@book{Gebhardt2007,
  author    = {Gebhardt, Andreas},
  title     = {Generative Fertigungsverfahren - Rapid Prototyping - Rapid Tooling - Rapid Manufacturing, 3. Aufl.},
  edition   = {3},
  publisher = {Hanser},
  address   = {M{\"u}nchen},
  isbn      = {978-3-446-22666-1},
  pages     = {XVI, 499 S. : Ill., graph. Darst.},
  year      = {2007},
  language  = {de}
}
@misc{Gebhardt2005,
  author    = {Gebhardt, Andreas},
  title     = {Fuzzy Regelung},
  year      = {2005},
  abstract  = {{\"U}berblick Fuzzy-Regler, Fuzzy Sets (Scharfe Mengen, Fuzzy Sets, Formen (st{\"u}ckweise linear, gaußf{\"o}rmig, glockenf{\"o}rmig), Eigenschaften (Gleichheit, Teilmenge)), Fuzzy Operatoren (NICHT, UND, ODER) Fuzzyfizierung Inferenzen (Verarbeitungsvorschrift, Ermittlung der aktiven Regeln, Ermittlung der Fuzzy Mengen, {\"U}berlagerung) Defuzzyfizierung (Mean-of-Maximum, Center-of-Gravity, Largest-of-Maximum, Smallest-of-Maximum, Center-of-Singletons) Entwurf, Beispiel, Fuzzy Tools, Internet, Literatur},
  language  = {de}
}
@article{DuesGebhardtKallweitetal.1994,
  author    = {Dues, M. and Gebhardt, Andreas and Kallweit, Stephan and Scheffler, T. and Siekmann, H. and Uchiyama, T.},
  title     = {Flow Visualization in a Cavitating Flow},
  series = {Proceedings of the German-Japanese Symposium on Multi-Phase Flow : Karlsruhe, Germany, August 23 - 25, 1994 / comp. by U. M{\"u}ller ...},
  journal   = {Proceedings of the German-Japanese Symposium on Multi-Phase Flow : Karlsruhe, Germany, August 23 - 25, 1994 / comp. by U. M{\"u}ller ...},
  publisher = {Kernforschungszentrum Karlsruhe},
  address   = {Karlsruhe},
  pages     = {391 -- 402},
  year      = {1994},
  language  = {en}
}
@misc{Gebhardt2005,
  author    = {Gebhardt, Andreas},
  title     = {Fertigungsverfahren I : Urformen ; Skript zur Vorlesung},
  year      = {2005},
  abstract  = {Urformen aus dem fl{\"u}ssigen oder teigigen Zustand Im Mittelpunkt stehen alle Gießverfahren. Großtechnische Bedeutung haben neben den Metallgießverfahren vor allem auch Verfahren zum Urformen von Kunststoffen und in steigendem Maße auch solche zur Herstellung von Keramiken und Kompositwerkstoffen},
  language  = {de}
}
@misc{Gebhardt2005,
  author    = {Gebhardt, Andreas},
  title     = {Fertigungsverfahren I : Umformen ; Skript zur Vorlesung},
  year      = {2005},
  abstract  = {Grundlagen, Druck-Umformen (Walzen, Schmieden, Gesenkschmieden), Zugdruckumformen (Durchziehen, Tiefziehen), Zugumformen, Biegeumformen},
  language  = {de}
}
@inproceedings{GebhardtSchmidt2005,
  author    = {Gebhardt, Andreas and Schmidt, Frank-Michael},
  title     = {Farbige Prototypen als Werkzeug f{\"u}r den Konstrukteur},
  year      = {2005},
  abstract  = {Physische Prototypen, also Anschauungs- und Funktionsmodelle nach den generativen oder Rapid Prototyping (RP) Verfahren haben sich in diesem Zusammenhang vor allem als Hilfsmittel zur effektiven Kommunikation und zur Evaluierung von Produkteigenschaften einen festen Platz in der Produktentstehung erworben. Die positiven Effekte der etablierten RP Verfahren sind unumstritten. Einfachere, schnellere und wirtschaftlichere Maschinen (Prototyper, Fabrikator), vor allem auch f{\"u}r die B{\"u}roumgebung, geben neue Impulse im Sinne der Optimierung der heutigen Verfahren. Eine neue Dimension verspricht die Option „Farbe" der bisher fast ausschließlich monochromen Modelle. Ist Farbe nur „nice to have" oder welchen Effekt haben farbige Modelle als Werkzeug von Konstrukteuren und Produktenwicklern? Welche Perspektiven bietet „Farbe" dar{\"u}ber hinaus?},
  subject      = {Prototyping},
  language  = {de}
}
@article{FateriGebhardtThuemmleretal.2014,
  author    = {Fateri, Miranda and Gebhardt, Andreas and Th{\"u}mmler, Stefan and Thurn, Laura},
  title     = {Experimental investigation on selective laser melting of glass},
  series = {Physics procedia : 8th International Conference on Laser Assisted Net Shape Engineering LANE 2014},
  volume    = {56 (2014)},
  journal   = {Physics procedia : 8th International Conference on Laser Assisted Net Shape Engineering LANE 2014},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1875-3892 (E-Journal); 1875-3884 (Print)},
  doi       = {10.1016/j.phpro.2014.08.118},
  pages     = {357 -- 364},
  year      = {2014},
  language  = {en}
}
@inproceedings{FateriGebhardtKhosravi2013,
  author    = {Fateri, Miranda and Gebhardt, Andreas and Khosravi, Maziar},
  title     = {Experimental investigation of selective laser melting of lunar regolith for in-situ applications},
  series = {ASME 2013 International Mechanical Engineering Congress and Exposition : San Diego, California, USA, November 15-21, 2013. Vol. 2A: Advanced manufacturing},
  booktitle = {ASME 2013 International Mechanical Engineering Congress and Exposition : San Diego, California, USA, November 15-21, 2013. Vol. 2A: Advanced manufacturing},
  publisher = {ASME},
  organization    = {American Society of Mechanical Engineers},
  isbn      = {978-0-7918-5618-5},
  pages     = {V02AT02A008},
  year      = {2013},
  language  = {en}
}
@article{FateriHoetterGebhardt2012,
  author    = {Fateri, Miranda and H{\"o}tter, Jan-Steffen and Gebhardt, Andreas},
  title     = {Experimental and Theoretical Investigation of Buckling Deformation of Fabricated Objects by Selective Laser Melting},
  series = {Physics Procedia},
  volume    = {39},
  journal   = {Physics Procedia},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1875-3892},
  doi       = {10.1016/j.phpro.2012.10.062},
  pages     = {464 -- 470},
  year      = {2012},
  abstract  = {Although Selective Laser Melting (SLM) process is an innovative manufacturing method, there are challenges such as inferior mechanical properties of fabricated objects. Regarding this, buckling deformation which is caused by thermal stress is one of the undesired mechanical properties which must be alleviated. As buckling deformation is more observable in hard to process materials, silver is selected to be studied theoretically and experimentally for this paper. Different scanning strategies are utilized and a Finite Element Method (FEM) is applied to calculate the temperature gradient in order to determine its effect on the buckling deformation of the objects from experiments.},
  language  = {en}
}
@article{Gebhardt2001,
  author    = {Gebhardt, Andreas},
  title     = {Entwicklungstendenzen und neue Systeme im Rapid Prototyping},
  series = {Industrie Management. 17 (2001), H. 3},
  journal   = {Industrie Management. 17 (2001), H. 3},
  isbn      = {1434-1980},
  pages     = {42 -- 46},
  year      = {2001},
  language  = {de}
}
@incollection{Gebhardt2013,
  author    = {Gebhardt, Andreas},
  title     = {Entwicklung der 3D-Drucktechnologie und Potenziale f{\"u}r die Anwendung im Mittelstand},
  series = {Innovation durch Kooperation : wie der Mittelstand durch Zusammenarbeit mit den Hochschulen seine Wettbewerbsf{\"a}higkeit steigert : Festschrift f{\"u}r Prof. Dr. rer. nat. Johannes Gartzen / Thomas Gartzen, Ute Gartzen (Hrsg.)},
  booktitle = {Innovation durch Kooperation : wie der Mittelstand durch Zusammenarbeit mit den Hochschulen seine Wettbewerbsf{\"a}higkeit steigert : Festschrift f{\"u}r Prof. Dr. rer. nat. Johannes Gartzen / Thomas Gartzen, Ute Gartzen (Hrsg.)},
  publisher = {Apprimus Verlag},
  address   = {Aachen},
  isbn      = {978-3-86359-136-6},
  pages     = {55 -- 59},
  year      = {2013},
  language  = {de}
}
@inproceedings{ThurnBalcGebhardtetal.2017,
  author    = {Thurn, Laura and Balc, Nicolae and Gebhardt, Andreas and Kessler, Julia},
  title     = {Education packed in technology to promote innovations: Teaching Additive Manufacturing based on a rolling Lab},
  series = {Modern Technologies in Manufacturing (MTeM 2017 - AMaTUC)},
  booktitle = {Modern Technologies in Manufacturing (MTeM 2017 - AMaTUC)},
  issn      = {2261-236X},
  doi       = {10.1051/matecconf/201713702013},
  pages     = {6 Seiten},
  year      = {2017},
  language  = {en}
}
@misc{Gebhardt2005,
  author    = {Gebhardt, Andreas},
  title     = {Digitale Regelungstechnik},
  year      = {2005},
  abstract  = {Grundlagen (Prinzip, Komponenten, Abtastung, Aliasing) Algorithmus (Implementierung, Pseudo Code, Ermittlung der Faktoren) Beispiel},
  language  = {de}
}
@inproceedings{LuftGebhardtBalc2019,
  author    = {Luft, Angela and Gebhardt, Andreas and Balc, Nicolae},
  title     = {Challenges of additive manufacturing in production systems},
  series = {Modern technologies in manufacturing (MTeM 2019)},
  volume    = {299},
  booktitle = {Modern technologies in manufacturing (MTeM 2019)},
  number    = {Article 01003},
  doi       = {10.1051/matecconf/201929901003},
  pages     = {6 Seiten},
  year      = {2019},
  language  = {en}
}
@article{GebhardtBackeskrameretal.1995,
  author    = {Gebhardt, Andreas and Backes, G. and kramer, T. and Kreutz, E.-W. (u.a.)},
  title     = {Beschichten von Kurbelzapfen mit CO2-Laserstrahlung. Energietechnik},
  series = {Maschinenmarkt. 101 (1995), H. 12},
  journal   = {Maschinenmarkt. 101 (1995), H. 12},
  isbn      = {0341-5775},
  pages     = {42 -- 45},
  year      = {1995},
  language  = {de}
}
@article{KesslerBalcGebhardtetal.2015,
  author    = {Kessler, Julia and Balc, Nicolae and Gebhardt, Andreas and Abbas, Karim},
  title     = {Basic Research on Lattice Structures Focused on the Tensile Strength},
  series = {Applied Mechanics and Materials},
  volume    = {Vol. 808},
  journal   = {Applied Mechanics and Materials},
  publisher = {Trans Tech Publications},
  address   = {B{\"a}ch},
  issn      = {1662-7482},
  doi       = {10.4028/www.scientific.net/AMM.808.193},
  pages     = {193 -- 198},
  year      = {2015},
  language  = {en}
}
@inproceedings{KesslerBalcGebhardt2016,
  author    = {Kessler, Julia and Balc, Nicolae and Gebhardt, Andreas},
  title     = {Basic research on lattice structures focused on the strut shape and welding beads},
  series = {Physics Procedia},
  volume    = {Vol. 83},
  booktitle = {Physics Procedia},
  issn      = {1875-3884},
  doi       = {10.1016/j.phpro.2016.08.086},
  pages     = {833 -- 838},
  year      = {2016},
  language  = {en}
}
@inproceedings{KesslerBalcGebhardtetal.2017,
  author    = {Kessler, Julia and Balc, Nicolae and Gebhardt, Andreas and Abbas, Karim},
  title     = {Basic research on lattice structures focused on the reliance of the cross sectional area and additional coatings},
  series = {The 4th International Conference on Computing and Solutions in Manufacturing Engineering 2016 - CoSME'16},
  booktitle = {The 4th International Conference on Computing and Solutions in Manufacturing Engineering 2016 - CoSME'16},
  edition   = {Vol. 94},
  doi       = {10.1051/matecconf/20179403008},
  pages     = {7 S.},
  year      = {2017},
  language  = {en}
}
@article{GebhardtMathar1994,
  author    = {Gebhardt, Andreas and Mathar, W.},
  title     = {Auftragsabwicklung und branchenspezifische Anforderungen an SFM-Modelle -am Beispiel medizinischer Modelle},
  pages     = {188 -- 191},
  year      = {1994},
  language  = {de}
}
@inproceedings{ThurnGebhardt2017,
  author    = {Thurn, Laura and Gebhardt, Andreas},
  title     = {Arousing Enthusiasm for STEM: Teaching 3D Printing Technology},
  series = {Conference Proceedings: New Perspectives in Science Education},
  booktitle = {Conference Proceedings: New Perspectives in Science Education},
  publisher = {liberiauniversitaria.it},
  address   = {Padua},
  isbn      = {978-88-6292-847-2},
  pages     = {87 -- 92},
  year      = {2017},
  language  = {en}
}