@article{EnningBolligMannetal.2001,
  author    = {Enning, Manfred and Bollig, A. and Mann, S. and Kaierle, S.},
  title     = {Modellgest{\"u}tzte Pr{\"a}diktive Regelung beim Laserstrahlschweißen / Bollig, A. ; Mann, S. ; Enning, M. ; Kaierle, S.},
  series = {Automatisierungstechnische Praxis : atp. 43 (2001), H. 7},
  journal   = {Automatisierungstechnische Praxis : atp. 43 (2001), H. 7},
  isbn      = {0178-2320},
  pages     = {35 -- 39},
  year      = {2001},
  language  = {de}
}
@article{ReisgenSchleserMokrovetal.2012,
  author    = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Zabirov, Alexander and F{\"u}ssel, Uwe and Schnick, Michael and Hertel, Martin and Jaeckel, Sebastian},
  title     = {Modellierung und Visualisierung der MSG-Lichtbogenprozesse},
  series = {Schweissen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren},
  volume    = {64},
  journal   = {Schweissen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren},
  number    = {4},
  publisher = {DVS Verlag},
  address   = {D{\"u}sseldorf},
  issn      = {0036-7184},
  pages     = {166 -- 174},
  year      = {2012},
  language  = {de}
}
@article{ReisgenSchleserMokrovetal.2012,
  author    = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Zabirov, Alexander and F{\"u}ssel, Uwe and Schnick, Michael and Hertel, Martin and Jaeckel, Sebastian},
  title     = {Modelling and visualisation of the GMA process},
  series = {Welding and Cutting},
  volume    = {11},
  journal   = {Welding and Cutting},
  number    = {4},
  publisher = {DVS Verlag},
  address   = {D{\"u}sseldorf},
  issn      = {1612-3433},
  pages     = {242 -- 249},
  year      = {2012},
  language  = {en}
}
@article{KallweitDuesRadke1994,
  author    = {Kallweit, Stephan and Dues, Michael and Radke, Michael},
  title     = {M{\"o}glichkeiten und Grenzen laseroptischer Verfahren zur Untersuchung hydraulischer Str{\"o}mungsmaschinen / Dues, Michael ; Kallweit, Stephan ; Radke, Michael},
  series = {Forschung im Ingenieurwesen. 60 (1994), H. 11-12},
  journal   = {Forschung im Ingenieurwesen. 60 (1994), H. 11-12},
  isbn      = {0015-7899},
  pages     = {332 -- 336},
  year      = {1994},
  language  = {de}
}
@article{Starke1987,
  author    = {Starke, G{\"u}nther},
  title     = {Nahtfuehrungssensor zur adaptiven Steuerung von Handhabungseinrichtungen fuer das Lichtbogenschweissen},
  series = {Schweissen und Schneiden. 39 (1987), H. 4},
  journal   = {Schweissen und Schneiden. 39 (1987), H. 4},
  isbn      = {0036-7184},
  pages     = {191 -- 192},
  year      = {1987},
  language  = {de}
}
@article{Baatz1979,
  author    = {Baatz, Udo},
  title     = {Neue Aspekte der Integrierten Qualit{\"a}tssicherung f{\"u}r Automobil - Zulieferer},
  series = {Jahrbuch f{\"u}r Ingenieure},
  journal   = {Jahrbuch f{\"u}r Ingenieure},
  publisher = {Expert-Verl.},
  address   = {Grafenau, Z{\"u}rich},
  year      = {1979},
  language  = {de}
}
@article{GebhardtGuntermannSauretal.1996,
  author    = {Gebhardt, Andreas and Guntermann, P. and Saur, G. and Gartzen, Johannes},
  title     = {Neue Impulse f{\"u}r den Leichtbau. Ein Konstruktionsprinzip f{\"u}r Verbauplatten mit Laserschweißen am verdeckten Stoß.},
  series = {Laser-Praxis (1996)},
  journal   = {Laser-Praxis (1996)},
  isbn      = {0937-7069},
  pages     = {21 -- 24},
  year      = {1996},
  language  = {de}
}
@article{KaemperPicardBrilletal.2002,
  author    = {K{\"a}mper, Klaus-Peter and Picard, Antoni and Brill, Manfred and Cassel, Detlef (u.a.)},
  title     = {Neue Medien f{\"u}r die praktische MST Ausbildung},
  series = {Rundschau, FH Kaiserslautern,. Ausgabe Ju (2002)},
  journal   = {Rundschau, FH Kaiserslautern,. Ausgabe Ju (2002)},
  pages     = {14 -- 15},
  year      = {2002},
  language  = {de}
}
@article{WilbringEnningPfaffetal.2020,
  author    = {Wilbring, Daniela and Enning, Manfred and Pfaff, Raphael and Schmidt, Bernd},
  title     = {Neue Perspektiven f{\"u}r die Bahn in der Produktions- und Distributionslogistik durch Prozessautomation},
  series = {ETR - Eisenbahntechnische Rundschau},
  volume    = {69},
  journal   = {ETR - Eisenbahntechnische Rundschau},
  number    = {3},
  issn      = {0013-2845},
  pages     = {15 -- 19},
  year      = {2020},
  language  = {de}
}
@article{BaatzKehrmann1981,
  author    = {Baatz, Udo and Kehrmann, H.},
  title     = {Neue Produkte - per Zufall oder mit System?},
  series = {Jahrbuch f{\"u}r F{\"u}hrungskr{\"a}fte},
  journal   = {Jahrbuch f{\"u}r F{\"u}hrungskr{\"a}fte},
  publisher = {Expert-Verl.},
  address   = {Grafenau, Z{\"u}rich},
  year      = {1981},
  language  = {de}
}
@article{Klocke1992,
  author    = {Klocke, Martina},
  title     = {Neue Technologien - eine Herausforderung f{\"u}r Klein- und Mittelbetriebe},
  series = {CIM, Bedeutung f{\"u}r die Weiterbildung in Klein- und Mittelbetrieben : [Bericht {\"u}ber den EUROTECNET-Workshop "CIM - Bedeutung f{\"u}r die Weiterbildung in Klein- und Mittelbetrieben" vom 16. bis 17. Oktober 1991 in Elmshorn (BR Deutschland)] / [Bericht erstattet von Martina Klocke]},
  journal   = {CIM, Bedeutung f{\"u}r die Weiterbildung in Klein- und Mittelbetrieben : [Bericht {\"u}ber den EUROTECNET-Workshop "CIM - Bedeutung f{\"u}r die Weiterbildung in Klein- und Mittelbetrieben" vom 16. bis 17. Oktober 1991 in Elmshorn (BR Deutschland)] / [Bericht erstattet von Martina Klocke]},
  publisher = {EUROTECNET},
  address   = {Br{\"u}ssel},
  pages     = {6 -- 8},
  year      = {1992},
  language  = {de}
}
@article{SchwarzGebhardtSchleseretal.2019,
  author    = {Schwarz, Alexander and Gebhardt, Andreas and Schleser, Markus and Popoola, Patricia},
  title     = {New Welding Joint Geometries Manufactured by Powder Bed Fusion from 316L},
  series = {Materials Performance and Characterization 8},
  journal   = {Materials Performance and Characterization 8},
  number    = {in press},
  issn      = {2379-1365},
  doi       = {10.1520/MPC20180096},
  year      = {2019},
  language  = {en}
}
@article{EnningZambouAbel2004,
  author    = {Enning, Manfred and Zambou, Nathan and Abel, Dirk},
  title     = {Nonlinear spacing control of following vehicles within platoon a controlled lagrangian approach / Zambou, Nathan ; Enning, Manfred ; Abel, Dirk},
  series = {NOLCOS, IFAC Symposium on Nonlinear Control Systems},
  journal   = {NOLCOS, IFAC Symposium on Nonlinear Control Systems},
  pages     = {1211 -- 1216},
  year      = {2004},
  language  = {en}
}
@article{SeilerPichlerPfaffetal.2009,
  author    = {Seiler, Friedrich and Pichler, Alexander and Pfaff, Raphael and Srulijes, Julio},
  title     = {Novel processing tools for automated doppler picture velocimetry (DPV) evaluation},
  series = {Journal of visualization},
  volume    = {Vol. 12},
  journal   = {Journal of visualization},
  number    = {Iss. 4},
  issn      = {1343-8875},
  pages     = {323 -- 337},
  year      = {2009},
  language  = {en}
}
@article{ReisgenSchleserMokrovetal.2011,
  author    = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Ahmed, Essam},
  title     = {Numerical and experimental investigation of tensile behavior of laser beam welded TRIP700 steel},
  series = {ISIJ international},
  volume    = {Vol. 51},
  journal   = {ISIJ international},
  number    = {No. 3},
  publisher = {ISIJ},
  address   = {Tōkyō},
  organization    = {Iron and Steel Institute of Japan (ISIJ)},
  issn      = {1347-5460 (E-Journal); 0915-1559 (Print)},
  pages     = {429 -- 434},
  year      = {2011},
  language  = {en}
}
@article{RaatschenHolznerBorrmannetal.1991,
  author    = {Raatschen, Hans-J{\"u}rgen and Holzner, M. and Borrmann, M. and Pfrang, W.},
  title     = {Numerische Simulation von Umformprozessen mit dem expliziten FE-Programm UFO-3D},
  pages     = {91 -- 105},
  year      = {1991},
  language  = {de}
}
@article{EngemannDuKallweitetal.2020,
  author    = {Engemann, Heiko and Du, Shengzhi and Kallweit, Stephan and C{\"o}nen, Patrick and Dawar, Harshal},
  title     = {OMNIVIL - an autonomous mobile manipulator for flexible production},
  series = {Sensors},
  volume    = {20},
  journal   = {Sensors},
  number    = {24, art. no. 7249},
  publisher = {MDPI},
  address   = {Basel},
  isbn      = {1424-8220},
  doi       = {10.3390/s20247249},
  pages     = {1 -- 30},
  year      = {2020},
  language  = {en}
}
@article{PfaffBurnham2009,
  author    = {Pfaff, Raphael and Burnham, Keith J.},
  title     = {On abstraction and interpretability: a behavioural perspective},
  series = {Systems Science},
  volume    = {Vol. 35},
  journal   = {Systems Science},
  number    = {Iss. 2},
  issn      = {0137-1223},
  pages     = {19 -- 26},
  year      = {2009},
  language  = {en}
}
@article{AhmedReisgenSchleseretal.2010,
  author    = {Ahmed, Essam and Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg},
  title     = {On formability of tailor laser welded blanks of DP/TRIP steel sheets},
  series = {Science and technology of welding and joining},
  volume    = {15},
  journal   = {Science and technology of welding and joining},
  number    = {5},
  publisher = {Maney},
  address   = {Leeds},
  issn      = {1743-2936},
  doi       = {10.1179/136217110X12731414739754},
  pages     = {337 -- 342},
  year      = {2010},
  abstract  = {This paper aims to evaluate the formability of tailor welded blanks of dual phase (DP600)/transformation induced plasticity (TRIP700) steel sheets. In this work, bead on plate butt joints of 2·5 mm DP600 and 1·2 mm TRIP700 steel sheets were performed using CO2 laser beam welding. Microhardness measurements and transverse tensile testing were carried out to characterise the welds. The formability of base metals and welds were investigated by standard Erichsen test. In a perpendicular tensile test to the weld line, all specimens were fractured at the TRIP base metal, and the strengths were somewhat higher than those of base metal. There was a significant reduction in formability caused by welding of the DP600/TRIP700 steel sheets, and the formability increased with increasing welding speed.},
  language  = {en}
}
@article{ReisgenSchleserMokrovetal.2012,
  author    = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Ahmed, Essam},
  title     = {Optimization of laser welding of DP/TRIP steel sheets using statistical approach},
  series = {Optics and laser technology},
  volume    = {44},
  journal   = {Optics and laser technology},
  number    = {1},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1879-2545 (E-Journal); 0030-3992 (Print); 0308-4280 (Print)},
  doi       = {10.1016/j.optlastec.2011.06.028},
  pages     = {255 -- 262},
  year      = {2012},
  abstract  = {Generally, the quality of a weld joint is directly influenced by the welding input parameter settings. Selection of proper process parameters is important to obtain the desired weld bead profile and quality. In this research work, numerical and graphical optimization techniques of the CO2 laser beam welding of dual phase (DP600)/transformation induced plasticity (TRIP700) steel sheets were carried out using response surface methodology (RSM) based on Box-Behnken design. The procedure was established to improve the weld quality, increase the productivity and minimize the total operation cost by considering the welding parameters range of laser power (2-2.2 kW), welding speed (40-50 mm/s) and focus position (-1 to 0 mm). It was found that, RSM can be considered as a powerful tool in experimental welding optimization, even when the experimenter does not have a model for the process. Strong, efficient and low cost weld joints could be achieved using the optimum welding conditions.},
  language  = {en}
}