@article{ReisgenSchleserAbdurakhmanovetal.2012, author = {Reisgen, Uwe and Schleser, Markus and Abdurakhmanov, Aydemir and Gumenyuk, Andrey}, title = {Measuring of plasma properties induced by non-vacuum electron beam welding}, series = {Physics of plasma}, volume = {19}, journal = {Physics of plasma}, number = {1}, publisher = {AIP Publishing}, address = {Melville, NY}, issn = {1089-7674 (E-Journal); 1070-664X (Print)}, doi = {10.1063/1.3675874}, pages = {1 -- 7}, year = {2012}, abstract = {Electron beam plasma measurement was realised by means of DIABEAM system invented by ISF RWTH Aachen. The Langmuir probe method is used for measurement. The relative simplicity of the method and the possibility of dispersion of high power on the probe allow its application for the investigation of high-power electron beams. The key element of the method is a rotating thin tungsten wire, which intersects the beam transversely on its axis and collects part of the current by itself. The signals, which are registered in the DIABEAM as a voltage, were taken in the form of amplitude. The conversion of the probe current into the distribution along the beam radius was realised using the Abel's method. A voltage-current characteristic was built for the beam current. The local electron density as well as the electron temperature, the floating potential and the plasma potential were measured and calculated by means of this characteristic.}, language = {en} } @article{EnningJenayehMuelleretal.1998, author = {Enning, Manfred and Jenayeh, I. and M{\"u}ller, C. and Kositza, N.}, title = {Mechatronics in automating shunting processes in marshalling yards / Jenayeh, I. ; M{\"u}ller, C.; Kositza, N. ; Enning, M. ; Rake, H.}, series = {Mechatronics '98 : proceedings of the 6th UK Mechatronics Forum International Conference, Sk{\"o}vde, Sweden, 9-11 September 1998}, journal = {Mechatronics '98 : proceedings of the 6th UK Mechatronics Forum International Conference, Sk{\"o}vde, Sweden, 9-11 September 1998}, publisher = {Pergamon}, address = {Amsterdam}, isbn = {0-08-043339-1}, pages = {xxi, 918 S. : graph. Darst.}, year = {1998}, language = {en} } @article{Starke2002, author = {Starke, G{\"u}nther}, title = {Mechatronik und Robotik in der Fertigung - Entwicklung eines integrierten Fertigungskonzepts zur automatisierten Regenerierung von Umformwerkzeugen}, series = {Advanced driving systems : Tagungsband / ISOM Chemnitz 2002, Chemnitz, Germany, March 21 - 22, 2002. Ed. by Peter Maisser}, journal = {Advanced driving systems : Tagungsband / ISOM Chemnitz 2002, Chemnitz, Germany, March 21 - 22, 2002. Ed. by Peter Maisser}, publisher = {Inst. f{\"u}r Mechatronik}, address = {Chemnitz}, isbn = {3-00-007504-6}, pages = {193 -- 203}, year = {2002}, language = {de} } @article{EnningPischingerRakeetal.2000, author = {Enning, Manfred and Pischinger, S. and Rake, H. and Kr{\"u}ger, M.}, title = {Mehrgr{\"o}ßenregelung beim direkt einspritzenden Pkw-Dieselmotor / Pischinger, S. ; Rake, H. ; Kr{\"u}ger, M. ; Enning, M. ; Fieweger, K. ; Kinoo, B. ; Schloßer, A.}, series = {Dieselmotorentechnik 2000 : aktueller Stand und Entwicklungstendenzen ; mit 17 Tabellen und 106 Literaturstellen / Michael Bargende. Ulf Essers (Hrsg.)}, journal = {Dieselmotorentechnik 2000 : aktueller Stand und Entwicklungstendenzen ; mit 17 Tabellen und 106 Literaturstellen / Michael Bargende. Ulf Essers (Hrsg.)}, publisher = {Expert-Verl.}, address = {Renningen-Malmsheim}, isbn = {3-8169-1829-8}, pages = {198 -- 217}, year = {2000}, language = {de} } @article{ReisgenSchleserJerabeketal.2010, author = {Reisgen, Uwe and Schleser, Markus and Jerabek, Jakub and Chudoba, Rostislav}, title = {Messung der Strahlqualit{\"a}t einer Elektronenstrahlanlage in Umgebungsatmosph{\"a}re}, series = {Materialwissenschaft und Werkstofftechnik}, volume = {41}, journal = {Materialwissenschaft und Werkstofftechnik}, number = {1}, publisher = {Wiley-VCH}, address = {Weinheim}, issn = {1521-4052}, pages = {45 -- 52}, year = {2010}, abstract = {In den letzten Jahrzehnten hat das Elektronenstrahlschweißen, das bereits im gr{\"o}ßeren Maßstab verwendet wird, seine F{\"a}higkeit als qualitatives Werkzeug f{\"u}r die Verbindung verschiedener Materialen nachgewiesen. Das Non Vacuum Electron Beam Welding (NV-EBW) hat zahlreiche Vorteile im Vergleich zum Elektronenstrahlschweißen im Vakuum, da man unter normalem Atmosph{\"a}rendruck arbeiten kann. Im Hinblick auf die reproduzierbare Qualit{\"a}t, insbesondere im Bereich der Massen-Fertigung, ist die Kontrolle der Strahlparameter sowie deren Einfluss auf das Schweißergebnis von großer Bedeutung. Durch eine genaue Kenntnis der Strahlkenngr{\"o}ßen wie des Strahldurchmessers und der Leistungsdichteverteilung kann eine Aussage {\"u}ber die sich ausbildende Schweißnaht sowie die Schweißbaddynamik getroffen werden. Messungen der Strahlkenngr{\"o}ßen im Prozess erlauben insbesondere die Untersuchung von Humping-Effekten. In diesem Beitrag wird der Prozess der Elektronenstrahlvermessung unter atmosph{\"a}rischen Bedingungen beschrieben. Es wird zudem die Abh{\"a}ngigkeit der Elektronenstrahlcharakteristika von den verschiedenen Prozessparametern dargestellt.}, language = {de} } @article{BaatzWiendahl1971, author = {Baatz, Udo and Wiendahl, Hans Peter}, title = {Methoden des Konstruierens - {\"U}bersicht {\"u}ber Ger{\"a}te, Methoden und Hilfsmittel zur Beseitigung des Engpasses Konstruktion, Teil 1}, series = {Grundlagen der Landtechnik}, volume = {21}, journal = {Grundlagen der Landtechnik}, number = {2}, publisher = {VDI-Verlag}, address = {D{\"u}sseldorf}, isbn = {0017-4920}, pages = {35 -- 38}, year = {1971}, abstract = {Der Konstruktionsbereich ist zu einem neuen Schwerpunkt der allgemeinen Rationalisierungsbem{\"u}hungen geworden. Zunehmend f{\"u}hrt man organisatorische Hilfsmittel, technische Hilfsmittel (EDVA) und neue Konstruktionsmethoden in der Konstruktion ein. Der vorliegende Beitrag analysiert zun{\"a}chst die Ursachen dieser Entwicklung und zeigt im weiteren einige heute bereits eingesetzte Hilfsmittel an Hand von Beispielen auf und diskutiert die Anwendungsm{\"o}glichkeiten.}, language = {de} } @article{BaatzWiendahl1971, author = {Baatz, Udo and Wiendahl, Hans Peter}, title = {Methoden des Konstruierens - {\"U}bersicht {\"u}ber Ger{\"a}te, Methoden und Hilfsmittel zur Beseitigung des Engpasses Konstruktion, Teil 2}, series = {Grundlagen der Landtechnik}, volume = {212}, journal = {Grundlagen der Landtechnik}, number = {3}, publisher = {VDI-Verlag}, address = {D{\"u}sseldorf}, isbn = {0017-4920}, pages = {77 -- 80}, year = {1971}, abstract = {Der Konstruktionsbereich ist zu einem neuen Schwerpunkt der allgemeinen Rationalisierungsbem{\"u}hungen geworden. Zunehmend f{\"u}hrt man organisatorische Hilfsmittel, technische Hilfsmittel (EDVA) und neue Konstruktionsmethoden in der Konstruktion ein. Der vorliegende Beitrag analysiert zun{\"a}chst die Ursachen dieser Entwicklung und zeigt im weiteren einige heute bereits eingesetzte Hilfsmittel an Hand von Beispielen auf und diskutiert die Anwendungsm{\"o}glichkeiten.}, language = {de} } @book{EngelnMuellgesZimmermann1992, author = {Engeln-M{\"u}llges, Gisela and Zimmermann, Hans-J{\"u}rgen}, title = {Methoden und Modelle des Operations Research : f{\"u}r Ingenieure, {\"O}konomen und Informatiker / Hans-J{\"u}rgen Zimmermann. [Hrsg. von Gisela Engeln-M{\"u}llges] - 2., {\"u}berarb. Aufl.}, publisher = {Vieweg}, address = {Braunschweig ; Wiesbaden}, isbn = {3-528-18917-7}, pages = {XVI, 385 S. : graph. Darst. ; 23 cm}, year = {1992}, language = {de} } @inproceedings{DannenSchindelePruemmeretal.2022, author = {Dannen, Tammo and Schindele, Benedikt and Pr{\"u}mmer, Marcel and Arntz, Kristian and Bergs, Thomas}, title = {Methodology for the self-optimizing determination of additive manufacturing process eligibility and optimization potentials in toolmaking}, series = {Procedia CIRP}, volume = {107}, booktitle = {Procedia CIRP}, publisher = {Elsevier}, address = {Amsterdam}, issn = {2212-8271}, doi = {10.1016/j.procir.2022.05.188}, pages = {1539 -- 1544}, year = {2022}, abstract = {Additive Manufacturing (AM) of metallic workpieces faces a continuously rising technological relevance and market size. Producing complex or highly strained unique workpieces is a significant field of application, making AM highly relevant for tool components. Its successful economic application requires systematic workpiece based decisions and optimizations. Considering geometric and technological requirements as well as the necessary post-processing makes deciding effortful and requires in-depth knowledge. As design is usually adjusted to established manufacturing, associated technological and strategic potentials are often neglected. To embed AM in a future proof industrial environment, software-based self-learning tools are necessary. Integrated into production planning, they enable companies to unlock the potentials of AM efficiently. This paper presents an appropriate methodology for the analysis of process-specific AM-eligibility and optimization potential, added up by concrete optimization proposals. For an integrated workpiece characterization, proven methods are enlarged by tooling-specific figures. The first stage of the approach specifies the model's initialization. A learning set of tooling components is described using the developed key figure system. Based on this, a set of applicable rules for workpiece-specific result determination is generated through clustering and expert evaluation. Within the following application stage, strategic orientation is quantified and workpieces of interest are described using the developed key figures. Subsequently, the retrieved information is used for automatically generating specific recommendations relying on the generated ruleset of stage one. Finally, actual experiences regarding the recommendations are gathered within stage three. Statistic learning transfers those to the generated ruleset leading to a continuously deepening knowledge base. This process enables a steady improvement in output quality.}, language = {en} } @article{KaemperDoepperClemensetal.1997, author = {K{\"a}mper, Klaus-Peter and D{\"o}pper, J. and Clemens, M. and Ehrfeld, W.}, title = {Micro gear pumps for dosing of viscous fluids. / D{\"o}pper, J. (u.a.)}, series = {Journal of Micromechanics and Microengineering. 7 (1997), H. 3}, journal = {Journal of Micromechanics and Microengineering. 7 (1997), H. 3}, isbn = {0960-1317}, pages = {230 -- 232}, year = {1997}, language = {en} } @article{KaemperLehrAbeletal.1996, author = {K{\"a}mper, Klaus-Peter and Lehr, H. and Abel, S. and D{\"o}pper, J.}, title = {Microactuators as driving units for microrobotic systems. Herstellung von Mikroaktoren mit dem LIGA-Verfahren f{\"u}r Mikroroboter / Lehr, H.; Abel, S.; D{\"o}pper, J.; Ehrfeld, W.; Hagemann, B.; K{\"a}mper, K.-P.; Michel, F.; Schulu, c.; Th{\"u}rigen, C.}, series = {Proceedings of the SPIE - The International Society for Optical Engineering}, journal = {Proceedings of the SPIE - The International Society for Optical Engineering}, isbn = {0277-786X}, pages = {202 -- 210}, year = {1996}, language = {en} } @article{KaemperEhrfeldDoepperetal.1997, author = {K{\"a}mper, Klaus-Peter and Ehrfeld, W. and D{\"o}pper, J. and Hessel, V.}, title = {Microfluidic components for biological and chemical microreactors. K{\"a}mper, K.-P.; Ehrfeld, W.; D{\"o}pper, J.; Hessel, V.; Lehr, H.; L{\"o}we, H.; Richter, T.; Wolf, A.}, series = {Proceedings : an investigation of micro structures, sensors, actuators, machines and robots ; Nagoya, Japan, January 26 - 30, 1997 / IEEE Robotics and Automation Society ...}, journal = {Proceedings : an investigation of micro structures, sensors, actuators, machines and robots ; Nagoya, Japan, January 26 - 30, 1997 / IEEE Robotics and Automation Society ...}, publisher = {IEEE Service Center}, address = {Piscataway, NJ}, isbn = {0-7803-3744-1}, pages = {338 -- 343}, year = {1997}, language = {en} } @inproceedings{BraunChengLaietal.2019, author = {Braun, Sebastian and Cheng, Chi-Tsun and Lai, Chow Yin and Wollert, J{\"o}rg}, title = {Microservice Architecture for Automation - Realization by the example of a model-factory's manufacturing execution system}, series = {Proceedings of the 23rd World Multi-Conference on Systemics, Cybernetics and Informatics: WMSCI 2019}, booktitle = {Proceedings of the 23rd World Multi-Conference on Systemics, Cybernetics and Informatics: WMSCI 2019}, pages = {33 -- 37}, year = {2019}, language = {en} } @article{RamazaniLiMukherjeeetal.2013, author = {Ramazani, Ali and Li, Yang and Mukherjee, Krishnendu and Prahl, Ulrich and Bleck, Wolfgang and Abdurakhmanov, Aydemir and Schleser, Markus and Reisgen, Uwe}, title = {Microstructure evolution simulation in hot rolled DP600 steel during gas metal arc welding}, series = {Computational materials science}, volume = {Vol. 68}, journal = {Computational materials science}, publisher = {Elsevier}, address = {Amsterdam}, issn = {1879-0801 (E-Book); 0927-0256 (Print)}, pages = {107 -- 116}, year = {2013}, language = {en} } @article{KaemperAbrahamEhrfeldetal.1998, author = {K{\"a}mper, Klaus-Peter and Abraham, M. and Ehrfeld, W. and Hessel, V.}, title = {Microsystem technology: Between research and industrial application. Abraham, M.; Ehrfeld, W.; Hessel, V.; K{\"a}mper, K.-P.; Lacher, M.; Picard, A.}, series = {Microelectronic Engineering. 41-42 (1998)}, journal = {Microelectronic Engineering. 41-42 (1998)}, isbn = {0167-9317}, pages = {47 -- 52}, year = {1998}, language = {en} } @incollection{DiltheyBrandenburgSchleser2005, author = {Dilthey, Ulrich and Brandenburg, Annette and Schleser, Markus}, title = {Mikrokleben}, series = {Montage hybrider Mikrosysteme : Handhabungs- und F{\"u}getechniken f{\"u}r die Klein- und Mittelserienfertigung}, booktitle = {Montage hybrider Mikrosysteme : Handhabungs- und F{\"u}getechniken f{\"u}r die Klein- und Mittelserienfertigung}, publisher = {Springer}, address = {Berlin [u.a.]}, isbn = {978-3-540-23706-8}, pages = {161 -- 172}, year = {2005}, language = {de} } @article{Kaemper1996, author = {K{\"a}mper, Klaus-Peter}, title = {Mikromontage zur Fertigung hybrider Mikrosysteme. Nienhaus, M.; Berg, U.; Ehrfeld, W.; K{\"a}mper, K.-P.; Lehr, H.; Michel, F.}, series = {41. Internationales Wissenschaftliches Kolloquium, Wandel im Maschinenbau durch Feinwerktechik und Mikrosystemtechnik, Bd. 1, Ilmenau, DE, 23.-26. Sep, 1996}, journal = {41. Internationales Wissenschaftliches Kolloquium, Wandel im Maschinenbau durch Feinwerktechik und Mikrosystemtechnik, Bd. 1, Ilmenau, DE, 23.-26. Sep, 1996}, pages = {121 -- 126}, year = {1996}, language = {de} } @article{KaemperLacherAbrahametal.1995, author = {K{\"a}mper, Klaus-Peter and Lacher, M. and Abraham, M. and Ehrfeld, W.}, title = {Mikrosysteme f{\"u}r die Luft- und Raumfahrt. Lacher, M.; Abraham, M.; Ehrfeld, W.; Hagemann, B.; K{\"a}mper, K.-P.; Lehr, H.; Picard, A.; Zetterer, T.}, series = {Deutscher Luft- und Raumfahrtkongreß 1995/1 (1995). Bonn, 26. - 29. September 1995 Motto: "Luft- und Raumfahrt - Schl{\"u}sseltechnologien f{\"u}r das 21. Jahrhundert"}, journal = {Deutscher Luft- und Raumfahrtkongreß 1995/1 (1995). Bonn, 26. - 29. September 1995 Motto: "Luft- und Raumfahrt - Schl{\"u}sseltechnologien f{\"u}r das 21. Jahrhundert"}, publisher = {Deutsche Gesellschaft f{\"u}r Luft- und Raumfahrt}, address = {Lilienthal-Oberth}, pages = {415 -- 423}, year = {1995}, language = {de} } @article{Heinrichs1993, author = {Heinrichs, Horst}, title = {Mit Grafik schafft FEM den Durchbruch}, series = {Maschinen, Anlagen, Verfahren (1993)}, journal = {Maschinen, Anlagen, Verfahren (1993)}, isbn = {0343-043X}, pages = {58 -- 59}, year = {1993}, language = {de} } @article{Wollert1999, author = {Wollert, J{\"o}rg}, title = {Mit verwertbarem Aufwand : Portieren von Software auf Windows CE}, series = {Elektrotechnik f{\"u}r die Automatisierung}, journal = {Elektrotechnik f{\"u}r die Automatisierung}, issn = {0013-581X}, pages = {46 -- 47}, year = {1999}, language = {de} } @inproceedings{BudaJozenfiniWollert2007, author = {Buda, Aurel and Jozenfini, B. and Wollert, J{\"o}rg}, title = {Mobile ad-hoc Network for home automation based on ZigBee application framework}, series = {1st European ZigBee Developer's Conference : June 18 - 20, 2007, Munich, Germany}, booktitle = {1st European ZigBee Developer's Conference : June 18 - 20, 2007, Munich, Germany}, publisher = {Design \& Elektronik}, address = {Poing}, organization = {European ZigBee Developer's Conference <1, 2007, M{\"u}nchen>}, pages = {1 -- 5}, year = {2007}, language = {en} } @inproceedings{KallweitFerreinScholletal.2014, author = {Kallweit, Stephan and Ferrein, Alexander and Scholl, Ingrid and Reichert, Walter}, title = {Mobile Autonome Systeme in der Lehre, am Beispiel der ROS Summer School}, series = {Tagungsband AALE 2014 : das Forum f{\"u}r Fachleute der Automatisierungstechnik aus Hochschulen und Wirtschaft ; 11. Fachkonferenz, Regensburg ; [11. Konferenz f{\"u}r Angewandte Automatisierungstechnik in Lehre und Entwicklung / Ostbayerische Technische Hochschule Regensburg; VFAALE, Verein der Freunde und F{\"o}rderer der Angewandten Automatisierungstechnik]}, booktitle = {Tagungsband AALE 2014 : das Forum f{\"u}r Fachleute der Automatisierungstechnik aus Hochschulen und Wirtschaft ; 11. Fachkonferenz, Regensburg ; [11. Konferenz f{\"u}r Angewandte Automatisierungstechnik in Lehre und Entwicklung / Ostbayerische Technische Hochschule Regensburg; VFAALE, Verein der Freunde und F{\"o}rderer der Angewandten Automatisierungstechnik]}, publisher = {Dt. Industrieverl.}, address = {M{\"u}nchen}, isbn = {978-3-8356-7142-3}, pages = {157 -- 163}, year = {2014}, language = {de} } @inproceedings{Wollert2007, author = {Wollert, J{\"o}rg}, title = {Mobility - Integration von Offboard-Devices in Fahrzeugen}, series = {Begleittexte zum Entwicklerforum Kfz-Elektronik \& FlexRay Solution Day : 15. Mai 2007, Ludwigsburg / hrsg. von Caspar Grote ...}, booktitle = {Begleittexte zum Entwicklerforum Kfz-Elektronik \& FlexRay Solution Day : 15. Mai 2007, Ludwigsburg / hrsg. von Caspar Grote ...}, publisher = {Design \& Elektronik}, address = {Poing}, pages = {47 -- 54}, year = {2007}, language = {de} } @inproceedings{PfaffPichlerGeorgeetal.2007, author = {Pfaff, Raphael and Pichler, Alexander and George, Alfred and Seiler, Friedrich}, title = {Model based image processing for flow visualisation : 16th International Conference on Systems Science, Wroclaw, Poland, September 04 - 06, 2007}, series = {PU / Institut Franco-Allemand de Recherches de Saint-Louis ; 2007, 620}, booktitle = {PU / Institut Franco-Allemand de Recherches de Saint-Louis ; 2007, 620}, publisher = {ISL}, address = {Saint Louis, France}, organization = {International Conference on Systems Science <16, 2007, Wroclaw>}, pages = {1 -- 10}, year = {2007}, language = {en} } @inproceedings{GaoBabilonPfaffetal.2018, author = {Gao, H. and Babilon, Katharina and Pfaff, Raphael and Gan, F. and Reich, A.}, title = {Model of wheel-rail contact for sanding and adhesion enhancement}, series = {Proceedings of the 11th International Conference on Contact Mechanics and Wear of Rail/wheel Systems, CM 2018}, booktitle = {Proceedings of the 11th International Conference on Contact Mechanics and Wear of Rail/wheel Systems, CM 2018}, isbn = {978-946186963-0}, pages = {314 -- 321}, year = {2018}, language = {en} } @article{EnningKositzaRake2001, author = {Enning, Manfred and Kositza, N. and Rake, H.}, title = {Modellbildung und Analyse von Schwingungsph{\"a}nomenen an Kettenkratzf{\"o}rderern / Kositza, N. ; Enning, M. ; Rake, H.}, series = {Automatisierungstechnik im Spannungsfeld neuer Technologien : Tagung Baden-Baden, 22. und 23. Mai 2001 / VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik}, journal = {Automatisierungstechnik im Spannungsfeld neuer Technologien : Tagung Baden-Baden, 22. und 23. Mai 2001 / VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik}, publisher = {VDI-Verl.}, address = {D{\"u}sseldorf}, isbn = {3-18-091608-7}, pages = {577 -- 584}, year = {2001}, language = {de} } @article{EnningGallAbel2008, author = {Enning, Manfred and Gall, Jan and Abel, Dirk}, title = {Modellfabrik im Zeichen der Automatisierungstechnik / Gall, Jan ; Enning, Manfred ; Abel, Dirk}, series = {Automation 2008 - L{\"o}sungen f{\"u}r die Zukunft : der Automatisierungskongress in Deutschland, Tagung Baden-Baden, 3. und 4. Juni 2008 / VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik}, journal = {Automation 2008 - L{\"o}sungen f{\"u}r die Zukunft : der Automatisierungskongress in Deutschland, Tagung Baden-Baden, 3. und 4. Juni 2008 / VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik}, publisher = {VDI-Verl.}, address = {D{\"u}sseldorf}, isbn = {978-3-18-092032-0}, pages = {281 -- 284}, year = {2008}, language = {de} } @article{EnningAbelBollig2006, author = {Enning, Manfred and Abel, D. and Bollig, A.}, title = {Modellfabrik macht Automatisierungstechnik erlebbar / Abel, D. ; Bollig, A. ; Enning, M.}, series = {RWTH-Themen (2006)}, journal = {RWTH-Themen (2006)}, isbn = {0179-079X}, pages = {12 -- 14}, year = {2006}, language = {de} } @article{EnningBolligMannetal.2001, author = {Enning, Manfred and Bollig, A. and Mann, S. and Kaierle, S.}, title = {Modellgest{\"u}tzte Pr{\"a}diktive Regelung beim Laserstrahlschweißen / Bollig, A. ; Mann, S. ; Enning, M. ; Kaierle, S.}, series = {Automatisierungstechnische Praxis : atp. 43 (2001), H. 7}, journal = {Automatisierungstechnische Praxis : atp. 43 (2001), H. 7}, isbn = {0178-2320}, pages = {35 -- 39}, year = {2001}, language = {de} } @inproceedings{MoshiriKahakPfaffGaebeletal.2017, author = {Moshiri-Kahak, Amir and Pfaff, Raphael and G{\"a}bel, Markus and Reich, Alexander}, title = {Modellierung der Adh{\"a}sionsfl{\"a}che im Rad-Schiene-Kontakt unter Einsatz von reibwertverbessernden Mitteln}, series = {15. Internationale Schienenfahrzeugtagung Rad Schiene 2017, Dresden, M{\"a}rz 2017}, booktitle = {15. Internationale Schienenfahrzeugtagung Rad Schiene 2017, Dresden, M{\"a}rz 2017}, pages = {3 Seiten}, year = {2017}, language = {de} } @inproceedings{Wollert1994, author = {Wollert, J{\"o}rg}, title = {Modellierung intelligenter Regelungen mit analytischen und heuristischen Merkmalen}, series = {39. Internationales Wissenschaftliches Kolloquium / Technische Universit{\"a}t Ilmenau, Th{\"u}ringen : 27.-30.09.1994}, booktitle = {39. Internationales Wissenschaftliches Kolloquium / Technische Universit{\"a}t Ilmenau, Th{\"u}ringen : 27.-30.09.1994}, publisher = {Techn. Univ.}, address = {Ilmenau}, organization = {Technische Universit{\"a}t }, issn = {0943-7207}, pages = {181 -- 188}, year = {1994}, language = {de} } @article{ReisgenSchleserMokrovetal.2012, author = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Zabirov, Alexander and F{\"u}ssel, Uwe and Schnick, Michael and Hertel, Martin and Jaeckel, Sebastian}, title = {Modellierung und Visualisierung der MSG-Lichtbogenprozesse}, series = {Schweissen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren}, volume = {64}, journal = {Schweissen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren}, number = {4}, publisher = {DVS Verlag}, address = {D{\"u}sseldorf}, issn = {0036-7184}, pages = {166 -- 174}, year = {2012}, language = {de} } @article{ReisgenSchleserMokrovetal.2012, author = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Zabirov, Alexander and F{\"u}ssel, Uwe and Schnick, Michael and Hertel, Martin and Jaeckel, Sebastian}, title = {Modelling and visualisation of the GMA process}, series = {Welding and Cutting}, volume = {11}, journal = {Welding and Cutting}, number = {4}, publisher = {DVS Verlag}, address = {D{\"u}sseldorf}, issn = {1612-3433}, pages = {242 -- 249}, year = {2012}, language = {en} } @misc{Pfaff2006, type = {Master Thesis}, author = {Pfaff, Raphael}, title = {Modelling of nonlinear systems using piecewise defined models}, year = {2006}, language = {en} } @inproceedings{PfaffMoshiriReichetal.2017, author = {Pfaff, Raphael and Moshiri, Amir and Reich, Alexander and G{\"a}bel, Markus}, title = {Modelling of the effect of sanding on the wheel-rail adhesion area}, series = {First International Conference on Rail Transportation}, booktitle = {First International Conference on Rail Transportation}, pages = {1 -- 7}, year = {2017}, language = {en} } @inproceedings{PfaffVinsonneauBurnham2006, author = {Pfaff, Raphael and Vinsonneau, B. and Burnham, K. J.}, title = {Multiple models for nonlinear systems}, series = {Proceedings / Eigteenth International Conference on Systems Engineering : ICSE 2006 : 5 - 7 September 2006 ; [held at Coventry University, UK]}, booktitle = {Proceedings / Eigteenth International Conference on Systems Engineering : ICSE 2006 : 5 - 7 September 2006 ; [held at Coventry University, UK]}, organization = {International Conference on Systems Engineering <18, 2006, Coventry>}, isbn = {1-84600-013-0}, pages = {347 -- 352}, year = {2006}, language = {en} } @article{KallweitDuesRadke1994, author = {Kallweit, Stephan and Dues, Michael and Radke, Michael}, title = {M{\"o}glichkeiten und Grenzen laseroptischer Verfahren zur Untersuchung hydraulischer Str{\"o}mungsmaschinen / Dues, Michael ; Kallweit, Stephan ; Radke, Michael}, series = {Forschung im Ingenieurwesen. 60 (1994), H. 11-12}, journal = {Forschung im Ingenieurwesen. 60 (1994), H. 11-12}, isbn = {0015-7899}, pages = {332 -- 336}, year = {1994}, language = {de} } @article{Starke1987, author = {Starke, G{\"u}nther}, title = {Nahtfuehrungssensor zur adaptiven Steuerung von Handhabungseinrichtungen fuer das Lichtbogenschweissen}, series = {Schweissen und Schneiden. 39 (1987), H. 4}, journal = {Schweissen und Schneiden. 39 (1987), H. 4}, isbn = {0036-7184}, pages = {191 -- 192}, year = {1987}, language = {de} } @article{Baatz1979, author = {Baatz, Udo}, title = {Neue Aspekte der Integrierten Qualit{\"a}tssicherung f{\"u}r Automobil - Zulieferer}, series = {Jahrbuch f{\"u}r Ingenieure}, journal = {Jahrbuch f{\"u}r Ingenieure}, publisher = {Expert-Verl.}, address = {Grafenau, Z{\"u}rich}, year = {1979}, language = {de} } @article{GebhardtGuntermannSauretal.1996, author = {Gebhardt, Andreas and Guntermann, P. and Saur, G. and Gartzen, Johannes}, title = {Neue Impulse f{\"u}r den Leichtbau. Ein Konstruktionsprinzip f{\"u}r Verbauplatten mit Laserschweißen am verdeckten Stoß.}, series = {Laser-Praxis (1996)}, journal = {Laser-Praxis (1996)}, isbn = {0937-7069}, pages = {21 -- 24}, year = {1996}, language = {de} } @article{KaemperPicardBrilletal.2002, author = {K{\"a}mper, Klaus-Peter and Picard, Antoni and Brill, Manfred and Cassel, Detlef (u.a.)}, title = {Neue Medien f{\"u}r die praktische MST Ausbildung}, series = {Rundschau, FH Kaiserslautern,. Ausgabe Ju (2002)}, journal = {Rundschau, FH Kaiserslautern,. Ausgabe Ju (2002)}, pages = {14 -- 15}, year = {2002}, language = {de} } @article{WilbringEnningPfaffetal.2020, author = {Wilbring, Daniela and Enning, Manfred and Pfaff, Raphael and Schmidt, Bernd}, title = {Neue Perspektiven f{\"u}r die Bahn in der Produktions- und Distributionslogistik durch Prozessautomation}, series = {ETR - Eisenbahntechnische Rundschau}, volume = {69}, journal = {ETR - Eisenbahntechnische Rundschau}, number = {3}, issn = {0013-2845}, pages = {15 -- 19}, year = {2020}, language = {de} } @article{BaatzKehrmann1981, author = {Baatz, Udo and Kehrmann, H.}, title = {Neue Produkte - per Zufall oder mit System?}, series = {Jahrbuch f{\"u}r F{\"u}hrungskr{\"a}fte}, journal = {Jahrbuch f{\"u}r F{\"u}hrungskr{\"a}fte}, publisher = {Expert-Verl.}, address = {Grafenau, Z{\"u}rich}, year = {1981}, language = {de} } @article{Klocke1992, author = {Klocke, Martina}, title = {Neue Technologien - eine Herausforderung f{\"u}r Klein- und Mittelbetriebe}, series = {CIM, Bedeutung f{\"u}r die Weiterbildung in Klein- und Mittelbetrieben : [Bericht {\"u}ber den EUROTECNET-Workshop "CIM - Bedeutung f{\"u}r die Weiterbildung in Klein- und Mittelbetrieben" vom 16. bis 17. Oktober 1991 in Elmshorn (BR Deutschland)] / [Bericht erstattet von Martina Klocke]}, journal = {CIM, Bedeutung f{\"u}r die Weiterbildung in Klein- und Mittelbetrieben : [Bericht {\"u}ber den EUROTECNET-Workshop "CIM - Bedeutung f{\"u}r die Weiterbildung in Klein- und Mittelbetrieben" vom 16. bis 17. Oktober 1991 in Elmshorn (BR Deutschland)] / [Bericht erstattet von Martina Klocke]}, publisher = {EUROTECNET}, address = {Br{\"u}ssel}, pages = {6 -- 8}, year = {1992}, language = {de} } @misc{Wollert2010, author = {Wollert, J{\"o}rg}, title = {Neue Wege in der Kommunikation - Wireless Technologie f{\"u}r Automatisierungsl{\"o}sungen}, organization = {Fachforum Automatisierung <2010, Lemgo>}, pages = {1 -- 17}, year = {2010}, language = {de} } @article{SchwarzGebhardtSchleseretal.2019, author = {Schwarz, Alexander and Gebhardt, Andreas and Schleser, Markus and Popoola, Patricia}, title = {New Welding Joint Geometries Manufactured by Powder Bed Fusion from 316L}, series = {Materials Performance and Characterization 8}, journal = {Materials Performance and Characterization 8}, number = {in press}, issn = {2379-1365}, doi = {10.1520/MPC20180096}, year = {2019}, language = {en} } @article{EnningZambouAbel2004, author = {Enning, Manfred and Zambou, Nathan and Abel, Dirk}, title = {Nonlinear spacing control of following vehicles within platoon a controlled lagrangian approach / Zambou, Nathan ; Enning, Manfred ; Abel, Dirk}, series = {NOLCOS, IFAC Symposium on Nonlinear Control Systems}, journal = {NOLCOS, IFAC Symposium on Nonlinear Control Systems}, pages = {1211 -- 1216}, year = {2004}, language = {en} } @inproceedings{ReisgenSchleserScheiketal.2011, author = {Reisgen, Uwe and Schleser, Markus and Scheik, Sven and Michaeli, Walter and Gr{\"o}nlund, Oliver and Neuß, Andreas and Wunderle, Johannes and Poprawe, Reinhart and R{\"o}sner, A. and Bobzin, Kirsten and Schl{\"a}fer, Thomas and Theiß, Sebastian and Kutschmann, Pia and Haberstroh, Edmund and Flock, Dustin and B{\"u}hrig-Polaczek, Andreas and Jakob, M.}, title = {Novel process chains for the production of plastics/metal-hybrids}, series = {17th International Conference on Concurrent Enterprising (ICE 2011) : Aachen, Germany, 20 - 22 June 2011}, booktitle = {17th International Conference on Concurrent Enterprising (ICE 2011) : Aachen, Germany, 20 - 22 June 2011}, editor = {Thoben, Klaus-Dieter}, publisher = {IEEE}, address = {Piscataway, NJ}, organization = {Forschungsinstitut f{\"u}r Rationalisierung ; International Conference on Concurrent Enterprising <17, 2011, Aachen>}, isbn = {978-1-457-70772-8 ; 978-3-943024-05-0}, pages = {596 -- 604}, year = {2011}, language = {en} } @article{SeilerPichlerPfaffetal.2009, author = {Seiler, Friedrich and Pichler, Alexander and Pfaff, Raphael and Srulijes, Julio}, title = {Novel processing tools for automated doppler picture velocimetry (DPV) evaluation}, series = {Journal of visualization}, volume = {Vol. 12}, journal = {Journal of visualization}, number = {Iss. 4}, issn = {1343-8875}, pages = {323 -- 337}, year = {2009}, language = {en} } @book{EngelnMuellgesUhlig1996, author = {Engeln-M{\"u}llges, Gisela and Uhlig, Frank}, title = {Numeric Algorithms with Fortran}, publisher = {Springer}, address = {Berlin [u.a.]}, isbn = {3-540-60529-0}, pages = {XXII, 602 S. : Ill., graph. Darst. + 1 CD-ROM}, year = {1996}, language = {en} } @book{EngelnMuellgesUhlig1996, author = {Engeln-M{\"u}llges, Gisela and Uhlig, Frank}, title = {Numerical algorithms with C}, publisher = {Springer}, address = {Berlin [u.a.]}, isbn = {3-540-60530-0}, pages = {XXII, 596 S. : graph. Darst. + 1 CD-ROM}, year = {1996}, language = {en} } @article{ReisgenSchleserMokrovetal.2011, author = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Ahmed, Essam}, title = {Numerical and experimental investigation of tensile behavior of laser beam welded TRIP700 steel}, series = {ISIJ international}, volume = {Vol. 51}, journal = {ISIJ international}, number = {No. 3}, publisher = {ISIJ}, address = {Tōkyō}, organization = {Iron and Steel Institute of Japan (ISIJ)}, issn = {1347-5460 (E-Journal); 0915-1559 (Print)}, pages = {429 -- 434}, year = {2011}, language = {en} } @book{Mautner2006, author = {Mautner, Karin}, title = {Numerical treatment of the Black-Scholes variational inequality in computational finance}, address = {Berlin}, pages = {XII, 140 S : graph. Darst.}, year = {2006}, language = {en} } @book{EngelnMuellgesNiederdrenkWodicka2005, author = {Engeln-M{\"u}llges, Gisela and Niederdrenk, Klaus and Wodicka, Reinhard}, title = {Numerik-Algorithmen : Verfahren, Beispiele, Anwendungen. - 9., vollst. {\"u}berarb. und erw. Aufl.}, publisher = {Springer}, address = {Berlin [u.a.]}, isbn = {3-540-62669-7}, pages = {XXI, 677 S. : zahlr. graph. Darst. + 2 CD-ROMs}, year = {2005}, language = {de} } @book{EngelnMuellges2004, author = {Engeln-M{\"u}llges, Gisela}, title = {Numerische Mathematik und Statistik : NUMAS ; multimediales Lehr- und Lernsystem zur Numerischen Mathematik und Statistik ; Abschlussbericht ; Gemeinschaftsprojekt}, publisher = {Projektb{\"u}ro NUMAS, FH [u.a.]}, address = {Aachen}, year = {2004}, language = {de} } @article{RaatschenHolznerBorrmannetal.1991, author = {Raatschen, Hans-J{\"u}rgen and Holzner, M. and Borrmann, M. and Pfrang, W.}, title = {Numerische Simulation von Umformprozessen mit dem expliziten FE-Programm UFO-3D}, pages = {91 -- 105}, year = {1991}, language = {de} } @book{Baatz1985, author = {Baatz, Udo}, title = {Nutzwertanalyse von CAD - Systemen der unteren und mittleren Preisklasse f{\"u}r dem Maschinenbau}, address = {M{\"u}lheim a.d. Ruhr}, year = {1985}, language = {de} } @inproceedings{Wollert1994, author = {Wollert, J{\"o}rg}, title = {Objekt-orientierte Modellierung hybrider Systeme mit heuristischen und analytischen Merkmalen}, series = {Berichtsband / 4. Workshop "Fuzzy Control" des GMA-UA 1.4.2. am 03./04.11.1994 in Dortmund. (Forschungsbericht / Universit{\"a}t Dortmund, Fakult{\"a}t f{\"u}r Elektrotechnik ; 1/94)}, booktitle = {Berichtsband / 4. Workshop "Fuzzy Control" des GMA-UA 1.4.2. am 03./04.11.1994 in Dortmund. (Forschungsbericht / Universit{\"a}t Dortmund, Fakult{\"a}t f{\"u}r Elektrotechnik ; 1/94)}, publisher = {Univ., Fak. f. Elektrotechnik}, address = {Dortmund}, pages = {246 -- 257}, year = {1994}, language = {de} } @masterthesis{Vu2022, type = {Bachelor Thesis}, author = {Vu, Tuan Dat}, title = {Objekterkennung und Schienenerkennung in der Schienenfahrzeugtechnik}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {72 Seiten}, year = {2022}, language = {de} } @article{EngemannDuKallweitetal.2020, author = {Engemann, Heiko and Du, Shengzhi and Kallweit, Stephan and C{\"o}nen, Patrick and Dawar, Harshal}, title = {OMNIVIL - an autonomous mobile manipulator for flexible production}, series = {Sensors}, volume = {20}, journal = {Sensors}, number = {24, art. no. 7249}, publisher = {MDPI}, address = {Basel}, isbn = {1424-8220}, doi = {10.3390/s20247249}, pages = {1 -- 30}, year = {2020}, language = {en} } @inproceedings{PfaffBurnham2008, author = {Pfaff, Raphael and Burnham, Keith J.}, title = {On abstraction and interpretability: a behavioural perspective}, series = {19th International Conference on Systems Engineering 2008 : ICSENG '08 : 19 - 21 Aug. 2008, University of Nevada, Las Vegas, Nevada}, booktitle = {19th International Conference on Systems Engineering 2008 : ICSENG '08 : 19 - 21 Aug. 2008, University of Nevada, Las Vegas, Nevada}, publisher = {IEEE}, address = {Piscataway, NJ}, organization = {International Conference on Systems Engineering <19, 2008, Las Vegas, Nev.>}, isbn = {978-0-7695-3331-5 ; 978-0-7695-2719-2}, pages = {89 -- 94}, year = {2008}, language = {en} } @article{PfaffBurnham2009, author = {Pfaff, Raphael and Burnham, Keith J.}, title = {On abstraction and interpretability: a behavioural perspective}, series = {Systems Science}, volume = {Vol. 35}, journal = {Systems Science}, number = {Iss. 2}, issn = {0137-1223}, pages = {19 -- 26}, year = {2009}, language = {en} } @article{AhmedReisgenSchleseretal.2010, author = {Ahmed, Essam and Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg}, title = {On formability of tailor laser welded blanks of DP/TRIP steel sheets}, series = {Science and technology of welding and joining}, volume = {15}, journal = {Science and technology of welding and joining}, number = {5}, publisher = {Maney}, address = {Leeds}, issn = {1743-2936}, doi = {10.1179/136217110X12731414739754}, pages = {337 -- 342}, year = {2010}, abstract = {This paper aims to evaluate the formability of tailor welded blanks of dual phase (DP600)/transformation induced plasticity (TRIP700) steel sheets. In this work, bead on plate butt joints of 2·5 mm DP600 and 1·2 mm TRIP700 steel sheets were performed using CO2 laser beam welding. Microhardness measurements and transverse tensile testing were carried out to characterise the welds. The formability of base metals and welds were investigated by standard Erichsen test. In a perpendicular tensile test to the weld line, all specimens were fractured at the TRIP base metal, and the strengths were somewhat higher than those of base metal. There was a significant reduction in formability caused by welding of the DP600/TRIP700 steel sheets, and the formability increased with increasing welding speed.}, language = {en} } @inproceedings{FiedlerGottschlichMuellerMelcher2021, author = {Fiedler, Gerda and Gottschlich-M{\"u}ller, Birgit and Melcher, Karin}, title = {Online-Pr{\"u}fungen mit STACK Aufgaben}, series = {Tagungsband ASIM Workshop STS/GMMS/EDU 2021}, booktitle = {Tagungsband ASIM Workshop STS/GMMS/EDU 2021}, editor = {Liu-Henke, Xiaobo and Durak, Umut}, publisher = {ARGESIM Verlag}, address = {Wien}, isbn = {978-3-901608-69-8}, doi = {10.11128/arep.45}, pages = {6 Seiten}, year = {2021}, abstract = {Wir stellen hier exemplarisch STACK Aufgaben vor, die frei von der Problematik sind, welche sich durch diverse Kommunikationswege und (webbasierte) Computer Algebra Systeme (CAS) ergibt. Daher sind sie insbesondere f{\"u}r eine Open-Book Online Pr{\"u}fung geeignet, da eine faire Pr{\"u}fungssituation gew{\"a}hrleistet werden kann.}, language = {de} } @inproceedings{EichlerSkupinThurnetal.2019, author = {Eichler, Fabian and Skupin, Marco and Thurn, Laura and Kasch, Susanne and Schmidt, Thomas}, title = {Operating limits for beam melting of glass materials}, series = {Modern Technologies in Manufacturing (MTeM 2019)}, volume = {299}, booktitle = {Modern Technologies in Manufacturing (MTeM 2019)}, number = {Article 01004}, doi = {10.1051/matecconf/201929901004}, pages = {8 Seiten}, year = {2019}, abstract = {Laser-based Additive Manufacturing (AM) processes for the use of metals out of the powder bed have been investigated profusely and are prevalent in industry. Although there is a broad field of application, Laser Powder Bed Fusion (LPBF), also known as Selective Laser Melting (SLM) of glass is not fully developed yet. The material properties of glass are significantly different from the investigated metallic material for LPBF so far. As such, the process cannot be transferred, and the parameter limits and the process sequence must be redefined for glass. Starting with the characterization of glass powders, a parameter field is initially confined to investigate the process parameter of different glass powder using LPBFprocess. A feasibility study is carried out to process borosilicate glass powder. The effects of process parameters on the dimensional accuracy of fabricated parts out of borosilicate and hints for the post-processing are analysed and presented in this paper.}, language = {en} } @misc{Bellenberg2002, author = {Bellenberg, Markus}, title = {Optimierung einer Roboter-Schweißzelle als Basis eines E-Learning Systems}, year = {2002}, abstract = {Ziel war die technische {\"U}berarbeitung und Optimierung des vorliegenden Prototypen, um eine Basis f{\"u}r ein E-Learning System (Internet unterst{\"u}tztes Lernen) zu schaffen. Zu diesem Zweck wurde das Programm der Robotersteuerung neu erstellt, notwendige mechanische {\"A}nderungen an Roboterequipment und Materialf{\"o}rderung vorgenommen sowie eine neue Internet-Anbindung geschaffen. Wesentliche Ergebnisse der Arbeit sind: • Erzeugen roboterbasierter kreisinterpolierter Bahnschweißn{\"a}hte • Kommunikation des Lernsystems via Internet • Lernorientierte Steuerungssoftware}, subject = {Roboter}, language = {de} } @article{ReisgenSchleserMokrovetal.2012, author = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Ahmed, Essam}, title = {Optimization of laser welding of DP/TRIP steel sheets using statistical approach}, series = {Optics and laser technology}, volume = {44}, journal = {Optics and laser technology}, number = {1}, publisher = {Elsevier}, address = {Amsterdam}, issn = {1879-2545 (E-Journal); 0030-3992 (Print); 0308-4280 (Print)}, doi = {10.1016/j.optlastec.2011.06.028}, pages = {255 -- 262}, year = {2012}, abstract = {Generally, the quality of a weld joint is directly influenced by the welding input parameter settings. Selection of proper process parameters is important to obtain the desired weld bead profile and quality. In this research work, numerical and graphical optimization techniques of the CO2 laser beam welding of dual phase (DP600)/transformation induced plasticity (TRIP700) steel sheets were carried out using response surface methodology (RSM) based on Box-Behnken design. The procedure was established to improve the weld quality, increase the productivity and minimize the total operation cost by considering the welding parameters range of laser power (2-2.2 kW), welding speed (40-50 mm/s) and focus position (-1 to 0 mm). It was found that, RSM can be considered as a powerful tool in experimental welding optimization, even when the experimenter does not have a model for the process. Strong, efficient and low cost weld joints could be achieved using the optimum welding conditions.}, language = {en} } @article{StarkeDrews1984, author = {Starke, G{\"u}nther and Drews, P.}, title = {Optisch-elektronischer Nahtfuehrungssensor zur Schweissnahtverfolgung}, series = {Technisches Messen tm. 51 (1984), H. 7/8}, journal = {Technisches Messen tm. 51 (1984), H. 7/8}, isbn = {0171-8096}, pages = {270 -- 275}, year = {1984}, language = {de} } @inproceedings{SchuermannWollert2008, author = {Sch{\"u}rmann, Volker and Wollert, J{\"o}rg}, title = {Ortsbezogene Fernwartungsdienste mit Bluetooth Ranging und Java Micro Edition}, series = {Automation 2008: L{\"o}sungen f{\"u}r die Zukunft ; der Automatisierungskongress in Deutschland ; Tagung Baden-Baden, 3. und 4. Juni 2008. (VDI-Berichte ; 2032)}, booktitle = {Automation 2008: L{\"o}sungen f{\"u}r die Zukunft ; der Automatisierungskongress in Deutschland ; Tagung Baden-Baden, 3. und 4. Juni 2008. (VDI-Berichte ; 2032)}, publisher = {VDI-Verl.}, address = {D{\"u}sseldorf}, organization = {Automatisierungskongress <2008, Baden-Baden>}, isbn = {978-3-18-092032-0}, pages = {353 -- 356}, year = {2008}, language = {de} } @article{Wollert2016, author = {Wollert, J{\"o}rg}, title = {OS-Funktionalit{\"a}t ohne OS f{\"u}r das IoT}, series = {Design \& Elektronik}, journal = {Design \& Elektronik}, number = {11}, publisher = {WEKA-Fachmedien}, address = {M{\"u}nchen}, issn = {0933-8667}, pages = {85 -- 90}, year = {2016}, abstract = {Low-end-Embedded-Plattformen stellen eine hohe Anforderung an die Entscheidungsf{\"a}higkeit des Entwicklers: Zum n{\"a}chstgr{\"o}ßeren Prozessor greifen und ein Betriebssystem benutzen oder doch besser auf das Betriebssystem verzichten? Die Frage l{\"a}sst sich einfach beantworten: Einen Nanokernel verwenden und das Embedded-System mit einem minimalen Footprint realisieren. Adam Dunkels Protothreads sind eine ausgesprochen effiziente Art, Mikrocontroller gut strukturiert zu programmieren und gleichzeitig auf Overhead zu verzichten. So k{\"o}nnen auch mit kleinen 8-bit-Prozessoren anspruchsvolle Aufgaben in einem Thread-Modell bearbeitet werden. Man muss also nicht immer das Rad neu erfinden oder gleich auf Linux-basierte Systeme zur{\"u}ckgreifen.}, language = {de} } @inproceedings{GrossmannGabrielliHerdrichetal.2015, author = {Großmann, Agnes and Gabrielli, Roland Antonius and Herdrich, Georg and Fasoulas, Stefanos and Schnauffer, Peter and Middendorf, Peter and Fateri, Miranda and Gebhardt, Andreas}, title = {Overview of the MultiRob 3D Lunar Industrial Development Project}, series = {Conference Contribution for the 30th ISTS, Kobe, Japan, 04.07.-10.07.2015}, booktitle = {Conference Contribution for the 30th ISTS, Kobe, Japan, 04.07.-10.07.2015}, pages = {8 S.}, year = {2015}, language = {en} } @inproceedings{Kallweit2012, author = {Kallweit, Stephan}, title = {Pandaboard, TurtleBot, Kinect und Co. : Low-Cost Hardware im Lehreinsatz f{\"u}r die mobile Robotik.}, year = {2012}, abstract = {Mit freundlicher Genehmigung der Autoren und des Oldenbourg Industrieverlags https://www.oldenbourg-industrieverlag.de/de/9783835633223-33223 erschienen als Beitrag im Tagungsband zur AALE-Tagung 2012. 9. Fachkonferenz 4.-5. Mai 2012, Aachen, Fachhochschule. ISBN 9783835633223 S 8-1 S. 229-238 Original-Abstract des Autors: "Die mobile Robotik wird durch den Einsatz von Low-Cost Hardware einem breiten Publikum zug{\"a}nglich. Bis vor kurzem basierte eine erschwingliche Hardware meist auf Mikrocontrollern mit den entsprechenden Leistungseinschr{\"a}nkungen z.B. im Bereich der Bildverarbeitung. Die Wahrnehmung einer 3D-Umgebung und somit die M{\"o}glichkeit zur autonomen Navigation wurde mit relativ kostenintensiver Hardware, z.B. Stereo-Vision-Systemen und Laserscannern gel{\"o}st. Die zur Auswertung der Sensorik notwendige Rechenleistung stand - entweder aufgrund des Stromverbrauchs oder der Performance meist f{\"u}r mobile Plattformen (lokal) - nicht zur Verf{\"u}gung. Durch Einsatz von leistungsf{\"a}higen Prozessoren aus dem Bereich der Mobilger{\"a}te (Smartphones, Tablets) und neuartigen Sensoren des Consumer-Bereichs, wie der Kinect, k{\"o}nnen mobile Roboter kosteng{\"u}nstig f{\"u}r den Einsatz in der Lehre aufgebaut werden.}, subject = {Robotik}, language = {de} } @inproceedings{ChudobaKonradSchleseretal.2009, author = {Chudoba, Rostislav and Konrad, Martin and Schleser, Markus and Meskouris, Konstantin and Reisgen, Uwe}, title = {Parametric study of tensile response of TRC specimens reinforced with epoxy-penetrated multi-filament yarns}, series = {Textilbeton - Theorie und Praxis : Tagungsband zum 4. Kolloquium zu textilbewehrten Tragwerken (CTRS4) und zur 1. Anwendertagung, Dresden, 3.6.2009 - 5.6.2009}, booktitle = {Textilbeton - Theorie und Praxis : Tagungsband zum 4. Kolloquium zu textilbewehrten Tragwerken (CTRS4) und zur 1. Anwendertagung, Dresden, 3.6.2009 - 5.6.2009}, editor = {Curbach, Manfred}, publisher = {Techn. Univ.}, address = {Dresden}, isbn = {978-3-86780-122-5}, pages = {87 -- 98}, year = {2009}, language = {en} } @article{KallweitDuesSiekmann1994, author = {Kallweit, Stephan and Dues, M. and Siekmann, H.}, title = {Particle-Image-Velocimetry (PIV) in rotierenden Maschinen / Dues, M. ; Kallweit, S. ; Siekmann, H.}, series = {Lasermethoden in der Str{\"o}mungsmesstechnik, 3. Fachtagung der Deutschen Gesellschaft f{\"u}r Laser-Anemometrie (GALA), Bremen, DE, 5.-7. Sep, 1994}, journal = {Lasermethoden in der Str{\"o}mungsmesstechnik, 3. Fachtagung der Deutschen Gesellschaft f{\"u}r Laser-Anemometrie (GALA), Bremen, DE, 5.-7. Sep, 1994}, publisher = {Shaker}, address = {Aachen}, isbn = {3-8265-0162-4}, pages = {19.1 -- 19-5}, year = {1994}, language = {en} } @article{Starke1999, author = {Starke, G{\"u}nther}, title = {PC-gest{\"u}tzte Programmierung einer Orbitalschweißanlage}, series = {Qualit{\"a}tsorientierte Schweißtechnik als Wettbewerbsfaktor, DVS-Berichte. 196 (1999)}, journal = {Qualit{\"a}tsorientierte Schweißtechnik als Wettbewerbsfaktor, DVS-Berichte. 196 (1999)}, isbn = {0418-9639}, pages = {65 -- 68}, year = {1999}, language = {de} } @article{BeckenbachScheidweiler2016, author = {Beckenbach, Isabel and Scheidweiler, Robert}, title = {Perfect ƒ-Matchings and ƒ-Factors in Hypergraphs - A Combinatorial Approach}, series = {Discrete Mathematics}, volume = {240}, journal = {Discrete Mathematics}, number = {10}, publisher = {Elsevier}, address = {Amsterdam}, issn = {2192-7782}, doi = {10.1016/j.disc.2017.05.005}, pages = {2499 -- 2506}, year = {2016}, abstract = {We prove characterizations of the existence of perfect ƒ-matchings in uniform mengerian and perfect hypergraphs. Moreover, we investigate the ƒ-factor problem in balanced hypergraphs. For uniform balanced hypergraphs we prove two existence theorems with purely combinatorial arguments, whereas for non-uniform balanced hypergraphs we show that the ƒ-factor problem is NP-hard.}, language = {en} } @article{BraunChengDoweyetal.2021, author = {Braun, Sebastian and Cheng, Chi-Tsun and Dowey, Steve and Wollert, J{\"o}rg}, title = {Performance evaluation of skill-based order-assignment in production environments with multi-agent systems}, series = {IEEE Journal of Emerging and Selected Topics in Industrial Electronics}, journal = {IEEE Journal of Emerging and Selected Topics in Industrial Electronics}, number = {Early Access}, publisher = {IEEE}, address = {New York}, issn = {2687-9735}, doi = {10.1109/JESTIE.2021.3108524}, year = {2021}, abstract = {The fourth industrial revolution introduces disruptive technologies to production environments. One of these technologies are multi-agent systems (MASs), where agents virtualize machines. However, the agent's actual performances in production environments can hardly be estimated as most research has been focusing on isolated projects and specific scenarios. We address this gap by implementing a highly connected and configurable reference model with quantifiable key performance indicators (KPIs) for production scheduling and routing in single-piece workflows. Furthermore, we propose an algorithm to optimize the search of extrema in highly connected distributed systems. The benefits, limits, and drawbacks of MASs and their performances are evaluated extensively by event-based simulations against the introduced model, which acts as a benchmark. Even though the performance of the proposed MAS is, on average, slightly lower than the reference system, the increased flexibility allows it to find new solutions and deliver improved factory-planning outcomes. Our MAS shows an emerging behavior by using flexible production techniques to correct errors and compensate for bottlenecks. This increased flexibility offers substantial improvement potential. The general model in this paper allows the transfer of the results to estimate real systems or other models.}, language = {en} } @inproceedings{WollertRau2012, author = {Wollert, J{\"o}rg and Rau, S.}, title = {Performance von embedded WLAN-Systemen bei koexistierenden Netzwerken}, series = {KOMMA 2012 : Kommunikation in der Automation : 3. Jahreskolloquium Kommunikation in der Automation : Lemgo, 14.11.2012 / J{\"u}rgen Jasperneite ... (Hrsg.)}, booktitle = {KOMMA 2012 : Kommunikation in der Automation : 3. Jahreskolloquium Kommunikation in der Automation : Lemgo, 14.11.2012 / J{\"u}rgen Jasperneite ... (Hrsg.)}, publisher = {Inst. f{\"u}r Industrielle Informationstechnik}, address = {Lemgo}, organization = {Jahreskolloquium Kommunikation in der Automation <3, 2012, Lemgo>}, isbn = {978-3-9814062-2-1}, pages = {1 CD-ROM}, year = {2012}, language = {de} } @inproceedings{BudaSchneiderWollert2009, author = {Buda, Aurel and Schneider, Ulf and Wollert, J{\"o}rg}, title = {Performanceanalyse von Frequenzdiversit{\"a}t in IEEE 802.15.4 Netzwerken}, series = {Wireless Technologies : 11. Kongress, 29. - 30. September 2009, Stuttgart; von der Technologie zur Anwendung / J{\"o}rg F. Wollert (Hrsg.) (Fortschritt-Berichte VDI : Reihe 10, Informatik, Kommunikation ; 800)}, booktitle = {Wireless Technologies : 11. Kongress, 29. - 30. September 2009, Stuttgart; von der Technologie zur Anwendung / J{\"o}rg F. Wollert (Hrsg.) (Fortschritt-Berichte VDI : Reihe 10, Informatik, Kommunikation ; 800)}, publisher = {VDI-Verl.}, address = {D{\"u}sseldorf}, isbn = {978-3-18-380010-0}, pages = {29 -- 38}, year = {2009}, language = {de} } @inproceedings{Wollert2008, author = {Wollert, J{\"o}rg}, title = {Performanceanforderungen von Funkstrecken in der Prozess- und Fertigungsautomation}, series = {Automation 2008: L{\"o}sungen f{\"u}r die Zukunft ; der Automatisierungskongress in Deutschland ; Tagung Baden-Baden, 3. und 4. Juni 2008. (VDI-Berichte ; 2032)}, booktitle = {Automation 2008: L{\"o}sungen f{\"u}r die Zukunft ; der Automatisierungskongress in Deutschland ; Tagung Baden-Baden, 3. und 4. Juni 2008. (VDI-Berichte ; 2032)}, publisher = {VDI-Verl.}, address = {D{\"u}sseldorf}, organization = {Automatisierungskongress <2008, Baden-Baden>}, isbn = {978-3-18-092032-0}, pages = {247 -- 248}, year = {2008}, language = {de} } @article{KallweitSchimpf2003, author = {Kallweit, Stephan and Schimpf, Axel}, title = {Photogrammetric Particle Image Velocimetry / Schimpf, Axel ; Kallweit, Stephan}, series = {Particle image velocimetry : recent improvements; proceedings of the Europiv 2 Workshop held in Zaragoza, Spain, March 31 - April 1, 2003 / edited by M. Stanislas ...}, journal = {Particle image velocimetry : recent improvements; proceedings of the Europiv 2 Workshop held in Zaragoza, Spain, March 31 - April 1, 2003 / edited by M. Stanislas ...}, publisher = {Springer}, address = {Berlin}, isbn = {3-540-21423-2}, pages = {295}, year = {2003}, language = {en} } @article{KallweitKorculaninFroehligetal.2011, author = {Kallweit, Stephan and Korculanin, O. and Fr{\"o}hlig, F. and Gabi, M. and Mattern, P.}, title = {Photogrammetrische Rekonstruktion von Partikelpositionen mittels R{\"u}ckprojektion f{\"u}r 3D-PIV}, series = {Lasermethoden in der Str{\"o}mungsmesstechnik : 19. Fachtagung, 6. - 8. September 2011, Ilmenau ; [Tagungsband enth{\"a}lt ... Beitr{\"a}ge, die anl{\"a}sslich der 19. Fachtagaung "Lasermethoden in der Str{\"o}mungsmesstechnik" ... vorgetragen und diskutiert wurden] / veranst. von der Deutschen Gesellschaft f{\"u}r Laser-Anemometrie GALA e.V. Hrsg. A. Thess...}, journal = {Lasermethoden in der Str{\"o}mungsmesstechnik : 19. Fachtagung, 6. - 8. September 2011, Ilmenau ; [Tagungsband enth{\"a}lt ... Beitr{\"a}ge, die anl{\"a}sslich der 19. Fachtagaung "Lasermethoden in der Str{\"o}mungsmesstechnik" ... vorgetragen und diskutiert wurden] / veranst. von der Deutschen Gesellschaft f{\"u}r Laser-Anemometrie GALA e.V. Hrsg. A. Thess...}, publisher = {Dt. Ges. f{\"u}r Laser-AnemometrieGALA e. V.}, address = {Karlsruhe}, isbn = {978-3-9805613-7-2}, pages = {28/1 -- 28/6}, year = {2011}, language = {de} } @article{KallweitWillertDuesetal.2008, author = {Kallweit, Stephan and Willert, Chris and Dues, Michael and M{\"u}ller, Ulrich}, title = {PIV for Volume Flow Metering / Kallweit, Stephan ; Willert, Chris ; Dues, Michael ; M{\"u}ller, Ulrich ; Lederer, Thomas}, pages = {6 S.}, year = {2008}, language = {en} } @inproceedings{KleineKallweitMichauxetal.2016, author = {Kleine, Harald and Kallweit, Stephan and Michaux, Frank and Havermann, Marc and Olivier, Herbert}, title = {PIV Measurement of Shock Wave Diffraction}, series = {18th International Symposium on Applications of Laser Techniques to Fluid Mechanics, 2016, Lissabon}, booktitle = {18th International Symposium on Applications of Laser Techniques to Fluid Mechanics, 2016, Lissabon}, pages = {1 -- 14}, year = {2016}, language = {en} } @article{KallweitKaminskyRossietal.2008, author = {Kallweit, Stephan and Kaminsky, Radoslav and Rossi, Massimiliano and Morbiducci, Umberto}, title = {PIV Measurements of Flows in Artificial Heart Valves / Kaminsky, Radoslav ; Kallweit, Stephan ; Rossi, Massimiliano ; Morbiducci, Umberto ; Scalise, Lorenzo}, series = {Particle Image Velocimetry - New Developments and Recent Applications}, journal = {Particle Image Velocimetry - New Developments and Recent Applications}, isbn = {978-3-540-73528-1}, pages = {55 -- 72}, year = {2008}, language = {en} } @article{KallweitKaminskyRossietal.2005, author = {Kallweit, Stephan and Kaminsky, R. and Rossi, M. and Scalise, L.}, title = {PIV Measurements with high temporal Resolution behind Artificial Heart Valves / Kaminsky, R. ; Rossi, M. ; Scalise, L. ; Kallweit, S. ; Verdonck, P.}, series = {Proceedings of the 6th International Symposium on Particle Image Velocimetry}, journal = {Proceedings of the 6th International Symposium on Particle Image Velocimetry}, publisher = {Caltech}, address = {Pasadena, CA}, year = {2005}, language = {en} } @article{EnningHildSchlosseretal.1998, author = {Enning, Manfred and Hild, Oliver and Schloßer, Axel and Fieweger, K.}, title = {PKW Dieselmotor mit Abgasturboaufladung, variabler Turbinengeometrie, Abgasr{\"u}ckf{\"u}hrung / Hild, Oliver ; Schloßer, Axel ; Fieweger, K.; Kr{\"u}ger, M. ; Enning, Manfred ; Deutsch, G.}, series = {Abgasr{\"u}ckf{\"u}hrung : Vorhaben Nr. 124 ; Untersuchungen zur Verminderung der emissionsch{\"a}dlicher Abgaskomponenten durch Abgasr{\"u}ckf{\"u}hrung bei schnellaufenden Dieselmotoren unter Einschluß der Abgasturboaufladung / Forschungsvereinigung Verbrennungskraftmaschinen.}, journal = {Abgasr{\"u}ckf{\"u}hrung : Vorhaben Nr. 124 ; Untersuchungen zur Verminderung der emissionsch{\"a}dlicher Abgaskomponenten durch Abgasr{\"u}ckf{\"u}hrung bei schnellaufenden Dieselmotoren unter Einschluß der Abgasturboaufladung / Forschungsvereinigung Verbrennungskraftmaschinen.}, publisher = {FVV}, address = {Frankfurt/M.}, pages = {21 -- 39}, year = {1998}, language = {de} } @inproceedings{RoehrigGrossmannKuenemundetal.2008, author = {R{\"o}hrig, Christof and Großmann, Uwe and K{\"u}nemund, Frank and Gansemer, Sebastian and Sch{\"u}rmann, Volker and Wollert, J{\"o}rg}, title = {Positionsbestimmung mittels Funktechnologien - Vergleich von Verfahren und Technologien mit exemplarischer Demonstration}, series = {Wireless-Technologies-Kongress 2008 : von der Technologie zur Anwendung / Hrsg. J{\"o}rg F. Wollert}, booktitle = {Wireless-Technologies-Kongress 2008 : von der Technologie zur Anwendung / Hrsg. J{\"o}rg F. Wollert}, publisher = {AKA}, address = {Heidelberg}, isbn = {978-3-89838-608-1}, pages = {337 -- 348}, year = {2008}, language = {de} } @article{Gebhardt2002, author = {Gebhardt, Andreas}, title = {Potenziale und Grenzen virtueller Prototypen}, year = {2002}, language = {de} } @article{GebhardtSchmidt2002, author = {Gebhardt, Andreas and Schmidt, Frank-Michael}, title = {Practical experiences with making and finishing of coloured models using 3D printing}, year = {2002}, language = {en} } @inproceedings{VedralWollert2006, author = {Vedral, Andreas and Wollert, J{\"o}rg}, title = {Praktische Untersuchungen zum zeitlichen {\"U}bertragungs- und B{\"u}ndelfehlerverhalten der IEEE 802.15.4}, series = {ZigBee \& Co. - drahtlose Nahbereichsnetzwerke : 04. April 2006, M{\"u}nchen}, booktitle = {ZigBee \& Co. - drahtlose Nahbereichsnetzwerke : 04. April 2006, M{\"u}nchen}, publisher = {Design\&Elektronik}, address = {Poing}, organization = {Entwicklerforum ZigBee \& Co. - Drahtlose Nahbereichsnetzwerke <2006, M{\"u}nchen>}, year = {2006}, language = {de} } @inproceedings{VredalWollert2006, author = {Vredal, Andreas and Wollert, J{\"o}rg}, title = {Praktische Untersuchungen zur Reduzierung der Restfehlerrate von Funksystemen}, series = {Wireless Automation : Chancen, L{\"o}sungen, Risiken ; Tagung Darmstadt, 8. und 9. Mai 2006. (VDI-Berichte ; 1939)}, booktitle = {Wireless Automation : Chancen, L{\"o}sungen, Risiken ; Tagung Darmstadt, 8. und 9. Mai 2006. (VDI-Berichte ; 1939)}, publisher = {VDI-Verl.}, address = {D{\"u}sseldorf}, isbn = {3-18-091939-6}, pages = {135 -- 146}, year = {2006}, language = {de} } @article{HeinrichsSteinke1981, author = {Heinrichs, Horst and Steinke, P.}, title = {Praxisgerechter Einsatz der Finite-Element-Methode zur Bauteilanalyse}, series = {Industrie Anzeiger. 103 (1981), H. 79}, journal = {Industrie Anzeiger. 103 (1981), H. 79}, pages = {42 -- 43}, year = {1981}, language = {de} } @book{Grundmann2002, author = {Grundmann, Reinhard}, title = {Praxishandbuch Thermoprozess-Technik : 1. Grundlagen - Verfahren / Carl Kramer ... (Hrsg.)}, publisher = {Vulkan-Verl.}, address = {Essen}, isbn = {3-8027-2922-6}, pages = {XVII, 592 S. : Ill., graph. Darst.}, year = {2002}, language = {de} } @article{Pfaff2015, author = {Pfaff, Raphael}, title = {Praxisnahe Ausbildung im Fach Schienenfahrzeugtechnik}, series = {Deine Bahn}, journal = {Deine Bahn}, number = {8}, publisher = {Eisenbahn-Fachverlag}, address = {Mainz}, issn = {0172-4479}, pages = {52 -- 55}, year = {2015}, language = {de} } @article{KaemperMertenBrilletal.2005, author = {K{\"a}mper, Klaus-Peter and Merten, Sabine and Brill, Manfred and Picard, Antoni}, title = {Praxisorientierte Ingenieurausbildung durch multimedial unterst{\"u}tzte Laborkurse. Merten, Sabine ; K{\"a}mper, Klaus-Peter ; Brill, Manfred ; Picard, Antoni}, series = {Online-P{\"a}dagogik. Bd. 3 Referenzmodelle und Praxisbeispiele / hrsg. von Burkhard Lehmann ...}, journal = {Online-P{\"a}dagogik. Bd. 3 Referenzmodelle und Praxisbeispiele / hrsg. von Burkhard Lehmann ...}, publisher = {Schneider-Verl. Hohengehren}, address = {Baltmannsweiler}, isbn = {3-89676-987-1}, pages = {278 S. : Ill., graph. Darst.}, year = {2005}, language = {de} } @article{AnikFrohbergKapoor1983, author = {Anik, Sabri and Frohberg, Martin G. and Kapoor, Madan Lal}, title = {Prediction of thermodynamic properties of oxygen in binary metallic solvents}, series = {Zeitschrift f{\"u}r Metallkunde}, volume = {74}, journal = {Zeitschrift f{\"u}r Metallkunde}, number = {6}, issn = {0044-3093}, pages = {372 -- 375}, year = {1983}, language = {en} } @article{GrundmannKramerHilge1986, author = {Grundmann, Reinhard and Kramer, C. and Hilge, B.}, title = {Prinzipien und Entwurf von Anlagen zur W{\"a}rmebehandlung von Halbzeugen}, pages = {129 -- 146}, year = {1986}, language = {de} } @article{HeinrichsWeck1979, author = {Heinrichs, Horst and Weck, M.}, title = {Problemloesungen im Rahmen der konstruktiven Gestaltung}, series = {Industrieanzeiger. 101 (1979), H. 73}, journal = {Industrieanzeiger. 101 (1979), H. 73}, pages = {26 -- 29}, year = {1979}, language = {de} } @article{FateriGebhardt2015, author = {Fateri, Miranda and Gebhardt, Andreas}, title = {Process Parameters Development of Selective Laser Melting of Lunar Regolith for On-Site Manufacturing Applications}, series = {International Journal of Applied Ceramic Technology}, volume = {12}, journal = {International Journal of Applied Ceramic Technology}, number = {1}, publisher = {Wiley-Blackwell}, address = {Oxford}, isbn = {1744-7402}, doi = {10.1111/ijac.12326}, pages = {46 -- 52}, year = {2015}, language = {en} }