@article{CosmaKesslerGebhardtetal.2020,
  author    = {Cosma, Cosmin and Kessler, Julia and Gebhardt, Andreas and Campbell, Ian and Balc, Nicolae},
  title     = {Improving the Mechanical Strength of Dental Applications and Lattice Structures SLM Processed},
  series = {Materials},
  volume    = {13},
  journal   = {Materials},
  number    = {4},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {1996-1944},
  doi       = {10.3390/ma13040905},
  pages     = {1 -- 18},
  year      = {2020},
  abstract  = {To manufacture custom medical parts or scaffolds with reduced defects and high mechanical characteristics, new research on optimizing the selective laser melting (SLM) parameters are needed. In this work, a biocompatible powder, 316L stainless steel, is characterized to understand the particle size, distribution, shape and flowability. Examination revealed that the 316L particles are smooth, nearly spherical, their mean diameter is 39.09 μm and just 10\% of them hold a diameter less than 21.18 μm. SLM parameters under consideration include laser power up to 200 W, 250-1500 mm/s scanning speed, 80 μm hatch spacing, 35 μm layer thickness and a preheated platform. The effect of these on processability is evaluated. More than 100 samples are SLM-manufactured with different process parameters. The tensile results show that is possible to raise the ultimate tensile strength up to 840 MPa, adapting the SLM parameters for a stable processability, avoiding the technological defects caused by residual stress. Correlating with other recent studies on SLM technology, the tensile strength is 20\% improved. To validate the SLM parameters and conditions established, complex bioengineering applications such as dental bridges and macro-porous grafts are SLM-processed, demonstrating the potential to manufacture medical products with increased mechanical resistance made of 316L.},
  language  = {en}
}
@article{Wollert2016,
  author    = {Wollert, J{\"o}rg},
  title     = {Industrial Internet of Things : Seifenblase oder Revolution},
  series = {Elektronik},
  journal   = {Elektronik},
  number    = {7},
  publisher = {WEKA-Fachmedien},
  address   = {M{\"u}nchen},
  issn      = {0013-5658},
  pages     = {39 -- 45},
  year      = {2016},
  language  = {de}
}
@article{Klocke2003,
  author    = {Klocke, Martina},
  title     = {Ingenieurinnen dringend gesucht},
  series = {Von der Dampfmaschine zur Brennstoffzelle : 100 Jahre Ingenieurausbildung in Kiel / [Hrsg. Fachhochschule Kiel. Red. Martina Klocke]},
  journal   = {Von der Dampfmaschine zur Brennstoffzelle : 100 Jahre Ingenieurausbildung in Kiel / [Hrsg. Fachhochschule Kiel. Red. Martina Klocke]},
  publisher = {Fachhochschule},
  address   = {Kiel},
  pages     = {52 -- 55},
  year      = {2003},
  language  = {de}
}
@article{Raatschen2003,
  author    = {Raatschen, Hans-J{\"u}rgen},
  title     = {Ingenieurstudium Hundert Jahre : von der K{\"o}niglichen H{\"o}heren Maschinenbauschule Aachen zu den Ingenieurfachbereichen der Fachhochschule},
  series = {Fachblatt},
  volume    = {2003},
  journal   = {Fachblatt},
  number    = {1},
  organization    = {FH Aachen, University of Applied Sciences},
  pages     = {28 -- 29},
  year      = {2003},
  language  = {de}
}
@article{Schmitt2005,
  author    = {Schmitt, Rolf W.},
  title     = {Innovationen bei Schmierstoffen und tribologischen Systemen},
  series = {Stahl und Eisen. 125 (2005), H. 3},
  journal   = {Stahl und Eisen. 125 (2005), H. 3},
  isbn      = {0340-4803},
  pages     = {51 -- 53},
  year      = {2005},
  language  = {de}
}
@article{GebhardtPlug1995,
  author    = {Gebhardt, Andreas and Plug, T-K.},
  title     = {Innovationsschub mittels Rapid-Prototyping, Teil II},
  series = {CAD-CAM Report. 14 (1995), H. 9},
  journal   = {CAD-CAM Report. 14 (1995), H. 9},
  isbn      = {0930-7117},
  pages     = {78 -- 85},
  year      = {1995},
  language  = {de}
}
@article{GebhardtPflug1995,
  author    = {Gebhardt, Andreas and Pflug, T-K.},
  title     = {Innovationsschub mittels Rapid-Prototyping. Teil I},
  series = {CAD-CAM Report. 14 (1995), H. 7},
  journal   = {CAD-CAM Report. 14 (1995), H. 7},
  isbn      = {0930-7117},
  pages     = {56 -- 65},
  year      = {1995},
  language  = {de}
}
@article{KlockeLenk1993,
  author    = {Klocke, Martina and Lenk, Antje},
  title     = {Innovationstransfer auf der Basis von Akzeptanz und Zusammenarbeit / Lenk, Antje ; Klocke, Martina},
  series = {Berufsbildung in Wissenschaft und Praxis. BWP. 22 (1993), H. 5},
  journal   = {Berufsbildung in Wissenschaft und Praxis. BWP. 22 (1993), H. 5},
  isbn      = {0341-4515},
  pages     = {43 -- 45},
  year      = {1993},
  language  = {de}
}
@article{RoesnerScheikOlowinskyetal.2011,
  author    = {Roesner, Andreas and Scheik, Sven and Olowinsky, Alexander and Gillner, Arnold and Propawe, Reinhart and Schleser, Markus and Reisgen, Uwe},
  title     = {Innovative approach of joining hybrid components},
  series = {Journal of laser applications},
  volume    = {Vol. 23},
  journal   = {Journal of laser applications},
  number    = {Iss. 3},
  publisher = {Laser Institute of America},
  address   = {Orlando, Fla.},
  issn      = {1042-346X},
  pages     = {32007},
  year      = {2011},
  language  = {en}
}
@article{GlowaniaGriesSchoeneetal.2011,
  author    = {Glowania, Michael and Gries, Thomas and Schoene, Jens and Schleser, Markus and Reisgen, Uwe},
  title     = {Innovative coating technology for textile reinforcements of concrete applications},
  series = {13th International Congress on Polymers in Concrete : 10 - 12 February 2010, Funchal, Madeira, Portugal.(Key engineering materials. Vol. 466)},
  journal   = {13th International Congress on Polymers in Concrete : 10 - 12 February 2010, Funchal, Madeira, Portugal.(Key engineering materials. Vol. 466)},
  publisher = {Trans Tech Publications},
  address   = {B{\"a}ch},
  organization    = {International Congress Polymers in Concrete <13, 2010, Funchal, Madeira>},
  isbn      = {978-3-03785-008-4},
  issn      = {1013-9826 (E-Journal) ; 0252-1059 (Print)},
  pages     = {167 -- 173},
  year      = {2011},
  language  = {en}
}
@article{Knepper1984,
  author    = {Knepper, Ludger},
  title     = {Integrierte Hochregallager als materialflusstechnische Knotenpunkte moderner Produktions- und Umschlaganlagen},
  pages     = {93 -- 100},
  year      = {1984},
  language  = {de}
}
@article{Knepper1984,
  author    = {Knepper, Ludger},
  title     = {Integrierte Hochregallager als materialflusstechnische Knotenpunkte moderner Produktions- und Umschlaganlagen},
  series = {Deutsche Hebe- und Foerdertechnik. 30 (1984), H. 12},
  journal   = {Deutsche Hebe- und Foerdertechnik. 30 (1984), H. 12},
  isbn      = {0012-0278},
  pages     = {88 -- 93},
  year      = {1984},
  language  = {de}
}
@article{StarkeHackel2004,
  author    = {Starke, G{\"u}nther and Hackel, Matthias},
  title     = {Integrierte Oberfl{\"a}chendigitalisierung f{\"u}r die flexible Automatisierung bei kleinen Losgr{\"o}ßen},
  series = {Mechatronics \& robotics 2004 : Aachen, Germany, September 13 - 15, 2004 / [IEEE ...]. Drews, Paul [ed.]},
  journal   = {Mechatronics \& robotics 2004 : Aachen, Germany, September 13 - 15, 2004 / [IEEE ...]. Drews, Paul [ed.]},
  publisher = {Eysoldt},
  address   = {Aachen},
  isbn      = {3-938153-30-X},
  pages     = {271 -- 275},
  year      = {2004},
  language  = {de}
}
@article{Starke2002,
  author    = {Starke, G{\"u}nther},
  title     = {Integriertes Fertigungskonzept zum automatisierten Reparaturschweißen mit Robotern},
  series = {DVS-Berichte. 217 (2002)},
  journal   = {DVS-Berichte. 217 (2002)},
  isbn      = {0418-9639},
  pages     = {10 -- 13},
  year      = {2002},
  language  = {de}
}
@article{DiltheySchleserFeldmannetal.2008,
  author    = {Dilthey, Ulrich and Schleser, Markus and Feldmann, Martin and Pak, Daniel and Geßler, Achim},
  title     = {Investigation of punctiform, plane and hybrid joints of textile-reinforced concrete parts},
  series = {Cement and concrete composites},
  volume    = {Vol. 30},
  journal   = {Cement and concrete composites},
  number    = {iss. 2},
  issn      = {0958-9465},
  pages     = {82 -- 87},
  year      = {2008},
  language  = {en}
}
@article{AnikFrohberg1983,
  author    = {Anik, Sabri and Frohberg, Martin G.},
  title     = {Investigation of the thermodynamics of oxygen and the determination of phase boundaries in the system copper-oxygen-bismuth at 12000C},
  series = {Zeitschrift f{\"u}r Metallkunde},
  volume    = {74},
  journal   = {Zeitschrift f{\"u}r Metallkunde},
  number    = {8},
  issn      = {0044-3093},
  pages     = {530 -- 534},
  year      = {1983},
  language  = {en}
}
@article{AnikFrohberg1984,
  author    = {Anik, Sabri and Frohberg, Martin G.},
  title     = {Investigations of the thermodynamics of oxygen and the determination of the miscibility gap in the system copper-oxygen-lead at 12000C},
  series = {Zeitschrift f{\"u}r Metallkunde},
  volume    = {75},
  journal   = {Zeitschrift f{\"u}r Metallkunde},
  number    = {8},
  issn      = {0044-3093},
  pages     = {586 -- 589},
  year      = {1984},
  language  = {en}
}
@article{Wollert2015,
  author    = {Wollert, J{\"o}rg},
  title     = {IO-Link - f{\"u}r smarte Sensoren},
  series = {elektroniknet.de},
  journal   = {elektroniknet.de},
  year      = {2015},
  language  = {de}
}
@article{WollertBooke2016,
  author    = {Wollert, J{\"o}rg and Booke, Andreas},
  title     = {IoT von der Stange},
  series = {elektronik},
  journal   = {elektronik},
  number    = {21 (2016)},
  publisher = {WEKA-Fachmedien},
  address   = {M{\"u}nchen},
  pages     = {30 -- 37},
  year      = {2016},
  abstract  = {Heute sollte am besten jedes Ger{\"a}t in die große Rechnerwolke eingebettet werden. Doch so einfach ist das nicht, denn Cloud ist viel mehr als nur das Internet der Dinge. Als Anwender muss man sich also fragen, welche Dienste man m{\"o}chte und welchem Anbieter man sein Vertrauen schenkt.},
  language  = {de}
}
@article{Wollert2008,
  author    = {Wollert, J{\"o}rg},
  title     = {IT ins Auto! IP im Ethernet und der USB k{\"o}nnen im Kfz gut genutzt werden},
  series = {Elektronik automotive : Magazin f{\"u}r Entwicklungen in der Kfz-Elektronik und Telematik},
  journal   = {Elektronik automotive : Magazin f{\"u}r Entwicklungen in der Kfz-Elektronik und Telematik},
  number    = {H. 9},
  issn      = {1614-0125},
  pages     = {46 -- 51},
  year      = {2008},
  language  = {de}
}