@article{KaemperSchmittWesneretal.1989,
  author    = {K{\"a}mper, Klaus-Peter and Schmitt, W. and Wesner, D. A. and G{\"u}ntherodt, G.},
  title     = {Thickness dependence of the spin- and angle-resolved photoemission of ultrathin, epitaxial Ni(111)/W(110) layers},
  series = {Applied Physics A: Materials Science and Processing. 49 (1989), H. 6},
  journal   = {Applied Physics A: Materials Science and Processing. 49 (1989), H. 6},
  isbn      = {1432-0630},
  pages     = {573 -- 578},
  year      = {1989},
  language  = {en}
}
@article{KallweitVanlanduitVanherzeeleetal.2007,
  author    = {Kallweit, Stephan and Vanlanduit, S. and Vanherzeele, J. and Brouns, M.},
  title     = {Time resolved PIV reconstruction of periodic flows / Vanlanduit, S. ; Vanherzeele, J. ; Kallweit, S. ; Brouns, M. ; Guillaume, P.},
  series = {PIV'07, 7th International Symposium on Particle Image Velocimetry, Roma, IT, Sep 11-14, 2007},
  journal   = {PIV'07, 7th International Symposium on Particle Image Velocimetry, Roma, IT, Sep 11-14, 2007},
  pages     = {1 -- 14},
  year      = {2007},
  language  = {en}
}
@article{KallweitKaminskyRossietal.2005,
  author    = {Kallweit, Stephan and Kaminsky, R. and Rossi, M. and Morbiducci, U.},
  title     = {Time resolved PIV technique for high temporal resolution measurements of prosthetic heart valves fluid dynamics / Kaminsky, R. ; Rossi, M. ; Morbiducci, U. ; Scalise, L. ; Catellini, P. ; Kallweit, S. ; Verdonck, P. ; Grigioni, M.},
  series = {The International Journal of Artificial Organs. 28 (2005), H. 9},
  journal   = {The International Journal of Artificial Organs. 28 (2005), H. 9},
  isbn      = {1724-6040},
  pages     = {946},
  year      = {2005},
  language  = {en}
}
@article{BucurLazarescuPopetal.2019,
  author    = {Bucur, Alexandru and Lazarescu, Lucian and Pop, Grigore Marian and Achimas, Gheorghe and Gebhardt, Andreas},
  title     = {Tribological performance of biodegradable lubricants under different surface roughness of tools},
  series = {Academic Journal of Manufacturing Engineering},
  volume    = {17},
  journal   = {Academic Journal of Manufacturing Engineering},
  number    = {1},
  issn      = {1583-7904},
  pages     = {172 -- 178},
  year      = {2019},
  language  = {en}
}
@article{GebhardtPlumMatharetal.1996,
  author    = {Gebhardt, Andreas and Plum, H.D. and Mathar, W. and Wolf, M.},
  title     = {TrueForm - erste Anwendung des neuen Sintermaterials mit Vakuumgießen und Investmentgießen},
  pages     = {231 -- 236},
  year      = {1996},
  language  = {de}
}
@article{Wollert2018,
  author    = {Wollert, J{\"o}rg},
  title     = {TSN - Schluss mit dem Feldbuskrieg?},
  series = {Design \& Elektronik},
  journal   = {Design \& Elektronik},
  number    = {3},
  publisher = {WEKA-Fachmedien},
  address   = {M{\"u}nchen},
  issn      = {0933-8667},
  pages     = {26 -- 31},
  year      = {2018},
  language  = {de}
}
@article{EnningKinooKruegeretal.1999,
  author    = {Enning, Manfred and Kinoo, B. and Kr{\"u}ger, M. and Schloßer, A.},
  title     = {Turbodiesel f{\"a}hrt umweltfreundlich ins n{\"a}chste Jahrtausend. Neue Regelungs- und Steuerungsverfahren verbessern Fahrdynamik und Emissionsverhalten / Enning, M. ; Kinoo, B. ; Kr{\"u}ger, M. ; Schloßer, A.},
  series = {RWTH-Themen. 1999 (1999), H. 2},
  journal   = {RWTH-Themen. 1999 (1999), H. 2},
  pages     = {86 -- 91},
  year      = {1999},
  language  = {de}
}
@article{BergSchleserDelidovichetal.2018,
  author    = {Berg, Alexander-Karl and Schleser, Markus and Delidovich, Artem and Houben, Alexander},
  title     = {Ultraschallunterst{\"u}tzter Schmelzklebstoffauftrag},
  series = {adh{\"a}sion KLEBEN \& DICHTEN},
  volume    = {Volume 62},
  journal   = {adh{\"a}sion KLEBEN \& DICHTEN},
  number    = {Issue 12},
  publisher = {Springer},
  doi       = {10.1007/s35145-018-0089-z},
  pages     = {32 -- 37},
  year      = {2018},
  language  = {de}
}
@article{ReisgenSchleserMokrovetal.2010,
  author    = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Ahmed, Essam},
  title     = {Uni- and bi-axial deformation behavior of laser welded advanced high strength steel sheets},
  series = {Journal of materials processing technology},
  volume    = {210},
  journal   = {Journal of materials processing technology},
  number    = {15},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0924-0136},
  doi       = {http10.1016/j.jmatprotec.2010.08.003},
  pages     = {2188 -- 2196},
  year      = {2010},
  abstract  = {Bead-on-plate butt joints of 2.5 mm hot rolled DP600/DP600 and 1.2 mm cold rolled TRIP700/TRIP700 steel sheets were performed using 6 kW CO2 laser beam welding. The welding speed ranged from 1.5 to 3.0 and from 2.1 to 3.9 m/min in DP/DP and TRIP/TRIP steel weldments respectively. A top surface helium gas was used as a shielding gas at a flow rate of 20 l/min. Metallographic examinations and transverse tensile testing (DIN EN 895: 1995) were carried out to characterize the weldments. The formability of base metals and weldments were investigated by standard Erichsen test (DIN EN ISO 20482). It was found that the uniaxial plastic behavior of both DP600 and TRIP700 base metals was in agreement with Swift and modified Mecking-Kocks models respectively. In a perpendicular tensile test to the weld line, all specimens were fractured at the base metal however the strengths were somewhat higher than those of base metal. There was a significant reduction in formability caused by welding of both DP/DP and TRIP/TRIP steel weldments and the formability has been improved with the increase of the welding speed.},
  language  = {en}
}
@article{StarkeDrews1995,
  author    = {Starke, G{\"u}nther and Drews, P.},
  title     = {Universelles Roboterprogrammiersystem zur Fertigung von Großfahrzeugen},
  series = {Schweißen und Schneiden. 47 (1995), H. 9},
  journal   = {Schweißen und Schneiden. 47 (1995), H. 9},
  isbn      = {0036-7184},
  pages     = {707 -- 713},
  year      = {1995},
  language  = {de}
}
@article{ReisgenSchleserSchiebahn2013,
  author    = {Reisgen, Uwe and Schleser, Markus and Schiebahn, Alexander},
  title     = {Untersuchung zum Einfluss von Maschineneigenschaften von Schweißzangen zum Widerstandspunktschweißen auf das Schweißergebnis},
  series = {Schweissen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren},
  volume    = {Bd. 65},
  journal   = {Schweissen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren},
  number    = {H. 6},
  publisher = {DVS Verl.},
  address   = {D{\"u}sseldorf},
  issn      = {0036-7184},
  pages     = {309 -- 313},
  year      = {2013},
  language  = {de}
}
@article{FrohbergAnik1986,
  author    = {Frohberg, Martin G. and Anik, Sabri},
  title     = {Untersuchungen zum L{\"o}sungsverhalten von Sauerstoff in Metallschmelzen},
  series = {Neue H{\"u}tte : metallurgisch-metallkundliche Fachzeitschrift f{\"u}r Forschung und Praxis},
  volume    = {31},
  journal   = {Neue H{\"u}tte : metallurgisch-metallkundliche Fachzeitschrift f{\"u}r Forschung und Praxis},
  number    = {7},
  issn      = {0028-3207},
  pages     = {255 -- 258},
  year      = {1986},
  language  = {de}
}
@article{AnikFrohbergKapoor1982,
  author    = {Anik, Sabri and Frohberg, Martin G. and Kapoor, Madan Lal},
  title     = {Untersuchungen zum thermodynamischen Verhalten des Sauerstoffs in Kupfer-Wismut-Schmelzen bei 1200°C},
  series = {Zeitschrift f{\"u}r Physikalische Chemie},
  volume    = {133},
  journal   = {Zeitschrift f{\"u}r Physikalische Chemie},
  number    = {2},
  issn      = {0942-9352},
  pages     = {167 -- 174},
  year      = {1982},
  language  = {de}
}
@article{HaselgruberMautnerThiele2010,
  author    = {Haselgruber, Nikolaus and Mautner, Karin and Thiele, Jan},
  title     = {Usage Space Analysis for Reliability Testing},
  series = {Quality and Reliability Engineering International},
  volume    = {26},
  journal   = {Quality and Reliability Engineering International},
  number    = {8},
  publisher = {Wiley},
  address   = {New York},
  issn      = {1099-1638},
  doi       = {10.1002/qre.1155},
  pages     = {877 -- 885},
  year      = {2010},
  abstract  = {During the development process of a complex technical product, one widely used and important technique is accelerated testing where the applied stress on a component is chosen to exceed the reference stress, i.e. the stress encountered in field operation, in order to reduce the time to failure. For that, the reference stress has to be known. Since a complex technical product may fail regarding numerous failure modes, stress in general is highly dimensional rather than scalar. In addition, customers use their products individually, i.e. field operation should be described by a distribution rather than by one scalar stress value. In this paper, a way to span the customer usage space is shown. It allows the identification of worst case reference stress profiles in significantly reduced dimensions with minimal loss of information. The application example shows that even for a complex product like a combustion engine, stress information can be compressed significantly. With low measurement effort it turned out that only three reference stress cycles were sufficient to cover a broad range of customer stress variety.},
  language  = {en}
}
@article{Wollert2007,
  author    = {Wollert, J{\"o}rg},
  title     = {UWB, ZigBee und Z-Wave in der Automatisierung : neue Konkurrenzsituation bei Short Range Wireless?},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  volume    = {Bd. 56},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {H. 2},
  issn      = {0013-5658},
  pages     = {62 -- 65},
  year      = {2007},
  language  = {de}
}
@article{Gebhardt2002,
  author    = {Gebhardt, Andreas},
  title     = {Vakuumgiessen innerhalb der Produktentstehung},
  series = {Form und Werkzeug (2002)},
  journal   = {Form und Werkzeug (2002)},
  year      = {2002},
  language  = {de}
}
@article{StarkeKampker1999,
  author    = {Starke, G{\"u}nther and Kampker, M.},
  title     = {Verbesserte Roboterprogrammierung f{\"u}r die werkstattorientierte Fertigung},
  series = {DVS-Berichte. 199 (1999)},
  journal   = {DVS-Berichte. 199 (1999)},
  isbn      = {0418-9639},
  pages     = {84 -- 90},
  year      = {1999},
  language  = {de}
}
@article{Heinrichs1989,
  author    = {Heinrichs, Horst},
  title     = {Verbindung von CAD und CAE mittels der systemneutralen CAD I Schnittstelle},
  pages     = {391 -- 408},
  year      = {1989},
  language  = {de}
}
@article{Grundmann1993,
  author    = {Grundmann, Reinhard},
  title     = {Vergleich von Ger{\"a}uschmessung und -prognose nach VDI 3731},
  series = {HLH - Zeitschrift f{\"u}r Heizung, L{\"u}ftung, Klimatechnik, Haustechnik. 44 (1993), H. 8},
  journal   = {HLH - Zeitschrift f{\"u}r Heizung, L{\"u}ftung, Klimatechnik, Haustechnik. 44 (1993), H. 8},
  isbn      = {0017-9906},
  pages     = {513 -- 516},
  year      = {1993},
  language  = {de}
}
@article{Starke1999,
  author    = {Starke, G{\"u}nther},
  title     = {Verschleißerkennung und -darstellung f{\"u}r das automatisierte Reparaturschweißen},
  series = {Qualit{\"a}tsorientierte Schweißtechnik als Wettbewerbsfaktor, DVS-Berichte. 196 (1999)},
  journal   = {Qualit{\"a}tsorientierte Schweißtechnik als Wettbewerbsfaktor, DVS-Berichte. 196 (1999)},
  isbn      = {0418-9639},
  pages     = {111 -- 127},
  year      = {1999},
  language  = {de}
}