@book{Klocke1992,
  author    = {Klocke, Martina},
  title     = {CIM, Bedeutung f{\"u}r die Weiterbildung in Klein- und Mittelbetrieben : [Bericht {\"u}ber den EUROTECNET-Workshop "CIM - Bedeutung f{\"u}r die Weiterbildung in Klein- und Mittelbetrieben" vom 16. bis 17. Oktober 1991 in Elmshorn (BR Deutschland)] / [Bericht erstattet von Martina Klocke]},
  publisher = {EUROTECNET},
  address   = {Br{\"u}ssel},
  pages     = {64 S.: Ill.},
  year      = {1992},
  language  = {de}
}
@article{WollbrinkMasloZimmeretal.2020,
  author    = {Wollbrink, Moritz and Maslo, Semir and Zimmer, Daniel and Abbas, Karim and Arntz, Kristian and Bergs, Thomas},
  title     = {Clamping and substrate plate system for continuous additive build-up and post-processing of metal parts},
  series = {Procedia CIRP},
  volume    = {93},
  journal   = {Procedia CIRP},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {2212-8271},
  doi       = {10.1016/j.procir.2020.04.015},
  pages     = {108 -- 113},
  year      = {2020},
  abstract  = {The manufacturing share of laser powder bed fusion (L-PBF) increases in industrial application, but still many process steps are manually operated. Additionally, it is not possible to achieve tight dimensional tolerances or low surfaces roughness. Hence, a process chain has to be set up to combine additive manufacturing (AM) with further machining technologies. To achieve a continuous workpiece flow as basis for further industrialization of L-PBF, the paper presents a novel substrate system and its application on L-PBF machines and post-processing. The substrate system consists of a zero-point clamping system and a matrix-like interface of contact pins to be substantially connected to the workpiece within the L-PBF process.},
  language  = {en}
}
@article{Klocke1981,
  author    = {Klocke, Martina},
  title     = {CNC-Technik holt auf bei der Feinbearbeitung / Voelmy, M.},
  series = {VDI-Nachrichten (1981)},
  journal   = {VDI-Nachrichten (1981)},
  year      = {1981},
  language  = {de}
}
@article{StarkeKuhneFrassek1984,
  author    = {Starke, G{\"u}nther and Kuhne, A.H. and Frassek, B.},
  title     = {Components for the automated GMAW process. Bestandteile des automatischen Metall-Schutzgas-Schweissverfahrens},
  series = {Welding Journal. 63 (1984), H. 1},
  journal   = {Welding Journal. 63 (1984), H. 1},
  isbn      = {0043-2296},
  pages     = {31 -- 34},
  year      = {1984},
  language  = {en}
}
@inproceedings{DiltheySchleser2006,
  author    = {Dilthey, Ulrich and Schleser, Markus},
  title     = {Composite improvement of textile reinforced concrete by polymeric impregnation of the textiles},
  series = {International Symposium Polymers in Concrete : proceedings of ISPIC 2006, 2-4 April 2006 - University of Minho - Guimar{\~a}es, Portugal},
  booktitle = {International Symposium Polymers in Concrete : proceedings of ISPIC 2006, 2-4 April 2006 - University of Minho - Guimar{\~a}es, Portugal},
  editor    = {Barroso de Aguiar, Jose and Jalali, Said and Camoes, Aires and Ferrera, Rui Miguel},
  publisher = {Universidade do Minho, Departamento de Engenharia Civil},
  address   = {Guimar{\~a}es},
  organization    = {International Symposium in Concrete <2006, Guimar{\~a}es)},
  isbn      = {972-99179-1-4},
  pages     = {185 -- 192},
  year      = {2006},
  language  = {en}
}
@inproceedings{PfaffShahidiEnning2017,
  author    = {Pfaff, Raphael and Shahidi, Parham and Enning, Manfred},
  title     = {Connected freight rail rolling stock: a modular approach integrating sensors, actors and cyber physical systems for operational advantages and condition based maintenance},
  series = {Asia-Pacific Conference of the Prognostics and Health Management Society},
  booktitle = {Asia-Pacific Conference of the Prognostics and Health Management Society},
  pages     = {1 -- 7},
  year      = {2017},
  language  = {en}
}
@inproceedings{BeerHaidnWillms1995,
  author    = {Beer, Stefan and Haidn, O.J. and Willms, Herbert},
  title     = {Control of stoichiometric propellant supply in an H2/O2-spinning reserve system},
  series = {Combustion technologies for a clean environment : selected papers from the proceedings of the first international conference, Vilamoura, Portugal, September 3 - 6, 1991. - (Energy, combustion and the environment ;1)},
  booktitle = {Combustion technologies for a clean environment : selected papers from the proceedings of the first international conference, Vilamoura, Portugal, September 3 - 6, 1991. - (Energy, combustion and the environment ;1)},
  editor    = {Carvalho, Maria da Gra{\c{c}}a},
  publisher = {Gordon and Breach},
  address   = {Basel [u.a.]},
  isbn      = {2-88124-619-2},
  pages     = {825 -- 838},
  year      = {1995},
  language  = {en}
}
@inproceedings{WollertPlessmann1993,
  author    = {Wollert, J{\"o}rg and Plessmann, K. W.},
  title     = {Controlling processes by operating-point based hybride observers},
  series = {EUFIT '93 : September 7 - 10, 1993, Eurogress Aachen, Germany, proceedings / First European Congress on Fuzzy and Intelligent Technologies},
  booktitle = {EUFIT '93 : September 7 - 10, 1993, Eurogress Aachen, Germany, proceedings / First European Congress on Fuzzy and Intelligent Technologies},
  publisher = {Verl. d. Augustinus Buchh.},
  address   = {Aachen},
  organization    = {EUFIT <1, 1993, Aachen>},
  isbn      = {3-86073-176-9},
  pages     = {1151 -- 1155},
  year      = {1993},
  language  = {en}
}
@article{EnningStuetzleVierecketal.2006,
  author    = {Enning, Manfred and St{\"u}tzle, Thorsten and Viereck, Uwe and Stribersky, Anton},
  title     = {Creepage control for use in wheelslide protection systems / St{\"u}tzle, Thorsten ; Viereck, Uwe ; Stribersky, Anton ; Rulka, Wolfgang ; Enning, Manfred ; Abel, Dirk},
  series = {Control in transportation systems : proceedings of the 11th IFAC symposium on control in transportation systems (CTS 2006), August 29-31, 2006, Delft, the Netherlands / International Federation of Automatic Control},
  journal   = {Control in transportation systems : proceedings of the 11th IFAC symposium on control in transportation systems (CTS 2006), August 29-31, 2006, Delft, the Netherlands / International Federation of Automatic Control},
  isbn      = {0742-5953},
  pages     = {1 CD-ROM},
  year      = {2006},
  language  = {en}
}
@article{KaemperSchmittGuentherodtetal.1987,
  author    = {K{\"a}mper, Klaus-Peter and Schmitt, W. and G{\"u}ntherodt, G. and Gambino, R. J.},
  title     = {CrO2—A New Half-Metallic Ferromagnet? K{\"a}mper, K.-P.; Schmitt, W.; G{\"u}ntherodt, G.; Gambino, R. J., Ruf, R.},
  series = {Physical Review Letters. 59 (1987), H. 24},
  journal   = {Physical Review Letters. 59 (1987), H. 24},
  isbn      = {1079-7114},
  pages     = {2788 -- 2791},
  year      = {1987},
  language  = {en}
}
@article{AbbasBalcBremenetal.2022,
  author    = {Abbas, Karim and Balc, Nicolae and Bremen, Sebastian and Skupin, Marco},
  title     = {Crystallization and aging behavior of polyetheretherketone PEEK within rapid tooling and rubber molding},
  series = {Journal of Manufacturing and Materials Processing},
  volume    = {6},
  journal   = {Journal of Manufacturing and Materials Processing},
  number    = {5},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {2504-4494},
  doi       = {10.3390/jmmp6050093},
  pages     = {1 -- 12},
  year      = {2022},
  abstract  = {In times of short product life cycles, additive manufacturing and rapid tooling are important methods to make tool development and manufacturing more efficient. High-performance polymers are the key to mold production for prototypes and small series. However, the high temperatures during vulcanization injection molding cause thermal aging and can impair service life. The extent to which the thermal stress over the entire process chain stresses the material and whether it leads to irreversible material aging is evaluated. To this end, a mold made of PEEK is fabricated using fused filament fabrication and examined for its potential application. The mold is heated to 200 ◦C, filled with rubber, and cured. A differential scanning calorimetry analysis of each process step illustrates the crystallization behavior and first indicates the material resistance. It shows distinct cold crystallization regions at a build chamber temperature of 90 ◦C. At an ambient temperature above Tg, crystallization of 30\% is achieved, and cold crystallization no longer occurs. Additional tensile tests show a decrease in tensile strength after ten days of thermal aging. The steady decrease in recrystallization temperature indicates degradation of the additives. However, the tensile tests reveal steady embrittlement of the material due to increasing crosslinking.},
  language  = {en}
}
@techreport{Wollert2008,
  author    = {Wollert, J{\"o}rg},
  title     = {DANA - Dynamische Ad-hoc Netzwerke in der Automatisierungstechnik. Schlussbericht. Laufzeit: 01.09.2004 - 30.06.2008 (BMBF-Forschungsbericht; F{\"o}rderkennzeichen 1714X04)},
  publisher = {BMBF},
  address   = {Berlin},
  pages     = {145 S.},
  year      = {2008},
  language  = {de}
}
@book{Wollert2002,
  author    = {Wollert, J{\"o}rg},
  title     = {Das Bluetooth Handbuch: Technologie, Software, Einsatzfelder, Systementwicklung, Wettbewerb},
  publisher = {Franzis},
  address   = {M{\"u}nchen},
  isbn      = {3-7723-5323-1},
  pages     = {333 S.},
  year      = {2002},
  language  = {de}
}
@book{Knepper1992,
  author    = {Knepper, Ludger},
  title     = {Das Rolltor : Bauwerk{\"o}ffnungs-Abschl{\"u}sse ; Aufbau, Konstruktion, Hinweise zur Berechnung / von Horst G{\"u}nter Steuff ; unter Mitarb. von Ludger Knepper ; Frieder Thiele},
  publisher = {Werner},
  address   = {D{\"u}sseldorf},
  isbn      = {3-8041-3165-4},
  pages     = {XI, 227 S. : zahlr. graph. Darst.},
  year      = {1992},
  language  = {de}
}
@article{Starke1999,
  author    = {Starke, G{\"u}nther},
  title     = {Das Verbundvorhaben 'PROJOIN'. Motivation und Ziele.},
  series = {Qualit{\"a}tsorientierte Schweißtechnik als Wettbewerbsfaktor : neue Wege f{\"u}r die Fertigung von morgen ; Ergebnisse einer vom BMBF gef{\"o}rderten europ{\"a}ischen Forschungskooperation im Rahmen von EUREKA-FAKTORY] / P. Drews ; G. K{\"o}hler (Hrsg.)},
  journal   = {Qualit{\"a}tsorientierte Schweißtechnik als Wettbewerbsfaktor : neue Wege f{\"u}r die Fertigung von morgen ; Ergebnisse einer vom BMBF gef{\"o}rderten europ{\"a}ischen Forschungskooperation im Rahmen von EUREKA-FAKTORY] / P. Drews ; G. K{\"o}hler (Hrsg.)},
  publisher = {DVS-Verl},
  address   = {D{\"u}sseldorf},
  isbn      = {3-87155-663-7},
  pages     = {7 -- 14},
  year      = {1999},
  language  = {de}
}
@inproceedings{StieglitzWollert2010,
  author    = {Stieglitz, Kristian and Wollert, J{\"o}rg},
  title     = {Database driven modernization and expansion of storage systems},
  series = {Proceedings : the 3rd International Multi-Conference on Engineering and Technological Innovation : June 29th - July 2nd, 2010, Orlando, Florida, USA ; vol. 2},
  booktitle = {Proceedings : the 3rd International Multi-Conference on Engineering and Technological Innovation : June 29th - July 2nd, 2010, Orlando, Florida, USA ; vol. 2},
  publisher = {IIIS},
  address   = {Winter Garden, Fla.},
  organization    = {International Multi-Conference on Engineering and Technological Innovation <3, 2010, Orlando, Fla.>},
  isbn      = {978-1-936338-03-0},
  pages     = {180 -- 183},
  year      = {2010},
  language  = {de}
}
@article{PfaffSchmidt2016,
  author    = {Pfaff, Raphael and Schmidt, Bernd},
  title     = {Daten in der Cloud - und dann?},
  series = {Deine Bahn},
  journal   = {Deine Bahn},
  number    = {6},
  publisher = {Bahn-Fachverlag},
  address   = {Berlin},
  issn      = {0948-7263},
  pages     = {50 -- 55},
  year      = {2016},
  abstract  = {Schienenverkehrssysteme stehen in zunehmendem Wettbewerb, sowohl untereinander als auch mit anderen Verkehrstr{\"a}gern. Als wichtiger Aspekt zur Steigerung der Kosteneffizienz wird die Digitalisierung des Betriebs und der Fahrzeuge betrachtet. {\"U}ber eine Prognose der Ausfallwahrscheinlichkeit bzw. Restlebensdauer von Subsystemen k{\"o}nnen mittels Digitalisierung die Instandhaltungskosten gesenkt werden. Die geringen Fehlerraten im System Bahn machen die Nutzung besonderer Simulationstechniken notwendig. In diesem Beitrag wird gezeigt, wie sich die Subsystemverf{\"u}gbarkeit aus den beobachteten Fehlerraten der Teilfunktionen vorhersagen l{\"a}sst.},
  language  = {de}
}
@article{GrundmannKramerKonrath2001,
  author    = {Grundmann, Reinhard and Kramer, C. and Konrath, B.},
  title     = {Der Aeroakustik-Fahrzeugwindkanal von Ford.},
  series = {Automobiltechnische Zeitschrift - ATZ. 103 (2001), H. 10},
  journal   = {Automobiltechnische Zeitschrift - ATZ. 103 (2001), H. 10},
  isbn      = {0001-2785},
  pages     = {932 -- 938},
  year      = {2001},
  language  = {de}
}
@article{GrundmannBommesKlaesetal.1995,
  author    = {Grundmann, Reinhard and Bommes, Leonhard and Klaes, Klaus and Kramer, Carl u.a.},
  title     = {Der Einfluß der Schaufelgestalt von Zentrifugall{\"u}ftern auf deren Leistung und Ger{\"a}uschpegel},
  series = {Noise Control Engineering Journal. 43 (1995), H. 4},
  journal   = {Noise Control Engineering Journal. 43 (1995), H. 4},
  isbn      = {0736-2501},
  pages     = {91 -- 101},
  year      = {1995},
  language  = {de}
}
@article{Wollert2014,
  author    = {Wollert, J{\"o}rg},
  title     = {Der Embedded Wireless-Report},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler ; Sonderh. Wireless : Fachmedium f{\"u}r Entwicklungen funkbasierter Systeme},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler ; Sonderh. Wireless : Fachmedium f{\"u}r Entwicklungen funkbasierter Systeme},
  publisher = {WEKA-Fachmedien},
  address   = {Haar},
  issn      = {0013-5658},
  pages     = {18 -- 25},
  year      = {2014},
  language  = {de}
}
@article{Knepper1985,
  author    = {Knepper, Ludger},
  title     = {Der moderne Luftfrachtverkehr - leistungsfaehig durch seine bodengebundenen Umschlagssysteme},
  pages     = {60 -- 69},
  year      = {1985},
  language  = {de}
}
@incollection{Reichert2014,
  author    = {Reichert, Walter},
  title     = {Der Vertriebsingenieur: Ausbildung und Beruf},
  series = {Berufsstart Technik : das Karriereportal f{\"u}r junge Akademiker ; Ingenieure, Naturwissenschaftler, Informatiker},
  booktitle = {Berufsstart Technik : das Karriereportal f{\"u}r junge Akademiker ; Ingenieure, Naturwissenschaftler, Informatiker},
  publisher = {Resch},
  address   = {Großenkneten},
  pages     = {456 -- 458},
  year      = {2014},
  language  = {de}
}
@article{Grundmann1992,
  author    = {Grundmann, Reinhard},
  title     = {Design Criteria for Aeroacoustic Wind Tunnels},
  year      = {1992},
  language  = {en}
}
@article{FrankoDuKallweitetal.2020,
  author    = {Franko, Josef and Du, Shengzhi and Kallweit, Stephan and Duelberg, Enno Sebastian and Engemann, Heiko},
  title     = {Design of a Multi-Robot System for Wind Turbine Maintenance},
  series = {Energies},
  volume    = {13},
  journal   = {Energies},
  number    = {10},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {1996-1073},
  doi       = {10.3390/en13102552},
  pages     = {Article 2552},
  year      = {2020},
  abstract  = {The maintenance of wind turbines is of growing importance considering the transition to renewable energy. This paper presents a multi-robot-approach for automated wind turbine maintenance including a novel climbing robot. Currently, wind turbine maintenance remains a manual task, which is monotonous, dangerous, and also physically demanding due to the large scale of wind turbines. Technical climbers are required to work at significant heights, even in bad weather conditions. Furthermore, a skilled labor force with sufficient knowledge in repairing fiber composite material is rare. Autonomous mobile systems enable the digitization of the maintenance process. They can be designed for weather-independent operations. This work contributes to the development and experimental validation of a maintenance system consisting of multiple robotic platforms for a variety of tasks, such as wind turbine tower and rotor blade service. In this work, multicopters with vision and LiDAR sensors for global inspection are used to guide slower climbing robots. Light-weight magnetic climbers with surface contact were used to analyze structure parts with non-destructive inspection methods and to locally repair smaller defects. Localization was enabled by adapting odometry for conical-shaped surfaces considering additional navigation sensors. Magnets were suitable for steel towers to clamp onto the surface. A friction-based climbing ring robot (SMART— Scanning, Monitoring, Analyzing, Repair and Transportation) completed the set-up for higher payload. The maintenance period could be extended by using weather-proofed maintenance robots. The multi-robot-system was running the Robot Operating System (ROS). Additionally, first steps towards machine learning would enable maintenance staff to use pattern classification for fault diagnosis in order to operate safely from the ground in the future.},
  language  = {en}
}
@book{Pfeiffer1997,
  author    = {Pfeiffer, Johann},
  title     = {Design und Herstellen von Werkzeugen mit Freiformfl{\"a}chen},
  publisher = {Fachhochsch.},
  address   = {Aachen},
  year      = {1997},
  language  = {de}
}
@inproceedings{HartmannKallweitFeldusenetal.2012,
  author    = {Hartmann, Axel and Kallweit, Stephan and Feldusen, Antje and Schr{\"o}der, Wolfgang},
  title     = {Detection of upstream propagating sound waves at buffet flow using high-speed PIV},
  pages     = {14 S. : graph. Darst.},
  year      = {2012},
  language  = {en}
}
@inproceedings{SchleupenEngemannBagherietal.2017,
  author    = {Schleupen, Josef and Engemann, Heiko and Bagheri, Mohsen and Kallweit, Stephan and Dahmann, Peter},
  title     = {Developing a climbing maintenance robot for tower and rotor blade service of wind turbines},
  series = {Advances in Robot Design and Intelligent Control : Proceedings of the 25th Conference on Robotics in Alpe-Adria-Danube Region (RAAD16)},
  booktitle = {Advances in Robot Design and Intelligent Control : Proceedings of the 25th Conference on Robotics in Alpe-Adria-Danube Region (RAAD16)},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-319-49058-8},
  doi       = {10.1007/978-3-319-49058-8_34},
  pages     = {310 -- 319},
  year      = {2017},
  language  = {en}
}
@inproceedings{VedralKruseWollert2007,
  author    = {Vedral, Andreas and Kruse, Thomas and Wollert, J{\"o}rg},
  title     = {Development and performance evaluation of an antenna diversity module for industrial communication based on IEEE 802.15.4},
  series = {12th IEEE International Conference on Emerging Technologies and Factory Automation : ETFA 2007 : proceedings : 25-28 Sept. 2007, Patras, Greece},
  booktitle = {12th IEEE International Conference on Emerging Technologies and Factory Automation : ETFA 2007 : proceedings : 25-28 Sept. 2007, Patras, Greece},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  organization    = {International Conference on Emerging Technologies and Factory Automation <12, 2007, Patras, Greece>},
  isbn      = {1424408261 ; 9781424408269},
  doi       = {10.1109/EFTA.2007.4416769},
  pages     = {177 -- 186},
  year      = {2007},
  language  = {en}
}
@article{EnningJenayehMuelleretal.1997,
  author    = {Enning, Manfred and Jenayeh, I. and M{\"u}ller, C. and Rake, Heinrich},
  title     = {Development and realization of a manipulator for automatic decoupling of freight cars in marshalling yards / Jenayeh, I. ; M{\"u}ller, C. ; Enning, Manfred ; Rake, Heinrich ; Peter, J.},
  year      = {1997},
  language  = {en}
}
@article{StarkeDrews1985,
  author    = {Starke, G{\"u}nther and Drews, P.},
  title     = {Development approaches for advanced control in automated arc welding},
  pages     = {115 -- 124},
  year      = {1985},
  language  = {en}
}
@article{Kaemper1996,
  author    = {K{\"a}mper, Klaus-Peter},
  title     = {Development of low-cost injection moulded micropumps. Entwicklung von kosteng{\"u}nstigen, mittels Spritzguß hergestellten Mikropumpen / D{\"o}pper, J. (u.a.)},
  series = {Actuator 96 : Conference Proceedings ; 5th International Conference on New Actuators ; 26- 28 June, Bremen, Germany / Ed.: Hubert Borgmann. Publ. by: AXON Technology Consult GmbH},
  journal   = {Actuator 96 : Conference Proceedings ; 5th International Conference on New Actuators ; 26- 28 June, Bremen, Germany / Ed.: Hubert Borgmann. Publ. by: AXON Technology Consult GmbH},
  address   = {Bremen},
  pages     = {37 -- 40},
  year      = {1996},
  language  = {en}
}
@article{KaemperLehrEhrfeldetal.1997,
  author    = {K{\"a}mper, Klaus-Peter and Lehr, H. and Ehrfeld, W. and Hagemann, B.},
  title     = {Development of micro and millimotors. Lehr, H.; Ehrfeld, W.; Hagemann, B.; K{\"a}mper, K.-P.; Michel, F.; Schulz, C.; Th{\"u}rigen C.},
  series = {Minimally Invasive Therapy and Allied Technologies. 6 (1997)},
  journal   = {Minimally Invasive Therapy and Allied Technologies. 6 (1997)},
  isbn      = {1364-5706},
  year      = {1997},
  language  = {en}
}
@inproceedings{VedralWollert2006,
  author    = {Vedral, Andreas and Wollert, J{\"o}rg},
  title     = {Die Analyse industrieller funkgest{\"u}tzter Kommunikationskan{\"a}le},
  series = {Elektrische Automatisierung - Systeme und Komponenten : SPS/IPC/Drives 2006, Fachmesse \& Kongress, 28. - 30. Nov. 2006, N{\"u}rnberg},
  booktitle = {Elektrische Automatisierung - Systeme und Komponenten : SPS/IPC/Drives 2006, Fachmesse \& Kongress, 28. - 30. Nov. 2006, N{\"u}rnberg},
  publisher = {VDE-Verl.},
  address   = {Berlin},
  isbn      = {9783800729944},
  pages     = {279 -- 288},
  year      = {2006},
  language  = {de}
}
@article{KaemperPicardSchuetze2005,
  author    = {K{\"a}mper, Klaus-Peter and Picard, A. and Sch{\"u}tze, A.},
  title     = {Die Ausbildungsfoundry pro-mst und das virtuelle Technologielabor: Ein Konzept f{\"u}r eine exzellente praktische MST-Ausbildung in einem modernen Reinraum zu niedrigen Gesamtkosten. Picard, A.; K{\"a}mper, K.-P.; Sch{\"u}tze, A.},
  series = {Mikrosystemtechnik-Kongress 2005 : 10. bis 12. Oktober 2005 in Freiburg ; gemeinsame Veranstaltung von: Bundesministerium f{\"u}r Bildung und Forschung (BMBF) ... / organisiert von: GMM VDE/VDI-Gesellschaft Mikroelektronik, Mikro- und Feinwerktechnik ... Chairman: Roland Zengerle},
  journal   = {Mikrosystemtechnik-Kongress 2005 : 10. bis 12. Oktober 2005 in Freiburg ; gemeinsame Veranstaltung von: Bundesministerium f{\"u}r Bildung und Forschung (BMBF) ... / organisiert von: GMM VDE/VDI-Gesellschaft Mikroelektronik, Mikro- und Feinwerktechnik ... Chairman: Roland Zengerle},
  publisher = {VDE-Verl.},
  address   = {Berlin},
  isbn      = {3-8007-2926-1},
  pages     = {127},
  year      = {2005},
  language  = {de}
}
@article{PlessmannWollertFiedler1995,
  author    = {Pleßmann, K. W. and Wollert, J{\"o}rg and Fiedler, J{\"o}rg},
  title     = {Die ganzheitliche und objektorientierte Prozesssteuerung - eine Vision?},
  series = {CIM-Management : Produkte, Strategien, Entscheidungshilfen},
  volume    = {11},
  journal   = {CIM-Management : Produkte, Strategien, Entscheidungshilfen},
  number    = {2},
  issn      = {0179-2679},
  pages     = {56 -- 60},
  year      = {1995},
  language  = {de}
}
@book{GauchelDittrich1985,
  author    = {Gauchel, Joachim and Dittrich, G{\"u}nter},
  title     = {Die kinematische Analyse von mehrgliedrigen ebenen Kurbelgetrieben sowie die Synthese von sechgliedrigen Kurbelgetrieben zur Gliedlagenerf{\"u}llung : Bericht d. Inst. f{\"u}r Getriebetechnik u. Maschinendynamik d. Rhein.-Westf. Techn. Hochsch. Aaachen},
  publisher = {VDI-Verl.},
  address   = {D{\"u}sseldorf},
  pages     = {133 S. : graph. Darst., Tab.},
  year      = {1985},
  language  = {de}
}
@article{WollertKruseVedral2007,
  author    = {Wollert, J{\"o}rg and Kruse, Thomas and Vedral, Andreas},
  title     = {Die Kraft der drei Antennen : zuverl{\"a}ssige Funkkommunikation f{\"u}r die Automatisierungstechnik},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler ; Sonderh. Wireless : Fachmedium f{\"u}r Entwicklungen funkbasierter Systeme},
  volume    = {56},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler ; Sonderh. Wireless : Fachmedium f{\"u}r Entwicklungen funkbasierter Systeme},
  number    = {Sonderh. 2},
  issn      = {0013-5658; 1611-5120},
  pages     = {36 -- 42},
  year      = {2007},
  language  = {de}
}
@article{Wollert1999,
  author    = {Wollert, J{\"o}rg},
  title     = {Die Kunst des Weglassens : Windows NT Embedded - Was die neue Version vom Standard-NT unterscheidet},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  volume    = {Bd. 48},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {H. 23},
  issn      = {0013-5658},
  pages     = {116 -- 121},
  year      = {1999},
  language  = {de}
}
@article{Kaemper2002,
  author    = {K{\"a}mper, Klaus-Peter},
  title     = {Die Mikroaktorik wird erwachsen},
  series = {INNO : innovative Technik - neue Anwendungen / Hrsg.: IVAM Fachverband f{\"u}r Mikrotechnik, Dortmund. Ausgabe 22 (2002)},
  journal   = {INNO : innovative Technik - neue Anwendungen / Hrsg.: IVAM Fachverband f{\"u}r Mikrotechnik, Dortmund. Ausgabe 22 (2002)},
  pages     = {4 -- 5},
  year      = {2002},
  language  = {de}
}
@article{PfaffEnning2017,
  author    = {Pfaff, Raphael and Enning, Manfred},
  title     = {Die nachhaltige Alternative zum autonomen Lastwagen},
  series = {Deine Bahn},
  journal   = {Deine Bahn},
  number    = {10},
  pages     = {22 -- 26},
  year      = {2017},
  language  = {de}
}
@article{Wollert2005,
  author    = {Wollert, J{\"o}rg},
  title     = {Die n{\"a}chste "Generation Wireless" : Kommunikation mit hoher Bandbreite wird mobil},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler ; Sonderh. Wireless : Fachmedium f{\"u}r Entwicklungen funkbasierter Systeme},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler ; Sonderh. Wireless : Fachmedium f{\"u}r Entwicklungen funkbasierter Systeme},
  number    = {H. 2},
  issn      = {0013-5658 ; 1611-5120},
  pages     = {40 -- 44},
  year      = {2005},
  language  = {de}
}
@article{Wollert1998,
  author    = {Wollert, J{\"o}rg},
  title     = {Die Produktionslogistik der Front- und Heckmodule f{\"u}r die Smart-Montage in Hambach},
  series = {Logistik f{\"u}r Unternehmen : das Fachmagazin der internen und externen Logistik},
  journal   = {Logistik f{\"u}r Unternehmen : das Fachmagazin der internen und externen Logistik},
  issn      = {0930-7834},
  pages     = {48 -- 51},
  year      = {1998},
  language  = {de}
}
@article{Klocke1995,
  author    = {Klocke, Martina},
  title     = {Die Situation von Ingenieurinnen in Europa - ein L{\"a}ndervergleich},
  series = {Neue Impulse (1995)},
  journal   = {Neue Impulse (1995)},
  isbn      = {0943-4240},
  pages     = {7 -- 16},
  year      = {1995},
  language  = {de}
}
@article{Klocke1996,
  author    = {Klocke, Martina},
  title     = {Die Situation von Ingenieurinnen in Europa - ein L{\"a}ndervergleich},
  series = {Berufsziel: Ingenieurin : Aufbruch in die/der Technik / hrsg. von Renate Kosuch},
  journal   = {Berufsziel: Ingenieurin : Aufbruch in die/der Technik / hrsg. von Renate Kosuch},
  publisher = {Deutscher Studien-Verl.},
  address   = {Weinheim},
  isbn      = {3-89271-645-5},
  pages     = {26 -- 38},
  year      = {1996},
  language  = {de}
}
@article{FrohbergAnik1984,
  author    = {Frohberg, Martin G. and Anik, Sabri},
  title     = {Die Vorausbestimmung der Stickstoffl{\"o}slichkeit in bin{\"a}ren Eisenschmelzen},
  series = {Archiv f{\"u}r das Eisenh{\"u}ttenwesen : Fachberichte},
  volume    = {55},
  journal   = {Archiv f{\"u}r das Eisenh{\"u}ttenwesen : Fachberichte},
  number    = {8},
  issn      = {0003-8962},
  pages     = {365 -- 367},
  year      = {1984},
  language  = {de}
}
@article{Thomas2019,
  author    = {Thomas, Axel},
  title     = {Die Wiederbelebung der Mitarbeiterwohnungsidee bei kommunalen Unternehmen},
  series = {VM Verwaltung und Management},
  volume    = {25},
  journal   = {VM Verwaltung und Management},
  number    = {6},
  publisher = {Nomos-Verl.-Ges.},
  address   = {Baden-Baden},
  issn      = {0947-9856},
  doi       = {10.5771/0947-9856-2019-6-286},
  pages     = {286 -- 291},
  year      = {2019},
  language  = {de}
}
@inproceedings{UlmerMostafaWollert2022,
  author    = {Ulmer, Jessica and Mostafa, Youssef and Wollert, J{\"o}rg},
  title     = {Digital Twin Academy: From Zero to Hero through individual learning experiences},
  series = {Tagungsband AALE 2022 / Herausgegeben von der Hochschule f{\"u}r Technik, Wirtschaft und Kultur Leipzig},
  booktitle = {Tagungsband AALE 2022 / Herausgegeben von der Hochschule f{\"u}r Technik, Wirtschaft und Kultur Leipzig},
  isbn      = {978-3-910103-00-9},
  doi       = {10.33968/2022.33},
  url       = {http://nbn-resolving.de/urn:nbn:de:bsz:l189-qucosa2-776097},
  pages     = {1 -- 9},
  year      = {2022},
  abstract  = {Digital twins are seen as one of the key technologies of Industry 4.0. Although many research groups focus on digital twins and create meaningful outputs, the technology has not yet reached a broad application in the industry. The main reasons for this imbalance are the complexity of the topic, the lack of specialists, and the unawareness of the twin opportunities. The project "Digital Twin Academy" aims to overcome these barriers by focusing on three actions: Building a digital twin community for discussion and exchange, offering multi-stage training for various knowledge levels, and implementing realworld use cases for deeper insights and guidance. In this work, we focus on creating a flexible learning platform that allows the user to select a training path adjusted to personal knowledge and needs. Therefore, a mix of basic and advanced modules is created and expanded by individual feedback options. The usage of personas supports the selection of the appropriate modules.},
  language  = {en}
}
@misc{Gebhardt2005,
  author    = {Gebhardt, Andreas},
  title     = {Digitale Regelungstechnik},
  year      = {2005},
  abstract  = {Grundlagen (Prinzip, Komponenten, Abtastung, Aliasing) Algorithmus (Implementierung, Pseudo Code, Ermittlung der Faktoren) Beispiel},
  language  = {de}
}
@book{PfeifferKnepper1998,
  author    = {Pfeiffer, Johann and Knepper, Ludger},
  title     = {Diplom Ingenieur/Diplom Ingenieurin (Fachhochschule) Maschinenbau Konstruktionstechnik},
  publisher = {Bertelsmann},
  address   = {Bielefeld},
  pages     = {Losebl.-Ausg.},
  year      = {1998},
  language  = {de}
}
@book{KnepperPfeiffer1999,
  author    = {Knepper, Ludger and Pfeiffer, Johann},
  title     = {Diplom-Ingenieur / Diplom-Ingenieurin (Fachhochschule) Maschinenbau, Energie- und W{\"a}rmetechnik},
  publisher = {Bertelsmann},
  address   = {Bielefeld},
  pages     = {Loseblattausg.},
  year      = {1999},
  language  = {de}
}
@book{Baatz1981,
  author    = {Baatz, Udo},
  title     = {Diplom-Ingenieur / Diplom-Ingenieurin an Fachhochschulen: Fachrichtung Maschinenbau : Stand: Dezember 1980},
  publisher = {Bertelsmann},
  address   = {Bielefeld},
  pages     = {31 S., Beil.},
  year      = {1981},
  language  = {de}
}
@book{PfeifferKnepper1995,
  author    = {Pfeiffer, Johann and Knepper, Ludger},
  title     = {Diplom-Ingenieur/Diplom-Ingenieurin ( Fachhochschule ) Maschinenbau - Allgemeiner Maschinenbau},
  publisher = {Bertelsmann},
  address   = {Bielefeld},
  pages     = {Losebl.-Ausg.},
  year      = {1995},
  language  = {de}
}
@book{KnepperPfeiffer1995,
  author    = {Knepper, Ludger and Pfeiffer, Johann},
  title     = {Diplom-Ingenieur/Diplom-Ingenieurin (Fachhochschule) Maschinenbau - Allgemeiner Maschinenbau},
  publisher = {Bertelsmann},
  address   = {Bielefeld},
  pages     = {Loseblattausg.},
  year      = {1995},
  language  = {de}
}
@book{PfeifferKnepper1999,
  author    = {Pfeiffer, Johann and Knepper, Ludger},
  title     = {Diplom-Ingenieur/Diplom-Ingenieurin (Fachhochschule) Maschinenbau Energie- und W{\"a}rmetechnik},
  publisher = {Bertelsmann},
  address   = {Bielefeld},
  pages     = {Losebl.-Ausg.},
  year      = {1999},
  language  = {de}
}
@book{KnepperPfeiffer1998,
  author    = {Knepper, Ludger and Pfeiffer, Johann},
  title     = {Diplom-Ingenieur/Diplom-Ingenieurin (Fachhochschule) Maschinenbau Konstruktionstechnik},
  publisher = {Bertelsmann},
  address   = {Bielefeld},
  pages     = {Loseblattausg.},
  year      = {1998},
  language  = {de}
}
@article{DiltheyBrandenburgSchleser2004,
  author    = {Dilthey, Ulrich and Brandenburg, Annette and Schleser, Markus},
  title     = {Dispensing and application of unfilled adhesives in the micro range},
  series = {Welding and cutting. 3 (2004), H. 4},
  journal   = {Welding and cutting. 3 (2004), H. 4},
  issn      = {1612-3433},
  pages     = {250 -- 254},
  year      = {2004},
  language  = {en}
}
@article{Wollert1997,
  author    = {Wollert, J{\"o}rg},
  title     = {Doping f{\"u}r den Betriebssystem-Kern : Echtzeit-L{\"o}sungen f{\"u}r Windows NT im Vergleich},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  volume    = {Bd. 46},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {H. 20},
  issn      = {0013-5658},
  pages     = {46 -- 50},
  year      = {1997},
  language  = {de}
}
@inproceedings{WeingartSchneiderWollert2009,
  author    = {Weingart, Daniel and Schneider, Ulf and Wollert, J{\"o}rg},
  title     = {Doppelt gekoppelt - Kabellose und dynamische Anbindung von CANopen an Profinet IO},
  series = {Elektrische Automatisierung - Systeme und Komponenten: SPS-IPC-Drives 2009, Fachmesse \& Kongress, 24. - 26. Nov. 2009, N{\"u}rnberg ; [Tagungsband]},
  booktitle = {Elektrische Automatisierung - Systeme und Komponenten: SPS-IPC-Drives 2009, Fachmesse \& Kongress, 24. - 26. Nov. 2009, N{\"u}rnberg ; [Tagungsband]},
  publisher = {VDE-Verl.},
  address   = {Berlin [u.a.]},
  isbn      = {978-3-8007-3184-8},
  pages     = {147 -- 154},
  year      = {2009},
  language  = {de}
}
@techreport{PfaffGeorgeSeileretal.2005,
  author    = {Pfaff, Raphael and George, Alfred and Seiler, Friedrich and Srulijes, Julio},
  title     = {Dopplerbild-Verfahren : Entwicklung einer neuen Auswertemethode. (Bericht / ISL / AGARD ; R 124/2005)},
  publisher = {ISL},
  address   = {Saint Louis, France},
  pages     = {X, 26 S. : Ill., graph. Darst.},
  year      = {2005},
  language  = {de}
}
@article{Wollert2003,
  author    = {Wollert, J{\"o}rg},
  title     = {Dot net und Sun ONE - Wettbewerb oder Mitspieler? Neue Programmiermodelle machen das Web interaktiv},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  volume    = {Bd. 52},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {H. 19},
  issn      = {0013-5658},
  pages     = {72 -- 81},
  year      = {2003},
  language  = {de}
}
@article{WittBogner1990,
  author    = {Witt, Klaus and Bogner, D.},
  title     = {Druckmessung mit zukunftsorientierten Perspektiven},
  series = {Sensor Report. 5 (1990), H. 1},
  journal   = {Sensor Report. 5 (1990), H. 1},
  isbn      = {0179-9592},
  pages     = {8 -- 14},
  year      = {1990},
  language  = {de}
}
@inproceedings{ReisgenSchleserMokrovetal.2010,
  author    = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Schmidt, A. and Rossiter, E. and Loose, T.},
  title     = {Durchg{\"a}ngige Schweißsimulation der Eigenspannung und des Gef{\"u}gezustands auf Basis realer Schweißstromquellenparameter},
  series = {DVS congress 2010 : Große Schweißtechnische Tagung ; Studentenkongress ; Statusseminar "Schneidtechnik" ; Abschlusskolloquium zum AiF-Forschungscluster "Integration des R{\"u}hrreibschweißens in Fertigungsprozessketten" ; Vortr{\"a}ge der Veranstaltung in N{\"u}rnberg am 27. und 28. September 2010. (DVS-Berichte ; 267)},
  booktitle = {DVS congress 2010 : Große Schweißtechnische Tagung ; Studentenkongress ; Statusseminar "Schneidtechnik" ; Abschlusskolloquium zum AiF-Forschungscluster "Integration des R{\"u}hrreibschweißens in Fertigungsprozessketten" ; Vortr{\"a}ge der Veranstaltung in N{\"u}rnberg am 27. und 28. September 2010. (DVS-Berichte ; 267)},
  publisher = {DVS Media},
  address   = {D{\"u}sseldorf},
  organization    = {Deutscher Verband f{\"u}r Schweißen und Verwandte Verfahren ; Große Schweißtechnische Tagung <2010, N{\"u}rnberg>},
  isbn      = {978-3-87155-592-3},
  pages     = {37 -- 42},
  year      = {2010},
  language  = {de}
}
@techreport{BennerPlatt1986,
  author    = {Benner, Joachim and Platt, Werner},
  title     = {Dynamisches Verhalten drehelastischer Kupplungen unter Ber{\"u}cksichtigung allgemeiner Materialgleichungen und Einbeziehung von Ausfallkriterien : Abschlußbericht; Berichtszeitraum 01. 07. 81 - 31. 05. 85. - (Forschungsheft / Forschungsvereinigung Antriebstechnik e.V. ; 221)},
  publisher = {Forschungsvereinigung Antriebstechnik e.V.},
  address   = {Frankfurt/M.},
  pages     = {149 S. : zahlr. Ill.},
  year      = {1986},
  language  = {de}
}
@techreport{Benner1982,
  author    = {Benner, Joachim},
  title     = {Dynamisches Verhalten drehelastischer Kupplungen unter Ber{\"u}cksichtigung allgemeiner Materialgleichungen und Einbeziehung von Ausfallkriterien : Literaturrecherche; Berichtszeitraum 1981 - 1982. - (Forschungsheft / Forschungsvereinigung Antriebstechnik e.V. ; 132)},
  publisher = {Forschungsvereinigung Antriebstechnik e.V.},
  address   = {Frankfurt/M.},
  pages     = {113 S. : zahlr. Ill.},
  year      = {1982},
  language  = {de}
}
@article{Wollert2017,
  author    = {Wollert, J{\"o}rg},
  title     = {Echtzeit-Ethernet - Basis f{\"u}r Industrie 4.0},
  series = {Design \& Elektronik},
  journal   = {Design \& Elektronik},
  number    = {12},
  publisher = {WEKA-Fachmedien},
  address   = {Haar, M{\"u}nchen},
  issn      = {0933-8667},
  pages     = {38 -- 41},
  year      = {2017},
  language  = {de}
}
@article{Wollert2014,
  author    = {Wollert, J{\"o}rg},
  title     = {Echtzeit-Ethernet : Protokoll-Reigen},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  volume    = {Bd. 63},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {H. 26},
  publisher = {WEKA-Fachmedien},
  address   = {Haar},
  issn      = {0013-5658},
  pages     = {24 -- 31},
  year      = {2014},
  language  = {de}
}
@article{Wollert2015,
  author    = {Wollert, J{\"o}rg},
  title     = {Echtzeit-Ethernet : Protokoll-Reigen},
  series = {elektroniknet.de},
  journal   = {elektroniknet.de},
  year      = {2015},
  language  = {de}
}
@article{Wollert2014,
  author    = {Wollert, J{\"o}rg},
  title     = {Echtzeit-Ethernet mit Standardtechnik},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler ; Sonderh. Embedded : Fachmagazin f{\"u}r die Entwicklung von Embedded-Systemen},
  volume    = {Bd. 63},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler ; Sonderh. Embedded : Fachmagazin f{\"u}r die Entwicklung von Embedded-Systemen},
  number    = {H. 12},
  publisher = {WEKA-Fachmedien},
  address   = {Haar},
  issn      = {0013-5658},
  pages     = {28 -- 32},
  year      = {2014},
  language  = {de}
}
@article{Wollert2018,
  author    = {Wollert, J{\"o}rg},
  title     = {Echtzeit-Ethernet - Basis f{\"u}r Industrie 4.0},
  series = {Design \& Elektronik},
  journal   = {Design \& Elektronik},
  publisher = {WEKA-Fachmedien},
  address   = {M{\"u}nchen},
  isbn      = {0933-8667},
  year      = {2018},
  language  = {de}
}
@inproceedings{Wollert2000,
  author    = {Wollert, J{\"o}rg},
  title     = {Echtzeiteigenschaften f{\"u}r Automatisierungsanwendungen mit Ethernet und TCP/IP},
  series = {Tagungsband - SPS/IPC/Drives 2000 : elektrische Automatisierung - Systeme und Komponenten ; 11. Fachmesse \& Kongress 28. - 30. Nov. 2000, N{\"u}rnberg. (Praxiswissen : Automatisierung)},
  booktitle = {Tagungsband - SPS/IPC/Drives 2000 : elektrische Automatisierung - Systeme und Komponenten ; 11. Fachmesse \& Kongress 28. - 30. Nov. 2000, N{\"u}rnberg. (Praxiswissen : Automatisierung)},
  publisher = {H{\"u}thig},
  address   = {Heidelberg},
  organization    = {SPS IPC Drives <11, 2000, N{\"u}rnberg>},
  isbn      = {3-7785-2836-X},
  pages     = {124 -- 132},
  year      = {2000},
  language  = {de}
}
@article{EnningSchlosserRakeetal.1998,
  author    = {Enning, Manfred and Schlosser, A. and Rake, H. and Hild, O.},
  title     = {Echtzeitf{\"a}hige Simulation eines direkteinspritzenden Dieselmotors / Schlosser, A. ; Rake, H. ; Hild, O. ; Kr{\"u}ger, M. ; Pischinger, S.},
  series = {Simulationstechnik : 12. Symposium in Z{\"u}rich, September 1998 ; Tagungsband / [Veranstalter: ASIM-Fachausschuss 4.5 Simulation, Gesellschaft f{\"u}r Informatik ...]. Hrsg. von Max Engeli},
  journal   = {Simulationstechnik : 12. Symposium in Z{\"u}rich, September 1998 ; Tagungsband / [Veranstalter: ASIM-Fachausschuss 4.5 Simulation, Gesellschaft f{\"u}r Informatik ...]. Hrsg. von Max Engeli},
  publisher = {vdf, Hochsch.-Verl. an der ETH},
  address   = {Z{\"u}rich},
  isbn      = {3728126535},
  pages     = {219 -- 226},
  year      = {1998},
  language  = {de}
}
@inproceedings{Wollert1997,
  author    = {Wollert, J{\"o}rg},
  title     = {Echtzeitl{\"o}sungen f{\"u}r Windows NT},
  series = {Kongreßband = Conference proceedings / Echtzeit '97, Kongreß \& Messe f{\"u}r Industrielle Busse und Netze; INet '97, Kongreß \& Messe f{\"u}r Industrielle Computer-Anwendungen, 9. - 11. September 1997, Wiesbaden},
  booktitle = {Kongreßband = Conference proceedings / Echtzeit '97, Kongreß \& Messe f{\"u}r Industrielle Busse und Netze; INet '97, Kongreß \& Messe f{\"u}r Industrielle Computer-Anwendungen, 9. - 11. September 1997, Wiesbaden},
  address   = {Wiesbaden},
  pages     = {13 -- 29},
  year      = {1997},
  language  = {de}
}
@article{Kaemper2003,
  author    = {K{\"a}mper, Klaus-Peter},
  title     = {Education and Training in MST. K{\"a}mper, K.-P.; Picard, A.; Brill, M.; Cassel, D.; Jentsch, A.; Merten, S.; Rollwa, M.},
  series = {Mst-News (2003)},
  journal   = {Mst-News (2003)},
  isbn      = {0948-3128},
  pages     = {35},
  year      = {2003},
  language  = {en}
}
@inproceedings{ThurnBalcGebhardtetal.2017,
  author    = {Thurn, Laura and Balc, Nicolae and Gebhardt, Andreas and Kessler, Julia},
  title     = {Education packed in technology to promote innovations: Teaching Additive Manufacturing based on a rolling Lab},
  series = {Modern Technologies in Manufacturing (MTeM 2017 - AMaTUC)},
  booktitle = {Modern Technologies in Manufacturing (MTeM 2017 - AMaTUC)},
  issn      = {2261-236X},
  doi       = {10.1051/matecconf/201713702013},
  pages     = {6 Seiten},
  year      = {2017},
  language  = {en}
}
@article{KaemperSchmittGuentherodt1987,
  author    = {K{\"a}mper, Klaus-Peter and Schmitt, W. and G{\"u}ntherodt, G.},
  title     = {Effect of adsorbates on the spin-polarized photoemission of itinerant ferromagnets. Schmitt, W.; K{\"a}mper, K.-P.; G{\"u}ntherodt, G.},
  series = {Physical Review B. 36 (1987), H. 7},
  journal   = {Physical Review B. 36 (1987), H. 7},
  isbn      = {1095-3795},
  pages     = {3763 -- 3768},
  year      = {1987},
  language  = {en}
}
@article{HeinrichsWeck1981,
  author    = {Heinrichs, Horst and Weck, H.},
  title     = {Efficient finite-element structural analysis by interactive graphic mesh generation},
  series = {CIRP Annals. 30 (1981), H. 1},
  journal   = {CIRP Annals. 30 (1981), H. 1},
  pages     = {279 -- 284},
  year      = {1981},
  language  = {en}
}
@book{Wollert1995,
  author    = {Wollert, J{\"o}rg},
  title     = {Ein Beitrag zur kognitiven Modellierung regelungstechnischer Systeme unter Ber{\"u}cksichtigung heuristischer und analytischer Merkmale. (Fortschrittberichte VDI : Reihe 8, Meß-, Steuerungs- und Regelungstechnik ; 450)},
  publisher = {VDI-Verl.},
  address   = {D{\"u}sseldorf},
  isbn      = {3-18-345008-9},
  pages     = {VIII, 165 S.},
  year      = {1995},
  language  = {de}
}
@book{Pfeiffer2004,
  author    = {Pfeiffer, Johann},
  title     = {Ein Beitrag zur systematischen Beschreibung der Parameter und deren Einfluss auf die Maßgenauigkeit und Oberfl{\"a}chenqualit{\"a}t bei der Erzeugung und Herstellung von Freiformgeometrien : das System CAD/CAM/CAQ - Generieren, Herstellen, Messen},
  publisher = {Fachhochsch.},
  address   = {Aachen},
  year      = {2004},
  language  = {de}
}
@book{Raatschen1986,
  author    = {Raatschen, Hans-J{\"u}rgen},
  title     = {Ein Bicharakteristikenverfahren zur Berechnung von Spannungswellen in krummlinig berandeten Scheiben},
  publisher = {RWTH Aachen},
  address   = {Aachen},
  pages     = {110 S. : Ill., graph. Darst.},
  year      = {1986},
  language  = {de}
}
@inproceedings{Wollert2003,
  author    = {Wollert, J{\"o}rg},
  title     = {Ein Low-Power Bordrechner als Kommunikationsgateway f{\"u}r den Automotive-Bereich},
  series = {Bluetooth : 4. Kongress, Dortmund, 29. - 30 Januar 2003},
  booktitle = {Bluetooth : 4. Kongress, Dortmund, 29. - 30 Januar 2003},
  publisher = {Mesago Messe Frankfurt GmbH},
  address   = {Stuttgart},
  pages     = {1 -- 9},
  year      = {2003},
  language  = {de}
}
@article{Starke1982,
  author    = {Starke, G{\"u}nther},
  title     = {Ein Steuerungskonzept zum automatischen Lichtbogenschweissen},
  series = {DVS-Berichte. 73 (1982)},
  journal   = {DVS-Berichte. 73 (1982)},
  isbn      = {0418-9639},
  pages     = {109 -- 114},
  year      = {1982},
  language  = {de}
}
@inproceedings{BudaVredalWollert2007,
  author    = {Buda, Aurel and Vredal, Andreas and Wollert, J{\"o}rg},
  title     = {Einfache Integration von funkgest{\"u}tzten Kommunikationssystemen in der Automation},
  series = {Wireless Technologies : 9. Kongress, 18. - 19. September 2007, Stuttgart ; von der Technologie zur Anwendung},
  booktitle = {Wireless Technologies : 9. Kongress, 18. - 19. September 2007, Stuttgart ; von der Technologie zur Anwendung},
  editor    = {Wollert, J{\"o}rg},
  publisher = {Aka},
  address   = {Berlin},
  organization    = {Wireless-Technologies-Kongress <9, 2007, Stuttgart>},
  isbn      = {978-3-89838-084-3},
  pages     = {189 -- 198},
  year      = {2007},
  language  = {de}
}
@inproceedings{ReisgenSchleserSchiebahnetal.2010,
  author    = {Reisgen, Uwe and Schleser, Markus and Schiebahn, Alexander and Harms, Alexander},
  title     = {Einfluss der Maschineneigenschaften beim Widerstandspunktschweißen mit Schweißzangen},
  series = {Treffpunkt Widerstandsschweißen : Vortr{\"a}ge der gleichnamigen Sondertagung in Duisburg am 05. und 06. Mai 2010 ; [21. DVS-Sondertagung Widerstandsschweissen 2010 ; Tagungsband]},
  booktitle = {Treffpunkt Widerstandsschweißen : Vortr{\"a}ge der gleichnamigen Sondertagung in Duisburg am 05. und 06. Mai 2010 ; [21. DVS-Sondertagung Widerstandsschweissen 2010 ; Tagungsband]},
  publisher = {GSI SLV Duisburg},
  address   = {Duisburg},
  organization    = {Deutscher Verband f{\"u}r Schweißen und Verwandte Verfahren ; Schweißtechnische Lehr- und Versuchsanstalt <Duisburg> ; DVS-Sondertagung Widerstandsschweißen <21, 2010, Duisburg>},
  pages     = {147 -- 149},
  year      = {2010},
  language  = {de}
}
@article{PeekenAbdelLatifBenner1985,
  author    = {Peeken, Heinz and Abdel-Latif, Lotfie Ahmed and Benner, Joachim},
  title     = {Einfluss der {\"O}lversch{\"a}umung auf Axiallager mit Kreis- und Michell-Segmenten},
  series = {VDI-Z : Zeitschrift f{\"u}r integrierte Produktion},
  volume    = {127},
  journal   = {VDI-Z : Zeitschrift f{\"u}r integrierte Produktion},
  number    = {5},
  publisher = {Springer-VDI-Verl},
  address   = {D{\"u}sseldorf},
  issn      = {0042-1766},
  pages     = {145 -- 151},
  year      = {1985},
  language  = {de}
}
@article{AnikTopuzTuncel1991,
  author    = {Anik, Sabri and Topuz, A. and Tuncel, H. S.},
  title     = {Einfluß der Parameter beim Diffusionsschweißen der St{\"a}hle X 210 Cr 12 und 25 MoCr 4 auf ihre mechanischen Eigenschaften},
  series = {Schweißen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren},
  volume    = {43},
  journal   = {Schweißen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren},
  number    = {6},
  issn      = {0036-7184},
  pages     = {341 -- 344},
  year      = {1991},
  language  = {de}
}
@article{AnikTopuzTuncel1992,
  author    = {Anik, Sabri and Topuz, A. and Tuncel, H. S.},
  title     = {Einfluß der Parameter beim Diffusionsschweißen der St{\"a}hle X210Cr12 mit 25 CrMo4 auf die Ausbildung der Bindezone},
  series = {Schweißen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren},
  volume    = {44},
  journal   = {Schweißen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren},
  number    = {2},
  issn      = {0036},
  pages     = {97 -- 100},
  year      = {1992},
  language  = {de}
}
@book{Klocke1986,
  author    = {Klocke, Martina},
  title     = {Einfluß des Gef{\"u}ges von Edelkorundschleifscheiben auf ihre Werkstoffkennwerte und das Schleifverhalten},
  publisher = {Hanser},
  address   = {M{\"u}nchen},
  isbn      = {3446148299},
  pages     = {181 S : graph. Darst.},
  year      = {1986},
  language  = {de}
}
@article{GrundmannKramer1991,
  author    = {Grundmann, Reinhard and Kramer, Carl},
  title     = {Einheitliche Darstellung von Str{\"o}mungsger{\"a}uschen. Beschreibung der Schalleistung und Darstellung einiger Str{\"o}mungsger{\"a}usche - 2. Teil.},
  series = {HLH - Zeitschrift f{\"u}r Heizung, L{\"u}ftung, Klimatechnik, Haustechnik. 42 (1991), H. 4},
  journal   = {HLH - Zeitschrift f{\"u}r Heizung, L{\"u}ftung, Klimatechnik, Haustechnik. 42 (1991), H. 4},
  isbn      = {0017-9906},
  pages     = {275 -- 281},
  year      = {1991},
  language  = {de}
}
@article{GrundmannKramer1991,
  author    = {Grundmann, Reinhard and Kramer, Carl},
  title     = {Einheitliche Darstellung von Str{\"o}mungsger{\"a}uschen. Beschreibung der Schalleistung und Darstellung einiger Str{\"o}mungsger{\"a}usche. 1. Teil.},
  series = {HLH - Zeitschrift f{\"u}r Heizung, L{\"u}ftung, Klimatechnik, Haustechnik. 42 (1991), H. 3},
  journal   = {HLH - Zeitschrift f{\"u}r Heizung, L{\"u}ftung, Klimatechnik, Haustechnik. 42 (1991), H. 3},
  isbn      = {0017-9906},
  pages     = {233 -- 238},
  year      = {1991},
  language  = {de}
}
@article{KaemperHagemannEhrfeldetal.1996,
  author    = {K{\"a}mper, Klaus-Peter and Hagemann, B. and Ehrfeld, W. and Lehr, H.},
  title     = {Einsatz der Finite-Elemente-Methode f{\"u}r die Entwicklung von Permanentmagnet-Mikromotoren. Hagemann, B.; Ehrfeld, W.; K{\"a}mper, K.-P.; Lehr, H.; Michel, F.; Th{\"u}rigen, C.},
  series = {Tagungsband : 3. Workshop Methoden- und Werkzeuge zum Entwurf von Mikrosystemen mit dem Schwerpunkt Methoden zum Entwurf, zur Integration und Parametrisierung von Komponenten f{\"u}r Applikationsspezifische Integrierte Mikrosysteme : 27. und 28. Juni 1996, VDE-Haus Frankfurt a. M.},
  journal   = {Tagungsband : 3. Workshop Methoden- und Werkzeuge zum Entwurf von Mikrosystemen mit dem Schwerpunkt Methoden zum Entwurf, zur Integration und Parametrisierung von Komponenten f{\"u}r Applikationsspezifische Integrierte Mikrosysteme : 27. und 28. Juni 1996, VDE-Haus Frankfurt a. M.},
  publisher = {C-LAB/Analoge Systemtechnik, 1996},
  address   = {Paderborn},
  pages     = {225 S. : graph. Darst.},
  year      = {1996},
  language  = {de}
}
@article{KallweitDuesMuelleretal.2007,
  author    = {Kallweit, Stephan and Dues, Michael and M{\"u}ller, Ulli and Lederer, Thomas},
  title     = {Einsatz der Particle Image Velocimetry zur Untersuchung von Rohrstr{\"o}mungen / Kallweit, Stephan ; Dues, Michael ; M{\"u}ller, Ulli ; Lederer, Thomas ; Schroll, Michael ; Willert, Christian},
  series = {Lasermethoden in der Str{\"o}mungsmesstechnik: 15. Fachtagung 2007 Rostock / Hrsg.: Alfred Leder ....},
  journal   = {Lasermethoden in der Str{\"o}mungsmesstechnik: 15. Fachtagung 2007 Rostock / Hrsg.: Alfred Leder ....},
  isbn      = {978-3-86009-007-7},
  pages     = {35},
  year      = {2007},
  language  = {de}
}
@inproceedings{DilgerMundDiltheyetal.2003,
  author    = {Dilger, Klaus and Mund, Frank and Dilthey, Ulrich and Schleser, Markus and Raupach, Michael and Walk-Lauffer, Bernd},
  title     = {Einsatz einer polymeren Phase zur Verbundverbesserung},
  series = {Textile reinforced structures : proceedings of the 2nd Colloquium on Textile Reinforced Structures (CTRS2), Dresden, Germany, 29.9. - 1.10.2003},
  booktitle = {Textile reinforced structures : proceedings of the 2nd Colloquium on Textile Reinforced Structures (CTRS2), Dresden, Germany, 29.9. - 1.10.2003},
  editor    = {Curbach, Manfred},
  publisher = {Techn. Univ.},
  address   = {Dresden},
  organization    = {Colloquium on Textile Reinforced Structures <2, 2003, Dresden>},
  isbn      = {3-86005-386-8},
  pages     = {133 -- 144},
  year      = {2003},
  language  = {de}
}
@book{Schleser2008,
  author    = {Schleser, Markus},
  title     = {Einsatz polymerimpr{\"a}gnierter, alkaliresistenter Glastextilien zur Bewehrung zementgebundener Matrices. (Aachener Berichte F{\"u}getechnik ; Bd. 6)},
  publisher = {Shaker},
  address   = {Aachen},
  isbn      = {978-3-8322-7696-6},
  pages     = {XVI, 129 S. : Ill., graph. Darst.},
  year      = {2008},
  language  = {de}
}
@book{Knepper1978,
  author    = {Knepper, Ludger},
  title     = {Einsatz undAuslegung von Hochlagersystemen fuer Container, dargestellt am Beispiel einer Seehafenumschlaganlage},
  address   = {Aachen},
  year      = {1978},
  language  = {de}
}
@article{Pfaff2017,
  author    = {Pfaff, Raphael},
  title     = {Einsatz von offenen Onlinekursen in der Eisenbahnlehre},
  series = {Deine Bahn},
  journal   = {Deine Bahn},
  number    = {1},
  publisher = {Bahn-Fachverlag},
  address   = {Berlin},
  issn      = {0948-7263},
  pages     = {12 -- 16},
  year      = {2017},
  abstract  = {Eigene positive Erfahrungen mit Onlinekursen sowie die geringen Studierendenzahlen in der Pr{\"a}senzlehre gaben den Anstoß zu einem Experiment mit einem offenen Onlinekurs auf der Plattform Udemy. Die Erfahrungen sowohl bei der Erstellung und als auch im Lehrbetrieb waren positiv und f{\"u}hrten zu einer neuen Besch{\"a}ftigung mit Inhalten und Lernenden, getrieben durch die Anforderungen der Lernplattform.},
  language  = {de}
}
@article{WollertVedral2002,
  author    = {Wollert, J{\"o}rg and Vedral, Andreas},
  title     = {Einsatz von Open-Source-Software f{\"u}r Bluetooth-Evaluationsprototypen : Anwendungsempfehlungen und Einsatzbeispiele},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  volume    = {Bd. 51},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {H. 22},
  issn      = {0013-5658},
  pages     = {70 -- 73},
  year      = {2002},
  language  = {de}
}
@inproceedings{WollertVedral2002,
  author    = {Wollert, J{\"o}rg and Vedral, Andreas},
  title     = {Einsatz von Opensource-Software f{\"u}r Evaluationsprototypen : Anwendungsempfehlungen und Einsatzbeispiele},
  series = {Vortr{\"a}ge und Begleittexte zum Entwicklerforum Wireless 2002 : Technologien und Grundlagen ; 16. Mai 2002},
  booktitle = {Vortr{\"a}ge und Begleittexte zum Entwicklerforum Wireless 2002 : Technologien und Grundlagen ; 16. Mai 2002},
  publisher = {Design \& Elektronik},
  address   = {Poing},
  organization    = {Entwicklerforum Wireless <2002, M{\"u}nchen>},
  pages     = {37 -- 46},
  year      = {2002},
  language  = {de}
}
@inproceedings{Wollert2003,
  author    = {Wollert, J{\"o}rg},
  title     = {Einsatz von Wireless Technologien im Kraftfahrzeug},
  series = {Sichere Datenkommunikation im Automobil : Kongress ; 18. - 19. November 2003, Radisson SAS Hotel, K{\"o}ln},
  booktitle = {Sichere Datenkommunikation im Automobil : Kongress ; 18. - 19. November 2003, Radisson SAS Hotel, K{\"o}ln},
  address   = {K{\"o}ln},
  organization    = {ESCAR-Tagung <2003, K{\"o}ln>},
  pages     = {Getr. Z{\"a}hlung},
  year      = {2003},
  language  = {de}
}
@article{Starke1988,
  author    = {Starke, G{\"u}nther},
  title     = {Einsatzmoeglichkeiten des Roboterschweissens im Behaelterbau},
  series = {DVS-Berichte. 115 (1988)},
  journal   = {DVS-Berichte. 115 (1988)},
  isbn      = {0418-9639},
  pages     = {38 -- 43},
  year      = {1988},
  language  = {de}
}
@article{Enning2008,
  author    = {Enning, Manfred},
  title     = {Einzelwagenkonzept f{\"u}r die letzte Meile : „FlexCargoRail" sieht autarke Fahrten von Waggons mit Rangiergeschwindigkeit vor. Massive Effizienzgewinne locken},
  series = {Deutsche Verkehrs-Zeitung : DVZ / Logistik auf der Schiene (2008)},
  journal   = {Deutsche Verkehrs-Zeitung : DVZ / Logistik auf der Schiene (2008)},
  isbn      = {0342-166X},
  year      = {2008},
  language  = {de}
}