial Heart Valves / Kaminsky, Radoslav ; Kallweit, Stephan ; Rossi, Massimiliano ; Morbiducci, Umberto ; Scalise, Lorenzo},
  series = {Particle Image Velocimetry - New Developments and Recent Applications},
  journal   = {Particle Image Velocimetry - New Developments and Recent Applications},
  isbn      = {978-3-540-73528-1},
  pages     = {55 -- 72},
  year      = {2008},
  language  = {en}
}
@article{KallweitKisifeUtzenradetal.2008,
  author    = {Kallweit, Stephan and Kisife, F. and Utzenrad, M. and Weber, J.},
  title     = {Hispeed Scanning Stereo PIV hinter einer k{\"u}nstlichen Herzklappe / Kallweit, S. ; Kisife, F. ; Utzenrad, M. ; Weber, J.},
  series = {Lasermethoden in der Str{\"o}mungsmesstechnik : 16. Fachtagung, 9. - 11. September 2008, Karlsruhe / veranst. von der Deutschen Gesellschaft f{\"u}r Laser-Anemometrie GALA e.V. Hrsg.: B. Ruck},
  journal   = {Lasermethoden in der Str{\"o}mungsmesstechnik : 16. Fachtagung, 9. - 11. September 2008, Karlsruhe / veranst. von der Deutschen Gesellschaft f{\"u}r Laser-Anemometrie GALA e.V. Hrsg.: B. Ruck},
  publisher = {GALA e.V.},
  address   = {Karlsruhe},
  isbn      = {978-3-9805613-4-1},
  pages     = {29},
  year      = {2008},
  language  = {de}
}
@article{KallweitKorculaninFroehligetal.2011,
  author    = {Kallweit, Stephan and Korculanin, O. and Fr{\"o}hlig, F. and Gabi, M. and Mattern, P.},
  title     = {Photogrammetrische Rekonstruktion von Partikelpositionen mittels R{\"u}ckprojektion f{\"u}r 3D-PIV},
  series = {Lasermethoden in der Str{\"o}mungsmesstechnik : 19. Fachtagung, 6. - 8. September 2011, Ilmenau ; [Tagungsband enth{\"a}lt ... Beitr{\"a}ge, die anl{\"a}sslich der 19. Fachtagaung "Lasermethoden in der Str{\"o}mungsmesstechnik" ... vorgetragen und diskutiert wurden] / veranst. von der Deutschen Gesellschaft f{\"u}r Laser-Anemometrie GALA e.V. Hrsg. A. Thess...},
  journal   = {Lasermethoden in der Str{\"o}mungsmesstechnik : 19. Fachtagung, 6. - 8. September 2011, Ilmenau ; [Tagungsband enth{\"a}lt ... Beitr{\"a}ge, die anl{\"a}sslich der 19. Fachtagaung "Lasermethoden in der Str{\"o}mungsmesstechnik" ... vorgetragen und diskutiert wurden] / veranst. von der Deutschen Gesellschaft f{\"u}r Laser-Anemometrie GALA e.V. Hrsg. A. Thess...},
  publisher = {Dt. Ges. f{\"u}r Laser-AnemometrieGALA e. V.},
  address   = {Karlsruhe},
  isbn      = {978-3-9805613-7-2},
  pages     = {28/1 -- 28/6},
  year      = {2011},
  language  = {de}
}
@article{KallweitSchimpf2003,
  author    = {Kallweit, Stephan and Schimpf, Axel},
  title     = {Photogrammetric Particle Image Velocimetry / Schimpf, Axel ; Kallweit, Stephan},
  series = {Particle image velocimetry : recent improvements; proceedings of the Europiv 2 Workshop held in Zaragoza, Spain, March 31 - April 1, 2003 / edited by M. Stanislas ...},
  journal   = {Particle image velocimetry : recent improvements; proceedings of the Europiv 2 Workshop held in Zaragoza, Spain, March 31 - April 1, 2003 / edited by M. Stanislas ...},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {3-540-21423-2},
  pages     = {295},
  year      = {2003},
  language  = {en}
}
@article{KallweitUchiyamaSiekmann1998,
  author    = {Kallweit, Stephan and Uchiyama, R. and Siekmann, H.},
  title     = {Fault Diagnostic Method for Pump Running Conditions Based on Process Modeling and Neural Network / Uchiyama, R. ; Kallweit, S. ; Siekmann, H.},
  series = {International Journal of Rotating Machinery. 4 (1998), H. 1},
  journal   = {International Journal of Rotating Machinery. 4 (1998), H. 1},
  isbn      = {1542-3034},
  pages     = {49 -- 59},
  year      = {1998},
  language  = {en}
}