@article{PlessmannWollertFiedler1995,
  author    = {Pleßmann, K. W. and Wollert, J{\"o}rg and Fiedler, J{\"o}rg},
  title     = {Die ganzheitliche und objektorientierte Prozesssteuerung - eine Vision?},
  series = {CIM-Management : Produkte, Strategien, Entscheidungshilfen},
  volume    = {11},
  journal   = {CIM-Management : Produkte, Strategien, Entscheidungshilfen},
  number    = {2},
  issn      = {0179-2679},
  pages     = {56 -- 60},
  year      = {1995},
  language  = {de}
}
@article{PfeifferGauchelLuecke1999,
  author    = {Pfeiffer, Johann and Gauchel, Joachim and L{\"u}cke, Mathias},
  title     = {Genauigkeitsbetrachtungen in der CIM-Prozesskette},
  series = {4th International Scientific Colloquium CAx Techniques : proceedings of the 4th international scientific colloquium, Fachhochschule Bielefeld, Germany, September 13 - 15, 1999 / [organized in co-operation between Fachhochschule Bielefeld and Rzesz{\´o}w University of Technology ]. Ed. by Heinrich Ostholt},
  journal   = {4th International Scientific Colloquium CAx Techniques : proceedings of the 4th international scientific colloquium, Fachhochschule Bielefeld, Germany, September 13 - 15, 1999 / [organized in co-operation between Fachhochschule Bielefeld and Rzesz{\´o}w University of Technology ]. Ed. by Heinrich Ostholt},
  publisher = {[Fachhochsch.]},
  address   = {[Bielefeld]},
  isbn      = {3-00-004379-9},
  pages     = {323 -- 332},
  year      = {1999},
  language  = {de}
}
@article{PfeifferGauchel1997,
  author    = {Pfeiffer, Johann and Gauchel, Joachim},
  title     = {Entwicklung und Simulation von Mechanismen zu Automatisierungszwecken / Joachim Gauchel ; Johann Pfeiffer},
  series = {CAE Techniques : [proceedings of the 3st International Scientific Colloquium, Rzesz{\´o}w University of Technology, Poland, September 24-27, 1997] / ed. by Kazimierz E. Oczoś},
  journal   = {CAE Techniques : [proceedings of the 3st International Scientific Colloquium, Rzesz{\´o}w University of Technology, Poland, September 24-27, 1997] / ed. by Kazimierz E. Oczoś},
  publisher = {Politechnika Rzeszowska},
  address   = {Rzesz{\´o}w},
  isbn      = {83-7199-004-9},
  pages     = {425 ff},
  year      = {1997},
  language  = {de}
}
@article{Pfeiffer2003,
  author    = {Pfeiffer, Johann},
  title     = {Lernfeld 'Prozeßkette der Freiformfl{\"a}chenherstellung' : [Online-Ressource] / ... in Zus.-Arb. mit Johann Pfeiffer},
  series = {NUMAS - Ein Lehr- und Lernsystem zur Numerischen Mathematik und Statistik : [Online-Ressource] / Projektleitung: Gisela Engeln M{\"u}llges},
  journal   = {NUMAS - Ein Lehr- und Lernsystem zur Numerischen Mathematik und Statistik : [Online-Ressource] / Projektleitung: Gisela Engeln M{\"u}llges},
  publisher = {NUMAS.de},
  address   = {Aachen},
  year      = {2003},
  language  = {de}
}
@article{Pfeiffer2002,
  author    = {Pfeiffer, Johann},
  title     = {Gute Chancen im Maschinenbau},
  series = {Aachener Nachrichten / Aachener Zeitung : Sonderbeil. (2002)},
  journal   = {Aachener Nachrichten / Aachener Zeitung : Sonderbeil. (2002)},
  publisher = {-},
  year      = {2002},
  language  = {de}
}
@article{Pfeiffer2002,
  author    = {Pfeiffer, Johann},
  title     = {Gute Chancen im Maschinenbau},
  series = {Rheinische Post : Sonderbeil. (2002)},
  journal   = {Rheinische Post : Sonderbeil. (2002)},
  year      = {2002},
  language  = {de}
}
@article{Pfeiffer2002,
  author    = {Pfeiffer, Johann},
  title     = {Chancen im Maschinenbau},
  series = {Fachblatt : Journal der Fachhochschule Aachen . 2002 (2002), H. 1},
  journal   = {Fachblatt : Journal der Fachhochschule Aachen . 2002 (2002), H. 1},
  publisher = {-},
  pages     = {2},
  year      = {2002},
  language  = {de}
}
@article{Pfeiffer2004,
  author    = {Pfeiffer, Johann},
  title     = {Genauigkeit und Qualit{\"a}t von Freiformfl{\"a}chen / Projektleiter: Joachim Gauchel},
  series = {Forschungsbericht 2004 / Hrsg.: Der Rektor der Fachhochschule Aachen},
  journal   = {Forschungsbericht 2004 / Hrsg.: Der Rektor der Fachhochschule Aachen},
  publisher = {Fachhochsch.},
  address   = {Aachen},
  pages     = {180},
  year      = {2004},
  language  = {de}
}
@article{PfaffSchmidtPinders2015,
  author    = {Pfaff, Raphael and Schmidt, Bernd and Pinders, Udo},
  title     = {Energieeffizienz steigern durch Rekuperationseinrichtungen},
  series = {Deine Bahn},
  journal   = {Deine Bahn},
  number    = {5},
  publisher = {Eisenbahn-Fachverlag},
  address   = {Mainz},
  issn      = {0172-4479},
  pages     = {50 -- 53},
  year      = {2015},
  language  = {de}
}
@article{PfaffSchmidt2016,
  author    = {Pfaff, Raphael and Schmidt, Bernd},
  title     = {Daten in der Cloud - und dann?},
  series = {Deine Bahn},
  journal   = {Deine Bahn},
  number    = {6},
  publisher = {Bahn-Fachverlag},
  address   = {Berlin},
  issn      = {0948-7263},
  pages     = {50 -- 55},
  year      = {2016},
  abstract  = {Schienenverkehrssysteme stehen in zunehmendem Wettbewerb, sowohl untereinander als auch mit anderen Verkehrstr{\"a}gern. Als wichtiger Aspekt zur Steigerung der Kosteneffizienz wird die Digitalisierung des Betriebs und der Fahrzeuge betrachtet. {\"U}ber eine Prognose der Ausfallwahrscheinlichkeit bzw. Restlebensdauer von Subsystemen k{\"o}nnen mittels Digitalisierung die Instandhaltungskosten gesenkt werden. Die geringen Fehlerraten im System Bahn machen die Nutzung besonderer Simulationstechniken notwendig. In diesem Beitrag wird gezeigt, wie sich die Subsystemverf{\"u}gbarkeit aus den beobachteten Fehlerraten der Teilfunktionen vorhersagen l{\"a}sst.},
  language  = {de}
}
@article{PfaffGidaszewskiSchmidt2020,
  author    = {Pfaff, Raphael and Gidaszewski, Lars and Schmidt, Bernd},
  title     = {Ber{\"u}cksichtigung von No Fault Found im Diagnose- und Instandhaltungssystem von Schienenfahrzeugen},
  series = {ETR - Eisenbahntechnische Rundschau},
  journal   = {ETR - Eisenbahntechnische Rundschau},
  number    = {5},
  publisher = {DVV Media Group},
  address   = {Hamburg},
  issn      = {0013-2845},
  pages     = {56 -- 59},
  year      = {2020},
  abstract  = {Intermittierende und nicht reproduzierbare Fehler, auch als No Fault Found bezeichnet, treten in praktisch allen Bereichen auf und sorgen f{\"u}r hohe Kosten. Diese sind h{\"a}ufig auf unpr{\"a}zise Fehlerbeschreibungen zur{\"u}ckzuf{\"u}hren. Im vorliegenden Beitrag werden Anpassungen der Vorgehensweise bei der Entwicklung und Anpassungen des Diagnosesystems vorgeschlagen.},
  language  = {de}
}
@article{PfaffEnningSutter2022,
  author    = {Pfaff, Raphael and Enning, Manfred and Sutter, Stefan},
  title     = {A risk‑based approach to automatic brake tests for rail freight service: incident analysis and realisation concept},
  series = {SN Applied Sciences},
  volume    = {4},
  journal   = {SN Applied Sciences},
  number    = {4},
  publisher = {Springer},
  address   = {Cham},
  issn      = {2523-3971},
  doi       = {10.1007/s42452-022-05007-x},
  pages     = {1 -- 14},
  year      = {2022},
  abstract  = {This study reviews the practice of brake tests in freight railways, which is time consuming and not suitable to detect certain failure types. Public incident reports are analysed to derive a reasonable brake test hardware and communication architecture, which aims to provide automatic brake tests at lower cost than current solutions. The proposed solutions relies exclusively on brake pipe and brake cylinder pressure sensors, a brake release position switch as well as radio communication via standard protocols. The approach is embedded in the Wagon 4.0 concept, which is a holistic approach to a smart freight wagon. The reduction of manual processes yields a strong incentive due to high savings in manual labour and increased productivity.},
  language  = {en}
}
@article{PfaffEnning2017,
  author    = {Pfaff, Raphael and Enning, Manfred},
  title     = {G{\"u}terwagen 4.0 - Der G{\"u}terwagen f{\"u}r das Internet der Dinge. Teil 2: Ausgew{\"a}hlte technische Aspekte und Prozesse},
  series = {ETR - Eisenbahntechnische Rundschau},
  volume    = {66},
  journal   = {ETR - Eisenbahntechnische Rundschau},
  number    = {5},
  publisher = {DVV Media Group},
  address   = {Hamburg},
  issn      = {0013-2845},
  pages     = {74 -- 77},
  year      = {2017},
  language  = {de}
}
@article{PfaffEnning2017,
  author    = {Pfaff, Raphael and Enning, Manfred},
  title     = {Die nachhaltige Alternative zum autonomen Lastwagen},
  series = {Deine Bahn},
  journal   = {Deine Bahn},
  number    = {10},
  pages     = {22 -- 26},
  year      = {2017},
  language  = {de}
}
@article{PfaffBurnham2009,
  author    = {Pfaff, Raphael and Burnham, Keith J.},
  title     = {On abstraction and interpretability: a behavioural perspective},
  series = {Systems Science},
  volume    = {Vol. 35},
  journal   = {Systems Science},
  number    = {Iss. 2},
  issn      = {0137-1223},
  pages     = {19 -- 26},
  year      = {2009},
  language  = {en}
}
@article{PfaffBabilon2023,
  author    = {Pfaff, Raphael and Babilon, Katharina},
  title     = {Railway Challenge - moderne Auflage der Rainhill Trials?},
  series = {Eisenbahntechnische Rundschau : ETR ; Impulsgeber f{\"u}r das System Bahn},
  volume    = {2023},
  journal   = {Eisenbahntechnische Rundschau : ETR ; Impulsgeber f{\"u}r das System Bahn},
  number    = {4},
  publisher = {DVV Media Group},
  address   = {Hamburg},
  issn      = {0013-2845},
  pages     = {55 -- 58},
  year      = {2023},
  abstract  = {Die IMechE Railway Challenge wird j{\"a}hrlich in Stapleford, Großbritannien ausgetragen. Im Rahmen der Challenge entwickeln und bauen Studierende eine Lokomotive und vergleichen sich in verschiedenen Disziplinen, darunter eine automatisierte Zielbremsung, optimale Energier{\"u}ckgewinnung beim Bremsen und minimale Ger{\"a}uschemissionen. Neben diesen und weiteren technischen Wettbewerbsdisziplinen treten die Fahrzeuge und die Teams auch in nicht-technischen Disziplinen wie einer Business Case Challenge an.},
  language  = {de}
}
@article{Pfaff2015,
  author    = {Pfaff, Raphael},
  title     = {Praxisnahe Ausbildung im Fach Schienenfahrzeugtechnik},
  series = {Deine Bahn},
  journal   = {Deine Bahn},
  number    = {8},
  publisher = {Eisenbahn-Fachverlag},
  address   = {Mainz},
  issn      = {0172-4479},
  pages     = {52 -- 55},
  year      = {2015},
  language  = {de}
}
@article{Pfaff2017,
  author    = {Pfaff, Raphael},
  title     = {Einsatz von offenen Onlinekursen in der Eisenbahnlehre},
  series = {Deine Bahn},
  journal   = {Deine Bahn},
  number    = {1},
  publisher = {Bahn-Fachverlag},
  address   = {Berlin},
  issn      = {0948-7263},
  pages     = {12 -- 16},
  year      = {2017},
  abstract  = {Eigene positive Erfahrungen mit Onlinekursen sowie die geringen Studierendenzahlen in der Pr{\"a}senzlehre gaben den Anstoß zu einem Experiment mit einem offenen Onlinekurs auf der Plattform Udemy. Die Erfahrungen sowohl bei der Erstellung und als auch im Lehrbetrieb waren positiv und f{\"u}hrten zu einer neuen Besch{\"a}ftigung mit Inhalten und Lernenden, getrieben durch die Anforderungen der Lernplattform.},
  language  = {de}
}
@article{Pfaff2017,
  author    = {Pfaff, Raphael},
  title     = {Apps f{\"u}r den G{\"u}terwagen? Wie der G{\"u}terwagen 4.0 die effiziente Integration der G{\"u}terbahn in ERTMS erm{\"o}glicht},
  series = {Ingenieurspiegel},
  journal   = {Ingenieurspiegel},
  number    = {2},
  pages     = {1 -- 2},
  year      = {2017},
  language  = {de}
}
@article{Pfaff2023,
  author    = {Pfaff, Raphael},
  title     = {Braking distance prediction for vehicle consist in low-speed on-sight operation: a Monte Carlo approach},
  series = {Railway Engineering Science},
  volume    = {31},
  journal   = {Railway Engineering Science},
  number    = {2},
  publisher = {SpringerOpen},
  issn      = {2662-4753 (eISSN)},
  doi       = {10.1007/s40534-023-00303-7},
  pages     = {135 -- 144},
  year      = {2023},
  abstract  = {The first and last mile of a railway journey, in both freight and transit applications, constitutes a high effort and is either non-productive (e.g. in the case of depot operations) or highly inefficient (e.g. in industrial railways). These parts are typically managed on-sight, i.e. with no signalling and train protection systems ensuring the freedom of movement. This is possible due to the rather short braking distances of individual vehicles and shunting consists. The present article analyses the braking behaviour of such shunting units. For this purpose, a dedicated model is developed. It is calibrated on published results of brake tests and validated against a high-definition model for low-speed applications. Based on this model, multiple simulations are executed to obtain a Monte Carlo simulation of the resulting braking distances. Based on the distribution properties and established safety levels, the risk of exceeding certain braking distances is evaluated and maximum braking distances are derived. Together with certain parameters of the system, these can serve in the design and safety assessment of driver assistance systems and automation of these processes.},
  language  = {en}
}
@article{PeekenBennerPlatt1989,
  author    = {Peeken, Heinz and Benner, Joachim and Platt, Werner},
  title     = {Ausfallkriterien elastomerbest{\"u}ckter Wellenkupplungen},
  series = {Antriebstechnik : Konstruktion, Entwicklung und Anwendung von Antrieben und Steuerungen ; Organ der Forschungsvereinigung Antriebstechnik e.V.},
  volume    = {28},
  journal   = {Antriebstechnik : Konstruktion, Entwicklung und Anwendung von Antrieben und Steuerungen ; Organ der Forschungsvereinigung Antriebstechnik e.V.},
  number    = {11},
  publisher = {Vereinigte Fachverl.},
  address   = {Mainz},
  issn      = {0341-2652},
  pages     = {85 -- 88},
  year      = {1989},
  language  = {de}
}
@article{PeekenAbdelLatifBenner1985,
  author    = {Peeken, Heinz and Abdel-Latif, Lotfie Ahmed and Benner, Joachim},
  title     = {Einfluss der {\"O}lversch{\"a}umung auf Axiallager mit Kreis- und Michell-Segmenten},
  series = {VDI-Z : Zeitschrift f{\"u}r integrierte Produktion},
  volume    = {127},
  journal   = {VDI-Z : Zeitschrift f{\"u}r integrierte Produktion},
  number    = {5},
  publisher = {Springer-VDI-Verl},
  address   = {D{\"u}sseldorf},
  issn      = {0042-1766},
  pages     = {145 -- 151},
  year      = {1985},
  language  = {de}
}
@article{PancContiuBocanetetal.2019,
  author    = {Panc, Nicolae and Contiu, Glad and Bocanet, Vlad and Thurn, Laura and Sabau, Emilia},
  title     = {The influence of cutting technology on surface wear hardness},
  series = {Academic Journal of Manufacturing Engineering},
  volume    = {17},
  journal   = {Academic Journal of Manufacturing Engineering},
  number    = {3},
  issn      = {1583-7904},
  pages     = {205 -- 210},
  year      = {2019},
  language  = {en}
}
@article{MukherjeeRamazaniYangetal.2011,
  author    = {Mukherjee, Krishnendu and Ramazani, Ali and Yang, Li and Prahl, Ulrich and Bleck, Wolfgang and Reisgen, Uwe and Schleser, Markus and Abdurakhmanov, Aydemir},
  title     = {Characterization of gas metal arc welded hot rolled DP600 steel},
  series = {Steel research international},
  volume    = {Vol. 82},
  journal   = {Steel research international},
  number    = {Iss. 12},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1869-344X (E-Book); 1611-3683 (Print)},
  pages     = {1408 -- 1416},
  year      = {2011},
  language  = {en}
}
@article{MukherjeePrahlBlecketal.2010,
  author    = {Mukherjee, Krishnendu and Prahl, Ulrich and Bleck, Wolfgang and Reisgen, Uwe and Schleser, Markus and Abdurakhmanov, Aydemir},
  title     = {Characterization and modelling techniques for gas metal arc welding of DP 600 sheet steels},
  series = {Materialwissenschaft und Werkstofftechnik},
  volume    = {41},
  journal   = {Materialwissenschaft und Werkstofftechnik},
  number    = {11},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1521-4052},
  doi       = {10.1002/mawe.201000692},
  pages     = {972 -- 983},
  year      = {2010},
  abstract  = {The objectives of the present work are to characterize the Gas Metal Arc Welding process of DP 600 sheet steel and to summarize the modelling techniques. The time-temperature evolution during the welding cycle was measured experimentally and modelled with the softwaretool SimWeld. To model the phase transformations during the welding cycle dilatometer tests were done to quantify the parameters for phase field modelling by MICRESS®. The important input parameters are interface mobility, nucleation density, etc. A contribution was made to include austenite to bainite transformation in MICRESS®. This is useful to predict the microstructure in the fast cooling segments. The phase transformation model is capable to predict the microstructure along the heating and cooling cycles of welding. Tensile tests have shown the evidence of failure at the heat affected zone, which has the ferrite-tempered martensite microstructure.},
  language  = {en}
}
@article{MichauxMatternKallweit2018,
  author    = {Michaux, F. and Mattern, P. and Kallweit, Stephan},
  title     = {RoboPIV: how robotics enable PIV on a large industrial scale},
  series = {Measurement Science and Technology},
  volume    = {29},
  journal   = {Measurement Science and Technology},
  number    = {7},
  publisher = {IOP},
  address   = {Bristol},
  issn      = {1361-6501},
  doi       = {10.1088/1361-6501/aab5c1},
  pages     = {074009},
  year      = {2018},
  abstract  = {This work demonstrates how the interaction between particle image velocimetry (PIV) and robotics can massively increase measurement efficiency. The interdisciplinary approach is shown using the complex example of an automated, large scale, industrial environment: a typical automotive wind tunnel application. Both the high degree of flexibility in choosing the measurement region and the complete automation of stereo PIV measurements are presented. The setup consists of a combination of three robots, individually used as a 6D traversing unit for the laser illumination system as well as for each of the two cameras. Synchronised movements in the same reference frame are realised through a master-slave setup with a single interface to the user. By integrating the interface into the standard wind tunnel management system, a single measurement plane or a predefined sequence of several planes can be requested through a single trigger event, providing the resulting vector fields within minutes. In this paper, a brief overview on the demands of large scale industrial PIV and the existing solutions is given. Afterwards, the concept of RoboPIV is introduced as a new approach. In a first step, the usability of a selection of commercially available robot arms is analysed. The challenges of pose uncertainty and importance of absolute accuracy are demonstrated through comparative measurements, explaining the individual pros and cons of the analysed systems. Subsequently, the advantage of integrating RoboPIV directly into the existing wind tunnel management system is shown on basis of a typical measurement sequence. In a final step, a practical measurement procedure, including post-processing, is given by using real data and results. Ultimately, the benefits of high automation are demonstrated, leading to a drastic reduction in necessary measurement time compared to non-automated systems, thus massively increasing the efficiency of PIV measurements.},
  language  = {en}
}
@article{MautnerForsterKornhuberetal.2008,
  author    = {Mautner, Karin and Forster, Ralf and Kornhuber, Ralf and Sander, Oliver},
  title     = {Fast and Reliable Pricing of American Options with Local Volatility / Forster, Ralf ; Kornhuber, Ralf ; Mautner, Karin ; Sander, Oliver},
  series = {Domain Decomposition Methods in Science and Engineering XVII},
  journal   = {Domain Decomposition Methods in Science and Engineering XVII},
  isbn      = {978-3-540-75198-4},
  pages     = {383 -- 390},
  year      = {2008},
  language  = {en}
}
@article{LuftLuftArntz2023,
  author    = {Luft, Angela and Luft, Nils and Arntz, Kristian},
  title     = {A basic description logic for service-oriented architecture in factory planning and operational control in the age of industry 4.0},
  series = {Applied Sciences},
  volume    = {2023},
  journal   = {Applied Sciences},
  number    = {13},
  publisher = {MDPI},
  address   = {Basel},
  doi       = {10.3390/app13137610},
  pages     = {Artikel 7610},
  year      = {2023},
  abstract  = {Manufacturing companies across multiple industries face an increasingly dynamic and unpredictable environment. This development can be seen on both the market and supply side. To respond to these challenges, manufacturing companies must implement smart manufacturing systems and become more flexible and agile. The flexibility in operational planning regarding the scheduling and sequencing of customer orders needs to be increased and new structures must be implemented in manufacturing systems' fundamental design as they constitute much of the operational flexibility available. To this end, smart and more flexible solutions for production planning and control (PPC) are developed. However, scheduling or sequencing is often only considered isolated in a predefined stable environment. Moreover, their orientation on the fundamental logic of the existing IT solutions and their applicability in a dynamic environment is limited. This paper presents a conceptual model for a task-based description logic that can be applied to factory planning, technology planning, and operational control. By using service-oriented architectures, the goal is to generate smart manufacturing systems. The logic is designed to allow for easy and automated maintenance. It is compatible with the existing resource and process allocation logic across operational and strategic factory and production planning.},
  language  = {en}
}
@article{LuftBremenLuft2023,
  author    = {Luft, Angela and Bremen, Sebastian and Luft, Nils},
  title     = {A cost/benefit and flexibility evaluation framework for additive technologies in strategic factory planning},
  series = {Processes},
  volume    = {11},
  journal   = {Processes},
  number    = {7},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {2227-9717},
  doi       = {10.3390/pr11071968},
  pages     = {Artikel 1968},
  year      = {2023},
  abstract  = {There is a growing demand for more flexibility in manufacturing to counter the volatility and unpredictability of the markets and provide more individualization for customers. However, the design and implementation of flexibility within manufacturing systems are costly and only economically viable if applicable to actual demand fluctuations. To this end, companies are considering additive manufacturing (AM) to make production more flexible. This paper develops a conceptual model for the impact quantification of AM on volume and mix flexibility within production systems in the early stages of the factory-planning process. Together with the model, an application guideline is presented to help planners with the flexibility quantification and the factory design process. Following the development of the model and guideline, a case study is presented to indicate the potential impact additive technologies can have on manufacturing flexibility Within the case study, various scenarios with different production system configurations and production programs are analyzed, and the impact of the additive technologies on volume and mix flexibility is calculated. This work will allow factory planners to determine the potential impacts of AM on manufacturing flexibility in an early planning stage and design their production systems accordingly.},
  language  = {en}
}
@article{LeidingerNoistenWollert2012,
  author    = {Leidinger, Rafael and Noisten, Thomas and Wollert, J{\"o}rg},
  title     = {Realtime automation networks in moVing industrial environments},
  series = {Journal of systemics, cybernetics and informatics},
  volume    = {Vol. 10},
  journal   = {Journal of systemics, cybernetics and informatics},
  number    = {Iss. 2},
  publisher = {IIIC},
  address   = {Orlando},
  issn      = {1690-4532},
  pages     = {52 -- 56},
  year      = {2012},
  abstract  = {The radio-based wireless data communication has made the realization of new technical solutions possible in many fields of the automation technology (AT). For about ten years, a constant disproportionate growth of wireless technologies can be observed in the automation technology. However, it shows that especially for the AT, conventional technologies of office automation are unsuitable and/or not manageable. The employment of mobile services in the industrial automation technology has the potential of significant cost and time savings. This leads to an increased productivity in various fields of the AT, for example in the factory and process automation or in production logistics. In this paper technologies and solutions for an automation-suited supply of mobile wireless services will be introduced under the criteria of real time suitability, IT-security and service orientation. Emphasis will be put on the investigation and development of wireless convergence layers for different radio technologies, on the central provision of support services for an easy-to-use, central, backup enabled management of combined wired / wireless networks and on the study on integrability in a Profinet real-time Ethernet network.},
  language  = {en}
}
@article{KaemperThuerigenEhrfeldetal.1996,
  author    = {K{\"a}mper, Klaus-Peter and Th{\"u}rigen, C. and Ehrfeld, W. and Hagemann, B.},
  title     = {Gesichtspunkte beim Miniaturisieren von Umlaufr{\"a}dergetrieben. Th{\"u}rigen, C.; Ehrfeld, W. ; Hagemann, B.; K{\"a}mper, K.-P.; Lehr, H.; Michel, F.},
  series = {Innovative Kleinantriebe : Tagung Mainz, 9. und 10. Mai 1996 / VDE-VDI-Gesellschaft Mikroelektronik, Mikro- und Feinwerktechnik, GMM},
  journal   = {Innovative Kleinantriebe : Tagung Mainz, 9. und 10. Mai 1996 / VDE-VDI-Gesellschaft Mikroelektronik, Mikro- und Feinwerktechnik, GMM},
  publisher = {VDI-Verl.},
  address   = {D{\"u}sseldorf},
  isbn      = {3-18-091269-3},
  pages     = {235},
  year      = {1996},
  language  = {de}
}
@article{KaemperSchulzEhrfeldetal.1994,
  author    = {K{\"a}mper, Klaus-Peter and Schulz, C. and Ehrfeld, W. and Erbel, R.},
  title     = {LIGA Fabricated Microsystems for Medical and Related Applications. Schulz, C.; Ehrfeld, W.; Erbel, R.; K{\"a}mper, K.-P.; Koch, L.; Lehr, H.; Roth, T.},
  series = {3-Day Course on Microengineering in Medicine and Biology and its Applications to Minimally Invasive Techniques for Therapy and Medical Diagnosis : EURO-BME 94; October 5, 6, and 7, 1994, Swiss Federal Institute of Technology, EPFL, Lausanne, Switzerland / [the 1994 EURO-BME Microengineering in Medicine and Biology Training Course. Staff: Christian D. Depeursinge ...]},
  journal   = {3-Day Course on Microengineering in Medicine and Biology and its Applications to Minimally Invasive Techniques for Therapy and Medical Diagnosis : EURO-BME 94; October 5, 6, and 7, 1994, Swiss Federal Institute of Technology, EPFL, Lausanne, Switzerland / [the 1994 EURO-BME Microengineering in Medicine and Biology Training Course. Staff: Christian D. Depeursinge ...]},
  publisher = {REPRO EPFL},
  address   = {Lausanne},
  pages     = {Getr. Z{\"a}hlung : Ill., graph. Darst.},
  year      = {1994},
  language  = {en}
}
@article{KaemperSchulzArnoldetal.1995,
  author    = {K{\"a}mper, Klaus-Peter and Schulz, C. and Arnold, J. and Detter, H.},
  title     = {Anwendungen der LIGA-Technik f{\"u}r medizinische Diagnose- und Therapiesysteme. Schulz, C.; Arnold, J.; Detter, H.; D{\"o}pper, J.; Ehrfeld, W., Erbel, R.; K{\"a}mper, K.-P.; Koch, L.; Lehr, H.; Roth, T.},
  series = {Elektrotechnik und Informationstechnik. 112 (1995), H. 9},
  journal   = {Elektrotechnik und Informationstechnik. 112 (1995), H. 9},
  isbn      = {0932-383X},
  pages     = {493},
  year      = {1995},
  language  = {de}
}
@article{KaemperSchmittWesneretal.1989,
  author    = {K{\"a}mper, Klaus-Peter and Schmitt, W. and Wesner, D. A. and G{\"u}ntherodt, G.},
  title     = {Thickness dependence of the spin- and angle-resolved photoemission of ultrathin, epitaxial Ni(111)/W(110) layers},
  series = {Applied Physics A: Materials Science and Processing. 49 (1989), H. 6},
  journal   = {Applied Physics A: Materials Science and Processing. 49 (1989), H. 6},
  isbn      = {1432-0630},
  pages     = {573 -- 578},
  year      = {1989},
  language  = {en}
}
@article{KaemperSchmittGuentherodtetal.1987,
  author    = {K{\"a}mper, Klaus-Peter and Schmitt, W. and G{\"u}ntherodt, G. and Gambino, R. J.},
  title     = {CrO2—A New Half-Metallic Ferromagnet? K{\"a}mper, K.-P.; Schmitt, W.; G{\"u}ntherodt, G.; Gambino, R. J., Ruf, R.},
  series = {Physical Review Letters. 59 (1987), H. 24},
  journal   = {Physical Review Letters. 59 (1987), H. 24},
  isbn      = {1079-7114},
  pages     = {2788 -- 2791},
  year      = {1987},
  language  = {en}
}
@article{KaemperSchmittGuentherodt1987,
  author    = {K{\"a}mper, Klaus-Peter and Schmitt, W. and G{\"u}ntherodt, G.},
  title     = {The influence of adsorbates on the spin-resolved photoemission of Ni(110). Schmitt, W.; K{\"a}mper, K.-P.; G{\"u}ntherodt, G.},
  series = {Surface Science. 189/190 (1987)},
  journal   = {Surface Science. 189/190 (1987)},
  isbn      = {0039-6028},
  pages     = {741 -- 507},
  year      = {1987},
  language  = {en}
}
@article{KaemperSchmittGuentherodt1987,
  author    = {K{\"a}mper, Klaus-Peter and Schmitt, W. and G{\"u}ntherodt, G.},
  title     = {Effect of adsorbates on the spin-polarized photoemission of itinerant ferromagnets. Schmitt, W.; K{\"a}mper, K.-P.; G{\"u}ntherodt, G.},
  series = {Physical Review B. 36 (1987), H. 7},
  journal   = {Physical Review B. 36 (1987), H. 7},
  isbn      = {1095-3795},
  pages     = {3763 -- 3768},
  year      = {1987},
  language  = {en}
}
@article{KaemperSchmittGuentherodt1988,
  author    = {K{\"a}mper, Klaus-Peter and Schmitt, W. and G{\"u}ntherodt, G.},
  title     = {Thickness dependence of the electronic structure of ultrathin, epitaxial Ni(111)/W(110) layers.},
  series = {Physical Review B. 38 (1988), H. 14},
  journal   = {Physical Review B. 38 (1988), H. 14},
  isbn      = {1095-3795},
  pages     = {9451 -- 9456},
  year      = {1988},
  language  = {en}
}
@article{KaemperSchmittGuentherodt1990,
  author    = {K{\"a}mper, Klaus-Peter and Schmitt, W. and G{\"u}ntherodt, G.},
  title     = {Temperature and wave-vector dependence of the spin-split band structure of Ni(111) along the \&\#915;-L line},
  series = {Physical Review B. 42 (1990), H. 16},
  journal   = {Physical Review B. 42 (1990), H. 16},
  isbn      = {1095-3795},
  pages     = {10696 -- 10705},
  year      = {1990},
  language  = {en}
}
@article{KaemperSchmittGuentherodt1988,
  author    = {K{\"a}mper, Klaus-Peter and Schmitt, W. and G{\"u}ntherodt, G.},
  title     = {Temperature dependence of the exchange splitting of Ni along the \&\#61511;-L line},
  series = {Journal de physique. 49 (1988), H. 12. Supplement, Colloque C8},
  journal   = {Journal de physique. 49 (1988), H. 12. Supplement, Colloque C8},
  pages     = {39 -- 40},
  year      = {1988},
  language  = {en}
}
@article{KaemperPicardSchuetze2007,
  author    = {K{\"a}mper, Klaus-Peter and Picard, Antoni and Sch{\"u}tze, Andreas},
  title     = {K{\"o}nnen Studierende einen piezoresistiven Drucksensor in einer Woche selbst{\"a}ndig fertigen?},
  series = {Interesse wecken, Motivation steigern, Praxisorientiert ausbilden : Nachwuchsf{\"o}rderung und innovative Ausbildung in Sensorik und Mikrosystemtechnik : [anl{\"a}ßlich der Sondersession auf der Sensor+Test 2007]},
  journal   = {Interesse wecken, Motivation steigern, Praxisorientiert ausbilden : Nachwuchsf{\"o}rderung und innovative Ausbildung in Sensorik und Mikrosystemtechnik : [anl{\"a}ßlich der Sondersession auf der Sensor+Test 2007]},
  publisher = {AWNET},
  address   = {Berlin},
  isbn      = {978-3-89750-148-5},
  pages     = {26 -- 35},
  year      = {2007},
  language  = {de}
}
@article{KaemperPicardBrilletal.2003,
  author    = {K{\"a}mper, Klaus-Peter and Picard, Antoni and Brill, Manfred and Cassel, Detlev and Jentsch, Andreas and Merten, Sabine and Rollwa, Markus},
  title     = {The Virtual Clean Room - a new tool in teaching MST process technologies},
  year      = {2003},
  abstract  = {The Virtual Clean Room - a new tool in teaching MST process technologies University education in high-technology fields like MST is not complete without intensive laboratory sessions. Students cannot fully grasp the complexity and the special problems related to the manufacturing of microsystems without a thorough hands-on experience in a MST clean room.},
  subject      = {Virtuelle Maschine},
  language  = {en}
}
@article{KaemperPicardBrilletal.2003,
  author    = {K{\"a}mper, Klaus-Peter and Picard, Antoni and Brill, Manfred and Cassel, Detlef (u.a.)},
  title     = {The Virtual Cleanroom - a new tool in teaching MST process technologies},
  series = {mst news International newsletter on micro - nano Integration (2003)},
  journal   = {mst news International newsletter on micro - nano Integration (2003)},
  isbn      = {0948-3128},
  pages     = {35 -- 36},
  year      = {2003},
  language  = {en}
}
@article{KaemperPicardBrilletal.2002,
  author    = {K{\"a}mper, Klaus-Peter and Picard, Antoni and Brill, Manfred and Cassel, Detlef (u.a.)},
  title     = {Neue Medien f{\"u}r die praktische MST Ausbildung},
  series = {Rundschau, FH Kaiserslautern,. Ausgabe Ju (2002)},
  journal   = {Rundschau, FH Kaiserslautern,. Ausgabe Ju (2002)},
  pages     = {14 -- 15},
  year      = {2002},
  language  = {de}
}
@article{KaemperPicardSchuetzeetal.2006,
  author    = {K{\"a}mper, Klaus-Peter and Picard, A. and Sch{\"u}tze, A. and Wallach, D.},
  title     = {Adopting the Foundry Concept of Semiconductor Fabrication on Educational Schemes and the Virtual Technology Lab (VTL). Picard, A.; K{\"a}mper, K.-P.; Sch{\"u}tze, A.; Wallach, D.; Walter, T.},
  series = {Mst-News (2006)},
  journal   = {Mst-News (2006)},
  isbn      = {0948-3128},
  pages     = {15, 16 -- u. 35},
  year      = {2006},
  language  = {en}
}
@article{KaemperPicardSchuetze2005,
  author    = {K{\"a}mper, Klaus-Peter and Picard, A. and Sch{\"u}tze, A.},
  title     = {Die Ausbildungsfoundry pro-mst und das virtuelle Technologielabor: Ein Konzept f{\"u}r eine exzellente praktische MST-Ausbildung in einem modernen Reinraum zu niedrigen Gesamtkosten. Picard, A.; K{\"a}mper, K.-P.; Sch{\"u}tze, A.},
  series = {Mikrosystemtechnik-Kongress 2005 : 10. bis 12. Oktober 2005 in Freiburg ; gemeinsame Veranstaltung von: Bundesministerium f{\"u}r Bildung und Forschung (BMBF) ... / organisiert von: GMM VDE/VDI-Gesellschaft Mikroelektronik, Mikro- und Feinwerktechnik ... Chairman: Roland Zengerle},
  journal   = {Mikrosystemtechnik-Kongress 2005 : 10. bis 12. Oktober 2005 in Freiburg ; gemeinsame Veranstaltung von: Bundesministerium f{\"u}r Bildung und Forschung (BMBF) ... / organisiert von: GMM VDE/VDI-Gesellschaft Mikroelektronik, Mikro- und Feinwerktechnik ... Chairman: Roland Zengerle},
  publisher = {VDE-Verl.},
  address   = {Berlin},
  isbn      = {3-8007-2926-1},
  pages     = {127},
  year      = {2005},
  language  = {de}
}
@article{KaemperPappasMilleretal.1991,
  author    = {K{\"a}mper, Klaus-Peter and Pappas, D. P. and Miller, B. P. and Hopster, H.},
  title     = {Spin-dependent electron attenuation by transmission through thin ferromagnetic films . Pappas, D. P.; K{\"a}mper,K.-P.; Miller, B. P.; Hopster, H.; Fowler, D. E.; Brundle, C. R.; Luntz, A. C.; Shen, Z.-X.},
  series = {Physical Review Letters. 66 (1991), H. 4},
  journal   = {Physical Review Letters. 66 (1991), H. 4},
  isbn      = {1079-7114},
  pages     = {504 -- 507},
  year      = {1991},
  language  = {en}
}
@article{KaemperPappasMilleretal.1991,
  author    = {K{\"a}mper, Klaus-Peter and Pappas, D. P. and Miller, B. P. and Hopster, H.},
  title     = {Magnetism of ultrathin films of Fe on Cu(100). Pappas, D. P; K{\"a}mper, K.-P.; Miller, B. P.; Hopster, H.; Fowler, D. E.; Luntz, A. C.; Brundle, C.R.; Shen, Z.-X.},
  series = {Journal of Applied Physics. 69 (1991), H. 8},
  journal   = {Journal of Applied Physics. 69 (1991), H. 8},
  isbn      = {1089-7550},
  pages     = {5209 -- 521},
  year      = {1991},
  language  = {en}
}
@article{KaemperPappasHopster1990,
  author    = {K{\"a}mper, Klaus-Peter and Pappas, D. P. and Hopster, H.},
  title     = {Reversible transition between perpendicular and in-plane magnetization in ultrathin films. Pappas, D. P.; K{\"a}mper, K.-P.; Hopster, H.},
  series = {Physical Review Letters. 64 (1990), H. 26},
  journal   = {Physical Review Letters. 64 (1990), H. 26},
  isbn      = {1079-7114},
  pages     = {3179 -- 3182},
  year      = {1990},
  language  = {en}
}
@article{KaemperMertenBrilletal.2003,
  author    = {K{\"a}mper, Klaus-Peter and Merten, Sabine and Brill, Manfred and Picard, Antoni (u.a.)},
  title     = {Vom virtuellen Wafer zum realen Drucksensor: Information - Communication - Knowledge engineering education today},
  series = {Schriftenreihe Ingenieurp{\"a}dagogik : Hochschule f{\"u}r Bildungswissenschaften in Klagenfurt ; Band 49},
  journal   = {Schriftenreihe Ingenieurp{\"a}dagogik : Hochschule f{\"u}r Bildungswissenschaften in Klagenfurt ; Band 49},
  pages     = {318 -- 321},
  year      = {2003},
  language  = {de}
}