@article{ReisgenSchleserAbdurakhmanovetal.2012, author = {Reisgen, Uwe and Schleser, Markus and Abdurakhmanov, Aydemir and Gumenyuk, Andrey}, title = {Measuring of plasma properties induced by non-vacuum electron beam welding}, series = {Physics of plasma}, volume = {19}, journal = {Physics of plasma}, number = {1}, publisher = {AIP Publishing}, address = {Melville, NY}, issn = {1089-7674 (E-Journal); 1070-664X (Print)}, doi = {10.1063/1.3675874}, pages = {1 -- 7}, year = {2012}, abstract = {Electron beam plasma measurement was realised by means of DIABEAM system invented by ISF RWTH Aachen. The Langmuir probe method is used for measurement. The relative simplicity of the method and the possibility of dispersion of high power on the probe allow its application for the investigation of high-power electron beams. The key element of the method is a rotating thin tungsten wire, which intersects the beam transversely on its axis and collects part of the current by itself. The signals, which are registered in the DIABEAM as a voltage, were taken in the form of amplitude. The conversion of the probe current into the distribution along the beam radius was realised using the Abel's method. A voltage-current characteristic was built for the beam current. The local electron density as well as the electron temperature, the floating potential and the plasma potential were measured and calculated by means of this characteristic.}, language = {en} } @article{EnningJenayehMuelleretal.1998, author = {Enning, Manfred and Jenayeh, I. and M{\"u}ller, C. and Kositza, N.}, title = {Mechatronics in automating shunting processes in marshalling yards / Jenayeh, I. ; M{\"u}ller, C.; Kositza, N. ; Enning, M. ; Rake, H.}, series = {Mechatronics '98 : proceedings of the 6th UK Mechatronics Forum International Conference, Sk{\"o}vde, Sweden, 9-11 September 1998}, journal = {Mechatronics '98 : proceedings of the 6th UK Mechatronics Forum International Conference, Sk{\"o}vde, Sweden, 9-11 September 1998}, publisher = {Pergamon}, address = {Amsterdam}, isbn = {0-08-043339-1}, pages = {xxi, 918 S. : graph. Darst.}, year = {1998}, language = {en} } @article{Starke2002, author = {Starke, G{\"u}nther}, title = {Mechatronik und Robotik in der Fertigung - Entwicklung eines integrierten Fertigungskonzepts zur automatisierten Regenerierung von Umformwerkzeugen}, series = {Advanced driving systems : Tagungsband / ISOM Chemnitz 2002, Chemnitz, Germany, March 21 - 22, 2002. Ed. by Peter Maisser}, journal = {Advanced driving systems : Tagungsband / ISOM Chemnitz 2002, Chemnitz, Germany, March 21 - 22, 2002. Ed. by Peter Maisser}, publisher = {Inst. f{\"u}r Mechatronik}, address = {Chemnitz}, isbn = {3-00-007504-6}, pages = {193 -- 203}, year = {2002}, language = {de} } @article{EnningPischingerRakeetal.2000, author = {Enning, Manfred and Pischinger, S. and Rake, H. and Kr{\"u}ger, M.}, title = {Mehrgr{\"o}ßenregelung beim direkt einspritzenden Pkw-Dieselmotor / Pischinger, S. ; Rake, H. ; Kr{\"u}ger, M. ; Enning, M. ; Fieweger, K. ; Kinoo, B. ; Schloßer, A.}, series = {Dieselmotorentechnik 2000 : aktueller Stand und Entwicklungstendenzen ; mit 17 Tabellen und 106 Literaturstellen / Michael Bargende. Ulf Essers (Hrsg.)}, journal = {Dieselmotorentechnik 2000 : aktueller Stand und Entwicklungstendenzen ; mit 17 Tabellen und 106 Literaturstellen / Michael Bargende. Ulf Essers (Hrsg.)}, publisher = {Expert-Verl.}, address = {Renningen-Malmsheim}, isbn = {3-8169-1829-8}, pages = {198 -- 217}, year = {2000}, language = {de} } @article{ReisgenSchleserJerabeketal.2010, author = {Reisgen, Uwe and Schleser, Markus and Jerabek, Jakub and Chudoba, Rostislav}, title = {Messung der Strahlqualit{\"a}t einer Elektronenstrahlanlage in Umgebungsatmosph{\"a}re}, series = {Materialwissenschaft und Werkstofftechnik}, volume = {41}, journal = {Materialwissenschaft und Werkstofftechnik}, number = {1}, publisher = {Wiley-VCH}, address = {Weinheim}, issn = {1521-4052}, pages = {45 -- 52}, year = {2010}, abstract = {In den letzten Jahrzehnten hat das Elektronenstrahlschweißen, das bereits im gr{\"o}ßeren Maßstab verwendet wird, seine F{\"a}higkeit als qualitatives Werkzeug f{\"u}r die Verbindung verschiedener Materialen nachgewiesen. Das Non Vacuum Electron Beam Welding (NV-EBW) hat zahlreiche Vorteile im Vergleich zum Elektronenstrahlschweißen im Vakuum, da man unter normalem Atmosph{\"a}rendruck arbeiten kann. Im Hinblick auf die reproduzierbare Qualit{\"a}t, insbesondere im Bereich der Massen-Fertigung, ist die Kontrolle der Strahlparameter sowie deren Einfluss auf das Schweißergebnis von großer Bedeutung. Durch eine genaue Kenntnis der Strahlkenngr{\"o}ßen wie des Strahldurchmessers und der Leistungsdichteverteilung kann eine Aussage {\"u}ber die sich ausbildende Schweißnaht sowie die Schweißbaddynamik getroffen werden. Messungen der Strahlkenngr{\"o}ßen im Prozess erlauben insbesondere die Untersuchung von Humping-Effekten. In diesem Beitrag wird der Prozess der Elektronenstrahlvermessung unter atmosph{\"a}rischen Bedingungen beschrieben. Es wird zudem die Abh{\"a}ngigkeit der Elektronenstrahlcharakteristika von den verschiedenen Prozessparametern dargestellt.}, language = {de} } @article{BaatzWiendahl1971, author = {Baatz, Udo and Wiendahl, Hans Peter}, title = {Methoden des Konstruierens - {\"U}bersicht {\"u}ber Ger{\"a}te, Methoden und Hilfsmittel zur Beseitigung des Engpasses Konstruktion, Teil 1}, series = {Grundlagen der Landtechnik}, volume = {21}, journal = {Grundlagen der Landtechnik}, number = {2}, publisher = {VDI-Verlag}, address = {D{\"u}sseldorf}, isbn = {0017-4920}, pages = {35 -- 38}, year = {1971}, abstract = {Der Konstruktionsbereich ist zu einem neuen Schwerpunkt der allgemeinen Rationalisierungsbem{\"u}hungen geworden. Zunehmend f{\"u}hrt man organisatorische Hilfsmittel, technische Hilfsmittel (EDVA) und neue Konstruktionsmethoden in der Konstruktion ein. Der vorliegende Beitrag analysiert zun{\"a}chst die Ursachen dieser Entwicklung und zeigt im weiteren einige heute bereits eingesetzte Hilfsmittel an Hand von Beispielen auf und diskutiert die Anwendungsm{\"o}glichkeiten.}, language = {de} } @article{BaatzWiendahl1971, author = {Baatz, Udo and Wiendahl, Hans Peter}, title = {Methoden des Konstruierens - {\"U}bersicht {\"u}ber Ger{\"a}te, Methoden und Hilfsmittel zur Beseitigung des Engpasses Konstruktion, Teil 2}, series = {Grundlagen der Landtechnik}, volume = {212}, journal = {Grundlagen der Landtechnik}, number = {3}, publisher = {VDI-Verlag}, address = {D{\"u}sseldorf}, isbn = {0017-4920}, pages = {77 -- 80}, year = {1971}, abstract = {Der Konstruktionsbereich ist zu einem neuen Schwerpunkt der allgemeinen Rationalisierungsbem{\"u}hungen geworden. Zunehmend f{\"u}hrt man organisatorische Hilfsmittel, technische Hilfsmittel (EDVA) und neue Konstruktionsmethoden in der Konstruktion ein. Der vorliegende Beitrag analysiert zun{\"a}chst die Ursachen dieser Entwicklung und zeigt im weiteren einige heute bereits eingesetzte Hilfsmittel an Hand von Beispielen auf und diskutiert die Anwendungsm{\"o}glichkeiten.}, language = {de} } @book{EngelnMuellgesZimmermann1992, author = {Engeln-M{\"u}llges, Gisela and Zimmermann, Hans-J{\"u}rgen}, title = {Methoden und Modelle des Operations Research : f{\"u}r Ingenieure, {\"O}konomen und Informatiker / Hans-J{\"u}rgen Zimmermann. [Hrsg. von Gisela Engeln-M{\"u}llges] - 2., {\"u}berarb. Aufl.}, publisher = {Vieweg}, address = {Braunschweig ; Wiesbaden}, isbn = {3-528-18917-7}, pages = {XVI, 385 S. : graph. Darst. ; 23 cm}, year = {1992}, language = {de} } @inproceedings{DannenSchindelePruemmeretal.2022, author = {Dannen, Tammo and Schindele, Benedikt and Pr{\"u}mmer, Marcel and Arntz, Kristian and Bergs, Thomas}, title = {Methodology for the self-optimizing determination of additive manufacturing process eligibility and optimization potentials in toolmaking}, series = {Procedia CIRP}, volume = {107}, booktitle = {Procedia CIRP}, publisher = {Elsevier}, address = {Amsterdam}, issn = {2212-8271}, doi = {10.1016/j.procir.2022.05.188}, pages = {1539 -- 1544}, year = {2022}, abstract = {Additive Manufacturing (AM) of metallic workpieces faces a continuously rising technological relevance and market size. Producing complex or highly strained unique workpieces is a significant field of application, making AM highly relevant for tool components. Its successful economic application requires systematic workpiece based decisions and optimizations. Considering geometric and technological requirements as well as the necessary post-processing makes deciding effortful and requires in-depth knowledge. As design is usually adjusted to established manufacturing, associated technological and strategic potentials are often neglected. To embed AM in a future proof industrial environment, software-based self-learning tools are necessary. Integrated into production planning, they enable companies to unlock the potentials of AM efficiently. This paper presents an appropriate methodology for the analysis of process-specific AM-eligibility and optimization potential, added up by concrete optimization proposals. For an integrated workpiece characterization, proven methods are enlarged by tooling-specific figures. The first stage of the approach specifies the model's initialization. A learning set of tooling components is described using the developed key figure system. Based on this, a set of applicable rules for workpiece-specific result determination is generated through clustering and expert evaluation. Within the following application stage, strategic orientation is quantified and workpieces of interest are described using the developed key figures. Subsequently, the retrieved information is used for automatically generating specific recommendations relying on the generated ruleset of stage one. Finally, actual experiences regarding the recommendations are gathered within stage three. Statistic learning transfers those to the generated ruleset leading to a continuously deepening knowledge base. This process enables a steady improvement in output quality.}, language = {en} } @article{KaemperDoepperClemensetal.1997, author = {K{\"a}mper, Klaus-Peter and D{\"o}pper, J. and Clemens, M. and Ehrfeld, W.}, title = {Micro gear pumps for dosing of viscous fluids. / D{\"o}pper, J. (u.a.)}, series = {Journal of Micromechanics and Microengineering. 7 (1997), H. 3}, journal = {Journal of Micromechanics and Microengineering. 7 (1997), H. 3}, isbn = {0960-1317}, pages = {230 -- 232}, year = {1997}, language = {en} } @article{KaemperLehrAbeletal.1996, author = {K{\"a}mper, Klaus-Peter and Lehr, H. and Abel, S. and D{\"o}pper, J.}, title = {Microactuators as driving units for microrobotic systems. Herstellung von Mikroaktoren mit dem LIGA-Verfahren f{\"u}r Mikroroboter / Lehr, H.; Abel, S.; D{\"o}pper, J.; Ehrfeld, W.; Hagemann, B.; K{\"a}mper, K.-P.; Michel, F.; Schulu, c.; Th{\"u}rigen, C.}, series = {Proceedings of the SPIE - The International Society for Optical Engineering}, journal = {Proceedings of the SPIE - The International Society for Optical Engineering}, isbn = {0277-786X}, pages = {202 -- 210}, year = {1996}, language = {en} } @article{KaemperEhrfeldDoepperetal.1997, author = {K{\"a}mper, Klaus-Peter and Ehrfeld, W. and D{\"o}pper, J. and Hessel, V.}, title = {Microfluidic components for biological and chemical microreactors. K{\"a}mper, K.-P.; Ehrfeld, W.; D{\"o}pper, J.; Hessel, V.; Lehr, H.; L{\"o}we, H.; Richter, T.; Wolf, A.}, series = {Proceedings : an investigation of micro structures, sensors, actuators, machines and robots ; Nagoya, Japan, January 26 - 30, 1997 / IEEE Robotics and Automation Society ...}, journal = {Proceedings : an investigation of micro structures, sensors, actuators, machines and robots ; Nagoya, Japan, January 26 - 30, 1997 / IEEE Robotics and Automation Society ...}, publisher = {IEEE Service Center}, address = {Piscataway, NJ}, isbn = {0-7803-3744-1}, pages = {338 -- 343}, year = {1997}, language = {en} } @inproceedings{BraunChengLaietal.2019, author = {Braun, Sebastian and Cheng, Chi-Tsun and Lai, Chow Yin and Wollert, J{\"o}rg}, title = {Microservice Architecture for Automation - Realization by the example of a model-factory's manufacturing execution system}, series = {Proceedings of the 23rd World Multi-Conference on Systemics, Cybernetics and Informatics: WMSCI 2019}, booktitle = {Proceedings of the 23rd World Multi-Conference on Systemics, Cybernetics and Informatics: WMSCI 2019}, pages = {33 -- 37}, year = {2019}, language = {en} } @article{RamazaniLiMukherjeeetal.2013, author = {Ramazani, Ali and Li, Yang and Mukherjee, Krishnendu and Prahl, Ulrich and Bleck, Wolfgang and Abdurakhmanov, Aydemir and Schleser, Markus and Reisgen, Uwe}, title = {Microstructure evolution simulation in hot rolled DP600 steel during gas metal arc welding}, series = {Computational materials science}, volume = {Vol. 68}, journal = {Computational materials science}, publisher = {Elsevier}, address = {Amsterdam}, issn = {1879-0801 (E-Book); 0927-0256 (Print)}, pages = {107 -- 116}, year = {2013}, language = {en} } @article{KaemperAbrahamEhrfeldetal.1998, author = {K{\"a}mper, Klaus-Peter and Abraham, M. and Ehrfeld, W. and Hessel, V.}, title = {Microsystem technology: Between research and industrial application. Abraham, M.; Ehrfeld, W.; Hessel, V.; K{\"a}mper, K.-P.; Lacher, M.; Picard, A.}, series = {Microelectronic Engineering. 41-42 (1998)}, journal = {Microelectronic Engineering. 41-42 (1998)}, isbn = {0167-9317}, pages = {47 -- 52}, year = {1998}, language = {en} } @incollection{DiltheyBrandenburgSchleser2005, author = {Dilthey, Ulrich and Brandenburg, Annette and Schleser, Markus}, title = {Mikrokleben}, series = {Montage hybrider Mikrosysteme : Handhabungs- und F{\"u}getechniken f{\"u}r die Klein- und Mittelserienfertigung}, booktitle = {Montage hybrider Mikrosysteme : Handhabungs- und F{\"u}getechniken f{\"u}r die Klein- und Mittelserienfertigung}, publisher = {Springer}, address = {Berlin [u.a.]}, isbn = {978-3-540-23706-8}, pages = {161 -- 172}, year = {2005}, language = {de} } @article{Kaemper1996, author = {K{\"a}mper, Klaus-Peter}, title = {Mikromontage zur Fertigung hybrider Mikrosysteme. Nienhaus, M.; Berg, U.; Ehrfeld, W.; K{\"a}mper, K.-P.; Lehr, H.; Michel, F.}, series = {41. Internationales Wissenschaftliches Kolloquium, Wandel im Maschinenbau durch Feinwerktechik und Mikrosystemtechnik, Bd. 1, Ilmenau, DE, 23.-26. Sep, 1996}, journal = {41. Internationales Wissenschaftliches Kolloquium, Wandel im Maschinenbau durch Feinwerktechik und Mikrosystemtechnik, Bd. 1, Ilmenau, DE, 23.-26. Sep, 1996}, pages = {121 -- 126}, year = {1996}, language = {de} } @article{KaemperLacherAbrahametal.1995, author = {K{\"a}mper, Klaus-Peter and Lacher, M. and Abraham, M. and Ehrfeld, W.}, title = {Mikrosysteme f{\"u}r die Luft- und Raumfahrt. Lacher, M.; Abraham, M.; Ehrfeld, W.; Hagemann, B.; K{\"a}mper, K.-P.; Lehr, H.; Picard, A.; Zetterer, T.}, series = {Deutscher Luft- und Raumfahrtkongreß 1995/1 (1995). Bonn, 26. - 29. September 1995 Motto: "Luft- und Raumfahrt - Schl{\"u}sseltechnologien f{\"u}r das 21. Jahrhundert"}, journal = {Deutscher Luft- und Raumfahrtkongreß 1995/1 (1995). Bonn, 26. - 29. September 1995 Motto: "Luft- und Raumfahrt - Schl{\"u}sseltechnologien f{\"u}r das 21. Jahrhundert"}, publisher = {Deutsche Gesellschaft f{\"u}r Luft- und Raumfahrt}, address = {Lilienthal-Oberth}, pages = {415 -- 423}, year = {1995}, language = {de} } @article{Heinrichs1993, author = {Heinrichs, Horst}, title = {Mit Grafik schafft FEM den Durchbruch}, series = {Maschinen, Anlagen, Verfahren (1993)}, journal = {Maschinen, Anlagen, Verfahren (1993)}, isbn = {0343-043X}, pages = {58 -- 59}, year = {1993}, language = {de} } @article{Wollert1999, author = {Wollert, J{\"o}rg}, title = {Mit verwertbarem Aufwand : Portieren von Software auf Windows CE}, series = {Elektrotechnik f{\"u}r die Automatisierung}, journal = {Elektrotechnik f{\"u}r die Automatisierung}, issn = {0013-581X}, pages = {46 -- 47}, year = {1999}, language = {de} }