@article{ReisgenSchleserMokrovetal.2012, author = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Zabirov, Alexander and F{\"u}ssel, Uwe and Schnick, Michael and Hertel, Martin and Jaeckel, Sebastian}, title = {Modelling and visualisation of the GMA process}, series = {Welding and Cutting}, volume = {11}, journal = {Welding and Cutting}, number = {4}, publisher = {DVS Verlag}, address = {D{\"u}sseldorf}, issn = {1612-3433}, pages = {242 -- 249}, year = {2012}, language = {en} } @article{ReisgenSchleserSchiebahn2013, author = {Reisgen, Uwe and Schleser, Markus and Schiebahn, Alexander}, title = {Untersuchung zum Einfluss von Maschineneigenschaften von Schweißzangen zum Widerstandspunktschweißen auf das Schweißergebnis}, series = {Schweissen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren}, volume = {Bd. 65}, journal = {Schweissen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren}, number = {H. 6}, publisher = {DVS Verl.}, address = {D{\"u}sseldorf}, issn = {0036-7184}, pages = {309 -- 313}, year = {2013}, language = {de} } @article{RamazaniLiMukherjeeetal.2013, author = {Ramazani, Ali and Li, Yang and Mukherjee, Krishnendu and Prahl, Ulrich and Bleck, Wolfgang and Abdurakhmanov, Aydemir and Schleser, Markus and Reisgen, Uwe}, title = {Microstructure evolution simulation in hot rolled DP600 steel during gas metal arc welding}, series = {Computational materials science}, volume = {Vol. 68}, journal = {Computational materials science}, publisher = {Elsevier}, address = {Amsterdam}, issn = {1879-0801 (E-Book); 0927-0256 (Print)}, pages = {107 -- 116}, year = {2013}, language = {en} } @incollection{Schleser2013, author = {Schleser, Markus}, title = {F{\"u}gen f{\"u}r die Elektromobilit{\"a}t}, series = {Innovation durch Kooperation : wie der Mittelstand durch Zusammenarbeit mit den Hochschulen seine Wettbewerbsf{\"a}higkeit steigert : Festschrift f{\"u}r Prof. Dr. rer. nat. Johannes Gartzen / Thomas Gartzen, Ute Gartzen (Hrsg.)}, booktitle = {Innovation durch Kooperation : wie der Mittelstand durch Zusammenarbeit mit den Hochschulen seine Wettbewerbsf{\"a}higkeit steigert : Festschrift f{\"u}r Prof. Dr. rer. nat. Johannes Gartzen / Thomas Gartzen, Ute Gartzen (Hrsg.)}, publisher = {Apprimus Verlag}, address = {Aachen}, isbn = {978-3-86359-136-6}, pages = {65 -- 70}, year = {2013}, language = {de} } @inproceedings{ReisgenSchleserMokrovetal.2010, author = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Schmidt, A. and Rossiter, E. and Loose, T.}, title = {Durchg{\"a}ngige Schweißsimulation der Eigenspannung und des Gef{\"u}gezustands auf Basis realer Schweißstromquellenparameter}, series = {DVS congress 2010 : Große Schweißtechnische Tagung ; Studentenkongress ; Statusseminar "Schneidtechnik" ; Abschlusskolloquium zum AiF-Forschungscluster "Integration des R{\"u}hrreibschweißens in Fertigungsprozessketten" ; Vortr{\"a}ge der Veranstaltung in N{\"u}rnberg am 27. und 28. September 2010. (DVS-Berichte ; 267)}, booktitle = {DVS congress 2010 : Große Schweißtechnische Tagung ; Studentenkongress ; Statusseminar "Schneidtechnik" ; Abschlusskolloquium zum AiF-Forschungscluster "Integration des R{\"u}hrreibschweißens in Fertigungsprozessketten" ; Vortr{\"a}ge der Veranstaltung in N{\"u}rnberg am 27. und 28. September 2010. (DVS-Berichte ; 267)}, publisher = {DVS Media}, address = {D{\"u}sseldorf}, organization = {Deutscher Verband f{\"u}r Schweißen und Verwandte Verfahren ; Große Schweißtechnische Tagung <2010, N{\"u}rnberg>}, isbn = {978-3-87155-592-3}, pages = {37 -- 42}, year = {2010}, language = {de} } @book{Schleser2008, author = {Schleser, Markus}, title = {Einsatz polymerimpr{\"a}gnierter, alkaliresistenter Glastextilien zur Bewehrung zementgebundener Matrices. (Aachener Berichte F{\"u}getechnik ; Bd. 6)}, publisher = {Shaker}, address = {Aachen}, isbn = {978-3-8322-7696-6}, pages = {XVI, 129 S. : Ill., graph. Darst.}, year = {2008}, language = {de} } @techreport{Schleser2011, author = {Schleser, Markus}, title = {Untersuchung des konduktiven R{\"u}hrreibschweißens an Stahl- und Aluminiumwerkstoffen. Schlussbericht. F{\"o}rderkennzeichen: AIF 15687 N}, pages = {87 S.}, year = {2011}, language = {de} } @inproceedings{ReisgenSchleserAbdurakhmanovetal.2009, author = {Reisgen, Uwe and Schleser, Markus and Abdurakhmanov, Aydemir and Gumenyuk, Amdrej V.}, title = {Measurement method of electron beam plasma parameters by non-vacuum electron beam welding}, series = {Beam technologies \& laser application : proceedings of the VI international conference, Saint Petersburg, Sept. 23-25, 2009}, booktitle = {Beam technologies \& laser application : proceedings of the VI international conference, Saint Petersburg, Sept. 23-25, 2009}, editor = {Turichin, G.}, publisher = {Politechnical Univ.}, address = {Saint Petersburg}, organization = {Russian Academy of Science}, pages = {259 -- 267}, year = {2009}, language = {en} } @inproceedings{ReisgenSchleserAbdurakhmanovetal.2012, author = {Reisgen, Uwe and Schleser, Markus and Abdurakhmanov, Aydemir and Gumenyuk, Andrej}, title = {Application of electron beam welding to fabrication of steel-aluminium dissimilar joint}, series = {Beam technologies \& laser application : proceedings of the VII international conference, Saint Petersburg, Sept. 18-21, 2012}, booktitle = {Beam technologies \& laser application : proceedings of the VII international conference, Saint Petersburg, Sept. 18-21, 2012}, publisher = {Publ. House}, address = {Saint Petersburg}, pages = {265 -- 279}, year = {2012}, language = {en} } @inproceedings{ReisgenSchleserMokrovetal.2012, author = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Ufer, Sebastian and Guenel, Ismet and Gach, Stefan}, title = {Voruntersuchungen mit Ansys CFX zu einer Druckstufe von einem Druckstufensystem f{\"u}r das Elektronenstrahlschweißen}, series = {DVS Congress 2012 : Große Schweißtechnische Tagung, DVS-Studentenkongress ; Vortr{\"a}ge der Veranstaltungen in Saarbr{\"u}cken am 17. und 18. September 2012. (DVS-Berichte ; 286)}, booktitle = {DVS Congress 2012 : Große Schweißtechnische Tagung, DVS-Studentenkongress ; Vortr{\"a}ge der Veranstaltungen in Saarbr{\"u}cken am 17. und 18. September 2012. (DVS-Berichte ; 286)}, publisher = {DVS Media}, address = {D{\"u}sseldorf}, organization = {Deutscher Verband f{\"u}r Schweißen und Verwandte Verfahren ; Große Schweißtechnische Tagung <2012, Saarbr{\"u}cken>}, isbn = {978-3-87155-593-0}, pages = {33 -- 35}, year = {2012}, language = {de} } @book{Gebhardt2013, author = {Gebhardt, Andreas}, title = {Generative Fertigungsverfahren : Additive Manufacturing und 3D Drucken f{\"u}r Prototyping - Tooling - Produktion}, edition = {4., neu bearbeitete und erweiterte Auflage}, publisher = {Hanser}, address = {M{\"u}nchen}, isbn = {978-3-446-43651-0 ; 978-3-446-43652-7}, doi = {10.3139/9783446436527}, pages = {XXIV, 637 S. : zahlr. Ill. u. graph. Darst.}, year = {2013}, language = {de} } @article{HoetterFateriGebhardt2012, author = {H{\"o}tter, Jan-Steffen and Fateri, Miranda and Gebhardt, Andreas}, title = {Selective laser melting of metals: desktop machines open up new chances even for small companies}, series = {Advanced materials research}, volume = {622-623}, journal = {Advanced materials research}, publisher = {Trans Tech Publ.}, address = {Baech}, issn = {1662-8985 (E-Journal); 1022-6680 (Print)}, doi = {10.4028/www.scientific.net/AMR.622-623.461}, pages = {461 -- 465}, year = {2012}, abstract = {Additive manufacturing (AM) of metal parts by using Selective Laser Melting (SLM) has become a powerful tool mostly in the area of automotive, aerospace engineering and others. Especially in the field of dentistry, jewelry and related branches that require individualized or even one-of-a-kind products, the direct digital manufacturing process opens up new ways of design and manufacturing. In these fields, mostly small and medium sized businesses (SME) are operating which do not have sufficient human and economic resources to invest in this technology. But to stay competitive, the application of AM can be regarded as a necessity. In this situation a new desktop machine (Realizer SLM 50) was introduced that cost about 1/3 of a shop floor SLM machine and promises small quality parts. To find out whether the machine really is an alternative for SMEs the University of Applied Science, Aachen, Germany, designed, build and optimized typical parts from the dentistry and the jewelry branches using CoCr and silver material, the latter being new with this application. The paper describes the SLM procedure and how to find and optimize the most important parameters. The test is accompanied by digital simulation in order to verify the build parameters and to plan future builds. The procedure is shown as well as the resulting parts made from CoCr and silver material.}, language = {en} } @inproceedings{Starke2009, author = {Starke, G{\"u}nther}, title = {Robotertechnik f{\"u}r individuelle Automatisierungsl{\"o}sungen und unterschiedlichste Prozessanwendungen : 17. Internationale Fachmesse „Schweißen \& Schneiden 2009" - Stand und Entwicklungstendenzen}, series = {Schweissen und Schneiden}, booktitle = {Schweissen und Schneiden}, publisher = {DVS - Deutscher Verband f{\"u}r Schweißen und Verwandte Verfahren e.V.}, issn = {0036-7184 (Print)}, pages = {N 13 (nach Seite 716)}, year = {2009}, language = {de} } @article{StarkeAhlbehrendtBischoffetal.2009, author = {Starke, G{\"u}nther and Ahlbehrendt, Norbert and Bischoff, Rainer and Melzer, Harald and Sieber, Sven and Senk, Burkhard and Kramarczyk, Peter}, title = {RoboTOOL. Technologien f{\"u}r den ortsflexiblen Einsatz von Robotern bei tempor{\"a}ren Arbeitsaufgaben in der Fertigung}, series = {wt Werkstattstechnik online}, volume = {Bd. 99}, journal = {wt Werkstattstechnik online}, number = {H. 9}, issn = {1436-4980}, pages = {661 -- 670}, year = {2009}, language = {de} } @incollection{Schmidt2014, author = {Schmidt, Herbert}, title = {Angst vor Zukunft, Lust auf Zukunft}, series = {Re|peat-Jahrbuch Treasury und Private Banking : Produkte, M{\"a}rkte und Strategien zum Nachschlagen und Verstehen}, booktitle = {Re|peat-Jahrbuch Treasury und Private Banking : Produkte, M{\"a}rkte und Strategien zum Nachschlagen und Verstehen}, publisher = {Roland Eller}, address = {Potsdam}, pages = {255 -- 269}, year = {2014}, language = {de} } @inproceedings{StarkeKunkelHahn2013, author = {Starke, G{\"u}nther and Kunkel, Thomas and Hahn, Daniel}, title = {Flexible collaboration and control of heterogeneous mechatronic devices and systems by means of an event-driven, SOA-based automation concept}, series = {2013 IEEE International Conference on Industrial Technologies (ICIT-13)}, booktitle = {2013 IEEE International Conference on Industrial Technologies (ICIT-13)}, publisher = {IEEE}, address = {Piscataway, NJ}, organization = {International Conference on Industrial Technologies <2013, Cape Town>}, isbn = {978-1-4673-4567-5 ; 978-1-4673-4569-9}, pages = {1982 -- 1987}, year = {2013}, language = {en} } @incollection{Schmidt2013, author = {Schmidt, Herbert}, title = {Finanzierungspartnerwahl durch mittelst{\"a}ndische Unternehmen}, series = {Innovation durch Kooperation : wie der Mittelstand durch Zusammenarbeit mit den Hochschulen seine Wettbewerbsf{\"a}higkeit steigert ; Festschrift f{\"u}r Prof. Dr. rer. nat. Johannes Gartzen / Thomas Gartzen, Ute Gartzen (Hrsg.)}, booktitle = {Innovation durch Kooperation : wie der Mittelstand durch Zusammenarbeit mit den Hochschulen seine Wettbewerbsf{\"a}higkeit steigert ; Festschrift f{\"u}r Prof. Dr. rer. nat. Johannes Gartzen / Thomas Gartzen, Ute Gartzen (Hrsg.)}, publisher = {Apprimus Verlag}, address = {Aachen}, isbn = {978-3-86359-136-6}, pages = {163 -- 166}, year = {2013}, language = {de} } @inproceedings{FateriGebhardtKhosravi2013, author = {Fateri, Miranda and Gebhardt, Andreas and Khosravi, Maziar}, title = {Experimental investigation of selective laser melting of lunar regolith for in-situ applications}, series = {ASME 2013 International Mechanical Engineering Congress and Exposition : San Diego, California, USA, November 15-21, 2013. Vol. 2A: Advanced manufacturing}, booktitle = {ASME 2013 International Mechanical Engineering Congress and Exposition : San Diego, California, USA, November 15-21, 2013. Vol. 2A: Advanced manufacturing}, publisher = {ASME}, organization = {American Society of Mechanical Engineers}, isbn = {978-0-7918-5618-5}, pages = {V02AT02A008}, year = {2013}, language = {en} } @article{GebhardtFateri2014, author = {Gebhardt, Andreas and Fateri, Miranda}, title = {3D-Drucken und die Anwendungen}, series = {RTejournal - Forum f{\"u}r Rapid Technologie}, volume = {11 (2014)}, journal = {RTejournal - Forum f{\"u}r Rapid Technologie}, number = {1}, issn = {1614-0923}, pages = {1 -- 9}, year = {2014}, language = {de} } @article{GebhardtHoetterZiebura2014, author = {Gebhardt, Andreas and H{\"o}tter, Jan-Steffen and Ziebura, Dawid}, title = {Impact of SLM build parameters on the surface quality}, series = {RTejournal - Forum f{\"u}r Rapid Technologien}, volume = {11 (2014)}, journal = {RTejournal - Forum f{\"u}r Rapid Technologien}, number = {1}, issn = {1614-0923}, pages = {1 -- 14}, year = {2014}, language = {de} } @incollection{Reichert2014, author = {Reichert, Walter}, title = {Der Vertriebsingenieur: Ausbildung und Beruf}, series = {Berufsstart Technik : das Karriereportal f{\"u}r junge Akademiker ; Ingenieure, Naturwissenschaftler, Informatiker}, booktitle = {Berufsstart Technik : das Karriereportal f{\"u}r junge Akademiker ; Ingenieure, Naturwissenschaftler, Informatiker}, publisher = {Resch}, address = {Großenkneten}, pages = {456 -- 458}, year = {2014}, language = {de} } @inproceedings{Gebhardt2015, author = {Gebhardt, Andreas}, title = {Generative Fertigungsverfahren in der Produktentwicklung}, series = {Spritzgießen 2015}, booktitle = {Spritzgießen 2015}, publisher = {VDI-Verlag}, address = {D{\"u}sseldorf}, organization = {VDI-Gesellschaft Kunststofftechnik (VDI-K), Baden-Baden, DE, 10.-11.Feb, 2015}, isbn = {978-3-18-234336-3}, pages = {1 -- 19}, year = {2015}, language = {de} } @incollection{KallweitGottschalkWalenta2016, author = {Kallweit, Stephan and Gottschalk, Michael and Walenta, Robert}, title = {ROS based safety concept for collaborative robots in industrial applications}, series = {Advances in robot design and intelligent control : proceedings of the 24th International Conference on Robotics in Alpe-Adria-Danube Region (RAAD). (Advances in intelligent systems and computing ; 371)}, booktitle = {Advances in robot design and intelligent control : proceedings of the 24th International Conference on Robotics in Alpe-Adria-Danube Region (RAAD). (Advances in intelligent systems and computing ; 371)}, publisher = {Springer}, address = {Cham}, organization = {International Conference on Robotics in Alpe-Adria-Danube Region <24, 2015, Bucharest>}, isbn = {978-3-319-21289-0 (Print) ; 978-3-319-21290-6 (E-Book)}, doi = {10.1007/978-3-319-21290-6_3}, pages = {27 -- 35}, year = {2016}, abstract = {The production and assembly of customized products increases the demand for flexible automation systems. One approach is to remove the safety fences that separate human and industrial robot to combine their skills. This collaboration possesses a certain risk for the human co-worker, leading to numerous safety concepts to protect him. The human needs to be monitored and tracked by a safety system using different sensors. The proposed system consists of a RGBD camera for surveillance of the common working area, an array of optical distance sensors to compensate shadowing effects of the RGBD camera and a laser range finder to detect the co-worker when approaching the work cell. The software for collision detection, path planning, robot control and predicting the behaviour of the co-worker is based on the Robot Operating System (ROS). A first prototype of the work cell shows that with advanced algorithms from the field of mobile robotics a very flexible safety concept can be realized: the robot not simply stops its movement when detecting a collision, but plans and executes an alternative path around the obstacle.}, language = {en} } @inproceedings{WiezikHoetterGebhardt2015, author = {Wiezik, P. and H{\"o}tter, Jan-Steffen and Gebhardt, Andreas}, title = {Integration des Laserpolierens in den SLM-Prozess}, series = {DVS Congress 2015, Große Schweißtechnische Tagung, DVS-Studentenkongress, F{\"u}gen von faserverst{\"a}rkten Kunststoffen, Anwendungsnahe Schweißsimulation, Vortr{\"a}ge der Veranstaltungen, N{\"u}rnberg, DE, 15.-17. Sep, 2015}, volume = {315}, booktitle = {DVS Congress 2015, Große Schweißtechnische Tagung, DVS-Studentenkongress, F{\"u}gen von faserverst{\"a}rkten Kunststoffen, Anwendungsnahe Schweißsimulation, Vortr{\"a}ge der Veranstaltungen, N{\"u}rnberg, DE, 15.-17. Sep, 2015}, publisher = {Verl. f{\"u}r Schweißen und verwandte Verfahren, DVS-Verl.}, address = {D{\"u}sseldorf}, isbn = {978-3-945023-46-4}, pages = {117 -- 120}, year = {2015}, language = {de} } @inproceedings{GregorioFatigatiKallweit2015, author = {Gregorio, Fabrizio de and Fatigati, Giovanni and Kallweit, Stephan}, title = {Tiltrotor airframe flow field characterization by SPIV}, series = {11th International Symposium on Partivle Image Velocimetry - PIV15 , Santa Barbara, California, Sept 14-16, 2015}, booktitle = {11th International Symposium on Partivle Image Velocimetry - PIV15 , Santa Barbara, California, Sept 14-16, 2015}, pages = {15 S.}, year = {2015}, language = {en} } @article{FateriGebhardt2015, author = {Fateri, Miranda and Gebhardt, Andreas}, title = {Additive manufactured mechanical disentanglement lock}, series = {RTejournal - Forum f{\"u}r Rapid Technologie}, volume = {12}, journal = {RTejournal - Forum f{\"u}r Rapid Technologie}, publisher = {Fachhochschule Aachen}, address = {Aachen}, issn = {1614-0923}, url = {http://nbn-resolving.de/urn:nbn:de:0009-2-42147}, year = {2015}, language = {en} } @inproceedings{GrossmannGabrielliHerdrichetal.2015, author = {Großmann, Agnes and Gabrielli, Roland Antonius and Herdrich, Georg and Fasoulas, Stefanos and Schnauffer, Peter and Middendorf, Peter and Fateri, Miranda and Gebhardt, Andreas}, title = {Overview of the MultiRob 3D Lunar Industrial Development Project}, series = {Conference Contribution for the 30th ISTS, Kobe, Japan, 04.07.-10.07.2015}, booktitle = {Conference Contribution for the 30th ISTS, Kobe, Japan, 04.07.-10.07.2015}, pages = {8 S.}, year = {2015}, language = {en} } @inproceedings{GabrielliSeelmannGrossmannetal.2015, author = {Gabrielli, Roland Antonius and Seelmann, J{\"u}rgen and Großmann, Agnes and Herdrich, Georg and Fasoulas, Stefanos and Middendorf, Peter and Fateri, Miranda and Gebhardt, Andreas}, title = {System Architecture of a Lunar Industry Plant Using Regolith}, series = {Conference Contribution for the 30th ISTS, Kobe, Japan, 04.07.-10.07.2015}, booktitle = {Conference Contribution for the 30th ISTS, Kobe, Japan, 04.07.-10.07.2015}, pages = {8 S.}, year = {2015}, language = {de} } @article{KesslerBalcGebhardtetal.2015, author = {Kessler, Julia and Balc, Nicolae and Gebhardt, Andreas and Abbas, Karim}, title = {Basic Research on Lattice Structures Focused on the Tensile Strength}, series = {Applied Mechanics and Materials}, volume = {Vol. 808}, journal = {Applied Mechanics and Materials}, publisher = {Trans Tech Publications}, address = {B{\"a}ch}, issn = {1662-7482}, doi = {10.4028/www.scientific.net/AMM.808.193}, pages = {193 -- 198}, year = {2015}, language = {en} } @inproceedings{FateriGebhardtGabriellietal.2015, author = {Fateri, Miranda and Gebhardt, Andreas and Gabrielli, Roland Antonius and Herdrich, Georg and Fasoulas, Stefanos and Großmann, Agnes and Schnauffer, Peter and Middendorf, Peter}, title = {Additive Manufacturing of Lunar Regolith for Extra-terrestrial Industry Plant}, series = {International Symposium on Space Technology and Science (ICTS). July 2015, Kobe, Japan}, booktitle = {International Symposium on Space Technology and Science (ICTS). July 2015, Kobe, Japan}, pages = {5 S.}, year = {2015}, language = {en} } @inproceedings{GabrielliMathiesGrossmannetal.2015, author = {Gabrielli, Roland Antonius and Mathies, Johannes and Großmann, Agnes and Herdrich, Georg and Fasoulas, Stefanos and Middendorf, Peter and Fateri, Miranda and Gebhardt, Andreas}, title = {Space Propulsion Considerations for a Lunar Take Off Industry Based on Regolith}, series = {International Symposium on Space Technology and Science (ISTS). July 2015, Kobe, Japan}, booktitle = {International Symposium on Space Technology and Science (ISTS). July 2015, Kobe, Japan}, year = {2015}, language = {en} } @inproceedings{FateriGebhardtRenftle2015, author = {Fateri, Miranda and Gebhardt, Andreas and Renftle, Georg}, title = {Additive Manufacturing of Drainage Segments for Cooling System of Crucibles Melting Furnaces}, series = {International Conference and Expo on Advanced Ceramics and Composites, (ICACC). January 2015, Florida, USA}, booktitle = {International Conference and Expo on Advanced Ceramics and Composites, (ICACC). January 2015, Florida, USA}, pages = {9 S.}, year = {2015}, abstract = {The cooling process in induction based crucible melting furnaces for Industrial applications is one of the important and challenging factors in production and safety engineering. Accordingly, proper implementation of the cooling system of the furnace using optimum cooling guides and fail-safe features are critical in order to improve the safety of the process. Regarding this, manufacturing of porous material with high electrical isolation for the drainage segments of the cooling channels is examined in this study. Consequently, various geometries with different porosities using glass and ceramic powder are fabricated using Selective Laser Sintering (SLS) process. The manufactured parts are examined in a prototype furnace testing and the feasibility of the SLS manufacturing of parts for this application is discussed.}, language = {en} } @book{Thomas2010, author = {Thomas, Axel}, title = {Rhetorische Knallfr{\"o}sche : Zitatensammlung f{\"u}r Politik und Wirtschaft}, publisher = {Neck + Heyn}, address = {Aachen}, isbn = {978-3-00-033037-7}, pages = {145 S. : Ill.}, year = {2010}, language = {de} } @book{Thomas2012, author = {Thomas, Axel}, title = {Rhetorische Knallfr{\"o}sche - reloaded : Zitatensammlung f{\"u}r Politik und Wirtschaft}, publisher = {Neck + Heyn}, address = {Aachen}, pages = {201 S. : Ill.}, year = {2012}, language = {de} } @article{FiedlerHennMelcher2014, author = {Fiedler, Gerda and Henn, Gudrun and Melcher, Karin}, title = {ANPAK - ein semesterbegleitender Anpassungskurs}, series = {Zeitschrift f{\"u}r Hochschulentwicklung}, volume = {9}, journal = {Zeitschrift f{\"u}r Hochschulentwicklung}, number = {4}, publisher = {{\"O}GHD}, address = {Wien}, issn = {2219-6994}, pages = {85 -- 100}, year = {2014}, abstract = {In Folge mehrj{\"a}hriger statistischer Untersuchungen an der FH Aachen ist unter anderem ein Eingangstest entstanden, der als Diagnosetool f{\"u}r einen erfolgreichen Studieneinstieg verwendet wird. Es hat sich herausgestellt, dass ein Testergebnis von weniger als 25 (von maximal 56 erreichbaren) Punkten die Chance auf einen erfolgreichen Studieneinstieg deutlich verringert. Ungef{\"a}hr die H{\"a}lfte aller Erstsemester hat weniger als 25 Punkte im Eingangstest. Weniger als 20 \% dieser Gruppe bestehen innerhalb eines Jahres die Klausur Mathematik 1. Die investierte Zeit von zwei Semestern ist mit Blick auf den Wissenszuwachs und damit letztendlich den Studienerfolg nicht effizient genutzt. Deshalb haben wir im WS 2013/14 einen semesterbegleitenden Anpassungskurs f{\"u}r diese Gruppe installiert. Ziel eines solchen Kurses ist es, die Student/innen innerhalb eines Jahres in die Lage zu versetzen, nach zwei Semestern problemlos den Vorlesungen in Mathematik zu folgen. Dieser Artikel beschreibt das Konzept dieses Anpassungskurses und zeigt erste Ergebnisse und Probleme des Pilotdurchgangs auf.}, language = {de} } @book{Gebhardt2014, author = {Gebhardt, Andreas}, title = {3D-Drucken : Grundlagen und Anwendungen des Additive Manufacturing (AM)}, publisher = {Hanser}, address = {M{\"u}nchen}, isbn = {978-3-446-44238-2 ; 978-3-446-44237-5}, pages = {XIII, 186 S.}, year = {2014}, language = {de} } @article{FateriGebhardt2015, author = {Fateri, Miranda and Gebhardt, Andreas}, title = {Selective Laser Melting of Soda-Lime Glass Powder}, series = {International Journal of Applied Ceramic Technology}, volume = {12}, journal = {International Journal of Applied Ceramic Technology}, number = {1}, publisher = {Wiley-Blackwell}, address = {Oxford}, issn = {1744-7402}, doi = {10.1111/ijac.12338}, pages = {53 -- 61}, year = {2015}, language = {en} } @article{FateriGebhardt2015, author = {Fateri, Miranda and Gebhardt, Andreas}, title = {Process Parameters Development of Selective Laser Melting of Lunar Regolith for On-Site Manufacturing Applications}, series = {International Journal of Applied Ceramic Technology}, volume = {12}, journal = {International Journal of Applied Ceramic Technology}, number = {1}, publisher = {Wiley-Blackwell}, address = {Oxford}, isbn = {1744-7402}, doi = {10.1111/ijac.12326}, pages = {46 -- 52}, year = {2015}, language = {en} } @inproceedings{FateriGebhardt2014, author = {Fateri, Miranda and Gebhardt, Andreas}, title = {Jewelry fabrication via selective laser melting of glass}, series = {ASME 2014 12th Biennial Conference on Engineering Systems Design and Analysis Volume 1: Applied Mechanics; Automotive Systems; Biomedical Biotechnology Engineering; Computational Mechanics; Design; Digital Manufacturing; Education; Marine and Aerospace Applications}, booktitle = {ASME 2014 12th Biennial Conference on Engineering Systems Design and Analysis Volume 1: Applied Mechanics; Automotive Systems; Biomedical Biotechnology Engineering; Computational Mechanics; Design; Digital Manufacturing; Education; Marine and Aerospace Applications}, isbn = {978-0-7918-4583-7}, doi = {10.1115/ESDA2014-20380}, pages = {V001T06A005}, year = {2014}, abstract = {Selective Laser Melting (SLM) is one of the Additive Manufacturing (AM) technologies applicable for producing complex geometries which are typically expensive or difficult to fabricate using conventional methods. This process has been extensively investigated experimentally for various metals and the fabrication process parameters have been established for different applications; however, fabricating 3D glass objects using SLM technology has remained a challenge so far although it could have many applications. This paper presents a summery on various experimental evaluations of a material database incorporating the build parameters of glass powder using the SLM process for jewelry applications.}, language = {en} } @incollection{Benner2014, author = {Benner, Joachim}, title = {Berechnungsmethoden der W{\"a}lzlagerreibung und Einflussgr{\"o}ßen}, series = {SMK 2014 : Schweizer Maschinenelemente Kolloquim 25. und 26. November 2014}, booktitle = {SMK 2014 : Schweizer Maschinenelemente Kolloquim 25. und 26. November 2014}, publisher = {TUDpress Verl. der Wissenschaften}, address = {Dresden}, isbn = {978-3-944331-81-2}, pages = {151 -- 170}, year = {2014}, language = {de} } @article{Thomas2014, author = {Thomas, Axel}, title = {Generation Y}, series = {P.T. : Magazin f{\"u}r Wirtschaft und Gesellschaft}, volume = {10}, journal = {P.T. : Magazin f{\"u}r Wirtschaft und Gesellschaft}, number = {3}, publisher = {OPS Netzwerk}, address = {Leipzig}, issn = {1860-501X}, pages = {6 -- 9}, year = {2014}, language = {de} } @article{ThomasWassenberg2014, author = {Thomas, Axel and Wassenberg, Gerd}, title = {Erfolgreich sein im Kampf um die besten Talente : Employer Branding}, series = {Wirtschaftliche Nachrichten der Industrie- und Handelskammer Aachen}, journal = {Wirtschaftliche Nachrichten der Industrie- und Handelskammer Aachen}, publisher = {IHK Aachen}, address = {Aachen}, year = {2014}, language = {de} } @inproceedings{NakagawaMichauxKallweitetal.2015, author = {Nakagawa, Masaki and Michaux, Frank and Kallweit, Stephan and Maeda, Kazuhiro}, title = {Unsteady flow measurements in the wake behind a wind-tunnel car model by using high-speed planar PIV}, series = {11TH International Symposium on Particle Image Velocimetry - PIV15 Santa Barbara, California, September 14-16, 2015}, booktitle = {11TH International Symposium on Particle Image Velocimetry - PIV15 Santa Barbara, California, September 14-16, 2015}, pages = {21 S.}, year = {2015}, abstract = {This study investigates unsteady characteristics of the wake behind a 28\%-scale car model in a wind tunnel using highspeed planar particle image velocimetry (PIV). The car model is based on a hatchback passenger car that is known to have relatively high fluctuations in its aerodynamic loads. This study primarily focuses on the lateral motion of the flow on the horizontal plane to determine the effect of the flow motion on the straight-line stability and the initial steering response of the actual car on a track. This paper first compares the flow fields in the wake behind the above mentioned model obtained using conventional and high-speed planar PIV, with sampling frequencies of 8 Hz and 1 kHz, respectively. Large asymmetrically coherent flow structures, which fluctuate at frequencies below 2 Hz, are observed in the results of highspeed PIV measurements, whereas conventional PIV is unable to capture these features of the flow owing to aliasing. This flow pattern with a laterally swaying motion is represented by opposite signs of cross-correlation coefficients of streamwise velocity fluctuations for the two sides of the car model. Effects of two aerodynamic devices that are known to reduce the fluctuation levels of the aerodynamic loads are then extensively investigated. The correlation analyses reveal that these devices indeed reduce the fluctuation levels of the flow and the correlation values around the rear combination-lamp, but it is found that the effects of these devices are different around the c-pillar.}, language = {en} } @article{Gebhardt2015, author = {Gebhardt, Andreas}, title = {3D-Druck ist {\"u}berall. Modische Accessoires, Kleidung, Medikamente, Nahrungsmittel, Autos, H{\"a}user, Waffen, B{\"u}sten, Musikinstrumente - alles geht}, series = {Kunststoffe}, volume = {105}, journal = {Kunststoffe}, number = {10}, publisher = {Hanser}, address = {M{\"u}nchen}, issn = {0023-5563}, pages = {62 -- 70}, year = {2015}, language = {de} } @inproceedings{KilicRaatschenAstanehAsletal.2015, author = {Kilic, S. A. and Raatschen, Hans-J{\"u}rgen and Astaneh-Asl, A. and Apaydin, N. M.}, title = {Finite element modeling of the Fatih Sultan Mehmet Suspension Bridge}, series = {Multi-Span Large Bridges - Proceedings of the International Conference on Multi-Span Large Bridges}, booktitle = {Multi-Span Large Bridges - Proceedings of the International Conference on Multi-Span Large Bridges}, publisher = {CRC Press}, address = {Leiden}, isbn = {9781138027572}, pages = {1169 -- 1173}, year = {2015}, language = {en} } @inproceedings{NakagawaKallweitMichauxetal.2016, author = {Nakagawa, Masaki and Kallweit, Stephan and Michaux, Frank and Hojo, Teppei}, title = {Typical Velocity Fields and Vortical Structures around a Formula One Car, based on Experimental Investigations using Particle Image Velocimetry}, series = {SAE International Journal of Passenger Cars - Mechanical Systems}, booktitle = {SAE International Journal of Passenger Cars - Mechanical Systems}, issn = {1946-4002}, doi = {10.4271/2016-01-1611}, pages = {18 S.}, year = {2016}, language = {en} } @book{GebhardtHoetter2016, author = {Gebhardt, Andreas and H{\"o}tter, Jan-Steffen}, title = {Additive manufacturing : 3D printing for prototyping and manufacturing}, publisher = {Hanser Publishers}, address = {Munich}, isbn = {978-1-56990-582-1 ; 978-1-56990-583-8}, pages = {591 S.}, year = {2016}, language = {en} } @article{AbbasBalcBremenetal.2022, author = {Abbas, Karim and Balc, Nicolae and Bremen, Sebastian and Skupin, Marco}, title = {Crystallization and aging behavior of polyetheretherketone PEEK within rapid tooling and rubber molding}, series = {Journal of Manufacturing and Materials Processing}, volume = {6}, journal = {Journal of Manufacturing and Materials Processing}, number = {5}, publisher = {MDPI}, address = {Basel}, issn = {2504-4494}, doi = {10.3390/jmmp6050093}, pages = {1 -- 12}, year = {2022}, abstract = {In times of short product life cycles, additive manufacturing and rapid tooling are important methods to make tool development and manufacturing more efficient. High-performance polymers are the key to mold production for prototypes and small series. However, the high temperatures during vulcanization injection molding cause thermal aging and can impair service life. The extent to which the thermal stress over the entire process chain stresses the material and whether it leads to irreversible material aging is evaluated. To this end, a mold made of PEEK is fabricated using fused filament fabrication and examined for its potential application. The mold is heated to 200 ◦C, filled with rubber, and cured. A differential scanning calorimetry analysis of each process step illustrates the crystallization behavior and first indicates the material resistance. It shows distinct cold crystallization regions at a build chamber temperature of 90 ◦C. At an ambient temperature above Tg, crystallization of 30\% is achieved, and cold crystallization no longer occurs. Additional tensile tests show a decrease in tensile strength after ten days of thermal aging. The steady decrease in recrystallization temperature indicates degradation of the additives. However, the tensile tests reveal steady embrittlement of the material due to increasing crosslinking.}, language = {en} } @article{ZieburaBremenSchleifenbaumetal.2018, author = {Ziebura, Dawid and Bremen, Sebastian and Schleifenbaum, Johannes Henrich and Gebhardt, Andreas}, title = {Machbarkeitsstudie zur Verarbeitung von nicht rostendem Stahl 1.4404 unter Verwendung einer Diodenlaser-basierten LPBF-Maschine mit kartesischem Achssystem}, series = {RTejournal - Forum f{\"u}r Rapid Technologie}, volume = {15}, journal = {RTejournal - Forum f{\"u}r Rapid Technologie}, issn = {1614-0923}, year = {2018}, language = {de} } @inproceedings{SchmidtKaschEichleretal.2021, author = {Schmidt, Thomas and Kasch, Susanne and Eichler, Fabian and Thurn, Laura}, title = {Process strategies on laser-based melting of glass powder}, series = {LiM 2021 proceedings}, booktitle = {LiM 2021 proceedings}, pages = {10 Seiten}, year = {2021}, abstract = {This paper presents the laser-based powder bed fusion (L-PBF) using various glass powders (borosilicate and quartz glass). Compared to metals, these require adapted process strategies. First, the glass powders were characterized with regard to their material properties and their processability in the powder bed. This was followed by investigations of the melting behavior of the glass powders with different laser wavelengths (10.6 µm, 1070 nm). In particular, the experimental setup of a CO2 laser was adapted for the processing of glass powder. An experimental setup with integrated coaxial temperature measurement/control and an inductively heatable build platform was created. This allowed the L-PBF process to be carried out at the transformation temperature of the glasses. Furthermore, the component's material quality was analyzed on three-dimensional test specimen with regard to porosity, roughness, density and geometrical accuracy in order to evaluate the developed L-PBF parameters and to open up possible applications.}, language = {en} } @article{FateriGebhardtThuemmleretal.2014, author = {Fateri, Miranda and Gebhardt, Andreas and Th{\"u}mmler, Stefan and Thurn, Laura}, title = {Experimental investigation on selective laser melting of glass}, series = {Physics procedia : 8th International Conference on Laser Assisted Net Shape Engineering LANE 2014}, volume = {56 (2014)}, journal = {Physics procedia : 8th International Conference on Laser Assisted Net Shape Engineering LANE 2014}, publisher = {Elsevier}, address = {Amsterdam}, issn = {1875-3892 (E-Journal); 1875-3884 (Print)}, doi = {10.1016/j.phpro.2014.08.118}, pages = {357 -- 364}, year = {2014}, language = {en} } @book{EngelnMuellgesZimmermann1992, author = {Engeln-M{\"u}llges, Gisela and Zimmermann, Hans-J{\"u}rgen}, title = {Methoden und Modelle des Operations Research : f{\"u}r Ingenieure, {\"O}konomen und Informatiker / Hans-J{\"u}rgen Zimmermann. [Hrsg. von Gisela Engeln-M{\"u}llges] - 2., {\"u}berarb. Aufl.}, publisher = {Vieweg}, address = {Braunschweig ; Wiesbaden}, isbn = {3-528-18917-7}, pages = {XVI, 385 S. : graph. Darst. ; 23 cm}, year = {1992}, language = {de} } @article{LuftBremenLuft2023, author = {Luft, Angela and Bremen, Sebastian and Luft, Nils}, title = {A cost/benefit and flexibility evaluation framework for additive technologies in strategic factory planning}, series = {Processes}, volume = {11}, journal = {Processes}, number = {7}, publisher = {MDPI}, address = {Basel}, issn = {2227-9717}, doi = {10.3390/pr11071968}, pages = {Artikel 1968}, year = {2023}, abstract = {There is a growing demand for more flexibility in manufacturing to counter the volatility and unpredictability of the markets and provide more individualization for customers. However, the design and implementation of flexibility within manufacturing systems are costly and only economically viable if applicable to actual demand fluctuations. To this end, companies are considering additive manufacturing (AM) to make production more flexible. This paper develops a conceptual model for the impact quantification of AM on volume and mix flexibility within production systems in the early stages of the factory-planning process. Together with the model, an application guideline is presented to help planners with the flexibility quantification and the factory design process. Following the development of the model and guideline, a case study is presented to indicate the potential impact additive technologies can have on manufacturing flexibility Within the case study, various scenarios with different production system configurations and production programs are analyzed, and the impact of the additive technologies on volume and mix flexibility is calculated. This work will allow factory planners to determine the potential impacts of AM on manufacturing flexibility in an early planning stage and design their production systems accordingly.}, language = {en} } @book{EngelnMuellges2004, author = {Engeln-M{\"u}llges, Gisela}, title = {Numerische Mathematik und Statistik : NUMAS ; multimediales Lehr- und Lernsystem zur Numerischen Mathematik und Statistik ; Abschlussbericht ; Gemeinschaftsprojekt}, publisher = {Projektb{\"u}ro NUMAS, FH [u.a.]}, address = {Aachen}, year = {2004}, language = {de} } @inproceedings{AbbasThurnKessleretal.2019, author = {Abbas, Karim and Thurn, Laura and Kessler, Julia and Eichler, Fabian}, title = {Basic research of the consideration of additive manufactured lattice structures under thermoand fluid dynamic loads}, series = {Modern technologies in manufacturing (MTeM 2019)}, volume = {299}, booktitle = {Modern technologies in manufacturing (MTeM 2019)}, number = {Article 01009}, doi = {10.1051/matecconf/201929901009}, pages = {8 Seiten}, year = {2019}, language = {en} } @inproceedings{ThurnGebhardt2017, author = {Thurn, Laura and Gebhardt, Andreas}, title = {Arousing Enthusiasm for STEM: Teaching 3D Printing Technology}, series = {Conference Proceedings: New Perspectives in Science Education}, booktitle = {Conference Proceedings: New Perspectives in Science Education}, publisher = {liberiauniversitaria.it}, address = {Padua}, isbn = {978-88-6292-847-2}, pages = {87 -- 92}, year = {2017}, language = {en} } @inproceedings{FerreinKallweitScholletal.2015, author = {Ferrein, Alexander and Kallweit, Stephan and Scholl, Ingrid and Reichert, Walter}, title = {Learning to Program Mobile Robots in the ROS Summer School Series}, series = {Proceedings 6th International Conference on Robotics in Education (RiE 15)}, booktitle = {Proceedings 6th International Conference on Robotics in Education (RiE 15)}, pages = {6 S.}, year = {2015}, abstract = {The main objective of our ROS Summer School series is to introduce MA level students to program mobile robots with the Robot Operating System (ROS). ROS is a robot middleware that is used my many research institutions world-wide. Therefore, many state-of-the-art algorithms of mobile robotics are available in ROS and can be deployed very easily. As a basic robot platform we deploy a 1/10 RC cart that is wquipped with an Arduino micro-controller to control the servo motors, and an embedded PC that runs ROS. In two weeks, participants get to learn the basics of mobile robotics hands-on. We describe our teaching concepts and our curriculum and report on the learning success of our students.}, language = {en} } @inproceedings{BagheriSchleupenDahmannetal.2016, author = {Bagheri, Mohsen and Schleupen, Josef and Dahmann, Peter and Kallweit, Stephan}, title = {Kletternde Wartungsplattform f{\"u}r die wetterunabh{\"a}ngige Instandhaltung von Rotorbl{\"a}ttern an Windenergieanlagen - SMART}, series = {AKIDA 2016 Aachener Kolloquium f{\"u}r Instandhaltung, Diagnose und Anlagen{\"u}berwachung (AKIDA) am 15. und 16.11.2016, Technologiezentrum Aachen}, booktitle = {AKIDA 2016 Aachener Kolloquium f{\"u}r Instandhaltung, Diagnose und Anlagen{\"u}berwachung (AKIDA) am 15. und 16.11.2016, Technologiezentrum Aachen}, pages = {21 Folien}, year = {2016}, abstract = {In Deutschland liegt der Anteil der Windkraft an der Gesamtstromerzeugung bei 13,3\% mit mehr als 25.000 installierten Windenergieanlagen (WEA). Weltweit erf{\"a}hrt die Windbranche ein rasantes Wachstum. Indien und China berichten eine j{\"a}hrliche Wachstumsrate an Neuinstallationen von 45\%. Die Technologie zur Erzeugung elektrischer Energie aus Windkraft ist noch vergleichsweise jung. Durch die weltweit steigende Anzahl an Windenergieanlagen w{\"a}chst zunehmend der Bedarf an innovativen Wartungsl{\"o}sungen. Komponenten wie Generator oder Getriebe sind inzwischen weitestgehend ausgereift. Der Fokus richtet sich zunehmend auf die wesentliche Kernkomponente - die Rotorbl{\"a}tter. Industriekletterer inspizieren die Rotorbl{\"a}tter oder T{\"u}rme i.d.R. in einem zwei Jahres Rhythmus. Sie werden zunehmend durch Seilarbeitsb{\"u}hnen unterst{\"u}tzt. F{\"u}r gr{\"o}ßere Reparaturen kommen Kr{\"a}ne zum Einsatz, mit denen das Rotorblatt f{\"u}r die Instandhaltung demontiert wird. Die Standardinspektion besteht aus Sicht- und Klopfpr{\"u}fung der Rotorblattoberfl{\"a}che und ist nur bei sehr ruhiger Wetterlage durchf{\"u}hrbar. Seit September 2014 wird das Forschungsprojekt SMART (Scanning, Monitoring, Analysis, Repair and Transportation), Entwicklung einer Wartungsplattform f{\"u}r WEA, vom BMWi gef{\"o}rdert. Das Konsortium besteht aus zwei Firmen und der Fachhochschule Aachen. Die SMART-Anlage klettert reibschl{\"u}ssig am Turm der WEA mittels speziellen Kettenfahrwerken (Abbildung) auf- und abw{\"a}rts. Ein ringf{\"o}rmiges Spannsystems, basierend auf dem Konzept der „N{\"u}rnberger"-Schere, erzeugt die erforderliche Anpresskraft f{\"u}r den Kletterprozess. Wettergesch{\"u}tzte Arbeitskabinen erm{\"o}glichen die ganzj{\"a}hrige Instandhaltung von Rotorbl{\"a}ttern und ebenso T{\"u}rmen. Dadurch k{\"o}nnen Wartungsarbeiten auf 24 Stunden am Tag ausgeweitet werden. Der kombinierte Einsatz (Sensorfusion) bildgebender Messtechnik wie Thermografie, Ultraschall, und Terahertz in der Arbeitskabine kann die Dokumentation, Effizienz und Qualit{\"a}t der Instandhaltungsarbeiten erheblich verbessern. Langfristiges Ziel von SMART ist ein Condition Monitoring f{\"u}r Rotorbl{\"a}tter und T{\"u}rme auf Basis digitalisierter dreidimensionaler Volumenscans. Der kooperative Einsatz mit UAVs erweitert die Instandhaltungsstrategie. UAVs erm{\"o}glichen die schnelle, kosteng{\"u}nstige globale optische Inspektion von Rotorblattoberfl{\"a}chen zur Detektion potentieller Fehlstellen. Der „Proof-of-Concept" Meilenstein wurde mit der Demonstration eines funktionsf{\"a}higen Modells im Dezember 2015 erfolgreich abgeschlossen.}, language = {de} } @inproceedings{AlhwarinFerreinGebhardtetal.2015, author = {Alhwarin, Faraj and Ferrein, Alexander and Gebhardt, Andreas and Kallweit, Stephan and Scholl, Ingrid and Tedjasukmana, Osmond Sanjaya}, title = {Improving additive manufacturing by image processing and robotic milling}, series = {2015 IEEE International Conference on Automation Science and Engineering (CASE), Aug 24-28, 2015 Gothenburg, Sweden}, booktitle = {2015 IEEE International Conference on Automation Science and Engineering (CASE), Aug 24-28, 2015 Gothenburg, Sweden}, doi = {10.1109/CoASE.2015.7294217}, pages = {924 -- 929}, year = {2015}, language = {en} } @book{EngelnMuellgesNiederdrenkWodicka2005, author = {Engeln-M{\"u}llges, Gisela and Niederdrenk, Klaus and Wodicka, Reinhard}, title = {Numerik-Algorithmen : Verfahren, Beispiele, Anwendungen. - 9., vollst. {\"u}berarb. und erw. Aufl.}, publisher = {Springer}, address = {Berlin [u.a.]}, isbn = {3-540-62669-7}, pages = {XXI, 677 S. : zahlr. graph. Darst. + 2 CD-ROMs}, year = {2005}, language = {de} } @article{HaagZontarSchleupenetal.2014, author = {Haag, S. and Zontar, D. and Schleupen, Josef and M{\"u}ller, T. and Brecher, C.}, title = {Chain of refined perception in self-optimizing assembly of micro-optical systems}, series = {Journal of sensors and sensor systems}, volume = {3}, journal = {Journal of sensors and sensor systems}, number = {1}, publisher = {Copernicus Publ.}, address = {G{\"o}ttingen}, issn = {2194-878X}, doi = {10.5194/jsss-3-87-2014}, pages = {87 -- 95}, year = {2014}, abstract = {Today, the assembly of laser systems requires a large share of manual operations due to its complexity regarding the optimal alignment of optics. Although the feasibility of automated alignment of laser optics has been shown in research labs, the development effort for the automation of assembly does not meet economic requirements - especially for low-volume laser production. This paper presents a model-based and sensor-integrated assembly execution approach for flexible assembly cells consisting of a macro-positioner covering a large workspace and a compact micromanipulator with camera attached to the positioner. In order to make full use of available models from computer-aided design (CAD) and optical simulation, sensor systems at different levels of accuracy are used for matching perceived information with model data. This approach is named "chain of refined perception", and it allows for automated planning of complex assembly tasks along all major phases of assembly such as collision-free path planning, part feeding, and active and passive alignment. The focus of the paper is put on the in-process image-based metrology and information extraction used for identifying and calibrating local coordinate systems as well as the exploitation of that information for a part feeding process for micro-optics. Results will be presented regarding the processes of automated calibration of the robot camera as well as the local coordinate systems of part feeding area and robot base.}, language = {en} } @article{RieperGebhardtStucker2016, author = {Rieper, Harald and Gebhardt, Andreas and Stucker, Brent}, title = {Selective Laser Melting of the Eutectic Silver-Copper Alloy Ag 28 wt \% Cu}, series = {RTejournal - Forum f{\"u}r Rapid Technologie}, volume = {13}, journal = {RTejournal - Forum f{\"u}r Rapid Technologie}, issn = {1614-0923}, url = {http://nbn-resolving.de/nbn:de:0009-2-44141}, year = {2016}, abstract = {The aim of this work was to perform a detailed investigation of the use of Selective Laser Melting (SLM) technology to process eutectic silver-copper alloy Ag 28 wt. \% Cu (also called AgCu28). The processing occurred with a Realizer SLM 50 desktop machine. The powder analysis (SEM-topography, EDX, particle distribution) was reported as well as the absorption rates for the near-infrared (NIR) spectrum. Microscope imaging showed the surface topography of the manufactured parts. Furthermore, microsections were conducted for the analysis of porosity. The Design of Experiments approach used the response surface method in order to model the statistical relationship between laser power, spot distance and pulse time.}, language = {en} } @book{Gebhardt2016, author = {Gebhardt, Andreas}, title = {Additive Fertigungsverfahren : Additive Manufacturing und 3D-Drucken f{\"u}r Prototyping - Tooling - Produktion}, edition = {5. aktualisierte und erweiterte Auflage}, publisher = {Hanser}, address = {M{\"u}nchen}, isbn = {978-3-446-44401-0 ; 978-3-446-44539-0}, doi = {10.3139/9783446445390}, pages = {XXIV, 711 S. : zahlr. Ill. u. graph. Darst.}, year = {2016}, language = {de} } @inproceedings{KesslerBalcGebhardt2016, author = {Kessler, Julia and Balc, Nicolae and Gebhardt, Andreas}, title = {Basic research on lattice structures focused on the strut shape and welding beads}, series = {Physics Procedia}, volume = {Vol. 83}, booktitle = {Physics Procedia}, issn = {1875-3884}, doi = {10.1016/j.phpro.2016.08.086}, pages = {833 -- 838}, year = {2016}, language = {en} } @book{Feuerriegel2016, author = {Feuerriegel, Uwe}, title = {Verfahrenstechnik mit EXCEL: Verfahrenstechnische Berechnungen effektiv durchf{\"u}hren und professionell dokumentieren}, publisher = {Springer Fachmedien}, address = {Wiesbaden}, isbn = {978-3-658-02902-9}, doi = {10.1007/978-3-658-02903-6}, pages = {XVII, 381 Seiten}, year = {2016}, language = {de} } @article{MichauxMatternKallweit2018, author = {Michaux, F. and Mattern, P. and Kallweit, Stephan}, title = {RoboPIV: how robotics enable PIV on a large industrial scale}, series = {Measurement Science and Technology}, volume = {29}, journal = {Measurement Science and Technology}, number = {7}, publisher = {IOP}, address = {Bristol}, issn = {1361-6501}, doi = {10.1088/1361-6501/aab5c1}, pages = {074009}, year = {2018}, abstract = {This work demonstrates how the interaction between particle image velocimetry (PIV) and robotics can massively increase measurement efficiency. The interdisciplinary approach is shown using the complex example of an automated, large scale, industrial environment: a typical automotive wind tunnel application. Both the high degree of flexibility in choosing the measurement region and the complete automation of stereo PIV measurements are presented. The setup consists of a combination of three robots, individually used as a 6D traversing unit for the laser illumination system as well as for each of the two cameras. Synchronised movements in the same reference frame are realised through a master-slave setup with a single interface to the user. By integrating the interface into the standard wind tunnel management system, a single measurement plane or a predefined sequence of several planes can be requested through a single trigger event, providing the resulting vector fields within minutes. In this paper, a brief overview on the demands of large scale industrial PIV and the existing solutions is given. Afterwards, the concept of RoboPIV is introduced as a new approach. In a first step, the usability of a selection of commercially available robot arms is analysed. The challenges of pose uncertainty and importance of absolute accuracy are demonstrated through comparative measurements, explaining the individual pros and cons of the analysed systems. Subsequently, the advantage of integrating RoboPIV directly into the existing wind tunnel management system is shown on basis of a typical measurement sequence. In a final step, a practical measurement procedure, including post-processing, is given by using real data and results. Ultimately, the benefits of high automation are demonstrated, leading to a drastic reduction in necessary measurement time compared to non-automated systems, thus massively increasing the efficiency of PIV measurements.}, language = {en} } @article{KunkelGebhardtMpofuetal.2018, author = {Kunkel, Maximilian Hugo and Gebhardt, Andreas and Mpofu, Khumbaulani and Kallweit, Stephan}, title = {Statistical assessment of mechanical properties of selective laser melted specimens of stainless steel}, series = {The International Journal of Advanced Manufacturing Technology}, volume = {98}, journal = {The International Journal of Advanced Manufacturing Technology}, number = {5-8}, publisher = {Springer}, address = {London}, issn = {0268-3768}, doi = {10.1007/s00170-018-2040-8}, pages = {1409 -- 1431}, year = {2018}, abstract = {The rail business is challenged by long product life cycles and a broad spectrum of assembly groups and single parts. When spare part obsolescence occurs, quick solutions are needed. A reproduction of obsolete parts is often connected to long waiting times and minimum lot quantities that need to be purchased and stored. Spare part storage is therefore challenged by growing stocks, bound capital and issues of part ageing. A possible solution could be a virtual storage of spare parts which will be 3D printed through additive manufacturing technologies in case of sudden demand. As mechanical properties of additive manufactured parts are neither guaranteed by machine manufacturers nor by service providers, the utilization of this relatively young technology is impeded and research is required to address these issues. This paper presents an examination of mechanical properties of specimens manufactured from stainless steel through the selective laser melting (SLM) process. The specimens were produced in multiple batches. This paper interrogates the question if the test results follow a normal distribution pattern and if mechanical property predictions can be made. The results will be put opposite existing threshold values provided as the industrial standard. Furthermore, probability predictions will be made in order to examine the potential of the SLM process to maintain state-of-the-art mechanical property requirements.}, language = {en} } @inproceedings{RieperGebhardtStucker2016, author = {Rieper, Harald and Gebhardt, Andreas and Stucker, Brent}, title = {Process parameters for Selective Laser Melting of AgCu7}, series = {DDMC, Fraunhofer Direct Digital Manufacturing Conference, 3}, booktitle = {DDMC, Fraunhofer Direct Digital Manufacturing Conference, 3}, publisher = {Fraunhofer-Verlag}, address = {Stuttgart}, isbn = {978-3-8396-1001-5}, pages = {171 -- 176}, year = {2016}, language = {en} } @article{Thomas2019, author = {Thomas, Axel}, title = {Die Wiederbelebung der Mitarbeiterwohnungsidee bei kommunalen Unternehmen}, series = {VM Verwaltung und Management}, volume = {25}, journal = {VM Verwaltung und Management}, number = {6}, publisher = {Nomos-Verl.-Ges.}, address = {Baden-Baden}, issn = {0947-9856}, doi = {10.5771/0947-9856-2019-6-286}, pages = {286 -- 291}, year = {2019}, language = {de} } @article{WilbringEnning2019, author = {Wilbring, Daniela and Enning, Manfred}, title = {Stromversorgung auf G{\"u}terwagen - Aktuelle Bem{\"u}hungen zur Standardisierung}, series = {ETR - Eisenbahntechnische Rundschau}, volume = {68}, journal = {ETR - Eisenbahntechnische Rundschau}, number = {11}, publisher = {DVV Media Group}, address = {Hamburg}, issn = {0013-2845}, pages = {64 -- 67}, year = {2019}, language = {de} } @book{GebhardtKesslerSchwarz2019, author = {Gebhardt, Andreas and Kessler, Julia and Schwarz, Alexander}, title = {Produktgestaltung f{\"u}r die additive Fertigung}, publisher = {Hanser}, address = {M{\"u}nchen}, isbn = {978-3-446-45285-5}, pages = {XVI, 266 Seiten : Illustrationen, Diagramme}, year = {2019}, language = {de} } @inproceedings{GerhardsSchleserOttenetal.2019, author = {Gerhards, Benjamin and Schleser, Markus and Otten,, Christian and Schwarz, Alexander and Gebhardt, Andreas}, title = {Innovative Laser Beam Joining Technology for Additive Manufactured Parts}, series = {Conference Proceedings 72nd IIW Annual Assembly and International Conference, 7-12 July 2019, Bratislava}, booktitle = {Conference Proceedings 72nd IIW Annual Assembly and International Conference, 7-12 July 2019, Bratislava}, pages = {1 -- 8}, year = {2019}, language = {en} } @inproceedings{GerhardsSchleserOtten2019, author = {Gerhards, Benjamin and Schleser, Markus and Otten, Christian}, title = {Advancements of mobile vacuum laser welding for industrial thick sheet applications}, series = {Conference Proceedings 72nd IIW Annual Assembly and International Conference, 7-12 July 2019, Bratislava}, booktitle = {Conference Proceedings 72nd IIW Annual Assembly and International Conference, 7-12 July 2019, Bratislava}, pages = {1 -- 8}, year = {2019}, language = {en} } @article{WollbrinkMasloZimmeretal.2020, author = {Wollbrink, Moritz and Maslo, Semir and Zimmer, Daniel and Abbas, Karim and Arntz, Kristian and Bergs, Thomas}, title = {Clamping and substrate plate system for continuous additive build-up and post-processing of metal parts}, series = {Procedia CIRP}, volume = {93}, journal = {Procedia CIRP}, publisher = {Elsevier}, address = {Amsterdam}, issn = {2212-8271}, doi = {10.1016/j.procir.2020.04.015}, pages = {108 -- 113}, year = {2020}, abstract = {The manufacturing share of laser powder bed fusion (L-PBF) increases in industrial application, but still many process steps are manually operated. Additionally, it is not possible to achieve tight dimensional tolerances or low surfaces roughness. Hence, a process chain has to be set up to combine additive manufacturing (AM) with further machining technologies. To achieve a continuous workpiece flow as basis for further industrialization of L-PBF, the paper presents a novel substrate system and its application on L-PBF machines and post-processing. The substrate system consists of a zero-point clamping system and a matrix-like interface of contact pins to be substantially connected to the workpiece within the L-PBF process.}, language = {en} } @incollection{FateriGebhardt2020, author = {Fateri, Miranda and Gebhardt, Andreas}, title = {Introduction to Additive Manufacturing}, series = {3D Printing of Optical Components}, booktitle = {3D Printing of Optical Components}, publisher = {Springer}, address = {Cham}, isbn = {978-3-030-58960-8}, doi = {10.1007/978-3-030-58960-8_1}, pages = {1 -- 22}, year = {2020}, abstract = {Additive manufacturing (AM) works by creating objects layer by layer in a manner similar to a 2D printer with the "printed" layers stacked on top of each other. The layer-wise manufacturing nature of AM enables fabrication of freeform geometries which cannot be fabricated using conventional manufacturing methods as a one part. Depending on how each layer is created and bonded to the adjacent layers, different AM methods have been developed. In this chapter, the basic terms, common materials, and different methods of AM are described, and their potential applications are discussed.}, language = {en} } @incollection{GebhardtHoetter2019, author = {Gebhardt, Andreas and Hoetter, Jan-Steffen}, title = {Rapid Tooling}, series = {CIRP Encyclopedia of Production Engineering}, booktitle = {CIRP Encyclopedia of Production Engineering}, publisher = {Springer}, address = {Berlin, Heidelberg}, isbn = {978-3-662-53120-4}, doi = {10.1007/978-3-662-53120-4}, pages = {39 -- 52}, year = {2019}, language = {en} } @book{Schmidt2019, author = {Schmidt, Bernd}, title = {Grundlagen der Elektrotechnik und Elektronik f{\"u}r Ingenieure der Schienenfahrzeugtechnik und anderer Fachrichtungen : neu mit neuem SI-System und weiteren Inhalten f{\"u}r Mechantroniker}, edition = {3. vollst{\"a}ndig {\"u}berarbeitete Auflage}, publisher = {B. Schmidt, Fachverlag f{\"u}r Elektro- und Informationstechnik}, address = {Bielefeld}, isbn = {978-3-944131-04-7}, pages = {XXVI, 270 Seiten : Illustrationen, Diagramme}, year = {2019}, language = {de} } @book{Schmidt2016, author = {Schmidt, Bernd}, title = {Grundlagen der Elektrotechnik und Elektronik f{\"u}r Ingenieure der Schienenfahrzeugtechnik und anderer Fachrichtungen}, edition = {1. Aufl.}, publisher = {B. Schmidt, Fachverlag f{\"u}r Elektro- und Informationstechnik}, address = {Bielefeld}, isbn = {978-3-944131-02-3}, pages = {XXIII, 255 Seiten : Illustrationen}, year = {2016}, language = {de} } @book{Schmidt2017, author = {Schmidt, Bernd}, title = {Grundlagen der Elektrotechnik und Elektronik f{\"u}r Ingenieure der Schienenfahrzeugtechnik und anderer Fachrichtungen : mit 12 Tabellen und 221 Abbildungen ; NEU mit Verst{\"a}ndnisaufgaben und L{\"o}sungsbeispielen}, edition = {2. vollst{\"a}ndig {\"u}berarbeitete Auflage}, publisher = {B. Schmidt, Fachverlag f{\"u}r Elektro- und Informationstechnik}, address = {Bielefeld}, isbn = {978-3-944131-03-0}, pages = {XXV, 307 Seiten : Illustrationen, Diagramme}, year = {2017}, language = {de} } @article{ReisgenSchaeferWilmsetal.2017, author = {Reisgen, Uwe and Sch{\"a}fer, Johannes and Wilms, Konrad and Schleser, Markus}, title = {Aufmischungsarmes, dickschichtiges MSG-Auftragschweißen mit entkoppelter Zweidrahttechnik}, series = {Schweißen und Schneiden}, volume = {69}, journal = {Schweißen und Schneiden}, number = {12}, publisher = {DVS Verlag}, address = {D{\"u}sseldorf}, issn = {0036-7184}, pages = {838 -- 843}, year = {2017}, abstract = {F{\"u}r Auftragschweißaufgaben existiert eine Vielzahl an verfahrenstechnischen Prozessvarianten, die je nach Charakteristik und Anwendungsfall ausgew{\"a}hlt werden. Ein Nachteil der vorwiegend verwendeten Metall- Schutzgasschweißprozesse (MSG) f{\"u}r das Auftragschweißen ist durch die direkte Kopplung von Drahtvorschub zu Energieeintrag gegeben. Die vorgestellte Zweidraht-Prozessvariante kann durch die Ausbildung eines {\"u}bertragenen und eines nicht-{\"u}bertragenen Lichtbogens die elektrische Leistung beider Lichtb{\"o}gen variieren und damit einen direkten Einfluss auf die Prozessgr{\"o}ßen Abschmelzleistung und Aufschmelzgrad nehmen. Im Speziellen besteht {\"u}ber die Entkopplung von Drahtvorschub zu Schweißstromst{\"a}rke die M{\"o}glichkeit eines niederenergetischen Betriebs trotz hoher Drahtvorschubgeschwindigkeit. Damit lassen sich Aufschmelzgrade unter 2\% umsetzen und Abschmelzleistungen bis zu 15 kg/h realisieren.}, language = {de} } @inproceedings{KleineKallweitMichauxetal.2016, author = {Kleine, Harald and Kallweit, Stephan and Michaux, Frank and Havermann, Marc and Olivier, Herbert}, title = {PIV Measurement of Shock Wave Diffraction}, series = {18th International Symposium on Applications of Laser Techniques to Fluid Mechanics, 2016, Lissabon}, booktitle = {18th International Symposium on Applications of Laser Techniques to Fluid Mechanics, 2016, Lissabon}, pages = {1 -- 14}, year = {2016}, language = {en} } @inproceedings{SchleupenEngemannBagherietal.2016, author = {Schleupen, Josef and Engemann, Heiko and Bagheri, Mohsen and Kallweit, Stephan}, title = {The potential of SMART climbing robot combined with a weatherproof cabin for rotor blade maintenance}, series = {17th European Conference on Composite Materials - ECCM, Munich, Germany}, booktitle = {17th European Conference on Composite Materials - ECCM, Munich, Germany}, pages = {1 -- 8}, year = {2016}, language = {en} } @inproceedings{EnningFratscher2017, author = {Enning, Manfred and Fratscher, Ren{\´e}}, title = {Funk-Kommunikation f{\"u}r G{\"u}terwagen: Prinzipien und Anwendungsbeispiel}, series = {IRSA International Railway Symposium Aachen}, booktitle = {IRSA International Railway Symposium Aachen}, pages = {1 -- 16}, year = {2017}, language = {de} } @article{Reichert2017, author = {Reichert, Walter}, title = {Berufseinstieg f{\"u}r Wirtschaftsingenieure - Bachelor oder Master?}, series = {Berufsstart}, journal = {Berufsstart}, year = {2017}, language = {de} } @article{KlockeRichertSube2018, author = {Klocke, Martina and Richert, Vera and Sube, Maike}, title = {Vier Jahre „Guter Studienstart im Ingenieurbereich": Entwicklung und Perspektiven des „Nullten Semesters" in Aachen}, series = {Zeitschrift f{\"u}r Beratung und Studium}, volume = {13}, journal = {Zeitschrift f{\"u}r Beratung und Studium}, number = {1}, publisher = {Universit{\"a}tsverlag Webler}, address = {Bielefeld}, issn = {1860-3068}, pages = {17 -- 22}, year = {2018}, abstract = {Bereits 2015 wurde in der Zeitschrift „Qualit{\"a}t in der Wissenschaft" (QiW) {\"u}ber das Kooperationsprojekt „Guter Studienstart im Ingenieurbereich", das Orientierungssemester von RWTH und FH Aachen, berichtet. In diesem Artikel legen wir den Schwerpunkt auf die Entwicklung des Projekts in den Jahren 2015 bis 2018 und geben eine R{\"u}ckschau sowie einen Ausblick auf die Entwicklungsperspektiven nach dem offiziellen Projektende.}, language = {de} } @article{Thomas2018, author = {Thomas, Axel}, title = {Technologiezentren in der Aachener Region - Retrospektiven und Perspektiven}, series = {VM Verwaltung und Management}, volume = {24}, journal = {VM Verwaltung und Management}, number = {3}, publisher = {Nomos}, address = {Baden-Baden}, issn = {0947-9856}, doi = {10.5771/0947-9856-2018-3-147}, pages = {147 -- 156}, year = {2018}, language = {de} } @article{Thomas2018, author = {Thomas, Axel}, title = {Zielerreichungen der Technologie- und Gr{\"u}nderzentren aus Sicht der kommunalen Finanzwirtschaft - dargestellt am Beispiel der Aachener Region}, series = {Der Gemeindehaushalt}, volume = {119}, journal = {Der Gemeindehaushalt}, number = {7}, publisher = {Kohlhammer}, address = {Stuttgart}, issn = {0340-3645}, pages = {149 -- 155}, year = {2018}, language = {de} } @inproceedings{WiesenEngemannLimpertetal.2018, author = {Wiesen, Patrick and Engemann, Heiko and Limpert, Nicolas and Kallweit, Stephan}, title = {Learning by Doing - Mobile Robotics in the FH Aachen ROS Summer School}, series = {European Robotics Forum 2018, TRROS18 Workshop}, booktitle = {European Robotics Forum 2018, TRROS18 Workshop}, pages = {47 -- 58}, year = {2018}, language = {en} } @incollection{KlockeKatz2017, author = {Klocke, Martina and Katz, Christiane}, title = {Heterogenit{\"a}t von MINT-Studierenden als Herausforderung}, series = {Tagungsband zum 3. Symposium zur Hochschullehre in den MINT-F{\"a}chern}, booktitle = {Tagungsband zum 3. Symposium zur Hochschullehre in den MINT-F{\"a}chern}, publisher = {Technische Hochschule N{\"u}rnberg Georg Simon Ohm}, address = {N{\"u}rnberg}, pages = {31 -- 36}, year = {2017}, language = {de} } @incollection{Klocke2018, author = {Klocke, Martina}, title = {Schulter an Schulter - Zusammenarbeit in einem differenzierten Hochschulsystem}, series = {Lehre und Lehrentwicklung an Fachhochschulen - Festschrift f{\"u}r Prof. Dr. med. W. Huhn}, booktitle = {Lehre und Lehrentwicklung an Fachhochschulen - Festschrift f{\"u}r Prof. Dr. med. W. Huhn}, publisher = {Waxmann}, address = {M{\"u}nster}, isbn = {978-3-8309-3782-1}, pages = {75 -- 80}, year = {2018}, language = {de} } @inproceedings{WiesenSchleser2019, author = {Wiesen, Andreas and Schleser, Markus}, title = {Entwicklung einer Qualit{\"a}tssicherung f{\"u}r das Laserstrahlschweißen im Vakuum mittels Bildverarbeitung}, series = {Große Schweißtechnische Tagung}, booktitle = {Große Schweißtechnische Tagung}, publisher = {DVS-Media}, address = {D{\"u}sseldorf}, isbn = {978-3-96144-066-5}, pages = {1 -- 6}, year = {2019}, language = {de} } @inproceedings{OttenGerhardsSchleseretal.2019, author = {Otten, Christian and Gerhards, Benjamin and Schleser, Markus and Schwarz, A. and Gebhardt, Andreas}, title = {Innovative Laserschweißtechnologie f{\"u}r additiv gefertigte Bauteile}, series = {Große Schweißtechnische Tagung}, booktitle = {Große Schweißtechnische Tagung}, publisher = {DVS-Media}, address = {D{\"u}sseldorf}, isbn = {978-3-96144-066-5}, pages = {150 -- 157}, year = {2019}, language = {de} } @incollection{FiedlerHennMelcher2015, author = {Fiedler, Gerda and Henn, Gudrun and Melcher, Karin}, title = {ANPAK - Ein Anpassungskurs f{\"u}r Studienanf{\"a}nger in den Ingenieurwissenschaften}, series = {Qualifizierung von Studierenden im Student-Life-Cycle. Tagungsband zum Mosbacher Tag der Lehre am 23.10.2014 /}, booktitle = {Qualifizierung von Studierenden im Student-Life-Cycle. Tagungsband zum Mosbacher Tag der Lehre am 23.10.2014 /}, editor = {Morschheuser, Petra}, publisher = {Duale Hochschule Baden-W{\"u}rttemberg (DHBW)}, address = {Mosbach}, isbn = {978-3-943656-02-2}, pages = {90 -- 93}, year = {2015}, language = {de} } @article{CosmaKesslerGebhardtetal.2020, author = {Cosma, Cosmin and Kessler, Julia and Gebhardt, Andreas and Campbell, Ian and Balc, Nicolae}, title = {Improving the Mechanical Strength of Dental Applications and Lattice Structures SLM Processed}, series = {Materials}, volume = {13}, journal = {Materials}, number = {4}, publisher = {MDPI}, address = {Basel}, issn = {1996-1944}, doi = {10.3390/ma13040905}, pages = {1 -- 18}, year = {2020}, abstract = {To manufacture custom medical parts or scaffolds with reduced defects and high mechanical characteristics, new research on optimizing the selective laser melting (SLM) parameters are needed. In this work, a biocompatible powder, 316L stainless steel, is characterized to understand the particle size, distribution, shape and flowability. Examination revealed that the 316L particles are smooth, nearly spherical, their mean diameter is 39.09 μm and just 10\% of them hold a diameter less than 21.18 μm. SLM parameters under consideration include laser power up to 200 W, 250-1500 mm/s scanning speed, 80 μm hatch spacing, 35 μm layer thickness and a preheated platform. The effect of these on processability is evaluated. More than 100 samples are SLM-manufactured with different process parameters. The tensile results show that is possible to raise the ultimate tensile strength up to 840 MPa, adapting the SLM parameters for a stable processability, avoiding the technological defects caused by residual stress. Correlating with other recent studies on SLM technology, the tensile strength is 20\% improved. To validate the SLM parameters and conditions established, complex bioengineering applications such as dental bridges and macro-porous grafts are SLM-processed, demonstrating the potential to manufacture medical products with increased mechanical resistance made of 316L.}, language = {en} } @book{Feuerriegel2021, author = {Feuerriegel, Uwe}, title = {W{\"a}rme{\"u}bertragung mit EXCEL und VBA: W{\"a}rmetechnische Berechnungen und Simulationen effektiv durchf{\"u}hren und professionell dokumentieren}, publisher = {Springer Vieweg}, address = {Wiesbaden}, isbn = {978-3-658-35905-8}, doi = {10.1007/978-3-658-35906-5}, pages = {XX, 439 Seiten}, year = {2021}, abstract = {Dieses Lehrbuch vermittelt die Grundlagen der W{\"a}rme{\"u}bertragung sowie den Umgang mit EXCEL-VBA von der Erstellung von Makros bis zu benutzerdefinierten Funktionen. Es legt damit eine Basis f{\"u}r die schnelle und professionelle Durchf{\"u}hrung von Berechnungen und Simulationen. Die angeleitete Erstellung von Berechnungsmodulen mit EXCEL und VBA aus allen wichtigen Bereichen der W{\"a}rme{\"u}bertragung bildet den inhaltlichen Schwerpunkt. Dazu z{\"a}hlen die station{\"a}re W{\"a}rmeleitung und der station{\"a}re W{\"a}rmedurchgang, die instation{\"a}re W{\"a}rmeleitung, der W{\"a}rme{\"u}bergang bei freier und erzwungener Konvektion sowie die W{\"a}rmestrahlung und der W{\"a}rme{\"u}bergang beim Kondensieren und Sieden. Soweit sinnvoll und m{\"o}glich werden die Stoffwertekorrelationen und die Berechnungsvorschriften aus dem VDI-W{\"a}rmeatlas verwendet. F{\"u}r ausgew{\"a}hlte Anwendungen werden zudem komplexere Auslegungen und Simulationen von Prozessen der W{\"a}rme{\"u}bertragung sowie von W{\"a}rme{\"u}bertragern erstellt. Die Zielgruppen: Studierende in Bachelor- und Masterstudieng{\"a}ngen, Praktiker im Engineering}, language = {de} } @article{EngemannCoenenDawaretal.2021, author = {Engemann, Heiko and C{\"o}nen, Patrick and Dawar, Harshal and Du, Shengzhi and Kallweit, Stephan}, title = {A robot-assisted large-scale inspection of wind turbine blades in manufacturing using an autonomous mobile manipulator}, series = {Applied Sciences}, volume = {11}, journal = {Applied Sciences}, number = {19}, publisher = {MDPI}, address = {Basel}, issn = {2076-3417}, doi = {10.3390/app11199271}, pages = {1 -- 22}, year = {2021}, abstract = {Wind energy represents the dominant share of renewable energies. The rotor blades of a wind turbine are typically made from composite material, which withstands high forces during rotation. The huge dimensions of the rotor blades complicate the inspection processes in manufacturing. The automation of inspection processes has a great potential to increase the overall productivity and to create a consistent reliable database for each individual rotor blade. The focus of this paper is set on the process of rotor blade inspection automation by utilizing an autonomous mobile manipulator. The main innovations include a novel path planning strategy for zone-based navigation, which enables an intuitive right-hand or left-hand driving behavior in a shared human-robot workspace. In addition, we introduce a new method for surface orthogonal motion planning in connection with large-scale structures. An overall execution strategy controls the navigation and manipulation processes of the long-running inspection task. The implemented concepts are evaluated in simulation and applied in a real-use case including the tip of a rotor blade form.}, language = {en} } @inproceedings{FiedlerGottschlichMuellerMelcher2021, author = {Fiedler, Gerda and Gottschlich-M{\"u}ller, Birgit and Melcher, Karin}, title = {Online-Pr{\"u}fungen mit STACK Aufgaben}, series = {Tagungsband ASIM Workshop STS/GMMS/EDU 2021}, booktitle = {Tagungsband ASIM Workshop STS/GMMS/EDU 2021}, editor = {Liu-Henke, Xiaobo and Durak, Umut}, publisher = {ARGESIM Verlag}, address = {Wien}, isbn = {978-3-901608-69-8}, doi = {10.11128/arep.45}, pages = {173 -- 178}, year = {2021}, abstract = {Wir stellen hier exemplarisch STACK Aufgaben vor, die frei von der Problematik sind, welche sich durch diverse Kommunikationswege und (webbasierte) Computer Algebra Systeme (CAS) ergibt. Daher sind sie insbesondere f{\"u}r eine Open-Book Online Pr{\"u}fung geeignet, da eine faire Pr{\"u}fungssituation gew{\"a}hrleistet werden kann.}, language = {de} } @article{KosterScheidweilerTieves2016, author = {Koster, Arie and Scheidweiler, Robert and Tieves, Martin}, title = {A flow based pruning scheme for enumerative equitable coloring algorithms}, series = {A flow based pruning scheme for enumerative equitable coloring algorithms}, journal = {A flow based pruning scheme for enumerative equitable coloring algorithms}, doi = {10.48550/arXiv.1607.08754}, pages = {1 -- 30}, year = {2016}, abstract = {An equitable graph coloring is a proper vertex coloring of a graph G where the sizes of the color classes differ by at most one. The equitable chromatic number is the smallest number k such that G admits such equitable k-coloring. We focus on enumerative algorithms for the computation of the equitable coloring number and propose a general scheme to derive pruning rules for them: We show how the extendability of a partial coloring into an equitable coloring can be modeled via network flows. Thus, we obtain pruning rules which can be checked via flow algorithms. Computational experiments show that the search tree of enumerative algorithms can be significantly reduced in size by these rules and, in most instances, such naive approach even yields a faster algorithm. Moreover, the stability, i.e., the number of solved instances within a given time limit, is greatly improved. Since the execution of flow algorithms at each node of a search tree is time consuming, we derive arithmetic pruning rules (generalized Hall-conditions) from the network model. Adding these rules to an enumerative algorithm yields an even larger runtime improvement.}, language = {en} } @article{BeckenbachScheidweiler2016, author = {Beckenbach, Isabel and Scheidweiler, Robert}, title = {Perfect ƒ-Matchings and ƒ-Factors in Hypergraphs - A Combinatorial Approach}, series = {Discrete Mathematics}, volume = {240}, journal = {Discrete Mathematics}, number = {10}, publisher = {Elsevier}, address = {Amsterdam}, issn = {2192-7782}, doi = {10.1016/j.disc.2017.05.005}, pages = {2499 -- 2506}, year = {2016}, abstract = {We prove characterizations of the existence of perfect ƒ-matchings in uniform mengerian and perfect hypergraphs. Moreover, we investigate the ƒ-factor problem in balanced hypergraphs. For uniform balanced hypergraphs we prove two existence theorems with purely combinatorial arguments, whereas for non-uniform balanced hypergraphs we show that the ƒ-factor problem is NP-hard.}, language = {en} } @article{ScheidweilerTriesch2016, author = {Scheidweiler, Robert and Triesch, Eberhard}, title = {A note on the duality between matchings and vertex covers in balanced hypergraphs}, series = {Journal of Combinatorial Optimization}, volume = {32}, journal = {Journal of Combinatorial Optimization}, number = {2}, publisher = {Springer}, address = {Berlin}, issn = {1573-2886}, doi = {10.1007/s10878-015-9887-5}, pages = {639 -- 644}, year = {2016}, abstract = {We present a new Min-Max theorem for an optimization problem closely connected to matchings and vertex covers in balanced hypergraphs. The result generalizes Kőnig's Theorem (Berge and Las Vergnas in Ann N Y Acad Sci 175:32-40, 1970; Fulkerson et al. in Math Progr Study 1:120-132, 1974) and Hall's Theorem (Conforti et al. in Combinatorica 16:325-329, 1996) for balanced hypergraphs.}, language = {en} }