@inproceedings{KallweitTedjasukmanaKorculanin2013, author = {Kallweit, Stephan and Tedjasukmana, O. and Korculanin, O.}, title = {Adaption und Implementierung eines 3D-PIV Algorithmus auf massiv paralleler Hardware}, series = {Lasermethoden in der Str{\"o}mungsmesstechnik : 21. Fachtagung, 3. - 5. September 2013, M{\"u}nchen}, booktitle = {Lasermethoden in der Str{\"o}mungsmesstechnik : 21. Fachtagung, 3. - 5. September 2013, M{\"u}nchen}, editor = {K{\"a}hler, Christian J.}, publisher = {GALA}, address = {Karlsruhe}, isbn = {978-3-9805613-9-6}, pages = {Sitzung 4, Vortrag 16}, year = {2013}, language = {de} } @article{ReisgenSchleserSchiebahn2013, author = {Reisgen, Uwe and Schleser, Markus and Schiebahn, Alexander}, title = {Untersuchung zum Einfluss von Maschineneigenschaften von Schweißzangen zum Widerstandspunktschweißen auf das Schweißergebnis}, series = {Schweissen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren}, volume = {Bd. 65}, journal = {Schweissen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren}, number = {H. 6}, publisher = {DVS Verl.}, address = {D{\"u}sseldorf}, issn = {0036-7184}, pages = {309 -- 313}, year = {2013}, language = {de} } @article{RamazaniLiMukherjeeetal.2013, author = {Ramazani, Ali and Li, Yang and Mukherjee, Krishnendu and Prahl, Ulrich and Bleck, Wolfgang and Abdurakhmanov, Aydemir and Schleser, Markus and Reisgen, Uwe}, title = {Microstructure evolution simulation in hot rolled DP600 steel during gas metal arc welding}, series = {Computational materials science}, volume = {Vol. 68}, journal = {Computational materials science}, publisher = {Elsevier}, address = {Amsterdam}, issn = {1879-0801 (E-Book); 0927-0256 (Print)}, pages = {107 -- 116}, year = {2013}, language = {en} } @incollection{Schleser2013, author = {Schleser, Markus}, title = {F{\"u}gen f{\"u}r die Elektromobilit{\"a}t}, series = {Innovation durch Kooperation : wie der Mittelstand durch Zusammenarbeit mit den Hochschulen seine Wettbewerbsf{\"a}higkeit steigert : Festschrift f{\"u}r Prof. Dr. rer. nat. Johannes Gartzen / Thomas Gartzen, Ute Gartzen (Hrsg.)}, booktitle = {Innovation durch Kooperation : wie der Mittelstand durch Zusammenarbeit mit den Hochschulen seine Wettbewerbsf{\"a}higkeit steigert : Festschrift f{\"u}r Prof. Dr. rer. nat. Johannes Gartzen / Thomas Gartzen, Ute Gartzen (Hrsg.)}, publisher = {Apprimus Verlag}, address = {Aachen}, isbn = {978-3-86359-136-6}, pages = {65 -- 70}, year = {2013}, language = {de} } @book{Gebhardt2013, author = {Gebhardt, Andreas}, title = {Generative Fertigungsverfahren : Additive Manufacturing und 3D Drucken f{\"u}r Prototyping - Tooling - Produktion}, edition = {4., neu bearbeitete und erweiterte Auflage}, publisher = {Hanser}, address = {M{\"u}nchen}, isbn = {978-3-446-43651-0 ; 978-3-446-43652-7}, doi = {10.3139/9783446436527}, pages = {XXIV, 637 S. : zahlr. Ill. u. graph. Darst.}, year = {2013}, language = {de} } @inproceedings{StarkeKunkelHahn2013, author = {Starke, G{\"u}nther and Kunkel, Thomas and Hahn, Daniel}, title = {Flexible collaboration and control of heterogeneous mechatronic devices and systems by means of an event-driven, SOA-based automation concept}, series = {2013 IEEE International Conference on Industrial Technologies (ICIT-13)}, booktitle = {2013 IEEE International Conference on Industrial Technologies (ICIT-13)}, publisher = {IEEE}, address = {Piscataway, NJ}, organization = {International Conference on Industrial Technologies <2013, Cape Town>}, isbn = {978-1-4673-4567-5 ; 978-1-4673-4569-9}, pages = {1982 -- 1987}, year = {2013}, language = {en} } @incollection{Schmidt2013, author = {Schmidt, Herbert}, title = {Finanzierungspartnerwahl durch mittelst{\"a}ndische Unternehmen}, series = {Innovation durch Kooperation : wie der Mittelstand durch Zusammenarbeit mit den Hochschulen seine Wettbewerbsf{\"a}higkeit steigert ; Festschrift f{\"u}r Prof. Dr. rer. nat. Johannes Gartzen / Thomas Gartzen, Ute Gartzen (Hrsg.)}, booktitle = {Innovation durch Kooperation : wie der Mittelstand durch Zusammenarbeit mit den Hochschulen seine Wettbewerbsf{\"a}higkeit steigert ; Festschrift f{\"u}r Prof. Dr. rer. nat. Johannes Gartzen / Thomas Gartzen, Ute Gartzen (Hrsg.)}, publisher = {Apprimus Verlag}, address = {Aachen}, isbn = {978-3-86359-136-6}, pages = {163 -- 166}, year = {2013}, language = {de} } @inproceedings{FateriGebhardtKhosravi2013, author = {Fateri, Miranda and Gebhardt, Andreas and Khosravi, Maziar}, title = {Experimental investigation of selective laser melting of lunar regolith for in-situ applications}, series = {ASME 2013 International Mechanical Engineering Congress and Exposition : San Diego, California, USA, November 15-21, 2013. Vol. 2A: Advanced manufacturing}, booktitle = {ASME 2013 International Mechanical Engineering Congress and Exposition : San Diego, California, USA, November 15-21, 2013. Vol. 2A: Advanced manufacturing}, publisher = {ASME}, organization = {American Society of Mechanical Engineers}, isbn = {978-0-7918-5618-5}, pages = {V02AT02A008}, year = {2013}, language = {en} } @phdthesis{Pfaff2013, author = {Pfaff, Raphael}, title = {Evaluation and extension of the potential for application of the behavioural framework to practical engineering problems}, pages = {XVI, 231 S.}, year = {2013}, language = {en} } @article{FateriHoetterGebhardt2012, author = {Fateri, Miranda and H{\"o}tter, Jan-Steffen and Gebhardt, Andreas}, title = {Experimental and Theoretical Investigation of Buckling Deformation of Fabricated Objects by Selective Laser Melting}, series = {Physics Procedia}, volume = {39}, journal = {Physics Procedia}, publisher = {Elsevier}, address = {Amsterdam}, issn = {1875-3892}, doi = {10.1016/j.phpro.2012.10.062}, pages = {464 -- 470}, year = {2012}, abstract = {Although Selective Laser Melting (SLM) process is an innovative manufacturing method, there are challenges such as inferior mechanical properties of fabricated objects. Regarding this, buckling deformation which is caused by thermal stress is one of the undesired mechanical properties which must be alleviated. As buckling deformation is more observable in hard to process materials, silver is selected to be studied theoretically and experimentally for this paper. Different scanning strategies are utilized and a Finite Element Method (FEM) is applied to calculate the temperature gradient in order to determine its effect on the buckling deformation of the objects from experiments.}, language = {en} } @article{HoetterFateriGebhardt2012, author = {H{\"o}tter, Jan-Steffen and Fateri, Miranda and Gebhardt, Andreas}, title = {Prozessoptimierung des SLM-Prozesses mit hoch-reflektiven und thermisch sehr gut leitenden Materialien durch systematische Parameterfindung und begleitende Simulationen am Beispiel von Silber}, series = {RTejournal - Forum f{\"u}r Rapid Technologie}, volume = {9}, journal = {RTejournal - Forum f{\"u}r Rapid Technologie}, number = {1}, publisher = {Fachhoschule Aachen}, address = {Aachen}, issn = {1614-0923}, url = {http://nbn-resolving.de/urn:nbn:de:0009-2-33639}, pages = {1 -- 14}, year = {2012}, abstract = {Additive Manufacturing durch Aufschmelzen von Metallpulvern hat sich auf breiter Front als Herstellverfahren, auch f{\"u}r Endprodukte, etabliert. Besonders f{\"u}r die Variante des Selective Laser Melting (SLM) sind Anwendungen in der Zahntechnik bereits weit verbreitet und der Einsatz in sensitiven Branchen wie der Luftfahrt ist in greifbare N{\"a}he ger{\"u}ckt. Deshalb werden auch vermehrt Anstrengungen unternommen, um bisher nicht verarbeitete Materialien zu qualifizieren. Dies sind vorzugsweise Nicht-Eisen- und Edelmetalle, die sowohl eine sehr hohe Reflektivit{\"a}t als auch eine sehr gute W{\"a}rmeleitf{\"a}higkeit aufweisen - beides Eigenschaften, die die Beherrschung des Laser-Schmelzprozesses erschweren und nur kleine Prozessfenster zulassen. Die Arbeitsgruppe SLM des Lehr- und Forschungsgebietes Hochleistungsverfahren der Fertigungstechnik hat sich unter der Randbedingung einer kleinen und mit geringer Laserleistung ausgestatteten SLM Maschine der Aufgabe gewidmet und am Beispiel von Silber die Parameterfelder f{\"u}r Einzelspuren und wenig komplexe Geometrien systematisch untersucht. Die Arbeiten wurden von FEM Simulationen begleitet und durch metallographische Untersuchungen verifiziert. Die Ergebnisse bilden die Grundlage zur schnellen Parameterfindung bei komplexen Geometrien und bei Ver{\"a}nderungen der Zusammensetzung, wie sie bei zuk{\"u}nftigen Legierungen zu erwarten sind. Die Ergebnisse werden exemplarisch auf unterschiedliche Geometrien angewandt und entsprechende Bauteile gezeigt.}, language = {de} } @inproceedings{FerreinKallweitLautermann2012, author = {Ferrein, Alexander and Kallweit, Stephan and Lautermann, Mark}, title = {Towards an autonomous pilot system for a tunnel boring machine}, series = {5th Robotics and Mechatronics Conference of South Africa (ROBMECH) : 26 - 27 November 2012 ; CSIR International Conference Centre Gauteng South Africa}, booktitle = {5th Robotics and Mechatronics Conference of South Africa (ROBMECH) : 26 - 27 November 2012 ; CSIR International Conference Centre Gauteng South Africa}, publisher = {IEEE}, address = {Piscataway, NJ}, isbn = {978-1-4673-5183-6}, year = {2012}, language = {en} } @inproceedings{ReisgenSchleserSchoeneetal.2012, author = {Reisgen, Uwe and Schleser, Markus and Schoene, Jens and Hegger, Josef and Gallwoszus, J{\"o}rg and Feldmann, Markus and Kopp, Maik and G{\"u}ndel, Max}, title = {Investigation on bond mechanisms of innovative small-scale shear connectors between steel and concrete}, series = {Bond in concrete 2012. Vol. 2. Bond in new materials and under severe conditions}, booktitle = {Bond in concrete 2012. Vol. 2. Bond in new materials and under severe conditions}, editor = {Cairns, John W.}, publisher = {Publisher creations}, address = {Manerbio, Brescia}, isbn = {978-88-907078-3-4}, pages = {893 -- 898}, year = {2012}, language = {en} } @article{ReisgenSchleserMokrovetal.2012, author = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Ahmed, Essam}, title = {Statistical modeling of laser welding of DP/TRIP steel sheets}, series = {Optics and laser technology}, volume = {44}, journal = {Optics and laser technology}, number = {1}, publisher = {Elsevier}, address = {Amsterdam}, issn = {1879-2545 (E-Journal); 0030-3992 (Print); 0308-4280 (Print)}, doi = {10.1016/j.optlastec.2011.05.025}, pages = {92 -- 101}, year = {2012}, abstract = {In this research work, a statistical analysis of the CO2 laser beam welding of dual phase (DP600)/transformation induced plasticity (TRIP700) steel sheets was done using response surface methodology. The analysis considered the effect of laser power (2-2.2 kW), welding speed (40-50 mm/s) and focus position (-1 to 0 mm) on the heat input, the weld bead geometry, uniaxial tensile strength, formability limited dome height and welding operation cost. The experimental design was based on Box-Behnken design using linear and quadratic polynomial equations for predicting the mathematical models. The results indicate that the proposed models predict the responses adequately within the limits of welding parameters being used and the welding speed is the most significant parameter during the welding process.}, language = {en} } @article{ReisgenSchleserMokrovetal.2012, author = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Ahmed, Essam}, title = {Optimization of laser welding of DP/TRIP steel sheets using statistical approach}, series = {Optics and laser technology}, volume = {44}, journal = {Optics and laser technology}, number = {1}, publisher = {Elsevier}, address = {Amsterdam}, issn = {1879-2545 (E-Journal); 0030-3992 (Print); 0308-4280 (Print)}, doi = {10.1016/j.optlastec.2011.06.028}, pages = {255 -- 262}, year = {2012}, abstract = {Generally, the quality of a weld joint is directly influenced by the welding input parameter settings. Selection of proper process parameters is important to obtain the desired weld bead profile and quality. In this research work, numerical and graphical optimization techniques of the CO2 laser beam welding of dual phase (DP600)/transformation induced plasticity (TRIP700) steel sheets were carried out using response surface methodology (RSM) based on Box-Behnken design. The procedure was established to improve the weld quality, increase the productivity and minimize the total operation cost by considering the welding parameters range of laser power (2-2.2 kW), welding speed (40-50 mm/s) and focus position (-1 to 0 mm). It was found that, RSM can be considered as a powerful tool in experimental welding optimization, even when the experimenter does not have a model for the process. Strong, efficient and low cost weld joints could be achieved using the optimum welding conditions.}, language = {en} } @article{ReisgenOlschokJakobsetal.2012, author = {Reisgen, Uwe and Olschok, Simon and Jakobs, Stefan and Schleser, Markus and Mokrov, Oleg and Rossiter, Eduardo}, title = {Laser beam submerged arc hybrid welding}, series = {Physics procedia}, volume = {39}, journal = {Physics procedia}, publisher = {Elsevier}, address = {Amsterdam}, issn = {1875-3892}, doi = {10.1016/j.phpro.2012.10.016}, pages = {75 -- 83}, year = {2012}, abstract = {The laser beam-submerged arc hybrid welding method originates from the knowledge that, with increasing penetration depth, the laser beam process has a tendency to pore formation in the lower weld regions. The coupling with the energy-efficient submerged-arc process improves degassing and reduces the tendency to pore formation. The high deposition rate of the SA process in combination with the laser beam process offers, providing the appropriate choice of weld preparation, the possibility of welding plates with a thickness larger than 20° mm in a single pass, and also of welding thicker plates with the double-sided single pass technique.}, language = {en} } @inproceedings{ReisgenSchleserMokrovetal.2012, author = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Ufer, Sebastian and Guenel, Ismet and Gach, Stefan}, title = {Voruntersuchungen mit Ansys CFX zu einer Druckstufe von einem Druckstufensystem f{\"u}r das Elektronenstrahlschweißen}, series = {DVS Congress 2012 : Große Schweißtechnische Tagung, DVS-Studentenkongress ; Vortr{\"a}ge der Veranstaltungen in Saarbr{\"u}cken am 17. und 18. September 2012. (DVS-Berichte ; 286)}, booktitle = {DVS Congress 2012 : Große Schweißtechnische Tagung, DVS-Studentenkongress ; Vortr{\"a}ge der Veranstaltungen in Saarbr{\"u}cken am 17. und 18. September 2012. (DVS-Berichte ; 286)}, publisher = {DVS Media}, address = {D{\"u}sseldorf}, organization = {Deutscher Verband f{\"u}r Schweißen und Verwandte Verfahren ; Große Schweißtechnische Tagung <2012, Saarbr{\"u}cken>}, isbn = {978-3-87155-593-0}, pages = {33 -- 35}, year = {2012}, language = {de} } @inproceedings{ReisgenSchleserThiele2012, author = {Reisgen, Uwe and Schleser, Markus and Thiele, Regina}, title = {Schweißverbindungen in Lithium-Ionen-Batterien}, series = {DVS Congress 2012 : Große Schweißtechnische Tagung, DVS-Studentenkongress ; Vortr{\"a}ge der Veranstaltungen in Saarbr{\"u}cken am 17. und 18. September 2012. (DVS-Berichte ; 286)}, booktitle = {DVS Congress 2012 : Große Schweißtechnische Tagung, DVS-Studentenkongress ; Vortr{\"a}ge der Veranstaltungen in Saarbr{\"u}cken am 17. und 18. September 2012. (DVS-Berichte ; 286)}, publisher = {DVS-Media}, address = {D{\"u}sseldorf}, organization = {Große Schweißtechnische Tagung <2012, Saarbr{\"u}cken> ; Deutscher Verband f{\"u}r Schweißen und Verwandte Verfahren}, isbn = {978-3-87155-593-0}, pages = {157 -- 161}, year = {2012}, language = {de} } @inproceedings{ReisgenSchleserEssersetal.2012, author = {Reisgen, Uwe and Schleser, Markus and Essers, Marc and Thiele, Regina and Schiebahn, Alexander}, title = {Klebstofffixiertes R{\"u}hrreibschweißen von d{\"u}nnen Aluminiumblechen}, series = {DVS Congress 2012 : Große Schweißtechnische Tagung, DVS-Studentenkongress ; Vortr{\"a}ge der Veranstaltungen in Saarbr{\"u}cken am 17. und 18. September 2012. (DVS-Berichte ; 286)}, booktitle = {DVS Congress 2012 : Große Schweißtechnische Tagung, DVS-Studentenkongress ; Vortr{\"a}ge der Veranstaltungen in Saarbr{\"u}cken am 17. und 18. September 2012. (DVS-Berichte ; 286)}, publisher = {DVS-Media}, address = {D{\"u}sseldorf}, organization = {Große Schweißtechnische Tagung <2012, Saarbr{\"u}cken> ; Deutscher Verband f{\"u}r Schweißen und Verwandte Verfahren}, isbn = {978-3-87155-593-0}, pages = {20 -- 25}, year = {2012}, language = {de} } @article{ReisgenSchleserAbdurakhmanovetal.2012, author = {Reisgen, Uwe and Schleser, Markus and Abdurakhmanov, Aydemir and Gumenyuk, Andrey}, title = {Measuring of plasma properties induced by non-vacuum electron beam welding}, series = {Physics of plasma}, volume = {19}, journal = {Physics of plasma}, number = {1}, publisher = {AIP Publishing}, address = {Melville, NY}, issn = {1089-7674 (E-Journal); 1070-664X (Print)}, doi = {10.1063/1.3675874}, pages = {1 -- 7}, year = {2012}, abstract = {Electron beam plasma measurement was realised by means of DIABEAM system invented by ISF RWTH Aachen. The Langmuir probe method is used for measurement. The relative simplicity of the method and the possibility of dispersion of high power on the probe allow its application for the investigation of high-power electron beams. The key element of the method is a rotating thin tungsten wire, which intersects the beam transversely on its axis and collects part of the current by itself. The signals, which are registered in the DIABEAM as a voltage, were taken in the form of amplitude. The conversion of the probe current into the distribution along the beam radius was realised using the Abel's method. A voltage-current characteristic was built for the beam current. The local electron density as well as the electron temperature, the floating potential and the plasma potential were measured and calculated by means of this characteristic.}, language = {en} } @article{ReisgenSchleserMokrovetal.2012, author = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Zabirov, Alexander and F{\"u}ssel, Uwe and Schnick, Michael and Hertel, Martin and Jaeckel, Sebastian}, title = {Modellierung und Visualisierung der MSG-Lichtbogenprozesse}, series = {Schweissen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren}, volume = {64}, journal = {Schweissen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren}, number = {4}, publisher = {DVS Verlag}, address = {D{\"u}sseldorf}, issn = {0036-7184}, pages = {166 -- 174}, year = {2012}, language = {de} } @inproceedings{HartmannKallweitFeldusenetal.2012, author = {Hartmann, Axel and Kallweit, Stephan and Feldusen, Antje and Schr{\"o}der, Wolfgang}, title = {Detection of upstream propagating sound waves at buffet flow using high-speed PIV}, pages = {14 S. : graph. Darst.}, year = {2012}, language = {en} } @article{ScheikSchleserReisgen2012, author = {Scheik, Sven and Schleser, Markus and Reisgen, Uwe}, title = {Thermisches Direktf{\"u}gen von Metall und Kusntstoff: eine Alternative zur Klebtechnik}, series = {Adh{\"a}sion : Kleben \& Dichten}, volume = {56}, journal = {Adh{\"a}sion : Kleben \& Dichten}, number = {11}, publisher = {Springer Vieweg}, address = {Wiesbaden}, issn = {0001-8198 (E-Journal); 0001-8198 (Print)}, doi = {10.1007/s35145-012-0005-x}, pages = {36 -- 40}, year = {2012}, abstract = {Im Rahmen des Exzellenzclusters „Integrative Produktionstechnik f{\"u}r Hochlohnl{\"a}nder" der RWTHAachen University werden derzeit alternative Verfahren zur Herstellung von Metall/Kunststoff- Verbindungen untersucht. Eines davon ist das thermische Direktf{\"u}gen, das eine stoffschl{\"u}ssige Verbindung zwischen Kunststoff und Metall erm{\"o}glicht und ohne die Verwendung von Klebstoffen, Haftvermittlern oder mechanischen Verbindungshilfen auskommt.}, language = {de} } @inproceedings{ReisgenSchleserMokrovetal.2012, author = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Schmidt, Andre}, title = {SimWeld - 10 Jahre Schweißprozesssimulation im ISF}, series = {Entwicklung und Evolution von Forschungssoftware : Tagungsband des Workshops, Rolduc, November 2011. (Aachener Informatik-Berichte, Software-Engineering ; Bd. 14)}, booktitle = {Entwicklung und Evolution von Forschungssoftware : Tagungsband des Workshops, Rolduc, November 2011. (Aachener Informatik-Berichte, Software-Engineering ; Bd. 14)}, editor = {Rumpe, Bernhard and Lichter, Horst}, publisher = {Shaker}, address = {Aachen}, isbn = {978-3-8440-1600-0}, pages = {55 -- 62}, year = {2012}, language = {de} } @inproceedings{QuadfliegSchoeneSchleseretal.2012, author = {Quadflieg, Till and Schoene, Jens and Schleser, Markus and Jockenh{\"o}vel, Stefan and Reisgen, Uwe and Gries, Thomas}, title = {Shear connectors for hybrid joints of metal and FRP}, series = {Diversity in composites : conference proceedings : Composites Australia and CRC-ACS 2012 conference}, booktitle = {Diversity in composites : conference proceedings : Composites Australia and CRC-ACS 2012 conference}, editor = {Heslehurst, Rikard Benton}, publisher = {Composites Australia}, address = {Hawthorne}, isbn = {978-0-9873285-0-2}, pages = {[152] -- [160]}, year = {2012}, language = {en} } @inproceedings{ScheikReisgenSchleseretal.2012, author = {Scheik, Sven and Reisgen, Uwe and Schleser, Markus and Huber, Frederic}, title = {Untersuchungen zum dehnungsbasierten Versagen von geklebten, oberfl{\"a}chenveredelten Blechen im Zugscherversuch}, series = {2. Doktorandenseminar Klebtechnik : Vortr{\"a}ge der gleichnamigen Veranstaltung in Dresden am 5. und 6. September 2011}, booktitle = {2. Doktorandenseminar Klebtechnik : Vortr{\"a}ge der gleichnamigen Veranstaltung in Dresden am 5. und 6. September 2011}, publisher = {DVS-Media}, address = {D{\"u}sseldorf}, organization = {Institut f{\"u}r Schweißtechnik und F{\"u}getechnik Aachen> ; Doktorandenseminar Klebtechnik <2, 2011, Dresden>}, isbn = {978-3-87155-599-2}, pages = {73 -- 78}, year = {2012}, language = {de} } @inproceedings{ScheikReisgenSchleseretal.2012, author = {Scheik, Sven and Reisgen, Uwe and Schleser, Markus and Huber, Frederic}, title = {Untersuchungen zum dehnungsbasierten Versagen von geklebten, oberfl{\"a}chenveredelten Blechen im Zugscherversuch}, series = {2. Doktorandenseminar Klebtechnik : Vortr{\"a}ge der gleichnamigen Veranstaltung in Dresden am 5. und 6. September 2011. (DVS-Berichte ; 292)}, booktitle = {2. Doktorandenseminar Klebtechnik : Vortr{\"a}ge der gleichnamigen Veranstaltung in Dresden am 5. und 6. September 2011. (DVS-Berichte ; 292)}, publisher = {DVS Media}, address = {D{\"u}sseldorf}, organization = {Doktorandenseminar Klebtechnik <2, 2011, Dresden> ; Institut f{\"u}r Schweißtechnik und F{\"u}getechnik }, isbn = {978-3-87155-599-2}, pages = {73 -- 78}, year = {2012}, language = {de} } @inproceedings{SchoeneReisgenSchleser2012, author = {Schoene, Jens and Reisgen, Uwe and Schleser, Markus}, title = {Verbundverhalten der polymeren Interphase in textibewehrtem Beton}, series = {2. Doktorandenseminar Klebtechnik : Vortr{\"a}ge der gleichnamigen Veranstaltung in Dresden am 5. und 6. September 2011. (DVS-Berichte ; 292)}, booktitle = {2. Doktorandenseminar Klebtechnik : Vortr{\"a}ge der gleichnamigen Veranstaltung in Dresden am 5. und 6. September 2011. (DVS-Berichte ; 292)}, publisher = {DVS-Media}, address = {D{\"u}sseldorf}, organization = {Doktorandenseminar Klebtechnik <2, 2011, Dresden> ; Institut f{\"u}r Schweißtechnik und F{\"u}getechnik }, isbn = {978-3-87155-599-2}, pages = {50 -- 56}, year = {2012}, language = {de} } @article{ReisgenSchleserMokrovetal.2012, author = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Zabirov, Alexander and F{\"u}ssel, Uwe and Schnick, Michael and Hertel, Martin and Jaeckel, Sebastian}, title = {Modelling and visualisation of the GMA process}, series = {Welding and Cutting}, volume = {11}, journal = {Welding and Cutting}, number = {4}, publisher = {DVS Verlag}, address = {D{\"u}sseldorf}, issn = {1612-3433}, pages = {242 -- 249}, year = {2012}, language = {en} } @inproceedings{ReisgenSchleserAbdurakhmanovetal.2012, author = {Reisgen, Uwe and Schleser, Markus and Abdurakhmanov, Aydemir and Gumenyuk, Andrej}, title = {Application of electron beam welding to fabrication of steel-aluminium dissimilar joint}, series = {Beam technologies \& laser application : proceedings of the VII international conference, Saint Petersburg, Sept. 18-21, 2012}, booktitle = {Beam technologies \& laser application : proceedings of the VII international conference, Saint Petersburg, Sept. 18-21, 2012}, publisher = {Publ. House}, address = {Saint Petersburg}, pages = {265 -- 279}, year = {2012}, language = {en} } @article{HoetterFateriGebhardt2012, author = {H{\"o}tter, Jan-Steffen and Fateri, Miranda and Gebhardt, Andreas}, title = {Selective laser melting of metals: desktop machines open up new chances even for small companies}, series = {Advanced materials research}, volume = {622-623}, journal = {Advanced materials research}, publisher = {Trans Tech Publ.}, address = {Baech}, issn = {1662-8985 (E-Journal); 1022-6680 (Print)}, doi = {10.4028/www.scientific.net/AMR.622-623.461}, pages = {461 -- 465}, year = {2012}, abstract = {Additive manufacturing (AM) of metal parts by using Selective Laser Melting (SLM) has become a powerful tool mostly in the area of automotive, aerospace engineering and others. Especially in the field of dentistry, jewelry and related branches that require individualized or even one-of-a-kind products, the direct digital manufacturing process opens up new ways of design and manufacturing. In these fields, mostly small and medium sized businesses (SME) are operating which do not have sufficient human and economic resources to invest in this technology. But to stay competitive, the application of AM can be regarded as a necessity. In this situation a new desktop machine (Realizer SLM 50) was introduced that cost about 1/3 of a shop floor SLM machine and promises small quality parts. To find out whether the machine really is an alternative for SMEs the University of Applied Science, Aachen, Germany, designed, build and optimized typical parts from the dentistry and the jewelry branches using CoCr and silver material, the latter being new with this application. The paper describes the SLM procedure and how to find and optimize the most important parameters. The test is accompanied by digital simulation in order to verify the build parameters and to plan future builds. The procedure is shown as well as the resulting parts made from CoCr and silver material.}, language = {en} } @book{Thomas2012, author = {Thomas, Axel}, title = {Rhetorische Knallfr{\"o}sche - reloaded : Zitatensammlung f{\"u}r Politik und Wirtschaft}, publisher = {Neck + Heyn}, address = {Aachen}, pages = {201 S. : Ill.}, year = {2012}, language = {de} } @article{LeidingerNoistenWollert2012, author = {Leidinger, Rafael and Noisten, Thomas and Wollert, J{\"o}rg}, title = {Realtime automation networks in moVing industrial environments}, series = {Journal of systemics, cybernetics and informatics}, volume = {Vol. 10}, journal = {Journal of systemics, cybernetics and informatics}, number = {Iss. 2}, publisher = {IIIC}, address = {Orlando}, issn = {1690-4532}, pages = {52 -- 56}, year = {2012}, abstract = {The radio-based wireless data communication has made the realization of new technical solutions possible in many fields of the automation technology (AT). For about ten years, a constant disproportionate growth of wireless technologies can be observed in the automation technology. However, it shows that especially for the AT, conventional technologies of office automation are unsuitable and/or not manageable. The employment of mobile services in the industrial automation technology has the potential of significant cost and time savings. This leads to an increased productivity in various fields of the AT, for example in the factory and process automation or in production logistics. In this paper technologies and solutions for an automation-suited supply of mobile wireless services will be introduced under the criteria of real time suitability, IT-security and service orientation. Emphasis will be put on the investigation and development of wireless convergence layers for different radio technologies, on the central provision of support services for an easy-to-use, central, backup enabled management of combined wired / wireless networks and on the study on integrability in a Profinet real-time Ethernet network.}, language = {en} } @inproceedings{Wollert2012, author = {Wollert, J{\"o}rg}, title = {The performance of UWB-communication in an industrial environment}, series = {IEEE 1st International Symposium on Wireless Systems : (IDAACS-SWS) : Offenburg, 20-21 Sept. 2012}, booktitle = {IEEE 1st International Symposium on Wireless Systems : (IDAACS-SWS) : Offenburg, 20-21 Sept. 2012}, publisher = {IEEE}, address = {Piscataway, NJ}, organization = {International Symposium on Wireless Systems <1, 2012, Offenburg>}, isbn = {978-1-4673-4678-8}, doi = {10.1109/IDAACS-SWS.2012.6377639}, pages = {85 -- 90}, year = {2012}, language = {en} } @inproceedings{WollertRau2012, author = {Wollert, J{\"o}rg and Rau, S.}, title = {Performance von embedded WLAN-Systemen bei koexistierenden Netzwerken}, series = {KOMMA 2012 : Kommunikation in der Automation : 3. Jahreskolloquium Kommunikation in der Automation : Lemgo, 14.11.2012 / J{\"u}rgen Jasperneite ... (Hrsg.)}, booktitle = {KOMMA 2012 : Kommunikation in der Automation : 3. Jahreskolloquium Kommunikation in der Automation : Lemgo, 14.11.2012 / J{\"u}rgen Jasperneite ... (Hrsg.)}, publisher = {Inst. f{\"u}r Industrielle Informationstechnik}, address = {Lemgo}, organization = {Jahreskolloquium Kommunikation in der Automation <3, 2012, Lemgo>}, isbn = {978-3-9814062-2-1}, pages = {1 CD-ROM}, year = {2012}, language = {de} } @incollection{WollertRau2012, author = {Wollert, J{\"o}rg and Rau, Sebastian}, title = {Energietransparenz und optimierter Energieverbrauch durch ganzheitliche Automatisierungskonzepte}, series = {Smart Energy 2012 : wie smart ist der Weg zur Energiewende? / Uwe Großmann, Ingo Kunold (Hrsg.)}, booktitle = {Smart Energy 2012 : wie smart ist der Weg zur Energiewende? / Uwe Großmann, Ingo Kunold (Hrsg.)}, publisher = {H{\"u}lsbusch}, address = {Gl{\"u}ckstadt}, isbn = {978-3-86488-030-8}, pages = {109 -- 122}, year = {2012}, language = {de} } @article{Gartzen2011, author = {Gartzen, Johannes}, title = {Sp{\"a}tes Aufwachen aus dem Dornr{\"o}schenschlaf: Ohne Energie l{\"a}uft nichts}, series = {Aachener Nachrichten (2011)}, journal = {Aachener Nachrichten (2011)}, publisher = {Zeitungsverl. Aachen}, address = {Aachen}, pages = {22}, year = {2011}, language = {de} } @book{Gebhardt2011, author = {Gebhardt, Andreas}, title = {Understanding Additive Manufacturing : Rapid Prototyping - Rapid Tooling - Rapid Manufacturing}, publisher = {Hanser}, address = {M{\"u}nchen}, isbn = {978-3-446-42552-1}, pages = {VIII, 164 S. : farb. Ill.}, year = {2011}, language = {en} } @article{KallweitKorculaninFroehligetal.2011, author = {Kallweit, Stephan and Korculanin, O. and Fr{\"o}hlig, F. and Gabi, M. and Mattern, P.}, title = {Photogrammetrische Rekonstruktion von Partikelpositionen mittels R{\"u}ckprojektion f{\"u}r 3D-PIV}, series = {Lasermethoden in der Str{\"o}mungsmesstechnik : 19. Fachtagung, 6. - 8. September 2011, Ilmenau ; [Tagungsband enth{\"a}lt ... Beitr{\"a}ge, die anl{\"a}sslich der 19. Fachtagaung "Lasermethoden in der Str{\"o}mungsmesstechnik" ... vorgetragen und diskutiert wurden] / veranst. von der Deutschen Gesellschaft f{\"u}r Laser-Anemometrie GALA e.V. Hrsg. A. Thess...}, journal = {Lasermethoden in der Str{\"o}mungsmesstechnik : 19. Fachtagung, 6. - 8. September 2011, Ilmenau ; [Tagungsband enth{\"a}lt ... Beitr{\"a}ge, die anl{\"a}sslich der 19. Fachtagaung "Lasermethoden in der Str{\"o}mungsmesstechnik" ... vorgetragen und diskutiert wurden] / veranst. von der Deutschen Gesellschaft f{\"u}r Laser-Anemometrie GALA e.V. Hrsg. A. Thess...}, publisher = {Dt. Ges. f{\"u}r Laser-AnemometrieGALA e. V.}, address = {Karlsruhe}, isbn = {978-3-9805613-7-2}, pages = {28/1 -- 28/6}, year = {2011}, language = {de} } @inproceedings{Klocke2011, author = {Klocke, Martina}, title = {Projektmodul im Bachelorstudiengang Maschinenbau bzw. Mechatronik}, series = {Hochschulrektorenkonferenz HRK nexus : Kompetenzorientiertes Pr{\"u}fen in den Ingenieurwissenschaften und in der Informatik. Gemeinsame Tagung von 4ING und nexus. 29.3.2011 Bremen}, booktitle = {Hochschulrektorenkonferenz HRK nexus : Kompetenzorientiertes Pr{\"u}fen in den Ingenieurwissenschaften und in der Informatik. Gemeinsame Tagung von 4ING und nexus. 29.3.2011 Bremen}, pages = {1 -- 25}, year = {2011}, language = {de} } @inproceedings{ReisgenSchleserMokrovetal.2011, author = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Zabirov, Alexander}, title = {Simulation des Tropfen{\"u}bergangs beim MSG-Impulslichtbogenschweißen}, series = {Große Schweißtechnische Tagung 2011 : Studentenkongress 2011, Abschlusskolloquium Lichtbogenschweißen 2011; Vortr{\"a}ge der Veranstaltung in Hamburg}, booktitle = {Große Schweißtechnische Tagung 2011 : Studentenkongress 2011, Abschlusskolloquium Lichtbogenschweißen 2011; Vortr{\"a}ge der Veranstaltung in Hamburg}, publisher = {DVS-Media}, address = {D{\"u}sseldorf}, organization = {Deutscher Verband f{\"u}r Schweißen und Verwandte Verfahren ; Große Schweißtechnische Tagung <2011, Hamburg>}, isbn = {978-3-87155-267-0}, pages = {554 -- 559}, year = {2011}, language = {de} } @misc{SchoeneGlowaniaSchleseretal.2011, author = {Schoene, Jens and Glowania, Michael and Schleser, Markus and Gries, Thomas and Reisgen, Uwe}, title = {Betonteil und Verfahren zum Bewehren von Teilen aus Beton / Offenlegungsschrift}, publisher = {Dt. Patent- und Markenamt}, address = {M{\"u}nchen}, pages = {6 S. : graph. Darst.}, year = {2011}, language = {de} } @incollection{HirtBleckBobzinetal.2011, author = {Hirt, Gerhard and Bleck, Wolfgang and Bobzin, Kirsten and Schleser, Markus and [u.a.],}, title = {Hybride Produktionssysteme}, series = {Integrative Produktionstechnik f{\"u}r Hochlohnl{\"a}nder / hrsg. von Christian Brecher}, booktitle = {Integrative Produktionstechnik f{\"u}r Hochlohnl{\"a}nder / hrsg. von Christian Brecher}, publisher = {Springer}, address = {Berlin [u.a.]}, isbn = {978-3-642-20692-4 (Print) ; 978-3-642-20693-1 (E-Book)}, doi = {10.1007/978-3-642-20693-1_5}, pages = {465 -- 745}, year = {2011}, abstract = {W{\"a}hrend die virtuelle Produktentstehungskette große Gestaltungsfreir{\"a}ume bietet, ist die reale Produktentstehungskette durch wesentlich mehr Randbedingungen gekennzeichnet, die nicht oder nur ansatzweise beeinflussbar sind. Die Realisierung des aus logistischer Sicht optimalen One-Piece-Flow bei gleichzeitiger Steigerung von Flexibilit{\"a}t und Produktivit{\"a}t sowie des Verschiebens der Grenze des technologisch Machbaren m{\"u}ssen in zuk{\"u}nftigen Forschungsans{\"a}tzen gleichermaßen betrachtet werden. Die Grenzverschiebung auf Basis der Integration von Technologien ist dabei ein viel versprechender Ansatz, der es in vielen F{\"a}llen erm{\"o}glicht, in allen genannten Zielrichtungen gleichermaßen Potentiale zu erschließen.}, language = {de} } @inproceedings{SchoeneReisgenSchleseretal.2011, author = {Schoene, Jens and Reisgen, Uwe and Schleser, Markus and Jerabek, Jakub}, title = {Theoretische und experimentelle Untersuchung des spaltungsinduzierten Versagens von TRC Pr{\"u}fk{\"o}rpern}, series = {Textilbeton - Theorie und Praxis : Tagungsband zum 6. Kolloquium zu textilbewehrten Tragwerken (CTRS6); gemeinsames Abschlusskolloquium der Sonderforschungsbereiche 528 (Dresden) und 532 (Aachen), Berlin 19.9.2011 - 20.9.2011}, booktitle = {Textilbeton - Theorie und Praxis : Tagungsband zum 6. Kolloquium zu textilbewehrten Tragwerken (CTRS6); gemeinsames Abschlusskolloquium der Sonderforschungsbereiche 528 (Dresden) und 532 (Aachen), Berlin 19.9.2011 - 20.9.2011}, editor = {Curbach, Manfred}, publisher = {Techn. Univ.}, address = {Dresden}, isbn = {978-3-86780-245-1}, pages = {73 -- 84}, year = {2011}, language = {de} } @article{MukherjeeRamazaniYangetal.2011, author = {Mukherjee, Krishnendu and Ramazani, Ali and Yang, Li and Prahl, Ulrich and Bleck, Wolfgang and Reisgen, Uwe and Schleser, Markus and Abdurakhmanov, Aydemir}, title = {Characterization of gas metal arc welded hot rolled DP600 steel}, series = {Steel research international}, volume = {Vol. 82}, journal = {Steel research international}, number = {Iss. 12}, publisher = {Wiley}, address = {Weinheim}, issn = {1869-344X (E-Book); 1611-3683 (Print)}, pages = {1408 -- 1416}, year = {2011}, language = {en} } @inproceedings{ReisgenSchleserAbdurakhmanovetal.2011, author = {Reisgen, Uwe and Schleser, Markus and Abdurakhmanov, Aydemir and Turichin, Gleb and Valdaitseva, Elena and Bach, Friedrich-Wilhelm and Hassel, Thomas and Beniyashi, Alexander}, title = {Investigation of factors for defect-free weld formation by non-vacuum electron beam welding}, series = {Laser technologies in welding and materials processing : proceedings of the fifth international conference, 24 - 27 May 2011, Katsiveli, Crimea, Ukraine}, booktitle = {Laser technologies in welding and materials processing : proceedings of the fifth international conference, 24 - 27 May 2011, Katsiveli, Crimea, Ukraine}, publisher = {Paton Publ. House}, address = {Kiev}, pages = {104 -- 109}, year = {2011}, language = {en} } @article{GlowaniaGriesSchoeneetal.2011, author = {Glowania, Michael and Gries, Thomas and Schoene, Jens and Schleser, Markus and Reisgen, Uwe}, title = {Innovative coating technology for textile reinforcements of concrete applications}, series = {13th International Congress on Polymers in Concrete : 10 - 12 February 2010, Funchal, Madeira, Portugal.(Key engineering materials. Vol. 466)}, journal = {13th International Congress on Polymers in Concrete : 10 - 12 February 2010, Funchal, Madeira, Portugal.(Key engineering materials. Vol. 466)}, publisher = {Trans Tech Publications}, address = {B{\"a}ch}, organization = {International Congress Polymers in Concrete <13, 2010, Funchal, Madeira>}, isbn = {978-3-03785-008-4}, issn = {1013-9826 (E-Journal) ; 0252-1059 (Print)}, pages = {167 -- 173}, year = {2011}, language = {en} } @article{ReisgenSchleserMokrovetal.2011, author = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Ahmed, Essam}, title = {Numerical and experimental investigation of tensile behavior of laser beam welded TRIP700 steel}, series = {ISIJ international}, volume = {Vol. 51}, journal = {ISIJ international}, number = {No. 3}, publisher = {ISIJ}, address = {Tōkyō}, organization = {Iron and Steel Institute of Japan (ISIJ)}, issn = {1347-5460 (E-Journal); 0915-1559 (Print)}, pages = {429 -- 434}, year = {2011}, language = {en} } @article{ReisgenSchleserHarmsetal.2011, author = {Reisgen, Uwe and Schleser, Markus and Harms, Alexander and Schiebahn, Alexander and Naumov, Andreas}, title = {Erweiterung des Parameterfelds zum R{\"u}hrreibschweißen mittels konduktiver Unterst{\"u}tzung}, series = {Schweissen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren}, volume = {Bd. 63}, journal = {Schweissen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren}, number = {H. 12}, publisher = {DVS-Media GmbH}, address = {D{\"u}sseldorf}, issn = {0036-7184}, pages = {710 -- 714}, year = {2011}, language = {de} } @inproceedings{ReisgenSchleserScheiketal.2011, author = {Reisgen, Uwe and Schleser, Markus and Scheik, Sven and Michaeli, Walter and Gr{\"o}nlund, Oliver and Neuß, Andreas and Wunderle, Johannes and Poprawe, Reinhart and R{\"o}sner, A. and Bobzin, Kirsten and Schl{\"a}fer, Thomas and Theiß, Sebastian and Kutschmann, Pia and Haberstroh, Edmund and Flock, Dustin and B{\"u}hrig-Polaczek, Andreas and Jakob, M.}, title = {Novel process chains for the production of plastics/metal-hybrids}, series = {17th International Conference on Concurrent Enterprising (ICE 2011) : Aachen, Germany, 20 - 22 June 2011}, booktitle = {17th International Conference on Concurrent Enterprising (ICE 2011) : Aachen, Germany, 20 - 22 June 2011}, editor = {Thoben, Klaus-Dieter}, publisher = {IEEE}, address = {Piscataway, NJ}, organization = {Forschungsinstitut f{\"u}r Rationalisierung ; International Conference on Concurrent Enterprising <17, 2011, Aachen>}, isbn = {978-1-457-70772-8 ; 978-3-943024-05-0}, pages = {596 -- 604}, year = {2011}, language = {en} } @article{ReisgenSchleserHarmsetal.2011, author = {Reisgen, Uwe and Schleser, Markus and Harms, Alexander and Schiebahn, Alexander and Thiele, Regina}, title = {Elektromobilit{\"a}t - Herausforderungen an die F{\"u}getechnik}, series = {mobilit{\"a}t morgen - Magazin zu Mobilit{\"a}t und Elektromobilit{\"a}t}, volume = {Jg. 1}, journal = {mobilit{\"a}t morgen - Magazin zu Mobilit{\"a}t und Elektromobilit{\"a}t}, number = {Nr. 2}, editor = {Kampker, Achim}, pages = {16 -- 17}, year = {2011}, language = {de} } @techreport{BleckReisgenSchleseretal.2011, author = {Bleck, Wolfgang and Reisgen, Uwe and Schleser, Markus and Prahl, Ulrich and Mukherjee, Krishnendu and Abdurakhmanov, Aydemir}, title = {Konsistentes Materialmodell f{\"u}r Umwandlung und mechanische Eigenschaften beim Schweißen hochfester Mehrphasen-St{\"a}hle : IGF-Vorhaben 15548 N. (FAT-Schriftenreihe ; 234)}, publisher = {VDA}, address = {Berlin}, organization = {Forschungsvereinigung Automobiltechnik}, pages = {XVI, 17 - 174 S. Ill., graph. Darst.}, year = {2011}, language = {de} } @article{RoesnerScheikOlowinskyetal.2011, author = {Roesner, Andreas and Scheik, Sven and Olowinsky, Alexander and Gillner, Arnold and Propawe, Reinhart and Schleser, Markus and Reisgen, Uwe}, title = {Innovative approach of joining hybrid components}, series = {Journal of laser applications}, volume = {Vol. 23}, journal = {Journal of laser applications}, number = {Iss. 3}, publisher = {Laser Institute of America}, address = {Orlando, Fla.}, issn = {1042-346X}, pages = {32007}, year = {2011}, language = {en} } @article{RoesnerScheikOlowinskyetal.2011, author = {Roesner, Andreas and Scheik, Sven and Olowinsky, Alexander and Gillner, Arnold and Reisgen, Uwe and Schleser, Markus}, title = {Laser assisted joining of plastic metal hybrids}, series = {Lasers in manufacturing 2011 : proceedings of the sixth International WLT Conference on Lasers in Manufacturing, Munich, May 23 - 26 2011. (Physics procedia ; Vol. 12 (2011), Part B)}, journal = {Lasers in manufacturing 2011 : proceedings of the sixth International WLT Conference on Lasers in Manufacturing, Munich, May 23 - 26 2011. (Physics procedia ; Vol. 12 (2011), Part B)}, publisher = {Elsevier}, address = {Amsterdam}, organization = {International WLT Conference on Lasers in Manufacturing <6, M{\"u}nchen, 2011>}, issn = {1875-3892 (E-Journal); 1875-3884 (Print)}, pages = {370 -- 377}, year = {2011}, language = {en} } @article{ReisgenSchleserMokrovetal.2011, author = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Zabirov, Alexander}, title = {Virtual welding equipment for simulation of GMAW processes with integration of power source regulation}, series = {Frontiers of materials science}, volume = {Vol. 5}, journal = {Frontiers of materials science}, number = {Iss. 2}, publisher = {Springer}, address = {Berlin}, issn = {2095-0268 (E-Journal); 2095-025X (Print)}, pages = {79 -- 89}, year = {2011}, language = {en} } @inproceedings{HuberBleckScheiketal.2011, author = {Huber, Fr{\´e}d{\´e}ric and Bleck, Wolfgang and Scheik, Sven and Schleser, Markus and Reisgen, Uwe}, title = {Investigation of galvanneal coating adherence in adhesive bonded joints using lap shear test}, series = {Galvatech 2011 : 8th International Conference on Zinc and Zinc Alloy Coated Steel Sheet, June 21 - 24, 2011, Genova (Italy) ; proceedings}, booktitle = {Galvatech 2011 : 8th International Conference on Zinc and Zinc Alloy Coated Steel Sheet, June 21 - 24, 2011, Genova (Italy) ; proceedings}, publisher = {Associazione Italiana di Metallurgia}, address = {Mailand}, organization = {International Conference on Zinc and Zinc Alloy Coated Steel Sheet <8, 2011, Genua>}, isbn = {978-88-85298-82-8}, pages = {Paper No. 43}, year = {2011}, language = {en} } @techreport{Schleser2011, author = {Schleser, Markus}, title = {Untersuchung des konduktiven R{\"u}hrreibschweißens an Stahl- und Aluminiumwerkstoffen. Schlussbericht. F{\"o}rderkennzeichen: AIF 15687 N}, pages = {87 S.}, year = {2011}, language = {de} } @inproceedings{PfaffLarkowskiBurnham2011, author = {Pfaff, Raphael and Larkowski, Tomasz and Burnham, Keith J.}, title = {An application of adaptive control in the behavioural framework}, series = {21st International Conference on Systems Engineering (ICSEng) : 16 - 18 Aug. 2011, Las Vegas, Nevada ; proceedings}, booktitle = {21st International Conference on Systems Engineering (ICSEng) : 16 - 18 Aug. 2011, Las Vegas, Nevada ; proceedings}, publisher = {IEEE}, address = {Piscataway, NJ}, organization = {International Conference on Systems Engineering <21, 2011, Las Vegas>}, isbn = {978-1-4577-1078-0 ; 978-0-7695-4495-3}, pages = {49 -- 54}, year = {2011}, language = {en} } @inproceedings{BudaWollert2011, author = {Buda, Aurel and Wollert, J{\"o}rg}, title = {Leistungsbewertung von Ultra Wideband Funktechnologien nach ECMA 368 f{\"u}r den Einsatz in industriellen Kommunikationssystemen}, series = {Kommunikation in der Automation : Magdeburg, 27. - 28.09.2011 ; 2. Jahreskolloquium Kommunikation in der Automation ; KOMMA 2011 / Ulrich Jumar ... (Hrsg.)}, booktitle = {Kommunikation in der Automation : Magdeburg, 27. - 28.09.2011 ; 2. Jahreskolloquium Kommunikation in der Automation ; KOMMA 2011 / Ulrich Jumar ... (Hrsg.)}, publisher = {ifak, Institut f{\"u}r Automation und Kommunikation e.V. Magdeburg an der Otto-von-Guericke-Universit{\"a}t Magdeburg}, address = {Magdeburg}, organization = {Jahreskolloquium Kommunikation in der Automation <2, 2011, Magdeburg>}, isbn = {978-3-940961-58-7}, pages = {1 CD-ROM}, year = {2011}, language = {de} } @inproceedings{StieglitzWollert2011, author = {Stieglitz, Kristian and Wollert, J{\"o}rg}, title = {Approach of using ultra-wideband-radio in industrial real-time ethernet networks}, series = {The 4th International Multi-Conference on Engineering and Technological Innovation : IMETI : July 19th - July 22nd, 2011, Orlando, Florida, USA}, booktitle = {The 4th International Multi-Conference on Engineering and Technological Innovation : IMETI : July 19th - July 22nd, 2011, Orlando, Florida, USA}, organization = {International Multi-Conference on Engineering and Technological Innovation <4, 2011, Orlando, Fla.>}, pages = {1 -- 6}, year = {2011}, language = {en} } @book{OPUS4-4303, title = {Ingenieurfreunde FH Aachen : 75 Jahre F{\"o}rderverein; Elektrotechnik und Informationstechnik, Luft- und Raumfahrttechnik, Maschinenbau und Mechatronik / [Hrsg.: Ingenieurfreunde FH Aachen e. V. ; Red.: H. J. Raatschen]}, editor = {Raatschen, Hans-J{\"u}rgen}, publisher = {Klinkenberg}, address = {Aachen}, isbn = {978-3-941704-03-9}, pages = {112 S. : Ill., graph. Darst.}, year = {2010}, language = {de} } @article{GebhardtSchmidtHoetteretal.2010, author = {Gebhardt, Andreas and Schmidt, Frank-Michael and H{\"o}tter, Jan-Steffen and Sokalla, Wolfgang and Sokalla, Patrick}, title = {Additive Manufacturing by selective laser melting the realizer desktop machine and its application for the dental industry}, series = {Physics Procedia}, volume = {5}, journal = {Physics Procedia}, number = {2}, isbn = {1875-3892}, pages = {543 -- 549}, year = {2010}, language = {en} } @incollection{Raatschen2010, author = {Raatschen, Hans-J{\"u}rgen}, title = {Von der K{\"o}niglichen H{\"o}heren Maschinenbauschule Aachen zu den Ingenieurfachbereichen der FH Aachen}, series = {Ingenieurfreunde FH Aachen : 75 Jahre F{\"o}rderverein; Elektrotechnik und Informationstechnik, Luft- und Raumfahrttechnik, Maschinenbau und Mechatronik}, booktitle = {Ingenieurfreunde FH Aachen : 75 Jahre F{\"o}rderverein; Elektrotechnik und Informationstechnik, Luft- und Raumfahrttechnik, Maschinenbau und Mechatronik}, publisher = {Klinkenberg}, address = {Aachen}, isbn = {978-3-941704-03-9}, pages = {13 -- 18}, year = {2010}, subject = {Geschichte}, language = {de} } @incollection{Raatschen2010, author = {Raatschen, Hans-J{\"u}rgen}, title = {75 Jahre Vereinsgeschichte}, series = {Ingenieurfreunde FH Aachen : 75 Jahre F{\"o}rderverein; Elektrotechnik und Informationstechnik, Luft- und Raumfahrttechnik, Maschinenbau und Mechatronik}, booktitle = {Ingenieurfreunde FH Aachen : 75 Jahre F{\"o}rderverein; Elektrotechnik und Informationstechnik, Luft- und Raumfahrttechnik, Maschinenbau und Mechatronik}, publisher = {Klinkenberg}, address = {Aachen}, isbn = {978-3-941704-03-9}, pages = {66 -- 72}, year = {2010}, subject = {Geschichte}, language = {de} } @inproceedings{ReisgenSchoeneSchleseretal.2010, author = {Reisgen, Uwe and Schoene, Jens and Schleser, Markus and Jerabek, Jakub and Keil, Allessandra}, title = {Theoretical and experimental investigations on textile-reinforced concrete spalling behavior}, series = {Textile reinforced concrete : 2nd ICTRC : International RILEM Conference on Material Science : Aachen Germany, September 6 - 8, 2010. Vol. 1. (RILEM Proceedings PRO ; 75)}, booktitle = {Textile reinforced concrete : 2nd ICTRC : International RILEM Conference on Material Science : Aachen Germany, September 6 - 8, 2010. Vol. 1. (RILEM Proceedings PRO ; 75)}, editor = {Brameshuber, Wolfgang}, publisher = {RILEM Publ.}, address = {Bagneux}, organization = {International Conference of Textile Reinforced Concrete <2, 2010, Aachen>}, isbn = {978-2-35158-106-3}, pages = {153 -- 162}, year = {2010}, language = {en} } @article{HarmsReisgenSchleseretal.2010, author = {Harms, Alexander and Reisgen, Uwe and Schleser, Markus and Schiebahn, Alexander and Thiele, Regina}, title = {Herausforderungen an die F{\"u}getechnik: Leichtbau und Kosteneffizienz beim Elektrofahrzeug}, series = {Elektromobilit{\"a}t made in Aachen. (RWTH-Themen : Berichte aus der Rheinisch-Westf{\"a}lischen Technischen Hochschule Aachen ; Ausg. 2010, 2)}, journal = {Elektromobilit{\"a}t made in Aachen. (RWTH-Themen : Berichte aus der Rheinisch-Westf{\"a}lischen Technischen Hochschule Aachen ; Ausg. 2010, 2)}, issn = {0179-079X}, pages = {58 -- 60}, year = {2010}, language = {de} } @inproceedings{ReisgenSchoeneSchleseretal.2010, author = {Reisgen, Uwe and Schoene, Jens and Schleser, Markus and Pak, Daniel}, title = {F{\"u}getechniken f{\"u}r neuartige Bauweisen auf Basis von d{\"u}nnwandigen Strukturelementen aus textilbewehrtem Beton}, series = {30. Assistentenseminar F{\"u}ge- und Schweißtechnik : Vortr{\"a}ge der gleichnamigen Veranstaltung auf der Burg Warberg vom 3. bis 5. September 2009. (DVS-Berichte. 268)}, booktitle = {30. Assistentenseminar F{\"u}ge- und Schweißtechnik : Vortr{\"a}ge der gleichnamigen Veranstaltung auf der Burg Warberg vom 3. bis 5. September 2009. (DVS-Berichte. 268)}, publisher = {DVS-Media}, address = {D{\"u}sseldorf}, organization = {Assistentenseminar F{\"u}ge- und Schweißtechnik <30, 2009, Warberg> ; Institut f{\"u}r Schweiß- und F{\"u}getechnik }, isbn = {978-3-87155-260-1}, pages = {36 -- 43}, year = {2010}, language = {de} } @inproceedings{SchoeneReisgenSchleseretal.2010, author = {Schoene, Jens and Reisgen, Uwe and Schleser, Markus and Jerabek, Jakub and Chudoba, Rostislav}, title = {Theoretical and experimental investigations on textile-reinforced concrete spalling behavior}, series = {8th International PhD Symposium in Civil Engineering : Lyngby, June 20-23, 2010 : proceedings}, booktitle = {8th International PhD Symposium in Civil Engineering : Lyngby, June 20-23, 2010 : proceedings}, editor = {Fisher, Gregor}, publisher = {Technical University of Denmark, Dept. of Civil Engineering}, address = {Lyngby}, organization = {PhD Symposium in Civil Engineering <8, 2010, Lyngby> ; International Federation for Structural Concrete}, isbn = {9788778773012}, pages = {383 -- 388}, year = {2010}, language = {en} } @inproceedings{ReisgenSchleserSchiebahnetal.2010, author = {Reisgen, Uwe and Schleser, Markus and Schiebahn, Alexander and Harms, Alexander}, title = {Einfluss der Maschineneigenschaften beim Widerstandspunktschweißen mit Schweißzangen}, series = {Treffpunkt Widerstandsschweißen : Vortr{\"a}ge der gleichnamigen Sondertagung in Duisburg am 05. und 06. Mai 2010 ; [21. DVS-Sondertagung Widerstandsschweissen 2010 ; Tagungsband]}, booktitle = {Treffpunkt Widerstandsschweißen : Vortr{\"a}ge der gleichnamigen Sondertagung in Duisburg am 05. und 06. Mai 2010 ; [21. DVS-Sondertagung Widerstandsschweissen 2010 ; Tagungsband]}, publisher = {GSI SLV Duisburg}, address = {Duisburg}, organization = {Deutscher Verband f{\"u}r Schweißen und Verwandte Verfahren ; Schweißtechnische Lehr- und Versuchsanstalt ; DVS-Sondertagung Widerstandsschweißen <21, 2010, Duisburg>}, pages = {147 -- 149}, year = {2010}, language = {de} } @inproceedings{ReisgenSchleserHarmsetal.2010, author = {Reisgen, Uwe and Schleser, Markus and Harms, Alexander and Schiebahn, Alexander}, title = {Konduktiv unterst{\"u}tztes R{\"u}hrreibschweißen an Stahl- und Aluminiumwerkstoffen}, series = {DVS congress 2010 : Große Schweißtechnische Tagung ; Studentenkongress ; Statusseminar "Schneidtechnik" ; Abschlusskolloquium zum AiF-Forschungscluster "Integration des R{\"u}hrreibschweißens in Fertigungsprozessketten" ; Vortr{\"a}ge der Veranstaltung in N{\"u}rnberg am 27. und 28. September 2010. (DVS-Berichte ; 267)}, booktitle = {DVS congress 2010 : Große Schweißtechnische Tagung ; Studentenkongress ; Statusseminar "Schneidtechnik" ; Abschlusskolloquium zum AiF-Forschungscluster "Integration des R{\"u}hrreibschweißens in Fertigungsprozessketten" ; Vortr{\"a}ge der Veranstaltung in N{\"u}rnberg am 27. und 28. September 2010. (DVS-Berichte ; 267)}, publisher = {DVS Media}, address = {D{\"u}sseldorf}, organization = {Deutscher Verband f{\"u}r Schweißen und Verwandte Verfahren ; Große Schweißtechnische Tagung <2010, N{\"u}rnberg>}, isbn = {978-3-87155-592-3}, pages = {394 -- 398}, year = {2010}, language = {de} } @incollection{ReisgenSchleserStieglitz2010, author = {Reisgen, Uwe and Schleser, Markus and Stieglitz, Anja}, title = {Kleben in anspruchsvollen Anwendungsbereichen}, series = {Jahrbuch Schweißtechnik 2011}, booktitle = {Jahrbuch Schweißtechnik 2011}, publisher = {DVS}, address = {D{\"u}sseldorf}, isbn = {0935-0292}, pages = {226 -- 235}, year = {2010}, language = {de} } @inproceedings{ReisgenSchleserMokrovetal.2010, author = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Schmidt, A. and Rossiter, E. and Loose, T.}, title = {Durchg{\"a}ngige Schweißsimulation der Eigenspannung und des Gef{\"u}gezustands auf Basis realer Schweißstromquellenparameter}, series = {DVS congress 2010 : Große Schweißtechnische Tagung ; Studentenkongress ; Statusseminar "Schneidtechnik" ; Abschlusskolloquium zum AiF-Forschungscluster "Integration des R{\"u}hrreibschweißens in Fertigungsprozessketten" ; Vortr{\"a}ge der Veranstaltung in N{\"u}rnberg am 27. und 28. September 2010. (DVS-Berichte ; 267)}, booktitle = {DVS congress 2010 : Große Schweißtechnische Tagung ; Studentenkongress ; Statusseminar "Schneidtechnik" ; Abschlusskolloquium zum AiF-Forschungscluster "Integration des R{\"u}hrreibschweißens in Fertigungsprozessketten" ; Vortr{\"a}ge der Veranstaltung in N{\"u}rnberg am 27. und 28. September 2010. (DVS-Berichte ; 267)}, publisher = {DVS Media}, address = {D{\"u}sseldorf}, organization = {Deutscher Verband f{\"u}r Schweißen und Verwandte Verfahren ; Große Schweißtechnische Tagung <2010, N{\"u}rnberg>}, isbn = {978-3-87155-592-3}, pages = {37 -- 42}, year = {2010}, language = {de} } @book{Thomas2010, author = {Thomas, Axel}, title = {Rhetorische Knallfr{\"o}sche : Zitatensammlung f{\"u}r Politik und Wirtschaft}, publisher = {Neck + Heyn}, address = {Aachen}, isbn = {978-3-00-033037-7}, pages = {145 S. : Ill.}, year = {2010}, language = {de} } @inproceedings{PfaffLarkowskiBurnham2010, author = {Pfaff, Raphael and Larkowski, Tomasz and Burnham, Keith J.}, title = {An approach to adaptive control in the behavioural framework}, series = {UKACC International Conference on Control 2010 (CONTROL 2010) : Coventry, United Kingdom, 7 - 10 September 2010 ; Vol. 2. (IET seminar digest ; 2010/004)}, booktitle = {UKACC International Conference on Control 2010 (CONTROL 2010) : Coventry, United Kingdom, 7 - 10 September 2010 ; Vol. 2. (IET seminar digest ; 2010/004)}, publisher = {Curran}, address = {Red Hook, NY}, organization = {United Kingdom Automatic Control Council}, isbn = {978-1-62748-119-9}, pages = {833 -- 838}, year = {2010}, language = {en} } @book{Wollert2010, author = {Wollert, J{\"o}rg}, title = {Wireless Technologies : 12. Kongress, 22. - 23. September 2010, Bochum ; von der Technologie zur Anwendung / J{\"o}rg F. Wollert (Hrsg.) (Fortschritt-Berichte VDI : Reihe 10, Informatik, Kommunikation ; 810)}, publisher = {VDI-Verl.}, address = {D{\"u}sseldorf}, isbn = {978-3-18-381010-9}, pages = {XI, 373 S.}, year = {2010}, language = {de} } @inproceedings{LeidingerSchuermannWollertetal.2010, author = {Leidinger, Rafael and Sch{\"u}rmann, Volker and Wollert, J{\"o}rg and Schneider, Christoph}, title = {Entwicklungsprojekt BASic - Bluetooth Authentication Service}, series = {Wireless Technologies : 12. Kongress, 22. - 23. September 2010, Bochum ; von der Technologie zur Anwendung / J{\"o}rg F. Wollert (Hrsg.) (Fortschritt-Berichte VDI : Reihe 10, Informatik, Kommunikation ; 810)}, booktitle = {Wireless Technologies : 12. Kongress, 22. - 23. September 2010, Bochum ; von der Technologie zur Anwendung / J{\"o}rg F. Wollert (Hrsg.) (Fortschritt-Berichte VDI : Reihe 10, Informatik, Kommunikation ; 810)}, publisher = {VDI-Verl.}, address = {D{\"u}sseldorf}, isbn = {978-3-18-381010-9}, pages = {296 -- 303}, year = {2010}, language = {de} } @inproceedings{Wollert2010, author = {Wollert, J{\"o}rg}, title = {Grundlagen Wireless Technologie}, series = {Wireless Technologies : 12. Kongress, 22. - 23. September 2010, Bochum ; von der Technologie zur Anwendung / J{\"o}rg F. Wollert (Hrsg.) (Fortschritt-Berichte VDI : Reihe 10, Informatik, Kommunikation ; 810)}, booktitle = {Wireless Technologies : 12. Kongress, 22. - 23. September 2010, Bochum ; von der Technologie zur Anwendung / J{\"o}rg F. Wollert (Hrsg.) (Fortschritt-Berichte VDI : Reihe 10, Informatik, Kommunikation ; 810)}, publisher = {VDI-Verl.}, address = {D{\"u}sseldorf}, pages = {322 -- 330}, year = {2010}, language = {de} } @inproceedings{SchuermannLeidingerWollert2010, author = {Sch{\"u}rmann, Volker and Leidinger, R. and Wollert, J{\"o}rg}, title = {Simplified rapid-prototyping with automation technology}, series = {Automobiles and sustainable mobility : FISITA 2010 World Automotive Congress, 30 May - 4 June, Budapest, Hungary ; proceedings}, booktitle = {Automobiles and sustainable mobility : FISITA 2010 World Automotive Congress, 30 May - 4 June, Budapest, Hungary ; proceedings}, organization = {FISITA 2010 World Automotive Congress }, isbn = {978-963-9058-29-3}, pages = {F2010C093}, year = {2010}, language = {en} } @inproceedings{StieglitzWollert2010, author = {Stieglitz, Kristian and Wollert, J{\"o}rg}, title = {Database driven modernization and expansion of storage systems}, series = {Proceedings : the 3rd International Multi-Conference on Engineering and Technological Innovation : June 29th - July 2nd, 2010, Orlando, Florida, USA ; vol. 2}, booktitle = {Proceedings : the 3rd International Multi-Conference on Engineering and Technological Innovation : June 29th - July 2nd, 2010, Orlando, Florida, USA ; vol. 2}, publisher = {IIIS}, address = {Winter Garden, Fla.}, organization = {International Multi-Conference on Engineering and Technological Innovation <3, 2010, Orlando, Fla.>}, isbn = {978-1-936338-03-0}, pages = {180 -- 183}, year = {2010}, language = {de} } @misc{Wollert2010, author = {Wollert, J{\"o}rg}, title = {Neue Wege in der Kommunikation - Wireless Technologie f{\"u}r Automatisierungsl{\"o}sungen}, organization = {Fachforum Automatisierung <2010, Lemgo>}, pages = {1 -- 17}, year = {2010}, language = {de} } @incollection{SchuermannBudaJonkeretal.2010, author = {Sch{\"u}rmann, Volker and Buda, Aurel and Jonker, Stefan and Palmhof, Norman and Wollert, J{\"o}rg}, title = {Wireless in future automotive applications}, series = {Mobile and wireless communications network layer and circuit level design / ed. by Salma Ait Fares ...}, booktitle = {Mobile and wireless communications network layer and circuit level design / ed. by Salma Ait Fares ...}, publisher = {Intech}, address = {London}, isbn = {978-953-307-042-1}, pages = {71 -- 92}, year = {2010}, language = {en} } @incollection{BudaSchuermannWollert2010, author = {Buda, Aurel and Sch{\"u}rmann, Volker and Wollert, J{\"o}rg}, title = {Wireless technologies in factory automation}, series = {Factory automation / ed. by Javier Silvestre-Blanes}, booktitle = {Factory automation / ed. by Javier Silvestre-Blanes}, publisher = {Intech}, address = {London}, isbn = {978-953-7619-42-8}, pages = {29 -- 50}, year = {2010}, language = {en} } @inproceedings{SchuermannKellerWollert2010, author = {Sch{\"u}rmann, Volker and Keller, A. and Wollert, J{\"o}rg}, title = {Geb{\"a}udeautomation mit Webtechnologien : ein Erfahrungsbericht}, series = {Automation 2010 : der 11. Branchentreff der Mess- und Automatisierungstechnik ; Kongress Baden-Baden, 15. und 16. Juni 2010. (VDI-Berichte ; 2092)}, booktitle = {Automation 2010 : der 11. Branchentreff der Mess- und Automatisierungstechnik ; Kongress Baden-Baden, 15. und 16. Juni 2010. (VDI-Berichte ; 2092)}, publisher = {VDI-Verl.}, address = {D{\"u}sseldorf}, organization = {VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik}, isbn = {978-3-18-092092-4}, pages = {321 -- 324}, year = {2010}, language = {de} } @techreport{Wollert2010, author = {Wollert, J{\"o}rg}, title = {MAUS - Mobile Ad-hoc Netzwerke f{\"u}r Userspezifische Systeme : Abschlussbericht (BMBF-Forschungsbericht)}, publisher = {BMBF}, address = {Berlin}, pages = {67 S.}, year = {2010}, language = {de} } @article{WollertLeidinger2010, author = {Wollert, J{\"o}rg and Leidinger, Rafael}, title = {Automation trifft Automotive : SPS in der Fahrzeugtechnik}, series = {Elektronik automotive : Magazin f{\"u}r Entwicklungen in der Kfz-Elektronik und Telematik}, journal = {Elektronik automotive : Magazin f{\"u}r Entwicklungen in der Kfz-Elektronik und Telematik}, number = {4/5}, publisher = {WEKA Fachmedien}, address = {Haar}, issn = {1614-0125}, pages = {44 -- 48}, year = {2010}, abstract = {Eine SPS im Kraftfahrzeug? Das geht ja gar nicht - da gibt es doch all die Hersteller f{\"u}r Kfz-Steuerger{\"a}te, die konfigurierbare Hardware anbieten. Im Prinzip ja, aber leider sind gerade die Sensoren oder Aktoren nicht ansteuerbar, die der Entwickler genau f{\"u}r sein aktuelles Projekt ben{\"o}tigt. Dieser Beitrag gibt einen kleinen Einblick in neue M{\"o}glichkeiten des Rapid Prototyping f{\"u}r mechatronische Systeme auf der Basis von Speicherprogrammierbaren Steuerungen (SPS).}, language = {de} } @article{ReisgenSchleserMokrovetal.2010, author = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Ahmed, Essam}, title = {Uni- and bi-axial deformation behavior of laser welded advanced high strength steel sheets}, series = {Journal of materials processing technology}, volume = {210}, journal = {Journal of materials processing technology}, number = {15}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0924-0136}, doi = {http10.1016/j.jmatprotec.2010.08.003}, pages = {2188 -- 2196}, year = {2010}, abstract = {Bead-on-plate butt joints of 2.5 mm hot rolled DP600/DP600 and 1.2 mm cold rolled TRIP700/TRIP700 steel sheets were performed using 6 kW CO2 laser beam welding. The welding speed ranged from 1.5 to 3.0 and from 2.1 to 3.9 m/min in DP/DP and TRIP/TRIP steel weldments respectively. A top surface helium gas was used as a shielding gas at a flow rate of 20 l/min. Metallographic examinations and transverse tensile testing (DIN EN 895: 1995) were carried out to characterize the weldments. The formability of base metals and weldments were investigated by standard Erichsen test (DIN EN ISO 20482). It was found that the uniaxial plastic behavior of both DP600 and TRIP700 base metals was in agreement with Swift and modified Mecking-Kocks models respectively. In a perpendicular tensile test to the weld line, all specimens were fractured at the base metal however the strengths were somewhat higher than those of base metal. There was a significant reduction in formability caused by welding of both DP/DP and TRIP/TRIP steel weldments and the formability has been improved with the increase of the welding speed.}, language = {en} } @article{ReisgenSchleserJerabeketal.2010, author = {Reisgen, Uwe and Schleser, Markus and Jerabek, Jakub and Chudoba, Rostislav}, title = {Messung der Strahlqualit{\"a}t einer Elektronenstrahlanlage in Umgebungsatmosph{\"a}re}, series = {Materialwissenschaft und Werkstofftechnik}, volume = {41}, journal = {Materialwissenschaft und Werkstofftechnik}, number = {1}, publisher = {Wiley-VCH}, address = {Weinheim}, issn = {1521-4052}, pages = {45 -- 52}, year = {2010}, abstract = {In den letzten Jahrzehnten hat das Elektronenstrahlschweißen, das bereits im gr{\"o}ßeren Maßstab verwendet wird, seine F{\"a}higkeit als qualitatives Werkzeug f{\"u}r die Verbindung verschiedener Materialen nachgewiesen. Das Non Vacuum Electron Beam Welding (NV-EBW) hat zahlreiche Vorteile im Vergleich zum Elektronenstrahlschweißen im Vakuum, da man unter normalem Atmosph{\"a}rendruck arbeiten kann. Im Hinblick auf die reproduzierbare Qualit{\"a}t, insbesondere im Bereich der Massen-Fertigung, ist die Kontrolle der Strahlparameter sowie deren Einfluss auf das Schweißergebnis von großer Bedeutung. Durch eine genaue Kenntnis der Strahlkenngr{\"o}ßen wie des Strahldurchmessers und der Leistungsdichteverteilung kann eine Aussage {\"u}ber die sich ausbildende Schweißnaht sowie die Schweißbaddynamik getroffen werden. Messungen der Strahlkenngr{\"o}ßen im Prozess erlauben insbesondere die Untersuchung von Humping-Effekten. In diesem Beitrag wird der Prozess der Elektronenstrahlvermessung unter atmosph{\"a}rischen Bedingungen beschrieben. Es wird zudem die Abh{\"a}ngigkeit der Elektronenstrahlcharakteristika von den verschiedenen Prozessparametern dargestellt.}, language = {de} } @article{MukherjeePrahlBlecketal.2010, author = {Mukherjee, Krishnendu and Prahl, Ulrich and Bleck, Wolfgang and Reisgen, Uwe and Schleser, Markus and Abdurakhmanov, Aydemir}, title = {Characterization and modelling techniques for gas metal arc welding of DP 600 sheet steels}, series = {Materialwissenschaft und Werkstofftechnik}, volume = {41}, journal = {Materialwissenschaft und Werkstofftechnik}, number = {11}, publisher = {Wiley-VCH}, address = {Weinheim}, issn = {1521-4052}, doi = {10.1002/mawe.201000692}, pages = {972 -- 983}, year = {2010}, abstract = {The objectives of the present work are to characterize the Gas Metal Arc Welding process of DP 600 sheet steel and to summarize the modelling techniques. The time-temperature evolution during the welding cycle was measured experimentally and modelled with the softwaretool SimWeld. To model the phase transformations during the welding cycle dilatometer tests were done to quantify the parameters for phase field modelling by MICRESS®. The important input parameters are interface mobility, nucleation density, etc. A contribution was made to include austenite to bainite transformation in MICRESS®. This is useful to predict the microstructure in the fast cooling segments. The phase transformation model is capable to predict the microstructure along the heating and cooling cycles of welding. Tensile tests have shown the evidence of failure at the heat affected zone, which has the ferrite-tempered martensite microstructure.}, language = {en} } @article{ReisgenSchleserMokrovetal.2010, author = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Ahmed, Essam}, title = {Shielding gas influences on laser weldability of tailored blanks of advanced automotive steels}, series = {Applied surface science}, volume = {257}, journal = {Applied surface science}, number = {5}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0169-4332 (E-Journal); 0169-4332 (Print)}, doi = {10.1016/j.apsusc.2010.08.042}, pages = {1401 -- 1406}, year = {2010}, abstract = {The effects of shielding gas types and flow rates on CO2 laser weldability of DP600/TRIP700 steel sheets were studied in this work. The evaluated shielding gases were helium (He), argon (Ar) and different mixtures of He and Ar. Weld penetration, tensile strength and formability (Erichsen test) of laser welds were found to be strongly dependent upon the shielding gas types. The ability of shielding gas in removing plasma plume and thus increasing weld penetration is believed to be closely related to ionization potential and atomic weight which determine the period of plasma formation and disappearance. It was found that the higher helium shielding gas flow rate, the deeper weld penetration and the lower weld width.}, language = {en} } @article{AhmedReisgenSchleseretal.2010, author = {Ahmed, Essam and Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg}, title = {On formability of tailor laser welded blanks of DP/TRIP steel sheets}, series = {Science and technology of welding and joining}, volume = {15}, journal = {Science and technology of welding and joining}, number = {5}, publisher = {Maney}, address = {Leeds}, issn = {1743-2936}, doi = {10.1179/136217110X12731414739754}, pages = {337 -- 342}, year = {2010}, abstract = {This paper aims to evaluate the formability of tailor welded blanks of dual phase (DP600)/transformation induced plasticity (TRIP700) steel sheets. In this work, bead on plate butt joints of 2·5 mm DP600 and 1·2 mm TRIP700 steel sheets were performed using CO2 laser beam welding. Microhardness measurements and transverse tensile testing were carried out to characterise the welds. The formability of base metals and welds were investigated by standard Erichsen test. In a perpendicular tensile test to the weld line, all specimens were fractured at the TRIP base metal, and the strengths were somewhat higher than those of base metal. There was a significant reduction in formability caused by welding of the DP600/TRIP700 steel sheets, and the formability increased with increasing welding speed.}, language = {en} } @article{HaselgruberMautnerThiele2010, author = {Haselgruber, Nikolaus and Mautner, Karin and Thiele, Jan}, title = {Usage Space Analysis for Reliability Testing}, series = {Quality and Reliability Engineering International}, volume = {26}, journal = {Quality and Reliability Engineering International}, number = {8}, publisher = {Wiley}, address = {New York}, issn = {1099-1638}, doi = {10.1002/qre.1155}, pages = {877 -- 885}, year = {2010}, abstract = {During the development process of a complex technical product, one widely used and important technique is accelerated testing where the applied stress on a component is chosen to exceed the reference stress, i.e. the stress encountered in field operation, in order to reduce the time to failure. For that, the reference stress has to be known. Since a complex technical product may fail regarding numerous failure modes, stress in general is highly dimensional rather than scalar. In addition, customers use their products individually, i.e. field operation should be described by a distribution rather than by one scalar stress value. In this paper, a way to span the customer usage space is shown. It allows the identification of worst case reference stress profiles in significantly reduced dimensions with minimal loss of information. The application example shows that even for a complex product like a combustion engine, stress information can be compressed significantly. With low measurement effort it turned out that only three reference stress cycles were sufficient to cover a broad range of customer stress variety.}, language = {en} } @article{EnningBaier2009, author = {Enning, Manfred and Baier, M.}, title = {Energetic and operational use of FlexCargoRail freight wagons in the single wagon load traffic / Baier, M. ; Enning, M.}, series = {Towards zero emission : EVS 24, the 24th International Battery, Hybrid and Fuel Cell Electric Vehicle Symposium \& Exhibition, Stavanger, Norway, May 13 - 16, 2009 ; symposium proceedings / organised by AVERE ... Robert St{\"u}ssi [Hrsg.]}, journal = {Towards zero emission : EVS 24, the 24th International Battery, Hybrid and Fuel Cell Electric Vehicle Symposium \& Exhibition, Stavanger, Norway, May 13 - 16, 2009 ; symposium proceedings / organised by AVERE ... Robert St{\"u}ssi [Hrsg.]}, address = {Stavanger}, pages = {CD-Rom}, year = {2009}, language = {en} } @article{EnningBaierDaniel2009, author = {Enning, Manfred and Baier, M. and Daniel, A. F.}, title = {Fahrzeugtechnische Machbarkeitsstudie eines selbstangetriebenen G{\"u}terwagens f{\"u}r das System FlexCargoRail / Baier, M. ; Daniel, A. F. ; Enning, M.}, series = {ZEVrail : Glasers Annalen ; Zeitschrift f{\"u}r das gesamte System Bahn. 133 (2009), H. 1-2}, journal = {ZEVrail : Glasers Annalen ; Zeitschrift f{\"u}r das gesamte System Bahn. 133 (2009), H. 1-2}, publisher = {Siemens}, address = {Berlin}, isbn = {1618-8330}, pages = {52 -- 58}, year = {2009}, language = {de} } @article{EnningDollsBrunberg2009, author = {Enning, Manfred and Dolls, S. and Brunberg, A.}, title = {Selbsteinstellverfahren f{\"u}r Temperiervorrichtungen mit Außenverrohrung / Dolls, S. ; Enning, M. ; Brunberg, A. ; Abel, D.}, series = {Automation 2009 : Automatisierungskongress in Deutschland ; Kongress Baden-Baden, 16. und 17. Juni 2009 / VDI-VDE-Gesellschaft Mess- und Automatisierungstechnik}, journal = {Automation 2009 : Automatisierungskongress in Deutschland ; Kongress Baden-Baden, 16. und 17. Juni 2009 / VDI-VDE-Gesellschaft Mess- und Automatisierungstechnik}, publisher = {VDI-Verl.}, address = {D{\"u}sseldorf}, isbn = {978-3-18-092067-2}, pages = {429 -- 432}, year = {2009}, language = {de} } @inproceedings{ChudobaKonradSchleseretal.2009, author = {Chudoba, Rostislav and Konrad, Martin and Schleser, Markus and Meskouris, Konstantin and Reisgen, Uwe}, title = {Parametric study of tensile response of TRC specimens reinforced with epoxy-penetrated multi-filament yarns}, series = {Textilbeton - Theorie und Praxis : Tagungsband zum 4. Kolloquium zu textilbewehrten Tragwerken (CTRS4) und zur 1. Anwendertagung, Dresden, 3.6.2009 - 5.6.2009}, booktitle = {Textilbeton - Theorie und Praxis : Tagungsband zum 4. Kolloquium zu textilbewehrten Tragwerken (CTRS4) und zur 1. Anwendertagung, Dresden, 3.6.2009 - 5.6.2009}, editor = {Curbach, Manfred}, publisher = {Techn. Univ.}, address = {Dresden}, isbn = {978-3-86780-122-5}, pages = {87 -- 98}, year = {2009}, language = {en} } @inproceedings{ReisgenSchleserStieglitz2009, author = {Reisgen, Uwe and Schleser, Markus and Stieglitz, Anja}, title = {Kleben im Schienenfahrzeugbau}, series = {Die Verbindungs-Spezialisten 2009 : Große Schweißtechnische Tagung ; Forschungsforum, Industrieforum, Studentenkongress, Handwerkerforum ; Vortr{\"a}ge der Veranstaltung in Essen vom 14. bis 19. September 2009. DVS-Berichte. 258}, booktitle = {Die Verbindungs-Spezialisten 2009 : Große Schweißtechnische Tagung ; Forschungsforum, Industrieforum, Studentenkongress, Handwerkerforum ; Vortr{\"a}ge der Veranstaltung in Essen vom 14. bis 19. September 2009. DVS-Berichte. 258}, publisher = {DVS-Media}, address = {D{\"u}sseldorf}, organization = {DVS - Deutscher Verband f{\"u}r Schweißen und Verwandte Verfahren e.V. ; Große Schweißtechnische Tagung <2009, Essen>}, isbn = {978-3-87155-584-8}, pages = {182 -- 186}, year = {2009}, language = {de} } @inproceedings{ReisgenSchoeneSchleseretal.2009, author = {Reisgen, Uwe and Schoene, Jens and Schleser, Markus and Pak, Daniel and Feldmann, Markus}, title = {F{\"u}getechniken f{\"u}r neuartige Bauweisen auf Basis von d{\"u}nnwandigen Strukturelementen aus textilbewehrtem Beton}, series = {Die Verbindungs-Spezialisten 2009 : Große Schweißtechnische Tagung ; Forschungsforum, Industrieforum, Studentenkongress, Handwerkerforum ; Vortr{\"a}ge der Veranstaltung in Essen vom 14. bis 19. September 2009. DVS-Berichte. 258}, booktitle = {Die Verbindungs-Spezialisten 2009 : Große Schweißtechnische Tagung ; Forschungsforum, Industrieforum, Studentenkongress, Handwerkerforum ; Vortr{\"a}ge der Veranstaltung in Essen vom 14. bis 19. September 2009. DVS-Berichte. 258}, publisher = {DVS-Media}, address = {D{\"u}sseldorf}, organization = {DVS - Deutscher Verband f{\"u}r Schweißen und Verwandte Verfahren e.V. ; Große Schweißtechnische Tagung <2009, Essen>}, isbn = {978-3-87155-584-8}, pages = {312 -- 318}, year = {2009}, language = {de} } @inproceedings{ReisgenSchleserScheik2009, author = {Reisgen, Uwe and Schleser, Markus and Scheik, Sven}, title = {Fortschritte beim linienf{\"o}rmigen Mikrodispensen ungef{\"u}llter Klebstoffe}, series = {4. Kolloquium Mikroproduktion : Fachbeitr{\"a}ge der vier SFB der Mikrotechnik ; Bremen, 28.-29. Oktober 2009}, booktitle = {4. Kolloquium Mikroproduktion : Fachbeitr{\"a}ge der vier SFB der Mikrotechnik ; Bremen, 28.-29. Oktober 2009}, editor = {Vollertsen, Frank and B{\"u}ttgenbach, Stephanus}, publisher = {BIAS Verl.}, address = {Bremen}, organization = {Kolloquium Mikroproduktion <4, 2009, Bremen>}, isbn = {978-3-933762-32-0}, pages = {43 -- 51}, year = {2009}, language = {de} } @inproceedings{ReisgenSchleserMokrovetal.2009, author = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Ahmed, Essam and Schmidt, Andre and Rossiter, Eduardo}, title = {Integrative Berechnung von Verzug und Eigenspannungen auf Basis realer Schweißparameter}, series = {Tagungsband / SYSWELD-Forum 2009 : 22. - 23. Oktober 2009, Weimar}, booktitle = {Tagungsband / SYSWELD-Forum 2009 : 22. - 23. Oktober 2009, Weimar}, editor = {Hildebrand, J{\"o}rg}, publisher = {Univ.-Verl.}, address = {Weimar}, isbn = {978-3-86068-401-6}, pages = {32 -- 41}, year = {2009}, language = {de} } @inproceedings{ReisgenSchleserAbdurakhmanovetal.2009, author = {Reisgen, Uwe and Schleser, Markus and Abdurakhmanov, Aydemir and Gumenyuk, Amdrej V.}, title = {Measurement method of electron beam plasma parameters by non-vacuum electron beam welding}, series = {Beam technologies \& laser application : proceedings of the VI international conference, Saint Petersburg, Sept. 23-25, 2009}, booktitle = {Beam technologies \& laser application : proceedings of the VI international conference, Saint Petersburg, Sept. 23-25, 2009}, editor = {Turichin, G.}, publisher = {Politechnical Univ.}, address = {Saint Petersburg}, organization = {Russian Academy of Science}, pages = {259 -- 267}, year = {2009}, language = {en} }