@inproceedings{ChavezBermudezWollert2022,
  author    = {Chavez Bermudez, Victor Francisco and Wollert, J{\"o}rg},
  title     = {10BASE-T1L industry 4.0 smart switch for field devices based on IO-Link},
  series = {2022 IEEE 18th International Conference on Factory Communication Systems (WFCS)},
  booktitle = {2022 IEEE 18th International Conference on Factory Communication Systems (WFCS)},
  publisher = {IEEE},
  isbn      = {978-1-6654-1086-1},
  doi       = {10.1109/WFCS53837.2022.9779176},
  pages     = {4 Seiten},
  year      = {2022},
  abstract  = {The recent amendment to the Ethernet physical layer known as the IEEE 802.3cg specification, allows to connect devices up to a distance of one kilometer and delivers a maximum of 60 watts of power over a twisted pair of wires. This new standard, also known as 10BASE-TIL, promises to overcome the limits of current physical layers used for field devices and bring them a step closer to Ethernet-based applications. The main advantage of 10BASE- TIL is that it can deliver power and data over the same line over a long distance, where traditional solutions (e.g., CAN, IO-Link, HART) fall short and cannot match its 10 Mbps bandwidth. Due to its recentness, IOBASE- TIL is still not integrated into field devices and it has been less than two years since silicon manufacturers released the first Ethernet-PHY chips. In this paper, we present a design proposal on how field devices could be integrated into a IOBASE-TIL smart switch that allows plug-and-play connectivity for sensors and actuators and is compliant with the Industry 4.0 vision. Instead of presenting a new field-level protocol for this work, we have decided to adopt the IO-Link specification which already includes a plug-and-play approach with features such as diagnosis and device configuration. The main objective of this work is to explore how field devices could be integrated into 10BASE-TIL Ethernet, its adaption with a well-known protocol, and its integration with Industry 4.0 technologies.},
  language  = {en}
}
@inproceedings{PeekenTroederBenneretal.1986,
  author    = {Peeken, Heinz and Troeder, Christoph and Benner, Joachim and Platt, Werner},
  title     = {A new approach to describe the mechanical performance of flexible couplings in drive systems},
  series = {Proceedings of the International Conference on Rotordynamics : September 14 - 17, 1986, Tokyo},
  booktitle = {Proceedings of the International Conference on Rotordynamics : September 14 - 17, 1986, Tokyo},
  publisher = {IFToMM},
  address   = {Tokyo},
  pages     = {159 -- 163},
  year      = {1986},
  language  = {en}
}
@inproceedings{KoenigWolf2016,
  author    = {K{\"o}nig, Johannes Alexander and Wolf, Martin},
  title     = {A new definition of competence developing games - and a framework to assess them},
  series = {ACHI 2016 : The Ninth International Conference on Advances in Computer-Human Interactions},
  booktitle = {ACHI 2016 : The Ninth International Conference on Advances in Computer-Human Interactions},
  isbn      = {978-1-61208-468-8},
  pages     = {95 -- 97},
  year      = {2016},
  abstract  = {There are different types of games that try to make use of the motivation of a gaming situation in learning contexts. This paper introduces the new terminology 'Competence Developing Game' (CDG) as an umbrella term for all games with this intention. Based on this new terminology, an assessment framework has been developed and validated in scope of an empirical study. Now, all different types of CDGs can be evaluated according to a defined and uniform set of assessment criteria and, thus, are comparable according to their characteristics and effectiveness.},
  language  = {en}
}
@inproceedings{EvansBraunUlmeretal.2022,
  author    = {Evans, Benjamin and Braun, Sebastian and Ulmer, Jessica and Wollert, J{\"o}rg},
  title     = {AAS implementations - current problems and solutions},
  series = {20th International Conference on Mechatronics - Mechatronika (ME)},
  booktitle = {20th International Conference on Mechatronics - Mechatronika (ME)},
  publisher = {IEEE},
  isbn      = {978-1-6654-1040-3},
  doi       = {10.1109/ME54704.2022.9982933},
  pages     = {6 Seiten},
  year      = {2022},
  abstract  = {The fourth industrial revolution presents a multitude of challenges for industries, one of which being the increased flexibility required of manufacturing lines as a result of increased consumer demand for individualised products. One solution to tackle this challenge is the digital twin, more specifically the standardised model of a digital twin also known as the asset administration shell. The standardisation of an industry wide communications tool is a critical step in enabling inter-company operations. This paper discusses the current state of asset administration shells, the frameworks used to host them and their problems that need to be addressed. To tackle these issues, we propose an event-based server capable of drastically reducing response times between assets and asset administration shells and a multi-agent system used for the orchestration and deployment of the shells in the field.},
  language  = {en}
}
@inproceedings{BuschkuehleSchuermannWollert2009,
  author    = {Buschk{\"u}hle, Peter and Sch{\"u}rmann, Volker and Wollert, J{\"o}rg},
  title     = {Abstraction of wireless communication by a convergence middleware in conjunction with a XML-configuration},
  series = {Information technology and electrical engineering : devices and systems, materials and technologies for the future ; Ilmenau 07 - 10 September 2009 ; 54. IWK Internationales Wissenschaftliches Kolloquium},
  booktitle = {Information technology and electrical engineering : devices and systems, materials and technologies for the future ; Ilmenau 07 - 10 September 2009 ; 54. IWK Internationales Wissenschaftliches Kolloquium},
  publisher = {Techn. Univ.},
  address   = {Ilmenau},
  isbn      = {978-3-938843-44-4},
  pages     = {95 -- 96},
  year      = {2009},
  language  = {en}
}
@inproceedings{UlmerBraunChengetal.2021,
  author    = {Ulmer, Jessica and Braun, Sebastian and Cheng, Chi-Tsun and Dowey, Steve and Wollert, J{\"o}rg},
  title     = {Adapting Augmented Reality Systems to the users' needs using Gamification and error solving methods},
  series = {Procedia CIRP},
  volume    = {104},
  booktitle = {Procedia CIRP},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {2212-8271},
  doi       = {10.1016/j.procir.2021.11.024},
  pages     = {140 -- 145},
  year      = {2021},
  abstract  = {Animations of virtual items in AR support systems are typically predefined and lack interactions with dynamic physical environments. AR applications rarely consider users' preferences and do not provide customized spontaneous support under unknown situations. This research focuses on developing adaptive, error-tolerant AR systems based on directed acyclic graphs and error resolving strategies. Using this approach, users will have more freedom of choice during AR supported work, which leads to more efficient workflows. Error correction methods based on CAD models and predefined process data create individual support possibilities. The framework is implemented in the Industry 4.0 model factory at FH Aachen.},
  language  = {en}
}
@inproceedings{FateriGebhardtRenftle2015,
  author    = {Fateri, Miranda and Gebhardt, Andreas and Renftle, Georg},
  title     = {Additive manufacturing of drainage segments for cooling system of crucible melting furnaces},
  series = {Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials II, International Symposium on Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials, ICACC 15, 39th International Conference on Advanced Ceramics and Composites, Daytona Beach, FL, US, Jan 25-30, 2015},
  booktitle = {Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials II, International Symposium on Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials, ICACC 15, 39th International Conference on Advanced Ceramics and Composites, Daytona Beach, FL, US, Jan 25-30, 2015},
  publisher = {Wiley},
  address   = {Hoboken},
  issn      = {0196-6219},
  doi       = {10.1002/9781119211662.ch14},
  pages     = {123 -- 131},
  year      = {2015},
  language  = {en}
}
@inproceedings{FateriGebhardtRenftle2015,
  author    = {Fateri, Miranda and Gebhardt, Andreas and Renftle, Georg},
  title     = {Additive Manufacturing of Drainage Segments for Cooling System of Crucibles Melting Furnaces},
  series = {International Conference and Expo on Advanced Ceramics and Composites, (ICACC). January 2015, Florida, USA},
  booktitle = {International Conference and Expo on Advanced Ceramics and Composites, (ICACC). January 2015, Florida, USA},
  pages     = {9 S.},
  year      = {2015},
  abstract  = {The cooling process in induction based crucible melting furnaces for Industrial applications is one of the important and challenging factors in production and safety engineering. Accordingly, proper implementation of the cooling system of the furnace using optimum cooling guides and fail-safe features are critical in order to improve the safety of the process. Regarding this, manufacturing of porous material with high electrical isolation for the drainage segments of the cooling channels is examined in this study. Consequently, various geometries with different porosities using glass and ceramic powder are fabricated using Selective Laser Sintering (SLS) process. The manufactured parts are examined in a prototype furnace testing and the feasibility of the SLS manufacturing of parts for this application is discussed.},
  language  = {en}
}
@inproceedings{FateriGebhardtGabriellietal.2015,
  author    = {Fateri, Miranda and Gebhardt, Andreas and Gabrielli, Roland Antonius and Herdrich, Georg and Fasoulas, Stefanos and Großmann, Agnes and Schnauffer, Peter and Middendorf, Peter},
  title     = {Additive Manufacturing of Lunar Regolith for Extra-terrestrial Industry Plant},
  series = {International Symposium on Space Technology and Science (ICTS). July 2015, Kobe, Japan},
  booktitle = {International Symposium on Space Technology and Science (ICTS). July 2015, Kobe, Japan},
  pages     = {5 S.},
  year      = {2015},
  language  = {en}
}
@inproceedings{GerhardsSchleserOtten2019,
  author    = {Gerhards, Benjamin and Schleser, Markus and Otten, Christian},
  title     = {Advancements of mobile vacuum laser welding for industrial thick sheet applications},
  series = {Conference Proceedings 72nd IIW Annual Assembly and International Conference, 7-12 July 2019, Bratislava},
  booktitle = {Conference Proceedings 72nd IIW Annual Assembly and International Conference, 7-12 July 2019, Bratislava},
  pages     = {1 -- 8},
  year      = {2019},
  language  = {en}
}
@inproceedings{PfaffLarkowskiBurnham2011,
  author    = {Pfaff, Raphael and Larkowski, Tomasz and Burnham, Keith J.},
  title     = {An application of adaptive control in the behavioural framework},
  series = {21st International Conference on Systems Engineering (ICSEng) : 16 - 18 Aug. 2011, Las Vegas, Nevada ; proceedings},
  booktitle = {21st International Conference on Systems Engineering (ICSEng) : 16 - 18 Aug. 2011, Las Vegas, Nevada ; proceedings},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  organization    = {International Conference on Systems Engineering <21, 2011, Las Vegas>},
  isbn      = {978-1-4577-1078-0 ; 978-0-7695-4495-3},
  pages     = {49 -- 54},
  year      = {2011},
  language  = {en}
}
@inproceedings{PfaffLarkowskiBurnham2010,
  author    = {Pfaff, Raphael and Larkowski, Tomasz and Burnham, Keith J.},
  title     = {An approach to adaptive control in the behavioural framework},
  series = {UKACC International Conference on Control 2010 (CONTROL 2010) : Coventry, United Kingdom, 7 - 10 September 2010 ; Vol. 2. (IET seminar digest ; 2010/004)},
  booktitle = {UKACC International Conference on Control 2010 (CONTROL 2010) : Coventry, United Kingdom, 7 - 10 September 2010 ; Vol. 2. (IET seminar digest ; 2010/004)},
  publisher = {Curran},
  address   = {Red Hook, NY},
  organization    = {United Kingdom Automatic Control Council},
  isbn      = {978-1-62748-119-9},
  pages     = {833 -- 838},
  year      = {2010},
  language  = {en}
}
@inproceedings{Pfaff2017,
  author    = {Pfaff, Raphael},
  title     = {Analysis of Big Data Streams to obtain Braking Reliability Information for Train Protection systems},
  series = {Asia-Pacific Conference of the Prognostics and Health Management Society},
  booktitle = {Asia-Pacific Conference of the Prognostics and Health Management Society},
  pages     = {1 -- 7},
  year      = {2017},
  language  = {en}
}
@inproceedings{ReisgenSchleserAbdurakhmanovetal.2012,
  author    = {Reisgen, Uwe and Schleser, Markus and Abdurakhmanov, Aydemir and Gumenyuk, Andrej},
  title     = {Application of electron beam welding to fabrication of steel-aluminium dissimilar joint},
  series = {Beam technologies \& laser application : proceedings of the VII international conference, Saint Petersburg, Sept. 18-21, 2012},
  booktitle = {Beam technologies \& laser application : proceedings of the VII international conference, Saint Petersburg, Sept. 18-21, 2012},
  publisher = {Publ. House},
  address   = {Saint Petersburg},
  pages     = {265 -- 279},
  year      = {2012},
  language  = {en}
}
@inproceedings{DiltheySchleserMoelleretal.2006,
  author    = {Dilthey, Ulrich and Schleser, Markus and M{\"o}ller, M. and Weichhold, O.},
  title     = {Application of polymers in textile reinforced concrete : from the interface to construction elements},
  series = {Textile reinforced concrete : proceedings of the 1. International RILEM Conference, held at the RWTH Aachen, September 6/7, 2006. (RILEM proceedings ; 50)},
  booktitle = {Textile reinforced concrete : proceedings of the 1. International RILEM Conference, held at the RWTH Aachen, September 6/7, 2006. (RILEM proceedings ; 50)},
  editor    = {Hegger, Josef},
  publisher = {RILEM Publ.},
  address   = {Bagneux},
  organization    = {International Conference on Textile Reinforced Concrete <1, 2006, Aachen>},
  isbn      = {2-912143-97-7},
  pages     = {55 -- 64},
  year      = {2006},
  language  = {en}
}
@inproceedings{StieglitzWollert2011,
  author    = {Stieglitz, Kristian and Wollert, J{\"o}rg},
  title     = {Approach of using ultra-wideband-radio in industrial real-time ethernet networks},
  series = {The 4th International Multi-Conference on Engineering and Technological Innovation : IMETI : July 19th - July 22nd, 2011, Orlando, Florida, USA},
  booktitle = {The 4th International Multi-Conference on Engineering and Technological Innovation : IMETI : July 19th - July 22nd, 2011, Orlando, Florida, USA},
  organization    = {International Multi-Conference on Engineering and Technological Innovation <4, 2011, Orlando, Fla.>},
  pages     = {1 -- 6},
  year      = {2011},
  language  = {en}
}
@inproceedings{ChavezBermudezWollert2020,
  author    = {Chavez Bermudez, Victor Francisco and Wollert, J{\"o}rg},
  title     = {Arduino based Framework for Rapid Application Development of a Generic IO-Link interface},
  series = {Kommunikation und Bildverarbeitung in der Automation},
  booktitle = {Kommunikation und Bildverarbeitung in der Automation},
  publisher = {Springer Vieweg},
  address   = {Berlin},
  isbn      = {978-3-662-59895-5},
  doi       = {10.1007/978-3-662-59895-5_2},
  pages     = {21 -- 33},
  year      = {2020},
  abstract  = {The implementation of IO-Link in the automation industry has increased over the years. Its main advantage is it offers a digital point-to-point plugand-play interface for any type of device or application. This simplifies the communication between devices and increases productivity with its different features like self-parametrization and maintenance. However, its complete potential is not always used. The aim of this paper is to create an Arduino based framework for the development of generic IO-Link devices and increase its implementation for rapid prototyping. By generating the IO device description file (IODD) from a graphical user interface, and further customizable options for the device application, the end-user can intuitively develop generic IO-Link devices. The peculiarity of this framework relies on its simplicity and abstraction which allows to implement any sensor functionality and virtually connect any type of device to an IO-Link master. This work consists of the general overview of the framework, the technical background of its development and a proof of concept which demonstrates the workflow for its implementation.},
  language  = {en}
}
@inproceedings{ThurnGebhardt2017,
  author    = {Thurn, Laura and Gebhardt, Andreas},
  title     = {Arousing Enthusiasm for STEM: Teaching 3D Printing Technology},
  series = {Conference Proceedings: New Perspectives in Science Education},
  booktitle = {Conference Proceedings: New Perspectives in Science Education},
  publisher = {liberiauniversitaria.it},
  address   = {Padua},
  isbn      = {978-88-6292-847-2},
  pages     = {87 -- 92},
  year      = {2017},
  language  = {en}
}
@inproceedings{EngemannWiesenKallweitetal.2018,
  author    = {Engemann, Heiko and Wiesen, Patrick and Kallweit, Stephan and Deshpande, Harshavardhan and Schleupen, Josef},
  title     = {Autonomous mobile manipulation using ROS},
  series = {Advances in Service and Industrial Robotics},
  booktitle = {Advances in Service and Industrial Robotics},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-319-61276-8},
  doi       = {10.1007/978-3-319-61276-8_43},
  pages     = {389 -- 401},
  year      = {2018},
  language  = {en}
}
@inproceedings{AbbasThurnKessleretal.2019,
  author    = {Abbas, Karim and Thurn, Laura and Kessler, Julia and Eichler, Fabian},
  title     = {Basic research of the consideration of additive manufactured lattice structures under thermoand fluid dynamic loads},
  series = {Modern technologies in manufacturing (MTeM 2019)},
  volume    = {299},
  booktitle = {Modern technologies in manufacturing (MTeM 2019)},
  number    = {Article 01009},
  doi       = {10.1051/matecconf/201929901009},
  pages     = {8 Seiten},
  year      = {2019},
  language  = {en}
}
@inproceedings{KesslerBalcGebhardtetal.2017,
  author    = {Kessler, Julia and Balc, Nicolae and Gebhardt, Andreas and Abbas, Karim},
  title     = {Basic research on lattice structures focused on the reliance of the cross sectional area and additional coatings},
  series = {The 4th International Conference on Computing and Solutions in Manufacturing Engineering 2016 - CoSME'16},
  booktitle = {The 4th International Conference on Computing and Solutions in Manufacturing Engineering 2016 - CoSME'16},
  edition   = {Vol. 94},
  doi       = {10.1051/matecconf/20179403008},
  pages     = {7 S.},
  year      = {2017},
  language  = {en}
}
@inproceedings{KesslerBalcGebhardt2016,
  author    = {Kessler, Julia and Balc, Nicolae and Gebhardt, Andreas},
  title     = {Basic research on lattice structures focused on the strut shape and welding beads},
  series = {Physics Procedia},
  volume    = {Vol. 83},
  booktitle = {Physics Procedia},
  issn      = {1875-3884},
  doi       = {10.1016/j.phpro.2016.08.086},
  pages     = {833 -- 838},
  year      = {2016},
  language  = {en}
}
@inproceedings{LuftGebhardtBalc2019,
  author    = {Luft, Angela and Gebhardt, Andreas and Balc, Nicolae},
  title     = {Challenges of additive manufacturing in production systems},
  series = {Modern technologies in manufacturing (MTeM 2019)},
  volume    = {299},
  booktitle = {Modern technologies in manufacturing (MTeM 2019)},
  number    = {Article 01003},
  doi       = {10.1051/matecconf/201929901003},
  pages     = {6 Seiten},
  year      = {2019},
  language  = {en}
}
@inproceedings{DiltheySchleser2006,
  author    = {Dilthey, Ulrich and Schleser, Markus},
  title     = {Composite improvement of textile reinforced concrete by polymeric impregnation of the textiles},
  series = {International Symposium Polymers in Concrete : proceedings of ISPIC 2006, 2-4 April 2006 - University of Minho - Guimar{\~a}es, Portugal},
  booktitle = {International Symposium Polymers in Concrete : proceedings of ISPIC 2006, 2-4 April 2006 - University of Minho - Guimar{\~a}es, Portugal},
  editor    = {Barroso de Aguiar, Jose and Jalali, Said and Camoes, Aires and Ferrera, Rui Miguel},
  publisher = {Universidade do Minho, Departamento de Engenharia Civil},
  address   = {Guimar{\~a}es},
  organization    = {International Symposium in Concrete <2006, Guimar{\~a}es)},
  isbn      = {972-99179-1-4},
  pages     = {185 -- 192},
  year      = {2006},
  language  = {en}
}
@inproceedings{PfaffShahidiEnning2017,
  author    = {Pfaff, Raphael and Shahidi, Parham and Enning, Manfred},
  title     = {Connected freight rail rolling stock: a modular approach integrating sensors, actors and cyber physical systems for operational advantages and condition based maintenance},
  series = {Asia-Pacific Conference of the Prognostics and Health Management Society},
  booktitle = {Asia-Pacific Conference of the Prognostics and Health Management Society},
  pages     = {1 -- 7},
  year      = {2017},
  language  = {en}
}
@inproceedings{BeerHaidnWillms1995,
  author    = {Beer, Stefan and Haidn, O.J. and Willms, Herbert},
  title     = {Control of stoichiometric propellant supply in an H2/O2-spinning reserve system},
  series = {Combustion technologies for a clean environment : selected papers from the proceedings of the first international conference, Vilamoura, Portugal, September 3 - 6, 1991. - (Energy, combustion and the environment ;1)},
  booktitle = {Combustion technologies for a clean environment : selected papers from the proceedings of the first international conference, Vilamoura, Portugal, September 3 - 6, 1991. - (Energy, combustion and the environment ;1)},
  editor    = {Carvalho, Maria da Gra{\c{c}}a},
  publisher = {Gordon and Breach},
  address   = {Basel [u.a.]},
  isbn      = {2-88124-619-2},
  pages     = {825 -- 838},
  year      = {1995},
  language  = {en}
}
@inproceedings{WollertPlessmann1993,
  author    = {Wollert, J{\"o}rg and Plessmann, K. W.},
  title     = {Controlling processes by operating-point based hybride observers},
  series = {EUFIT '93 : September 7 - 10, 1993, Eurogress Aachen, Germany, proceedings / First European Congress on Fuzzy and Intelligent Technologies},
  booktitle = {EUFIT '93 : September 7 - 10, 1993, Eurogress Aachen, Germany, proceedings / First European Congress on Fuzzy and Intelligent Technologies},
  publisher = {Verl. d. Augustinus Buchh.},
  address   = {Aachen},
  organization    = {EUFIT <1, 1993, Aachen>},
  isbn      = {3-86073-176-9},
  pages     = {1151 -- 1155},
  year      = {1993},
  language  = {en}
}
@inproceedings{HartmannKallweitFeldusenetal.2012,
  author    = {Hartmann, Axel and Kallweit, Stephan and Feldusen, Antje and Schr{\"o}der, Wolfgang},
  title     = {Detection of upstream propagating sound waves at buffet flow using high-speed PIV},
  pages     = {14 S. : graph. Darst.},
  year      = {2012},
  language  = {en}
}
@inproceedings{SchleupenEngemannBagherietal.2017,
  author    = {Schleupen, Josef and Engemann, Heiko and Bagheri, Mohsen and Kallweit, Stephan and Dahmann, Peter},
  title     = {Developing a climbing maintenance robot for tower and rotor blade service of wind turbines},
  series = {Advances in Robot Design and Intelligent Control : Proceedings of the 25th Conference on Robotics in Alpe-Adria-Danube Region (RAAD16)},
  booktitle = {Advances in Robot Design and Intelligent Control : Proceedings of the 25th Conference on Robotics in Alpe-Adria-Danube Region (RAAD16)},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-319-49058-8},
  doi       = {10.1007/978-3-319-49058-8_34},
  pages     = {310 -- 319},
  year      = {2017},
  language  = {en}
}
@inproceedings{VedralKruseWollert2007,
  author    = {Vedral, Andreas and Kruse, Thomas and Wollert, J{\"o}rg},
  title     = {Development and performance evaluation of an antenna diversity module for industrial communication based on IEEE 802.15.4},
  series = {12th IEEE International Conference on Emerging Technologies and Factory Automation : ETFA 2007 : proceedings : 25-28 Sept. 2007, Patras, Greece},
  booktitle = {12th IEEE International Conference on Emerging Technologies and Factory Automation : ETFA 2007 : proceedings : 25-28 Sept. 2007, Patras, Greece},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  organization    = {International Conference on Emerging Technologies and Factory Automation <12, 2007, Patras, Greece>},
  isbn      = {1424408261 ; 9781424408269},
  doi       = {10.1109/EFTA.2007.4416769},
  pages     = {177 -- 186},
  year      = {2007},
  language  = {en}
}
@inproceedings{UlmerMostafaWollert2022,
  author    = {Ulmer, Jessica and Mostafa, Youssef and Wollert, J{\"o}rg},
  title     = {Digital Twin Academy: From Zero to Hero through individual learning experiences},
  series = {Tagungsband AALE 2022 / Herausgegeben von der Hochschule f{\"u}r Technik, Wirtschaft und Kultur Leipzig},
  booktitle = {Tagungsband AALE 2022 / Herausgegeben von der Hochschule f{\"u}r Technik, Wirtschaft und Kultur Leipzig},
  isbn      = {978-3-910103-00-9},
  doi       = {10.33968/2022.33},
  url       = {http://nbn-resolving.de/urn:nbn:de:bsz:l189-qucosa2-776097},
  pages     = {1 -- 9},
  year      = {2022},
  abstract  = {Digital twins are seen as one of the key technologies of Industry 4.0. Although many research groups focus on digital twins and create meaningful outputs, the technology has not yet reached a broad application in the industry. The main reasons for this imbalance are the complexity of the topic, the lack of specialists, and the unawareness of the twin opportunities. The project "Digital Twin Academy" aims to overcome these barriers by focusing on three actions: Building a digital twin community for discussion and exchange, offering multi-stage training for various knowledge levels, and implementing realworld use cases for deeper insights and guidance. In this work, we focus on creating a flexible learning platform that allows the user to select a training path adjusted to personal knowledge and needs. Therefore, a mix of basic and advanced modules is created and expanded by individual feedback options. The usage of personas supports the selection of the appropriate modules.},
  language  = {en}
}
@inproceedings{ThurnBalcGebhardtetal.2017,
  author    = {Thurn, Laura and Balc, Nicolae and Gebhardt, Andreas and Kessler, Julia},
  title     = {Education packed in technology to promote innovations: Teaching Additive Manufacturing based on a rolling Lab},
  series = {Modern Technologies in Manufacturing (MTeM 2017 - AMaTUC)},
  booktitle = {Modern Technologies in Manufacturing (MTeM 2017 - AMaTUC)},
  issn      = {2261-236X},
  doi       = {10.1051/matecconf/201713702013},
  pages     = {6 Seiten},
  year      = {2017},
  language  = {en}
}
@inproceedings{GoettscheHinschWittwer1992,
  author    = {G{\"o}ttsche, Joachim and Hinsch, Andreas and Wittwer, Volker},
  title     = {Electrochromic and optical properties of mixed WO3-TiO2 thin films produced by sputtering and the sol-gel technique},
  series = {Optical materials technology for energy efficiency and solar energy conversion XI: chromogenics for smart windows : 19 and 21 May 1992, Toulouse-Lab{\`e}ge. (SPIE proceedings series. 1728)},
  booktitle = {Optical materials technology for energy efficiency and solar energy conversion XI: chromogenics for smart windows : 19 and 21 May 1992, Toulouse-Lab{\`e}ge. (SPIE proceedings series. 1728)},
  editor    = {Hugo-Le Goff, Anne},
  publisher = {SPIE},
  address   = {Bellingham, Wash.},
  isbn      = {0-8194-0901-4},
  pages     = {13 -- 25},
  year      = {1992},
  language  = {en}
}
@inproceedings{RaupachOrlowskyBuettneretal.2006,
  author    = {Raupach, Michael and Orlowsky, Jeannette and B{\"u}ttner, T. and Dilthey, Ulrich and Schleser, Markus},
  title     = {Epoxy-impregnated textiles in concrete - load bearing capacity and durability},
  series = {Textile reinforced concrete : proceedings of the 1. International RILEM Conference, held at the RWTH Aachen, September 6/7, 2006. (RILEM proceedings ; 50)},
  booktitle = {Textile reinforced concrete : proceedings of the 1. International RILEM Conference, held at the RWTH Aachen, September 6/7, 2006. (RILEM proceedings ; 50)},
  editor    = {Hegger, Josef},
  publisher = {RILEM Publ.},
  address   = {Bagneux},
  organization    = {International Conference on Textile Reinforced Concrete <1, 2006, Aachen>},
  isbn      = {2-912143-97-7},
  pages     = {77 -- 88},
  year      = {2006},
  language  = {en}
}
@inproceedings{DiltheySchleserChudobaetal.2007,
  author    = {Dilthey, Ulrich and Schleser, Markus and Chudoba, Rostislav and Konrad, Martin},
  title     = {Experimental investigation and micro-mechanical simulaltion of concrete reinforced with epoxy impregnated fabrics},
  series = {Fibre-reinforced polymer reinforcement for concrete structures : proceedings of the 8th international conference : Patras, Greece, July 16- 18, 2007},
  booktitle = {Fibre-reinforced polymer reinforcement for concrete structures : proceedings of the 8th international conference : Patras, Greece, July 16- 18, 2007},
  editor    = {Triantafillou, T. C.},
  publisher = {Univ.},
  address   = {Patras},
  organization    = {International Symposium on Fibre-Reinforced Polymer Reinforcement for Concrete Structures <8, 2007, Patras>},
  isbn      = {9608969107},
  pages     = {456 -- 457},
  year      = {2007},
  language  = {en}
}
@inproceedings{FateriGebhardtKhosravi2013,
  author    = {Fateri, Miranda and Gebhardt, Andreas and Khosravi, Maziar},
  title     = {Experimental investigation of selective laser melting of lunar regolith for in-situ applications},
  series = {ASME 2013 International Mechanical Engineering Congress and Exposition : San Diego, California, USA, November 15-21, 2013. Vol. 2A: Advanced manufacturing},
  booktitle = {ASME 2013 International Mechanical Engineering Congress and Exposition : San Diego, California, USA, November 15-21, 2013. Vol. 2A: Advanced manufacturing},
  publisher = {ASME},
  organization    = {American Society of Mechanical Engineers},
  isbn      = {978-0-7918-5618-5},
  pages     = {V02AT02A008},
  year      = {2013},
  language  = {en}
}
@inproceedings{AdomeitWillms1984,
  author    = {Adomeit, G. and Willms, Herbert},
  title     = {Experimental investigation of the acceleration of deflagration in wake flow},
  series = {Safety of thermal water reactors : proceedings of a Seminar on the Results of the European Communities' Indirect Action Research Programme on Safety of Thermal Water Reactors, held in Brussels, 1-3 October 1984 / Commission of the European Communities},
  booktitle = {Safety of thermal water reactors : proceedings of a Seminar on the Results of the European Communities' Indirect Action Research Programme on Safety of Thermal Water Reactors, held in Brussels, 1-3 October 1984 / Commission of the European Communities},
  editor    = {Skupinski, Edwin},
  publisher = {Graham \& Trotman [u.a.]},
  address   = {London Gaithersburg, Md.},
  isbn      = {0-86010-678-0},
  pages     = {294 -- 304},
  year      = {1984},
  language  = {en}
}
@inproceedings{KilicRaatschenAstanehAsletal.2015,
  author    = {Kilic, S. A. and Raatschen, Hans-J{\"u}rgen and Astaneh-Asl, A. and Apaydin, N. M.},
  title     = {Finite element modeling of the Fatih Sultan Mehmet Suspension Bridge},
  series = {Multi-Span Large Bridges - Proceedings of the International Conference on Multi-Span Large Bridges},
  booktitle = {Multi-Span Large Bridges - Proceedings of the International Conference on Multi-Span Large Bridges},
  publisher = {CRC Press},
  address   = {Leiden},
  isbn      = {9781138027572},
  pages     = {1169 -- 1173},
  year      = {2015},
  language  = {en}
}
@inproceedings{StarkeKunkelHahn2013,
  author    = {Starke, G{\"u}nther and Kunkel, Thomas and Hahn, Daniel},
  title     = {Flexible collaboration and control of heterogeneous mechatronic devices and systems by means of an event-driven, SOA-based automation concept},
  series = {2013 IEEE International Conference on Industrial Technologies (ICIT-13)},
  booktitle = {2013 IEEE International Conference on Industrial Technologies (ICIT-13)},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  organization    = {International Conference on Industrial Technologies <2013, Cape Town>},
  isbn      = {978-1-4673-4567-5 ; 978-1-4673-4569-9},
  pages     = {1982 -- 1987},
  year      = {2013},
  language  = {en}
}
@inproceedings{ChavezBermudezWollert2019,
  author    = {Chavez Bermudez, Victor Francisco and Wollert, J{\"o}rg},
  title     = {Gateway for Automation Controllers and Cloud based Voice Recognition Services},
  series = {KommA, 10. Jahreskolloquium Kommunikation in der Automation},
  booktitle = {KommA, 10. Jahreskolloquium Kommunikation in der Automation},
  publisher = {Institut f{\"u}r Automation und Kommunikation},
  address   = {Magdeburg},
  organization    = {KommA, 2019, Jahreskolloquium Kommunikation in der Automation, 10., Lemgo, DE, 2019-11-20 - 2019-11-21},
  isbn      = {978-3-944722-85-6},
  pages     = {1 -- 8},
  year      = {2019},
  language  = {en}
}
@inproceedings{UlmerBraunLaietal.2019,
  author    = {Ulmer, Jessica and Braun, Sebastian and Lai, Chow Yin and Cheng, Chi-Tsun and Wollert, J{\"o}rg},
  title     = {Generic integration of VR and AR in product lifecycles based on CAD models},
  series = {Proceedings of The 23rd World Multi-Conference on Systemics, Cybernetics and Informatics: WMSCI 2019},
  booktitle = {Proceedings of The 23rd World Multi-Conference on Systemics, Cybernetics and Informatics: WMSCI 2019},
  year      = {2019},
  language  = {en}
}
@inproceedings{PakPiegelerFeldmannetal.2006,
  author    = {Pak, Daniel and Piegeler, D. and Feldmann, Markus and Schleser, Markus and Dilthey, Ulrich},
  title     = {Hybrid joints of textile reinforced concrete parts - designed for assembly},
  series = {Textile reinforced concrete : proceedings of the 1. International RILEM Conference, held at the RWTH Aachen, September 6/7, 2006. (RILEM proceedings ; 50)},
  booktitle = {Textile reinforced concrete : proceedings of the 1. International RILEM Conference, held at the RWTH Aachen, September 6/7, 2006. (RILEM proceedings ; 50)},
  editor    = {Hegger, Josef},
  publisher = {RILEM Publ.},
  address   = {Bagneux},
  organization    = {International Conference on Textile Reinforced Concrete <1, 2006, Aachen>},
  isbn      = {2-912143-97-7},
  pages     = {181 -- 190},
  year      = {2006},
  language  = {en}
}
@inproceedings{EngemannBadriWenningetal.2019,
  author    = {Engemann, Heiko and Badri, Sriram and Wenning, Marius and Kallweit, Stephan},
  title     = {Implementation of an Autonomous Tool Trolley in a Production Line},
  series = {Advances in Service and Industrial Robotics. RAAD 2019. Advances in Intelligent Systems and Computing, vol 980},
  booktitle = {Advances in Service and Industrial Robotics. RAAD 2019. Advances in Intelligent Systems and Computing, vol 980},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-19648-6},
  doi       = {10.1007/978-3-030-19648-6_14},
  pages     = {117 -- 125},
  year      = {2019},
  language  = {en}
}
@inproceedings{ReisgenSchoeneSchleseretal.2009,
  author    = {Reisgen, Uwe and Schoene, Jens and Schleser, Markus and Gries, Thomas and Glowania, Michael},
  title     = {Impregnated textile reinforcements for concrete applications},
  series = {European Coatings Congress : N{\"u}rnberg, Germany, 30.3. - 1.4. 2009},
  booktitle = {European Coatings Congress : N{\"u}rnberg, Germany, 30.3. - 1.4. 2009},
  pages     = {7 S.},
  year      = {2009},
  language  = {en}
}
@inproceedings{SeilerPichlerPfaffetal.2008,
  author    = {Seiler, Friedrich and Pichler, Alexander and Pfaff, Raphael and George, Alfred and Srulijes, Julio},
  title     = {Improved Doppler picture velocimetry and new automated processing},
  series = {14th International Symposium on Applications of Laser Techniques to Fluid Mechanics : Lisbon, Portugal, 7 - 10 July 2008},
  booktitle = {14th International Symposium on Applications of Laser Techniques to Fluid Mechanics : Lisbon, Portugal, 7 - 10 July 2008},
  organization    = {International Symposium on Applications of Laser Techniques to Fluid Mechanics <14, 2008, Lisboa>},
  pages     = {1 -- 12},
  year      = {2008},
  language  = {en}
}
@inproceedings{DiltheyMundRaupachetal.2004,
  author    = {Dilthey, Ulrich and Mund, F. and Raupach, Michael and Schleser, Markus and Walk-Lauffer, Bernd},
  title     = {Improvement of textile reinforced concrete by polymer additives},
  series = {ICPIC '04 : 11th International Congress on Polymers in Concrete : 2nd-4th June, 2004 at BAM, Berlin, Germany : proceedings / ed. by M. Maultzsch},
  booktitle = {ICPIC '04 : 11th International Congress on Polymers in Concrete : 2nd-4th June, 2004 at BAM, Berlin, Germany : proceedings / ed. by M. Maultzsch},
  publisher = {BAM},
  address   = {Berlin},
  isbn      = {3-00-013706-8},
  pages     = {469 -- 476},
  year      = {2004},
  language  = {en}
}
@inproceedings{SchleserDiltheyMundetal.2007,
  author    = {Schleser, Markus and Dilthey, Ulrich and Mund, F. and B{\"o}hm, Stefan},
  title     = {Improvement of textile reinforced concrete by use of polymers},
  series = {Adhesion in interfaces of building materials: a multi-scale approach : [Symposium "Adhesion in Building Bonds: Macro-, Micro- and Nano-Scale" at Warsaw University of Technology in the framework of the European Materials Research Society, fall meeting 2005 ; selected papers]. (Advances in materials science and restoration. No. 2)},
  booktitle = {Adhesion in interfaces of building materials: a multi-scale approach : [Symposium "Adhesion in Building Bonds: Macro-, Micro- and Nano-Scale" at Warsaw University of Technology in the framework of the European Materials Research Society, fall meeting 2005 ; selected papers]. (Advances in materials science and restoration. No. 2)},
  editor    = {Czarnecki, Lech and Garbacz, Andrzej},
  publisher = {Aedificatio Publ.},
  address   = {Freiburg},
  isbn      = {978-3-931681-89-0},
  pages     = {153 -- 162},
  year      = {2007},
  language  = {en}
}
@inproceedings{AlhwarinFerreinGebhardtetal.2015,
  author    = {Alhwarin, Faraj and Ferrein, Alexander and Gebhardt, Andreas and Kallweit, Stephan and Scholl, Ingrid and Tedjasukmana, Osmond Sanjaya},
  title     = {Improving additive manufacturing by image processing and robotic milling},
  series = {2015 IEEE International Conference on Automation Science and Engineering (CASE), Aug 24-28, 2015 Gothenburg, Sweden},
  booktitle = {2015 IEEE International Conference on Automation Science and Engineering (CASE), Aug 24-28, 2015 Gothenburg, Sweden},
  doi       = {10.1109/CoASE.2015.7294217},
  pages     = {924 -- 929},
  year      = {2015},
  language  = {en}
}
@inproceedings{GerhardsSchleserOttenetal.2019,
  author    = {Gerhards, Benjamin and Schleser, Markus and Otten,, Christian and Schwarz, Alexander and Gebhardt, Andreas},
  title     = {Innovative Laser Beam Joining Technology for Additive Manufactured Parts},
  series = {Conference Proceedings 72nd IIW Annual Assembly and International Conference, 7-12 July 2019, Bratislava},
  booktitle = {Conference Proceedings 72nd IIW Annual Assembly and International Conference, 7-12 July 2019, Bratislava},
  pages     = {1 -- 8},
  year      = {2019},
  language  = {en}
}
@inproceedings{KolkmannGriesSchleseretal.2005,
  author    = {Kolkmann, Annette and Gries, Thomas and Schleser, Markus and Dilthey, Ulrich},
  title     = {Innovative yarn structures and coatings for textile reinforced concrete},
  series = {All lectures / Techtextil Symposium : 6. - 9. 6.2005, Frankfurt am Main},
  booktitle = {All lectures / Techtextil Symposium : 6. - 9. 6.2005, Frankfurt am Main},
  address   = {Frankfurt a.M.},
  pages     = {1 CD-ROM},
  year      = {2005},
  language  = {en}
}
@inproceedings{SchuermannMannBudaetal.2009,
  author    = {Sch{\"u}rmann, Volker and Mann, Thorsten and Buda, Aurel and Wollert, J{\"o}rg},
  title     = {Integrating bluetooth localization into existing TCP/IP networks},
  series = {IEEE International Workshop on Intelligent Data Acquisition and Advanced Computing Systems: Technology and Applications, 2009 : IDAACS 2009 ; Rende, Cosenza, Italy, 21 - 23 Sept. 2009},
  booktitle = {IEEE International Workshop on Intelligent Data Acquisition and Advanced Computing Systems: Technology and Applications, 2009 : IDAACS 2009 ; Rende, Cosenza, Italy, 21 - 23 Sept. 2009},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  organization    = {International Workshop on Intelligent Data Acquisition and Advanced Computing Systems <5, 2009, Rende, Cosenza, Italy>},
  isbn      = {978-1-4244-4882-1 ; ISBN: 978-1-4244-4901-9},
  doi       = {10.1109/IDAACS.2009.5342903},
  pages     = {621 -- 624},
  year      = {2009},
  language  = {en}
}
@inproceedings{SchuermannKellerWollert2009,
  author    = {Sch{\"u}rmann, Volker and Keller, Alex and Wollert, J{\"o}rg},
  title     = {Internet based middleware approach for building services},
  series = {Proceedings / IMETI 2009, the 2nd International Multi-Conference on Engineering and Technological Innovation : July 10 - 13, 2009 Orlando, Florida, USA ; vol. 1},
  booktitle = {Proceedings / IMETI 2009, the 2nd International Multi-Conference on Engineering and Technological Innovation : July 10 - 13, 2009 Orlando, Florida, USA ; vol. 1},
  publisher = {IIIS},
  address   = {Winter Garden, Fla.},
  organization    = {International Multi-Conference on Engineering and Technological Innovation <2, 2009, Orlando, Fla.>},
  isbn      = {1-934272-68-X ; 978-1-934272-68-8},
  pages     = {30 -- 34},
  year      = {2009},
  language  = {en}
}
@inproceedings{DiltheySchleserPuterman2007,
  author    = {Dilthey, Ulrich and Schleser, Markus and Puterman, Moshe},
  title     = {Investigation and improvement of concrete reinforced with epoxy impregnated fabrics},
  series = {Proceedings / 12th International Congress Polymers in Concrete, ICPIC 07, chuncheon, Korea, Sept. 26. - 28., 2007},
  booktitle = {Proceedings / 12th International Congress Polymers in Concrete, ICPIC 07, chuncheon, Korea, Sept. 26. - 28., 2007},
  publisher = {Kangwoon National Univ.},
  address   = {Chancheon},
  isbn      = {978-89-9600450-9},
  pages     = {725 -- 733},
  year      = {2007},
  language  = {en}
}
@inproceedings{ReisgenSchleserAbdurakhmanovetal.2011,
  author    = {Reisgen, Uwe and Schleser, Markus and Abdurakhmanov, Aydemir and Turichin, Gleb and Valdaitseva, Elena and Bach, Friedrich-Wilhelm and Hassel, Thomas and Beniyashi, Alexander},
  title     = {Investigation of factors for defect-free weld formation by non-vacuum electron beam welding},
  series = {Laser technologies in welding and materials processing : proceedings of the fifth international conference, 24 - 27 May 2011, Katsiveli, Crimea, Ukraine},
  booktitle = {Laser technologies in welding and materials processing : proceedings of the fifth international conference, 24 - 27 May 2011, Katsiveli, Crimea, Ukraine},
  publisher = {Paton Publ. House},
  address   = {Kiev},
  pages     = {104 -- 109},
  year      = {2011},
  language  = {en}
}
@inproceedings{HuberBleckScheiketal.2011,
  author    = {Huber, Fr{\´e}d{\´e}ric and Bleck, Wolfgang and Scheik, Sven and Schleser, Markus and Reisgen, Uwe},
  title     = {Investigation of galvanneal coating adherence in adhesive bonded joints using lap shear test},
  series = {Galvatech 2011 : 8th International Conference on Zinc and Zinc Alloy Coated Steel Sheet, June 21 - 24, 2011, Genova (Italy) ; proceedings},
  booktitle = {Galvatech 2011 : 8th International Conference on Zinc and Zinc Alloy Coated Steel Sheet, June 21 - 24, 2011, Genova (Italy) ; proceedings},
  publisher = {Associazione Italiana di Metallurgia},
  address   = {Mailand},
  organization    = {International Conference on Zinc and Zinc Alloy Coated Steel Sheet <8, 2011, Genua>},
  isbn      = {978-88-85298-82-8},
  pages     = {Paper No. 43},
  year      = {2011},
  language  = {en}
}
@inproceedings{ReisgenSchleserSchoeneetal.2012,
  author    = {Reisgen, Uwe and Schleser, Markus and Schoene, Jens and Hegger, Josef and Gallwoszus, J{\"o}rg and Feldmann, Markus and Kopp, Maik and G{\"u}ndel, Max},
  title     = {Investigation on bond mechanisms of innovative small-scale shear connectors between steel and concrete},
  series = {Bond in concrete 2012. Vol. 2. Bond in new materials and under severe conditions},
  booktitle = {Bond in concrete 2012. Vol. 2. Bond in new materials and under severe conditions},
  editor    = {Cairns, John W.},
  publisher = {Publisher creations},
  address   = {Manerbio, Brescia},
  isbn      = {978-88-907078-3-4},
  pages     = {893 -- 898},
  year      = {2012},
  language  = {en}
}
@inproceedings{WeissHeslenfeldSaeweetal.2022,
  author    = {Weiss, Christian and Heslenfeld, Jonas and Saewe, Jasmin Kathrin and Bremen, Sebastian and H{\"a}fner, Constantin Leon},
  title     = {Investigation on the influence of powder humidity in Laser Powder Bed Fusion (LPBF)},
  series = {Procedia CIRP},
  volume    = {111},
  booktitle = {Procedia CIRP},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {2212-8271},
  doi       = {10.1016/j.procir.2022.08.102},
  pages     = {115 -- 120},
  year      = {2022},
  abstract  = {In the Laser Powder Bed Fusion (LPBF) process, parts are built out of metal powder material by exposure of a laser beam. During handling operations of the powder material, several influencing factors can affect the properties of the powder material and therefore directly influence the processability during manufacturing. Contamination by moisture due to handling operations is one of the most critical aspects of powder quality. In order to investigate the influences of powder humidity on LPBF processing, four materials (AlSi10Mg, Ti6Al4V, 316L and IN718) are chosen for this study. The powder material is artificially humidified, subsequently characterized, manufactured into cubic samples in a miniaturized process chamber and analyzed for their relative density. The results indicate that the processability and reproducibility of parts made of AlSi10Mg and Ti6Al4V are susceptible to humidity, while IN718 and 316L are barely influenced.},
  language  = {en}
}
@inproceedings{FateriGebhardt2014,
  author    = {Fateri, Miranda and Gebhardt, Andreas},
  title     = {Jewelry fabrication via selective laser melting of glass},
  series = {ASME 2014 12th Biennial Conference on Engineering Systems Design and Analysis Volume 1: Applied Mechanics; Automotive Systems; Biomedical Biotechnology Engineering; Computational Mechanics; Design; Digital Manufacturing; Education; Marine and Aerospace Applications},
  booktitle = {ASME 2014 12th Biennial Conference on Engineering Systems Design and Analysis Volume 1: Applied Mechanics; Automotive Systems; Biomedical Biotechnology Engineering; Computational Mechanics; Design; Digital Manufacturing; Education; Marine and Aerospace Applications},
  isbn      = {978-0-7918-4583-7},
  doi       = {10.1115/ESDA2014-20380},
  pages     = {V001T06A005},
  year      = {2014},
  abstract  = {Selective Laser Melting (SLM) is one of the Additive Manufacturing (AM) technologies applicable for producing complex geometries which are typically expensive or difficult to fabricate using conventional methods. This process has been extensively investigated experimentally for various metals and the fabrication process parameters have been established for different applications; however, fabricating 3D glass objects using SLM technology has remained a challenge so far although it could have many applications. This paper presents a summery on various experimental evaluations of a material database incorporating the build parameters of glass powder using the SLM process for jewelry applications.},
  language  = {en}
}
@inproceedings{WiesenEngemannLimpertetal.2018,
  author    = {Wiesen, Patrick and Engemann, Heiko and Limpert, Nicolas and Kallweit, Stephan},
  title     = {Learning by Doing - Mobile Robotics in the FH Aachen ROS Summer School},
  series = {European Robotics Forum 2018, TRROS18 Workshop},
  booktitle = {European Robotics Forum 2018, TRROS18 Workshop},
  pages     = {47 -- 58},
  year      = {2018},
  language  = {en}
}
@inproceedings{FerreinKallweitScholletal.2015,
  author    = {Ferrein, Alexander and Kallweit, Stephan and Scholl, Ingrid and Reichert, Walter},
  title     = {Learning to Program Mobile Robots in the ROS Summer School Series},
  series = {Proceedings 6th International Conference on Robotics in Education (RiE 15)},
  booktitle = {Proceedings 6th International Conference on Robotics in Education (RiE 15)},
  pages     = {6 S.},
  year      = {2015},
  abstract  = {The main objective of our ROS Summer School series is to introduce MA level students to program mobile robots with the Robot Operating System (ROS). ROS is a robot middleware that is used my many research institutions world-wide. Therefore, many state-of-the-art algorithms of mobile robotics are available in ROS and can be deployed very easily. As a basic robot platform we deploy a 1/10 RC cart that is wquipped with an Arduino micro-controller to control the servo motors, and an embedded PC that runs ROS. In two weeks, participants get to learn the basics of mobile robotics hands-on. We describe our teaching concepts and our curriculum and report on the learning success of our students.},
  language  = {en}
}
@inproceedings{DiltheySchleserHeggeretal.2007,
  author    = {Dilthey, Ulrich and Schleser, Markus and Hegger, Josef and Voss, Stefan},
  title     = {Load-bearing behaviour of polymer-impregnated textiles in concrete},
  series = {Fifth International Workshop on High Performance Fiber Reinforced Cement Composites (HPFRCC 5) : Mainz, July 10 - 13, 2007. (RILEM proceedings. 53)},
  booktitle = {Fifth International Workshop on High Performance Fiber Reinforced Cement Composites (HPFRCC 5) : Mainz, July 10 - 13, 2007. (RILEM proceedings. 53)},
  editor    = {Reinhardt, Hans W.},
  publisher = {RILEM Publ.},
  address   = {Bagneux},
  organization    = {International Workshop on High Performance Fiber Reinforced Cement Composites <5, 2007, Mainz>},
  isbn      = {978-2-35158-046-2},
  pages     = {183 -- 192},
  year      = {2007},
  language  = {en}
}
@inproceedings{ReisgenSchleserAbdurakhmanovetal.2009,
  author    = {Reisgen, Uwe and Schleser, Markus and Abdurakhmanov, Aydemir and Gumenyuk, Amdrej V.},
  title     = {Measurement method of electron beam plasma parameters by non-vacuum electron beam welding},
  series = {Beam technologies \& laser application : proceedings of the VI international conference, Saint Petersburg, Sept. 23-25, 2009},
  booktitle = {Beam technologies \& laser application : proceedings of the VI international conference, Saint Petersburg, Sept. 23-25, 2009},
  editor    = {Turichin, G.},
  publisher = {Politechnical Univ.},
  address   = {Saint Petersburg},
  organization    = {Russian Academy of Science},
  pages     = {259 -- 267},
  year      = {2009},
  language  = {en}
}
@inproceedings{DannenSchindelePruemmeretal.2022,
  author    = {Dannen, Tammo and Schindele, Benedikt and Pr{\"u}mmer, Marcel and Arntz, Kristian and Bergs, Thomas},
  title     = {Methodology for the self-optimizing determination of additive manufacturing process eligibility and optimization potentials in toolmaking},
  series = {Procedia CIRP},
  volume    = {107},
  booktitle = {Procedia CIRP},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {2212-8271},
  doi       = {10.1016/j.procir.2022.05.188},
  pages     = {1539 -- 1544},
  year      = {2022},
  abstract  = {Additive Manufacturing (AM) of metallic workpieces faces a continuously rising technological relevance and market size. Producing complex or highly strained unique workpieces is a significant field of application, making AM highly relevant for tool components. Its successful economic application requires systematic workpiece based decisions and optimizations. Considering geometric and technological requirements as well as the necessary post-processing makes deciding effortful and requires in-depth knowledge. As design is usually adjusted to established manufacturing, associated technological and strategic potentials are often neglected. To embed AM in a future proof industrial environment, software-based self-learning tools are necessary. Integrated into production planning, they enable companies to unlock the potentials of AM efficiently. This paper presents an appropriate methodology for the analysis of process-specific AM-eligibility and optimization potential, added up by concrete optimization proposals. For an integrated workpiece characterization, proven methods are enlarged by tooling-specific figures. The first stage of the approach specifies the model's initialization. A learning set of tooling components is described using the developed key figure system. Based on this, a set of applicable rules for workpiece-specific result determination is generated through clustering and expert evaluation. Within the following application stage, strategic orientation is quantified and workpieces of interest are described using the developed key figures. Subsequently, the retrieved information is used for automatically generating specific recommendations relying on the generated ruleset of stage one. Finally, actual experiences regarding the recommendations are gathered within stage three. Statistic learning transfers those to the generated ruleset leading to a continuously deepening knowledge base. This process enables a steady improvement in output quality.},
  language  = {en}
}
@inproceedings{BraunChengLaietal.2019,
  author    = {Braun, Sebastian and Cheng, Chi-Tsun and Lai, Chow Yin and Wollert, J{\"o}rg},
  title     = {Microservice Architecture for Automation - Realization by the example of a model-factory's manufacturing execution system},
  series = {Proceedings of the 23rd World Multi-Conference on Systemics, Cybernetics and Informatics: WMSCI 2019},
  booktitle = {Proceedings of the 23rd World Multi-Conference on Systemics, Cybernetics and Informatics: WMSCI 2019},
  pages     = {33 -- 37},
  year      = {2019},
  language  = {en}
}
@inproceedings{BudaJozenfiniWollert2007,
  author    = {Buda, Aurel and Jozenfini, B. and Wollert, J{\"o}rg},
  title     = {Mobile ad-hoc Network for home automation based on ZigBee application framework},
  series = {1st European ZigBee Developer's Conference : June 18 - 20, 2007, Munich, Germany},
  booktitle = {1st European ZigBee Developer's Conference : June 18 - 20, 2007, Munich, Germany},
  publisher = {Design \& Elektronik},
  address   = {Poing},
  organization    = {European ZigBee Developer's Conference <1, 2007, M{\"u}nchen>},
  pages     = {1 -- 5},
  year      = {2007},
  language  = {en}
}
@inproceedings{PfaffPichlerGeorgeetal.2007,
  author    = {Pfaff, Raphael and Pichler, Alexander and George, Alfred and Seiler, Friedrich},
  title     = {Model based image processing for flow visualisation : 16th International Conference on Systems Science, Wroclaw, Poland, September 04 - 06, 2007},
  series = {PU / Institut Franco-Allemand de Recherches de Saint-Louis ; 2007, 620},
  booktitle = {PU / Institut Franco-Allemand de Recherches de Saint-Louis ; 2007, 620},
  publisher = {ISL},
  address   = {Saint Louis, France},
  organization    = {International Conference on Systems Science <16, 2007, Wroclaw>},
  pages     = {1 -- 10},
  year      = {2007},
  language  = {en}
}
@inproceedings{GaoBabilonPfaffetal.2018,
  author    = {Gao, H. and Babilon, Katharina and Pfaff, Raphael and Gan, F. and Reich, A.},
  title     = {Model of wheel-rail contact for sanding and adhesion enhancement},
  series = {Proceedings of the 11th International Conference on Contact Mechanics and Wear of Rail/wheel Systems, CM 2018},
  booktitle = {Proceedings of the 11th International Conference on Contact Mechanics and Wear of Rail/wheel Systems, CM 2018},
  isbn      = {978-946186963-0},
  pages     = {314 -- 321},
  year      = {2018},
  language  = {en}
}
@inproceedings{PfaffMoshiriReichetal.2017,
  author    = {Pfaff, Raphael and Moshiri, Amir and Reich, Alexander and G{\"a}bel, Markus},
  title     = {Modelling of the effect of sanding on the wheel-rail adhesion area},
  series = {First International Conference on Rail Transportation},
  booktitle = {First International Conference on Rail Transportation},
  pages     = {1 -- 7},
  year      = {2017},
  language  = {en}
}
@inproceedings{PfaffVinsonneauBurnham2006,
  author    = {Pfaff, Raphael and Vinsonneau, B. and Burnham, K. J.},
  title     = {Multiple models for nonlinear systems},
  series = {Proceedings / Eigteenth International Conference on Systems Engineering : ICSE 2006 : 5 - 7 September 2006 ; [held at Coventry University, UK]},
  booktitle = {Proceedings / Eigteenth International Conference on Systems Engineering : ICSE 2006 : 5 - 7 September 2006 ; [held at Coventry University, UK]},
  organization    = {International Conference on Systems Engineering <18, 2006, Coventry>},
  isbn      = {1-84600-013-0},
  pages     = {347 -- 352},
  year      = {2006},
  language  = {en}
}
@inproceedings{ReisgenSchleserScheiketal.2011,
  author    = {Reisgen, Uwe and Schleser, Markus and Scheik, Sven and Michaeli, Walter and Gr{\"o}nlund, Oliver and Neuß, Andreas and Wunderle, Johannes and Poprawe, Reinhart and R{\"o}sner, A. and Bobzin, Kirsten and Schl{\"a}fer, Thomas and Theiß, Sebastian and Kutschmann, Pia and Haberstroh, Edmund and Flock, Dustin and B{\"u}hrig-Polaczek, Andreas and Jakob, M.},
  title     = {Novel process chains for the production of plastics/metal-hybrids},
  series = {17th International Conference on Concurrent Enterprising (ICE 2011) : Aachen, Germany, 20 - 22 June 2011},
  booktitle = {17th International Conference on Concurrent Enterprising (ICE 2011) : Aachen, Germany, 20 - 22 June 2011},
  editor    = {Thoben, Klaus-Dieter},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  organization    = {Forschungsinstitut f{\"u}r Rationalisierung <Aachen> ; International Conference on Concurrent Enterprising <17, 2011, Aachen>},
  isbn      = {978-1-457-70772-8 ; 978-3-943024-05-0},
  pages     = {596 -- 604},
  year      = {2011},
  language  = {en}
}
@inproceedings{PfaffBurnham2008,
  author    = {Pfaff, Raphael and Burnham, Keith J.},
  title     = {On abstraction and interpretability: a behavioural perspective},
  series = {19th International Conference on Systems Engineering 2008 : ICSENG '08 : 19 - 21 Aug. 2008, University of Nevada, Las Vegas, Nevada},
  booktitle = {19th International Conference on Systems Engineering 2008 : ICSENG '08 : 19 - 21 Aug. 2008, University of Nevada, Las Vegas, Nevada},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  organization    = {International Conference on Systems Engineering <19, 2008, Las Vegas, Nev.>},
  isbn      = {978-0-7695-3331-5 ; 978-0-7695-2719-2},
  pages     = {89 -- 94},
  year      = {2008},
  language  = {en}
}
@inproceedings{EichlerSkupinThurnetal.2019,
  author    = {Eichler, Fabian and Skupin, Marco and Thurn, Laura and Kasch, Susanne and Schmidt, Thomas},
  title     = {Operating limits for beam melting of glass materials},
  series = {Modern Technologies in Manufacturing (MTeM 2019)},
  volume    = {299},
  booktitle = {Modern Technologies in Manufacturing (MTeM 2019)},
  number    = {Article 01004},
  doi       = {10.1051/matecconf/201929901004},
  pages     = {8 Seiten},
  year      = {2019},
  abstract  = {Laser-based Additive Manufacturing (AM) processes for the use of metals out of the powder bed have been investigated profusely and are prevalent in industry. Although there is a broad field of application, Laser Powder Bed Fusion (LPBF), also known as Selective Laser Melting (SLM) of glass is not fully developed yet. The material properties of glass are significantly different from the investigated metallic material for LPBF so far. As such, the process cannot be transferred, and the parameter limits and the process sequence must be redefined for glass. Starting with the characterization of glass powders, a parameter field is initially confined to investigate the process parameter of different glass powder using LPBFprocess. A feasibility study is carried out to process borosilicate glass powder. The effects of process parameters on the dimensional accuracy of fabricated parts out of borosilicate and hints for the post-processing are analysed and presented in this paper.},
  language  = {en}
}
@inproceedings{GrossmannGabrielliHerdrichetal.2015,
  author    = {Großmann, Agnes and Gabrielli, Roland Antonius and Herdrich, Georg and Fasoulas, Stefanos and Schnauffer, Peter and Middendorf, Peter and Fateri, Miranda and Gebhardt, Andreas},
  title     = {Overview of the MultiRob 3D Lunar Industrial Development Project},
  series = {Conference Contribution for the 30th ISTS, Kobe, Japan, 04.07.-10.07.2015},
  booktitle = {Conference Contribution for the 30th ISTS, Kobe, Japan, 04.07.-10.07.2015},
  pages     = {8 S.},
  year      = {2015},
  language  = {en}
}
@inproceedings{ChudobaKonradSchleseretal.2009,
  author    = {Chudoba, Rostislav and Konrad, Martin and Schleser, Markus and Meskouris, Konstantin and Reisgen, Uwe},
  title     = {Parametric study of tensile response of TRC specimens reinforced with epoxy-penetrated multi-filament yarns},
  series = {Textilbeton - Theorie und Praxis : Tagungsband zum 4. Kolloquium zu textilbewehrten Tragwerken (CTRS4) und zur 1. Anwendertagung, Dresden, 3.6.2009 - 5.6.2009},
  booktitle = {Textilbeton - Theorie und Praxis : Tagungsband zum 4. Kolloquium zu textilbewehrten Tragwerken (CTRS4) und zur 1. Anwendertagung, Dresden, 3.6.2009 - 5.6.2009},
  editor    = {Curbach, Manfred},
  publisher = {Techn. Univ.},
  address   = {Dresden},
  isbn      = {978-3-86780-122-5},
  pages     = {87 -- 98},
  year      = {2009},
  language  = {en}
}
@inproceedings{KleineKallweitMichauxetal.2016,
  author    = {Kleine, Harald and Kallweit, Stephan and Michaux, Frank and Havermann, Marc and Olivier, Herbert},
  title     = {PIV Measurement of Shock Wave Diffraction},
  series = {18th International Symposium on Applications of Laser Techniques to Fluid Mechanics, 2016, Lissabon},
  booktitle = {18th International Symposium on Applications of Laser Techniques to Fluid Mechanics, 2016, Lissabon},
  pages     = {1 -- 14},
  year      = {2016},
  language  = {en}
}
@inproceedings{RieperGebhardtStucker2016,
  author    = {Rieper, Harald and Gebhardt, Andreas and Stucker, Brent},
  title     = {Process parameters for Selective Laser Melting of AgCu7},
  series = {DDMC, Fraunhofer Direct Digital Manufacturing Conference, 3},
  booktitle = {DDMC, Fraunhofer Direct Digital Manufacturing Conference, 3},
  publisher = {Fraunhofer-Verlag},
  address   = {Stuttgart},
  isbn      = {978-3-8396-1001-5},
  pages     = {171 -- 176},
  year      = {2016},
  language  = {en}
}
@inproceedings{SchmidtKaschEichleretal.2021,
  author    = {Schmidt, Thomas and Kasch, Susanne and Eichler, Fabian and Thurn, Laura},
  title     = {Process strategies on laser-based melting of glass powder},
  series = {Lasers in Manufacturing Conference 2021},
  booktitle = {Lasers in Manufacturing Conference 2021},
  pages     = {10 Seiten},
  year      = {2021},
  abstract  = {This paper presents the laser-based powder bed fusion (L-PBF) using various glass powders (borosilicate and quartz glass). Compared to metals, these require adapted process strategies. First, the glass powders were characterized with regard to their material properties and their processability in the powder bed. This was followed by investigations of the melting behavior of the glass powders with different laser wavelengths (10.6 µm, 1070 nm). In particular, the experimental setup of a CO2 laser was adapted for the processing of glass powder. An experimental setup with integrated coaxial temperature measurement/control and an inductively heatable build platform was created. This allowed the L-PBF process to be carried out at the transformation temperature of the glasses. Furthermore, the component's material quality was analyzed on three-dimensional test specimen with regard to porosity, roughness, density and geometrical accuracy in order to evaluate the developed L-PBF parameters and to open up possible applications.},
  language  = {en}
}
@inproceedings{ChavezBermudezCruzCastanonRuchayetal.2022,
  author    = {Chavez Bermudez, Victor Francisco and Cruz Castanon, Victor Fernando and Ruchay, Marco and Wollert, J{\"o}rg},
  title     = {Rapid prototyping framework for automation applications based on IO-Link},
  series = {Tagungsband AALE 2022},
  booktitle = {Tagungsband AALE 2022},
  editor    = {Leipzig, Hochschule f{\"u}r Technik, Wirtschaft und Kultur},
  address   = {Leipzig},
  isbn      = {978-3-910103-00-9},
  doi       = {10.33968/2022.28},
  pages     = {8 Seiten},
  year      = {2022},
  abstract  = {The development of protype applications with sensors and actuators in the automation industry requires tools that are independent of manufacturer, and are flexible enough to be modified or extended for any specific requirements. Currently, developing prototypes with industrial sensors and actuators is not straightforward. First of all, the exchange of information depends on the industrial protocol that these devices have. Second, a specific configuration and installation is done based on the hardware that is used, such as automation controllers or industrial gateways. This means that the development for a specific industrial protocol, highly depends on the hardware and the software that vendors provide. In this work we propose a rapid-prototyping framework based on Arduino to solve this problem. For this project we have focused to work with the IO-Link protocol. The framework consists of an Arduino shield that acts as the physical layer, and a software that implements the IO-Link Master protocol. The main advantage of such framework is that an application with industrial devices can be rapid-prototyped with ease as its vendor independent, open-source and can be ported easily to other Arduino compatible boards. In comparison, a typical approach requires proprietary hardware, is not easy to port to another system and is closed-source.},
  language  = {en}
}
@inproceedings{PfaffMelcherFranzen2018,
  author    = {Pfaff, Raphael and Melcher, Karin and Franzen, Julian},
  title     = {Rare event simulation to optimise maintenance intervals of safety critical redundant subsystems},
  series = {Proceedings of the European Conference of the PHM Society},
  volume    = {4},
  booktitle = {Proceedings of the European Conference of the PHM Society},
  number    = {1},
  pages     = {1 -- 6},
  year      = {2018},
  language  = {en}
}
@inproceedings{BueckingPfaffDirksmeier2018,
  author    = {B{\"u}cking, Henrik and Pfaff, Raphael and Dirksmeier, Roger},
  title     = {Sensor positioning and thermal model for condition monitoring of pressure gas reservoirs in vehicles},
  series = {Proceedings of the Fourth European Conference of the Prognostics and Health Management Society, Utrecht, Netherlands, 2018},
  booktitle = {Proceedings of the Fourth European Conference of the Prognostics and Health Management Society, Utrecht, Netherlands, 2018},
  pages     = {5 Seiten},
  year      = {2018},
  language  = {en}
}
@inproceedings{VedralWollert2005,
  author    = {Vedral, Andreas and Wollert, J{\"o}rg},
  title     = {Service based Bluetooth dual-hop networks using CORBA},
  series = {Proceedings of the IASTED International Conference on Artificial Intelligence and Applications : as part of the 23rd IASTED International Multi-Conference on Applied Informatics ; February 14 - 16, 2005, Innsbruck, Austria},
  booktitle = {Proceedings of the IASTED International Conference on Artificial Intelligence and Applications : as part of the 23rd IASTED International Multi-Conference on Applied Informatics ; February 14 - 16, 2005, Innsbruck, Austria},
  publisher = {Acta Pr.},
  address   = {Anaheim, Calif.},
  organization    = {International Conference on Artificial Intelligence and Applications <2005, Innsbruck> ; International Multi-Conference on Applied Informatics <23, 2005, Innsbruck>},
  isbn      = {0-88986-457-8},
  pages     = {724 -- 728},
  year      = {2005},
  language  = {en}
}
@inproceedings{QuadfliegSchoeneSchleseretal.2012,
  author    = {Quadflieg, Till and Schoene, Jens and Schleser, Markus and Jockenh{\"o}vel, Stefan and Reisgen, Uwe and Gries, Thomas},
  title     = {Shear connectors for hybrid joints of metal and FRP},
  series = {Diversity in composites : conference proceedings : Composites Australia and CRC-ACS 2012 conference},
  booktitle = {Diversity in composites : conference proceedings : Composites Australia and CRC-ACS 2012 conference},
  editor    = {Heslehurst, Rikard Benton},
  publisher = {Composites Australia},
  address   = {Hawthorne},
  isbn      = {978-0-9873285-0-2},
  pages     = {[152] -- [160]},
  year      = {2012},
  language  = {en}
}
@inproceedings{SchuermannLeidingerWollert2010,
  author    = {Sch{\"u}rmann, Volker and Leidinger, R. and Wollert, J{\"o}rg},
  title     = {Simplified rapid-prototyping with automation technology},
  series = {Automobiles and sustainable mobility : FISITA 2010 World Automotive Congress, 30 May - 4 June, Budapest, Hungary ; proceedings},
  booktitle = {Automobiles and sustainable mobility : FISITA 2010 World Automotive Congress, 30 May - 4 June, Budapest, Hungary ; proceedings},
  organization    = {FISITA 2010 World Automotive Congress <Budapest>},
  isbn      = {978-963-9058-29-3},
  pages     = {F2010C093},
  year      = {2010},
  language  = {en}
}
@inproceedings{KaschSchmidtEichleretal.2020,
  author    = {Kasch, Susanne and Schmidt, Thomas and Eichler, Fabian and Thurn, Laura and Jahn, Simon and Bremen, Sebastian},
  title     = {Solution approaches and process concepts for powder bed-based melting of glass},
  series = {Industrializing Additive Manufacturing. Proceedings of AMPA2020},
  booktitle = {Industrializing Additive Manufacturing. Proceedings of AMPA2020},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-54333-4 (Print)},
  doi       = {10.1007/978-3-030-54334-1_7},
  pages     = {82 -- 95},
  year      = {2020},
  abstract  = {In the study, the process chain of additive manufacturing by means of powder bed fusion will be presented based on the material glass. In order to reliably process components additively, new concepts with different solutions were developed and investigated. Compared to established metallic materials, the properties of glass materials differ significantly. Therefore, the process control was adapted to the material glass in the investigations. With extensive parameter studies based on various glass powders such as borosilicate glass and quartz glass, scientifically proven results on powder bed fusion of glass are presented. Based on the determination of the particle properties with different methods, extensive investigations are made regarding the melting behavior of glass by means of laser beams. Furthermore, the experimental setup was steadily expanded. In addition to the integration of coaxial temperature measurement and regulation, preheating of the building platform is of major importance. This offers the possibility to perform 3D printing at the transformation temperatures of the glass materials. To improve the component's properties, the influence of a subsequent heat treatment was also investigated. The experience gained was incorporated into a new experimental system, which allows a much better exploration of the 3D printing of glass. Currently, studies are being conducted to improve surface texture, building accuracy, and geometrical capabilities using three-dimensional specimen. The contribution shows the development of research in the field of 3D printing of glass, gives an insight into the machine and process engineering as well as an outlook on the possibilities and applications.},
  language  = {en}
}
@inproceedings{GabrielliMathiesGrossmannetal.2015,
  author    = {Gabrielli, Roland Antonius and Mathies, Johannes and Großmann, Agnes and Herdrich, Georg and Fasoulas, Stefanos and Middendorf, Peter and Fateri, Miranda and Gebhardt, Andreas},
  title     = {Space Propulsion Considerations for a Lunar Take Off Industry Based on Regolith},
  series = {International Symposium on Space Technology and Science (ISTS). July 2015, Kobe, Japan},
  booktitle = {International Symposium on Space Technology and Science (ISTS). July 2015, Kobe, Japan},
  year      = {2015},
  language  = {en}
}
@inproceedings{ThurnGebhardt2018,
  author    = {Thurn, Laura and Gebhardt, Andreas},
  title     = {Strategy of Education on Materials for Students},
  series = {Conference Proceedings: „New Perspectives in Science Education"},
  booktitle = {Conference Proceedings: „New Perspectives in Science Education"},
  address   = {Florence, Italy},
  isbn      = {978-88-6292-976-9},
  pages     = {156 -- 161},
  year      = {2018},
  language  = {en}
}
@inproceedings{BraunChengDoweyetal.2020,
  author    = {Braun, Sebastian and Cheng, Chi-Tsun and Dowey, Steve and Wollert, J{\"o}rg},
  title     = {Survey on Security Concepts to Adapt Flexible Manufacturing and Operations Management based upon Multi-Agent Systems},
  series = {2020 IEEE 29th International Symposium on Industrial Electronics (ISIE)},
  booktitle = {2020 IEEE 29th International Symposium on Industrial Electronics (ISIE)},
  doi       = {10.1109/ISIE45063.2020.9152210},
  year      = {2020},
  language  = {en}
}
@inproceedings{Gebhardt2006,
  author    = {Gebhardt, Andreas},
  title     = {Technology Diffusion through a Multi-Level Technology Transfer Infrastructure. Contribution to the 1st. All Africa Technology Diffusion Conference Boksburg, South Africa June 12th - 14th 2006},
  year      = {2006},
  abstract  = {Table of contents 1. Introduction 2. Multi-level Technology Transfer Infrastructure 2.1 Level 1: University Education - Encourage the Idea of becoming an Entrepreneur 2.2 Level 2: Post Graduate Education - Improve your skills and focus it on a product family. 2.3 Level 3: Birth of a Company - Focus your skills on a product and a market segment. 2.4 Level 4: Ready to stand alone - Set up your own business 2.5 Level 5: Grow to be Strong - Develop your business 2.6 Level 6: Competitive and independent - Stay innovative. 3. Samples 3.1 Sample 1: Laser Processing and Consulting Centre, LBBZ 3.2 Sample 2: Prototyping Centre, CP 4. Funding - Waste money or even lost Money? 5. Conclusion},
  subject      = {Technologietransfer},
  language  = {en}
}
@inproceedings{VedralWollertBudaetal.2006,
  author    = {Vedral, Andreas and Wollert, J{\"o}rg and Buda, A. and Altrock, R.},
  title     = {The capability of bluetooth for real-time transmission in automation},
  series = {Proceedings of the IASTED International Conference on Networks and Communication Systems 2006 : March 29 - 31, 2006, Chiang Mai, Thailand},
  booktitle = {Proceedings of the IASTED International Conference on Networks and Communication Systems 2006 : March 29 - 31, 2006, Chiang Mai, Thailand},
  publisher = {Acta Pr.},
  address   = {Anaheim, Calif.},
  organization    = {International Association of Science and Technology for Development},
  pages     = {168 -- 175},
  year      = {2006},
  language  = {en}
}
@inproceedings{ShahidiPfaffEnning2017,
  author    = {Shahidi, Parham and Pfaff, Raphael and Enning, Manfred},
  title     = {The connected wagon - a concept for the integration of vehicle side sensors and actors with cyber physical representation for condition based maintenance},
  series = {First International Conference on Rail Transportation},
  booktitle = {First International Conference on Rail Transportation},
  pages     = {1 -- 8},
  year      = {2017},
  language  = {en}
}
@inproceedings{WalkLaufferRaupachDilgeretal.2004,
  author    = {Walk-Lauffer, Bernd and Raupach, Michael and Dilger, Klaus and B{\"o}hm, Stefan and Mundt, F. and Dilthey, Ulrich and Schleser, Markus},
  title     = {The interconnection between inner filaments of textile reinforcement by means of polymer modified concrete},
  series = {Proceedings of the First International Conference on Innovative Materials and Technologies for Construction and Restoration : : Lecce, June 6 - 9, 2004 / Universit{\`a} degli Studi di Lecce / ed. Antonio La Tegola. Vol. 1: Key-notes, materials, construction},
  booktitle = {Proceedings of the First International Conference on Innovative Materials and Technologies for Construction and Restoration : : Lecce, June 6 - 9, 2004 / Universit{\`a} degli Studi di Lecce / ed. Antonio La Tegola. Vol. 1: Key-notes, materials, construction},
  publisher = {Liguori},
  address   = {Napoli},
  pages     = {150 -- 159},
  year      = {2004},
  language  = {en}
}
@inproceedings{Wollert2012,
  author    = {Wollert, J{\"o}rg},
  title     = {The performance of UWB-communication in an industrial environment},
  series = {IEEE 1st International Symposium on Wireless Systems : (IDAACS-SWS) : Offenburg, 20-21 Sept. 2012},
  booktitle = {IEEE 1st International Symposium on Wireless Systems : (IDAACS-SWS) : Offenburg, 20-21 Sept. 2012},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  organization    = {International Symposium on Wireless Systems <1, 2012, Offenburg>},
  isbn      = {978-1-4673-4678-8},
  doi       = {10.1109/IDAACS-SWS.2012.6377639},
  pages     = {85 -- 90},
  year      = {2012},
  language  = {en}
}
@inproceedings{SchleupenEngemannBagherietal.2016,
  author    = {Schleupen, Josef and Engemann, Heiko and Bagheri, Mohsen and Kallweit, Stephan},
  title     = {The potential of SMART climbing robot combined with a weatherproof cabin for rotor blade maintenance},
  series = {17th European Conference on Composite Materials - ECCM, Munich, Germany},
  booktitle = {17th European Conference on Composite Materials - ECCM, Munich, Germany},
  pages     = {1 -- 8},
  year      = {2016},
  language  = {en}
}
@inproceedings{FerreinSchifferKallweit2018,
  author    = {Ferrein, Alexander and Schiffer, Stefan and Kallweit, Stephan},
  title     = {The ROSIN Education Concept - Fostering ROS Industrial-Related Robotics Education in Europe},
  series = {ROBOT 2017: Third Iberian Robotics Conference},
  booktitle = {ROBOT 2017: Third Iberian Robotics Conference},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-319-70836-2},
  doi       = {10.1007/978-3-319-70836-2_31},
  pages     = {370 -- 381},
  year      = {2018},
  language  = {en}
}
@inproceedings{ReisgenSchoeneSchleseretal.2010,
  author    = {Reisgen, Uwe and Schoene, Jens and Schleser, Markus and Jerabek, Jakub and Keil, Allessandra},
  title     = {Theoretical and experimental investigations on textile-reinforced concrete spalling behavior},
  series = {Textile reinforced concrete : 2nd ICTRC : International RILEM Conference on Material Science : Aachen Germany, September 6 - 8, 2010. Vol. 1. (RILEM Proceedings PRO ; 75)},
  booktitle = {Textile reinforced concrete : 2nd ICTRC : International RILEM Conference on Material Science : Aachen Germany, September 6 - 8, 2010. Vol. 1. (RILEM Proceedings PRO ; 75)},
  editor    = {Brameshuber, Wolfgang},
  publisher = {RILEM Publ.},
  address   = {Bagneux},
  organization    = {International Conference of Textile Reinforced Concrete <2, 2010, Aachen>},
  isbn      = {978-2-35158-106-3},
  pages     = {153 -- 162},
  year      = {2010},
  language  = {en}
}
@inproceedings{SchoeneReisgenSchleseretal.2010,
  author    = {Schoene, Jens and Reisgen, Uwe and Schleser, Markus and Jerabek, Jakub and Chudoba, Rostislav},
  title     = {Theoretical and experimental investigations on textile-reinforced concrete spalling behavior},
  series = {8th International PhD Symposium in Civil Engineering : Lyngby, June 20-23, 2010 : proceedings},
  booktitle = {8th International PhD Symposium in Civil Engineering : Lyngby, June 20-23, 2010 : proceedings},
  editor    = {Fisher, Gregor},
  publisher = {Technical University of Denmark, Dept. of Civil Engineering},
  address   = {Lyngby},
  organization    = {PhD Symposium in Civil Engineering <8, 2010, Lyngby> ; International Federation for Structural Concrete},
  isbn      = {9788778773012},
  pages     = {383 -- 388},
  year      = {2010},
  language  = {en}
}
@inproceedings{AnikFrohberg1989,
  author    = {Anik, Sabri and Frohberg, Martin G.},
  title     = {Thermodynamic behaviour of oxygen in molten metallic alloys},
  series = {Thermochemistry of alloys : recent developments of experimental methods ; [proceedings of the NATO Advanced Study Institute on Thermochemistry of Alloys, Recent Developments of Experimental Methods, Kiel, F.R.G., August 17 - 27, 1987]. - (NATO ASI series : Series C ; 286)},
  booktitle = {Thermochemistry of alloys : recent developments of experimental methods ; [proceedings of the NATO Advanced Study Institute on Thermochemistry of Alloys, Recent Developments of Experimental Methods, Kiel, F.R.G., August 17 - 27, 1987]. - (NATO ASI series : Series C ; 286)},
  editor    = {Brodowsky, Horst},
  publisher = {Springer},
  address   = {Dordrecht [u.a.]},
  isbn      = {0-7923-0434-9},
  pages     = {419 -- 428},
  year      = {1989},
  language  = {en}
}
@inproceedings{GregorioFatigatiKallweit2015,
  author    = {Gregorio, Fabrizio de and Fatigati, Giovanni and Kallweit, Stephan},
  title     = {Tiltrotor airframe flow field characterization by SPIV},
  series = {11th International Symposium on Partivle Image Velocimetry - PIV15 , Santa Barbara, California, Sept 14-16, 2015},
  booktitle = {11th International Symposium on Partivle Image Velocimetry - PIV15 , Santa Barbara, California, Sept 14-16, 2015},
  pages     = {15 S.},
  year      = {2015},
  language  = {en}
}
@inproceedings{FerreinKallweitLautermann2012,
  author    = {Ferrein, Alexander and Kallweit, Stephan and Lautermann, Mark},
  title     = {Towards an autonomous pilot system for a tunnel boring machine},
  series = {5th Robotics and Mechatronics Conference of South Africa (ROBMECH) : 26 - 27 November 2012 ; CSIR International Conference Centre Gauteng South Africa},
  booktitle = {5th Robotics and Mechatronics Conference of South Africa (ROBMECH) : 26 - 27 November 2012 ; CSIR International Conference Centre Gauteng South Africa},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  isbn      = {978-1-4673-5183-6},
  year      = {2012},
  language  = {en}
}
@inproceedings{PfaffSchmidtEnning2017,
  author    = {Pfaff, Raphael and Schmidt, B. D. and Enning, Manfred},
  title     = {Towards inclusion of the freight rail system in the industrial internet of things - Wagon 4.0},
  series = {Stephenson Conference, London, March 2017},
  booktitle = {Stephenson Conference, London, March 2017},
  pages     = {1 -- 10},
  year      = {2017},
  language  = {en}
}