@inproceedings{KesslerBalcGebhardtetal.2017,
  author    = {Kessler, Julia and Balc, Nicolae and Gebhardt, Andreas and Abbas, Karim},
  title     = {Basic research on lattice structures focused on the reliance of the cross sectional area and additional coatings},
  series = {The 4th International Conference on Computing and Solutions in Manufacturing Engineering 2016 - CoSME'16},
  booktitle = {The 4th International Conference on Computing and Solutions in Manufacturing Engineering 2016 - CoSME'16},
  edition   = {Vol. 94},
  doi       = {10.1051/matecconf/20179403008},
  pages     = {7 S.},
  year      = {2017},
  language  = {en}
}
@inproceedings{KesslerBalcGebhardt2016,
  author    = {Kessler, Julia and Balc, Nicolae and Gebhardt, Andreas},
  title     = {Basic research on lattice structures focused on the strut shape and welding beads},
  series = {Physics Procedia},
  volume    = {Vol. 83},
  booktitle = {Physics Procedia},
  issn      = {1875-3884},
  doi       = {10.1016/j.phpro.2016.08.086},
  pages     = {833 -- 838},
  year      = {2016},
  language  = {en}
}
@article{KesslerBalcGebhardtetal.2015,
  author    = {Kessler, Julia and Balc, Nicolae and Gebhardt, Andreas and Abbas, Karim},
  title     = {Basic Research on Lattice Structures Focused on the Tensile Strength},
  series = {Applied Mechanics and Materials},
  volume    = {Vol. 808},
  journal   = {Applied Mechanics and Materials},
  publisher = {Trans Tech Publications},
  address   = {B{\"a}ch},
  issn      = {1662-7482},
  doi       = {10.4028/www.scientific.net/AMM.808.193},
  pages     = {193 -- 198},
  year      = {2015},
  language  = {en}
}
@article{KampkerSchleserTriebsetal.2018,
  author    = {Kampker, Achim and Schleser, Markus and Triebs, Johannes and Berg, Alexander-Karl and Hansen, Jan Ole and Fiedler, Falko},
  title     = {Bauteilintegrierte Vorrichtungsfunktionen im Karosseriebau : Aktuelle Ergebnisse im Forschungsprojekt ProeK},
  series = {ZWF Zeitschrift f{\"u}r wirtschaftlichen Fabrikbetrieb},
  volume    = {113},
  journal   = {ZWF Zeitschrift f{\"u}r wirtschaftlichen Fabrikbetrieb},
  number    = {11},
  publisher = {De Gruyter},
  address   = {Berlin},
  issn      = {0947-0085},
  doi       = {10.3139/104.112012},
  pages     = {767 -- 770},
  year      = {2018},
  abstract  = {Das Forschungsprojekt Produktionseffizienz in der Kleinserie (ProeK) erarbeitet kosteng{\"u}nstige und effiziente L{\"o}sungsans{\"a}tze f{\"u}r Prozessketten im Zukunftsfeld der Elektromobilit{\"a}t. Das Teilprojekt Karosserie setzt diese Zielsetzung durch innovative und praxisorientierte Produkt- und Prozesskonzepte mit neuartigen bauteilintegrierten Vorrichtungsfunktionen (BiV) um. Im Teilprojekt Außenhaut sollen Toleranzen adaptiv durch Anpassungen der Prozessparameter sowie Bauteilmanipulation kompensiert werden.},
  language  = {de}
}
@inproceedings{PeekenBenner1985,
  author    = {Peeken, Heinz and Benner, Joachim},
  title     = {Beeintr{\"a}chtigung des Druckaufbaus in Gleitlagern durch Schmierstoffversch{\"a}umung},
  series = {Gleit- und W{\"a}lzlagerungen : Gestaltung, Berechnung, Einsatz; Tagung Neu-Ulm, 14. und 15. M{\"a}rz 1985 / VDI-Ges. Entwicklung, Konstruktion, Vertrieb. - (VDI-Berichte ; 549)},
  booktitle = {Gleit- und W{\"a}lzlagerungen : Gestaltung, Berechnung, Einsatz; Tagung Neu-Ulm, 14. und 15. M{\"a}rz 1985 / VDI-Ges. Entwicklung, Konstruktion, Vertrieb. - (VDI-Berichte ; 549)},
  isbn      = {3-18-090549-2},
  issn      = {0083-5560},
  pages     = {373 -- 397},
  year      = {1985},
  language  = {de}
}
@article{KaemperHagemannEhrfeldetal.1996,
  author    = {K{\"a}mper, Klaus-Peter and Hagemann, B. and Ehrfeld, W. and Lehr, H.},
  title     = {Berechnung und Optimierung von Permanentmagnet-Mikromotoren mit Hilfe der Finite-Elemente-Methode. Hagemann, B.; Ehrfeld, W.; K{\"a}mper, K.-P.; Lehr, H.; Michel, F.; Th{\"u}rigen, C.},
  series = {Simulation mit der Finite-Elemente-Methode in Feinwerk- und Mikrotechnik, M{\"u}nchen, 12. M{\"a}rz. 1996},
  journal   = {Simulation mit der Finite-Elemente-Methode in Feinwerk- und Mikrotechnik, M{\"u}nchen, 12. M{\"a}rz. 1996},
  pages     = {1 -- 13},
  year      = {1996},
  language  = {de}
}
@article{PeekenBenner1984,
  author    = {Peeken, Heinz and Benner, Joachim},
  title     = {Berechnung von hydrodynamischen Radial- und Axiallagern},
  series = {Goldschmidt informiert : aus der Arbeit der Th. Goldschmidt AG, Chemische Fabriken},
  volume    = {61},
  journal   = {Goldschmidt informiert : aus der Arbeit der Th. Goldschmidt AG, Chemische Fabriken},
  number    = {2},
  publisher = {Goldschmidt},
  address   = {Essen},
  issn      = {0340-8507},
  pages     = {42 -- 48},
  year      = {1984},
  language  = {de}
}
@article{Gauchel2008,
  author    = {Gauchel, Joachim},
  title     = {Berechnung von Kurvengetrieben mit Gleitbewegung im Kurvengelenk},
  series = {Bewegungstechnik 2008 : Koppelgetriebe, Kurvengetriebe und geregelte Antriebe im Maschinen-, Fahrzeug- und Ger{\"a}tebau ; Tagung Fulda, 23. und 24. September 2008 / VDI, Entwicklung, Konstruktion, Vertrieb},
  journal   = {Bewegungstechnik 2008 : Koppelgetriebe, Kurvengetriebe und geregelte Antriebe im Maschinen-, Fahrzeug- und Ger{\"a}tebau ; Tagung Fulda, 23. und 24. September 2008 / VDI, Entwicklung, Konstruktion, Vertrieb},
  publisher = {VDI-Verl.},
  address   = {D{\"u}sseldorf},
  isbn      = {978-3-18-092050-4},
  pages     = {211 -- 226},
  year      = {2008},
  language  = {de}
}
@book{GauchelDittrichBraune1979,
  author    = {Gauchel, Joachim and Dittrich, G{\"u}nter and Braune, Reinhard},
  title     = {Berechnung von Maschinenschwingungen mit einem programmierbaren Tischrechner},
  publisher = {Westdt. Verl.},
  address   = {Opladen},
  isbn      = {3-531-02822-7},
  pages     = {126 S. : Ill., graph. Darst.},
  year      = {1979},
  language  = {de}
}
@incollection{Benner2014,
  author    = {Benner, Joachim},
  title     = {Berechnungsmethoden der W{\"a}lzlagerreibung und Einflussgr{\"o}ßen},
  series = {SMK 2014 : Schweizer Maschinenelemente Kolloquim 25. und 26. November 2014},
  booktitle = {SMK 2014 : Schweizer Maschinenelemente Kolloquim 25. und 26. November 2014},
  publisher = {TUDpress Verl. der Wissenschaften},
  address   = {Dresden},
  isbn      = {978-3-944331-81-2},
  pages     = {151 -- 170},
  year      = {2014},
  language  = {de}
}
@article{Reichert2017,
  author    = {Reichert, Walter},
  title     = {Berufseinstieg f{\"u}r Wirtschaftsingenieure - Bachelor oder Master?},
  series = {Berufsstart},
  journal   = {Berufsstart},
  year      = {2017},
  language  = {de}
}
@article{PfaffGidaszewskiSchmidt2020,
  author    = {Pfaff, Raphael and Gidaszewski, Lars and Schmidt, Bernd},
  title     = {Ber{\"u}cksichtigung von No Fault Found im Diagnose- und Instandhaltungssystem von Schienenfahrzeugen},
  series = {ETR - Eisenbahntechnische Rundschau},
  journal   = {ETR - Eisenbahntechnische Rundschau},
  number    = {5},
  publisher = {DVV Media Group},
  address   = {Hamburg},
  issn      = {0013-2845},
  pages     = {56 -- 59},
  year      = {2020},
  abstract  = {Intermittierende und nicht reproduzierbare Fehler, auch als No Fault Found bezeichnet, treten in praktisch allen Bereichen auf und sorgen f{\"u}r hohe Kosten. Diese sind h{\"a}ufig auf unpr{\"a}zise Fehlerbeschreibungen zur{\"u}ckzuf{\"u}hren. Im vorliegenden Beitrag werden Anpassungen der Vorgehensweise bei der Entwicklung und Anpassungen des Diagnosesystems vorgeschlagen.},
  language  = {de}
}
@article{GebhardtBackeskrameretal.1995,
  author    = {Gebhardt, Andreas and Backes, G. and kramer, T. and Kreutz, E.-W. (u.a.)},
  title     = {Beschichten von Kurbelzapfen mit CO2-Laserstrahlung. Energietechnik},
  series = {Maschinenmarkt. 101 (1995), H. 12},
  journal   = {Maschinenmarkt. 101 (1995), H. 12},
  isbn      = {0341-5775},
  pages     = {42 -- 45},
  year      = {1995},
  language  = {de}
}
@misc{SchoeneGlowaniaSchleseretal.2011,
  author    = {Schoene, Jens and Glowania, Michael and Schleser, Markus and Gries, Thomas and Reisgen, Uwe},
  title     = {Betonteil und Verfahren zum Bewehren von Teilen aus Beton / Offenlegungsschrift},
  publisher = {Dt. Patent- und Markenamt},
  address   = {M{\"u}nchen},
  pages     = {6 S. : graph. Darst.},
  year      = {2011},
  language  = {de}
}
@article{WingensMayPfaff2019,
  author    = {Wingens, Niklas and May, J{\"o}rg and Pfaff, Raphael},
  title     = {Betrieblich-technische Innovationsans{\"a}tze zur Bremsprobe nach einer Prozess{\"a}nderung},
  series = {Eisenbahntechnische Rundschau : ETR ; Zeitschrift f{\"u}r die gesamte Eisenbahntechnik},
  journal   = {Eisenbahntechnische Rundschau : ETR ; Zeitschrift f{\"u}r die gesamte Eisenbahntechnik},
  number    = {5},
  publisher = {DVV Media Group},
  address   = {Hamburg},
  issn      = {0013-2845},
  pages     = {5},
  year      = {2019},
  language  = {de}
}
@article{Wollert1999,
  author    = {Wollert, J{\"o}rg},
  title     = {Betriebssysteme im Wettlauf : Elan-Entwicklungsboard mit Win CE und QNX},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  volume    = {Bd. 48},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {H. 11},
  issn      = {0013-5658},
  pages     = {86 -- 91},
  year      = {1999},
  language  = {de}
}
@book{Baatz1973,
  author    = {Baatz, Udo},
  title     = {Bildschirmunterst{\"u}tztes Konstruieren},
  publisher = {VDI-Verl.},
  address   = {Duesseldorf},
  isbn      = {3-18-403039-3},
  pages     = {XI, 137 S. : Ill, graph. Darst.},
  year      = {1973},
  language  = {de}
}
@article{BaatzOpitzWiendahl1970,
  author    = {Baatz, Udo and Opitz, Herwart and Wiendahl, Hans Peter},
  title     = {Bildschirmunterst{\"u}tztes Konstruieren - Prinziperarbeitung, Gestaltung und Detaillierung mit Hilfe der Men{\"u}technik},
  series = {Industrieanzeiger},
  volume    = {92},
  journal   = {Industrieanzeiger},
  number    = {98},
  publisher = {Konradin},
  address   = {Leinfelden-Echterdingen},
  isbn      = {0019-9036},
  pages     = {2371 -- 2374},
  year      = {1970},
  language  = {de}
}
@book{Baatz1971,
  author    = {Baatz, Udo},
  title     = {Bildschirmunterst{\"u}tztes Konstruieren : Funktionsfindung, Prinziperarbeitung, Gestaltung und Detaillierung mit Hilfe graphischer Datenverarbeitungsanlagen},
  address   = {Aachen},
  year      = {1971},
  language  = {de}
}
@article{Wollert2002,
  author    = {Wollert, J{\"o}rg},
  title     = {Bluetooth aktuell - Technik und Anwendungen ; 10: Alternative Technologien},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  volume    = {Bd. 51},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {H. 2},
  issn      = {0013-5658},
  pages     = {50 -- 56},
  year      = {2002},
  language  = {de}
}
@article{Wollert2001,
  author    = {Wollert, J{\"o}rg},
  title     = {Bluetooth aktuell - Technik und Anwendungen ; 1: Die Technik auf einen Blick},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  volume    = {Bd. 50},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {H. 17},
  issn      = {0013-5658},
  pages     = {80 -- 84},
  year      = {2001},
  language  = {de}
}
@article{Wollert2001,
  author    = {Wollert, J{\"o}rg},
  title     = {Bluetooth aktuell - Technik und Anwendungen ; 2: Die M{\"o}glichkeiten der Bluetooth-Technik},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  volume    = {Bd. 50},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {H. 18},
  issn      = {0013-5658},
  pages     = {68 -- 74},
  year      = {2001},
  language  = {de}
}
@article{Wollert2001,
  author    = {Wollert, J{\"o}rg},
  title     = {Bluetooth aktuell - Technik und Anwendungen ; 3: Rund um den Bluetooth-Protokollstack},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  volume    = {Bd. 50},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {H. 19},
  issn      = {0013-5658},
  pages     = {96 -- 103},
  year      = {2001},
  language  = {de}
}
@article{Wollert2001,
  author    = {Wollert, J{\"o}rg},
  title     = {Bluetooth aktuell - Technik und Anwendungen ; 4: Der Bluetooth Protokoll-Stack},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  volume    = {Jg. 50},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {Nr. 20},
  issn      = {0013-5658},
  pages     = {76 -- 81},
  year      = {2001},
  language  = {de}
}
@article{Wollert2001,
  author    = {Wollert, J{\"o}rg},
  title     = {Bluetooth aktuell - Technik und Anwendungen ; 5: Die Bluetooth-Host-Schnittstelle},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  volume    = {Bd. 50},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {H. 22},
  issn      = {0013-5658},
  pages     = {60 -- 65},
  year      = {2001},
  language  = {de}
}
@article{Wollert2001,
  author    = {Wollert, J{\"o}rg},
  title     = {Bluetooth aktuell - Technik und Anwendungen ; 6: Die Bluetooth-Host-Software},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  volume    = {Bd. 50},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {H. 23},
  issn      = {0013-5658},
  pages     = {50 -- 57},
  year      = {2001},
  language  = {de}
}
@article{Wollert2001,
  author    = {Wollert, J{\"o}rg},
  title     = {Bluetooth aktuell - Technik und Anwendungen ; 7: Angepasste Protokolle},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  volume    = {Bd. 50},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {H. 24},
  issn      = {0013-5658},
  pages     = {66 -- 72},
  year      = {2001},
  language  = {de}
}
@article{Wollert2001,
  author    = {Wollert, J{\"o}rg},
  title     = {Bluetooth aktuell - Technik und Anwendungen ; 8: Anwendungs-Profile},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  volume    = {Bd. 50},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {H. 25},
  issn      = {0013-5658},
  pages     = {66 -- 73},
  year      = {2001},
  language  = {de}
}
@article{Wollert2002,
  author    = {Wollert, J{\"o}rg},
  title     = {Bluetooth aktuell - Technik und Anwendungen ; 9: Bluetooth-Systementwicklung},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  volume    = {Bd. 51},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {H. 1},
  issn      = {0013-5658},
  pages     = {58 -- 63},
  year      = {2002},
  language  = {de}
}
@article{Wollert2002,
  author    = {Wollert, J{\"o}rg},
  title     = {Bluetooth im Automobil : derzeitiger Stand der Technik - und was danach kommt},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler ; Sonderh. Elektronik automotive : Magazin f{\"u}r Entwicklungen in der Kfz-Elektronik und Telematik},
  volume    = {Bd. 51},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler ; Sonderh. Elektronik automotive : Magazin f{\"u}r Entwicklungen in der Kfz-Elektronik und Telematik},
  number    = {Sonderh. Sept.},
  issn      = {0013-5658},
  pages     = {60 -- 63},
  year      = {2002},
  language  = {de}
}
@article{Wollert2004,
  author    = {Wollert, J{\"o}rg},
  title     = {Bluetooth in der Automatisierung : kabelfrei in eine bessere Zukunft},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  volume    = {Bd. 53},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {H. 14},
  issn      = {0013-5658},
  pages     = {42 -- 46},
  year      = {2004},
  language  = {de}
}
@article{Wollert2008,
  author    = {Wollert, J{\"o}rg},
  title     = {Bluetooth in der Klemme},
  series = {Computer \& Automation : Fachmedium der Automatisierungstechnik},
  journal   = {Computer \& Automation : Fachmedium der Automatisierungstechnik},
  number    = {H. 10},
  issn      = {1615-8512},
  pages     = {62 -- 67},
  year      = {2008},
  language  = {de}
}
@inproceedings{Wollert2002,
  author    = {Wollert, J{\"o}rg},
  title     = {Bluetooth in Embedded-Anwendungen in der Automatisierungstechnik},
  series = {Tagungsband / SPS IPC Drives 2002 : 13. Fachmesse und Kongress, 26. - 28. November 2002 N{\"u}rnberg; elektrische Automatisierung - Systeme und Komponenten. (Praxiswissen IEE - Automatisierung)},
  booktitle = {Tagungsband / SPS IPC Drives 2002 : 13. Fachmesse und Kongress, 26. - 28. November 2002 N{\"u}rnberg; elektrische Automatisierung - Systeme und Komponenten. (Praxiswissen IEE - Automatisierung)},
  publisher = {H{\"u}thig},
  address   = {Heidelberg},
  isbn      = {3-7785-2863-7},
  pages     = {28 -- 37},
  year      = {2002},
  language  = {de}
}
@article{Wollert2004,
  author    = {Wollert, J{\"o}rg},
  title     = {Bluetooth, WLAN and ZigBee f{\"u}r die Automatisierungstechnik},
  series = {Etz : Elektrotechnik \& Automation},
  volume    = {Bd. 125},
  journal   = {Etz : Elektrotechnik \& Automation},
  number    = {H. 6},
  issn      = {0948-7387},
  pages     = {10 -- 18},
  year      = {2004},
  language  = {de}
}
@incollection{Wollert2005,
  author    = {Wollert, J{\"o}rg},
  title     = {Bluetooth, WLAN und ZigBee f{\"u}r die Automatisierungstechnik},
  series = {Jahrbuch Elektrotechnik 2006},
  booktitle = {Jahrbuch Elektrotechnik 2006},
  publisher = {VDE Verl.},
  address   = {Berlin [u.a.]},
  isbn      = {978-3-8007-2895-4},
  pages     = {27 -- 41},
  year      = {2005},
  language  = {de}
}
@article{WollertVedralGrimmetal.2004,
  author    = {Wollert, J{\"o}rg and Vedral, Andreas and Grimm, A. and Holtmann, M.},
  title     = {Bluetooth-Sicherheit : wie viel Pers{\"o}nlichkeit gebe ich preis?},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler ; Sonderh. Wireless : Fachmedium f{\"u}r Entwicklungen funkbasierter Systeme},
  volume    = {Bd. 53},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler ; Sonderh. Wireless : Fachmedium f{\"u}r Entwicklungen funkbasierter Systeme},
  number    = {Sonderh. M{\"a}rz},
  issn      = {0013-5658},
  pages     = {30 -- 35},
  year      = {2004},
  language  = {de}
}
@article{Wollert2008,
  author    = {Wollert, J{\"o}rg},
  title     = {Bluetooth: Funk f{\"u}r alle(s)? : 10 Jahre Bluetooth: ein Technologie-{\"U}ber- und -Ausblick},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler ; Sonderh. Wireless : Fachmedium f{\"u}r Entwicklungen funkbasierter Systeme},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler ; Sonderh. Wireless : Fachmedium f{\"u}r Entwicklungen funkbasierter Systeme},
  number    = {Okt.},
  pages     = {36 -- 43},
  year      = {2008},
  language  = {de}
}
@article{FeldmannPakGessleretal.2006,
  author    = {Feldmann, Markus and Pak, Daniel and Geßler, Achim and Dilthey, Ulrich and Schleser, Markus},
  title     = {Bonded connections for textile reinforced concrete structures},
  series = {Cailiao-gongcheng = Journal of materials engineering},
  journal   = {Cailiao-gongcheng = Journal of materials engineering},
  number    = {Special iss.},
  issn      = {1001-4381},
  pages     = {123 -- 127},
  year      = {2006},
  language  = {en}
}
@article{Pfaff2023,
  author    = {Pfaff, Raphael},
  title     = {Braking distance prediction for vehicle consist in low-speed on-sight operation: a Monte Carlo approach},
  series = {Railway Engineering Science},
  volume    = {31},
  journal   = {Railway Engineering Science},
  number    = {2},
  publisher = {SpringerOpen},
  issn      = {2662-4753 (eISSN)},
  doi       = {10.1007/s40534-023-00303-7},
  pages     = {135 -- 144},
  year      = {2023},
  abstract  = {The first and last mile of a railway journey, in both freight and transit applications, constitutes a high effort and is either non-productive (e.g. in the case of depot operations) or highly inefficient (e.g. in industrial railways). These parts are typically managed on-sight, i.e. with no signalling and train protection systems ensuring the freedom of movement. This is possible due to the rather short braking distances of individual vehicles and shunting consists. The present article analyses the braking behaviour of such shunting units. For this purpose, a dedicated model is developed. It is calibrated on published results of brake tests and validated against a high-definition model for low-speed applications. Based on this model, multiple simulations are executed to obtain a Monte Carlo simulation of the resulting braking distances. Based on the distribution properties and established safety levels, the risk of exceeding certain braking distances is evaluated and maximum braking distances are derived. Together with certain parameters of the system, these can serve in the design and safety assessment of driver assistance systems and automation of these processes.},
  language  = {en}
}
@incollection{Wollert2006,
  author    = {Wollert, J{\"o}rg},
  title     = {Bussysteme},
  series = {Handbuch der Mess- und Automatisierungstechnik in der Produktion / Hans-J{\"u}rgen Gevatter ... (Hrsg.). - 2. Aufl.},
  booktitle = {Handbuch der Mess- und Automatisierungstechnik in der Produktion / Hans-J{\"u}rgen Gevatter ... (Hrsg.). - 2. Aufl.},
  publisher = {Springer},
  address   = {Berlin [u.a.]},
  isbn      = {3-540-21207-8 ; 978-3-540-21207-2},
  pages     = {475 -- 653},
  year      = {2006},
  language  = {de}
}
@book{FiedlerWollert1993,
  author    = {Fiedler, J{\"o}rg and Wollert, J{\"o}rg},
  title     = {C f{\"u}r die Automatisierungspraxis : Grundlagen, Algorithmen, Beispiele},
  publisher = {D{\"u}sseldorf},
  address   = {VDI-Verl.},
  isbn      = {3-18-401320-0},
  pages     = {VIII, 278 S.},
  year      = {1993},
  language  = {de}
}
@book{HeinrichsWeckVonderhagen1981,
  author    = {Heinrichs, Horst and Weck, M. and Vonderhagen, H.},
  title     = {CAD-Programmbibliothek f{\"u}r Großrechneranlagen},
  address   = {Aachen},
  year      = {1981},
  language  = {de}
}
@book{Baatz1993,
  author    = {Baatz, Udo},
  title     = {CAD/CAM - Compass Maschinenbau. Ein Leitfaden f{\"u}r die optimale Systemauswahl CAD/CNC/CAM/CAE/PPS},
  publisher = {CADIB},
  address   = {Aachen},
  pages     = {[getr. Z{\"a}hlung]},
  year      = {1993},
  language  = {de}
}
@book{Baatz1985,
  author    = {Baatz, Udo},
  title     = {CAD/CAM im Maschinenbau - wohin geht der Weg?},
  address   = {M{\"u}lheim a.d. Ruhr},
  year      = {1985},
  language  = {de}
}
@article{HaagZontarSchleupenetal.2014,
  author    = {Haag, S. and Zontar, D. and Schleupen, Josef and M{\"u}ller, T. and Brecher, C.},
  title     = {Chain of refined perception in self-optimizing assembly of micro-optical systems},
  series = {Journal of sensors and sensor systems},
  volume    = {3},
  journal   = {Journal of sensors and sensor systems},
  number    = {1},
  publisher = {Copernicus Publ.},
  address   = {G{\"o}ttingen},
  issn      = {2194-878X},
  doi       = {10.5194/jsss-3-87-2014},
  pages     = {87 -- 95},
  year      = {2014},
  abstract  = {Today, the assembly of laser systems requires a large share of manual operations due to its complexity regarding the optimal alignment of optics. Although the feasibility of automated alignment of laser optics has been shown in research labs, the development effort for the automation of assembly does not meet economic requirements - especially for low-volume laser production. This paper presents a model-based and sensor-integrated assembly execution approach for flexible assembly cells consisting of a macro-positioner covering a large workspace and a compact micromanipulator with camera attached to the positioner. In order to make full use of available models from computer-aided design (CAD) and optical simulation, sensor systems at different levels of accuracy are used for matching perceived information with model data. This approach is named "chain of refined perception", and it allows for automated planning of complex assembly tasks along all major phases of assembly such as collision-free path planning, part feeding, and active and passive alignment. The focus of the paper is put on the in-process image-based metrology and information extraction used for identifying and calibrating local coordinate systems as well as the exploitation of that information for a part feeding process for micro-optics. Results will be presented regarding the processes of automated calibration of the robot camera as well as the local coordinate systems of part feeding area and robot base.},
  language  = {en}
}
@inproceedings{LuftGebhardtBalc2019,
  author    = {Luft, Angela and Gebhardt, Andreas and Balc, Nicolae},
  title     = {Challenges of additive manufacturing in production systems},
  series = {Modern technologies in manufacturing (MTeM 2019)},
  volume    = {299},
  booktitle = {Modern technologies in manufacturing (MTeM 2019)},
  number    = {Article 01003},
  doi       = {10.1051/matecconf/201929901003},
  pages     = {6 Seiten},
  year      = {2019},
  language  = {en}
}
@article{Pfeiffer2002,
  author    = {Pfeiffer, Johann},
  title     = {Chancen im Maschinenbau},
  series = {Fachblatt : Journal der Fachhochschule Aachen . 2002 (2002), H. 1},
  journal   = {Fachblatt : Journal der Fachhochschule Aachen . 2002 (2002), H. 1},
  publisher = {-},
  pages     = {2},
  year      = {2002},
  language  = {de}
}
@article{Hanrath1989,
  author    = {Hanrath, Wilhelm},
  title     = {Character tables of some factor groups of space groups},
  series = {Perfect groups / Derek F. Holt and W. Plesken},
  journal   = {Perfect groups / Derek F. Holt and W. Plesken},
  publisher = {Clarendon Press},
  address   = {Oxford},
  isbn      = {0-19-853559-7},
  pages     = {357 -- 359},
  year      = {1989},
  language  = {en}
}
@article{MukherjeePrahlBlecketal.2010,
  author    = {Mukherjee, Krishnendu and Prahl, Ulrich and Bleck, Wolfgang and Reisgen, Uwe and Schleser, Markus and Abdurakhmanov, Aydemir},
  title     = {Characterization and modelling techniques for gas metal arc welding of DP 600 sheet steels},
  series = {Materialwissenschaft und Werkstofftechnik},
  volume    = {41},
  journal   = {Materialwissenschaft und Werkstofftechnik},
  number    = {11},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1521-4052},
  doi       = {10.1002/mawe.201000692},
  pages     = {972 -- 983},
  year      = {2010},
  abstract  = {The objectives of the present work are to characterize the Gas Metal Arc Welding process of DP 600 sheet steel and to summarize the modelling techniques. The time-temperature evolution during the welding cycle was measured experimentally and modelled with the softwaretool SimWeld. To model the phase transformations during the welding cycle dilatometer tests were done to quantify the parameters for phase field modelling by MICRESS®. The important input parameters are interface mobility, nucleation density, etc. A contribution was made to include austenite to bainite transformation in MICRESS®. This is useful to predict the microstructure in the fast cooling segments. The phase transformation model is capable to predict the microstructure along the heating and cooling cycles of welding. Tensile tests have shown the evidence of failure at the heat affected zone, which has the ferrite-tempered martensite microstructure.},
  language  = {en}
}
@article{MukherjeeRamazaniYangetal.2011,
  author    = {Mukherjee, Krishnendu and Ramazani, Ali and Yang, Li and Prahl, Ulrich and Bleck, Wolfgang and Reisgen, Uwe and Schleser, Markus and Abdurakhmanov, Aydemir},
  title     = {Characterization of gas metal arc welded hot rolled DP600 steel},
  series = {Steel research international},
  volume    = {Vol. 82},
  journal   = {Steel research international},
  number    = {Iss. 12},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1869-344X (E-Book); 1611-3683 (Print)},
  pages     = {1408 -- 1416},
  year      = {2011},
  language  = {en}
}
@book{Klocke1992,
  author    = {Klocke, Martina},
  title     = {CIM, Bedeutung f{\"u}r die Weiterbildung in Klein- und Mittelbetrieben : [Bericht {\"u}ber den EUROTECNET-Workshop "CIM - Bedeutung f{\"u}r die Weiterbildung in Klein- und Mittelbetrieben" vom 16. bis 17. Oktober 1991 in Elmshorn (BR Deutschland)] / [Bericht erstattet von Martina Klocke]},
  publisher = {EUROTECNET},
  address   = {Br{\"u}ssel},
  pages     = {64 S.: Ill.},
  year      = {1992},
  language  = {de}
}
@article{WollbrinkMasloZimmeretal.2020,
  author    = {Wollbrink, Moritz and Maslo, Semir and Zimmer, Daniel and Abbas, Karim and Arntz, Kristian and Bergs, Thomas},
  title     = {Clamping and substrate plate system for continuous additive build-up and post-processing of metal parts},
  series = {Procedia CIRP},
  volume    = {93},
  journal   = {Procedia CIRP},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {2212-8271},
  doi       = {10.1016/j.procir.2020.04.015},
  pages     = {108 -- 113},
  year      = {2020},
  abstract  = {The manufacturing share of laser powder bed fusion (L-PBF) increases in industrial application, but still many process steps are manually operated. Additionally, it is not possible to achieve tight dimensional tolerances or low surfaces roughness. Hence, a process chain has to be set up to combine additive manufacturing (AM) with further machining technologies. To achieve a continuous workpiece flow as basis for further industrialization of L-PBF, the paper presents a novel substrate system and its application on L-PBF machines and post-processing. The substrate system consists of a zero-point clamping system and a matrix-like interface of contact pins to be substantially connected to the workpiece within the L-PBF process.},
  language  = {en}
}
@article{Klocke1981,
  author    = {Klocke, Martina},
  title     = {CNC-Technik holt auf bei der Feinbearbeitung / Voelmy, M.},
  series = {VDI-Nachrichten (1981)},
  journal   = {VDI-Nachrichten (1981)},
  year      = {1981},
  language  = {de}
}
@article{StarkeKuhneFrassek1984,
  author    = {Starke, G{\"u}nther and Kuhne, A.H. and Frassek, B.},
  title     = {Components for the automated GMAW process. Bestandteile des automatischen Metall-Schutzgas-Schweissverfahrens},
  series = {Welding Journal. 63 (1984), H. 1},
  journal   = {Welding Journal. 63 (1984), H. 1},
  isbn      = {0043-2296},
  pages     = {31 -- 34},
  year      = {1984},
  language  = {en}
}
@inproceedings{DiltheySchleser2006,
  author    = {Dilthey, Ulrich and Schleser, Markus},
  title     = {Composite improvement of textile reinforced concrete by polymeric impregnation of the textiles},
  series = {International Symposium Polymers in Concrete : proceedings of ISPIC 2006, 2-4 April 2006 - University of Minho - Guimar{\~a}es, Portugal},
  booktitle = {International Symposium Polymers in Concrete : proceedings of ISPIC 2006, 2-4 April 2006 - University of Minho - Guimar{\~a}es, Portugal},
  editor    = {Barroso de Aguiar, Jose and Jalali, Said and Camoes, Aires and Ferrera, Rui Miguel},
  publisher = {Universidade do Minho, Departamento de Engenharia Civil},
  address   = {Guimar{\~a}es},
  organization    = {International Symposium in Concrete <2006, Guimar{\~a}es)},
  isbn      = {972-99179-1-4},
  pages     = {185 -- 192},
  year      = {2006},
  language  = {en}
}
@inproceedings{PfaffShahidiEnning2017,
  author    = {Pfaff, Raphael and Shahidi, Parham and Enning, Manfred},
  title     = {Connected freight rail rolling stock: a modular approach integrating sensors, actors and cyber physical systems for operational advantages and condition based maintenance},
  series = {Asia-Pacific Conference of the Prognostics and Health Management Society},
  booktitle = {Asia-Pacific Conference of the Prognostics and Health Management Society},
  pages     = {1 -- 7},
  year      = {2017},
  language  = {en}
}
@inproceedings{BeerHaidnWillms1995,
  author    = {Beer, Stefan and Haidn, O.J. and Willms, Herbert},
  title     = {Control of stoichiometric propellant supply in an H2/O2-spinning reserve system},
  series = {Combustion technologies for a clean environment : selected papers from the proceedings of the first international conference, Vilamoura, Portugal, September 3 - 6, 1991. - (Energy, combustion and the environment ;1)},
  booktitle = {Combustion technologies for a clean environment : selected papers from the proceedings of the first international conference, Vilamoura, Portugal, September 3 - 6, 1991. - (Energy, combustion and the environment ;1)},
  editor    = {Carvalho, Maria da Gra{\c{c}}a},
  publisher = {Gordon and Breach},
  address   = {Basel [u.a.]},
  isbn      = {2-88124-619-2},
  pages     = {825 -- 838},
  year      = {1995},
  language  = {en}
}
@inproceedings{WollertPlessmann1993,
  author    = {Wollert, J{\"o}rg and Plessmann, K. W.},
  title     = {Controlling processes by operating-point based hybride observers},
  series = {EUFIT '93 : September 7 - 10, 1993, Eurogress Aachen, Germany, proceedings / First European Congress on Fuzzy and Intelligent Technologies},
  booktitle = {EUFIT '93 : September 7 - 10, 1993, Eurogress Aachen, Germany, proceedings / First European Congress on Fuzzy and Intelligent Technologies},
  publisher = {Verl. d. Augustinus Buchh.},
  address   = {Aachen},
  organization    = {EUFIT <1, 1993, Aachen>},
  isbn      = {3-86073-176-9},
  pages     = {1151 -- 1155},
  year      = {1993},
  language  = {en}
}
@article{EnningStuetzleVierecketal.2006,
  author    = {Enning, Manfred and St{\"u}tzle, Thorsten and Viereck, Uwe and Stribersky, Anton},
  title     = {Creepage control for use in wheelslide protection systems / St{\"u}tzle, Thorsten ; Viereck, Uwe ; Stribersky, Anton ; Rulka, Wolfgang ; Enning, Manfred ; Abel, Dirk},
  series = {Control in transportation systems : proceedings of the 11th IFAC symposium on control in transportation systems (CTS 2006), August 29-31, 2006, Delft, the Netherlands / International Federation of Automatic Control},
  journal   = {Control in transportation systems : proceedings of the 11th IFAC symposium on control in transportation systems (CTS 2006), August 29-31, 2006, Delft, the Netherlands / International Federation of Automatic Control},
  isbn      = {0742-5953},
  pages     = {1 CD-ROM},
  year      = {2006},
  language  = {en}
}
@article{KaemperSchmittGuentherodtetal.1987,
  author    = {K{\"a}mper, Klaus-Peter and Schmitt, W. and G{\"u}ntherodt, G. and Gambino, R. J.},
  title     = {CrO2—A New Half-Metallic Ferromagnet? K{\"a}mper, K.-P.; Schmitt, W.; G{\"u}ntherodt, G.; Gambino, R. J., Ruf, R.},
  series = {Physical Review Letters. 59 (1987), H. 24},
  journal   = {Physical Review Letters. 59 (1987), H. 24},
  isbn      = {1079-7114},
  pages     = {2788 -- 2791},
  year      = {1987},
  language  = {en}
}
@article{AbbasBalcBremenetal.2022,
  author    = {Abbas, Karim and Balc, Nicolae and Bremen, Sebastian and Skupin, Marco},
  title     = {Crystallization and aging behavior of polyetheretherketone PEEK within rapid tooling and rubber molding},
  series = {Journal of Manufacturing and Materials Processing},
  volume    = {6},
  journal   = {Journal of Manufacturing and Materials Processing},
  number    = {5},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {2504-4494},
  doi       = {10.3390/jmmp6050093},
  pages     = {1 -- 12},
  year      = {2022},
  abstract  = {In times of short product life cycles, additive manufacturing and rapid tooling are important methods to make tool development and manufacturing more efficient. High-performance polymers are the key to mold production for prototypes and small series. However, the high temperatures during vulcanization injection molding cause thermal aging and can impair service life. The extent to which the thermal stress over the entire process chain stresses the material and whether it leads to irreversible material aging is evaluated. To this end, a mold made of PEEK is fabricated using fused filament fabrication and examined for its potential application. The mold is heated to 200 ◦C, filled with rubber, and cured. A differential scanning calorimetry analysis of each process step illustrates the crystallization behavior and first indicates the material resistance. It shows distinct cold crystallization regions at a build chamber temperature of 90 ◦C. At an ambient temperature above Tg, crystallization of 30\% is achieved, and cold crystallization no longer occurs. Additional tensile tests show a decrease in tensile strength after ten days of thermal aging. The steady decrease in recrystallization temperature indicates degradation of the additives. However, the tensile tests reveal steady embrittlement of the material due to increasing crosslinking.},
  language  = {en}
}
@techreport{Wollert2008,
  author    = {Wollert, J{\"o}rg},
  title     = {DANA - Dynamische Ad-hoc Netzwerke in der Automatisierungstechnik. Schlussbericht. Laufzeit: 01.09.2004 - 30.06.2008 (BMBF-Forschungsbericht; F{\"o}rderkennzeichen 1714X04)},
  publisher = {BMBF},
  address   = {Berlin},
  pages     = {145 S.},
  year      = {2008},
  language  = {de}
}
@book{Wollert2002,
  author    = {Wollert, J{\"o}rg},
  title     = {Das Bluetooth Handbuch: Technologie, Software, Einsatzfelder, Systementwicklung, Wettbewerb},
  publisher = {Franzis},
  address   = {M{\"u}nchen},
  isbn      = {3-7723-5323-1},
  pages     = {333 S.},
  year      = {2002},
  language  = {de}
}
@book{Knepper1992,
  author    = {Knepper, Ludger},
  title     = {Das Rolltor : Bauwerk{\"o}ffnungs-Abschl{\"u}sse ; Aufbau, Konstruktion, Hinweise zur Berechnung / von Horst G{\"u}nter Steuff ; unter Mitarb. von Ludger Knepper ; Frieder Thiele},
  publisher = {Werner},
  address   = {D{\"u}sseldorf},
  isbn      = {3-8041-3165-4},
  pages     = {XI, 227 S. : zahlr. graph. Darst.},
  year      = {1992},
  language  = {de}
}
@article{Starke1999,
  author    = {Starke, G{\"u}nther},
  title     = {Das Verbundvorhaben 'PROJOIN'. Motivation und Ziele.},
  series = {Qualit{\"a}tsorientierte Schweißtechnik als Wettbewerbsfaktor : neue Wege f{\"u}r die Fertigung von morgen ; Ergebnisse einer vom BMBF gef{\"o}rderten europ{\"a}ischen Forschungskooperation im Rahmen von EUREKA-FAKTORY] / P. Drews ; G. K{\"o}hler (Hrsg.)},
  journal   = {Qualit{\"a}tsorientierte Schweißtechnik als Wettbewerbsfaktor : neue Wege f{\"u}r die Fertigung von morgen ; Ergebnisse einer vom BMBF gef{\"o}rderten europ{\"a}ischen Forschungskooperation im Rahmen von EUREKA-FAKTORY] / P. Drews ; G. K{\"o}hler (Hrsg.)},
  publisher = {DVS-Verl},
  address   = {D{\"u}sseldorf},
  isbn      = {3-87155-663-7},
  pages     = {7 -- 14},
  year      = {1999},
  language  = {de}
}
@inproceedings{StieglitzWollert2010,
  author    = {Stieglitz, Kristian and Wollert, J{\"o}rg},
  title     = {Database driven modernization and expansion of storage systems},
  series = {Proceedings : the 3rd International Multi-Conference on Engineering and Technological Innovation : June 29th - July 2nd, 2010, Orlando, Florida, USA ; vol. 2},
  booktitle = {Proceedings : the 3rd International Multi-Conference on Engineering and Technological Innovation : June 29th - July 2nd, 2010, Orlando, Florida, USA ; vol. 2},
  publisher = {IIIS},
  address   = {Winter Garden, Fla.},
  organization    = {International Multi-Conference on Engineering and Technological Innovation <3, 2010, Orlando, Fla.>},
  isbn      = {978-1-936338-03-0},
  pages     = {180 -- 183},
  year      = {2010},
  language  = {de}
}
@article{PfaffSchmidt2016,
  author    = {Pfaff, Raphael and Schmidt, Bernd},
  title     = {Daten in der Cloud - und dann?},
  series = {Deine Bahn},
  journal   = {Deine Bahn},
  number    = {6},
  publisher = {Bahn-Fachverlag},
  address   = {Berlin},
  issn      = {0948-7263},
  pages     = {50 -- 55},
  year      = {2016},
  abstract  = {Schienenverkehrssysteme stehen in zunehmendem Wettbewerb, sowohl untereinander als auch mit anderen Verkehrstr{\"a}gern. Als wichtiger Aspekt zur Steigerung der Kosteneffizienz wird die Digitalisierung des Betriebs und der Fahrzeuge betrachtet. {\"U}ber eine Prognose der Ausfallwahrscheinlichkeit bzw. Restlebensdauer von Subsystemen k{\"o}nnen mittels Digitalisierung die Instandhaltungskosten gesenkt werden. Die geringen Fehlerraten im System Bahn machen die Nutzung besonderer Simulationstechniken notwendig. In diesem Beitrag wird gezeigt, wie sich die Subsystemverf{\"u}gbarkeit aus den beobachteten Fehlerraten der Teilfunktionen vorhersagen l{\"a}sst.},
  language  = {de}
}
@article{GrundmannKramerKonrath2001,
  author    = {Grundmann, Reinhard and Kramer, C. and Konrath, B.},
  title     = {Der Aeroakustik-Fahrzeugwindkanal von Ford.},
  series = {Automobiltechnische Zeitschrift - ATZ. 103 (2001), H. 10},
  journal   = {Automobiltechnische Zeitschrift - ATZ. 103 (2001), H. 10},
  isbn      = {0001-2785},
  pages     = {932 -- 938},
  year      = {2001},
  language  = {de}
}
@article{GrundmannBommesKlaesetal.1995,
  author    = {Grundmann, Reinhard and Bommes, Leonhard and Klaes, Klaus and Kramer, Carl u.a.},
  title     = {Der Einfluß der Schaufelgestalt von Zentrifugall{\"u}ftern auf deren Leistung und Ger{\"a}uschpegel},
  series = {Noise Control Engineering Journal. 43 (1995), H. 4},
  journal   = {Noise Control Engineering Journal. 43 (1995), H. 4},
  isbn      = {0736-2501},
  pages     = {91 -- 101},
  year      = {1995},
  language  = {de}
}
@article{Wollert2014,
  author    = {Wollert, J{\"o}rg},
  title     = {Der Embedded Wireless-Report},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler ; Sonderh. Wireless : Fachmedium f{\"u}r Entwicklungen funkbasierter Systeme},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler ; Sonderh. Wireless : Fachmedium f{\"u}r Entwicklungen funkbasierter Systeme},
  publisher = {WEKA-Fachmedien},
  address   = {Haar},
  issn      = {0013-5658},
  pages     = {18 -- 25},
  year      = {2014},
  language  = {de}
}
@article{Knepper1985,
  author    = {Knepper, Ludger},
  title     = {Der moderne Luftfrachtverkehr - leistungsfaehig durch seine bodengebundenen Umschlagssysteme},
  pages     = {60 -- 69},
  year      = {1985},
  language  = {de}
}
@incollection{Reichert2014,
  author    = {Reichert, Walter},
  title     = {Der Vertriebsingenieur: Ausbildung und Beruf},
  series = {Berufsstart Technik : das Karriereportal f{\"u}r junge Akademiker ; Ingenieure, Naturwissenschaftler, Informatiker},
  booktitle = {Berufsstart Technik : das Karriereportal f{\"u}r junge Akademiker ; Ingenieure, Naturwissenschaftler, Informatiker},
  publisher = {Resch},
  address   = {Großenkneten},
  pages     = {456 -- 458},
  year      = {2014},
  language  = {de}
}
@article{Grundmann1992,
  author    = {Grundmann, Reinhard},
  title     = {Design Criteria for Aeroacoustic Wind Tunnels},
  year      = {1992},
  language  = {en}
}
@article{FrankoDuKallweitetal.2020,
  author    = {Franko, Josef and Du, Shengzhi and Kallweit, Stephan and Duelberg, Enno Sebastian and Engemann, Heiko},
  title     = {Design of a Multi-Robot System for Wind Turbine Maintenance},
  series = {Energies},
  volume    = {13},
  journal   = {Energies},
  number    = {10},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {1996-1073},
  doi       = {10.3390/en13102552},
  pages     = {Article 2552},
  year      = {2020},
  abstract  = {The maintenance of wind turbines is of growing importance considering the transition to renewable energy. This paper presents a multi-robot-approach for automated wind turbine maintenance including a novel climbing robot. Currently, wind turbine maintenance remains a manual task, which is monotonous, dangerous, and also physically demanding due to the large scale of wind turbines. Technical climbers are required to work at significant heights, even in bad weather conditions. Furthermore, a skilled labor force with sufficient knowledge in repairing fiber composite material is rare. Autonomous mobile systems enable the digitization of the maintenance process. They can be designed for weather-independent operations. This work contributes to the development and experimental validation of a maintenance system consisting of multiple robotic platforms for a variety of tasks, such as wind turbine tower and rotor blade service. In this work, multicopters with vision and LiDAR sensors for global inspection are used to guide slower climbing robots. Light-weight magnetic climbers with surface contact were used to analyze structure parts with non-destructive inspection methods and to locally repair smaller defects. Localization was enabled by adapting odometry for conical-shaped surfaces considering additional navigation sensors. Magnets were suitable for steel towers to clamp onto the surface. A friction-based climbing ring robot (SMART— Scanning, Monitoring, Analyzing, Repair and Transportation) completed the set-up for higher payload. The maintenance period could be extended by using weather-proofed maintenance robots. The multi-robot-system was running the Robot Operating System (ROS). Additionally, first steps towards machine learning would enable maintenance staff to use pattern classification for fault diagnosis in order to operate safely from the ground in the future.},
  language  = {en}
}
@book{Pfeiffer1997,
  author    = {Pfeiffer, Johann},
  title     = {Design und Herstellen von Werkzeugen mit Freiformfl{\"a}chen},
  publisher = {Fachhochsch.},
  address   = {Aachen},
  year      = {1997},
  language  = {de}
}
@inproceedings{HartmannKallweitFeldusenetal.2012,
  author    = {Hartmann, Axel and Kallweit, Stephan and Feldusen, Antje and Schr{\"o}der, Wolfgang},
  title     = {Detection of upstream propagating sound waves at buffet flow using high-speed PIV},
  pages     = {14 S. : graph. Darst.},
  year      = {2012},
  language  = {en}
}
@inproceedings{SchleupenEngemannBagherietal.2017,
  author    = {Schleupen, Josef and Engemann, Heiko and Bagheri, Mohsen and Kallweit, Stephan and Dahmann, Peter},
  title     = {Developing a climbing maintenance robot for tower and rotor blade service of wind turbines},
  series = {Advances in Robot Design and Intelligent Control : Proceedings of the 25th Conference on Robotics in Alpe-Adria-Danube Region (RAAD16)},
  booktitle = {Advances in Robot Design and Intelligent Control : Proceedings of the 25th Conference on Robotics in Alpe-Adria-Danube Region (RAAD16)},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-319-49058-8},
  doi       = {10.1007/978-3-319-49058-8_34},
  pages     = {310 -- 319},
  year      = {2017},
  language  = {en}
}
@inproceedings{VedralKruseWollert2007,
  author    = {Vedral, Andreas and Kruse, Thomas and Wollert, J{\"o}rg},
  title     = {Development and performance evaluation of an antenna diversity module for industrial communication based on IEEE 802.15.4},
  series = {12th IEEE International Conference on Emerging Technologies and Factory Automation : ETFA 2007 : proceedings : 25-28 Sept. 2007, Patras, Greece},
  booktitle = {12th IEEE International Conference on Emerging Technologies and Factory Automation : ETFA 2007 : proceedings : 25-28 Sept. 2007, Patras, Greece},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  organization    = {International Conference on Emerging Technologies and Factory Automation <12, 2007, Patras, Greece>},
  isbn      = {1424408261 ; 9781424408269},
  doi       = {10.1109/EFTA.2007.4416769},
  pages     = {177 -- 186},
  year      = {2007},
  language  = {en}
}
@article{EnningJenayehMuelleretal.1997,
  author    = {Enning, Manfred and Jenayeh, I. and M{\"u}ller, C. and Rake, Heinrich},
  title     = {Development and realization of a manipulator for automatic decoupling of freight cars in marshalling yards / Jenayeh, I. ; M{\"u}ller, C. ; Enning, Manfred ; Rake, Heinrich ; Peter, J.},
  year      = {1997},
  language  = {en}
}
@article{StarkeDrews1985,
  author    = {Starke, G{\"u}nther and Drews, P.},
  title     = {Development approaches for advanced control in automated arc welding},
  pages     = {115 -- 124},
  year      = {1985},
  language  = {en}
}
@article{Kaemper1996,
  author    = {K{\"a}mper, Klaus-Peter},
  title     = {Development of low-cost injection moulded micropumps. Entwicklung von kosteng{\"u}nstigen, mittels Spritzguß hergestellten Mikropumpen / D{\"o}pper, J. (u.a.)},
  series = {Actuator 96 : Conference Proceedings ; 5th International Conference on New Actuators ; 26- 28 June, Bremen, Germany / Ed.: Hubert Borgmann. Publ. by: AXON Technology Consult GmbH},
  journal   = {Actuator 96 : Conference Proceedings ; 5th International Conference on New Actuators ; 26- 28 June, Bremen, Germany / Ed.: Hubert Borgmann. Publ. by: AXON Technology Consult GmbH},
  address   = {Bremen},
  pages     = {37 -- 40},
  year      = {1996},
  language  = {en}
}
@article{KaemperLehrEhrfeldetal.1997,
  author    = {K{\"a}mper, Klaus-Peter and Lehr, H. and Ehrfeld, W. and Hagemann, B.},
  title     = {Development of micro and millimotors. Lehr, H.; Ehrfeld, W.; Hagemann, B.; K{\"a}mper, K.-P.; Michel, F.; Schulz, C.; Th{\"u}rigen C.},
  series = {Minimally Invasive Therapy and Allied Technologies. 6 (1997)},
  journal   = {Minimally Invasive Therapy and Allied Technologies. 6 (1997)},
  isbn      = {1364-5706},
  year      = {1997},
  language  = {en}
}
@inproceedings{VedralWollert2006,
  author    = {Vedral, Andreas and Wollert, J{\"o}rg},
  title     = {Die Analyse industrieller funkgest{\"u}tzter Kommunikationskan{\"a}le},
  series = {Elektrische Automatisierung - Systeme und Komponenten : SPS/IPC/Drives 2006, Fachmesse \& Kongress, 28. - 30. Nov. 2006, N{\"u}rnberg},
  booktitle = {Elektrische Automatisierung - Systeme und Komponenten : SPS/IPC/Drives 2006, Fachmesse \& Kongress, 28. - 30. Nov. 2006, N{\"u}rnberg},
  publisher = {VDE-Verl.},
  address   = {Berlin},
  isbn      = {9783800729944},
  pages     = {279 -- 288},
  year      = {2006},
  language  = {de}
}
@article{KaemperPicardSchuetze2005,
  author    = {K{\"a}mper, Klaus-Peter and Picard, A. and Sch{\"u}tze, A.},
  title     = {Die Ausbildungsfoundry pro-mst und das virtuelle Technologielabor: Ein Konzept f{\"u}r eine exzellente praktische MST-Ausbildung in einem modernen Reinraum zu niedrigen Gesamtkosten. Picard, A.; K{\"a}mper, K.-P.; Sch{\"u}tze, A.},
  series = {Mikrosystemtechnik-Kongress 2005 : 10. bis 12. Oktober 2005 in Freiburg ; gemeinsame Veranstaltung von: Bundesministerium f{\"u}r Bildung und Forschung (BMBF) ... / organisiert von: GMM VDE/VDI-Gesellschaft Mikroelektronik, Mikro- und Feinwerktechnik ... Chairman: Roland Zengerle},
  journal   = {Mikrosystemtechnik-Kongress 2005 : 10. bis 12. Oktober 2005 in Freiburg ; gemeinsame Veranstaltung von: Bundesministerium f{\"u}r Bildung und Forschung (BMBF) ... / organisiert von: GMM VDE/VDI-Gesellschaft Mikroelektronik, Mikro- und Feinwerktechnik ... Chairman: Roland Zengerle},
  publisher = {VDE-Verl.},
  address   = {Berlin},
  isbn      = {3-8007-2926-1},
  pages     = {127},
  year      = {2005},
  language  = {de}
}
@article{PlessmannWollertFiedler1995,
  author    = {Pleßmann, K. W. and Wollert, J{\"o}rg and Fiedler, J{\"o}rg},
  title     = {Die ganzheitliche und objektorientierte Prozesssteuerung - eine Vision?},
  series = {CIM-Management : Produkte, Strategien, Entscheidungshilfen},
  volume    = {11},
  journal   = {CIM-Management : Produkte, Strategien, Entscheidungshilfen},
  number    = {2},
  issn      = {0179-2679},
  pages     = {56 -- 60},
  year      = {1995},
  language  = {de}
}
@book{GauchelDittrich1985,
  author    = {Gauchel, Joachim and Dittrich, G{\"u}nter},
  title     = {Die kinematische Analyse von mehrgliedrigen ebenen Kurbelgetrieben sowie die Synthese von sechgliedrigen Kurbelgetrieben zur Gliedlagenerf{\"u}llung : Bericht d. Inst. f{\"u}r Getriebetechnik u. Maschinendynamik d. Rhein.-Westf. Techn. Hochsch. Aaachen},
  publisher = {VDI-Verl.},
  address   = {D{\"u}sseldorf},
  pages     = {133 S. : graph. Darst., Tab.},
  year      = {1985},
  language  = {de}
}
@article{WollertKruseVedral2007,
  author    = {Wollert, J{\"o}rg and Kruse, Thomas and Vedral, Andreas},
  title     = {Die Kraft der drei Antennen : zuverl{\"a}ssige Funkkommunikation f{\"u}r die Automatisierungstechnik},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler ; Sonderh. Wireless : Fachmedium f{\"u}r Entwicklungen funkbasierter Systeme},
  volume    = {56},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler ; Sonderh. Wireless : Fachmedium f{\"u}r Entwicklungen funkbasierter Systeme},
  number    = {Sonderh. 2},
  issn      = {0013-5658; 1611-5120},
  pages     = {36 -- 42},
  year      = {2007},
  language  = {de}
}
@article{Wollert1999,
  author    = {Wollert, J{\"o}rg},
  title     = {Die Kunst des Weglassens : Windows NT Embedded - Was die neue Version vom Standard-NT unterscheidet},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  volume    = {Bd. 48},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {H. 23},
  issn      = {0013-5658},
  pages     = {116 -- 121},
  year      = {1999},
  language  = {de}
}
@article{Kaemper2002,
  author    = {K{\"a}mper, Klaus-Peter},
  title     = {Die Mikroaktorik wird erwachsen},
  series = {INNO : innovative Technik - neue Anwendungen / Hrsg.: IVAM Fachverband f{\"u}r Mikrotechnik, Dortmund. Ausgabe 22 (2002)},
  journal   = {INNO : innovative Technik - neue Anwendungen / Hrsg.: IVAM Fachverband f{\"u}r Mikrotechnik, Dortmund. Ausgabe 22 (2002)},
  pages     = {4 -- 5},
  year      = {2002},
  language  = {de}
}
@article{PfaffEnning2017,
  author    = {Pfaff, Raphael and Enning, Manfred},
  title     = {Die nachhaltige Alternative zum autonomen Lastwagen},
  series = {Deine Bahn},
  journal   = {Deine Bahn},
  number    = {10},
  pages     = {22 -- 26},
  year      = {2017},
  language  = {de}
}
@article{Wollert2005,
  author    = {Wollert, J{\"o}rg},
  title     = {Die n{\"a}chste "Generation Wireless" : Kommunikation mit hoher Bandbreite wird mobil},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler ; Sonderh. Wireless : Fachmedium f{\"u}r Entwicklungen funkbasierter Systeme},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler ; Sonderh. Wireless : Fachmedium f{\"u}r Entwicklungen funkbasierter Systeme},
  number    = {H. 2},
  issn      = {0013-5658 ; 1611-5120},
  pages     = {40 -- 44},
  year      = {2005},
  language  = {de}
}
@article{Wollert1998,
  author    = {Wollert, J{\"o}rg},
  title     = {Die Produktionslogistik der Front- und Heckmodule f{\"u}r die Smart-Montage in Hambach},
  series = {Logistik f{\"u}r Unternehmen : das Fachmagazin der internen und externen Logistik},
  journal   = {Logistik f{\"u}r Unternehmen : das Fachmagazin der internen und externen Logistik},
  issn      = {0930-7834},
  pages     = {48 -- 51},
  year      = {1998},
  language  = {de}
}
@article{Klocke1995,
  author    = {Klocke, Martina},
  title     = {Die Situation von Ingenieurinnen in Europa - ein L{\"a}ndervergleich},
  series = {Neue Impulse (1995)},
  journal   = {Neue Impulse (1995)},
  isbn      = {0943-4240},
  pages     = {7 -- 16},
  year      = {1995},
  language  = {de}
}
@article{Klocke1996,
  author    = {Klocke, Martina},
  title     = {Die Situation von Ingenieurinnen in Europa - ein L{\"a}ndervergleich},
  series = {Berufsziel: Ingenieurin : Aufbruch in die/der Technik / hrsg. von Renate Kosuch},
  journal   = {Berufsziel: Ingenieurin : Aufbruch in die/der Technik / hrsg. von Renate Kosuch},
  publisher = {Deutscher Studien-Verl.},
  address   = {Weinheim},
  isbn      = {3-89271-645-5},
  pages     = {26 -- 38},
  year      = {1996},
  language  = {de}
}
@article{FrohbergAnik1984,
  author    = {Frohberg, Martin G. and Anik, Sabri},
  title     = {Die Vorausbestimmung der Stickstoffl{\"o}slichkeit in bin{\"a}ren Eisenschmelzen},
  series = {Archiv f{\"u}r das Eisenh{\"u}ttenwesen : Fachberichte},
  volume    = {55},
  journal   = {Archiv f{\"u}r das Eisenh{\"u}ttenwesen : Fachberichte},
  number    = {8},
  issn      = {0003-8962},
  pages     = {365 -- 367},
  year      = {1984},
  language  = {de}
}
@article{Thomas2019,
  author    = {Thomas, Axel},
  title     = {Die Wiederbelebung der Mitarbeiterwohnungsidee bei kommunalen Unternehmen},
  series = {VM Verwaltung und Management},
  volume    = {25},
  journal   = {VM Verwaltung und Management},
  number    = {6},
  publisher = {Nomos-Verl.-Ges.},
  address   = {Baden-Baden},
  issn      = {0947-9856},
  doi       = {10.5771/0947-9856-2019-6-286},
  pages     = {286 -- 291},
  year      = {2019},
  language  = {de}
}
@inproceedings{UlmerMostafaWollert2022,
  author    = {Ulmer, Jessica and Mostafa, Youssef and Wollert, J{\"o}rg},
  title     = {Digital Twin Academy: From Zero to Hero through individual learning experiences},
  series = {Tagungsband AALE 2022 / Herausgegeben von der Hochschule f{\"u}r Technik, Wirtschaft und Kultur Leipzig},
  booktitle = {Tagungsband AALE 2022 / Herausgegeben von der Hochschule f{\"u}r Technik, Wirtschaft und Kultur Leipzig},
  isbn      = {978-3-910103-00-9},
  doi       = {10.33968/2022.33},
  url       = {http://nbn-resolving.de/urn:nbn:de:bsz:l189-qucosa2-776097},
  pages     = {1 -- 9},
  year      = {2022},
  abstract  = {Digital twins are seen as one of the key technologies of Industry 4.0. Although many research groups focus on digital twins and create meaningful outputs, the technology has not yet reached a broad application in the industry. The main reasons for this imbalance are the complexity of the topic, the lack of specialists, and the unawareness of the twin opportunities. The project "Digital Twin Academy" aims to overcome these barriers by focusing on three actions: Building a digital twin community for discussion and exchange, offering multi-stage training for various knowledge levels, and implementing realworld use cases for deeper insights and guidance. In this work, we focus on creating a flexible learning platform that allows the user to select a training path adjusted to personal knowledge and needs. Therefore, a mix of basic and advanced modules is created and expanded by individual feedback options. The usage of personas supports the selection of the appropriate modules.},
  language  = {en}
}
@misc{Gebhardt2005,
  author    = {Gebhardt, Andreas},
  title     = {Digitale Regelungstechnik},
  year      = {2005},
  abstract  = {Grundlagen (Prinzip, Komponenten, Abtastung, Aliasing) Algorithmus (Implementierung, Pseudo Code, Ermittlung der Faktoren) Beispiel},
  language  = {de}
}
@book{PfeifferKnepper1998,
  author    = {Pfeiffer, Johann and Knepper, Ludger},
  title     = {Diplom Ingenieur/Diplom Ingenieurin (Fachhochschule) Maschinenbau Konstruktionstechnik},
  publisher = {Bertelsmann},
  address   = {Bielefeld},
  pages     = {Losebl.-Ausg.},
  year      = {1998},
  language  = {de}
}
@book{KnepperPfeiffer1999,
  author    = {Knepper, Ludger and Pfeiffer, Johann},
  title     = {Diplom-Ingenieur / Diplom-Ingenieurin (Fachhochschule) Maschinenbau, Energie- und W{\"a}rmetechnik},
  publisher = {Bertelsmann},
  address   = {Bielefeld},
  pages     = {Loseblattausg.},
  year      = {1999},
  language  = {de}
}