@article{KallweitVanlanduitVanherzeeleetal.2007,
  author    = {Kallweit, Stephan and Vanlanduit, S. and Vanherzeele, J. and Brouns, M.},
  title     = {Time resolved PIV reconstruction of periodic flows / Vanlanduit, S. ; Vanherzeele, J. ; Kallweit, S. ; Brouns, M. ; Guillaume, P.},
  series = {PIV'07, 7th International Symposium on Particle Image Velocimetry, Roma, IT, Sep 11-14, 2007},
  journal   = {PIV'07, 7th International Symposium on Particle Image Velocimetry, Roma, IT, Sep 11-14, 2007},
  pages     = {1 -- 14},
  year      = {2007},
  language  = {en}
}
@article{KallweitWillertDuesetal.2008,
  author    = {Kallweit, Stephan and Willert, Chris and Dues, Michael and M{\"u}ller, Ulrich},
  title     = {PIV for Volume Flow Metering / Kallweit, Stephan ; Willert, Chris ; Dues, Michael ; M{\"u}ller, Ulrich ; Lederer, Thomas},
  pages     = {6 S.},
  year      = {2008},
  language  = {en}
}
@article{KampkerSchleserTriebsetal.2018,
  author    = {Kampker, Achim and Schleser, Markus and Triebs, Johannes and Berg, Alexander-Karl and Hansen, Jan Ole and Fiedler, Falko},
  title     = {Bauteilintegrierte Vorrichtungsfunktionen im Karosseriebau : Aktuelle Ergebnisse im Forschungsprojekt ProeK},
  series = {ZWF Zeitschrift f{\"u}r wirtschaftlichen Fabrikbetrieb},
  volume    = {113},
  journal   = {ZWF Zeitschrift f{\"u}r wirtschaftlichen Fabrikbetrieb},
  number    = {11},
  publisher = {De Gruyter},
  address   = {Berlin},
  issn      = {0947-0085},
  doi       = {10.3139/104.112012},
  pages     = {767 -- 770},
  year      = {2018},
  abstract  = {Das Forschungsprojekt Produktionseffizienz in der Kleinserie (ProeK) erarbeitet kosteng{\"u}nstige und effiziente L{\"o}sungsans{\"a}tze f{\"u}r Prozessketten im Zukunftsfeld der Elektromobilit{\"a}t. Das Teilprojekt Karosserie setzt diese Zielsetzung durch innovative und praxisorientierte Produkt- und Prozesskonzepte mit neuartigen bauteilintegrierten Vorrichtungsfunktionen (BiV) um. Im Teilprojekt Außenhaut sollen Toleranzen adaptiv durch Anpassungen der Prozessparameter sowie Bauteilmanipulation kompensiert werden.},
  language  = {de}
}
@article{KaschSchmidtJahnetal.2021,
  author    = {Kasch, Susanne and Schmidt, Thomas and Jahn, Simon and Eichler, Fabian and Thurn, Laura and Bremen, Sebastian},
  title     = {L{\"o}sungsans{\"a}tze und Verfahrenskonzepte zum Laserstrahlschmelzen von Glas},
  series = {Schweissen und Schneiden},
  volume    = {73},
  journal   = {Schweissen und Schneiden},
  number    = {Heft 1-2},
  publisher = {DVS Verlag},
  address   = {D{\"u}sseldorf},
  isbn      = {0036-7184},
  pages     = {32 -- 39},
  year      = {2021},
  language  = {de}
}
@article{KesslerBalcGebhardtetal.2015,
  author    = {Kessler, Julia and Balc, Nicolae and Gebhardt, Andreas and Abbas, Karim},
  title     = {Basic Research on Lattice Structures Focused on the Tensile Strength},
  series = {Applied Mechanics and Materials},
  volume    = {Vol. 808},
  journal   = {Applied Mechanics and Materials},
  publisher = {Trans Tech Publications},
  address   = {B{\"a}ch},
  issn      = {1662-7482},
  doi       = {10.4028/www.scientific.net/AMM.808.193},
  pages     = {193 -- 198},
  year      = {2015},
  language  = {en}
}
@article{KilicRaatschenKoerfgenetal.2017,
  author    = {Kilic, S. A. and Raatschen, Hans-J{\"u}rgen and K{\"o}rfgen, B. and Apaydin, N. M. and Astaneh-Asl, A.},
  title     = {FE Model of the Fatih Sultan Mehmet Suspension Bridge Using Thin Shell Finite Elements},
  series = {Arabian Journal for Science and Engineering},
  volume    = {42},
  journal   = {Arabian Journal for Science and Engineering},
  number    = {3},
  publisher = {Springer Nature},
  issn      = {2191-4281},
  doi       = {10.1007/s13369-016-2316-y},
  pages     = {1103 -- 1116},
  year      = {2017},
  abstract  = {This paper presents the results of an eigenvalue analysis of the Fatih Sultan Mehmet Bridge. A high-resolution finite element model was created directly from the available design documents. All physical properties of the structural components were included in detail, so no calibration to the measured data was necessary. The deck and towers were modeled with shell elements. A nonlinear static analysis was performed before the eigenvalue calculation. The calculated natural frequencies and corresponding mode shapes showed good agreement with the available measured ambient vibration data. The calculation of the effective modal mass showed that nine modes had single contributions higher than 5 \% of the total mass. They were in a frequency range up to 1.2 Hz. The comparison of the results for the torsional modes especially demonstrated the advantage of using thin shell finite elements over the beam modeling approach.},
  language  = {en}
}
@article{Klocke1988,
  author    = {Klocke, Martina},
  title     = {Entwicklung der Feinbearbeitung am Institut f{\"u}r Werkzeugmaschinen und Fertigungstechnik der Technischen Universit{\"a}t Berlin / Klocke, M.; Klocke, F. ; Stark, C.},
  series = {Zeitschrift f{\"u}r wirtschaftliche Fertigung: ZwF. 83 (1988), H. 10},
  journal   = {Zeitschrift f{\"u}r wirtschaftliche Fertigung: ZwF. 83 (1988), H. 10},
  isbn      = {0044-3743},
  pages     = {521 -- 529},
  year      = {1988},
  language  = {de}
}
@article{Klocke1995,
  author    = {Klocke, Martina},
  title     = {Die Situation von Ingenieurinnen in Europa - ein L{\"a}ndervergleich},
  series = {Neue Impulse (1995)},
  journal   = {Neue Impulse (1995)},
  isbn      = {0943-4240},
  pages     = {7 -- 16},
  year      = {1995},
  language  = {de}
}
@article{Klocke1995,
  author    = {Klocke, Martina},
  title     = {Angebotsstrukturen und Kosten bzw. Wirtschaftlichkeit von Bildungsangeboten},
  series = {Entwicklung und Umsetzung regionaler Qualifizierungsstrategien : Reader zum Workshop am 21.02.1994 in Berlin / Hrsg.: Bundesinstitut f{\"u}r Berufsbildung. Christel Alt ... (Hrsg.)},
  journal   = {Entwicklung und Umsetzung regionaler Qualifizierungsstrategien : Reader zum Workshop am 21.02.1994 in Berlin / Hrsg.: Bundesinstitut f{\"u}r Berufsbildung. Christel Alt ... (Hrsg.)},
  publisher = {Bertelsmann},
  address   = {Bielefeld},
  isbn      = {3-7639-0531-6},
  pages     = {37 -- 40},
  year      = {1995},
  language  = {de}
}
@article{Klocke1995,
  author    = {Klocke, Martina},
  title     = {Lernfabrik - externer Ort f{\"u}r Personalentwicklung},
  series = {Entwicklung und Umsetzung regionaler Qualifizierungsstrategien : Reader zum Workshop am 21.02.1994 in Berlin / Hrsg.: Bundesinstitut f{\"u}r Berufsbildung. Christel Alt ... (Hrsg.)},
  journal   = {Entwicklung und Umsetzung regionaler Qualifizierungsstrategien : Reader zum Workshop am 21.02.1994 in Berlin / Hrsg.: Bundesinstitut f{\"u}r Berufsbildung. Christel Alt ... (Hrsg.)},
  publisher = {Bertelsmann},
  address   = {Bielefeld},
  isbn      = {3-7639-0531-6},
  pages     = {89 -- 94},
  year      = {1995},
  language  = {de}
}
@article{Klocke1995,
  author    = {Klocke, Martina},
  title     = {Study Units in the CIM-Oriented Study Factory},
  series = {Qualification for Computer-Integrated Manufacturing. Hrsg.: Felix Rauner},
  journal   = {Qualification for Computer-Integrated Manufacturing. Hrsg.: Felix Rauner},
  publisher = {Springer},
  address   = {Berlin [u.a.]},
  isbn      = {3-540-19971-3},
  pages     = {38 -- 51},
  year      = {1995},
  language  = {en}
}
@article{Klocke2000,
  author    = {Klocke, Martina},
  title     = {Kiel - eine Fachhochschule macht Stadtteilarbeit},
  address   = {Kiel},
  year      = {2000},
  language  = {de}
}
@article{Klocke1996,
  author    = {Klocke, Martina},
  title     = {Die Situation von Ingenieurinnen in Europa - ein L{\"a}ndervergleich},
  series = {Berufsziel: Ingenieurin : Aufbruch in die/der Technik / hrsg. von Renate Kosuch},
  journal   = {Berufsziel: Ingenieurin : Aufbruch in die/der Technik / hrsg. von Renate Kosuch},
  publisher = {Deutscher Studien-Verl.},
  address   = {Weinheim},
  isbn      = {3-89271-645-5},
  pages     = {26 -- 38},
  year      = {1996},
  language  = {de}
}
@article{Klocke1993,
  author    = {Klocke, Martina},
  title     = {Lernfabrik - externer Ort f{\"u}r Personalentwicklung?},
  series = {Lean-Management : Potentiale und Erfolge ; mit den Referaten zur 19. Deutschen Industrial-Engeneering-Fachtagung am 2. und 3. Dezember 1993 und weiteren Beitr{\"a}gen zum angewandten Industrial engineering / REFA-IE},
  journal   = {Lean-Management : Potentiale und Erfolge ; mit den Referaten zur 19. Deutschen Industrial-Engeneering-Fachtagung am 2. und 3. Dezember 1993 und weiteren Beitr{\"a}gen zum angewandten Industrial engineering / REFA-IE},
  address   = {Darmstadt},
  pages     = {6/1 -- 6/15},
  year      = {1993},
  language  = {de}
}
@article{Klocke1992,
  author    = {Klocke, Martina},
  title     = {Entwicklung von modularen Lerneinheiten in der CIM-orientierten Lernfabrik},
  series = {CIM, Bedeutung f{\"u}r die Weiterbildung in Klein- und Mittelbetrieben : [Bericht {\"u}ber den EUROTECNET-Workshop "CIM - Bedeutung f{\"u}r die Weiterbildung in Klein- und Mittelbetrieben" vom 16. bis 17. Oktober 1991 in Elmshorn (BR Deutschland)] / [Bericht erstattet von Martina Klocke]},
  journal   = {CIM, Bedeutung f{\"u}r die Weiterbildung in Klein- und Mittelbetrieben : [Bericht {\"u}ber den EUROTECNET-Workshop "CIM - Bedeutung f{\"u}r die Weiterbildung in Klein- und Mittelbetrieben" vom 16. bis 17. Oktober 1991 in Elmshorn (BR Deutschland)] / [Bericht erstattet von Martina Klocke]},
  publisher = {EUROTECNET},
  address   = {Br{\"u}ssel},
  pages     = {49 -- 60},
  year      = {1992},
  language  = {de}
}
@article{Klocke1992,
  author    = {Klocke, Martina},
  title     = {Neue Technologien - eine Herausforderung f{\"u}r Klein- und Mittelbetriebe},
  series = {CIM, Bedeutung f{\"u}r die Weiterbildung in Klein- und Mittelbetrieben : [Bericht {\"u}ber den EUROTECNET-Workshop "CIM - Bedeutung f{\"u}r die Weiterbildung in Klein- und Mittelbetrieben" vom 16. bis 17. Oktober 1991 in Elmshorn (BR Deutschland)] / [Bericht erstattet von Martina Klocke]},
  journal   = {CIM, Bedeutung f{\"u}r die Weiterbildung in Klein- und Mittelbetrieben : [Bericht {\"u}ber den EUROTECNET-Workshop "CIM - Bedeutung f{\"u}r die Weiterbildung in Klein- und Mittelbetrieben" vom 16. bis 17. Oktober 1991 in Elmshorn (BR Deutschland)] / [Bericht erstattet von Martina Klocke]},
  publisher = {EUROTECNET},
  address   = {Br{\"u}ssel},
  pages     = {6 -- 8},
  year      = {1992},
  language  = {de}
}
@article{Klocke1981,
  author    = {Klocke, Martina},
  title     = {CNC-Technik holt auf bei der Feinbearbeitung / Voelmy, M.},
  series = {VDI-Nachrichten (1981)},
  journal   = {VDI-Nachrichten (1981)},
  year      = {1981},
  language  = {de}
}
@article{Klocke2003,
  author    = {Klocke, Martina},
  title     = {Ingenieurinnen dringend gesucht},
  series = {Von der Dampfmaschine zur Brennstoffzelle : 100 Jahre Ingenieurausbildung in Kiel / [Hrsg. Fachhochschule Kiel. Red. Martina Klocke]},
  journal   = {Von der Dampfmaschine zur Brennstoffzelle : 100 Jahre Ingenieurausbildung in Kiel / [Hrsg. Fachhochschule Kiel. Red. Martina Klocke]},
  publisher = {Fachhochschule},
  address   = {Kiel},
  pages     = {52 -- 55},
  year      = {2003},
  language  = {de}
}
@article{Klocke1983,
  author    = {Klocke, Martina},
  title     = {W{\"a}rmebehandlungsanlagen / Voelmy, M.},
  series = {Zeitschrift f{\"u}r wirtschaftliche Fertigung : ZwF. 78 (1983), H. 6},
  journal   = {Zeitschrift f{\"u}r wirtschaftliche Fertigung : ZwF. 78 (1983), H. 6},
  isbn      = {0044-3743},
  pages     = {293 -- 300},
  year      = {1983},
  language  = {de}
}
@article{KlockeJochimsen1996,
  author    = {Klocke, Martina and Jochimsen, P.},
  title     = {Fachhochschulen sind leistungsorientierte Partner der Wirtschaft / Jochimsen, P. ; Klocke, M.},
  series = {Zwischen Ostsee und Nordsee : Wirtschaft im Bezirk der IHK zu Kiel / hrsg. in Zu-sammenarbeit mit der Industrie- und Handelskammer zu Kiel. Red.: Wolf-R{\"u}diger Janzen. 3., v{\"o}llig neue Ausg.},
  journal   = {Zwischen Ostsee und Nordsee : Wirtschaft im Bezirk der IHK zu Kiel / hrsg. in Zu-sammenarbeit mit der Industrie- und Handelskammer zu Kiel. Red.: Wolf-R{\"u}diger Janzen. 3., v{\"o}llig neue Ausg.},
  publisher = {Verl. Kommunikation und Wirtschaft},
  address   = {Oldenburg},
  isbn      = {388363140X},
  pages     = {66 -- 69},
  year      = {1996},
  language  = {de}
}
@article{KlockeLenk1993,
  author    = {Klocke, Martina and Lenk, A.},
  title     = {Hilfe zur Selbsthilfe},
  series = {Lernfeld Betrieb (1993)},
  journal   = {Lernfeld Betrieb (1993)},
  isbn      = {0930-4460},
  pages     = {26 -- 27},
  year      = {1993},
  language  = {de}
}
@article{KlockeLenk1993,
  author    = {Klocke, Martina and Lenk, Antje},
  title     = {Innovationstransfer auf der Basis von Akzeptanz und Zusammenarbeit / Lenk, Antje ; Klocke, Martina},
  series = {Berufsbildung in Wissenschaft und Praxis. BWP. 22 (1993), H. 5},
  journal   = {Berufsbildung in Wissenschaft und Praxis. BWP. 22 (1993), H. 5},
  isbn      = {0341-4515},
  pages     = {43 -- 45},
  year      = {1993},
  language  = {de}
}
@article{KlockeRichertSube2018,
  author    = {Klocke, Martina and Richert, Vera and Sube, Maike},
  title     = {Vier Jahre „Guter Studienstart im Ingenieurbereich": Entwicklung und Perspektiven des „Nullten Semesters" in Aachen},
  series = {Zeitschrift f{\"u}r Beratung und Studium},
  volume    = {13},
  journal   = {Zeitschrift f{\"u}r Beratung und Studium},
  number    = {1},
  publisher = {Universit{\"a}tsverlag Webler},
  address   = {Bielefeld},
  issn      = {1860-3068},
  pages     = {17 -- 22},
  year      = {2018},
  abstract  = {Bereits 2015 wurde in der Zeitschrift „Qualit{\"a}t in der Wissenschaft" (QiW) {\"u}ber das Kooperationsprojekt „Guter Studienstart im Ingenieurbereich", das Orientierungssemester von RWTH und FH Aachen, berichtet. In diesem Artikel legen wir den Schwerpunkt auf die Entwicklung des Projekts in den Jahren 2015 bis 2018 und geben eine R{\"u}ckschau sowie einen Ausblick auf die Entwicklungsperspektiven nach dem offiziellen Projektende.},
  language  = {de}
}
@article{KlockeSpur1985,
  author    = {Klocke, Martina and Spur, G.},
  title     = {Keramografische Untersuchungen an Edelkorundschleifscheiben / Spur, G. ; Klocke, M.},
  series = {Jahrbuch Schleifen, Honen, L{\"a}ppen und Polieren. 53. Ausgab (1985)},
  journal   = {Jahrbuch Schleifen, Honen, L{\"a}ppen und Polieren. 53. Ausgab (1985)},
  isbn      = {0172-245X},
  pages     = {255 -- 267},
  year      = {1985},
  language  = {de}
}
@article{Knepper1985,
  author    = {Knepper, Ludger},
  title     = {Der moderne Luftfrachtverkehr - leistungsfaehig durch seine bodengebundenen Umschlagssysteme},
  pages     = {60 -- 69},
  year      = {1985},
  language  = {de}
}
@article{Knepper1985,
  author    = {Knepper, Ludger},
  title     = {Hochregallager fuer Luftfracht - 365 Tage pro Jahr in Betrieb},
  series = {Foerdern und Heben. 35 (1985), H. 5},
  journal   = {Foerdern und Heben. 35 (1985), H. 5},
  isbn      = {0341-2636},
  pages     = {363 -- 366},
  year      = {1985},
  language  = {de}
}
@article{Knepper1984,
  author    = {Knepper, Ludger},
  title     = {Integrierte Hochregallager als materialflusstechnische Knotenpunkte moderner Produktions- und Umschlaganlagen},
  pages     = {93 -- 100},
  year      = {1984},
  language  = {de}
}
@article{Knepper1983,
  author    = {Knepper, Ludger},
  title     = {Verstaerkte materialflusstechnische Integration von Hochregallagern in Produktions- und Umschlaganlagen},
  pages     = {219 -- 224},
  year      = {1983},
  language  = {de}
}
@article{Knepper1981,
  author    = {Knepper, Ludger},
  title     = {Im neuen Lufthansa-Frachtterminal: vom Hochregallager direkt ins Flugzeug},
  series = {Foerdermittel Journal. Kennzifferzeitschrift fuer Materialfluss, Lager und Transport. 13 (1981), H. 7/8},
  journal   = {Foerdermittel Journal. Kennzifferzeitschrift fuer Materialfluss, Lager und Transport. 13 (1981), H. 7/8},
  isbn      = {0013-5674},
  pages     = {22 -- 24},
  year      = {1981},
  language  = {de}
}
@article{Knepper1984,
  author    = {Knepper, Ludger},
  title     = {Integrierte Hochregallager als materialflusstechnische Knotenpunkte moderner Produktions- und Umschlaganlagen},
  series = {Deutsche Hebe- und Foerdertechnik. 30 (1984), H. 12},
  journal   = {Deutsche Hebe- und Foerdertechnik. 30 (1984), H. 12},
  isbn      = {0012-0278},
  pages     = {88 -- 93},
  year      = {1984},
  language  = {de}
}
@article{Knepper1996,
  author    = {Knepper, Ludger},
  title     = {Simulation: Vom reinen Planungswerkzeug zum Betriebsf{\"u}hrungs-Instrument},
  series = {Foerdern und Heben. 46 (1996), H. 3},
  journal   = {Foerdern und Heben. 46 (1996), H. 3},
  isbn      = {0341-2636},
  pages     = {158 -- 160},
  year      = {1996},
  language  = {de}
}
@article{KosterScheidweilerTieves2016,
  author    = {Koster, Arie and Scheidweiler, Robert and Tieves, Martin},
  title     = {A flow based pruning scheme for enumerative equitable coloring algorithms},
  series = {A flow based pruning scheme for enumerative equitable coloring algorithms},
  journal   = {A flow based pruning scheme for enumerative equitable coloring algorithms},
  doi       = {10.48550/arXiv.1607.08754},
  pages     = {1 -- 30},
  year      = {2016},
  abstract  = {An equitable graph coloring is a proper vertex coloring of a graph G where the sizes of the color classes differ by at most one. The equitable chromatic number is the smallest number k such that G admits such equitable k-coloring. We focus on enumerative algorithms for the computation of the equitable coloring number and propose a general scheme to derive pruning rules for them: We show how the extendability of a partial coloring into an equitable coloring can be modeled via network flows. Thus, we obtain pruning rules which can be checked via flow algorithms. Computational experiments show that the search tree of enumerative algorithms can be significantly reduced in size by these rules and, in most instances, such naive approach even yields a faster algorithm. Moreover, the stability, i.e., the number of solved instances within a given time limit, is greatly improved. Since the execution of flow algorithms at each node of a search tree is time consuming, we derive arithmetic pruning rules (generalized Hall-conditions) from the network model. Adding these rules to an enumerative algorithm yields an even larger runtime improvement.},
  language  = {en}
}
@article{KunkelGebhardtMpofuetal.2018,
  author    = {Kunkel, Maximilian Hugo and Gebhardt, Andreas and Mpofu, Khumbaulani and Kallweit, Stephan},
  title     = {Statistical assessment of mechanical properties of selective laser melted specimens of stainless steel},
  series = {The International Journal of Advanced Manufacturing Technology},
  volume    = {98},
  journal   = {The International Journal of Advanced Manufacturing Technology},
  number    = {5-8},
  publisher = {Springer},
  address   = {London},
  issn      = {0268-3768},
  doi       = {10.1007/s00170-018-2040-8},
  pages     = {1409 -- 1431},
  year      = {2018},
  abstract  = {The rail business is challenged by long product life cycles and a broad spectrum of assembly groups and single parts. When spare part obsolescence occurs, quick solutions are needed. A reproduction of obsolete parts is often connected to long waiting times and minimum lot quantities that need to be purchased and stored. Spare part storage is therefore challenged by growing stocks, bound capital and issues of part ageing. A possible solution could be a virtual storage of spare parts which will be 3D printed through additive manufacturing technologies in case of sudden demand. As mechanical properties of additive manufactured parts are neither guaranteed by machine manufacturers nor by service providers, the utilization of this relatively young technology is impeded and research is required to address these issues. This paper presents an examination of mechanical properties of specimens manufactured from stainless steel through the selective laser melting (SLM) process. The specimens were produced in multiple batches. This paper interrogates the question if the test results follow a normal distribution pattern and if mechanical property predictions can be made. The results will be put opposite existing threshold values provided as the industrial standard. Furthermore, probability predictions will be made in order to examine the potential of the SLM process to maintain state-of-the-art mechanical property requirements.},
  language  = {en}
}
@article{KunkelGebhardtMpofuetal.2019,
  author    = {Kunkel, Maximilian Hugo and Gebhardt, Andreas and Mpofu, Khumbulani and Kallweit, Stephan},
  title     = {Quality assurance in metal powder bed fusion via deep-learning-based image classification},
  series = {Rapid Prototyping Journal},
  volume    = {26},
  journal   = {Rapid Prototyping Journal},
  number    = {2},
  issn      = {1355-2546},
  doi       = {10.1108/RPJ-03-2019-0066},
  pages     = {259 -- 266},
  year      = {2019},
  language  = {en}
}
@article{Kaemper2002,
  author    = {K{\"a}mper, Klaus-Peter},
  title     = {Die Mikroaktorik wird erwachsen},
  series = {INNO : innovative Technik - neue Anwendungen / Hrsg.: IVAM Fachverband f{\"u}r Mikrotechnik, Dortmund. Ausgabe 22 (2002)},
  journal   = {INNO : innovative Technik - neue Anwendungen / Hrsg.: IVAM Fachverband f{\"u}r Mikrotechnik, Dortmund. Ausgabe 22 (2002)},
  pages     = {4 -- 5},
  year      = {2002},
  language  = {de}
}
@article{Kaemper1996,
  author    = {K{\"a}mper, Klaus-Peter},
  title     = {Development of low-cost injection moulded micropumps. Entwicklung von kosteng{\"u}nstigen, mittels Spritzguß hergestellten Mikropumpen / D{\"o}pper, J. (u.a.)},
  series = {Actuator 96 : Conference Proceedings ; 5th International Conference on New Actuators ; 26- 28 June, Bremen, Germany / Ed.: Hubert Borgmann. Publ. by: AXON Technology Consult GmbH},
  journal   = {Actuator 96 : Conference Proceedings ; 5th International Conference on New Actuators ; 26- 28 June, Bremen, Germany / Ed.: Hubert Borgmann. Publ. by: AXON Technology Consult GmbH},
  address   = {Bremen},
  pages     = {37 -- 40},
  year      = {1996},
  language  = {en}
}
@article{Kaemper1994,
  author    = {K{\"a}mper, Klaus-Peter},
  title     = {Fertigung von Mikroaktoren mittels LIGA-Technik. Lehr, H.; Abel, S.; Chritz, G.; Ehrfeld, W.; K{\"a}mper, K.-P.; Michel, F.},
  series = {Proceedings Microengineering 94 : Messe Stuttgart 17. - 19. Mai 1994 / Messe Stuttgart International},
  journal   = {Proceedings Microengineering 94 : Messe Stuttgart 17. - 19. Mai 1994 / Messe Stuttgart International},
  address   = {Stuttgart},
  pages     = {getr. Z{\"a}hlung},
  year      = {1994},
  language  = {de}
}
@article{Kaemper1996,
  author    = {K{\"a}mper, Klaus-Peter},
  title     = {Mikromontage zur Fertigung hybrider Mikrosysteme. Nienhaus, M.; Berg, U.; Ehrfeld, W.; K{\"a}mper, K.-P.; Lehr, H.; Michel, F.},
  series = {41. Internationales Wissenschaftliches Kolloquium, Wandel im Maschinenbau durch Feinwerktechik und Mikrosystemtechnik, Bd. 1, Ilmenau, DE, 23.-26. Sep, 1996},
  journal   = {41. Internationales Wissenschaftliches Kolloquium, Wandel im Maschinenbau durch Feinwerktechik und Mikrosystemtechnik, Bd. 1, Ilmenau, DE, 23.-26. Sep, 1996},
  pages     = {121 -- 126},
  year      = {1996},
  language  = {de}
}
@article{Kaemper2003,
  author    = {K{\"a}mper, Klaus-Peter},
  title     = {Education and Training in MST. K{\"a}mper, K.-P.; Picard, A.; Brill, M.; Cassel, D.; Jentsch, A.; Merten, S.; Rollwa, M.},
  series = {Mst-News (2003)},
  journal   = {Mst-News (2003)},
  isbn      = {0948-3128},
  pages     = {35},
  year      = {2003},
  language  = {en}
}
@article{KaemperAbrahamHopster1992,
  author    = {K{\"a}mper, Klaus-Peter and Abraham, D. L. and Hopster, H.},
  title     = {Spin-polarized electron-energy-loss spectroscopy on epitaxial fcc Co layers on Cu(001)},
  series = {Physical Review B. 45 (1992), H. 24},
  journal   = {Physical Review B. 45 (1992), H. 24},
  isbn      = {1095-3795},
  pages     = {14335 -- 14346},
  year      = {1992},
  language  = {en}
}
@article{KaemperAbrahamEhrfeldetal.1998,
  author    = {K{\"a}mper, Klaus-Peter and Abraham, M. and Ehrfeld, W. and Hessel, V.},
  title     = {Microsystem technology: Between research and industrial application. Abraham, M.; Ehrfeld, W.; Hessel, V.; K{\"a}mper, K.-P.; Lacher, M.; Picard, A.},
  series = {Microelectronic Engineering. 41-42 (1998)},
  journal   = {Microelectronic Engineering. 41-42 (1998)},
  isbn      = {0167-9317},
  pages     = {47 -- 52},
  year      = {1998},
  language  = {en}
}
@article{KaemperBergBegemannetal.1998,
  author    = {K{\"a}mper, Klaus-Peter and Berg, U. and Begemann, M. and Hagemann, B. (u.a.)},
  title     = {Series production and testing of a micro motor. Serienfertigung und Pr{\"u}fung eines Mikromotors},
  series = {Actuator 98 : 6th International Conference on New Actuators ; 17 - 19 June, 1998, Bremen, Germany ; conference proceedings / ed.: Hubert Borgmann ...},
  journal   = {Actuator 98 : 6th International Conference on New Actuators ; 17 - 19 June, 1998, Bremen, Germany ; conference proceedings / ed.: Hubert Borgmann ...},
  publisher = {Messe Bremen},
  address   = {Bremen},
  isbn      = {3-933339-00-6},
  pages     = {552 -- 555},
  year      = {1998},
  language  = {en}
}
@article{KaemperBergLehretal.1996,
  author    = {K{\"a}mper, Klaus-Peter and Berg, U. and Lehr, H. and Ehrfeld, W.},
  title     = {Experimentelle Untersuchungen zur automatisierten Mikrolinsenmontage. Berg, U.; K{\"a}mper, K.-P.; Lehr, H.; Ehrfeld, W.},
  series = {Produktionstechnik f{\"u}r Mikrosysteme. IPA-Seminar, 5. und 6. November 1996, Stuttgart. Pro Mikro. Fraunhofer-Institut f{\"u}r Produktionstechnik und Automatisierung -IPA-, Stuttgart},
  journal   = {Produktionstechnik f{\"u}r Mikrosysteme. IPA-Seminar, 5. und 6. November 1996, Stuttgart. Pro Mikro. Fraunhofer-Institut f{\"u}r Produktionstechnik und Automatisierung -IPA-, Stuttgart},
  year      = {1996},
  language  = {de}
}
@article{KaemperBergWolfetal.1996,
  author    = {K{\"a}mper, Klaus-Peter and Berg, U. and Wolf, A. and Lehr, H.},
  title     = {Entwicklung von Linsenhaltern f{\"u}r ein SMIF-kompatibles Magazinsystem und deren Fertigung durch Mikrospritzguß. Berg, U.; K{\"a}mper, K.-P.; Wolf, A.; Lehr, H.; Ehrfeld, W.},
  series = {Produktionstechnik f{\"u}r Mikrosysteme. IPA-Seminar, 5. und 6. November 1996, Stuttgart. Pro Mikro. Fraunhofer-Institut f{\"u}r Produktionstechnik und Automatisierung -IPA-, Stuttgart},
  journal   = {Produktionstechnik f{\"u}r Mikrosysteme. IPA-Seminar, 5. und 6. November 1996, Stuttgart. Pro Mikro. Fraunhofer-Institut f{\"u}r Produktionstechnik und Automatisierung -IPA-, Stuttgart},
  year      = {1996},
  language  = {de}
}
@article{KaemperDoepperClemensetal.1997,
  author    = {K{\"a}mper, Klaus-Peter and D{\"o}pper, J. and Clemens, M. and Ehrfeld, W.},
  title     = {Micro gear pumps for dosing of viscous fluids. / D{\"o}pper, J. (u.a.)},
  series = {Journal of Micromechanics and Microengineering. 7 (1997), H. 3},
  journal   = {Journal of Micromechanics and Microengineering. 7 (1997), H. 3},
  isbn      = {0960-1317},
  pages     = {230 -- 232},
  year      = {1997},
  language  = {en}
}
@article{KaemperDoepperEhrfeldetal.1995,
  author    = {K{\"a}mper, Klaus-Peter and D{\"o}pper, J. and Ehrfeld, W. and Hagemann, B.},
  title     = {Simulation supported design of LIGA Microsystems. K{\"a}mper, K.-P.; D{\"o}pper, J.; Ehrfeld, W.; Hagemann, B.; Hill, S.D.J.; Lehr, H.},
  series = {Simulation and design of microsystems and microstructures : [... contains the papers presented at the First International Conference on the Simulation and Design of Microsystems and Microstructures, MicroSIM '95, which was held in Southampton, UK, in September 1995] / [organised by: Wessex Institute of Technology, UK]. Ed.: R. A. Adey},
  journal   = {Simulation and design of microsystems and microstructures : [... contains the papers presented at the First International Conference on the Simulation and Design of Microsystems and Microstructures, MicroSIM '95, which was held in Southampton, UK, in September 1995] / [organised by: Wessex Institute of Technology, UK]. Ed.: R. A. Adey},
  publisher = {Computational Mechanics Publ.},
  address   = {Southampton [u.a.]},
  isbn      = {1-85312-390-0},
  pages     = {3 -- 10},
  year      = {1995},
  language  = {en}
}
@article{KaemperDoepperEhrfeldetal.1995,
  author    = {K{\"a}mper, Klaus-Peter and D{\"o}pper, J. and Ehrfeld, W. and Hagemann, B.},
  title     = {An investigation of computer modelling for micro-injection moulding. Hill, S.D.J.; K{\"a}mper, K.-P.; Dasbach, U.; D{\"o}pper, J.; Ehrfeld, W.; Kaupert, M.},
  series = {Simulation and design of microsystems and microstructures : [... contains the papers presented at the First International Conference on the Simulation and Design of Microsystems and Microstructures, MicroSIM '95, which was held in Southampton, UK, in September 1995] / [organised by: Wessex Institute of Technology, UK]. Ed.: R. A. Adey},
  journal   = {Simulation and design of microsystems and microstructures : [... contains the papers presented at the First International Conference on the Simulation and Design of Microsystems and Microstructures, MicroSIM '95, which was held in Southampton, UK, in September 1995] / [organised by: Wessex Institute of Technology, UK]. Ed.: R. A. Adey},
  publisher = {Computational Mechanics Publ.},
  address   = {Southampton [u.a.]},
  isbn      = {1-85312-390-0},
  pages     = {275},
  year      = {1995},
  language  = {en}
}
@article{KaemperDoepperEhrfeldetal.1998,
  author    = {K{\"a}mper, Klaus-Peter and D{\"o}pper, J. and Ehrfeld, W. and Oberbeck, S.},
  title     = {A self-filling low-cost membrane micropump},
  series = {Proceedings : an investigation of micro structures, sensors, actuators, machines and systems / sponsored by the IEEE Robotics and Automation Society in cooperation with the ASME Dynamic Systems and Control Division},
  journal   = {Proceedings : an investigation of micro structures, sensors, actuators, machines and systems / sponsored by the IEEE Robotics and Automation Society in cooperation with the ASME Dynamic Systems and Control Division},
  publisher = {IEEE Service Center},
  address   = {Piscataway, NJ},
  isbn      = {078034412X},
  pages     = {432 -- 437},
  year      = {1998},
  language  = {en}
}
@article{KaemperEhrfeldDoepperetal.1997,
  author    = {K{\"a}mper, Klaus-Peter and Ehrfeld, W. and D{\"o}pper, J. and Hessel, V.},
  title     = {Microfluidic components for biological and chemical microreactors. K{\"a}mper, K.-P.; Ehrfeld, W.; D{\"o}pper, J.; Hessel, V.; Lehr, H.; L{\"o}we, H.; Richter, T.; Wolf, A.},
  series = {Proceedings : an investigation of micro structures, sensors, actuators, machines and robots ; Nagoya, Japan, January 26 - 30, 1997 / IEEE Robotics and Automation Society ...},
  journal   = {Proceedings : an investigation of micro structures, sensors, actuators, machines and robots ; Nagoya, Japan, January 26 - 30, 1997 / IEEE Robotics and Automation Society ...},
  publisher = {IEEE Service Center},
  address   = {Piscataway, NJ},
  isbn      = {0-7803-3744-1},
  pages     = {338 -- 343},
  year      = {1997},
  language  = {en}
}
@article{KaemperEhrfeldHagemannetal.1996,
  author    = {K{\"a}mper, Klaus-Peter and Ehrfeld, W. and Hagemann, B. and Lehr, H.},
  title     = {Electromagnetic permanent magnet micromotor with integrated micro gear box. K{\"a}mper, K.-P.; Ehrfeld, W.; Hagemann, B.; Lehr, H.; Michel, F.; Schirling, A.; Th{\"u}rigen, C.; Wittig, T.},
  series = {Actuator 96 : Conference Proceedings ; 5th International Conference on New Actuators ; 26- 28 June, Bremen, Germany / Ed.: Hubert Borgmann. Publ. by: AXON Technology Consult GmbH},
  journal   = {Actuator 96 : Conference Proceedings ; 5th International Conference on New Actuators ; 26- 28 June, Bremen, Germany / Ed.: Hubert Borgmann. Publ. by: AXON Technology Consult GmbH},
  address   = {Bremen},
  pages     = {429},
  year      = {1996},
  language  = {en}
}
@article{KaemperEhrfeldHesseletal.1997,
  author    = {K{\"a}mper, Klaus-Peter and Ehrfeld, W. and Hessel, V. and Lacher, M.},
  title     = {Market oriented development and production of microdevices. Ehrfeld, W.; Hessel, V.; K{\"a}mper, K.-P.; Lacher, M.; Picard, A.; Schmidt, M.; Schulz, C.},
  series = {Proceedings : 21th International Conference on Microelectronics : MIEL '97 ; Niš, Yugoslavia, 14-17 September 1997. Vol. 1},
  journal   = {Proceedings : 21th International Conference on Microelectronics : MIEL '97 ; Niš, Yugoslavia, 14-17 September 1997. Vol. 1},
  publisher = {IEEE Service Center},
  address   = {Piscataway, NJ},
  isbn      = {0-7803-3664-X},
  pages     = {71 -- 79},
  year      = {1997},
  language  = {en}
}
@article{KaemperEhrfeldLehretal.1993,
  author    = {K{\"a}mper, Klaus-Peter and Ehrfeld, W. and Lehr, H. and Michel, F.},
  title     = {LIGA-Technik zur Fertigung von Mikroaktoren. Ehrfeld. W.; K{\"a}mper, K.-P.; Lehr, H.; Michel, F.},
  series = {Mikroelektronik . 7 (1993), H. 5},
  journal   = {Mikroelektronik . 7 (1993), H. 5},
  isbn      = {0931-2714},
  pages     = {LXIX -- LXXI},
  year      = {1993},
  language  = {de}
}
@article{KaemperHagemannEhrfeldetal.1996,
  author    = {K{\"a}mper, Klaus-Peter and Hagemann, B. and Ehrfeld, W. and Lehr, H.},
  title     = {Einsatz der Finite-Elemente-Methode f{\"u}r die Entwicklung von Permanentmagnet-Mikromotoren. Hagemann, B.; Ehrfeld, W.; K{\"a}mper, K.-P.; Lehr, H.; Michel, F.; Th{\"u}rigen, C.},
  series = {Tagungsband : 3. Workshop Methoden- und Werkzeuge zum Entwurf von Mikrosystemen mit dem Schwerpunkt Methoden zum Entwurf, zur Integration und Parametrisierung von Komponenten f{\"u}r Applikationsspezifische Integrierte Mikrosysteme : 27. und 28. Juni 1996, VDE-Haus Frankfurt a. M.},
  journal   = {Tagungsband : 3. Workshop Methoden- und Werkzeuge zum Entwurf von Mikrosystemen mit dem Schwerpunkt Methoden zum Entwurf, zur Integration und Parametrisierung von Komponenten f{\"u}r Applikationsspezifische Integrierte Mikrosysteme : 27. und 28. Juni 1996, VDE-Haus Frankfurt a. M.},
  publisher = {C-LAB/Analoge Systemtechnik, 1996},
  address   = {Paderborn},
  pages     = {225 S. : graph. Darst.},
  year      = {1996},
  language  = {de}
}
@article{KaemperHagemannEhrfeldetal.1996,
  author    = {K{\"a}mper, Klaus-Peter and Hagemann, B. and Ehrfeld, W. and Lehr, H.},
  title     = {Berechnung und Optimierung von Permanentmagnet-Mikromotoren mit Hilfe der Finite-Elemente-Methode. Hagemann, B.; Ehrfeld, W.; K{\"a}mper, K.-P.; Lehr, H.; Michel, F.; Th{\"u}rigen, C.},
  series = {Simulation mit der Finite-Elemente-Methode in Feinwerk- und Mikrotechnik, M{\"u}nchen, 12. M{\"a}rz. 1996},
  journal   = {Simulation mit der Finite-Elemente-Methode in Feinwerk- und Mikrotechnik, M{\"u}nchen, 12. M{\"a}rz. 1996},
  pages     = {1 -- 13},
  year      = {1996},
  language  = {de}
}
@article{KaemperHagemannLehretal.1995,
  author    = {K{\"a}mper, Klaus-Peter and Hagemann, B. and Lehr, H. and Michel, F.},
  title     = {LIGA Example 2: Electromagnetic Micromotor. Hagemann, B.; K{\"a}mper, K.-P.; Lehr, H.; Michel, F.; Th{\"u}rigen, C.},
  series = {LIGA technique / Hans-Dieter Bauer (ed.). [Developed by UETP-MEMS, University Training Partnership for Micro-Electro-Mechanical Systems ...]. - 2.ed.},
  journal   = {LIGA technique / Hans-Dieter Bauer (ed.). [Developed by UETP-MEMS, University Training Partnership for Micro-Electro-Mechanical Systems ...]. - 2.ed.},
  publisher = {FSRM},
  address   = {Neuchatel},
  pages     = {100 -- 110},
  year      = {1995},
  language  = {en}
}
@article{KaemperKurzawaSchmittetal.1986,
  author    = {K{\"a}mper, Klaus-Peter and Kurzawa, R. and Schmitt, W. and G{\"u}ntherodt, G.},
  title     = {Spin-resolved photoemission study of in situ grown epitaxial Fe layers on W(110). Kurzawa, R.; K{\"a}mper, K.-P.; Schmitt, W.; G{\"u}ntherodt, G.},
  series = {Solid State Communications. 60 (1986), H. 10},
  journal   = {Solid State Communications. 60 (1986), H. 10},
  isbn      = {0038-1098},
  pages     = {777 -- 780},
  year      = {1986},
  language  = {en}
}
@article{KaemperLacherAbrahametal.1995,
  author    = {K{\"a}mper, Klaus-Peter and Lacher, M. and Abraham, M. and Ehrfeld, W.},
  title     = {Mikrosysteme f{\"u}r die Luft- und Raumfahrt. Lacher, M.; Abraham, M.; Ehrfeld, W.; Hagemann, B.; K{\"a}mper, K.-P.; Lehr, H.; Picard, A.; Zetterer, T.},
  series = {Deutscher Luft- und Raumfahrtkongreß 1995/1 (1995). Bonn, 26. - 29. September 1995 Motto: "Luft- und Raumfahrt - Schl{\"u}sseltechnologien f{\"u}r das 21. Jahrhundert"},
  journal   = {Deutscher Luft- und Raumfahrtkongreß 1995/1 (1995). Bonn, 26. - 29. September 1995 Motto: "Luft- und Raumfahrt - Schl{\"u}sseltechnologien f{\"u}r das 21. Jahrhundert"},
  publisher = {Deutsche Gesellschaft f{\"u}r Luft- und Raumfahrt},
  address   = {Lilienthal-Oberth},
  pages     = {415 -- 423},
  year      = {1995},
  language  = {de}
}
@article{KaemperLehrAbeletal.1996,
  author    = {K{\"a}mper, Klaus-Peter and Lehr, H. and Abel, S. and D{\"o}pper, J.},
  title     = {Microactuators as driving units for microrobotic systems. Herstellung von Mikroaktoren mit dem LIGA-Verfahren f{\"u}r Mikroroboter / Lehr, H.; Abel, S.; D{\"o}pper, J.; Ehrfeld, W.; Hagemann, B.; K{\"a}mper, K.-P.; Michel, F.; Schulu, c.; Th{\"u}rigen, C.},
  series = {Proceedings of the SPIE - The International Society for Optical Engineering},
  journal   = {Proceedings of the SPIE - The International Society for Optical Engineering},
  isbn      = {0277-786X},
  pages     = {202 -- 210},
  year      = {1996},
  language  = {en}
}
@article{KaemperLehrAbeletal.1995,
  author    = {K{\"a}mper, Klaus-Peter and Lehr, H. and Abel, S. and Ehrfeld, W.},
  title     = {Assembly of Electromagnetic Milliactuators with LIGA Components. Lehr, H.; Abel, S.; Ehrfeld, W.; Hagemann, B.; K{\"a}mper, K.-P.; Michel, F.; Th{\"u}rigen, C.},
  series = {Proceedings 2nd Japan-France Congress on Mechatronics, Takamatsu (Kagawa, Japan) 1.-3. November 1994, 31 (1994)},
  journal   = {Proceedings 2nd Japan-France Congress on Mechatronics, Takamatsu (Kagawa, Japan) 1.-3. November 1994, 31 (1994)},
  publisher = {Fuji Technology Press},
  pages     = {31 -- 31},
  year      = {1995},
  language  = {en}
}
@article{KaemperLehrAbeletal.1996,
  author    = {K{\"a}mper, Klaus-Peter and Lehr, H. and Abel, S. and Ehrfeld, W.},
  title     = {Entwicklung von elektromagnetischen Mikroaktoren. Lehr, H.; Abel, S.; Ehrfeld, W.; Hagemann, B.; K{\"a}mper, K.-P.; Michel, F.; Th{\"u}rigen, C.},
  series = {41. Internationales Wissenschaftliches Kolloquium, Wandel im Maschinenbau durch Feinwerktechik und Mikrosystemtechnik, Bd. 1, Ilmenau, DE, 23.-26. Sep, 1996},
  journal   = {41. Internationales Wissenschaftliches Kolloquium, Wandel im Maschinenbau durch Feinwerktechik und Mikrosystemtechnik, Bd. 1, Ilmenau, DE, 23.-26. Sep, 1996},
  pages     = {158 -- 163},
  year      = {1996},
  language  = {de}
}
@article{KaemperLehrEhrfeldetal.1997,
  author    = {K{\"a}mper, Klaus-Peter and Lehr, H. and Ehrfeld, W. and Hagemann, B.},
  title     = {Development of micro and millimotors. Lehr, H.; Ehrfeld, W.; Hagemann, B.; K{\"a}mper, K.-P.; Michel, F.; Schulz, C.; Th{\"u}rigen C.},
  series = {Minimally Invasive Therapy and Allied Technologies. 6 (1997)},
  journal   = {Minimally Invasive Therapy and Allied Technologies. 6 (1997)},
  isbn      = {1364-5706},
  year      = {1997},
  language  = {en}
}
@article{KaemperLehrEhrfeldetal.1996,
  author    = {K{\"a}mper, Klaus-Peter and Lehr, H. and Ehrfeld, W. and Hagemann, B.},
  title     = {Entwicklung von Mikroantrieben am Institut f{\"u}r Mikrotechnik Mainz. Lehr, H.; Ehrfeld, W.; Hagemann, B.; K{\"a}mper, K.-P.; Michel, F.; Th{\"u}rigen, C.},
  series = {Innovative Kleinantriebe : Tagung Mainz, 9. und 10. Mai 1996 / VDE-VDI-Gesellschaft Mikroelektronik, Mikro- und Feinwerktechnik, GMM},
  journal   = {Innovative Kleinantriebe : Tagung Mainz, 9. und 10. Mai 1996 / VDE-VDI-Gesellschaft Mikroelektronik, Mikro- und Feinwerktechnik, GMM},
  publisher = {VDI-Verl.},
  address   = {D{\"u}sseldorf},
  isbn      = {3-18-091269-3},
  pages     = {77},
  year      = {1996},
  language  = {de}
}
@article{KaemperLehrEhrfeldetal.1994,
  author    = {K{\"a}mper, Klaus-Peter and Lehr, H. and Ehrfeld, W. and Michel, F.},
  title     = {LIGA Components for the Construction of Milliactuators. Lehr, H.; Ehrfeld, W.; K{\"a}mper, K.-P.; Michel, F.; Schmidt, M.},
  series = {1994 IEEE Symposium on Emerging Technologies \& Factory Automation : novel disciplines for the next century ; proceedings, November 6 - 10, 1994, Tokyo, Japan / ETFA '94. Hiroyuki Fujita [chairman] ... Sponsored by: Institute of Industrial Science, SEIKEN},
  journal   = {1994 IEEE Symposium on Emerging Technologies \& Factory Automation : novel disciplines for the next century ; proceedings, November 6 - 10, 1994, Tokyo, Japan / ETFA '94. Hiroyuki Fujita [chairman] ... Sponsored by: Institute of Industrial Science, SEIKEN},
  address   = {Piscataway, N.J.},
  isbn      = {0780321146},
  pages     = {43 -- 47},
  year      = {1994},
  language  = {en}
}
@article{KaemperMertenBrilletal.2003,
  author    = {K{\"a}mper, Klaus-Peter and Merten, Sabine and Brill, Manfred and Cassel, Detlev (u.a.)},
  title     = {Virtuelle Sensor-Fertigung: Hightech mit LabVIEW},
  series = {Virtuelle Instrumente in der Praxis : Messtechnik, Automatisierung ; Begleitband zum Kongress VIP 2003 / Rahman Jamal ; Hans Jaschinski (Hrsg.)},
  journal   = {Virtuelle Instrumente in der Praxis : Messtechnik, Automatisierung ; Begleitband zum Kongress VIP 2003 / Rahman Jamal ; Hans Jaschinski (Hrsg.)},
  publisher = {H{\"u}thig},
  address   = {Heidelberg},
  isbn      = {3-7785-2908-0},
  pages     = {465 -- 470},
  year      = {2003},
  language  = {de}
}
@article{KaemperMertenBrilletal.2005,
  author    = {K{\"a}mper, Klaus-Peter and Merten, Sabine and Brill, Manfred and Picard, Antoni},
  title     = {Praxisorientierte Ingenieurausbildung durch multimedial unterst{\"u}tzte Laborkurse. Merten, Sabine ; K{\"a}mper, Klaus-Peter ; Brill, Manfred ; Picard, Antoni},
  series = {Online-P{\"a}dagogik. Bd. 3 Referenzmodelle und Praxisbeispiele / hrsg. von Burkhard Lehmann ...},
  journal   = {Online-P{\"a}dagogik. Bd. 3 Referenzmodelle und Praxisbeispiele / hrsg. von Burkhard Lehmann ...},
  publisher = {Schneider-Verl. Hohengehren},
  address   = {Baltmannsweiler},
  isbn      = {3-89676-987-1},
  pages     = {278 S. : Ill., graph. Darst.},
  year      = {2005},
  language  = {de}
}
@article{KaemperMertenBrilletal.2003,
  author    = {K{\"a}mper, Klaus-Peter and Merten, Sabine and Brill, Manfred and Picard, Antoni (u.a.)},
  title     = {Vom virtuellen Wafer zum realen Drucksensor: Information - Communication - Knowledge engineering education today},
  series = {Schriftenreihe Ingenieurp{\"a}dagogik : Hochschule f{\"u}r Bildungswissenschaften in Klagenfurt ; Band 49},
  journal   = {Schriftenreihe Ingenieurp{\"a}dagogik : Hochschule f{\"u}r Bildungswissenschaften in Klagenfurt ; Band 49},
  pages     = {318 -- 321},
  year      = {2003},
  language  = {de}
}
@article{KaemperMertenBrilletal.2003,
  author    = {K{\"a}mper, Klaus-Peter and Merten, Sabine and Brill, Manfred and Picard, Antoni (u.a.)},
  title     = {Vom virtuellen Wafer zum realen Drucksensor: Bildungsnetzwerke verbessern die Ausbildung in Hochtechnologien.},
  series = {Kooperation und Arbeit in vernetzten Welten : Tagungsband der GFA-Herbstkonferenz 2003, Aachen, 29. September - 01. Oktober 2003 / Holger Luczak (Hrsg.)},
  journal   = {Kooperation und Arbeit in vernetzten Welten : Tagungsband der GFA-Herbstkonferenz 2003, Aachen, 29. September - 01. Oktober 2003 / Holger Luczak (Hrsg.)},
  publisher = {Ergonomia-Verl.},
  address   = {Stuttgart},
  isbn      = {3-935089-71-6},
  pages     = {238 -- 241},
  year      = {2003},
  language  = {de}
}
@article{KaemperPappasHopster1990,
  author    = {K{\"a}mper, Klaus-Peter and Pappas, D. P. and Hopster, H.},
  title     = {Reversible transition between perpendicular and in-plane magnetization in ultrathin films. Pappas, D. P.; K{\"a}mper, K.-P.; Hopster, H.},
  series = {Physical Review Letters. 64 (1990), H. 26},
  journal   = {Physical Review Letters. 64 (1990), H. 26},
  isbn      = {1079-7114},
  pages     = {3179 -- 3182},
  year      = {1990},
  language  = {en}
}
@article{KaemperPappasMilleretal.1991,
  author    = {K{\"a}mper, Klaus-Peter and Pappas, D. P. and Miller, B. P. and Hopster, H.},
  title     = {Spin-dependent electron attenuation by transmission through thin ferromagnetic films . Pappas, D. P.; K{\"a}mper,K.-P.; Miller, B. P.; Hopster, H.; Fowler, D. E.; Brundle, C. R.; Luntz, A. C.; Shen, Z.-X.},
  series = {Physical Review Letters. 66 (1991), H. 4},
  journal   = {Physical Review Letters. 66 (1991), H. 4},
  isbn      = {1079-7114},
  pages     = {504 -- 507},
  year      = {1991},
  language  = {en}
}
@article{KaemperPappasMilleretal.1991,
  author    = {K{\"a}mper, Klaus-Peter and Pappas, D. P. and Miller, B. P. and Hopster, H.},
  title     = {Magnetism of ultrathin films of Fe on Cu(100). Pappas, D. P; K{\"a}mper, K.-P.; Miller, B. P.; Hopster, H.; Fowler, D. E.; Luntz, A. C.; Brundle, C.R.; Shen, Z.-X.},
  series = {Journal of Applied Physics. 69 (1991), H. 8},
  journal   = {Journal of Applied Physics. 69 (1991), H. 8},
  isbn      = {1089-7550},
  pages     = {5209 -- 521},
  year      = {1991},
  language  = {en}
}
@article{KaemperPicardSchuetze2005,
  author    = {K{\"a}mper, Klaus-Peter and Picard, A. and Sch{\"u}tze, A.},
  title     = {Die Ausbildungsfoundry pro-mst und das virtuelle Technologielabor: Ein Konzept f{\"u}r eine exzellente praktische MST-Ausbildung in einem modernen Reinraum zu niedrigen Gesamtkosten. Picard, A.; K{\"a}mper, K.-P.; Sch{\"u}tze, A.},
  series = {Mikrosystemtechnik-Kongress 2005 : 10. bis 12. Oktober 2005 in Freiburg ; gemeinsame Veranstaltung von: Bundesministerium f{\"u}r Bildung und Forschung (BMBF) ... / organisiert von: GMM VDE/VDI-Gesellschaft Mikroelektronik, Mikro- und Feinwerktechnik ... Chairman: Roland Zengerle},
  journal   = {Mikrosystemtechnik-Kongress 2005 : 10. bis 12. Oktober 2005 in Freiburg ; gemeinsame Veranstaltung von: Bundesministerium f{\"u}r Bildung und Forschung (BMBF) ... / organisiert von: GMM VDE/VDI-Gesellschaft Mikroelektronik, Mikro- und Feinwerktechnik ... Chairman: Roland Zengerle},
  publisher = {VDE-Verl.},
  address   = {Berlin},
  isbn      = {3-8007-2926-1},
  pages     = {127},
  year      = {2005},
  language  = {de}
}
@article{KaemperPicardSchuetzeetal.2006,
  author    = {K{\"a}mper, Klaus-Peter and Picard, A. and Sch{\"u}tze, A. and Wallach, D.},
  title     = {Adopting the Foundry Concept of Semiconductor Fabrication on Educational Schemes and the Virtual Technology Lab (VTL). Picard, A.; K{\"a}mper, K.-P.; Sch{\"u}tze, A.; Wallach, D.; Walter, T.},
  series = {Mst-News (2006)},
  journal   = {Mst-News (2006)},
  isbn      = {0948-3128},
  pages     = {15, 16 -- u. 35},
  year      = {2006},
  language  = {en}
}
@article{KaemperPicardBrilletal.2003,
  author    = {K{\"a}mper, Klaus-Peter and Picard, Antoni and Brill, Manfred and Cassel, Detlef (u.a.)},
  title     = {The Virtual Cleanroom - a new tool in teaching MST process technologies},
  series = {mst news International newsletter on micro - nano Integration (2003)},
  journal   = {mst news International newsletter on micro - nano Integration (2003)},
  isbn      = {0948-3128},
  pages     = {35 -- 36},
  year      = {2003},
  language  = {en}
}
@article{KaemperPicardBrilletal.2002,
  author    = {K{\"a}mper, Klaus-Peter and Picard, Antoni and Brill, Manfred and Cassel, Detlef (u.a.)},
  title     = {Neue Medien f{\"u}r die praktische MST Ausbildung},
  series = {Rundschau, FH Kaiserslautern,. Ausgabe Ju (2002)},
  journal   = {Rundschau, FH Kaiserslautern,. Ausgabe Ju (2002)},
  pages     = {14 -- 15},
  year      = {2002},
  language  = {de}
}
@article{KaemperPicardSchuetze2007,
  author    = {K{\"a}mper, Klaus-Peter and Picard, Antoni and Sch{\"u}tze, Andreas},
  title     = {K{\"o}nnen Studierende einen piezoresistiven Drucksensor in einer Woche selbst{\"a}ndig fertigen?},
  series = {Interesse wecken, Motivation steigern, Praxisorientiert ausbilden : Nachwuchsf{\"o}rderung und innovative Ausbildung in Sensorik und Mikrosystemtechnik : [anl{\"a}ßlich der Sondersession auf der Sensor+Test 2007]},
  journal   = {Interesse wecken, Motivation steigern, Praxisorientiert ausbilden : Nachwuchsf{\"o}rderung und innovative Ausbildung in Sensorik und Mikrosystemtechnik : [anl{\"a}ßlich der Sondersession auf der Sensor+Test 2007]},
  publisher = {AWNET},
  address   = {Berlin},
  isbn      = {978-3-89750-148-5},
  pages     = {26 -- 35},
  year      = {2007},
  language  = {de}
}
@article{KaemperSchmittGuentherodt1987,
  author    = {K{\"a}mper, Klaus-Peter and Schmitt, W. and G{\"u}ntherodt, G.},
  title     = {The influence of adsorbates on the spin-resolved photoemission of Ni(110). Schmitt, W.; K{\"a}mper, K.-P.; G{\"u}ntherodt, G.},
  series = {Surface Science. 189/190 (1987)},
  journal   = {Surface Science. 189/190 (1987)},
  isbn      = {0039-6028},
  pages     = {741 -- 507},
  year      = {1987},
  language  = {en}
}
@article{KaemperSchmittGuentherodt1987,
  author    = {K{\"a}mper, Klaus-Peter and Schmitt, W. and G{\"u}ntherodt, G.},
  title     = {Effect of adsorbates on the spin-polarized photoemission of itinerant ferromagnets. Schmitt, W.; K{\"a}mper, K.-P.; G{\"u}ntherodt, G.},
  series = {Physical Review B. 36 (1987), H. 7},
  journal   = {Physical Review B. 36 (1987), H. 7},
  isbn      = {1095-3795},
  pages     = {3763 -- 3768},
  year      = {1987},
  language  = {en}
}
@article{KaemperSchmittGuentherodt1988,
  author    = {K{\"a}mper, Klaus-Peter and Schmitt, W. and G{\"u}ntherodt, G.},
  title     = {Thickness dependence of the electronic structure of ultrathin, epitaxial Ni(111)/W(110) layers.},
  series = {Physical Review B. 38 (1988), H. 14},
  journal   = {Physical Review B. 38 (1988), H. 14},
  isbn      = {1095-3795},
  pages     = {9451 -- 9456},
  year      = {1988},
  language  = {en}
}
@article{KaemperSchmittGuentherodt1990,
  author    = {K{\"a}mper, Klaus-Peter and Schmitt, W. and G{\"u}ntherodt, G.},
  title     = {Temperature and wave-vector dependence of the spin-split band structure of Ni(111) along the \&\#915;-L line},
  series = {Physical Review B. 42 (1990), H. 16},
  journal   = {Physical Review B. 42 (1990), H. 16},
  isbn      = {1095-3795},
  pages     = {10696 -- 10705},
  year      = {1990},
  language  = {en}
}
@article{KaemperSchmittGuentherodt1988,
  author    = {K{\"a}mper, Klaus-Peter and Schmitt, W. and G{\"u}ntherodt, G.},
  title     = {Temperature dependence of the exchange splitting of Ni along the \&\#61511;-L line},
  series = {Journal de physique. 49 (1988), H. 12. Supplement, Colloque C8},
  journal   = {Journal de physique. 49 (1988), H. 12. Supplement, Colloque C8},
  pages     = {39 -- 40},
  year      = {1988},
  language  = {en}
}
@article{KaemperSchmittGuentherodtetal.1987,
  author    = {K{\"a}mper, Klaus-Peter and Schmitt, W. and G{\"u}ntherodt, G. and Gambino, R. J.},
  title     = {CrO2—A New Half-Metallic Ferromagnet? K{\"a}mper, K.-P.; Schmitt, W.; G{\"u}ntherodt, G.; Gambino, R. J., Ruf, R.},
  series = {Physical Review Letters. 59 (1987), H. 24},
  journal   = {Physical Review Letters. 59 (1987), H. 24},
  isbn      = {1079-7114},
  pages     = {2788 -- 2791},
  year      = {1987},
  language  = {en}
}
@article{KaemperSchmittWesneretal.1989,
  author    = {K{\"a}mper, Klaus-Peter and Schmitt, W. and Wesner, D. A. and G{\"u}ntherodt, G.},
  title     = {Thickness dependence of the spin- and angle-resolved photoemission of ultrathin, epitaxial Ni(111)/W(110) layers},
  series = {Applied Physics A: Materials Science and Processing. 49 (1989), H. 6},
  journal   = {Applied Physics A: Materials Science and Processing. 49 (1989), H. 6},
  isbn      = {1432-0630},
  pages     = {573 -- 578},
  year      = {1989},
  language  = {en}
}
@article{KaemperSchulzArnoldetal.1995,
  author    = {K{\"a}mper, Klaus-Peter and Schulz, C. and Arnold, J. and Detter, H.},
  title     = {Anwendungen der LIGA-Technik f{\"u}r medizinische Diagnose- und Therapiesysteme. Schulz, C.; Arnold, J.; Detter, H.; D{\"o}pper, J.; Ehrfeld, W., Erbel, R.; K{\"a}mper, K.-P.; Koch, L.; Lehr, H.; Roth, T.},
  series = {Elektrotechnik und Informationstechnik. 112 (1995), H. 9},
  journal   = {Elektrotechnik und Informationstechnik. 112 (1995), H. 9},
  isbn      = {0932-383X},
  pages     = {493},
  year      = {1995},
  language  = {de}
}
@article{KaemperSchulzEhrfeldetal.1994,
  author    = {K{\"a}mper, Klaus-Peter and Schulz, C. and Ehrfeld, W. and Erbel, R.},
  title     = {LIGA Fabricated Microsystems for Medical and Related Applications. Schulz, C.; Ehrfeld, W.; Erbel, R.; K{\"a}mper, K.-P.; Koch, L.; Lehr, H.; Roth, T.},
  series = {3-Day Course on Microengineering in Medicine and Biology and its Applications to Minimally Invasive Techniques for Therapy and Medical Diagnosis : EURO-BME 94; October 5, 6, and 7, 1994, Swiss Federal Institute of Technology, EPFL, Lausanne, Switzerland / [the 1994 EURO-BME Microengineering in Medicine and Biology Training Course. Staff: Christian D. Depeursinge ...]},
  journal   = {3-Day Course on Microengineering in Medicine and Biology and its Applications to Minimally Invasive Techniques for Therapy and Medical Diagnosis : EURO-BME 94; October 5, 6, and 7, 1994, Swiss Federal Institute of Technology, EPFL, Lausanne, Switzerland / [the 1994 EURO-BME Microengineering in Medicine and Biology Training Course. Staff: Christian D. Depeursinge ...]},
  publisher = {REPRO EPFL},
  address   = {Lausanne},
  pages     = {Getr. Z{\"a}hlung : Ill., graph. Darst.},
  year      = {1994},
  language  = {en}
}
@article{KaemperThuerigenEhrfeldetal.1996,
  author    = {K{\"a}mper, Klaus-Peter and Th{\"u}rigen, C. and Ehrfeld, W. and Hagemann, B.},
  title     = {Gesichtspunkte beim Miniaturisieren von Umlaufr{\"a}dergetrieben. Th{\"u}rigen, C.; Ehrfeld, W. ; Hagemann, B.; K{\"a}mper, K.-P.; Lehr, H.; Michel, F.},
  series = {Innovative Kleinantriebe : Tagung Mainz, 9. und 10. Mai 1996 / VDE-VDI-Gesellschaft Mikroelektronik, Mikro- und Feinwerktechnik, GMM},
  journal   = {Innovative Kleinantriebe : Tagung Mainz, 9. und 10. Mai 1996 / VDE-VDI-Gesellschaft Mikroelektronik, Mikro- und Feinwerktechnik, GMM},
  publisher = {VDI-Verl.},
  address   = {D{\"u}sseldorf},
  isbn      = {3-18-091269-3},
  pages     = {235},
  year      = {1996},
  language  = {de}
}
@article{LeidingerNoistenWollert2012,
  author    = {Leidinger, Rafael and Noisten, Thomas and Wollert, J{\"o}rg},
  title     = {Realtime automation networks in moVing industrial environments},
  series = {Journal of systemics, cybernetics and informatics},
  volume    = {Vol. 10},
  journal   = {Journal of systemics, cybernetics and informatics},
  number    = {Iss. 2},
  publisher = {IIIC},
  address   = {Orlando},
  issn      = {1690-4532},
  pages     = {52 -- 56},
  year      = {2012},
  abstract  = {The radio-based wireless data communication has made the realization of new technical solutions possible in many fields of the automation technology (AT). For about ten years, a constant disproportionate growth of wireless technologies can be observed in the automation technology. However, it shows that especially for the AT, conventional technologies of office automation are unsuitable and/or not manageable. The employment of mobile services in the industrial automation technology has the potential of significant cost and time savings. This leads to an increased productivity in various fields of the AT, for example in the factory and process automation or in production logistics. In this paper technologies and solutions for an automation-suited supply of mobile wireless services will be introduced under the criteria of real time suitability, IT-security and service orientation. Emphasis will be put on the investigation and development of wireless convergence layers for different radio technologies, on the central provision of support services for an easy-to-use, central, backup enabled management of combined wired / wireless networks and on the study on integrability in a Profinet real-time Ethernet network.},
  language  = {en}
}
@article{LuftLuftArntz2023,
  author    = {Luft, Angela and Luft, Nils and Arntz, Kristian},
  title     = {A basic description logic for service-oriented architecture in factory planning and operational control in the age of industry 4.0},
  series = {Applied Sciences},
  volume    = {2023},
  journal   = {Applied Sciences},
  number    = {13},
  publisher = {MDPI},
  address   = {Basel},
  doi       = {10.3390/app13137610},
  pages     = {Artikel 7610},
  year      = {2023},
  abstract  = {Manufacturing companies across multiple industries face an increasingly dynamic and unpredictable environment. This development can be seen on both the market and supply side. To respond to these challenges, manufacturing companies must implement smart manufacturing systems and become more flexible and agile. The flexibility in operational planning regarding the scheduling and sequencing of customer orders needs to be increased and new structures must be implemented in manufacturing systems' fundamental design as they constitute much of the operational flexibility available. To this end, smart and more flexible solutions for production planning and control (PPC) are developed. However, scheduling or sequencing is often only considered isolated in a predefined stable environment. Moreover, their orientation on the fundamental logic of the existing IT solutions and their applicability in a dynamic environment is limited. This paper presents a conceptual model for a task-based description logic that can be applied to factory planning, technology planning, and operational control. By using service-oriented architectures, the goal is to generate smart manufacturing systems. The logic is designed to allow for easy and automated maintenance. It is compatible with the existing resource and process allocation logic across operational and strategic factory and production planning.},
  language  = {en}
}
@article{MautnerForsterKornhuberetal.2008,
  author    = {Mautner, Karin and Forster, Ralf and Kornhuber, Ralf and Sander, Oliver},
  title     = {Fast and Reliable Pricing of American Options with Local Volatility / Forster, Ralf ; Kornhuber, Ralf ; Mautner, Karin ; Sander, Oliver},
  series = {Domain Decomposition Methods in Science and Engineering XVII},
  journal   = {Domain Decomposition Methods in Science and Engineering XVII},
  isbn      = {978-3-540-75198-4},
  pages     = {383 -- 390},
  year      = {2008},
  language  = {en}
}
@article{MichauxMatternKallweit2018,
  author    = {Michaux, F. and Mattern, P. and Kallweit, Stephan},
  title     = {RoboPIV: how robotics enable PIV on a large industrial scale},
  series = {Measurement Science and Technology},
  volume    = {29},
  journal   = {Measurement Science and Technology},
  number    = {7},
  publisher = {IOP},
  address   = {Bristol},
  issn      = {1361-6501},
  doi       = {10.1088/1361-6501/aab5c1},
  pages     = {074009},
  year      = {2018},
  abstract  = {This work demonstrates how the interaction between particle image velocimetry (PIV) and robotics can massively increase measurement efficiency. The interdisciplinary approach is shown using the complex example of an automated, large scale, industrial environment: a typical automotive wind tunnel application. Both the high degree of flexibility in choosing the measurement region and the complete automation of stereo PIV measurements are presented. The setup consists of a combination of three robots, individually used as a 6D traversing unit for the laser illumination system as well as for each of the two cameras. Synchronised movements in the same reference frame are realised through a master-slave setup with a single interface to the user. By integrating the interface into the standard wind tunnel management system, a single measurement plane or a predefined sequence of several planes can be requested through a single trigger event, providing the resulting vector fields within minutes. In this paper, a brief overview on the demands of large scale industrial PIV and the existing solutions is given. Afterwards, the concept of RoboPIV is introduced as a new approach. In a first step, the usability of a selection of commercially available robot arms is analysed. The challenges of pose uncertainty and importance of absolute accuracy are demonstrated through comparative measurements, explaining the individual pros and cons of the analysed systems. Subsequently, the advantage of integrating RoboPIV directly into the existing wind tunnel management system is shown on basis of a typical measurement sequence. In a final step, a practical measurement procedure, including post-processing, is given by using real data and results. Ultimately, the benefits of high automation are demonstrated, leading to a drastic reduction in necessary measurement time compared to non-automated systems, thus massively increasing the efficiency of PIV measurements.},
  language  = {en}
}
@article{MukherjeePrahlBlecketal.2010,
  author    = {Mukherjee, Krishnendu and Prahl, Ulrich and Bleck, Wolfgang and Reisgen, Uwe and Schleser, Markus and Abdurakhmanov, Aydemir},
  title     = {Characterization and modelling techniques for gas metal arc welding of DP 600 sheet steels},
  series = {Materialwissenschaft und Werkstofftechnik},
  volume    = {41},
  journal   = {Materialwissenschaft und Werkstofftechnik},
  number    = {11},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1521-4052},
  doi       = {10.1002/mawe.201000692},
  pages     = {972 -- 983},
  year      = {2010},
  abstract  = {The objectives of the present work are to characterize the Gas Metal Arc Welding process of DP 600 sheet steel and to summarize the modelling techniques. The time-temperature evolution during the welding cycle was measured experimentally and modelled with the softwaretool SimWeld. To model the phase transformations during the welding cycle dilatometer tests were done to quantify the parameters for phase field modelling by MICRESS®. The important input parameters are interface mobility, nucleation density, etc. A contribution was made to include austenite to bainite transformation in MICRESS®. This is useful to predict the microstructure in the fast cooling segments. The phase transformation model is capable to predict the microstructure along the heating and cooling cycles of welding. Tensile tests have shown the evidence of failure at the heat affected zone, which has the ferrite-tempered martensite microstructure.},
  language  = {en}
}
@article{MukherjeeRamazaniYangetal.2011,
  author    = {Mukherjee, Krishnendu and Ramazani, Ali and Yang, Li and Prahl, Ulrich and Bleck, Wolfgang and Reisgen, Uwe and Schleser, Markus and Abdurakhmanov, Aydemir},
  title     = {Characterization of gas metal arc welded hot rolled DP600 steel},
  series = {Steel research international},
  volume    = {Vol. 82},
  journal   = {Steel research international},
  number    = {Iss. 12},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1869-344X (E-Book); 1611-3683 (Print)},
  pages     = {1408 -- 1416},
  year      = {2011},
  language  = {en}
}
@article{PancContiuBocanetetal.2019,
  author    = {Panc, Nicolae and Contiu, Glad and Bocanet, Vlad and Thurn, Laura and Sabau, Emilia},
  title     = {The influence of cutting technology on surface wear hardness},
  series = {Academic Journal of Manufacturing Engineering},
  volume    = {17},
  journal   = {Academic Journal of Manufacturing Engineering},
  number    = {3},
  issn      = {1583-7904},
  pages     = {205 -- 210},
  year      = {2019},
  language  = {en}
}
@article{PeekenAbdelLatifBenner1985,
  author    = {Peeken, Heinz and Abdel-Latif, Lotfie Ahmed and Benner, Joachim},
  title     = {Einfluss der {\"O}lversch{\"a}umung auf Axiallager mit Kreis- und Michell-Segmenten},
  series = {VDI-Z : Zeitschrift f{\"u}r integrierte Produktion},
  volume    = {127},
  journal   = {VDI-Z : Zeitschrift f{\"u}r integrierte Produktion},
  number    = {5},
  publisher = {Springer-VDI-Verl},
  address   = {D{\"u}sseldorf},
  issn      = {0042-1766},
  pages     = {145 -- 151},
  year      = {1985},
  language  = {de}
}
@article{PeekenBennerPlatt1989,
  author    = {Peeken, Heinz and Benner, Joachim and Platt, Werner},
  title     = {Ausfallkriterien elastomerbest{\"u}ckter Wellenkupplungen},
  series = {Antriebstechnik : Konstruktion, Entwicklung und Anwendung von Antrieben und Steuerungen ; Organ der Forschungsvereinigung Antriebstechnik e.V.},
  volume    = {28},
  journal   = {Antriebstechnik : Konstruktion, Entwicklung und Anwendung von Antrieben und Steuerungen ; Organ der Forschungsvereinigung Antriebstechnik e.V.},
  number    = {11},
  publisher = {Vereinigte Fachverl.},
  address   = {Mainz},
  issn      = {0341-2652},
  pages     = {85 -- 88},
  year      = {1989},
  language  = {de}
}
@article{Pfaff2015,
  author    = {Pfaff, Raphael},
  title     = {Praxisnahe Ausbildung im Fach Schienenfahrzeugtechnik},
  series = {Deine Bahn},
  journal   = {Deine Bahn},
  number    = {8},
  publisher = {Eisenbahn-Fachverlag},
  address   = {Mainz},
  issn      = {0172-4479},
  pages     = {52 -- 55},
  year      = {2015},
  language  = {de}
}
@article{Pfaff2017,
  author    = {Pfaff, Raphael},
  title     = {Einsatz von offenen Onlinekursen in der Eisenbahnlehre},
  series = {Deine Bahn},
  journal   = {Deine Bahn},
  number    = {1},
  publisher = {Bahn-Fachverlag},
  address   = {Berlin},
  issn      = {0948-7263},
  pages     = {12 -- 16},
  year      = {2017},
  abstract  = {Eigene positive Erfahrungen mit Onlinekursen sowie die geringen Studierendenzahlen in der Pr{\"a}senzlehre gaben den Anstoß zu einem Experiment mit einem offenen Onlinekurs auf der Plattform Udemy. Die Erfahrungen sowohl bei der Erstellung und als auch im Lehrbetrieb waren positiv und f{\"u}hrten zu einer neuen Besch{\"a}ftigung mit Inhalten und Lernenden, getrieben durch die Anforderungen der Lernplattform.},
  language  = {de}
}
@article{Pfaff2017,
  author    = {Pfaff, Raphael},
  title     = {Apps f{\"u}r den G{\"u}terwagen? Wie der G{\"u}terwagen 4.0 die effiziente Integration der G{\"u}terbahn in ERTMS erm{\"o}glicht},
  series = {Ingenieurspiegel},
  journal   = {Ingenieurspiegel},
  number    = {2},
  pages     = {1 -- 2},
  year      = {2017},
  language  = {de}
}
@article{Pfaff2023,
  author    = {Pfaff, Raphael},
  title     = {Braking distance prediction for vehicle consist in low-speed on-sight operation: a Monte Carlo approach},
  series = {Railway Engineering Science},
  volume    = {31},
  journal   = {Railway Engineering Science},
  number    = {2},
  publisher = {SpringerOpen},
  issn      = {2662-4753 (eISSN)},
  doi       = {10.1007/s40534-023-00303-7},
  pages     = {135 -- 144},
  year      = {2023},
  abstract  = {The first and last mile of a railway journey, in both freight and transit applications, constitutes a high effort and is either non-productive (e.g. in the case of depot operations) or highly inefficient (e.g. in industrial railways). These parts are typically managed on-sight, i.e. with no signalling and train protection systems ensuring the freedom of movement. This is possible due to the rather short braking distances of individual vehicles and shunting consists. The present article analyses the braking behaviour of such shunting units. For this purpose, a dedicated model is developed. It is calibrated on published results of brake tests and validated against a high-definition model for low-speed applications. Based on this model, multiple simulations are executed to obtain a Monte Carlo simulation of the resulting braking distances. Based on the distribution properties and established safety levels, the risk of exceeding certain braking distances is evaluated and maximum braking distances are derived. Together with certain parameters of the system, these can serve in the design and safety assessment of driver assistance systems and automation of these processes.},
  language  = {en}
}
@article{PfaffBurnham2009,
  author    = {Pfaff, Raphael and Burnham, Keith J.},
  title     = {On abstraction and interpretability: a behavioural perspective},
  series = {Systems Science},
  volume    = {Vol. 35},
  journal   = {Systems Science},
  number    = {Iss. 2},
  issn      = {0137-1223},
  pages     = {19 -- 26},
  year      = {2009},
  language  = {en}
}
@article{PfaffEnning2017,
  author    = {Pfaff, Raphael and Enning, Manfred},
  title     = {G{\"u}terwagen 4.0 - Der G{\"u}terwagen f{\"u}r das Internet der Dinge. Teil 2: Ausgew{\"a}hlte technische Aspekte und Prozesse},
  series = {ETR - Eisenbahntechnische Rundschau},
  volume    = {66},
  journal   = {ETR - Eisenbahntechnische Rundschau},
  number    = {5},
  publisher = {DVV Media Group},
  address   = {Hamburg},
  issn      = {0013-2845},
  pages     = {74 -- 77},
  year      = {2017},
  language  = {de}
}