@article{Wollert2018,
  author    = {Wollert, J{\"o}rg},
  title     = {TSN - Schluss mit dem Feldbuskrieg?},
  series = {Design \& Elektronik},
  journal   = {Design \& Elektronik},
  number    = {3},
  publisher = {WEKA-Fachmedien},
  address   = {M{\"u}nchen},
  issn      = {0933-8667},
  pages     = {26 -- 31},
  year      = {2018},
  language  = {de}
}
@article{GebhardtPlumMatharetal.1996,
  author    = {Gebhardt, Andreas and Plum, H.D. and Mathar, W. and Wolf, M.},
  title     = {TrueForm - erste Anwendung des neuen Sintermaterials mit Vakuumgießen und Investmentgießen},
  pages     = {231 -- 236},
  year      = {1996},
  language  = {de}
}
@article{BucurLazarescuPopetal.2019,
  author    = {Bucur, Alexandru and Lazarescu, Lucian and Pop, Grigore Marian and Achimas, Gheorghe and Gebhardt, Andreas},
  title     = {Tribological performance of biodegradable lubricants under different surface roughness of tools},
  series = {Academic Journal of Manufacturing Engineering},
  volume    = {17},
  journal   = {Academic Journal of Manufacturing Engineering},
  number    = {1},
  issn      = {1583-7904},
  pages     = {172 -- 178},
  year      = {2019},
  language  = {en}
}
@inproceedings{PfaffSappler2014,
  author    = {Pfaff, Raphael and Sappler, Magnus},
  title     = {TRANSPACT : die automatische Mittelpufferkupplung f{\"u}r attraktiven G{\"u}terverkehr},
  series = {RAIL-FREIGHT 2014 : Zukunft des Schieneng{\"u}terverkehrs ; Technologie - {\"O}konomie - {\"O}kologie - Verkehrspolitik ; [Tagungsdokumentation des IV. Internationalen Fachsymposiums zum Thema Schieneng{\"u}terverkehr] (Bahntechnik Aktuell ; 48)},
  booktitle = {RAIL-FREIGHT 2014 : Zukunft des Schieneng{\"u}terverkehrs ; Technologie - {\"O}konomie - {\"O}kologie - Verkehrspolitik ; [Tagungsdokumentation des IV. Internationalen Fachsymposiums zum Thema Schieneng{\"u}terverkehr] (Bahntechnik Aktuell ; 48)},
  publisher = {Verl. d. IFV Bahntechnik},
  address   = {Berlin},
  isbn      = {978-3-940727-41-1},
  pages     = {121 -- 128},
  year      = {2014},
  language  = {de}
}
@inproceedings{PfaffSchmidtEnning2017,
  author    = {Pfaff, Raphael and Schmidt, B. D. and Enning, Manfred},
  title     = {Towards inclusion of the freight rail system in the industrial internet of things - Wagon 4.0},
  series = {Stephenson Conference, London, March 2017},
  booktitle = {Stephenson Conference, London, March 2017},
  pages     = {1 -- 10},
  year      = {2017},
  language  = {en}
}
@inproceedings{FerreinKallweitLautermann2012,
  author    = {Ferrein, Alexander and Kallweit, Stephan and Lautermann, Mark},
  title     = {Towards an autonomous pilot system for a tunnel boring machine},
  series = {5th Robotics and Mechatronics Conference of South Africa (ROBMECH) : 26 - 27 November 2012 ; CSIR International Conference Centre Gauteng South Africa},
  booktitle = {5th Robotics and Mechatronics Conference of South Africa (ROBMECH) : 26 - 27 November 2012 ; CSIR International Conference Centre Gauteng South Africa},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  isbn      = {978-1-4673-5183-6},
  year      = {2012},
  language  = {en}
}
@misc{TroederBennerAltherretal.1999,
  author    = {Troeder, Christoph and Benner, Joachim and Altherr, Marcel and Schiessl, Helmut F.},
  title     = {Topfspinnvorrichtung : [Offenlegungsschrift]},
  publisher = {Deutsches Patent- und Markenamt ; Weltorganisation f{\"u}r Geistiges Eigentum},
  address   = {M{\"u}nchen ; Genf},
  year      = {1999},
  abstract  = {"The invention relates to a pot spinning device (1) comprising a thread guide (9) which can be moved backwards and forwards and introduced into an opening (8) on the end side of the pot (7) so as to deposit a thread on the inside wall of a spinning pot. In order to improve upon pot spinning devices of this kind, the spinning pot is connected to an electric drive mechanism (10), mounted in magnetic bearings and provided with a gastight housing. Said housing encompasses the spinning pot (7), is open in the area where there is an opening in the end side of the pot and is provided with a seal (19) to seal off the intermediate area (17) between the housing and spinning pot. The housing is also connected to a supply of light-gas via a feed line (18), thereby enabling a light-gas atmosphere to be maintained in the intermediate area."},
  language  = {de}
}
@article{KallweitKaminskyRossietal.2005,
  author    = {Kallweit, Stephan and Kaminsky, R. and Rossi, M. and Morbiducci, U.},
  title     = {Time resolved PIV technique for high temporal resolution measurements of prosthetic heart valves fluid dynamics / Kaminsky, R. ; Rossi, M. ; Morbiducci, U. ; Scalise, L. ; Catellini, P. ; Kallweit, S. ; Verdonck, P. ; Grigioni, M.},
  series = {The International Journal of Artificial Organs. 28 (2005), H. 9},
  journal   = {The International Journal of Artificial Organs. 28 (2005), H. 9},
  isbn      = {1724-6040},
  pages     = {946},
  year      = {2005},
  language  = {en}
}
@article{KallweitVanlanduitVanherzeeleetal.2007,
  author    = {Kallweit, Stephan and Vanlanduit, S. and Vanherzeele, J. and Brouns, M.},
  title     = {Time resolved PIV reconstruction of periodic flows / Vanlanduit, S. ; Vanherzeele, J. ; Kallweit, S. ; Brouns, M. ; Guillaume, P.},
  series = {PIV'07, 7th International Symposium on Particle Image Velocimetry, Roma, IT, Sep 11-14, 2007},
  journal   = {PIV'07, 7th International Symposium on Particle Image Velocimetry, Roma, IT, Sep 11-14, 2007},
  pages     = {1 -- 14},
  year      = {2007},
  language  = {en}
}
@inproceedings{GregorioFatigatiKallweit2015,
  author    = {Gregorio, Fabrizio de and Fatigati, Giovanni and Kallweit, Stephan},
  title     = {Tiltrotor airframe flow field characterization by SPIV},
  series = {11th International Symposium on Partivle Image Velocimetry - PIV15 , Santa Barbara, California, Sept 14-16, 2015},
  booktitle = {11th International Symposium on Partivle Image Velocimetry - PIV15 , Santa Barbara, California, Sept 14-16, 2015},
  pages     = {15 S.},
  year      = {2015},
  language  = {en}
}
@article{KaemperSchmittWesneretal.1989,
  author    = {K{\"a}mper, Klaus-Peter and Schmitt, W. and Wesner, D. A. and G{\"u}ntherodt, G.},
  title     = {Thickness dependence of the spin- and angle-resolved photoemission of ultrathin, epitaxial Ni(111)/W(110) layers},
  series = {Applied Physics A: Materials Science and Processing. 49 (1989), H. 6},
  journal   = {Applied Physics A: Materials Science and Processing. 49 (1989), H. 6},
  isbn      = {1432-0630},
  pages     = {573 -- 578},
  year      = {1989},
  language  = {en}
}
@article{KaemperSchmittGuentherodt1988,
  author    = {K{\"a}mper, Klaus-Peter and Schmitt, W. and G{\"u}ntherodt, G.},
  title     = {Thickness dependence of the electronic structure of ultrathin, epitaxial Ni(111)/W(110) layers.},
  series = {Physical Review B. 38 (1988), H. 14},
  journal   = {Physical Review B. 38 (1988), H. 14},
  isbn      = {1095-3795},
  pages     = {9451 -- 9456},
  year      = {1988},
  language  = {en}
}
@article{AbdelLatifPeekenBenner1985,
  author    = {Abdel-Latif, Lotfie Ahmed and Peeken, Heinz and Benner, Joachim},
  title     = {Thermohydrodynamic analysis of thrust-bearing with circular pads running on bubbly oil (BTHD-theory)},
  series = {Journal of tribology},
  volume    = {107},
  journal   = {Journal of tribology},
  number    = {4},
  isbn      = {0742-4787},
  issn      = {1528-8897},
  pages     = {527 -- 537},
  year      = {1985},
  language  = {en}
}
@article{WangAnikFrohberg1987,
  author    = {Wang, Mao and Anik, Sabri and Frohberg, Martin G.},
  title     = {Thermodynamics of oxygen in the lead-antimony system at 1173 K},
  series = {Erzmetall : Rohstoffgewinnung, Verarbeitung, Recycling, Umwelttechnik},
  volume    = {40},
  journal   = {Erzmetall : Rohstoffgewinnung, Verarbeitung, Recycling, Umwelttechnik},
  number    = {6},
  issn      = {0044-2658},
  pages     = {316 -- 319},
  year      = {1987},
  language  = {en}
}
@article{AnikFrohberg1988,
  author    = {Anik, Sabri and Frohberg, Martin G.},
  title     = {Thermodynamics of oxygen in the copper-antimony system at 1473K},
  series = {Erzmetall : Rohstoffgewinnung, Verarbeitung, Recycling, Umwelttechnik},
  volume    = {41},
  journal   = {Erzmetall : Rohstoffgewinnung, Verarbeitung, Recycling, Umwelttechnik},
  number    = {10},
  issn      = {0044-2658},
  pages     = {498 -- 501},
  year      = {1988},
  language  = {en}
}
@article{AnikFrohberg1984,
  author    = {Anik, Sabri and Frohberg, Martin G.},
  title     = {Thermodynamics and solubility of oxygen in liquid copper-lead alloys at 1200°C from E.M.F. measurements},
  series = {Berichte der Bunsengesellschaft f{\"u}r physikalische Chemie},
  volume    = {88},
  journal   = {Berichte der Bunsengesellschaft f{\"u}r physikalische Chemie},
  number    = {8},
  issn      = {0940-483X},
  pages     = {707 -- 710},
  year      = {1984},
  language  = {en}
}
@article{AnikFrohberg1987,
  author    = {Anik, Sabri and Frohberg, Martin G.},
  title     = {Thermodynamics and solubility of oxygen in liquid bismuth-lead and bismuth-antimony alloys},
  series = {Berichte der Bunsengesellschaft f{\"u}r physikalische Chemie},
  volume    = {91},
  journal   = {Berichte der Bunsengesellschaft f{\"u}r physikalische Chemie},
  number    = {7},
  issn      = {0940-483X},
  pages     = {790 -- 794},
  year      = {1987},
  language  = {en}
}
@article{FrohbergAnik1985,
  author    = {Frohberg, Martin G. and Anik, Sabri},
  title     = {Thermodynamic relations between component activities and gas solubilities in binary metallic systems},
  series = {Berichte der Bunsengesellschaft f{\"u}r physikalische Chemie},
  volume    = {89},
  journal   = {Berichte der Bunsengesellschaft f{\"u}r physikalische Chemie},
  number    = {2},
  issn      = {0940-483X},
  pages     = {130 -- 134},
  year      = {1985},
  language  = {en}
}
@article{AnikKapoorFrohberg1983,
  author    = {Anik, Sabri and Kapoor, Madan Lal and Frohberg, Martin G.},
  title     = {Thermodynamic behaviour of oxygen in molten substitutional alloy solvents},
  series = {Zeitschrift f{\"u}r Metallkunde},
  volume    = {74},
  journal   = {Zeitschrift f{\"u}r Metallkunde},
  number    = {1},
  issn      = {0044-3093},
  pages     = {53 -- 58},
  year      = {1983},
  language  = {en}
}
@inproceedings{AnikFrohberg1989,
  author    = {Anik, Sabri and Frohberg, Martin G.},
  title     = {Thermodynamic behaviour of oxygen in molten metallic alloys},
  series = {Thermochemistry of alloys : recent developments of experimental methods ; [proceedings of the NATO Advanced Study Institute on Thermochemistry of Alloys, Recent Developments of Experimental Methods, Kiel, F.R.G., August 17 - 27, 1987]. - (NATO ASI series : Series C ; 286)},
  booktitle = {Thermochemistry of alloys : recent developments of experimental methods ; [proceedings of the NATO Advanced Study Institute on Thermochemistry of Alloys, Recent Developments of Experimental Methods, Kiel, F.R.G., August 17 - 27, 1987]. - (NATO ASI series : Series C ; 286)},
  editor    = {Brodowsky, Horst},
  publisher = {Springer},
  address   = {Dordrecht [u.a.]},
  isbn      = {0-7923-0434-9},
  pages     = {419 -- 428},
  year      = {1989},
  language  = {en}
}
@article{ScheikSchleserReisgen2012,
  author    = {Scheik, Sven and Schleser, Markus and Reisgen, Uwe},
  title     = {Thermisches Direktf{\"u}gen von Metall und Kusntstoff: eine Alternative zur Klebtechnik},
  series = {Adh{\"a}sion : Kleben \& Dichten},
  volume    = {56},
  journal   = {Adh{\"a}sion : Kleben \& Dichten},
  number    = {11},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  issn      = {0001-8198 (E-Journal); 0001-8198 (Print)},
  doi       = {10.1007/s35145-012-0005-x},
  pages     = {36 -- 40},
  year      = {2012},
  abstract  = {Im Rahmen des Exzellenzclusters „Integrative Produktionstechnik f{\"u}r Hochlohnl{\"a}nder" der RWTHAachen University werden derzeit alternative Verfahren zur Herstellung von Metall/Kunststoff- Verbindungen untersucht. Eines davon ist das thermische Direktf{\"u}gen, das eine stoffschl{\"u}ssige Verbindung zwischen Kunststoff und Metall erm{\"o}glicht und ohne die Verwendung von Klebstoffen, Haftvermittlern oder mechanischen Verbindungshilfen auskommt.},
  language  = {de}
}
@inproceedings{SchoeneReisgenSchleseretal.2011,
  author    = {Schoene, Jens and Reisgen, Uwe and Schleser, Markus and Jerabek, Jakub},
  title     = {Theoretische und experimentelle Untersuchung des spaltungsinduzierten Versagens von TRC Pr{\"u}fk{\"o}rpern},
  series = {Textilbeton - Theorie und Praxis : Tagungsband zum 6. Kolloquium zu textilbewehrten Tragwerken (CTRS6); gemeinsames Abschlusskolloquium der Sonderforschungsbereiche 528 (Dresden) und 532 (Aachen), Berlin 19.9.2011 - 20.9.2011},
  booktitle = {Textilbeton - Theorie und Praxis : Tagungsband zum 6. Kolloquium zu textilbewehrten Tragwerken (CTRS6); gemeinsames Abschlusskolloquium der Sonderforschungsbereiche 528 (Dresden) und 532 (Aachen), Berlin 19.9.2011 - 20.9.2011},
  editor    = {Curbach, Manfred},
  publisher = {Techn. Univ.},
  address   = {Dresden},
  isbn      = {978-3-86780-245-1},
  pages     = {73 -- 84},
  year      = {2011},
  language  = {de}
}
@inproceedings{ReisgenSchoeneSchleseretal.2010,
  author    = {Reisgen, Uwe and Schoene, Jens and Schleser, Markus and Jerabek, Jakub and Keil, Allessandra},
  title     = {Theoretical and experimental investigations on textile-reinforced concrete spalling behavior},
  series = {Textile reinforced concrete : 2nd ICTRC : International RILEM Conference on Material Science : Aachen Germany, September 6 - 8, 2010. Vol. 1. (RILEM Proceedings PRO ; 75)},
  booktitle = {Textile reinforced concrete : 2nd ICTRC : International RILEM Conference on Material Science : Aachen Germany, September 6 - 8, 2010. Vol. 1. (RILEM Proceedings PRO ; 75)},
  editor    = {Brameshuber, Wolfgang},
  publisher = {RILEM Publ.},
  address   = {Bagneux},
  organization    = {International Conference of Textile Reinforced Concrete <2, 2010, Aachen>},
  isbn      = {978-2-35158-106-3},
  pages     = {153 -- 162},
  year      = {2010},
  language  = {en}
}
@inproceedings{SchoeneReisgenSchleseretal.2010,
  author    = {Schoene, Jens and Reisgen, Uwe and Schleser, Markus and Jerabek, Jakub and Chudoba, Rostislav},
  title     = {Theoretical and experimental investigations on textile-reinforced concrete spalling behavior},
  series = {8th International PhD Symposium in Civil Engineering : Lyngby, June 20-23, 2010 : proceedings},
  booktitle = {8th International PhD Symposium in Civil Engineering : Lyngby, June 20-23, 2010 : proceedings},
  editor    = {Fisher, Gregor},
  publisher = {Technical University of Denmark, Dept. of Civil Engineering},
  address   = {Lyngby},
  organization    = {PhD Symposium in Civil Engineering <8, 2010, Lyngby> ; International Federation for Structural Concrete},
  isbn      = {9788778773012},
  pages     = {383 -- 388},
  year      = {2010},
  language  = {en}
}
@article{KaemperPicardBrilletal.2003,
  author    = {K{\"a}mper, Klaus-Peter and Picard, Antoni and Brill, Manfred and Cassel, Detlef (u.a.)},
  title     = {The Virtual Cleanroom - a new tool in teaching MST process technologies},
  series = {mst news International newsletter on micro - nano Integration (2003)},
  journal   = {mst news International newsletter on micro - nano Integration (2003)},
  isbn      = {0948-3128},
  pages     = {35 -- 36},
  year      = {2003},
  language  = {en}
}
@article{KaemperPicardBrilletal.2003,
  author    = {K{\"a}mper, Klaus-Peter and Picard, Antoni and Brill, Manfred and Cassel, Detlev and Jentsch, Andreas and Merten, Sabine and Rollwa, Markus},
  title     = {The Virtual Clean Room - a new tool in teaching MST process technologies},
  year      = {2003},
  abstract  = {The Virtual Clean Room - a new tool in teaching MST process technologies University education in high-technology fields like MST is not complete without intensive laboratory sessions. Students cannot fully grasp the complexity and the special problems related to the manufacturing of microsystems without a thorough hands-on experience in a MST clean room.},
  subject      = {Virtuelle Maschine},
  language  = {en}
}
@inproceedings{FerreinSchifferKallweit2018,
  author    = {Ferrein, Alexander and Schiffer, Stefan and Kallweit, Stephan},
  title     = {The ROSIN Education Concept - Fostering ROS Industrial-Related Robotics Education in Europe},
  series = {ROBOT 2017: Third Iberian Robotics Conference},
  booktitle = {ROBOT 2017: Third Iberian Robotics Conference},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-319-70836-2},
  doi       = {10.1007/978-3-319-70836-2_31},
  pages     = {370 -- 381},
  year      = {2018},
  language  = {en}
}
@inproceedings{SchleupenEngemannBagherietal.2016,
  author    = {Schleupen, Josef and Engemann, Heiko and Bagheri, Mohsen and Kallweit, Stephan},
  title     = {The potential of SMART climbing robot combined with a weatherproof cabin for rotor blade maintenance},
  series = {17th European Conference on Composite Materials - ECCM, Munich, Germany},
  booktitle = {17th European Conference on Composite Materials - ECCM, Munich, Germany},
  pages     = {1 -- 8},
  year      = {2016},
  language  = {en}
}
@inproceedings{Wollert2012,
  author    = {Wollert, J{\"o}rg},
  title     = {The performance of UWB-communication in an industrial environment},
  series = {IEEE 1st International Symposium on Wireless Systems : (IDAACS-SWS) : Offenburg, 20-21 Sept. 2012},
  booktitle = {IEEE 1st International Symposium on Wireless Systems : (IDAACS-SWS) : Offenburg, 20-21 Sept. 2012},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  organization    = {International Symposium on Wireless Systems <1, 2012, Offenburg>},
  isbn      = {978-1-4673-4678-8},
  doi       = {10.1109/IDAACS-SWS.2012.6377639},
  pages     = {85 -- 90},
  year      = {2012},
  language  = {en}
}
@article{HanrathPlesken1984,
  author    = {Hanrath, Wilhelm and Plesken, Wilhelm},
  title     = {The lattices of six-dimensional euclidean space},
  series = {Mathematics of computation. 43 (1984), H. 168},
  journal   = {Mathematics of computation. 43 (1984), H. 168},
  isbn      = {0025-5718},
  pages     = {573 -- 587},
  year      = {1984},
  language  = {en}
}
@inproceedings{WalkLaufferRaupachDilgeretal.2004,
  author    = {Walk-Lauffer, Bernd and Raupach, Michael and Dilger, Klaus and B{\"o}hm, Stefan and Mundt, F. and Dilthey, Ulrich and Schleser, Markus},
  title     = {The interconnection between inner filaments of textile reinforcement by means of polymer modified concrete},
  series = {Proceedings of the First International Conference on Innovative Materials and Technologies for Construction and Restoration : : Lecce, June 6 - 9, 2004 / Universit{\`a} degli Studi di Lecce / ed. Antonio La Tegola. Vol. 1: Key-notes, materials, construction},
  booktitle = {Proceedings of the First International Conference on Innovative Materials and Technologies for Construction and Restoration : : Lecce, June 6 - 9, 2004 / Universit{\`a} degli Studi di Lecce / ed. Antonio La Tegola. Vol. 1: Key-notes, materials, construction},
  publisher = {Liguori},
  address   = {Napoli},
  pages     = {150 -- 159},
  year      = {2004},
  language  = {en}
}
@article{PancContiuBocanetetal.2019,
  author    = {Panc, Nicolae and Contiu, Glad and Bocanet, Vlad and Thurn, Laura and Sabau, Emilia},
  title     = {The influence of cutting technology on surface wear hardness},
  series = {Academic Journal of Manufacturing Engineering},
  volume    = {17},
  journal   = {Academic Journal of Manufacturing Engineering},
  number    = {3},
  issn      = {1583-7904},
  pages     = {205 -- 210},
  year      = {2019},
  language  = {en}
}
@article{KaemperSchmittGuentherodt1987,
  author    = {K{\"a}mper, Klaus-Peter and Schmitt, W. and G{\"u}ntherodt, G.},
  title     = {The influence of adsorbates on the spin-resolved photoemission of Ni(110). Schmitt, W.; K{\"a}mper, K.-P.; G{\"u}ntherodt, G.},
  series = {Surface Science. 189/190 (1987)},
  journal   = {Surface Science. 189/190 (1987)},
  isbn      = {0039-6028},
  pages     = {741 -- 507},
  year      = {1987},
  language  = {en}
}
@inproceedings{ShahidiPfaffEnning2017,
  author    = {Shahidi, Parham and Pfaff, Raphael and Enning, Manfred},
  title     = {The connected wagon - a concept for the integration of vehicle side sensors and actors with cyber physical representation for condition based maintenance},
  series = {First International Conference on Rail Transportation},
  booktitle = {First International Conference on Rail Transportation},
  pages     = {1 -- 8},
  year      = {2017},
  language  = {en}
}
@inproceedings{VedralWollertBudaetal.2006,
  author    = {Vedral, Andreas and Wollert, J{\"o}rg and Buda, A. and Altrock, R.},
  title     = {The capability of bluetooth for real-time transmission in automation},
  series = {Proceedings of the IASTED International Conference on Networks and Communication Systems 2006 : March 29 - 31, 2006, Chiang Mai, Thailand},
  booktitle = {Proceedings of the IASTED International Conference on Networks and Communication Systems 2006 : March 29 - 31, 2006, Chiang Mai, Thailand},
  publisher = {Acta Pr.},
  address   = {Anaheim, Calif.},
  organization    = {International Association of Science and Technology for Development},
  pages     = {168 -- 175},
  year      = {2006},
  language  = {en}
}
@article{FrohbergAnik1985,
  author    = {Frohberg, Martin G. and Anik, Sabri},
  title     = {The calculation of component activities of binary metallic melts from their gas solubilities},
  series = {Zeitschrift f{\"u}r Metallkunde},
  volume    = {76},
  journal   = {Zeitschrift f{\"u}r Metallkunde},
  number    = {2},
  issn      = {0044-3093},
  pages     = {135 -- 137},
  year      = {1985},
  language  = {en}
}
@article{FrohbergAnik1983,
  author    = {Frohberg, Martin G. and Anik, Sabri},
  title     = {The application of a quadi-chemical lattice model to binary metallic solvents containing oxygen in higher concentrations},
  series = {Zeitschrift f{\"u}r Metallkunde},
  volume    = {74},
  journal   = {Zeitschrift f{\"u}r Metallkunde},
  number    = {10},
  issn      = {0044-3093},
  pages     = {665 -- 666},
  year      = {1983},
  language  = {en}
}
@article{KaemperSchmittGuentherodt1988,
  author    = {K{\"a}mper, Klaus-Peter and Schmitt, W. and G{\"u}ntherodt, G.},
  title     = {Temperature dependence of the exchange splitting of Ni along the \&\#61511;-L line},
  series = {Journal de physique. 49 (1988), H. 12. Supplement, Colloque C8},
  journal   = {Journal de physique. 49 (1988), H. 12. Supplement, Colloque C8},
  pages     = {39 -- 40},
  year      = {1988},
  language  = {en}
}
@article{KaemperSchmittGuentherodt1990,
  author    = {K{\"a}mper, Klaus-Peter and Schmitt, W. and G{\"u}ntherodt, G.},
  title     = {Temperature and wave-vector dependence of the spin-split band structure of Ni(111) along the \&\#915;-L line},
  series = {Physical Review B. 42 (1990), H. 16},
  journal   = {Physical Review B. 42 (1990), H. 16},
  isbn      = {1095-3795},
  pages     = {10696 -- 10705},
  year      = {1990},
  language  = {en}
}
@inproceedings{Gebhardt2006,
  author    = {Gebhardt, Andreas},
  title     = {Technology Diffusion through a Multi-Level Technology Transfer Infrastructure. Contribution to the 1st. All Africa Technology Diffusion Conference Boksburg, South Africa June 12th - 14th 2006},
  year      = {2006},
  abstract  = {Table of contents 1. Introduction 2. Multi-level Technology Transfer Infrastructure 2.1 Level 1: University Education - Encourage the Idea of becoming an Entrepreneur 2.2 Level 2: Post Graduate Education - Improve your skills and focus it on a product family. 2.3 Level 3: Birth of a Company - Focus your skills on a product and a market segment. 2.4 Level 4: Ready to stand alone - Set up your own business 2.5 Level 5: Grow to be Strong - Develop your business 2.6 Level 6: Competitive and independent - Stay innovative. 3. Samples 3.1 Sample 1: Laser Processing and Consulting Centre, LBBZ 3.2 Sample 2: Prototyping Centre, CP 4. Funding - Waste money or even lost Money? 5. Conclusion},
  subject      = {Technologietransfer},
  language  = {en}
}
@inproceedings{Wollert2008,
  author    = {Wollert, J{\"o}rg},
  title     = {Technologischer {\"U}berblick - welches ist die richtige kabellose Technologie? Grenzen und M{\"o}glichkeiten der Funk{\"u}bertragung sowie der konkreten Nutzung verschiedener Technolgien},
  series = {Wireless-Technologies-Kongress 2008 : von der Technologie zur Anwendung / Hrsg. J{\"o}rg F. Wollert},
  booktitle = {Wireless-Technologies-Kongress 2008 : von der Technologie zur Anwendung / Hrsg. J{\"o}rg F. Wollert},
  publisher = {AKA},
  address   = {Heidelberg},
  organization    = {Wireless-Technologies-Kongress <10, 2008, Bochum>},
  isbn      = {978-3-89838-608-1},
  pages     = {349},
  year      = {2008},
  language  = {de}
}
@article{Thomas2018,
  author    = {Thomas, Axel},
  title     = {Technologiezentren in der Aachener Region - Retrospektiven und Perspektiven},
  series = {VM Verwaltung und Management},
  volume    = {24},
  journal   = {VM Verwaltung und Management},
  number    = {3},
  publisher = {Nomos},
  address   = {Baden-Baden},
  issn      = {0947-9856},
  doi       = {10.5771/0947-9856-2018-3-147},
  pages     = {147 -- 156},
  year      = {2018},
  language  = {de}
}
@inproceedings{GabrielliSeelmannGrossmannetal.2015,
  author    = {Gabrielli, Roland Antonius and Seelmann, J{\"u}rgen and Großmann, Agnes and Herdrich, Georg and Fasoulas, Stefanos and Middendorf, Peter and Fateri, Miranda and Gebhardt, Andreas},
  title     = {System Architecture of a Lunar Industry Plant Using Regolith},
  series = {Conference Contribution for the 30th ISTS, Kobe, Japan, 04.07.-10.07.2015},
  booktitle = {Conference Contribution for the 30th ISTS, Kobe, Japan, 04.07.-10.07.2015},
  pages     = {8 S.},
  year      = {2015},
  language  = {de}
}
@inproceedings{BraunChengDoweyetal.2020,
  author    = {Braun, Sebastian and Cheng, Chi-Tsun and Dowey, Steve and Wollert, J{\"o}rg},
  title     = {Survey on Security Concepts to Adapt Flexible Manufacturing and Operations Management based upon Multi-Agent Systems},
  series = {2020 IEEE 29th International Symposium on Industrial Electronics (ISIE)},
  booktitle = {2020 IEEE 29th International Symposium on Industrial Electronics (ISIE)},
  doi       = {10.1109/ISIE45063.2020.9152210},
  year      = {2020},
  language  = {en}
}
@article{Klocke1995,
  author    = {Klocke, Martina},
  title     = {Study Units in the CIM-Oriented Study Factory},
  series = {Qualification for Computer-Integrated Manufacturing. Hrsg.: Felix Rauner},
  journal   = {Qualification for Computer-Integrated Manufacturing. Hrsg.: Felix Rauner},
  publisher = {Springer},
  address   = {Berlin [u.a.]},
  isbn      = {3-540-19971-3},
  pages     = {38 -- 51},
  year      = {1995},
  language  = {en}
}
@book{BaatzSanderLanghoff1996,
  author    = {Baatz, Udo and Sander, Ralf and Langhoff, R.},
  title     = {Studienf{\"u}hrer f{\"u}r der Fachbereich 8 Maschinenbau FH Aachen},
  publisher = {Stercken-Verl.},
  address   = {Aachen},
  year      = {1996},
  language  = {de}
}
@article{HennPolaczek2007,
  author    = {Henn, Gudrun and Polaczek, Christa},
  title     = {Studienerfolg in den Ingenieurwissenschaften},
  series = {Das Hochschulwesen : HSW ; Forum f{\"u}r Hochschulforschung, -praxis und -politik},
  volume    = {55},
  journal   = {Das Hochschulwesen : HSW ; Forum f{\"u}r Hochschulforschung, -praxis und -politik},
  number    = {5},
  issn      = {0018-2974},
  pages     = {144 -- 147},
  year      = {2007},
  language  = {de}
}
@inproceedings{PfeifferBalcGebhardt2021,
  author    = {Pfeiffer, Johann and Balc, N. and Gebhardt, Andreas},
  title     = {Studie zur Untersuchung der Auswirkung von Fr{\"a}sbahnstrategien auf die Oberfl{\"a}chenqualit{\"a}t von mittels SLM gefertigten Metallteilen},
  series = {Tagungsband 21. Nachwuchswissenschaftler*innenkonferenz},
  booktitle = {Tagungsband 21. Nachwuchswissenschaftler*innenkonferenz},
  publisher = {Verlag Ernst-Abbe-Hochschule Jena},
  address   = {Jena},
  isbn      = {978-3-932886-36-2},
  pages     = {99 -- 102},
  year      = {2021},
  abstract  = {F{\"u}r die Herstellung von metallischen Bauteilen wird in der heutigen Zeit eine Vielzahl von Verfahren auf dem Markt angeboten. Dabei stehen die additiven im Wettbewerb zu den konventionellen Verfahren. Die erreichbaren Oberfl{\"a}chenqualit{\"a}ten der additiven sind nicht mit denen spanender Verfahren vergleichbar. F{\"u}r diesen Beitrag wurde analysiert, ob sich ein mittels Selektivem Laserschmelzen (SLM) additiv hergestellter Edelstahl hinsichtlich seiner Oberfl{\"a}chenqualit{\"a}t nach der Zerspanung von einem umgeformten konventionell hergestellten Edelstahl gleicher Sorte unterscheidet.},
  language  = {de}
}
@article{WilbringEnning2019,
  author    = {Wilbring, Daniela and Enning, Manfred},
  title     = {Stromversorgung auf G{\"u}terwagen - Aktuelle Bem{\"u}hungen zur Standardisierung},
  series = {ETR - Eisenbahntechnische Rundschau},
  volume    = {68},
  journal   = {ETR - Eisenbahntechnische Rundschau},
  number    = {11},
  publisher = {DVV Media Group},
  address   = {Hamburg},
  issn      = {0013-2845},
  pages     = {64 -- 67},
  year      = {2019},
  language  = {de}
}
@inproceedings{ThurnGebhardt2018,
  author    = {Thurn, Laura and Gebhardt, Andreas},
  title     = {Strategy of Education on Materials for Students},
  series = {Conference Proceedings: „New Perspectives in Science Education"},
  booktitle = {Conference Proceedings: „New Perspectives in Science Education"},
  address   = {Florence, Italy},
  isbn      = {978-88-6292-976-9},
  pages     = {156 -- 161},
  year      = {2018},
  language  = {en}
}
@article{Heinrichs1992,
  author    = {Heinrichs, Horst},
  title     = {STEP bietet mehr},
  publisher = {IKOSS},
  address   = {Stuttgart},
  pages     = {327 -- 344},
  year      = {1992},
  language  = {de}
}
@article{ReisgenSchleserMokrovetal.2012,
  author    = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Ahmed, Essam},
  title     = {Statistical modeling of laser welding of DP/TRIP steel sheets},
  series = {Optics and laser technology},
  volume    = {44},
  journal   = {Optics and laser technology},
  number    = {1},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1879-2545 (E-Journal); 0030-3992 (Print); 0308-4280 (Print)},
  doi       = {10.1016/j.optlastec.2011.05.025},
  pages     = {92 -- 101},
  year      = {2012},
  abstract  = {In this research work, a statistical analysis of the CO2 laser beam welding of dual phase (DP600)/transformation induced plasticity (TRIP700) steel sheets was done using response surface methodology. The analysis considered the effect of laser power (2-2.2 kW), welding speed (40-50 mm/s) and focus position (-1 to 0 mm) on the heat input, the weld bead geometry, uniaxial tensile strength, formability limited dome height and welding operation cost. The experimental design was based on Box-Behnken design using linear and quadratic polynomial equations for predicting the mathematical models. The results indicate that the proposed models predict the responses adequately within the limits of welding parameters being used and the welding speed is the most significant parameter during the welding process.},
  language  = {en}
}
@article{KunkelGebhardtMpofuetal.2018,
  author    = {Kunkel, Maximilian Hugo and Gebhardt, Andreas and Mpofu, Khumbaulani and Kallweit, Stephan},
  title     = {Statistical assessment of mechanical properties of selective laser melted specimens of stainless steel},
  series = {The International Journal of Advanced Manufacturing Technology},
  volume    = {98},
  journal   = {The International Journal of Advanced Manufacturing Technology},
  number    = {5-8},
  publisher = {Springer},
  address   = {London},
  issn      = {0268-3768},
  doi       = {10.1007/s00170-018-2040-8},
  pages     = {1409 -- 1431},
  year      = {2018},
  abstract  = {The rail business is challenged by long product life cycles and a broad spectrum of assembly groups and single parts. When spare part obsolescence occurs, quick solutions are needed. A reproduction of obsolete parts is often connected to long waiting times and minimum lot quantities that need to be purchased and stored. Spare part storage is therefore challenged by growing stocks, bound capital and issues of part ageing. A possible solution could be a virtual storage of spare parts which will be 3D printed through additive manufacturing technologies in case of sudden demand. As mechanical properties of additive manufactured parts are neither guaranteed by machine manufacturers nor by service providers, the utilization of this relatively young technology is impeded and research is required to address these issues. This paper presents an examination of mechanical properties of specimens manufactured from stainless steel through the selective laser melting (SLM) process. The specimens were produced in multiple batches. This paper interrogates the question if the test results follow a normal distribution pattern and if mechanical property predictions can be made. The results will be put opposite existing threshold values provided as the industrial standard. Furthermore, probability predictions will be made in order to examine the potential of the SLM process to maintain state-of-the-art mechanical property requirements.},
  language  = {en}
}
@book{Knepper2000,
  author    = {Knepper, Ludger},
  title     = {Staplereinsatzkonzept Rohstofflagerplatz einer Papierfabrik},
  address   = {FH Aachen},
  year      = {2000},
  language  = {de}
}
@article{StarkeDrews1984,
  author    = {Starke, G{\"u}nther and Drews, P.},
  title     = {Stand der Sensorentwicklung fuer Schutzgasschweissroboter},
  series = {Schweissen und Schneiden. 36 (1984), H. 4},
  journal   = {Schweissen und Schneiden. 36 (1984), H. 4},
  isbn      = {0036-7184},
  pages     = {166 -- 172},
  year      = {1984},
  language  = {de}
}
@article{AnikAnik1991,
  author    = {Anik, Sabri and Anik, Salahaddin},
  title     = {Stand der Schweißtechnik in der T{\"u}rkei},
  series = {Schweißen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren},
  volume    = {43},
  journal   = {Schweißen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren},
  number    = {3},
  issn      = {0036-7184},
  pages     = {142 -- 145},
  year      = {1991},
  language  = {de}
}
@inproceedings{SeilerGeorgePfaffetal.2005,
  author    = {Seiler, Friedrich and George, Alfred and Pfaff, Raphael and Srulijes, Julio},
  title     = {Stand der Entwicklung des ISL Dopplerbildverfahrens},
  series = {GALA : 13. Fachtagung Lasermethoden in der Str{\"o}mungsmesstechnik : 6. - 8. September 2005, Cottbus},
  booktitle = {GALA : 13. Fachtagung Lasermethoden in der Str{\"o}mungsmesstechnik : 6. - 8. September 2005, Cottbus},
  publisher = {Techn. Univ.},
  address   = {Cottbus},
  organization    = {Fachtagung Lasermethoden in der Str{\"o}mungsmesstechnik <13, 2005, Cottbus>},
  isbn      = {3-9805613-2-1},
  pages     = {24-1 -- 24-8},
  year      = {2005},
  language  = {de}
}
@article{Gartzen2011,
  author    = {Gartzen, Johannes},
  title     = {Sp{\"a}tes Aufwachen aus dem Dornr{\"o}schenschlaf: Ohne Energie l{\"a}uft nichts},
  series = {Aachener Nachrichten (2011)},
  journal   = {Aachener Nachrichten (2011)},
  publisher = {Zeitungsverl. Aachen},
  address   = {Aachen},
  pages     = {22},
  year      = {2011},
  language  = {de}
}
@article{KaemperKurzawaSchmittetal.1986,
  author    = {K{\"a}mper, Klaus-Peter and Kurzawa, R. and Schmitt, W. and G{\"u}ntherodt, G.},
  title     = {Spin-resolved photoemission study of in situ grown epitaxial Fe layers on W(110). Kurzawa, R.; K{\"a}mper, K.-P.; Schmitt, W.; G{\"u}ntherodt, G.},
  series = {Solid State Communications. 60 (1986), H. 10},
  journal   = {Solid State Communications. 60 (1986), H. 10},
  isbn      = {0038-1098},
  pages     = {777 -- 780},
  year      = {1986},
  language  = {en}
}
@article{KaemperAbrahamHopster1992,
  author    = {K{\"a}mper, Klaus-Peter and Abraham, D. L. and Hopster, H.},
  title     = {Spin-polarized electron-energy-loss spectroscopy on epitaxial fcc Co layers on Cu(001)},
  series = {Physical Review B. 45 (1992), H. 24},
  journal   = {Physical Review B. 45 (1992), H. 24},
  isbn      = {1095-3795},
  pages     = {14335 -- 14346},
  year      = {1992},
  language  = {en}
}
@article{KaemperPappasMilleretal.1991,
  author    = {K{\"a}mper, Klaus-Peter and Pappas, D. P. and Miller, B. P. and Hopster, H.},
  title     = {Spin-dependent electron attenuation by transmission through thin ferromagnetic films . Pappas, D. P.; K{\"a}mper,K.-P.; Miller, B. P.; Hopster, H.; Fowler, D. E.; Brundle, C. R.; Luntz, A. C.; Shen, Z.-X.},
  series = {Physical Review Letters. 66 (1991), H. 4},
  journal   = {Physical Review Letters. 66 (1991), H. 4},
  isbn      = {1079-7114},
  pages     = {504 -- 507},
  year      = {1991},
  language  = {en}
}
@article{KallweitDuesSiekmann1994,
  author    = {Kallweit, Stephan and Dues, M. W. and Siekmann, H. E.},
  title     = {Spectral Analysis of Pressure Fluctuations and Velocity Fields as Investigated on Propeller Pumps / Dues, M. W. ; Kallweit, S. D. ; Siekmann, H. E.},
  series = {Preprints : Fifth International Symposium on Transport Phenomena and Dynamics of Rotating Machinery (ISROMAC-5) : May 8 - 11, 1994, Maui Marriott Hotel, Kaanapali, Maui, Hawaii, U.S.A / sponsored by Pacific Center of Thermal-Fluids Engineering. [W.-J. Yang, chairman] / Vol. B.},
  journal   = {Preprints : Fifth International Symposium on Transport Phenomena and Dynamics of Rotating Machinery (ISROMAC-5) : May 8 - 11, 1994, Maui Marriott Hotel, Kaanapali, Maui, Hawaii, U.S.A / sponsored by Pacific Center of Thermal-Fluids Engineering. [W.-J. Yang, chairman] / Vol. B.},
  pages     = {98 -- 112},
  year      = {1994},
  language  = {en}
}
@inproceedings{GabrielliMathiesGrossmannetal.2015,
  author    = {Gabrielli, Roland Antonius and Mathies, Johannes and Großmann, Agnes and Herdrich, Georg and Fasoulas, Stefanos and Middendorf, Peter and Fateri, Miranda and Gebhardt, Andreas},
  title     = {Space Propulsion Considerations for a Lunar Take Off Industry Based on Regolith},
  series = {International Symposium on Space Technology and Science (ISTS). July 2015, Kobe, Japan},
  booktitle = {International Symposium on Space Technology and Science (ISTS). July 2015, Kobe, Japan},
  year      = {2015},
  language  = {en}
}
@inproceedings{KaschSchmidtEichleretal.2020,
  author    = {Kasch, Susanne and Schmidt, Thomas and Eichler, Fabian and Thurn, Laura and Jahn, Simon and Bremen, Sebastian},
  title     = {Solution approaches and process concepts for powder bed-based melting of glass},
  series = {Industrializing Additive Manufacturing. Proceedings of AMPA2020},
  booktitle = {Industrializing Additive Manufacturing. Proceedings of AMPA2020},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-54333-4 (Print)},
  doi       = {10.1007/978-3-030-54334-1_7},
  pages     = {82 -- 95},
  year      = {2020},
  abstract  = {In the study, the process chain of additive manufacturing by means of powder bed fusion will be presented based on the material glass. In order to reliably process components additively, new concepts with different solutions were developed and investigated. Compared to established metallic materials, the properties of glass materials differ significantly. Therefore, the process control was adapted to the material glass in the investigations. With extensive parameter studies based on various glass powders such as borosilicate glass and quartz glass, scientifically proven results on powder bed fusion of glass are presented. Based on the determination of the particle properties with different methods, extensive investigations are made regarding the melting behavior of glass by means of laser beams. Furthermore, the experimental setup was steadily expanded. In addition to the integration of coaxial temperature measurement and regulation, preheating of the building platform is of major importance. This offers the possibility to perform 3D printing at the transformation temperatures of the glass materials. To improve the component's properties, the influence of a subsequent heat treatment was also investigated. The experience gained was incorporated into a new experimental system, which allows a much better exploration of the 3D printing of glass. Currently, studies are being conducted to improve surface texture, building accuracy, and geometrical capabilities using three-dimensional specimen. The contribution shows the development of research in the field of 3D printing of glass, gives an insight into the machine and process engineering as well as an outlook on the possibilities and applications.},
  language  = {en}
}
@article{Wollert2005,
  author    = {Wollert, J{\"o}rg},
  title     = {Softwaretrends in der Automatisierungstechnik},
  series = {Etz : Elektrotechnik \& Automation ; Organ des VDE Verband der Elektrotechnik Elektronik Informationstechnik e.V. und der Energietechnischen Gesellschaft im VDE (ETG) und der VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA)},
  volume    = {126},
  journal   = {Etz : Elektrotechnik \& Automation ; Organ des VDE Verband der Elektrotechnik Elektronik Informationstechnik e.V. und der Energietechnischen Gesellschaft im VDE (ETG) und der VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA)},
  number    = {S2},
  issn      = {0948-7387},
  pages     = {74 -- 79},
  year      = {2005},
  language  = {de}
}
@article{BarthWollert1998,
  author    = {Barth, Heiko and Wollert, J{\"o}rg},
  title     = {SMARTes Konzept - von Produkt zur Fabrik},
  series = {Facility-Management : Integration, Planung, Geb{\"a}udemanagement},
  volume    = {Bd. 4},
  journal   = {Facility-Management : Integration, Planung, Geb{\"a}udemanagement},
  number    = {H. August},
  issn      = {0948-0048},
  pages     = {30 -- 35},
  year      = {1998},
  language  = {de}
}
@misc{Kaemper2007,
  author    = {K{\"a}mper, Klaus-Peter},
  title     = {Skript zur Vorlesung Mikrotechnik 1},
  year      = {2007},
  abstract  = {Kennwortgesch{\"u}tzter Zugang nur f{\"u}r Studierende bei Prof. Dr. Klaus-Peter K{\"a}mper. Sommersemester 2007. Version 2.3 vom 27.02.2007 I-8, 484 S.: Ill.; graph. Darst. Inhaltsverzeichnis: 1 Einf{\"u}hrung: Was ist Mikrotechnik? 2 Fertigung im Reinraum 3 Der Werkstoff Silizium 4 D{\"u}nnschichttechnologie 5 Photolithographie 6 {\"A}tztechnologie 7 „Bulk Micromachining" 8 „Surface Micromachining" 9 Trocken{\"a}tzen tiefer Mikrostrukturen 10 LIGA-Technik 11 Mikrofunkenerosion 12 Laser in der Mikrotechnik 13 Mechanische Mikrofertigung 14 Photostruktuierbares Glas 15 Aufbau- und Verbindungstechnik},
  subject      = {Mikrosystemtechnik},
  language  = {de}
}
@inproceedings{ReisgenSchleserMokrovetal.2012,
  author    = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Schmidt, Andre},
  title     = {SimWeld - 10 Jahre Schweißprozesssimulation im ISF},
  series = {Entwicklung und Evolution von Forschungssoftware : Tagungsband des Workshops, Rolduc, November 2011. (Aachener Informatik-Berichte, Software-Engineering ; Bd. 14)},
  booktitle = {Entwicklung und Evolution von Forschungssoftware : Tagungsband des Workshops, Rolduc, November 2011. (Aachener Informatik-Berichte, Software-Engineering ; Bd. 14)},
  editor    = {Rumpe, Bernhard and Lichter, Horst},
  publisher = {Shaker},
  address   = {Aachen},
  isbn      = {978-3-8440-1600-0},
  pages     = {55 -- 62},
  year      = {2012},
  language  = {de}
}
@article{StarkeZackFriedrichetal.2003,
  author    = {Starke, G{\"u}nther and Zack, Y. and Friedrich, A.-P. and Drichel, E.},
  title     = {Simulationswerkzeug bei der Herstellung von mikroelektronischen Komponenten. Schnelles Beurteilen von Alternativen in der Produktionsplanung und im Fertigungsdesign},
  series = {FB/IE - Zeitschrift f{\"u}r Unternehmensentwicklung und Industrial Engineering. 52 (2003), H. 5},
  journal   = {FB/IE - Zeitschrift f{\"u}r Unternehmensentwicklung und Industrial Engineering. 52 (2003), H. 5},
  isbn      = {1431-2271},
  pages     = {204 -- 212},
  year      = {2003},
  language  = {de}
}
@article{Knepper1996,
  author    = {Knepper, Ludger},
  title     = {Simulation: Vom reinen Planungswerkzeug zum Betriebsf{\"u}hrungs-Instrument},
  series = {Foerdern und Heben. 46 (1996), H. 3},
  journal   = {Foerdern und Heben. 46 (1996), H. 3},
  isbn      = {0341-2636},
  pages     = {158 -- 160},
  year      = {1996},
  language  = {de}
}
@inproceedings{UlmerBraunChengetal.2020,
  author    = {Ulmer, Jessica and Braun, Sebastian and Cheng, Chi-Tsun and Dowey, Steve and Wollert, J{\"o}rg},
  title     = {Simulation und Verifikation komplexer Handarbeitsprozesse durch die Kombination von Virtual Reality und Augmented Reality im Single-Piece-Workflow},
  series = {AALE 2020, 17. Fachkonferenz Angewandte Automatisierungstechnik in Lehre und Entwicklung, Automatisierung und Mensch-Technik-Interaktion, Leipzig, DE, 4.-6.3.2020},
  booktitle = {AALE 2020, 17. Fachkonferenz Angewandte Automatisierungstechnik in Lehre und Entwicklung, Automatisierung und Mensch-Technik-Interaktion, Leipzig, DE, 4.-6.3.2020},
  isbn      = {978-3-8007-5180-8},
  pages     = {1 -- 4},
  year      = {2020},
  language  = {de}
}
@article{KaemperDoepperEhrfeldetal.1995,
  author    = {K{\"a}mper, Klaus-Peter and D{\"o}pper, J. and Ehrfeld, W. and Hagemann, B.},
  title     = {Simulation supported design of LIGA Microsystems. K{\"a}mper, K.-P.; D{\"o}pper, J.; Ehrfeld, W.; Hagemann, B.; Hill, S.D.J.; Lehr, H.},
  series = {Simulation and design of microsystems and microstructures : [... contains the papers presented at the First International Conference on the Simulation and Design of Microsystems and Microstructures, MicroSIM '95, which was held in Southampton, UK, in September 1995] / [organised by: Wessex Institute of Technology, UK]. Ed.: R. A. Adey},
  journal   = {Simulation and design of microsystems and microstructures : [... contains the papers presented at the First International Conference on the Simulation and Design of Microsystems and Microstructures, MicroSIM '95, which was held in Southampton, UK, in September 1995] / [organised by: Wessex Institute of Technology, UK]. Ed.: R. A. Adey},
  publisher = {Computational Mechanics Publ.},
  address   = {Southampton [u.a.]},
  isbn      = {1-85312-390-0},
  pages     = {3 -- 10},
  year      = {1995},
  language  = {en}
}
@incollection{FrotscherGossmannRaatschenetal.2015,
  author    = {Frotscher, Ralf and Goßmann, Matthias and Raatschen, Hans-J{\"u}rgen and Temiz Artmann, Ayseg{\"u}l and Staat, Manfred},
  title     = {Simulation of cardiac cell-seeded membranes using the edge-based smoothed FEM},
  series = {Shell and membrane theories in mechanics and biology. (Advanced structured materials ; 45)},
  booktitle = {Shell and membrane theories in mechanics and biology. (Advanced structured materials ; 45)},
  publisher = {Springer},
  address   = {Heidelberg},
  isbn      = {978-3-319-02534-6 ; 978-3-319-02535-3},
  pages     = {187 -- 212},
  year      = {2015},
  abstract  = {We present an electromechanically coupled Finite Element model for cardiac tissue. It bases on the mechanical model for cardiac tissue of Hunter et al. that we couple to the McAllister-Noble-Tsien electrophysiological model of purkinje fibre cells. The corresponding system of ordinary differential equations is implemented on the level of the constitutive equations in a geometrically and physically nonlinear version of the so-called edge-based smoothed FEM for plates. Mechanical material parameters are determined from our own pressure-deflection experimental setup. The main purpose of the model is to further examine the experimental results not only on mechanical but also on electrophysiological level down to ion channel gates. Moreover, we present first drug treatment simulations and validate the model with respect to the experiments.},
  language  = {en}
}
@inproceedings{ReisgenSchleserMokrovetal.2011,
  author    = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Zabirov, Alexander},
  title     = {Simulation des Tropfen{\"u}bergangs beim MSG-Impulslichtbogenschweißen},
  series = {Große Schweißtechnische Tagung 2011 : Studentenkongress 2011, Abschlusskolloquium Lichtbogenschweißen 2011; Vortr{\"a}ge der Veranstaltung in Hamburg},
  booktitle = {Große Schweißtechnische Tagung 2011 : Studentenkongress 2011, Abschlusskolloquium Lichtbogenschweißen 2011; Vortr{\"a}ge der Veranstaltung in Hamburg},
  publisher = {DVS-Media},
  address   = {D{\"u}sseldorf},
  organization    = {Deutscher Verband f{\"u}r Schweißen und Verwandte Verfahren ; Große Schweißtechnische Tagung <2011, Hamburg>},
  isbn      = {978-3-87155-267-0},
  pages     = {554 -- 559},
  year      = {2011},
  language  = {de}
}
@inproceedings{SchuermannLeidingerWollert2010,
  author    = {Sch{\"u}rmann, Volker and Leidinger, R. and Wollert, J{\"o}rg},
  title     = {Simplified rapid-prototyping with automation technology},
  series = {Automobiles and sustainable mobility : FISITA 2010 World Automotive Congress, 30 May - 4 June, Budapest, Hungary ; proceedings},
  booktitle = {Automobiles and sustainable mobility : FISITA 2010 World Automotive Congress, 30 May - 4 June, Budapest, Hungary ; proceedings},
  organization    = {FISITA 2010 World Automotive Congress <Budapest>},
  isbn      = {978-963-9058-29-3},
  pages     = {F2010C093},
  year      = {2010},
  language  = {en}
}
@inproceedings{Wollert2004,
  author    = {Wollert, J{\"o}rg},
  title     = {Sicherheit und Sicherheitsl{\"u}cken in kabellosen Automatisierungsnetzwerken : wieviel Sicherheit braucht ein Automatisierungsnetzwerk?},
  series = {Funkgest{\"u}tzte Kommunikation in der industriellen Automatisierungstechnik : Tagung D{\"u}sseldorf, 4. und 5. Mai 2004. (VDI-Berichte ; 1843)},
  booktitle = {Funkgest{\"u}tzte Kommunikation in der industriellen Automatisierungstechnik : Tagung D{\"u}sseldorf, 4. und 5. Mai 2004. (VDI-Berichte ; 1843)},
  publisher = {VDI-Verl.},
  address   = {D{\"u}sseldorf},
  isbn      = {3-18-091843-8},
  pages     = {91 -- 104},
  year      = {2004},
  language  = {de}
}
@inproceedings{Wollert2004,
  author    = {Wollert, J{\"o}rg},
  title     = {Sicherheit in kabellosen Netzwerken},
  series = {SPS/IPC/DRIVES 2004 : SPS/IPC/DRIVES, Elektrische Automatisierung - Systeme und Komponenten, Fachmesse \& Kongress, 23. - 25. Nov. 2004, N{\"u}rnberg},
  booktitle = {SPS/IPC/DRIVES 2004 : SPS/IPC/DRIVES, Elektrische Automatisierung - Systeme und Komponenten, Fachmesse \& Kongress, 23. - 25. Nov. 2004, N{\"u}rnberg},
  publisher = {Poing},
  address   = {Franzis},
  isbn      = {3-7723-6709-7},
  pages     = {335 -- 341},
  year      = {2004},
  language  = {de}
}
@misc{Gebhardt2005,
  author    = {Gebhardt, Andreas},
  title     = {Short course on rapid prototyping},
  year      = {2005},
  abstract  = {Rapid Prototyping Technology: Types of models, rapid prototyping processes, prototyper Fundamentals of rapid prototyping Industrial rapid prototyping technology: Stereolithography, (Selective) laser sintering ((S)LS), Layer laminate manufacturing (LLM), Fused layer modeling (FLM), Three dimensional printing (3DP)},
  language  = {en}
}
@article{ReisgenSchleserMokrovetal.2010,
  author    = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Ahmed, Essam},
  title     = {Shielding gas influences on laser weldability of tailored blanks of advanced automotive steels},
  series = {Applied surface science},
  volume    = {257},
  journal   = {Applied surface science},
  number    = {5},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0169-4332 (E-Journal); 0169-4332 (Print)},
  doi       = {10.1016/j.apsusc.2010.08.042},
  pages     = {1401 -- 1406},
  year      = {2010},
  abstract  = {The effects of shielding gas types and flow rates on CO2 laser weldability of DP600/TRIP700 steel sheets were studied in this work. The evaluated shielding gases were helium (He), argon (Ar) and different mixtures of He and Ar. Weld penetration, tensile strength and formability (Erichsen test) of laser welds were found to be strongly dependent upon the shielding gas types. The ability of shielding gas in removing plasma plume and thus increasing weld penetration is believed to be closely related to ionization potential and atomic weight which determine the period of plasma formation and disappearance. It was found that the higher helium shielding gas flow rate, the deeper weld penetration and the lower weld width.},
  language  = {en}
}
@inproceedings{QuadfliegSchoeneSchleseretal.2012,
  author    = {Quadflieg, Till and Schoene, Jens and Schleser, Markus and Jockenh{\"o}vel, Stefan and Reisgen, Uwe and Gries, Thomas},
  title     = {Shear connectors for hybrid joints of metal and FRP},
  series = {Diversity in composites : conference proceedings : Composites Australia and CRC-ACS 2012 conference},
  booktitle = {Diversity in composites : conference proceedings : Composites Australia and CRC-ACS 2012 conference},
  editor    = {Heslehurst, Rikard Benton},
  publisher = {Composites Australia},
  address   = {Hawthorne},
  isbn      = {978-0-9873285-0-2},
  pages     = {[152] -- [160]},
  year      = {2012},
  language  = {en}
}
@article{GebhardtMatharPlum1994,
  author    = {Gebhardt, Andreas and Mathar, W. and Plum, H.-D.},
  title     = {SFM-System Stereolithographie und selektives Lasersintern im Vergleich},
  pages     = {85 -- 95},
  year      = {1994},
  language  = {de}
}
@inproceedings{VedralWollert2005,
  author    = {Vedral, Andreas and Wollert, J{\"o}rg},
  title     = {Service based Bluetooth dual-hop networks using CORBA},
  series = {Proceedings of the IASTED International Conference on Artificial Intelligence and Applications : as part of the 23rd IASTED International Multi-Conference on Applied Informatics ; February 14 - 16, 2005, Innsbruck, Austria},
  booktitle = {Proceedings of the IASTED International Conference on Artificial Intelligence and Applications : as part of the 23rd IASTED International Multi-Conference on Applied Informatics ; February 14 - 16, 2005, Innsbruck, Austria},
  publisher = {Acta Pr.},
  address   = {Anaheim, Calif.},
  organization    = {International Conference on Artificial Intelligence and Applications <2005, Innsbruck> ; International Multi-Conference on Applied Informatics <23, 2005, Innsbruck>},
  isbn      = {0-88986-457-8},
  pages     = {724 -- 728},
  year      = {2005},
  language  = {en}
}
@article{KaemperBergBegemannetal.1998,
  author    = {K{\"a}mper, Klaus-Peter and Berg, U. and Begemann, M. and Hagemann, B. (u.a.)},
  title     = {Series production and testing of a micro motor. Serienfertigung und Pr{\"u}fung eines Mikromotors},
  series = {Actuator 98 : 6th International Conference on New Actuators ; 17 - 19 June, 1998, Bremen, Germany ; conference proceedings / ed.: Hubert Borgmann ...},
  journal   = {Actuator 98 : 6th International Conference on New Actuators ; 17 - 19 June, 1998, Bremen, Germany ; conference proceedings / ed.: Hubert Borgmann ...},
  publisher = {Messe Bremen},
  address   = {Bremen},
  isbn      = {3-933339-00-6},
  pages     = {552 -- 555},
  year      = {1998},
  language  = {en}
}
@article{GebhardtMatharPlumetal.1996,
  author    = {Gebhardt, Andreas and Mathar, W. and Plum, H-D. and Wolf, M.},
  title     = {Serienqualit{\"a}t und -st{\"u}ckzahlen durch Abformprozesse},
  pages     = {147 -- 159},
  year      = {1996},
  language  = {de}
}
@article{StarkeDrews1992,
  author    = {Starke, G{\"u}nther and Drews, P.},
  title     = {Sensorik f{\"u}r das Schutzgasschweißen mit Robotern},
  series = {DVS-Berichte. 143 (1992)},
  journal   = {DVS-Berichte. 143 (1992)},
  isbn      = {0418-9639},
  pages     = {62 -- 66},
  year      = {1992},
  language  = {de}
}
@article{StarkeDrews1985,
  author    = {Starke, G{\"u}nther and Drews, P.},
  title     = {Sensoren in der Schweisstechnik},
  series = {Die Umschau. 84 (1985), H. 5},
  journal   = {Die Umschau. 84 (1985), H. 5},
  isbn      = {0041-6347},
  pages     = {296 -- 300},
  year      = {1985},
  language  = {de}
}
@article{StarkeBeckmannRogosetal.1987,
  author    = {Starke, G{\"u}nther and Beckmann, L.-H. and Rogos, J. and Schmall, K-H. (u.a.)},
  title     = {Sensoren in der automatisierten Schweisstechnik},
  pages     = {61 -- 147},
  year      = {1987},
  language  = {de}
}
@article{Starke1986,
  author    = {Starke, G{\"u}nther},
  title     = {Sensoren fuer Schutzgasschweissroboter: Problemstellung, Funktionsweise, Handhabung und Programmierung von praxiserprobten Systemen},
  pages     = {1 -- 22},
  year      = {1986},
  language  = {de}
}
@inproceedings{BueckingPfaffDirksmeier2018,
  author    = {B{\"u}cking, Henrik and Pfaff, Raphael and Dirksmeier, Roger},
  title     = {Sensor positioning and thermal model for condition monitoring of pressure gas reservoirs in vehicles},
  series = {Proceedings of the Fourth European Conference of the Prognostics and Health Management Society, Utrecht, Netherlands, 2018},
  booktitle = {Proceedings of the Fourth European Conference of the Prognostics and Health Management Society, Utrecht, Netherlands, 2018},
  pages     = {5 Seiten},
  year      = {2018},
  language  = {en}
}
@article{RieperGebhardtStucker2016,
  author    = {Rieper, Harald and Gebhardt, Andreas and Stucker, Brent},
  title     = {Selective Laser Melting of the Eutectic Silver-Copper Alloy Ag 28 wt \% Cu},
  series = {RTejournal - Forum f{\"u}r Rapid Technologie},
  volume    = {13},
  journal   = {RTejournal - Forum f{\"u}r Rapid Technologie},
  issn      = {1614-0923},
  url       = {http://nbn-resolving.de/nbn:de:0009-2-44141},
  year      = {2016},
  abstract  = {The aim of this work was to perform a detailed investigation of the use of Selective Laser Melting (SLM) technology to process eutectic silver-copper alloy Ag 28 wt. \% Cu (also called AgCu28). The processing occurred with a Realizer SLM 50 desktop machine. The powder analysis (SEM-topography, EDX, particle distribution) was reported as well as the absorption rates for the near-infrared (NIR) spectrum. Microscope imaging showed the surface topography of the manufactured parts. Furthermore, microsections were conducted for the analysis of porosity. The Design of Experiments approach used the response surface method in order to model the statistical relationship between laser power, spot distance and pulse time.},
  language  = {en}
}
@article{FateriGebhardt2015,
  author    = {Fateri, Miranda and Gebhardt, Andreas},
  title     = {Selective Laser Melting of Soda-Lime Glass Powder},
  series = {International Journal of Applied Ceramic Technology},
  volume    = {12},
  journal   = {International Journal of Applied Ceramic Technology},
  number    = {1},
  publisher = {Wiley-Blackwell},
  address   = {Oxford},
  issn      = {1744-7402},
  doi       = {10.1111/ijac.12338},
  pages     = {53 -- 61},
  year      = {2015},
  language  = {en}
}
@article{HoetterFateriGebhardt2012,
  author    = {H{\"o}tter, Jan-Steffen and Fateri, Miranda and Gebhardt, Andreas},
  title     = {Selective laser melting of metals: desktop machines open up new chances even for small companies},
  series = {Advanced materials research},
  volume    = {622-623},
  journal   = {Advanced materials research},
  publisher = {Trans Tech Publ.},
  address   = {Baech},
  issn      = {1662-8985 (E-Journal); 1022-6680 (Print)},
  doi       = {10.4028/www.scientific.net/AMR.622-623.461},
  pages     = {461 -- 465},
  year      = {2012},
  abstract  = {Additive manufacturing (AM) of metal parts by using Selective Laser Melting (SLM) has become a powerful tool mostly in the area of automotive, aerospace engineering and others. Especially in the field of dentistry, jewelry and related branches that require individualized or even one-of-a-kind products, the direct digital manufacturing process opens up new ways of design and manufacturing. In these fields, mostly small and medium sized businesses (SME) are operating which do not have sufficient human and economic resources to invest in this technology. But to stay competitive, the application of AM can be regarded as a necessity. In this situation a new desktop machine (Realizer SLM 50) was introduced that cost about 1/3 of a shop floor SLM machine and promises small quality parts. To find out whether the machine really is an alternative for SMEs the University of Applied Science, Aachen, Germany, designed, build and optimized typical parts from the dentistry and the jewelry branches using CoCr and silver material, the latter being new with this application. The paper describes the SLM procedure and how to find and optimize the most important parameters. The test is accompanied by digital simulation in order to verify the build parameters and to plan future builds. The procedure is shown as well as the resulting parts made from CoCr and silver material.},
  language  = {en}
}
@article{EnningDollsBrunberg2009,
  author    = {Enning, Manfred and Dolls, S. and Brunberg, A.},
  title     = {Selbsteinstellverfahren f{\"u}r Temperiervorrichtungen mit Außenverrohrung / Dolls, S. ; Enning, M. ; Brunberg, A. ; Abel, D.},
  series = {Automation 2009 : Automatisierungskongress in Deutschland ; Kongress Baden-Baden, 16. und 17. Juni 2009 / VDI-VDE-Gesellschaft Mess- und Automatisierungstechnik},
  journal   = {Automation 2009 : Automatisierungskongress in Deutschland ; Kongress Baden-Baden, 16. und 17. Juni 2009 / VDI-VDE-Gesellschaft Mess- und Automatisierungstechnik},
  publisher = {VDI-Verl.},
  address   = {D{\"u}sseldorf},
  isbn      = {978-3-18-092067-2},
  pages     = {429 -- 432},
  year      = {2009},
  language  = {de}
}
@inproceedings{Benner1989,
  author    = {Benner, Joachim},
  title     = {Schwingungstechnische Dimensionierung von Maschinens{\"a}tzen mit Stromrichtermotoren},
  series = {Antriebstechnisches Kolloquium '89 : Maschinen- und Anlagen{\"u}berwachung ; Elemente der Antriebstechnik im System ; neue Konzepte in der Antriebstechnik. - (Reihe IME-Leitfaden)},
  booktitle = {Antriebstechnisches Kolloquium '89 : Maschinen- und Anlagen{\"u}berwachung ; Elemente der Antriebstechnik im System ; neue Konzepte in der Antriebstechnik. - (Reihe IME-Leitfaden)},
  editor    = {Peeken, Heinz},
  publisher = {Verl. T{\"U}V Rheinland},
  address   = {K{\"o}ln},
  issn      = {3-88585-639-5},
  pages     = {309 -- 333},
  year      = {1989},
  language  = {de}
}
@article{Benner1989,
  author    = {Benner, Joachim},
  title     = {Schwingungsbelastung von drehzahlgeregelten Antrieben mit Stromrichtermotoren},
  series = {Antriebstechnik : Konstruktion, Entwicklung und Anwendung von Antrieben und Steuerungen ; Organ der Forschungsvereinigung Antriebstechnik e.V.},
  volume    = {28},
  journal   = {Antriebstechnik : Konstruktion, Entwicklung und Anwendung von Antrieben und Steuerungen ; Organ der Forschungsvereinigung Antriebstechnik e.V.},
  number    = {12},
  publisher = {Vereinigte Fachverl.},
  address   = {Mainz},
  issn      = {0341-2652},
  pages     = {49 -- 54},
  year      = {1989},
  language  = {de}
}
@inproceedings{ReisgenSchleserThiele2012,
  author    = {Reisgen, Uwe and Schleser, Markus and Thiele, Regina},
  title     = {Schweißverbindungen in Lithium-Ionen-Batterien},
  series = {DVS Congress 2012 : Große Schweißtechnische Tagung, DVS-Studentenkongress ; Vortr{\"a}ge der Veranstaltungen in Saarbr{\"u}cken am 17. und 18. September 2012. (DVS-Berichte ; 286)},
  booktitle = {DVS Congress 2012 : Große Schweißtechnische Tagung, DVS-Studentenkongress ; Vortr{\"a}ge der Veranstaltungen in Saarbr{\"u}cken am 17. und 18. September 2012. (DVS-Berichte ; 286)},
  publisher = {DVS-Media},
  address   = {D{\"u}sseldorf},
  organization    = {Große Schweißtechnische Tagung <2012, Saarbr{\"u}cken> ; Deutscher Verband f{\"u}r Schweißen und Verwandte Verfahren},
  isbn      = {978-3-87155-593-0},
  pages     = {157 -- 161},
  year      = {2012},
  language  = {de}
}
@article{StarkeStrunzSpiess1995,
  author    = {Starke, G{\"u}nther and Strunz, U. and Spieß, C.},
  title     = {Schweißprozeßparameteroptimierung mit Fuzzy-Logik},
  series = {Schweißen und Schneiden. 47 (1995), H. 6},
  journal   = {Schweißen und Schneiden. 47 (1995), H. 6},
  isbn      = {0036-7184},
  pages     = {494 -- 503},
  year      = {1995},
  language  = {de}
}
@article{GebhardtGuntermannHaeming1997,
  author    = {Gebhardt, Andreas and Guntermann, P. and H{\"a}ming, L.},
  title     = {Schweißen mit dem Nd:YAG-Laser},
  series = {Der Praktiker, Schweißen und Schneiden. 49 (1997), H. 4},
  journal   = {Der Praktiker, Schweißen und Schneiden. 49 (1997), H. 4},
  isbn      = {0554-9965},
  pages     = {170 -- 172},
  year      = {1997},
  language  = {de}
}
@incollection{Klocke2018,
  author    = {Klocke, Martina},
  title     = {Schulter an Schulter - Zusammenarbeit in einem differenzierten Hochschulsystem},
  series = {Lehre und Lehrentwicklung an Fachhochschulen - Festschrift f{\"u}r Prof. Dr. med. W. Huhn},
  booktitle = {Lehre und Lehrentwicklung an Fachhochschulen - Festschrift f{\"u}r Prof. Dr. med. W. Huhn},
  publisher = {Waxmann},
  address   = {M{\"u}nster},
  isbn      = {978-3-8309-3782-1},
  pages     = {75 -- 80},
  year      = {2018},
  language  = {de}
}
@article{Gebhardt1999,
  author    = {Gebhardt, Andreas},
  title     = {Schnell und flexibel zur Kleinserie. Effizienzsteigerung bei der Realisierung von Komponenten und Teilsystemen},
  series = {Ingenieur-Werkstoffe. 8 (1999), H. 3},
  journal   = {Ingenieur-Werkstoffe. 8 (1999), H. 3},
  isbn      = {0935-5715},
  pages     = {8 -- 14},
  year      = {1999},
  language  = {de}
}