@article{BucurLazarescuPopetal.2019,
  author    = {Bucur, Alexandru and Lazarescu, Lucian and Pop, Grigore Marian and Achimas, Gheorghe and Gebhardt, Andreas},
  title     = {Tribological performance of biodegradable lubricants under different surface roughness of tools},
  series = {Academic Journal of Manufacturing Engineering},
  volume    = {17},
  journal   = {Academic Journal of Manufacturing Engineering},
  number    = {1},
  issn      = {1583-7904},
  pages     = {172 -- 178},
  year      = {2019},
  language  = {en}
}
@article{GebhardtPlumMatharetal.1996,
  author    = {Gebhardt, Andreas and Plum, H.D. and Mathar, W. and Wolf, M.},
  title     = {TrueForm - erste Anwendung des neuen Sintermaterials mit Vakuumgießen und Investmentgießen},
  pages     = {231 -- 236},
  year      = {1996},
  language  = {de}
}
@article{Wollert2018,
  author    = {Wollert, J{\"o}rg},
  title     = {TSN - Schluss mit dem Feldbuskrieg?},
  series = {Design \& Elektronik},
  journal   = {Design \& Elektronik},
  number    = {3},
  publisher = {WEKA-Fachmedien},
  address   = {M{\"u}nchen},
  issn      = {0933-8667},
  pages     = {26 -- 31},
  year      = {2018},
  language  = {de}
}
@article{EnningKinooKruegeretal.1999,
  author    = {Enning, Manfred and Kinoo, B. and Kr{\"u}ger, M. and Schloßer, A.},
  title     = {Turbodiesel f{\"a}hrt umweltfreundlich ins n{\"a}chste Jahrtausend. Neue Regelungs- und Steuerungsverfahren verbessern Fahrdynamik und Emissionsverhalten / Enning, M. ; Kinoo, B. ; Kr{\"u}ger, M. ; Schloßer, A.},
  series = {RWTH-Themen. 1999 (1999), H. 2},
  journal   = {RWTH-Themen. 1999 (1999), H. 2},
  pages     = {86 -- 91},
  year      = {1999},
  language  = {de}
}
@inproceedings{NakagawaKallweitMichauxetal.2016,
  author    = {Nakagawa, Masaki and Kallweit, Stephan and Michaux, Frank and Hojo, Teppei},
  title     = {Typical Velocity Fields and Vortical Structures around a Formula One Car, based on Experimental Investigations using Particle Image Velocimetry},
  series = {SAE International Journal of Passenger Cars - Mechanical Systems},
  booktitle = {SAE International Journal of Passenger Cars - Mechanical Systems},
  issn      = {1946-4002},
  doi       = {10.4271/2016-01-1611},
  pages     = {18 S.},
  year      = {2016},
  language  = {en}
}
@article{BergSchleserDelidovichetal.2018,
  author    = {Berg, Alexander-Karl and Schleser, Markus and Delidovich, Artem and Houben, Alexander},
  title     = {Ultraschallunterst{\"u}tzter Schmelzklebstoffauftrag},
  series = {adh{\"a}sion KLEBEN \& DICHTEN},
  volume    = {Volume 62},
  journal   = {adh{\"a}sion KLEBEN \& DICHTEN},
  number    = {Issue 12},
  publisher = {Springer},
  doi       = {10.1007/s35145-018-0089-z},
  pages     = {32 -- 37},
  year      = {2018},
  language  = {de}
}
@book{Gebhardt2011,
  author    = {Gebhardt, Andreas},
  title     = {Understanding Additive Manufacturing : Rapid Prototyping - Rapid Tooling - Rapid Manufacturing},
  publisher = {Hanser},
  address   = {M{\"u}nchen},
  isbn      = {978-3-446-42552-1},
  pages     = {VIII, 164 S. : farb. Ill.},
  year      = {2011},
  language  = {en}
}
@article{ReisgenSchleserMokrovetal.2010,
  author    = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Ahmed, Essam},
  title     = {Uni- and bi-axial deformation behavior of laser welded advanced high strength steel sheets},
  series = {Journal of materials processing technology},
  volume    = {210},
  journal   = {Journal of materials processing technology},
  number    = {15},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0924-0136},
  doi       = {http10.1016/j.jmatprotec.2010.08.003},
  pages     = {2188 -- 2196},
  year      = {2010},
  abstract  = {Bead-on-plate butt joints of 2.5 mm hot rolled DP600/DP600 and 1.2 mm cold rolled TRIP700/TRIP700 steel sheets were performed using 6 kW CO2 laser beam welding. The welding speed ranged from 1.5 to 3.0 and from 2.1 to 3.9 m/min in DP/DP and TRIP/TRIP steel weldments respectively. A top surface helium gas was used as a shielding gas at a flow rate of 20 l/min. Metallographic examinations and transverse tensile testing (DIN EN 895: 1995) were carried out to characterize the weldments. The formability of base metals and weldments were investigated by standard Erichsen test (DIN EN ISO 20482). It was found that the uniaxial plastic behavior of both DP600 and TRIP700 base metals was in agreement with Swift and modified Mecking-Kocks models respectively. In a perpendicular tensile test to the weld line, all specimens were fractured at the base metal however the strengths were somewhat higher than those of base metal. There was a significant reduction in formability caused by welding of both DP/DP and TRIP/TRIP steel weldments and the formability has been improved with the increase of the welding speed.},
  language  = {en}
}
@article{StarkeDrews1995,
  author    = {Starke, G{\"u}nther and Drews, P.},
  title     = {Universelles Roboterprogrammiersystem zur Fertigung von Großfahrzeugen},
  series = {Schweißen und Schneiden. 47 (1995), H. 9},
  journal   = {Schweißen und Schneiden. 47 (1995), H. 9},
  isbn      = {0036-7184},
  pages     = {707 -- 713},
  year      = {1995},
  language  = {de}
}
@incollection{Thomas2013,
  author    = {Thomas, Axel},
  title     = {Unternehmertum als Studienfach?!},
  series = {Innovation durch Kooperation : wie der Mittelstand durch Zusammenarbeit mit den Hochschulen seine Wettbewerbsf{\"a}higkeit steigert : Festschrift f{\"u}r Prof. Dr. rer. nat. Johannes Gartzen / Thomas Gartzen, Ute Gartzen (Hrsg.)},
  booktitle = {Innovation durch Kooperation : wie der Mittelstand durch Zusammenarbeit mit den Hochschulen seine Wettbewerbsf{\"a}higkeit steigert : Festschrift f{\"u}r Prof. Dr. rer. nat. Johannes Gartzen / Thomas Gartzen, Ute Gartzen (Hrsg.)},
  publisher = {Apprimus Verlag},
  address   = {Aachen},
  isbn      = {978-3-86359-136-6},
  pages     = {139 -- 144},
  year      = {2013},
  language  = {de}
}
@book{Willms1987,
  author    = {Willms, Herbert},
  title     = {Untersuchung der Wechselwirkung zwischen Str{\"o}mungsfeld und Reaktionsfront beim deflagrativen Abbrand von Kohlenwasserstoff-Luft-Gemischwolken},
  publisher = {VDI-Verl.},
  address   = {D{\"u}sseldorf},
  isbn      = {3-18-142719-5},
  pages     = {VII, 168 S. : Ill., graph. Darst.},
  year      = {1987},
  language  = {de}
}
@techreport{Schleser2011,
  author    = {Schleser, Markus},
  title     = {Untersuchung des konduktiven R{\"u}hrreibschweißens an Stahl- und Aluminiumwerkstoffen. Schlussbericht. F{\"o}rderkennzeichen: AIF 15687 N},
  pages     = {87 S.},
  year      = {2011},
  language  = {de}
}
@article{ReisgenSchleserSchiebahn2013,
  author    = {Reisgen, Uwe and Schleser, Markus and Schiebahn, Alexander},
  title     = {Untersuchung zum Einfluss von Maschineneigenschaften von Schweißzangen zum Widerstandspunktschweißen auf das Schweißergebnis},
  series = {Schweissen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren},
  volume    = {Bd. 65},
  journal   = {Schweissen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren},
  number    = {H. 6},
  publisher = {DVS Verl.},
  address   = {D{\"u}sseldorf},
  issn      = {0036-7184},
  pages     = {309 -- 313},
  year      = {2013},
  language  = {de}
}
@inproceedings{ScheikReisgenSchleseretal.2012,
  author    = {Scheik, Sven and Reisgen, Uwe and Schleser, Markus and Huber, Frederic},
  title     = {Untersuchungen zum dehnungsbasierten Versagen von geklebten, oberfl{\"a}chenveredelten Blechen im Zugscherversuch},
  series = {2. Doktorandenseminar Klebtechnik : Vortr{\"a}ge der gleichnamigen Veranstaltung in Dresden am 5. und 6. September 2011},
  booktitle = {2. Doktorandenseminar Klebtechnik : Vortr{\"a}ge der gleichnamigen Veranstaltung in Dresden am 5. und 6. September 2011},
  publisher = {DVS-Media},
  address   = {D{\"u}sseldorf},
  organization    = {Institut f{\"u}r Schweißtechnik und F{\"u}getechnik Aachen> ; Doktorandenseminar Klebtechnik <2, 2011, Dresden>},
  isbn      = {978-3-87155-599-2},
  pages     = {73 -- 78},
  year      = {2012},
  language  = {de}
}
@inproceedings{ScheikReisgenSchleseretal.2012,
  author    = {Scheik, Sven and Reisgen, Uwe and Schleser, Markus and Huber, Frederic},
  title     = {Untersuchungen zum dehnungsbasierten Versagen von geklebten, oberfl{\"a}chenveredelten Blechen im Zugscherversuch},
  series = {2. Doktorandenseminar Klebtechnik : Vortr{\"a}ge der gleichnamigen Veranstaltung in Dresden am 5. und 6. September 2011. (DVS-Berichte ; 292)},
  booktitle = {2. Doktorandenseminar Klebtechnik : Vortr{\"a}ge der gleichnamigen Veranstaltung in Dresden am 5. und 6. September 2011. (DVS-Berichte ; 292)},
  publisher = {DVS Media},
  address   = {D{\"u}sseldorf},
  organization    = {Doktorandenseminar Klebtechnik <2, 2011, Dresden> ; Institut f{\"u}r Schweißtechnik und F{\"u}getechnik <Aachen>},
  isbn      = {978-3-87155-599-2},
  pages     = {73 -- 78},
  year      = {2012},
  language  = {de}
}
@article{FrohbergAnik1986,
  author    = {Frohberg, Martin G. and Anik, Sabri},
  title     = {Untersuchungen zum L{\"o}sungsverhalten von Sauerstoff in Metallschmelzen},
  series = {Neue H{\"u}tte : metallurgisch-metallkundliche Fachzeitschrift f{\"u}r Forschung und Praxis},
  volume    = {31},
  journal   = {Neue H{\"u}tte : metallurgisch-metallkundliche Fachzeitschrift f{\"u}r Forschung und Praxis},
  number    = {7},
  issn      = {0028-3207},
  pages     = {255 -- 258},
  year      = {1986},
  language  = {de}
}
@article{AnikFrohbergKapoor1982,
  author    = {Anik, Sabri and Frohberg, Martin G. and Kapoor, Madan Lal},
  title     = {Untersuchungen zum thermodynamischen Verhalten des Sauerstoffs in Kupfer-Wismut-Schmelzen bei 1200°C},
  series = {Zeitschrift f{\"u}r Physikalische Chemie},
  volume    = {133},
  journal   = {Zeitschrift f{\"u}r Physikalische Chemie},
  number    = {2},
  issn      = {0942-9352},
  pages     = {167 -- 174},
  year      = {1982},
  language  = {de}
}
@book{Kallweit1994,
  author    = {Kallweit, Stephan},
  title     = {Untersuchungen zur Erstellung wissensbasierter Fehlerdiagnosesysteme f{\"u}r Kreiselpumpen},
  pages     = {271 S. : zahlr. graph. Darst.},
  year      = {1994},
  language  = {de}
}
@inproceedings{UlmerBraunChengetal.2022,
  author    = {Ulmer, Jessica and Braun, Sebastian and Cheng, Chi-Tsun and Dowey, Steve and Wollert, J{\"o}rg},
  title     = {Usage of digital twins for gamification applications in manufacturing},
  series = {Procedia CIRP},
  volume    = {107},
  booktitle = {Procedia CIRP},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {2212-8271},
  doi       = {10.1016/j.procir.2022.05.044},
  pages     = {675 -- 680},
  year      = {2022},
  abstract  = {Gamification applications are on the rise in the manufacturing sector to customize working scenarios, offer user-specific feedback, and provide personalized learning offerings. Commonly, different sensors are integrated into work environments to track workers' actions. Game elements are selected according to the work task and users' preferences. However, implementing gamified workplaces remains challenging as different data sources must be established, evaluated, and connected. Developers often require information from several areas of the companies to offer meaningful gamification strategies for their employees. Moreover, work environments and the associated support systems are usually not flexible enough to adapt to personal needs. Digital twins are one primary possibility to create a uniform data approach that can provide semantic information to gamification applications. Frequently, several digital twins have to interact with each other to provide information about the workplace, the manufacturing process, and the knowledge of the employees. This research aims to create an overview of existing digital twin approaches for digital support systems and presents a concept to use digital twins for gamified support and training systems. The concept is based upon the Reference Architecture Industry 4.0 (RAMI 4.0) and includes information about the whole life cycle of the assets. It is applied to an existing gamified training system and evaluated in the Industry 4.0 model factory by an example of a handle mounting.},
  language  = {en}
}
@article{HaselgruberMautnerThiele2010,
  author    = {Haselgruber, Nikolaus and Mautner, Karin and Thiele, Jan},
  title     = {Usage Space Analysis for Reliability Testing},
  series = {Quality and Reliability Engineering International},
  volume    = {26},
  journal   = {Quality and Reliability Engineering International},
  number    = {8},
  publisher = {Wiley},
  address   = {New York},
  issn      = {1099-1638},
  doi       = {10.1002/qre.1155},
  pages     = {877 -- 885},
  year      = {2010},
  abstract  = {During the development process of a complex technical product, one widely used and important technique is accelerated testing where the applied stress on a component is chosen to exceed the reference stress, i.e. the stress encountered in field operation, in order to reduce the time to failure. For that, the reference stress has to be known. Since a complex technical product may fail regarding numerous failure modes, stress in general is highly dimensional rather than scalar. In addition, customers use their products individually, i.e. field operation should be described by a distribution rather than by one scalar stress value. In this paper, a way to span the customer usage space is shown. It allows the identification of worst case reference stress profiles in significantly reduced dimensions with minimal loss of information. The application example shows that even for a complex product like a combustion engine, stress information can be compressed significantly. With low measurement effort it turned out that only three reference stress cycles were sufficient to cover a broad range of customer stress variety.},
  language  = {en}
}