@article{ScheidweilerTriesch2016,
  author    = {Scheidweiler, Robert and Triesch, Eberhard},
  title     = {A note on the duality between matchings and vertex covers in balanced hypergraphs},
  series = {Journal of Combinatorial Optimization},
  volume    = {32},
  journal   = {Journal of Combinatorial Optimization},
  number    = {2},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1573-2886},
  doi       = {10.1007/s10878-015-9887-5},
  pages     = {639 -- 644},
  year      = {2016},
  abstract  = {We present a new Min-Max theorem for an optimization problem closely connected to matchings and vertex covers in balanced hypergraphs. The result generalizes Kőnig's Theorem (Berge and Las Vergnas in Ann N Y Acad Sci 175:32-40, 1970; Fulkerson et al. in Math Progr Study 1:120-132, 1974) and Hall's Theorem (Conforti et al. in Combinatorica 16:325-329, 1996) for balanced hypergraphs.},
  language  = {en}
}
@inproceedings{ScheikReisgenSchleseretal.2012,
  author    = {Scheik, Sven and Reisgen, Uwe and Schleser, Markus and Huber, Frederic},
  title     = {Untersuchungen zum dehnungsbasierten Versagen von geklebten, oberfl{\"a}chenveredelten Blechen im Zugscherversuch},
  series = {2. Doktorandenseminar Klebtechnik : Vortr{\"a}ge der gleichnamigen Veranstaltung in Dresden am 5. und 6. September 2011},
  booktitle = {2. Doktorandenseminar Klebtechnik : Vortr{\"a}ge der gleichnamigen Veranstaltung in Dresden am 5. und 6. September 2011},
  publisher = {DVS-Media},
  address   = {D{\"u}sseldorf},
  organization    = {Institut f{\"u}r Schweißtechnik und F{\"u}getechnik Aachen> ; Doktorandenseminar Klebtechnik <2, 2011, Dresden>},
  isbn      = {978-3-87155-599-2},
  pages     = {73 -- 78},
  year      = {2012},
  language  = {de}
}
@inproceedings{ScheikReisgenSchleseretal.2012,
  author    = {Scheik, Sven and Reisgen, Uwe and Schleser, Markus and Huber, Frederic},
  title     = {Untersuchungen zum dehnungsbasierten Versagen von geklebten, oberfl{\"a}chenveredelten Blechen im Zugscherversuch},
  series = {2. Doktorandenseminar Klebtechnik : Vortr{\"a}ge der gleichnamigen Veranstaltung in Dresden am 5. und 6. September 2011. (DVS-Berichte ; 292)},
  booktitle = {2. Doktorandenseminar Klebtechnik : Vortr{\"a}ge der gleichnamigen Veranstaltung in Dresden am 5. und 6. September 2011. (DVS-Berichte ; 292)},
  publisher = {DVS Media},
  address   = {D{\"u}sseldorf},
  organization    = {Doktorandenseminar Klebtechnik <2, 2011, Dresden> ; Institut f{\"u}r Schweißtechnik und F{\"u}getechnik <Aachen>},
  isbn      = {978-3-87155-599-2},
  pages     = {73 -- 78},
  year      = {2012},
  language  = {de}
}
@article{ScheikSchleserReisgen2012,
  author    = {Scheik, Sven and Schleser, Markus and Reisgen, Uwe},
  title     = {Thermisches Direktf{\"u}gen von Metall und Kusntstoff: eine Alternative zur Klebtechnik},
  series = {Adh{\"a}sion : Kleben \& Dichten},
  volume    = {56},
  journal   = {Adh{\"a}sion : Kleben \& Dichten},
  number    = {11},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  issn      = {0001-8198 (E-Journal); 0001-8198 (Print)},
  doi       = {10.1007/s35145-012-0005-x},
  pages     = {36 -- 40},
  year      = {2012},
  abstract  = {Im Rahmen des Exzellenzclusters „Integrative Produktionstechnik f{\"u}r Hochlohnl{\"a}nder" der RWTHAachen University werden derzeit alternative Verfahren zur Herstellung von Metall/Kunststoff- Verbindungen untersucht. Eines davon ist das thermische Direktf{\"u}gen, das eine stoffschl{\"u}ssige Verbindung zwischen Kunststoff und Metall erm{\"o}glicht und ohne die Verwendung von Klebstoffen, Haftvermittlern oder mechanischen Verbindungshilfen auskommt.},
  language  = {de}
}
@incollection{Schleser2013,
  author    = {Schleser, Markus},
  title     = {F{\"u}gen f{\"u}r die Elektromobilit{\"a}t},
  series = {Innovation durch Kooperation : wie der Mittelstand durch Zusammenarbeit mit den Hochschulen seine Wettbewerbsf{\"a}higkeit steigert : Festschrift f{\"u}r Prof. Dr. rer. nat. Johannes Gartzen / Thomas Gartzen, Ute Gartzen (Hrsg.)},
  booktitle = {Innovation durch Kooperation : wie der Mittelstand durch Zusammenarbeit mit den Hochschulen seine Wettbewerbsf{\"a}higkeit steigert : Festschrift f{\"u}r Prof. Dr. rer. nat. Johannes Gartzen / Thomas Gartzen, Ute Gartzen (Hrsg.)},
  publisher = {Apprimus Verlag},
  address   = {Aachen},
  isbn      = {978-3-86359-136-6},
  pages     = {65 -- 70},
  year      = {2013},
  language  = {de}
}
@book{Schleser2008,
  author    = {Schleser, Markus},
  title     = {Einsatz polymerimpr{\"a}gnierter, alkaliresistenter Glastextilien zur Bewehrung zementgebundener Matrices. (Aachener Berichte F{\"u}getechnik ; Bd. 6)},
  publisher = {Shaker},
  address   = {Aachen},
  isbn      = {978-3-8322-7696-6},
  pages     = {XVI, 129 S. : Ill., graph. Darst.},
  year      = {2008},
  language  = {de}
}
@techreport{Schleser2011,
  author    = {Schleser, Markus},
  title     = {Untersuchung des konduktiven R{\"u}hrreibschweißens an Stahl- und Aluminiumwerkstoffen. Schlussbericht. F{\"o}rderkennzeichen: AIF 15687 N},
  pages     = {87 S.},
  year      = {2011},
  language  = {de}
}
@article{SchleserWalkLaufferRaupachetal.2006,
  author    = {Schleser, Markus and Walk-Lauffer, Bernd and Raupach, Michael and Dilthey, Ulrich},
  title     = {Application of polymers for textile-reinforced concrete},
  series = {Journal of materials in civil engineering : properties, applications, durability},
  volume    = {18},
  journal   = {Journal of materials in civil engineering : properties, applications, durability},
  number    = {5},
  issn      = {0899-1561},
  pages     = {670 -- 676},
  year      = {2006},
  language  = {en}
}
@inproceedings{SchleupenEngemannBagherietal.2016,
  author    = {Schleupen, Josef and Engemann, Heiko and Bagheri, Mohsen and Kallweit, Stephan},
  title     = {The potential of SMART climbing robot combined with a weatherproof cabin for rotor blade maintenance},
  series = {17th European Conference on Composite Materials - ECCM, Munich, Germany},
  booktitle = {17th European Conference on Composite Materials - ECCM, Munich, Germany},
  pages     = {1 -- 8},
  year      = {2016},
  language  = {en}
}
@inproceedings{SchleupenEngemannBagherietal.2017,
  author    = {Schleupen, Josef and Engemann, Heiko and Bagheri, Mohsen and Kallweit, Stephan and Dahmann, Peter},
  title     = {Developing a climbing maintenance robot for tower and rotor blade service of wind turbines},
  series = {Advances in Robot Design and Intelligent Control : Proceedings of the 25th Conference on Robotics in Alpe-Adria-Danube Region (RAAD16)},
  booktitle = {Advances in Robot Design and Intelligent Control : Proceedings of the 25th Conference on Robotics in Alpe-Adria-Danube Region (RAAD16)},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-319-49058-8},
  doi       = {10.1007/978-3-319-49058-8_34},
  pages     = {310 -- 319},
  year      = {2017},
  language  = {en}
}
@book{Schmidt2016,
  author    = {Schmidt, Bernd},
  title     = {Grundlagen der Elektrotechnik und Elektronik f{\"u}r Ingenieure der Schienenfahrzeugtechnik und anderer Fachrichtungen},
  edition   = {1. Aufl.},
  publisher = {B. Schmidt, Fachverlag f{\"u}r Elektro- und Informationstechnik},
  address   = {Bielefeld},
  isbn      = {978-3-944131-02-3},
  pages     = {XXIII, 255 Seiten : Illustrationen},
  year      = {2016},
  language  = {de}
}
@book{Schmidt2017,
  author    = {Schmidt, Bernd},
  title     = {Grundlagen der Elektrotechnik und Elektronik f{\"u}r Ingenieure der Schienenfahrzeugtechnik und anderer Fachrichtungen : mit 12 Tabellen und 221 Abbildungen ; NEU mit Verst{\"a}ndnisaufgaben und L{\"o}sungsbeispielen},
  edition   = {2. vollst{\"a}ndig {\"u}berarbeitete Auflage},
  publisher = {B. Schmidt, Fachverlag f{\"u}r Elektro- und Informationstechnik},
  address   = {Bielefeld},
  isbn      = {978-3-944131-03-0},
  pages     = {XXV, 307 Seiten : Illustrationen, Diagramme},
  year      = {2017},
  language  = {de}
}
@book{Schmidt2019,
  author    = {Schmidt, Bernd},
  title     = {Grundlagen der Elektrotechnik und Elektronik f{\"u}r Ingenieure der Schienenfahrzeugtechnik und anderer Fachrichtungen : neu mit neuem SI-System und weiteren Inhalten f{\"u}r Mechantroniker},
  edition   = {3. vollst{\"a}ndig {\"u}berarbeitete Auflage},
  publisher = {B. Schmidt, Fachverlag f{\"u}r Elektro- und Informationstechnik},
  address   = {Bielefeld},
  isbn      = {978-3-944131-04-7},
  pages     = {XXVI, 270 Seiten : Illustrationen, Diagramme},
  year      = {2019},
  language  = {de}
}
@article{SchmidtEnningPfaff2018,
  author    = {Schmidt, Bernd and Enning, Manfred and Pfaff, Raphael},
  title     = {G{\"u}terwagen 4.0 - Der G{\"u}terwagen f{\"u}r das Internet der Dinge Teil 3: Einf{\"u}hrungsszenarien f{\"u}r aktive, kommunikative G{\"u}terwagen},
  series = {ETR - Eisenbahntechnische Rundschau},
  volume    = {67},
  journal   = {ETR - Eisenbahntechnische Rundschau},
  number    = {5},
  publisher = {DVV Media Group},
  address   = {Hamburg},
  issn      = {0013-2845},
  pages     = {60 -- 64},
  year      = {2018},
  abstract  = {Wenn durch innovative, automatisierte G{\"u}terwagen betriebswirtschaftliche Vorteile nutzbar gemacht werden sollen, muss die Migration auf das neue System in sinnvollen Teilschritten unter Ber{\"u}cksichtigung der organisationellen und betrieblichen Vereinbarkeit vorgenommen werden. Eine stufenweise Migration mit Nachr{\"u}stbarkeit und Kompatibilit{\"a}t kann die optimale Ausstattungsvariante f{\"u}r die unterschiedlichen Betriebsszenarien sowie eine Steigerung der Wirtschaftlichkeit des Gesamtsystems bieten.},
  language  = {de}
}
@incollection{Schmidt2014,
  author    = {Schmidt, Herbert},
  title     = {Angst vor Zukunft, Lust auf Zukunft},
  series = {Re|peat-Jahrbuch Treasury und Private Banking : Produkte, M{\"a}rkte und Strategien zum Nachschlagen und Verstehen},
  booktitle = {Re|peat-Jahrbuch Treasury und Private Banking : Produkte, M{\"a}rkte und Strategien zum Nachschlagen und Verstehen},
  publisher = {Roland Eller},
  address   = {Potsdam},
  pages     = {255 -- 269},
  year      = {2014},
  language  = {de}
}
@incollection{Schmidt2013,
  author    = {Schmidt, Herbert},
  title     = {Finanzierungspartnerwahl durch mittelst{\"a}ndische Unternehmen},
  series = {Innovation durch Kooperation : wie der Mittelstand durch Zusammenarbeit mit den Hochschulen seine Wettbewerbsf{\"a}higkeit steigert ; Festschrift f{\"u}r Prof. Dr. rer. nat. Johannes Gartzen / Thomas Gartzen, Ute Gartzen (Hrsg.)},
  booktitle = {Innovation durch Kooperation : wie der Mittelstand durch Zusammenarbeit mit den Hochschulen seine Wettbewerbsf{\"a}higkeit steigert ; Festschrift f{\"u}r Prof. Dr. rer. nat. Johannes Gartzen / Thomas Gartzen, Ute Gartzen (Hrsg.)},
  publisher = {Apprimus Verlag},
  address   = {Aachen},
  isbn      = {978-3-86359-136-6},
  pages     = {163 -- 166},
  year      = {2013},
  language  = {de}
}
@inproceedings{SchmidtKaschEichleretal.2021,
  author    = {Schmidt, Thomas and Kasch, Susanne and Eichler, Fabian and Thurn, Laura},
  title     = {Process strategies on laser-based melting of glass powder},
  series = {Lasers in Manufacturing Conference 2021},
  booktitle = {Lasers in Manufacturing Conference 2021},
  pages     = {10 Seiten},
  year      = {2021},
  abstract  = {This paper presents the laser-based powder bed fusion (L-PBF) using various glass powders (borosilicate and quartz glass). Compared to metals, these require adapted process strategies. First, the glass powders were characterized with regard to their material properties and their processability in the powder bed. This was followed by investigations of the melting behavior of the glass powders with different laser wavelengths (10.6 µm, 1070 nm). In particular, the experimental setup of a CO2 laser was adapted for the processing of glass powder. An experimental setup with integrated coaxial temperature measurement/control and an inductively heatable build platform was created. This allowed the L-PBF process to be carried out at the transformation temperature of the glasses. Furthermore, the component's material quality was analyzed on three-dimensional test specimen with regard to porosity, roughness, density and geometrical accuracy in order to evaluate the developed L-PBF parameters and to open up possible applications.},
  language  = {en}
}
@article{Schmitt2005,
  author    = {Schmitt, Rolf W.},
  title     = {Werkstoffe - Oberfl{\"a}chen - Schmierstoffe - Tribologie-Fachtagung 2004 in G{\"o}ttingen},
  series = {Erd{\"o}l Erdgas Kohle. 121 (2005), H. 1},
  journal   = {Erd{\"o}l Erdgas Kohle. 121 (2005), H. 1},
  isbn      = {0179-3187},
  pages     = {39 -- 40},
  year      = {2005},
  language  = {de}
}
@article{Schmitt2005,
  author    = {Schmitt, Rolf W.},
  title     = {Innovationen bei Schmierstoffen und tribologischen Systemen},
  series = {Stahl und Eisen. 125 (2005), H. 3},
  journal   = {Stahl und Eisen. 125 (2005), H. 3},
  isbn      = {0340-4803},
  pages     = {51 -- 53},
  year      = {2005},
  language  = {de}
}
@article{SchmittBlankSchoenbrunn1983,
  author    = {Schmitt, Rolf W. and Blank, K. and Schoenbrunn, G.},
  title     = {Experimentelle Spannungsanalyse zum Doppelringverfahren},
  series = {Sprechsaal : internat. ceramics \& glass magazine. 116 (1983), H. 5},
  journal   = {Sprechsaal : internat. ceramics \& glass magazine. 116 (1983), H. 5},
  isbn      = {0341-0439},
  pages     = {397 -- 405},
  year      = {1983},
  language  = {de}
}
@misc{SchoeneGlowaniaSchleseretal.2011,
  author    = {Schoene, Jens and Glowania, Michael and Schleser, Markus and Gries, Thomas and Reisgen, Uwe},
  title     = {Betonteil und Verfahren zum Bewehren von Teilen aus Beton / Offenlegungsschrift},
  publisher = {Dt. Patent- und Markenamt},
  address   = {M{\"u}nchen},
  pages     = {6 S. : graph. Darst.},
  year      = {2011},
  language  = {de}
}
@inproceedings{SchoeneReisgenSchleser2012,
  author    = {Schoene, Jens and Reisgen, Uwe and Schleser, Markus},
  title     = {Verbundverhalten der polymeren Interphase in textibewehrtem Beton},
  series = {2. Doktorandenseminar Klebtechnik : Vortr{\"a}ge der gleichnamigen Veranstaltung in Dresden am 5. und 6. September 2011. (DVS-Berichte ; 292)},
  booktitle = {2. Doktorandenseminar Klebtechnik : Vortr{\"a}ge der gleichnamigen Veranstaltung in Dresden am 5. und 6. September 2011. (DVS-Berichte ; 292)},
  publisher = {DVS-Media},
  address   = {D{\"u}sseldorf},
  organization    = {Doktorandenseminar Klebtechnik <2, 2011, Dresden> ; Institut f{\"u}r Schweißtechnik und F{\"u}getechnik <Aachen>},
  isbn      = {978-3-87155-599-2},
  pages     = {50 -- 56},
  year      = {2012},
  language  = {de}
}
@inproceedings{SchoeneReisgenSchleseretal.2011,
  author    = {Schoene, Jens and Reisgen, Uwe and Schleser, Markus and Jerabek, Jakub},
  title     = {Theoretische und experimentelle Untersuchung des spaltungsinduzierten Versagens von TRC Pr{\"u}fk{\"o}rpern},
  series = {Textilbeton - Theorie und Praxis : Tagungsband zum 6. Kolloquium zu textilbewehrten Tragwerken (CTRS6); gemeinsames Abschlusskolloquium der Sonderforschungsbereiche 528 (Dresden) und 532 (Aachen), Berlin 19.9.2011 - 20.9.2011},
  booktitle = {Textilbeton - Theorie und Praxis : Tagungsband zum 6. Kolloquium zu textilbewehrten Tragwerken (CTRS6); gemeinsames Abschlusskolloquium der Sonderforschungsbereiche 528 (Dresden) und 532 (Aachen), Berlin 19.9.2011 - 20.9.2011},
  editor    = {Curbach, Manfred},
  publisher = {Techn. Univ.},
  address   = {Dresden},
  isbn      = {978-3-86780-245-1},
  pages     = {73 -- 84},
  year      = {2011},
  language  = {de}
}
@inproceedings{SchoeneReisgenSchleseretal.2010,
  author    = {Schoene, Jens and Reisgen, Uwe and Schleser, Markus and Jerabek, Jakub and Chudoba, Rostislav},
  title     = {Theoretical and experimental investigations on textile-reinforced concrete spalling behavior},
  series = {8th International PhD Symposium in Civil Engineering : Lyngby, June 20-23, 2010 : proceedings},
  booktitle = {8th International PhD Symposium in Civil Engineering : Lyngby, June 20-23, 2010 : proceedings},
  editor    = {Fisher, Gregor},
  publisher = {Technical University of Denmark, Dept. of Civil Engineering},
  address   = {Lyngby},
  organization    = {PhD Symposium in Civil Engineering <8, 2010, Lyngby> ; International Federation for Structural Concrete},
  isbn      = {9788778773012},
  pages     = {383 -- 388},
  year      = {2010},
  language  = {en}
}
@article{SchwarzGebhardtSchleseretal.2019,
  author    = {Schwarz, Alexander and Gebhardt, Andreas and Schleser, Markus and Popoola, Patricia},
  title     = {New Welding Joint Geometries Manufactured by Powder Bed Fusion from 316L},
  series = {Materials Performance and Characterization 8},
  journal   = {Materials Performance and Characterization 8},
  number    = {in press},
  issn      = {2379-1365},
  doi       = {10.1520/MPC20180096},
  year      = {2019},
  language  = {en}
}
@incollection{SchuermannBudaJonkeretal.2010,
  author    = {Sch{\"u}rmann, Volker and Buda, Aurel and Jonker, Stefan and Palmhof, Norman and Wollert, J{\"o}rg},
  title     = {Wireless in future automotive applications},
  series = {Mobile and wireless communications network layer and circuit level design / ed. by Salma Ait Fares ...},
  booktitle = {Mobile and wireless communications network layer and circuit level design / ed. by Salma Ait Fares ...},
  publisher = {Intech},
  address   = {London},
  isbn      = {978-953-307-042-1},
  pages     = {71 -- 92},
  year      = {2010},
  language  = {en}
}
@inproceedings{SchuermannBudaWollert2008,
  author    = {Sch{\"u}rmann, Volker and Buda, Aurel and Wollert, J{\"o}rg},
  title     = {XML-based Middleware approach for industrial wireless communication systems},
  series = {IEEE International Conference on Emerging Technologies and Factory Automation, 2008 : ETFA 2008 ; 15 - 18 Sept., 2008, Hamburg, Germany},
  booktitle = {IEEE International Conference on Emerging Technologies and Factory Automation, 2008 : ETFA 2008 ; 15 - 18 Sept., 2008, Hamburg, Germany},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  organization    = {Institute of Electrical and Electronics Engineers},
  isbn      = {978-1-4244-1505-2},
  doi       = {10.1109/ETFA.2008.4638463},
  pages     = {632 -- 639},
  year      = {2008},
  language  = {en}
}
@inproceedings{SchuermannKellerWollert2010,
  author    = {Sch{\"u}rmann, Volker and Keller, A. and Wollert, J{\"o}rg},
  title     = {Geb{\"a}udeautomation mit Webtechnologien : ein Erfahrungsbericht},
  series = {Automation 2010 : der 11. Branchentreff der Mess- und Automatisierungstechnik ; Kongress Baden-Baden, 15. und 16. Juni 2010. (VDI-Berichte ; 2092)},
  booktitle = {Automation 2010 : der 11. Branchentreff der Mess- und Automatisierungstechnik ; Kongress Baden-Baden, 15. und 16. Juni 2010. (VDI-Berichte ; 2092)},
  publisher = {VDI-Verl.},
  address   = {D{\"u}sseldorf},
  organization    = {VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik},
  isbn      = {978-3-18-092092-4},
  pages     = {321 -- 324},
  year      = {2010},
  language  = {de}
}
@inproceedings{SchuermannKellerWollert2009,
  author    = {Sch{\"u}rmann, Volker and Keller, Alex and Wollert, J{\"o}rg},
  title     = {Konvergenz von drahtlosen und drahtgebundenen Kommunikationstechnologien in der Geb{\"a}udeautomation},
  series = {Wireless technologies : von der Technologie zur Anwendung ; 11. Kongress, 29. - 30. September 2009, Stuttgart / [11. Wireless-Technologies-Kongress]. (Fortschritt-Berichte VDI : Reihe 10, Informatik, Kommunikation ; Nr. 800)},
  booktitle = {Wireless technologies : von der Technologie zur Anwendung ; 11. Kongress, 29. - 30. September 2009, Stuttgart / [11. Wireless-Technologies-Kongress]. (Fortschritt-Berichte VDI : Reihe 10, Informatik, Kommunikation ; Nr. 800)},
  publisher = {VDI-Verl.},
  address   = {D{\"u}sseldorf},
  organization    = {Wireless-Technologies-Kongress <11, 2009, Stuttgart>},
  isbn      = {978-3-18-380010-0},
  pages     = {197 -- 205},
  year      = {2009},
  language  = {de}
}
@inproceedings{SchuermannKellerWollert2009,
  author    = {Sch{\"u}rmann, Volker and Keller, Alex and Wollert, J{\"o}rg},
  title     = {Internet based middleware approach for building services},
  series = {Proceedings / IMETI 2009, the 2nd International Multi-Conference on Engineering and Technological Innovation : July 10 - 13, 2009 Orlando, Florida, USA ; vol. 1},
  booktitle = {Proceedings / IMETI 2009, the 2nd International Multi-Conference on Engineering and Technological Innovation : July 10 - 13, 2009 Orlando, Florida, USA ; vol. 1},
  publisher = {IIIS},
  address   = {Winter Garden, Fla.},
  organization    = {International Multi-Conference on Engineering and Technological Innovation <2, 2009, Orlando, Fla.>},
  isbn      = {1-934272-68-X ; 978-1-934272-68-8},
  pages     = {30 -- 34},
  year      = {2009},
  language  = {en}
}
@inproceedings{SchuermannLeidingerWollert2010,
  author    = {Sch{\"u}rmann, Volker and Leidinger, R. and Wollert, J{\"o}rg},
  title     = {Simplified rapid-prototyping with automation technology},
  series = {Automobiles and sustainable mobility : FISITA 2010 World Automotive Congress, 30 May - 4 June, Budapest, Hungary ; proceedings},
  booktitle = {Automobiles and sustainable mobility : FISITA 2010 World Automotive Congress, 30 May - 4 June, Budapest, Hungary ; proceedings},
  organization    = {FISITA 2010 World Automotive Congress <Budapest>},
  isbn      = {978-963-9058-29-3},
  pages     = {F2010C093},
  year      = {2010},
  language  = {en}
}
@inproceedings{SchuermannMannBudaetal.2009,
  author    = {Sch{\"u}rmann, Volker and Mann, Thorsten and Buda, Aurel and Wollert, J{\"o}rg},
  title     = {Integrating bluetooth localization into existing TCP/IP networks},
  series = {IEEE International Workshop on Intelligent Data Acquisition and Advanced Computing Systems: Technology and Applications, 2009 : IDAACS 2009 ; Rende, Cosenza, Italy, 21 - 23 Sept. 2009},
  booktitle = {IEEE International Workshop on Intelligent Data Acquisition and Advanced Computing Systems: Technology and Applications, 2009 : IDAACS 2009 ; Rende, Cosenza, Italy, 21 - 23 Sept. 2009},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  organization    = {International Workshop on Intelligent Data Acquisition and Advanced Computing Systems <5, 2009, Rende, Cosenza, Italy>},
  isbn      = {978-1-4244-4882-1 ; ISBN: 978-1-4244-4901-9},
  doi       = {10.1109/IDAACS.2009.5342903},
  pages     = {621 -- 624},
  year      = {2009},
  language  = {en}
}
@inproceedings{SchuermannWollert2008,
  author    = {Sch{\"u}rmann, Volker and Wollert, J{\"o}rg},
  title     = {Ortsbezogene Fernwartungsdienste mit Bluetooth Ranging und Java Micro Edition},
  series = {Automation 2008: L{\"o}sungen f{\"u}r die Zukunft ; der Automatisierungskongress in Deutschland ; Tagung Baden-Baden, 3. und 4. Juni 2008. (VDI-Berichte ; 2032)},
  booktitle = {Automation 2008: L{\"o}sungen f{\"u}r die Zukunft ; der Automatisierungskongress in Deutschland ; Tagung Baden-Baden, 3. und 4. Juni 2008. (VDI-Berichte ; 2032)},
  publisher = {VDI-Verl.},
  address   = {D{\"u}sseldorf},
  organization    = {Automatisierungskongress <2008, Baden-Baden>},
  isbn      = {978-3-18-092032-0},
  pages     = {353 -- 356},
  year      = {2008},
  language  = {de}
}
@inproceedings{SchuermannWollert2008,
  author    = {Sch{\"u}rmann, Volker and Wollert, J{\"o}rg},
  title     = {Location based Services in der Geb{\"a}udeautomation},
  series = {Wireless Technologies Kongress 2008: von der Technologie zur Anwendung ; [10. Kongress, 23. - 24. September 2008, Bochum]},
  booktitle = {Wireless Technologies Kongress 2008: von der Technologie zur Anwendung ; [10. Kongress, 23. - 24. September 2008, Bochum]},
  publisher = {Aka},
  address   = {Heidelberg},
  organization    = {Wireless-Technologies-Kongress <10, 2008, Bochum>},
  isbn      = {978-3-89838-608-1},
  pages     = {313 -- 322},
  year      = {2008},
  language  = {de}
}
@article{SedlacekSchaetzkeGessleretal.2004,
  author    = {Sedlacek, G. and Sch{\"a}tzke, C. and Geßler, M. and Schleser, Markus},
  title     = {F{\"u}gen von Bauteilen aus textilbewehrtem Beton},
  series = {Der Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen ; offizielle Zeitschrift der VDI-Gesellschaft Bautechnik. Bd. 79 (2004), H. 12},
  journal   = {Der Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen ; offizielle Zeitschrift der VDI-Gesellschaft Bautechnik. Bd. 79 (2004), H. 12},
  issn      = {0005-6650},
  pages     = {569 -- 575},
  year      = {2004},
  language  = {de}
}
@inproceedings{SeilerGeorgePfaffetal.2005,
  author    = {Seiler, Friedrich and George, Alfred and Pfaff, Raphael and Srulijes, Julio},
  title     = {Stand der Entwicklung des ISL Dopplerbildverfahrens},
  series = {GALA : 13. Fachtagung Lasermethoden in der Str{\"o}mungsmesstechnik : 6. - 8. September 2005, Cottbus},
  booktitle = {GALA : 13. Fachtagung Lasermethoden in der Str{\"o}mungsmesstechnik : 6. - 8. September 2005, Cottbus},
  publisher = {Techn. Univ.},
  address   = {Cottbus},
  organization    = {Fachtagung Lasermethoden in der Str{\"o}mungsmesstechnik <13, 2005, Cottbus>},
  isbn      = {3-9805613-2-1},
  pages     = {24-1 -- 24-8},
  year      = {2005},
  language  = {de}
}
@inproceedings{SeilerPichlerPfaffetal.2008,
  author    = {Seiler, Friedrich and Pichler, Alexander and Pfaff, Raphael and George, Alfred and Srulijes, Julio},
  title     = {Improved Doppler picture velocimetry and new automated processing},
  series = {14th International Symposium on Applications of Laser Techniques to Fluid Mechanics : Lisbon, Portugal, 7 - 10 July 2008},
  booktitle = {14th International Symposium on Applications of Laser Techniques to Fluid Mechanics : Lisbon, Portugal, 7 - 10 July 2008},
  organization    = {International Symposium on Applications of Laser Techniques to Fluid Mechanics <14, 2008, Lisboa>},
  pages     = {1 -- 12},
  year      = {2008},
  language  = {en}
}
@article{SeilerPichlerPfaffetal.2009,
  author    = {Seiler, Friedrich and Pichler, Alexander and Pfaff, Raphael and Srulijes, Julio},
  title     = {Novel processing tools for automated doppler picture velocimetry (DPV) evaluation},
  series = {Journal of visualization},
  volume    = {Vol. 12},
  journal   = {Journal of visualization},
  number    = {Iss. 4},
  issn      = {1343-8875},
  pages     = {323 -- 337},
  year      = {2009},
  language  = {en}
}
@inproceedings{ShahidiPfaffEnning2017,
  author    = {Shahidi, Parham and Pfaff, Raphael and Enning, Manfred},
  title     = {The connected wagon - a concept for the integration of vehicle side sensors and actors with cyber physical representation for condition based maintenance},
  series = {First International Conference on Rail Transportation},
  booktitle = {First International Conference on Rail Transportation},
  pages     = {1 -- 8},
  year      = {2017},
  language  = {en}
}
@article{Starke2002,
  author    = {Starke, G{\"u}nther},
  title     = {Mechatronik und Robotik in der Fertigung - Entwicklung eines integrierten Fertigungskonzepts zur automatisierten Regenerierung von Umformwerkzeugen},
  series = {Advanced driving systems : Tagungsband / ISOM Chemnitz 2002, Chemnitz, Germany, March 21 - 22, 2002. Ed. by Peter Maisser},
  journal   = {Advanced driving systems : Tagungsband / ISOM Chemnitz 2002, Chemnitz, Germany, March 21 - 22, 2002. Ed. by Peter Maisser},
  publisher = {Inst. f{\"u}r Mechatronik},
  address   = {Chemnitz},
  isbn      = {3-00-007504-6},
  pages     = {193 -- 203},
  year      = {2002},
  language  = {de}
}
@article{Starke2002,
  author    = {Starke, G{\"u}nther},
  title     = {Integriertes Fertigungskonzept zum automatisierten Reparaturschweißen mit Robotern},
  series = {DVS-Berichte. 217 (2002)},
  journal   = {DVS-Berichte. 217 (2002)},
  isbn      = {0418-9639},
  pages     = {10 -- 13},
  year      = {2002},
  language  = {de}
}
@article{Starke2001,
  author    = {Starke, G{\"u}nther},
  title     = {Virtual Reality und Simulation als integrierte Werkzeuge f{\"u}r die Entwicklung mechatronischer Systeme},
  series = {VDI-Berichte. 1631 (2001)},
  journal   = {VDI-Berichte. 1631 (2001)},
  isbn      = {0083-5560},
  pages     = {1 -- 17},
  year      = {2001},
  language  = {de}
}
@article{Starke1999,
  author    = {Starke, G{\"u}nther},
  title     = {Das Verbundvorhaben 'PROJOIN'. Motivation und Ziele.},
  series = {Qualit{\"a}tsorientierte Schweißtechnik als Wettbewerbsfaktor : neue Wege f{\"u}r die Fertigung von morgen ; Ergebnisse einer vom BMBF gef{\"o}rderten europ{\"a}ischen Forschungskooperation im Rahmen von EUREKA-FAKTORY] / P. Drews ; G. K{\"o}hler (Hrsg.)},
  journal   = {Qualit{\"a}tsorientierte Schweißtechnik als Wettbewerbsfaktor : neue Wege f{\"u}r die Fertigung von morgen ; Ergebnisse einer vom BMBF gef{\"o}rderten europ{\"a}ischen Forschungskooperation im Rahmen von EUREKA-FAKTORY] / P. Drews ; G. K{\"o}hler (Hrsg.)},
  publisher = {DVS-Verl},
  address   = {D{\"u}sseldorf},
  isbn      = {3-87155-663-7},
  pages     = {7 -- 14},
  year      = {1999},
  language  = {de}
}
@article{Starke1982,
  author    = {Starke, G{\"u}nther},
  title     = {Ein Steuerungskonzept zum automatischen Lichtbogenschweissen},
  series = {DVS-Berichte. 73 (1982)},
  journal   = {DVS-Berichte. 73 (1982)},
  isbn      = {0418-9639},
  pages     = {109 -- 114},
  year      = {1982},
  language  = {de}
}
@article{Starke1986,
  author    = {Starke, G{\"u}nther},
  title     = {Sensoren fuer Schutzgasschweissroboter: Problemstellung, Funktionsweise, Handhabung und Programmierung von praxiserprobten Systemen},
  pages     = {1 -- 22},
  year      = {1986},
  language  = {de}
}
@article{Starke1984,
  author    = {Starke, G{\"u}nther},
  title     = {Prozesssteuerung und Automatisierung in der Schweisstechnik},
  pages     = {341 -- 351},
  year      = {1984},
  language  = {de}
}
@article{Starke1994,
  author    = {Starke, G{\"u}nther},
  title     = {Welding in the century of information technology. Session 1},
  series = {Welding in the World. 34 (1994), H. 9},
  journal   = {Welding in the World. 34 (1994), H. 9},
  isbn      = {0043-2288},
  pages     = {1 -- 20},
  year      = {1994},
  language  = {en}
}
@article{Starke1988,
  author    = {Starke, G{\"u}nther},
  title     = {Auftragsbezogene Fertigung beim Schutzgasschweissen mit Robotern durch Einsatz flexibler Fertigungssysteme},
  series = {DVS-Berichte. 118 (1988)},
  journal   = {DVS-Berichte. 118 (1988)},
  isbn      = {0418-9639},
  pages     = {27 -- 31},
  year      = {1988},
  language  = {de}
}
@article{Starke1988,
  author    = {Starke, G{\"u}nther},
  title     = {Einsatzmoeglichkeiten des Roboterschweissens im Behaelterbau},
  series = {DVS-Berichte. 115 (1988)},
  journal   = {DVS-Berichte. 115 (1988)},
  isbn      = {0418-9639},
  pages     = {38 -- 43},
  year      = {1988},
  language  = {de}
}
@article{Starke1987,
  author    = {Starke, G{\"u}nther},
  title     = {Nahtfuehrungssensor zur adaptiven Steuerung von Handhabungseinrichtungen fuer das Lichtbogenschweissen},
  series = {Schweissen und Schneiden. 39 (1987), H. 4},
  journal   = {Schweissen und Schneiden. 39 (1987), H. 4},
  isbn      = {0036-7184},
  pages     = {191 -- 192},
  year      = {1987},
  language  = {de}
}
@article{Starke1999,
  author    = {Starke, G{\"u}nther},
  title     = {PC-gest{\"u}tzte Programmierung einer Orbitalschweißanlage},
  series = {Qualit{\"a}tsorientierte Schweißtechnik als Wettbewerbsfaktor, DVS-Berichte. 196 (1999)},
  journal   = {Qualit{\"a}tsorientierte Schweißtechnik als Wettbewerbsfaktor, DVS-Berichte. 196 (1999)},
  isbn      = {0418-9639},
  pages     = {65 -- 68},
  year      = {1999},
  language  = {de}
}
@article{Starke1999,
  author    = {Starke, G{\"u}nther},
  title     = {Verschleißerkennung und -darstellung f{\"u}r das automatisierte Reparaturschweißen},
  series = {Qualit{\"a}tsorientierte Schweißtechnik als Wettbewerbsfaktor, DVS-Berichte. 196 (1999)},
  journal   = {Qualit{\"a}tsorientierte Schweißtechnik als Wettbewerbsfaktor, DVS-Berichte. 196 (1999)},
  isbn      = {0418-9639},
  pages     = {111 -- 127},
  year      = {1999},
  language  = {de}
}
@article{Starke1998,
  author    = {Starke, G{\"u}nther},
  title     = {Prozeßkontrolle und Prozeßsteuerung f{\"u}r die Fertigung in schweißtechnischen Betrieben},
  pages     = {45 -- 52},
  year      = {1998},
  language  = {de}
}
@inproceedings{Starke2009,
  author    = {Starke, G{\"u}nther},
  title     = {Robotertechnik f{\"u}r individuelle Automatisierungsl{\"o}sungen und unterschiedlichste Prozessanwendungen : 17. Internationale Fachmesse „Schweißen \& Schneiden 2009" - Stand und Entwicklungstendenzen},
  series = {Schweissen und Schneiden},
  booktitle = {Schweissen und Schneiden},
  publisher = {DVS - Deutscher Verband f{\"u}r Schweißen und Verwandte Verfahren e.V.},
  issn      = {0036-7184 (Print)},
  pages     = {N 13 (nach Seite 716)},
  year      = {2009},
  language  = {de}
}
@article{StarkeAhlbehrendtBischoffetal.2009,
  author    = {Starke, G{\"u}nther and Ahlbehrendt, Norbert and Bischoff, Rainer and Melzer, Harald and Sieber, Sven and Senk, Burkhard and Kramarczyk, Peter},
  title     = {RoboTOOL. Technologien f{\"u}r den ortsflexiblen Einsatz von Robotern bei tempor{\"a}ren Arbeitsaufgaben in der Fertigung},
  series = {wt Werkstattstechnik online},
  volume    = {Bd. 99},
  journal   = {wt Werkstattstechnik online},
  number    = {H. 9},
  issn      = {1436-4980},
  pages     = {661 -- 670},
  year      = {2009},
  language  = {de}
}
@article{StarkeBeckmannRogosetal.1987,
  author    = {Starke, G{\"u}nther and Beckmann, L.-H. and Rogos, J. and Schmall, K-H. (u.a.)},
  title     = {Sensoren in der automatisierten Schweisstechnik},
  pages     = {61 -- 147},
  year      = {1987},
  language  = {de}
}
@article{StarkeCichon2004,
  author    = {Starke, G{\"u}nther and Cichon, Carsten},
  title     = {Fortgeschrittene Benutzeroberfl{\"a}che f{\"u}r eine neue Roboterkinematik in unstrukturierter Schweißumgebung},
  series = {Mechatronics \& robotics 2004 : Aachen, Germany, September 13 - 15, 2004 / [IEEE ...]. Drews, Paul [ed.].},
  journal   = {Mechatronics \& robotics 2004 : Aachen, Germany, September 13 - 15, 2004 / [IEEE ...]. Drews, Paul [ed.].},
  publisher = {Eysoldt},
  address   = {Aachen},
  isbn      = {3-938153-30-X},
  pages     = {373 -- 377},
  year      = {2004},
  language  = {de}
}
@article{StarkeDrews1983,
  author    = {Starke, G{\"u}nther and Drews, P.},
  title     = {Qualitaetssicherung in der automatisierten schweisstechnischen Fertigung durch Einsatz von Sensoren},
  series = {Sensor. 6 (1983)},
  journal   = {Sensor. 6 (1983)},
  pages     = {29 -- 45},
  year      = {1983},
  language  = {de}
}
@article{StarkeDrews1984,
  author    = {Starke, G{\"u}nther and Drews, P.},
  title     = {Optisch-elektronischer Nahtfuehrungssensor zur Schweissnahtverfolgung},
  series = {Technisches Messen tm. 51 (1984), H. 7/8},
  journal   = {Technisches Messen tm. 51 (1984), H. 7/8},
  isbn      = {0171-8096},
  pages     = {270 -- 275},
  year      = {1984},
  language  = {de}
}
@article{StarkeDrews1984,
  author    = {Starke, G{\"u}nther and Drews, P.},
  title     = {Stand der Sensorentwicklung fuer Schutzgasschweissroboter},
  series = {Schweissen und Schneiden. 36 (1984), H. 4},
  journal   = {Schweissen und Schneiden. 36 (1984), H. 4},
  isbn      = {0036-7184},
  pages     = {166 -- 172},
  year      = {1984},
  language  = {de}
}
@article{StarkeDrews1979,
  author    = {Starke, G{\"u}nther and Drews, P.},
  title     = {Automatisches Nahtfuehrungssystem an einem Industrie-Roboter},
  series = {VDI Berichte (1979)},
  journal   = {VDI Berichte (1979)},
  isbn      = {0083-5560},
  pages     = {79 -- 85},
  year      = {1979},
  language  = {de}
}
@article{StarkeDrews1982,
  author    = {Starke, G{\"u}nther and Drews, P.},
  title     = {Anwendungsmoeglichkeiten von Schweissrobotern und automatisierten Schweisssystemen im Schiffbau},
  series = {Schweisstechnik. 32 (1982), H. 7},
  journal   = {Schweisstechnik. 32 (1982), H. 7},
  isbn      = {0036-7192},
  pages     = {305 -- 308},
  year      = {1982},
  language  = {de}
}
@article{StarkeDrews1983,
  author    = {Starke, G{\"u}nther and Drews, P.},
  title     = {Qualitaetssicherung in der automatisierten schweisstechnischen Fertigung durch Einsatz von Sensoren},
  series = {Technisches Messen tm. 50 (1983), H. 12},
  journal   = {Technisches Messen tm. 50 (1983), H. 12},
  isbn      = {0171-8096},
  pages     = {467 -- 473},
  year      = {1983},
  language  = {de}
}
@article{StarkeDrews1995,
  author    = {Starke, G{\"u}nther and Drews, P.},
  title     = {Universelles Roboterprogrammiersystem zur Fertigung von Großfahrzeugen},
  series = {Schweißen und Schneiden. 47 (1995), H. 9},
  journal   = {Schweißen und Schneiden. 47 (1995), H. 9},
  isbn      = {0036-7184},
  pages     = {707 -- 713},
  year      = {1995},
  language  = {de}
}
@article{StarkeDrews1994,
  author    = {Starke, G{\"u}nther and Drews, P.},
  title     = {Le soudage au siecle de l'informatique},
  series = {Souder. 18 (1994), H. 6},
  journal   = {Souder. 18 (1994), H. 6},
  isbn      = {0246-1900},
  pages     = {33 -- 44},
  year      = {1994},
  language  = {en}
}
@article{StarkeDrews1992,
  author    = {Starke, G{\"u}nther and Drews, P.},
  title     = {Sensorik f{\"u}r das Schutzgasschweißen mit Robotern},
  series = {DVS-Berichte. 143 (1992)},
  journal   = {DVS-Berichte. 143 (1992)},
  isbn      = {0418-9639},
  pages     = {62 -- 66},
  year      = {1992},
  language  = {de}
}
@article{StarkeDrews1985,
  author    = {Starke, G{\"u}nther and Drews, P.},
  title     = {Development approaches for advanced control in automated arc welding},
  pages     = {115 -- 124},
  year      = {1985},
  language  = {en}
}
@article{StarkeDrews1985,
  author    = {Starke, G{\"u}nther and Drews, P.},
  title     = {Sensoren in der Schweisstechnik},
  series = {Die Umschau. 84 (1985), H. 5},
  journal   = {Die Umschau. 84 (1985), H. 5},
  isbn      = {0041-6347},
  pages     = {296 -- 300},
  year      = {1985},
  language  = {de}
}
@article{StarkeDrewsHackeletal.2003,
  author    = {Starke, G{\"u}nther and Drews, P. and Hackel, M. and Kremer-Wasmuht, S.},
  title     = {Automatisiertes Auftragschweißen zur Instandsetzung von Umformwerkzeugen},
  series = {Reparatur und Herstellung von technischen Oberfl{\"a}chen an Werkzeugen und Maschinenbauteilen : neue Technologien f{\"u}r die Produktion von morgen ; Ergebnisbericht des EUREKA-FACTORY Verbundprojektes PROSURF / P. Drews ... (Hrsg.)},
  journal   = {Reparatur und Herstellung von technischen Oberfl{\"a}chen an Werkzeugen und Maschinenbauteilen : neue Technologien f{\"u}r die Produktion von morgen ; Ergebnisbericht des EUREKA-FACTORY Verbundprojektes PROSURF / P. Drews ... (Hrsg.)},
  publisher = {Shaker},
  address   = {Aachen},
  isbn      = {3-8322-1537-9},
  pages     = {19 -- 28},
  year      = {2003},
  language  = {de}
}
@article{StarkeDrewsPoppen1996,
  author    = {Starke, G{\"u}nther and Drews, P. and Poppen, M.},
  title     = {Funktions{\"u}berwachung von Stromkontaktrohren beim MAG-Hochleistungsschweißen mittels K{\"o}rperschallinformationen},
  series = {Schweißen und Schneiden. 48 (1996), H. 9},
  journal   = {Schweißen und Schneiden. 48 (1996), H. 9},
  isbn      = {0036-7184},
  pages     = {675 -- 682},
  year      = {1996},
  language  = {de}
}
@article{StarkeHackel2004,
  author    = {Starke, G{\"u}nther and Hackel, Matthias},
  title     = {Integrierte Oberfl{\"a}chendigitalisierung f{\"u}r die flexible Automatisierung bei kleinen Losgr{\"o}ßen},
  series = {Mechatronics \& robotics 2004 : Aachen, Germany, September 13 - 15, 2004 / [IEEE ...]. Drews, Paul [ed.]},
  journal   = {Mechatronics \& robotics 2004 : Aachen, Germany, September 13 - 15, 2004 / [IEEE ...]. Drews, Paul [ed.]},
  publisher = {Eysoldt},
  address   = {Aachen},
  isbn      = {3-938153-30-X},
  pages     = {271 -- 275},
  year      = {2004},
  language  = {de}
}
@article{StarkeKampker1997,
  author    = {Starke, G{\"u}nther and Kampker, M.},
  title     = {Von der Großserienfertigung in die Werkstatt. Der Schl{\"u}ssel f{\"u}r den Robotereinsatz in der Kleinserienfertigung liegt in der Programmierung},
  series = {Produktion, Landsberg. 36 (1997), H. 38},
  journal   = {Produktion, Landsberg. 36 (1997), H. 38},
  isbn      = {0344-6166},
  pages     = {3},
  year      = {1997},
  language  = {de}
}
@article{StarkeKampker1999,
  author    = {Starke, G{\"u}nther and Kampker, M.},
  title     = {Verbesserte Roboterprogrammierung f{\"u}r die werkstattorientierte Fertigung},
  series = {DVS-Berichte. 199 (1999)},
  journal   = {DVS-Berichte. 199 (1999)},
  isbn      = {0418-9639},
  pages     = {84 -- 90},
  year      = {1999},
  language  = {de}
}
@article{StarkeKremerWasmuth1999,
  author    = {Starke, G{\"u}nther and Kremer-Wasmuth, S.},
  title     = {Rechnergest{\"u}tzte Prozeßkontrolle und -dokumentation zur Qualit{\"a}ts{\"u}berwachung beim Schweißen},
  series = {Qualit{\"a}tsorientierte Schweißtechnik als Wettbewerbsfaktor, DVS-Berichte. 196 (1999)},
  journal   = {Qualit{\"a}tsorientierte Schweißtechnik als Wettbewerbsfaktor, DVS-Berichte. 196 (1999)},
  isbn      = {0418-9639},
  pages     = {49 -- 52},
  year      = {1999},
  language  = {de}
}
@article{StarkeKuhneFrassek1984,
  author    = {Starke, G{\"u}nther and Kuhne, A.H. and Frassek, B.},
  title     = {Components for the automated GMAW process. Bestandteile des automatischen Metall-Schutzgas-Schweissverfahrens},
  series = {Welding Journal. 63 (1984), H. 1},
  journal   = {Welding Journal. 63 (1984), H. 1},
  isbn      = {0043-2296},
  pages     = {31 -- 34},
  year      = {1984},
  language  = {en}
}
@inproceedings{StarkeKunkelHahn2013,
  author    = {Starke, G{\"u}nther and Kunkel, Thomas and Hahn, Daniel},
  title     = {Flexible collaboration and control of heterogeneous mechatronic devices and systems by means of an event-driven, SOA-based automation concept},
  series = {2013 IEEE International Conference on Industrial Technologies (ICIT-13)},
  booktitle = {2013 IEEE International Conference on Industrial Technologies (ICIT-13)},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  organization    = {International Conference on Industrial Technologies <2013, Cape Town>},
  isbn      = {978-1-4673-4567-5 ; 978-1-4673-4569-9},
  pages     = {1982 -- 1987},
  year      = {2013},
  language  = {en}
}
@article{StarkePoppen1997,
  author    = {Starke, G{\"u}nther and Poppen, P.},
  title     = {Entwicklung einer modularen Steuerung zum automatisierten, sensorgest{\"u}tzten MAG-Hochleistungsschweißen},
  series = {Schweißen und Schneiden. 49 (1997), H. 3},
  journal   = {Schweißen und Schneiden. 49 (1997), H. 3},
  isbn      = {0036-7184},
  pages     = {149 -- 157},
  year      = {1997},
  language  = {de}
}
@article{StarkeStrunzSpiess1995,
  author    = {Starke, G{\"u}nther and Strunz, U. and Spieß, C.},
  title     = {Schweißprozeßparameteroptimierung mit Fuzzy-Logik},
  series = {Schweißen und Schneiden. 47 (1995), H. 6},
  journal   = {Schweißen und Schneiden. 47 (1995), H. 6},
  isbn      = {0036-7184},
  pages     = {494 -- 503},
  year      = {1995},
  language  = {de}
}
@article{StarkeZackFriedrichetal.2003,
  author    = {Starke, G{\"u}nther and Zack, Y. and Friedrich, A.-P. and Drichel, E.},
  title     = {Simulationswerkzeug bei der Herstellung von mikroelektronischen Komponenten. Schnelles Beurteilen von Alternativen in der Produktionsplanung und im Fertigungsdesign},
  series = {FB/IE - Zeitschrift f{\"u}r Unternehmensentwicklung und Industrial Engineering. 52 (2003), H. 5},
  journal   = {FB/IE - Zeitschrift f{\"u}r Unternehmensentwicklung und Industrial Engineering. 52 (2003), H. 5},
  isbn      = {1431-2271},
  pages     = {204 -- 212},
  year      = {2003},
  language  = {de}
}
@inproceedings{StieglitzWollert2010,
  author    = {Stieglitz, Kristian and Wollert, J{\"o}rg},
  title     = {Database driven modernization and expansion of storage systems},
  series = {Proceedings : the 3rd International Multi-Conference on Engineering and Technological Innovation : June 29th - July 2nd, 2010, Orlando, Florida, USA ; vol. 2},
  booktitle = {Proceedings : the 3rd International Multi-Conference on Engineering and Technological Innovation : June 29th - July 2nd, 2010, Orlando, Florida, USA ; vol. 2},
  publisher = {IIIS},
  address   = {Winter Garden, Fla.},
  organization    = {International Multi-Conference on Engineering and Technological Innovation <3, 2010, Orlando, Fla.>},
  isbn      = {978-1-936338-03-0},
  pages     = {180 -- 183},
  year      = {2010},
  language  = {de}
}
@inproceedings{StieglitzWollert2011,
  author    = {Stieglitz, Kristian and Wollert, J{\"o}rg},
  title     = {Approach of using ultra-wideband-radio in industrial real-time ethernet networks},
  series = {The 4th International Multi-Conference on Engineering and Technological Innovation : IMETI : July 19th - July 22nd, 2011, Orlando, Florida, USA},
  booktitle = {The 4th International Multi-Conference on Engineering and Technological Innovation : IMETI : July 19th - July 22nd, 2011, Orlando, Florida, USA},
  organization    = {International Multi-Conference on Engineering and Technological Innovation <4, 2011, Orlando, Fla.>},
  pages     = {1 -- 6},
  year      = {2011},
  language  = {en}
}
@incollection{Thomas2013,
  author    = {Thomas, Axel},
  title     = {Unternehmertum als Studienfach?!},
  series = {Innovation durch Kooperation : wie der Mittelstand durch Zusammenarbeit mit den Hochschulen seine Wettbewerbsf{\"a}higkeit steigert : Festschrift f{\"u}r Prof. Dr. rer. nat. Johannes Gartzen / Thomas Gartzen, Ute Gartzen (Hrsg.)},
  booktitle = {Innovation durch Kooperation : wie der Mittelstand durch Zusammenarbeit mit den Hochschulen seine Wettbewerbsf{\"a}higkeit steigert : Festschrift f{\"u}r Prof. Dr. rer. nat. Johannes Gartzen / Thomas Gartzen, Ute Gartzen (Hrsg.)},
  publisher = {Apprimus Verlag},
  address   = {Aachen},
  isbn      = {978-3-86359-136-6},
  pages     = {139 -- 144},
  year      = {2013},
  language  = {de}
}
@book{Thomas2010,
  author    = {Thomas, Axel},
  title     = {Rhetorische Knallfr{\"o}sche : Zitatensammlung f{\"u}r Politik und Wirtschaft},
  publisher = {Neck + Heyn},
  address   = {Aachen},
  isbn      = {978-3-00-033037-7},
  pages     = {145 S. : Ill.},
  year      = {2010},
  language  = {de}
}
@book{Thomas2012,
  author    = {Thomas, Axel},
  title     = {Rhetorische Knallfr{\"o}sche - reloaded : Zitatensammlung f{\"u}r Politik und Wirtschaft},
  publisher = {Neck + Heyn},
  address   = {Aachen},
  pages     = {201 S. : Ill.},
  year      = {2012},
  language  = {de}
}
@article{Thomas2014,
  author    = {Thomas, Axel},
  title     = {Generation Y},
  series = {P.T. : Magazin f{\"u}r Wirtschaft und Gesellschaft},
  volume    = {10},
  journal   = {P.T. : Magazin f{\"u}r Wirtschaft und Gesellschaft},
  number    = {3},
  publisher = {OPS Netzwerk},
  address   = {Leipzig},
  issn      = {1860-501X},
  pages     = {6 -- 9},
  year      = {2014},
  language  = {de}
}
@article{Thomas2016,
  author    = {Thomas, Axel},
  title     = {Genussrechte als Instrument der Unternehmensfinanzierung von kommunalen Wohnungs- baugesellschaften},
  series = {VM Verwaltung und Management},
  volume    = {22},
  journal   = {VM Verwaltung und Management},
  number    = {6},
  publisher = {Nomos},
  address   = {Baden-Baden},
  issn      = {0947-9856},
  doi       = {10.5771/0947-9856-2016-6-322},
  pages     = {322 -- 327},
  year      = {2016},
  abstract  = {Die kommunalen Wohnungsbaugesellschaften und ihr Gesch{\"a}ftszweck bzw. Versorgungsauftrag erfahren aus gesamtgesellschaftlichen Gr{\"u}nden aktuell einen erheblichen Bedeutungszuwachs. Der kommunale Wohnungsbau soll und muss intensiviert werden, da z.B. zunehmend Wohnungsbindungen auslaufen. Bezahlbare Neubauten fehlen speziell Familien, Senioren, Studenten und Fl{\"u}chtlingen. Um das Investitionsvolumen zu bew{\"a}ltigen, bedarf es nicht nur der F{\"o}rderkredite, sondern auch der Zuf{\"u}hrung „frischen Kapitals". Der Beitrag stellt dar, dass Genussrechte ein interessantes und oft unbekanntes Finanzierungsinstrument f{\"u}r kommunale Wohnungsbaugesellschaften mit passgenauen Ausgestaltungsm{\"o}glichkeiten sind. Mit Hilfe von Genussrechten k{\"o}nnen die notwendigen Neubau-Investitionen solide mit Quasi-Eigenkapital unterlegt werden und den sozialen Wohnungsbau wiederbeleben. Genussrechte als Hybridkapital lassen sich mangels gesetzlicher Eingrenzung exakt und individuell ebenso an die Bed{\"u}rfnisse der kommunalen Wohnungsbaugesellschaft anpassen wie an die der Gesellschafter und des jeweiligen Neubauvorhabens.},
  language  = {de}
}
@article{Thomas2018,
  author    = {Thomas, Axel},
  title     = {Technologiezentren in der Aachener Region - Retrospektiven und Perspektiven},
  series = {VM Verwaltung und Management},
  volume    = {24},
  journal   = {VM Verwaltung und Management},
  number    = {3},
  publisher = {Nomos},
  address   = {Baden-Baden},
  issn      = {0947-9856},
  doi       = {10.5771/0947-9856-2018-3-147},
  pages     = {147 -- 156},
  year      = {2018},
  language  = {de}
}
@article{Thomas2018,
  author    = {Thomas, Axel},
  title     = {Zielerreichungen der Technologie- und Gr{\"u}nderzentren aus Sicht der kommunalen Finanzwirtschaft - dargestellt am Beispiel der Aachener Region},
  series = {Der Gemeindehaushalt},
  volume    = {119},
  journal   = {Der Gemeindehaushalt},
  number    = {7},
  publisher = {Kohlhammer},
  address   = {Stuttgart},
  issn      = {0340-3645},
  pages     = {149 -- 155},
  year      = {2018},
  language  = {de}
}
@article{Thomas2019,
  author    = {Thomas, Axel},
  title     = {Die Wiederbelebung der Mitarbeiterwohnungsidee bei kommunalen Unternehmen},
  series = {VM Verwaltung und Management},
  volume    = {25},
  journal   = {VM Verwaltung und Management},
  number    = {6},
  publisher = {Nomos-Verl.-Ges.},
  address   = {Baden-Baden},
  issn      = {0947-9856},
  doi       = {10.5771/0947-9856-2019-6-286},
  pages     = {286 -- 291},
  year      = {2019},
  language  = {de}
}
@article{ThomasWassenberg2014,
  author    = {Thomas, Axel and Wassenberg, Gerd},
  title     = {Erfolgreich sein im Kampf um die besten Talente : Employer Branding},
  series = {Wirtschaftliche Nachrichten der Industrie- und Handelskammer Aachen},
  journal   = {Wirtschaftliche Nachrichten der Industrie- und Handelskammer Aachen},
  publisher = {IHK Aachen},
  address   = {Aachen},
  year      = {2014},
  language  = {de}
}
@inproceedings{ThomasWollert2000,
  author    = {Thomas, F. and Wollert, J{\"o}rg},
  title     = {Internet und OO-Systeme in der Logistik},
  series = {Risikofaktor Software : Tagung Mannheim, 21. und 22.November 2000. (VDI-Berichte ; 1577)},
  booktitle = {Risikofaktor Software : Tagung Mannheim, 21. und 22.November 2000. (VDI-Berichte ; 1577)},
  publisher = {VDI-Verl.},
  address   = {H{\"u}thig},
  organization    = {Gesellschaft F{\"o}rdertechnik, Materialfluss und Logistik},
  isbn      = {3180915773},
  pages     = {149 -- 164},
  year      = {2000},
  language  = {de}
}
@inproceedings{ThurnBalcGebhardtetal.2017,
  author    = {Thurn, Laura and Balc, Nicolae and Gebhardt, Andreas and Kessler, Julia},
  title     = {Education packed in technology to promote innovations: Teaching Additive Manufacturing based on a rolling Lab},
  series = {Modern Technologies in Manufacturing (MTeM 2017 - AMaTUC)},
  booktitle = {Modern Technologies in Manufacturing (MTeM 2017 - AMaTUC)},
  issn      = {2261-236X},
  doi       = {10.1051/matecconf/201713702013},
  pages     = {6 Seiten},
  year      = {2017},
  language  = {en}
}
@inproceedings{ThurnGebhardt2017,
  author    = {Thurn, Laura and Gebhardt, Andreas},
  title     = {Arousing Enthusiasm for STEM: Teaching 3D Printing Technology},
  series = {Conference Proceedings: New Perspectives in Science Education},
  booktitle = {Conference Proceedings: New Perspectives in Science Education},
  publisher = {liberiauniversitaria.it},
  address   = {Padua},
  isbn      = {978-88-6292-847-2},
  pages     = {87 -- 92},
  year      = {2017},
  language  = {en}
}
@inproceedings{ThurnGebhardt2018,
  author    = {Thurn, Laura and Gebhardt, Andreas},
  title     = {Strategy of Education on Materials for Students},
  series = {Conference Proceedings: „New Perspectives in Science Education"},
  booktitle = {Conference Proceedings: „New Perspectives in Science Education"},
  address   = {Florence, Italy},
  isbn      = {978-88-6292-976-9},
  pages     = {156 -- 161},
  year      = {2018},
  language  = {en}
}
@misc{TroederBennerAltherretal.1999,
  author    = {Troeder, Christoph and Benner, Joachim and Altherr, Marcel and Schiessl, Helmut F.},
  title     = {Topfspinnvorrichtung : [Offenlegungsschrift]},
  publisher = {Deutsches Patent- und Markenamt ; Weltorganisation f{\"u}r Geistiges Eigentum},
  address   = {M{\"u}nchen ; Genf},
  year      = {1999},
  abstract  = {"The invention relates to a pot spinning device (1) comprising a thread guide (9) which can be moved backwards and forwards and introduced into an opening (8) on the end side of the pot (7) so as to deposit a thread on the inside wall of a spinning pot. In order to improve upon pot spinning devices of this kind, the spinning pot is connected to an electric drive mechanism (10), mounted in magnetic bearings and provided with a gastight housing. Said housing encompasses the spinning pot (7), is open in the area where there is an opening in the end side of the pot and is provided with a seal (19) to seal off the intermediate area (17) between the housing and spinning pot. The housing is also connected to a supply of light-gas via a feed line (18), thereby enabling a light-gas atmosphere to be maintained in the intermediate area."},
  language  = {de}
}
@article{TroederBennerSpielvogeletal.1986,
  author    = {Troeder, Christoph and Benner, Joachim and Spielvogel, A. and Platt, Werner},
  title     = {Expertensystem w{\"a}hlt und dimensioniert drehelastische Kupplungen},
  series = {Technische Rundschau : TR ; das Schweizer Industrie-Magazin},
  volume    = {78},
  journal   = {Technische Rundschau : TR ; das Schweizer Industrie-Magazin},
  number    = {1},
  publisher = {Binkert Medien},
  address   = {Laufenburg},
  issn      = {0040-1498},
  pages     = {92 -- 95},
  year      = {1986},
  language  = {de}
}
@article{UlmerBraunChengetal.2023,
  author    = {Ulmer, Jessica and Braun, Carsten and Cheng, Chi-Tsun and Dowey, Steve and Wollert, J{\"o}rg},
  title     = {A human factors-aware assistance system in manufacturing based on gamification and hardware modularisation},
  series = {International Journal of Production Research},
  journal   = {International Journal of Production Research},
  publisher = {Taylor \& Francis},
  issn      = {0020-7543 (Print)},
  doi       = {10.1080/00207543.2023.2166140},
  year      = {2023},
  abstract  = {Assistance systems have been widely adopted in the manufacturing sector to facilitate various processes and tasks in production environments. However, existing systems are mostly equipped with rigid functional logic and do not provide individual user experiences or adapt to their capabilities. This work integrates human factors in assistance systems by adjusting the hardware and instruction presented to the workers' cognitive and physical demands. A modular system architecture is designed accordingly, which allows a flexible component exchange according to the user and the work task. Gamification, the use of game elements in non-gaming contexts, has been further adopted in this work to provide level-based instructions and personalised feedback. The developed framework is validated by applying it to a manual workstation for industrial assembly routines.},
  language  = {en}
}
@article{UlmerBraunChengetal.2020,
  author    = {Ulmer, Jessica and Braun, Sebastian and Cheng, Chi-Tsun and Dowey, Steve and Wollert, J{\"o}rg},
  title     = {Human-Centered Gamification Framework for Manufacturing Systems},
  series = {Procedia CIRP},
  volume    = {93},
  journal   = {Procedia CIRP},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {2212-8271},
  doi       = {10.1016/j.procir.2020.04.076},
  pages     = {670 -- 675},
  year      = {2020},
  abstract  = {While bringing new opportunities, the Industry 4.0 movement also imposes new challenges to the manufacturing industry and all its stakeholders. In this competitive environment, a skilled and engaged workforce is a key to success. Gamification can generate valuable feedbacks for improving employees' engagement and performance. Currently, Gamification in workspaces focuses on computer-based assignments and training, while tasks that require manual labor are rarely considered. This research provides an overview of Enterprise Gamification approaches and evaluates the challenges. Based on that, a skill-based Gamification framework for manual tasks is proposed, and a case study in the Industry 4.0 model factory is shown.},
  language  = {en}
}
@inproceedings{UlmerBraunChengetal.2021,
  author    = {Ulmer, Jessica and Braun, Sebastian and Cheng, Chi-Tsun and Dowey, Steve and Wollert, J{\"o}rg},
  title     = {Adapting Augmented Reality Systems to the users' needs using Gamification and error solving methods},
  series = {Procedia CIRP},
  volume    = {104},
  booktitle = {Procedia CIRP},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {2212-8271},
  doi       = {10.1016/j.procir.2021.11.024},
  pages     = {140 -- 145},
  year      = {2021},
  abstract  = {Animations of virtual items in AR support systems are typically predefined and lack interactions with dynamic physical environments. AR applications rarely consider users' preferences and do not provide customized spontaneous support under unknown situations. This research focuses on developing adaptive, error-tolerant AR systems based on directed acyclic graphs and error resolving strategies. Using this approach, users will have more freedom of choice during AR supported work, which leads to more efficient workflows. Error correction methods based on CAD models and predefined process data create individual support possibilities. The framework is implemented in the Industry 4.0 model factory at FH Aachen.},
  language  = {en}
}
@inproceedings{UlmerBraunChengetal.2022,
  author    = {Ulmer, Jessica and Braun, Sebastian and Cheng, Chi-Tsun and Dowey, Steve and Wollert, J{\"o}rg},
  title     = {Usage of digital twins for gamification applications in manufacturing},
  series = {Procedia CIRP},
  volume    = {107},
  booktitle = {Procedia CIRP},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {2212-8271},
  doi       = {10.1016/j.procir.2022.05.044},
  pages     = {675 -- 680},
  year      = {2022},
  abstract  = {Gamification applications are on the rise in the manufacturing sector to customize working scenarios, offer user-specific feedback, and provide personalized learning offerings. Commonly, different sensors are integrated into work environments to track workers' actions. Game elements are selected according to the work task and users' preferences. However, implementing gamified workplaces remains challenging as different data sources must be established, evaluated, and connected. Developers often require information from several areas of the companies to offer meaningful gamification strategies for their employees. Moreover, work environments and the associated support systems are usually not flexible enough to adapt to personal needs. Digital twins are one primary possibility to create a uniform data approach that can provide semantic information to gamification applications. Frequently, several digital twins have to interact with each other to provide information about the workplace, the manufacturing process, and the knowledge of the employees. This research aims to create an overview of existing digital twin approaches for digital support systems and presents a concept to use digital twins for gamified support and training systems. The concept is based upon the Reference Architecture Industry 4.0 (RAMI 4.0) and includes information about the whole life cycle of the assets. It is applied to an existing gamified training system and evaluated in the Industry 4.0 model factory by an example of a handle mounting.},
  language  = {en}
}