@article{KaemperEhrfeldHesseletal.1997, author = {K{\"a}mper, Klaus-Peter and Ehrfeld, W. and Hessel, V. and Lacher, M.}, title = {Market oriented development and production of microdevices. Ehrfeld, W.; Hessel, V.; K{\"a}mper, K.-P.; Lacher, M.; Picard, A.; Schmidt, M.; Schulz, C.}, series = {Proceedings : 21th International Conference on Microelectronics : MIEL '97 ; Niš, Yugoslavia, 14-17 September 1997. Vol. 1}, journal = {Proceedings : 21th International Conference on Microelectronics : MIEL '97 ; Niš, Yugoslavia, 14-17 September 1997. Vol. 1}, publisher = {IEEE Service Center}, address = {Piscataway, NJ}, isbn = {0-7803-3664-X}, pages = {71 -- 79}, year = {1997}, language = {en} } @article{KaemperLehrEhrfeldetal.1997, author = {K{\"a}mper, Klaus-Peter and Lehr, H. and Ehrfeld, W. and Hagemann, B.}, title = {Development of micro and millimotors. Lehr, H.; Ehrfeld, W.; Hagemann, B.; K{\"a}mper, K.-P.; Michel, F.; Schulz, C.; Th{\"u}rigen C.}, series = {Minimally Invasive Therapy and Allied Technologies. 6 (1997)}, journal = {Minimally Invasive Therapy and Allied Technologies. 6 (1997)}, isbn = {1364-5706}, year = {1997}, language = {en} } @article{KaemperDoepperEhrfeldetal.1998, author = {K{\"a}mper, Klaus-Peter and D{\"o}pper, J. and Ehrfeld, W. and Oberbeck, S.}, title = {A self-filling low-cost membrane micropump}, series = {Proceedings : an investigation of micro structures, sensors, actuators, machines and systems / sponsored by the IEEE Robotics and Automation Society in cooperation with the ASME Dynamic Systems and Control Division}, journal = {Proceedings : an investigation of micro structures, sensors, actuators, machines and systems / sponsored by the IEEE Robotics and Automation Society in cooperation with the ASME Dynamic Systems and Control Division}, publisher = {IEEE Service Center}, address = {Piscataway, NJ}, isbn = {078034412X}, pages = {432 -- 437}, year = {1998}, language = {en} } @article{Kaemper2003, author = {K{\"a}mper, Klaus-Peter}, title = {Education and Training in MST. K{\"a}mper, K.-P.; Picard, A.; Brill, M.; Cassel, D.; Jentsch, A.; Merten, S.; Rollwa, M.}, series = {Mst-News (2003)}, journal = {Mst-News (2003)}, isbn = {0948-3128}, pages = {35}, year = {2003}, language = {en} } @article{KaemperSchulzEhrfeldetal.1994, author = {K{\"a}mper, Klaus-Peter and Schulz, C. and Ehrfeld, W. and Erbel, R.}, title = {LIGA Fabricated Microsystems for Medical and Related Applications. Schulz, C.; Ehrfeld, W.; Erbel, R.; K{\"a}mper, K.-P.; Koch, L.; Lehr, H.; Roth, T.}, series = {3-Day Course on Microengineering in Medicine and Biology and its Applications to Minimally Invasive Techniques for Therapy and Medical Diagnosis : EURO-BME 94; October 5, 6, and 7, 1994, Swiss Federal Institute of Technology, EPFL, Lausanne, Switzerland / [the 1994 EURO-BME Microengineering in Medicine and Biology Training Course. Staff: Christian D. Depeursinge ...]}, journal = {3-Day Course on Microengineering in Medicine and Biology and its Applications to Minimally Invasive Techniques for Therapy and Medical Diagnosis : EURO-BME 94; October 5, 6, and 7, 1994, Swiss Federal Institute of Technology, EPFL, Lausanne, Switzerland / [the 1994 EURO-BME Microengineering in Medicine and Biology Training Course. Staff: Christian D. Depeursinge ...]}, publisher = {REPRO EPFL}, address = {Lausanne}, pages = {Getr. Z{\"a}hlung : Ill., graph. Darst.}, year = {1994}, language = {en} } @article{KaemperPicardSchuetzeetal.2006, author = {K{\"a}mper, Klaus-Peter and Picard, A. and Sch{\"u}tze, A. and Wallach, D.}, title = {Adopting the Foundry Concept of Semiconductor Fabrication on Educational Schemes and the Virtual Technology Lab (VTL). Picard, A.; K{\"a}mper, K.-P.; Sch{\"u}tze, A.; Wallach, D.; Walter, T.}, series = {Mst-News (2006)}, journal = {Mst-News (2006)}, isbn = {0948-3128}, pages = {15, 16 -- u. 35}, year = {2006}, language = {en} } @article{KaemperDoepperEhrfeldetal.1995, author = {K{\"a}mper, Klaus-Peter and D{\"o}pper, J. and Ehrfeld, W. and Hagemann, B.}, title = {Simulation supported design of LIGA Microsystems. K{\"a}mper, K.-P.; D{\"o}pper, J.; Ehrfeld, W.; Hagemann, B.; Hill, S.D.J.; Lehr, H.}, series = {Simulation and design of microsystems and microstructures : [... contains the papers presented at the First International Conference on the Simulation and Design of Microsystems and Microstructures, MicroSIM '95, which was held in Southampton, UK, in September 1995] / [organised by: Wessex Institute of Technology, UK]. Ed.: R. A. Adey}, journal = {Simulation and design of microsystems and microstructures : [... contains the papers presented at the First International Conference on the Simulation and Design of Microsystems and Microstructures, MicroSIM '95, which was held in Southampton, UK, in September 1995] / [organised by: Wessex Institute of Technology, UK]. Ed.: R. A. Adey}, publisher = {Computational Mechanics Publ.}, address = {Southampton [u.a.]}, isbn = {1-85312-390-0}, pages = {3 -- 10}, year = {1995}, language = {en} } @article{KaemperDoepperEhrfeldetal.1995, author = {K{\"a}mper, Klaus-Peter and D{\"o}pper, J. and Ehrfeld, W. and Hagemann, B.}, title = {An investigation of computer modelling for micro-injection moulding. Hill, S.D.J.; K{\"a}mper, K.-P.; Dasbach, U.; D{\"o}pper, J.; Ehrfeld, W.; Kaupert, M.}, series = {Simulation and design of microsystems and microstructures : [... contains the papers presented at the First International Conference on the Simulation and Design of Microsystems and Microstructures, MicroSIM '95, which was held in Southampton, UK, in September 1995] / [organised by: Wessex Institute of Technology, UK]. Ed.: R. A. Adey}, journal = {Simulation and design of microsystems and microstructures : [... contains the papers presented at the First International Conference on the Simulation and Design of Microsystems and Microstructures, MicroSIM '95, which was held in Southampton, UK, in September 1995] / [organised by: Wessex Institute of Technology, UK]. Ed.: R. A. Adey}, publisher = {Computational Mechanics Publ.}, address = {Southampton [u.a.]}, isbn = {1-85312-390-0}, pages = {275}, year = {1995}, language = {en} } @article{KaemperEhrfeldHagemannetal.1996, author = {K{\"a}mper, Klaus-Peter and Ehrfeld, W. and Hagemann, B. and Lehr, H.}, title = {Electromagnetic permanent magnet micromotor with integrated micro gear box. K{\"a}mper, K.-P.; Ehrfeld, W.; Hagemann, B.; Lehr, H.; Michel, F.; Schirling, A.; Th{\"u}rigen, C.; Wittig, T.}, series = {Actuator 96 : Conference Proceedings ; 5th International Conference on New Actuators ; 26- 28 June, Bremen, Germany / Ed.: Hubert Borgmann. Publ. by: AXON Technology Consult GmbH}, journal = {Actuator 96 : Conference Proceedings ; 5th International Conference on New Actuators ; 26- 28 June, Bremen, Germany / Ed.: Hubert Borgmann. Publ. by: AXON Technology Consult GmbH}, address = {Bremen}, pages = {429}, year = {1996}, language = {en} } @article{KaemperAbrahamEhrfeldetal.1998, author = {K{\"a}mper, Klaus-Peter and Abraham, M. and Ehrfeld, W. and Hessel, V.}, title = {Microsystem technology: Between research and industrial application. Abraham, M.; Ehrfeld, W.; Hessel, V.; K{\"a}mper, K.-P.; Lacher, M.; Picard, A.}, series = {Microelectronic Engineering. 41-42 (1998)}, journal = {Microelectronic Engineering. 41-42 (1998)}, isbn = {0167-9317}, pages = {47 -- 52}, year = {1998}, language = {en} } @article{KaemperSchmittGuentherodt1988, author = {K{\"a}mper, Klaus-Peter and Schmitt, W. and G{\"u}ntherodt, G.}, title = {Temperature dependence of the exchange splitting of Ni along the \&\#61511;-L line}, series = {Journal de physique. 49 (1988), H. 12. Supplement, Colloque C8}, journal = {Journal de physique. 49 (1988), H. 12. Supplement, Colloque C8}, pages = {39 -- 40}, year = {1988}, language = {en} } @article{KaemperHagemannLehretal.1995, author = {K{\"a}mper, Klaus-Peter and Hagemann, B. and Lehr, H. and Michel, F.}, title = {LIGA Example 2: Electromagnetic Micromotor. Hagemann, B.; K{\"a}mper, K.-P.; Lehr, H.; Michel, F.; Th{\"u}rigen, C.}, series = {LIGA technique / Hans-Dieter Bauer (ed.). [Developed by UETP-MEMS, University Training Partnership for Micro-Electro-Mechanical Systems ...]. - 2.ed.}, journal = {LIGA technique / Hans-Dieter Bauer (ed.). [Developed by UETP-MEMS, University Training Partnership for Micro-Electro-Mechanical Systems ...]. - 2.ed.}, publisher = {FSRM}, address = {Neuchatel}, pages = {100 -- 110}, year = {1995}, language = {en} } @article{Hanrath1989, author = {Hanrath, Wilhelm}, title = {Character tables of some factor groups of space groups}, series = {Perfect groups / Derek F. Holt and W. Plesken}, journal = {Perfect groups / Derek F. Holt and W. Plesken}, publisher = {Clarendon Press}, address = {Oxford}, isbn = {0-19-853559-7}, pages = {357 -- 359}, year = {1989}, language = {en} } @article{HanrathPlesken1985, author = {Hanrath, Wilhelm and Plesken, Wilhelm}, title = {Group rings and irreducible representations of space groups / by W. Hanrath and W. Plesken}, series = {Journal f{\"u}r die reine und angewandte Mathematik. 362 (1985)}, journal = {Journal f{\"u}r die reine und angewandte Mathematik. 362 (1985)}, isbn = {0075-4102}, pages = {130 -- 140}, year = {1985}, language = {en} } @article{HanrathPlesken1984, author = {Hanrath, Wilhelm and Plesken, Wilhelm}, title = {The lattices of six-dimensional euclidean space}, series = {Mathematics of computation. 43 (1984), H. 168}, journal = {Mathematics of computation. 43 (1984), H. 168}, isbn = {0025-5718}, pages = {573 -- 587}, year = {1984}, language = {en} } @article{MautnerForsterKornhuberetal.2008, author = {Mautner, Karin and Forster, Ralf and Kornhuber, Ralf and Sander, Oliver}, title = {Fast and Reliable Pricing of American Options with Local Volatility / Forster, Ralf ; Kornhuber, Ralf ; Mautner, Karin ; Sander, Oliver}, series = {Domain Decomposition Methods in Science and Engineering XVII}, journal = {Domain Decomposition Methods in Science and Engineering XVII}, isbn = {978-3-540-75198-4}, pages = {383 -- 390}, year = {2008}, language = {en} } @article{EnningBaier2009, author = {Enning, Manfred and Baier, M.}, title = {Energetic and operational use of FlexCargoRail freight wagons in the single wagon load traffic / Baier, M. ; Enning, M.}, series = {Towards zero emission : EVS 24, the 24th International Battery, Hybrid and Fuel Cell Electric Vehicle Symposium \& Exhibition, Stavanger, Norway, May 13 - 16, 2009 ; symposium proceedings / organised by AVERE ... Robert St{\"u}ssi [Hrsg.]}, journal = {Towards zero emission : EVS 24, the 24th International Battery, Hybrid and Fuel Cell Electric Vehicle Symposium \& Exhibition, Stavanger, Norway, May 13 - 16, 2009 ; symposium proceedings / organised by AVERE ... Robert St{\"u}ssi [Hrsg.]}, address = {Stavanger}, pages = {CD-Rom}, year = {2009}, language = {en} } @article{EnningHueckerJenayehetal.1999, author = {Enning, Manfred and H{\"u}cker, Jan and Jenayeh, Imad and Rake, Heinrich}, title = {A Parametric Identification Scheme for a Self-tuning Industrial Compact Controller - INTERKAMA 1999 / Hucker, Jan ; Jenayeh, Imad ; Enning, Manfred ; Rake, Heinrich}, year = {1999}, language = {en} } @article{EnningBernhardRake1994, author = {Enning, Manfred and Bernhard, S. and Rake, H.}, title = {Automation of a laboratory plant for direct casting of thin steel strips / Bernhard, S. ; Enning, M. ; Rake, H.}, series = {Control Engineering Practice. 2 (1994), H. 6}, journal = {Control Engineering Practice. 2 (1994), H. 6}, isbn = {0967-0661}, pages = {961 -- 967}, year = {1994}, language = {en} } @article{EnningStuetzleVierecketal.2006, author = {Enning, Manfred and St{\"u}tzle, Thorsten and Viereck, Uwe and Stribersky, Anton}, title = {Creepage control for use in wheelslide protection systems / St{\"u}tzle, Thorsten ; Viereck, Uwe ; Stribersky, Anton ; Rulka, Wolfgang ; Enning, Manfred ; Abel, Dirk}, series = {Control in transportation systems : proceedings of the 11th IFAC symposium on control in transportation systems (CTS 2006), August 29-31, 2006, Delft, the Netherlands / International Federation of Automatic Control}, journal = {Control in transportation systems : proceedings of the 11th IFAC symposium on control in transportation systems (CTS 2006), August 29-31, 2006, Delft, the Netherlands / International Federation of Automatic Control}, isbn = {0742-5953}, pages = {1 CD-ROM}, year = {2006}, language = {en} } @article{EnningJenayehMuelleretal.1997, author = {Enning, Manfred and Jenayeh, I. and M{\"u}ller, C. and Rake, Heinrich}, title = {Development and realization of a manipulator for automatic decoupling of freight cars in marshalling yards / Jenayeh, I. ; M{\"u}ller, C. ; Enning, Manfred ; Rake, Heinrich ; Peter, J.}, year = {1997}, language = {en} } @article{EnningJenayehMuelleretal.1998, author = {Enning, Manfred and Jenayeh, I. and M{\"u}ller, C. and Kositza, N.}, title = {Mechatronics in automating shunting processes in marshalling yards / Jenayeh, I. ; M{\"u}ller, C.; Kositza, N. ; Enning, M. ; Rake, H.}, series = {Mechatronics '98 : proceedings of the 6th UK Mechatronics Forum International Conference, Sk{\"o}vde, Sweden, 9-11 September 1998}, journal = {Mechatronics '98 : proceedings of the 6th UK Mechatronics Forum International Conference, Sk{\"o}vde, Sweden, 9-11 September 1998}, publisher = {Pergamon}, address = {Amsterdam}, isbn = {0-08-043339-1}, pages = {xxi, 918 S. : graph. Darst.}, year = {1998}, language = {en} } @article{EnningJenayehMuelleretal.1998, author = {Enning, Manfred and Jenayeh, I. and M{\"u}ller, C. and Kositza, N.}, title = {A New Approach for Automating Shunting Processes in Marshalling Yards / Jenayeh, I.; M{\"u}ller, C. ; Kositza, N. ; Enning, M. ; Rake, H.}, series = {Computational Engineering in Systems Applications : 2nd IMACS International Multiconference CESA'98; [abstracts; Nabeul-Hammamet, Tunisia, April 1 - 4, 1998] / ed. by Pierre Borne}, journal = {Computational Engineering in Systems Applications : 2nd IMACS International Multiconference CESA'98; [abstracts; Nabeul-Hammamet, Tunisia, April 1 - 4, 1998] / ed. by Pierre Borne}, publisher = {UCIS}, address = {Villeneuve d'Ascq}, pages = {338 -- 343}, year = {1998}, language = {en} } @article{EnningMannBolligetal.2003, author = {Enning, Manfred and Mann, S. and Bollig, A. and Kaierle, S.}, title = {Autonomous Production Cell for Laser Beam Welding / Mann S. ; Bollig, A. ; Kaierle, S. ; Abel, D. ; Poprawe, R.}, publisher = {LIA}, address = {Orlando, Fla}, isbn = {0912035757}, year = {2003}, language = {en} } @article{EnningZambouAbel2005, author = {Enning, Manfred and Zambou, N. and Abel, D.}, title = {Longitudinal Control of Following Vehicles within Platoon : A Model-Based Predictive Approach / Zambou, N. ; Enning, M. ; Abel, D.}, series = {Advances in automotive control 2004 : a proceedings volume from the IFAC symposium, Salerno, Italy, 19 - 23 April 2004 / ed. C. Pianese}, journal = {Advances in automotive control 2004 : a proceedings volume from the IFAC symposium, Salerno, Italy, 19 - 23 April 2004 / ed. C. Pianese}, publisher = {Elsevier}, address = {Oxford}, isbn = {0080442501}, pages = {733 -- 738}, year = {2005}, language = {en} } @article{EnningZambouAbel2004, author = {Enning, Manfred and Zambou, Nathan and Abel, Dirk}, title = {Nonlinear spacing control of following vehicles within platoon a controlled lagrangian approach / Zambou, Nathan ; Enning, Manfred ; Abel, Dirk}, series = {NOLCOS, IFAC Symposium on Nonlinear Control Systems}, journal = {NOLCOS, IFAC Symposium on Nonlinear Control Systems}, pages = {1211 -- 1216}, year = {2004}, language = {en} } @article{KallweitDuesSiekmann1994, author = {Kallweit, Stephan and Dues, M. W. and Siekmann, H. E.}, title = {Spectral Analysis of Pressure Fluctuations and Velocity Fields as Investigated on Propeller Pumps / Dues, M. W. ; Kallweit, S. D. ; Siekmann, H. E.}, series = {Preprints : Fifth International Symposium on Transport Phenomena and Dynamics of Rotating Machinery (ISROMAC-5) : May 8 - 11, 1994, Maui Marriott Hotel, Kaanapali, Maui, Hawaii, U.S.A / sponsored by Pacific Center of Thermal-Fluids Engineering. [W.-J. Yang, chairman] / Vol. B.}, journal = {Preprints : Fifth International Symposium on Transport Phenomena and Dynamics of Rotating Machinery (ISROMAC-5) : May 8 - 11, 1994, Maui Marriott Hotel, Kaanapali, Maui, Hawaii, U.S.A / sponsored by Pacific Center of Thermal-Fluids Engineering. [W.-J. Yang, chairman] / Vol. B.}, pages = {98 -- 112}, year = {1994}, language = {en} } @article{KallweitKaminskyRossietal.2008, author = {Kallweit, Stephan and Kaminsky, Radoslav and Rossi, Massimiliano and Morbiducci, Umberto}, title = {PIV Measurements of Flows in Artificial Heart Valves / Kaminsky, Radoslav ; Kallweit, Stephan ; Rossi, Massimiliano ; Morbiducci, Umberto ; Scalise, Lorenzo}, series = {Particle Image Velocimetry - New Developments and Recent Applications}, journal = {Particle Image Velocimetry - New Developments and Recent Applications}, isbn = {978-3-540-73528-1}, pages = {55 -- 72}, year = {2008}, language = {en} } @article{KallweitHelbingOrglmeisteretal.1994, author = {Kallweit, Stephan and Helbing, M. and Orglmeister, R. and Siekmann, H. E.}, title = {Image Processing Techniques with Neural Networks for Flow Visualization in Rotating Machinery / Helbing, M. ; Orgimeiste, R. [Orglmeister, R.] ; Kallweit, S. ; Siekmann, H. E. ; Dues, M. ; Cronemeyer, J.}, series = {FLUCOME '94 : the 4th Triennial International Symposium on Fluid Control, Measurement and Visualization; August 29 - September 1, 1994, Toulouse, France, International Congress Centre, DIGORA-Lab{\`e}ge / CERT/ONERA. General chairman Patrick Hebrard}, journal = {FLUCOME '94 : the 4th Triennial International Symposium on Fluid Control, Measurement and Visualization; August 29 - September 1, 1994, Toulouse, France, International Congress Centre, DIGORA-Lab{\`e}ge / CERT/ONERA. General chairman Patrick Hebrard}, address = {Toulouse}, pages = {87 -- 94}, year = {1994}, language = {en} } @article{KallweitUchiyamaSiekmann1998, author = {Kallweit, Stephan and Uchiyama, R. and Siekmann, H.}, title = {Fault Diagnostic Method for Pump Running Conditions Based on Process Modeling and Neural Network / Uchiyama, R. ; Kallweit, S. ; Siekmann, H.}, series = {International Journal of Rotating Machinery. 4 (1998), H. 1}, journal = {International Journal of Rotating Machinery. 4 (1998), H. 1}, isbn = {1542-3034}, pages = {49 -- 59}, year = {1998}, language = {en} } @article{KallweitSchimpf2003, author = {Kallweit, Stephan and Schimpf, Axel}, title = {Photogrammetric Particle Image Velocimetry / Schimpf, Axel ; Kallweit, Stephan}, series = {Particle image velocimetry : recent improvements; proceedings of the Europiv 2 Workshop held in Zaragoza, Spain, March 31 - April 1, 2003 / edited by M. Stanislas ...}, journal = {Particle image velocimetry : recent improvements; proceedings of the Europiv 2 Workshop held in Zaragoza, Spain, March 31 - April 1, 2003 / edited by M. Stanislas ...}, publisher = {Springer}, address = {Berlin}, isbn = {3-540-21423-2}, pages = {295}, year = {2003}, language = {en} } @article{KallweitWillertDuesetal.2008, author = {Kallweit, Stephan and Willert, Chris and Dues, Michael and M{\"u}ller, Ulrich}, title = {PIV for Volume Flow Metering / Kallweit, Stephan ; Willert, Chris ; Dues, Michael ; M{\"u}ller, Ulrich ; Lederer, Thomas}, pages = {6 S.}, year = {2008}, language = {en} } @article{KallweitKaminskyRossietal.2005, author = {Kallweit, Stephan and Kaminsky, R. and Rossi, M. and Morbiducci, U.}, title = {Time resolved PIV technique for high temporal resolution measurements of prosthetic heart valves fluid dynamics / Kaminsky, R. ; Rossi, M. ; Morbiducci, U. ; Scalise, L. ; Catellini, P. ; Kallweit, S. ; Verdonck, P. ; Grigioni, M.}, series = {The International Journal of Artificial Organs. 28 (2005), H. 9}, journal = {The International Journal of Artificial Organs. 28 (2005), H. 9}, isbn = {1724-6040}, pages = {946}, year = {2005}, language = {en} } @article{KallweitKaminskyRossietal.2005, author = {Kallweit, Stephan and Kaminsky, R. and Rossi, M. and Morbiducci, U.}, title = {2D PIV Study of the flow downstream : Two prototypes of a ney monoleaflet artificial aortic heart valve prosthesis / Kaminsky, R. ; Kramm, K. ; Weber, H. J. ; Simons, A. P. ; Kallweit, S. ; Verdonck, P. R.}, series = {The International Journal of Artificial Organs. 28 (2005), H. 9}, journal = {The International Journal of Artificial Organs. 28 (2005), H. 9}, isbn = {1724-6040}, pages = {921}, year = {2005}, language = {en} } @article{KallweitKaminskyRossietal.2005, author = {Kallweit, Stephan and Kaminsky, R. and Rossi, M. and Morbiducci, U.}, title = {3D PIV measurements of prosthetic heart valve dynamics / Kaminsky, R. ; Rossi, M. ; Morbiducci, U. ; Scalise, L. ; Castellini, P. ; Kallweit, S. ; Verdonck, P. ; Grigioni, M.}, series = {The International Journal of Artificial Organs. 28 (2005), H. 9}, journal = {The International Journal of Artificial Organs. 28 (2005), H. 9}, isbn = {1724-6040}, pages = {868}, year = {2005}, language = {en} } @article{KallweitVanlanduitVanherzeeleetal.2007, author = {Kallweit, Stephan and Vanlanduit, S. and Vanherzeele, J. and Brouns, M.}, title = {Time resolved PIV reconstruction of periodic flows / Vanlanduit, S. ; Vanherzeele, J. ; Kallweit, S. ; Brouns, M. ; Guillaume, P.}, series = {PIV'07, 7th International Symposium on Particle Image Velocimetry, Roma, IT, Sep 11-14, 2007}, journal = {PIV'07, 7th International Symposium on Particle Image Velocimetry, Roma, IT, Sep 11-14, 2007}, pages = {1 -- 14}, year = {2007}, language = {en} } @article{KallweitDuesSiekmann1994, author = {Kallweit, Stephan and Dues, M. and Siekmann, H.}, title = {Particle-Image-Velocimetry (PIV) in rotierenden Maschinen / Dues, M. ; Kallweit, S. ; Siekmann, H.}, series = {Lasermethoden in der Str{\"o}mungsmesstechnik, 3. Fachtagung der Deutschen Gesellschaft f{\"u}r Laser-Anemometrie (GALA), Bremen, DE, 5.-7. Sep, 1994}, journal = {Lasermethoden in der Str{\"o}mungsmesstechnik, 3. Fachtagung der Deutschen Gesellschaft f{\"u}r Laser-Anemometrie (GALA), Bremen, DE, 5.-7. Sep, 1994}, publisher = {Shaker}, address = {Aachen}, isbn = {3-8265-0162-4}, pages = {19.1 -- 19-5}, year = {1994}, language = {en} } @article{KallweitKaminskyRossietal.2005, author = {Kallweit, Stephan and Kaminsky, R. and Rossi, M. and Scalise, L.}, title = {PIV Measurements with high temporal Resolution behind Artificial Heart Valves / Kaminsky, R. ; Rossi, M. ; Scalise, L. ; Kallweit, S. ; Verdonck, P.}, series = {Proceedings of the 6th International Symposium on Particle Image Velocimetry}, journal = {Proceedings of the 6th International Symposium on Particle Image Velocimetry}, publisher = {Caltech}, address = {Pasadena, CA}, year = {2005}, language = {en} } @article{DuesGebhardtKallweitetal.1994, author = {Dues, M. and Gebhardt, Andreas and Kallweit, Stephan and Scheffler, T. and Siekmann, H. and Uchiyama, T.}, title = {Flow Visualization in a Cavitating Flow}, series = {Proceedings of the German-Japanese Symposium on Multi-Phase Flow : Karlsruhe, Germany, August 23 - 25, 1994 / comp. by U. M{\"u}ller ...}, journal = {Proceedings of the German-Japanese Symposium on Multi-Phase Flow : Karlsruhe, Germany, August 23 - 25, 1994 / comp. by U. M{\"u}ller ...}, publisher = {Kernforschungszentrum Karlsruhe}, address = {Karlsruhe}, pages = {391 -- 402}, year = {1994}, language = {en} } @article{GebhardtSchmidtHoetteretal.2010, author = {Gebhardt, Andreas and Schmidt, Frank-Michael and H{\"o}tter, Jan-Steffen and Sokalla, Wolfgang and Sokalla, Patrick}, title = {Additive Manufacturing by selective laser melting the realizer desktop machine and its application for the dental industry}, series = {Physics Procedia}, volume = {5}, journal = {Physics Procedia}, number = {2}, isbn = {1875-3892}, pages = {543 -- 549}, year = {2010}, language = {en} } @article{FateriHoetterGebhardt2012, author = {Fateri, Miranda and H{\"o}tter, Jan-Steffen and Gebhardt, Andreas}, title = {Experimental and Theoretical Investigation of Buckling Deformation of Fabricated Objects by Selective Laser Melting}, series = {Physics Procedia}, volume = {39}, journal = {Physics Procedia}, publisher = {Elsevier}, address = {Amsterdam}, issn = {1875-3892}, doi = {10.1016/j.phpro.2012.10.062}, pages = {464 -- 470}, year = {2012}, abstract = {Although Selective Laser Melting (SLM) process is an innovative manufacturing method, there are challenges such as inferior mechanical properties of fabricated objects. Regarding this, buckling deformation which is caused by thermal stress is one of the undesired mechanical properties which must be alleviated. As buckling deformation is more observable in hard to process materials, silver is selected to be studied theoretically and experimentally for this paper. Different scanning strategies are utilized and a Finite Element Method (FEM) is applied to calculate the temperature gradient in order to determine its effect on the buckling deformation of the objects from experiments.}, language = {en} } @article{GebhardtFateri2013, author = {Gebhardt, Andreas and Fateri, Miranda}, title = {3D printing and its applications}, series = {RTejournal - Forum f{\"u}r Rapid Technologie}, volume = {10}, journal = {RTejournal - Forum f{\"u}r Rapid Technologie}, number = {1}, publisher = {Fachhochschule Aachen}, address = {Aachen}, issn = {1614-0923}, url = {http://nbn-resolving.de/urn:nbn:de:0009-2-35626}, year = {2013}, abstract = {Eine zunehmende Anzahl von Artikeln in Publikumszeitschriften und Journalen r{\"u}ckt die direkte Herstellung von Bauteilen und Figuren immer mehr in das Bewusstsein einer breiten {\"O}ffentlichkeit. Leider ergibt sich nur selten ein einigermaßen vollst{\"a}ndiges Bild davon, wie und in welchen Lebensbereichen diese Techniken unseren Alltag ver{\"a}ndern werden. Das liegt auch daran, dass die meisten Artikel sehr technisch gepr{\"a}gt sind und sich nur punktuell auf Beispiele st{\"u}tzen. Dieser Beitrag geht von den Bed{\"u}rfnissen der Menschen aus, wie sie z.B. in der Maslow'schen Bed{\"u}rfnispyramide strukturiert dargestellt sind und unterstreicht dadurch, dass 3D Printing (oder Additive Manufacturing resp. Rapid Prototyping) bereits alle Lebensbereiche erfasst hat und im Begriff ist, viele davon zu revolutionieren.}, language = {en} } @article{AbdelLatifPeekenBenner1985, author = {Abdel-Latif, Lotfie Ahmed and Peeken, Heinz and Benner, Joachim}, title = {Thermohydrodynamic analysis of thrust-bearing with circular pads running on bubbly oil (BTHD-theory)}, series = {Journal of tribology}, volume = {107}, journal = {Journal of tribology}, number = {4}, isbn = {0742-4787}, issn = {1528-8897}, pages = {527 -- 537}, year = {1985}, language = {en} } @article{FrohbergAnik1985, author = {Frohberg, Martin G. and Anik, Sabri}, title = {The calculation of component activities of binary metallic melts from their gas solubilities}, series = {Zeitschrift f{\"u}r Metallkunde}, volume = {76}, journal = {Zeitschrift f{\"u}r Metallkunde}, number = {2}, issn = {0044-3093}, pages = {135 -- 137}, year = {1985}, language = {en} } @article{AnikFrohberg1984, author = {Anik, Sabri and Frohberg, Martin G.}, title = {Thermodynamics and solubility of oxygen in liquid copper-lead alloys at 1200°C from E.M.F. measurements}, series = {Berichte der Bunsengesellschaft f{\"u}r physikalische Chemie}, volume = {88}, journal = {Berichte der Bunsengesellschaft f{\"u}r physikalische Chemie}, number = {8}, issn = {0940-483X}, pages = {707 -- 710}, year = {1984}, language = {en} } @article{AnikFrohbergKapoor1983, author = {Anik, Sabri and Frohberg, Martin G. and Kapoor, Madan Lal}, title = {Experiments and theoretical considerations on the solution of oxygen in binary metal alloys}, series = {Berichte der Bunsengesellschaft f{\"u}r physikalische Chemie}, volume = {87}, journal = {Berichte der Bunsengesellschaft f{\"u}r physikalische Chemie}, number = {12}, issn = {0005-9021}, pages = {1201 -- 1204}, year = {1983}, language = {en} } @article{FrohbergAnik1985, author = {Frohberg, Martin G. and Anik, Sabri}, title = {Thermodynamic relations between component activities and gas solubilities in binary metallic systems}, series = {Berichte der Bunsengesellschaft f{\"u}r physikalische Chemie}, volume = {89}, journal = {Berichte der Bunsengesellschaft f{\"u}r physikalische Chemie}, number = {2}, issn = {0940-483X}, pages = {130 -- 134}, year = {1985}, language = {en} } @article{AnikFrohberg1987, author = {Anik, Sabri and Frohberg, Martin G.}, title = {Thermodynamics and solubility of oxygen in liquid bismuth-lead and bismuth-antimony alloys}, series = {Berichte der Bunsengesellschaft f{\"u}r physikalische Chemie}, volume = {91}, journal = {Berichte der Bunsengesellschaft f{\"u}r physikalische Chemie}, number = {7}, issn = {0940-483X}, pages = {790 -- 794}, year = {1987}, language = {en} } @article{WangAnikFrohberg1988, author = {Wang, Mao and Anik, Sabri and Frohberg, Martin G.}, title = {Experiments on the electrochemical determination of the sulphur activities in the system copper-silver at 1200°C}, series = {Zeitschrift f{\"u}r Metallkunde}, volume = {79}, journal = {Zeitschrift f{\"u}r Metallkunde}, number = {5}, issn = {0044-3093}, pages = {336 -- 339}, year = {1988}, language = {en} } @article{AnikFrohberg1984, author = {Anik, Sabri and Frohberg, Martin G.}, title = {Investigations of the thermodynamics of oxygen and the determination of the miscibility gap in the system copper-oxygen-lead at 12000C}, series = {Zeitschrift f{\"u}r Metallkunde}, volume = {75}, journal = {Zeitschrift f{\"u}r Metallkunde}, number = {8}, issn = {0044-3093}, pages = {586 -- 589}, year = {1984}, language = {en} } @article{FrohbergAnik1983, author = {Frohberg, Martin G. and Anik, Sabri}, title = {The application of a quadi-chemical lattice model to binary metallic solvents containing oxygen in higher concentrations}, series = {Zeitschrift f{\"u}r Metallkunde}, volume = {74}, journal = {Zeitschrift f{\"u}r Metallkunde}, number = {10}, issn = {0044-3093}, pages = {665 -- 666}, year = {1983}, language = {en} } @article{AnikFrohberg1983, author = {Anik, Sabri and Frohberg, Martin G.}, title = {Investigation of the thermodynamics of oxygen and the determination of phase boundaries in the system copper-oxygen-bismuth at 12000C}, series = {Zeitschrift f{\"u}r Metallkunde}, volume = {74}, journal = {Zeitschrift f{\"u}r Metallkunde}, number = {8}, issn = {0044-3093}, pages = {530 -- 534}, year = {1983}, language = {en} } @article{AnikKapoorFrohberg1983, author = {Anik, Sabri and Kapoor, Madan Lal and Frohberg, Martin G.}, title = {Thermodynamic behaviour of oxygen in molten substitutional alloy solvents}, series = {Zeitschrift f{\"u}r Metallkunde}, volume = {74}, journal = {Zeitschrift f{\"u}r Metallkunde}, number = {1}, issn = {0044-3093}, pages = {53 -- 58}, year = {1983}, language = {en} } @article{AnikFrohbergKapoor1983, author = {Anik, Sabri and Frohberg, Martin G. and Kapoor, Madan Lal}, title = {Prediction of thermodynamic properties of oxygen in binary metallic solvents}, series = {Zeitschrift f{\"u}r Metallkunde}, volume = {74}, journal = {Zeitschrift f{\"u}r Metallkunde}, number = {6}, issn = {0044-3093}, pages = {372 -- 375}, year = {1983}, language = {en} } @article{AnikFrohberg1988, author = {Anik, Sabri and Frohberg, Martin G.}, title = {Thermodynamics of oxygen in the copper-antimony system at 1473K}, series = {Erzmetall : Rohstoffgewinnung, Verarbeitung, Recycling, Umwelttechnik}, volume = {41}, journal = {Erzmetall : Rohstoffgewinnung, Verarbeitung, Recycling, Umwelttechnik}, number = {10}, issn = {0044-2658}, pages = {498 -- 501}, year = {1988}, language = {en} } @article{WangAnikFrohberg1987, author = {Wang, Mao and Anik, Sabri and Frohberg, Martin G.}, title = {Thermodynamics of oxygen in the lead-antimony system at 1173 K}, series = {Erzmetall : Rohstoffgewinnung, Verarbeitung, Recycling, Umwelttechnik}, volume = {40}, journal = {Erzmetall : Rohstoffgewinnung, Verarbeitung, Recycling, Umwelttechnik}, number = {6}, issn = {0044-2658}, pages = {316 -- 319}, year = {1987}, language = {en} } @article{DiltheyBrandenburgSchleser2004, author = {Dilthey, Ulrich and Brandenburg, Annette and Schleser, Markus}, title = {Dispensing and application of unfilled adhesives in the micro range}, series = {Welding and cutting. 3 (2004), H. 4}, journal = {Welding and cutting. 3 (2004), H. 4}, issn = {1612-3433}, pages = {250 -- 254}, year = {2004}, language = {en} } @article{ReisgenSchleserMokrovetal.2012, author = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Ahmed, Essam}, title = {Statistical modeling of laser welding of DP/TRIP steel sheets}, series = {Optics and laser technology}, volume = {44}, journal = {Optics and laser technology}, number = {1}, publisher = {Elsevier}, address = {Amsterdam}, issn = {1879-2545 (E-Journal); 0030-3992 (Print); 0308-4280 (Print)}, doi = {10.1016/j.optlastec.2011.05.025}, pages = {92 -- 101}, year = {2012}, abstract = {In this research work, a statistical analysis of the CO2 laser beam welding of dual phase (DP600)/transformation induced plasticity (TRIP700) steel sheets was done using response surface methodology. The analysis considered the effect of laser power (2-2.2 kW), welding speed (40-50 mm/s) and focus position (-1 to 0 mm) on the heat input, the weld bead geometry, uniaxial tensile strength, formability limited dome height and welding operation cost. The experimental design was based on Box-Behnken design using linear and quadratic polynomial equations for predicting the mathematical models. The results indicate that the proposed models predict the responses adequately within the limits of welding parameters being used and the welding speed is the most significant parameter during the welding process.}, language = {en} } @article{ReisgenSchleserMokrovetal.2012, author = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Ahmed, Essam}, title = {Optimization of laser welding of DP/TRIP steel sheets using statistical approach}, series = {Optics and laser technology}, volume = {44}, journal = {Optics and laser technology}, number = {1}, publisher = {Elsevier}, address = {Amsterdam}, issn = {1879-2545 (E-Journal); 0030-3992 (Print); 0308-4280 (Print)}, doi = {10.1016/j.optlastec.2011.06.028}, pages = {255 -- 262}, year = {2012}, abstract = {Generally, the quality of a weld joint is directly influenced by the welding input parameter settings. Selection of proper process parameters is important to obtain the desired weld bead profile and quality. In this research work, numerical and graphical optimization techniques of the CO2 laser beam welding of dual phase (DP600)/transformation induced plasticity (TRIP700) steel sheets were carried out using response surface methodology (RSM) based on Box-Behnken design. The procedure was established to improve the weld quality, increase the productivity and minimize the total operation cost by considering the welding parameters range of laser power (2-2.2 kW), welding speed (40-50 mm/s) and focus position (-1 to 0 mm). It was found that, RSM can be considered as a powerful tool in experimental welding optimization, even when the experimenter does not have a model for the process. Strong, efficient and low cost weld joints could be achieved using the optimum welding conditions.}, language = {en} } @article{ReisgenOlschokJakobsetal.2012, author = {Reisgen, Uwe and Olschok, Simon and Jakobs, Stefan and Schleser, Markus and Mokrov, Oleg and Rossiter, Eduardo}, title = {Laser beam submerged arc hybrid welding}, series = {Physics procedia}, volume = {39}, journal = {Physics procedia}, publisher = {Elsevier}, address = {Amsterdam}, issn = {1875-3892}, doi = {10.1016/j.phpro.2012.10.016}, pages = {75 -- 83}, year = {2012}, abstract = {The laser beam-submerged arc hybrid welding method originates from the knowledge that, with increasing penetration depth, the laser beam process has a tendency to pore formation in the lower weld regions. The coupling with the energy-efficient submerged-arc process improves degassing and reduces the tendency to pore formation. The high deposition rate of the SA process in combination with the laser beam process offers, providing the appropriate choice of weld preparation, the possibility of welding plates with a thickness larger than 20° mm in a single pass, and also of welding thicker plates with the double-sided single pass technique.}, language = {en} } @article{ReisgenSchleserAbdurakhmanovetal.2012, author = {Reisgen, Uwe and Schleser, Markus and Abdurakhmanov, Aydemir and Gumenyuk, Andrey}, title = {Measuring of plasma properties induced by non-vacuum electron beam welding}, series = {Physics of plasma}, volume = {19}, journal = {Physics of plasma}, number = {1}, publisher = {AIP Publishing}, address = {Melville, NY}, issn = {1089-7674 (E-Journal); 1070-664X (Print)}, doi = {10.1063/1.3675874}, pages = {1 -- 7}, year = {2012}, abstract = {Electron beam plasma measurement was realised by means of DIABEAM system invented by ISF RWTH Aachen. The Langmuir probe method is used for measurement. The relative simplicity of the method and the possibility of dispersion of high power on the probe allow its application for the investigation of high-power electron beams. The key element of the method is a rotating thin tungsten wire, which intersects the beam transversely on its axis and collects part of the current by itself. The signals, which are registered in the DIABEAM as a voltage, were taken in the form of amplitude. The conversion of the probe current into the distribution along the beam radius was realised using the Abel's method. A voltage-current characteristic was built for the beam current. The local electron density as well as the electron temperature, the floating potential and the plasma potential were measured and calculated by means of this characteristic.}, language = {en} } @article{MukherjeeRamazaniYangetal.2011, author = {Mukherjee, Krishnendu and Ramazani, Ali and Yang, Li and Prahl, Ulrich and Bleck, Wolfgang and Reisgen, Uwe and Schleser, Markus and Abdurakhmanov, Aydemir}, title = {Characterization of gas metal arc welded hot rolled DP600 steel}, series = {Steel research international}, volume = {Vol. 82}, journal = {Steel research international}, number = {Iss. 12}, publisher = {Wiley}, address = {Weinheim}, issn = {1869-344X (E-Book); 1611-3683 (Print)}, pages = {1408 -- 1416}, year = {2011}, language = {en} } @article{GlowaniaGriesSchoeneetal.2011, author = {Glowania, Michael and Gries, Thomas and Schoene, Jens and Schleser, Markus and Reisgen, Uwe}, title = {Innovative coating technology for textile reinforcements of concrete applications}, series = {13th International Congress on Polymers in Concrete : 10 - 12 February 2010, Funchal, Madeira, Portugal.(Key engineering materials. Vol. 466)}, journal = {13th International Congress on Polymers in Concrete : 10 - 12 February 2010, Funchal, Madeira, Portugal.(Key engineering materials. Vol. 466)}, publisher = {Trans Tech Publications}, address = {B{\"a}ch}, organization = {International Congress Polymers in Concrete <13, 2010, Funchal, Madeira>}, isbn = {978-3-03785-008-4}, issn = {1013-9826 (E-Journal) ; 0252-1059 (Print)}, pages = {167 -- 173}, year = {2011}, language = {en} } @article{ReisgenSchleserMokrovetal.2011, author = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Ahmed, Essam}, title = {Numerical and experimental investigation of tensile behavior of laser beam welded TRIP700 steel}, series = {ISIJ international}, volume = {Vol. 51}, journal = {ISIJ international}, number = {No. 3}, publisher = {ISIJ}, address = {Tōkyō}, organization = {Iron and Steel Institute of Japan (ISIJ)}, issn = {1347-5460 (E-Journal); 0915-1559 (Print)}, pages = {429 -- 434}, year = {2011}, language = {en} } @article{RoesnerScheikOlowinskyetal.2011, author = {Roesner, Andreas and Scheik, Sven and Olowinsky, Alexander and Gillner, Arnold and Propawe, Reinhart and Schleser, Markus and Reisgen, Uwe}, title = {Innovative approach of joining hybrid components}, series = {Journal of laser applications}, volume = {Vol. 23}, journal = {Journal of laser applications}, number = {Iss. 3}, publisher = {Laser Institute of America}, address = {Orlando, Fla.}, issn = {1042-346X}, pages = {32007}, year = {2011}, language = {en} } @article{RoesnerScheikOlowinskyetal.2011, author = {Roesner, Andreas and Scheik, Sven and Olowinsky, Alexander and Gillner, Arnold and Reisgen, Uwe and Schleser, Markus}, title = {Laser assisted joining of plastic metal hybrids}, series = {Lasers in manufacturing 2011 : proceedings of the sixth International WLT Conference on Lasers in Manufacturing, Munich, May 23 - 26 2011. (Physics procedia ; Vol. 12 (2011), Part B)}, journal = {Lasers in manufacturing 2011 : proceedings of the sixth International WLT Conference on Lasers in Manufacturing, Munich, May 23 - 26 2011. (Physics procedia ; Vol. 12 (2011), Part B)}, publisher = {Elsevier}, address = {Amsterdam}, organization = {International WLT Conference on Lasers in Manufacturing <6, M{\"u}nchen, 2011>}, issn = {1875-3892 (E-Journal); 1875-3884 (Print)}, pages = {370 -- 377}, year = {2011}, language = {en} } @article{ReisgenSchleserMokrovetal.2011, author = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Zabirov, Alexander}, title = {Virtual welding equipment for simulation of GMAW processes with integration of power source regulation}, series = {Frontiers of materials science}, volume = {Vol. 5}, journal = {Frontiers of materials science}, number = {Iss. 2}, publisher = {Springer}, address = {Berlin}, issn = {2095-0268 (E-Journal); 2095-025X (Print)}, pages = {79 -- 89}, year = {2011}, language = {en} } @article{SchleserWalkLaufferRaupachetal.2006, author = {Schleser, Markus and Walk-Lauffer, Bernd and Raupach, Michael and Dilthey, Ulrich}, title = {Application of polymers for textile-reinforced concrete}, series = {Journal of materials in civil engineering : properties, applications, durability}, volume = {18}, journal = {Journal of materials in civil engineering : properties, applications, durability}, number = {5}, issn = {0899-1561}, pages = {670 -- 676}, year = {2006}, language = {en} } @article{FeldmannPakGessleretal.2006, author = {Feldmann, Markus and Pak, Daniel and Geßler, Achim and Dilthey, Ulrich and Schleser, Markus}, title = {Bonded connections for textile reinforced concrete structures}, series = {Cailiao-gongcheng = Journal of materials engineering}, journal = {Cailiao-gongcheng = Journal of materials engineering}, number = {Special iss.}, issn = {1001-4381}, pages = {123 -- 127}, year = {2006}, language = {en} } @article{DiltheySchleserFeldmannetal.2008, author = {Dilthey, Ulrich and Schleser, Markus and Feldmann, Martin and Pak, Daniel and Geßler, Achim}, title = {Investigation of punctiform, plane and hybrid joints of textile-reinforced concrete parts}, series = {Cement and concrete composites}, volume = {Vol. 30}, journal = {Cement and concrete composites}, number = {iss. 2}, issn = {0958-9465}, pages = {82 -- 87}, year = {2008}, language = {en} } @article{ReisgenSchleserMokrovetal.2012, author = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Zabirov, Alexander and F{\"u}ssel, Uwe and Schnick, Michael and Hertel, Martin and Jaeckel, Sebastian}, title = {Modelling and visualisation of the GMA process}, series = {Welding and Cutting}, volume = {11}, journal = {Welding and Cutting}, number = {4}, publisher = {DVS Verlag}, address = {D{\"u}sseldorf}, issn = {1612-3433}, pages = {242 -- 249}, year = {2012}, language = {en} } @article{RamazaniLiMukherjeeetal.2013, author = {Ramazani, Ali and Li, Yang and Mukherjee, Krishnendu and Prahl, Ulrich and Bleck, Wolfgang and Abdurakhmanov, Aydemir and Schleser, Markus and Reisgen, Uwe}, title = {Microstructure evolution simulation in hot rolled DP600 steel during gas metal arc welding}, series = {Computational materials science}, volume = {Vol. 68}, journal = {Computational materials science}, publisher = {Elsevier}, address = {Amsterdam}, issn = {1879-0801 (E-Book); 0927-0256 (Print)}, pages = {107 -- 116}, year = {2013}, language = {en} } @article{HoetterFateriGebhardt2012, author = {H{\"o}tter, Jan-Steffen and Fateri, Miranda and Gebhardt, Andreas}, title = {Selective laser melting of metals: desktop machines open up new chances even for small companies}, series = {Advanced materials research}, volume = {622-623}, journal = {Advanced materials research}, publisher = {Trans Tech Publ.}, address = {Baech}, issn = {1662-8985 (E-Journal); 1022-6680 (Print)}, doi = {10.4028/www.scientific.net/AMR.622-623.461}, pages = {461 -- 465}, year = {2012}, abstract = {Additive manufacturing (AM) of metal parts by using Selective Laser Melting (SLM) has become a powerful tool mostly in the area of automotive, aerospace engineering and others. Especially in the field of dentistry, jewelry and related branches that require individualized or even one-of-a-kind products, the direct digital manufacturing process opens up new ways of design and manufacturing. In these fields, mostly small and medium sized businesses (SME) are operating which do not have sufficient human and economic resources to invest in this technology. But to stay competitive, the application of AM can be regarded as a necessity. In this situation a new desktop machine (Realizer SLM 50) was introduced that cost about 1/3 of a shop floor SLM machine and promises small quality parts. To find out whether the machine really is an alternative for SMEs the University of Applied Science, Aachen, Germany, designed, build and optimized typical parts from the dentistry and the jewelry branches using CoCr and silver material, the latter being new with this application. The paper describes the SLM procedure and how to find and optimize the most important parameters. The test is accompanied by digital simulation in order to verify the build parameters and to plan future builds. The procedure is shown as well as the resulting parts made from CoCr and silver material.}, language = {en} } @article{FateriGebhardtThuemmleretal.2014, author = {Fateri, Miranda and Gebhardt, Andreas and Th{\"u}mmler, Stefan and Thurn, Laura}, title = {Experimental investigation on selective laser melting of glass}, series = {Physics procedia : 8th International Conference on Laser Assisted Net Shape Engineering LANE 2014}, volume = {56 (2014)}, journal = {Physics procedia : 8th International Conference on Laser Assisted Net Shape Engineering LANE 2014}, publisher = {Elsevier}, address = {Amsterdam}, issn = {1875-3892 (E-Journal); 1875-3884 (Print)}, doi = {10.1016/j.phpro.2014.08.118}, pages = {357 -- 364}, year = {2014}, language = {en} } @article{PfaffBurnham2009, author = {Pfaff, Raphael and Burnham, Keith J.}, title = {On abstraction and interpretability: a behavioural perspective}, series = {Systems Science}, volume = {Vol. 35}, journal = {Systems Science}, number = {Iss. 2}, issn = {0137-1223}, pages = {19 -- 26}, year = {2009}, language = {en} } @article{SeilerPichlerPfaffetal.2009, author = {Seiler, Friedrich and Pichler, Alexander and Pfaff, Raphael and Srulijes, Julio}, title = {Novel processing tools for automated doppler picture velocimetry (DPV) evaluation}, series = {Journal of visualization}, volume = {Vol. 12}, journal = {Journal of visualization}, number = {Iss. 4}, issn = {1343-8875}, pages = {323 -- 337}, year = {2009}, language = {en} } @article{FateriGebhardt2015, author = {Fateri, Miranda and Gebhardt, Andreas}, title = {Selective Laser Melting of Soda-Lime Glass Powder}, series = {International Journal of Applied Ceramic Technology}, volume = {12}, journal = {International Journal of Applied Ceramic Technology}, number = {1}, publisher = {Wiley-Blackwell}, address = {Oxford}, issn = {1744-7402}, doi = {10.1111/ijac.12338}, pages = {53 -- 61}, year = {2015}, language = {en} } @article{FateriGebhardt2015, author = {Fateri, Miranda and Gebhardt, Andreas}, title = {Process Parameters Development of Selective Laser Melting of Lunar Regolith for On-Site Manufacturing Applications}, series = {International Journal of Applied Ceramic Technology}, volume = {12}, journal = {International Journal of Applied Ceramic Technology}, number = {1}, publisher = {Wiley-Blackwell}, address = {Oxford}, isbn = {1744-7402}, doi = {10.1111/ijac.12326}, pages = {46 -- 52}, year = {2015}, language = {en} } @article{LeidingerNoistenWollert2012, author = {Leidinger, Rafael and Noisten, Thomas and Wollert, J{\"o}rg}, title = {Realtime automation networks in moVing industrial environments}, series = {Journal of systemics, cybernetics and informatics}, volume = {Vol. 10}, journal = {Journal of systemics, cybernetics and informatics}, number = {Iss. 2}, publisher = {IIIC}, address = {Orlando}, issn = {1690-4532}, pages = {52 -- 56}, year = {2012}, abstract = {The radio-based wireless data communication has made the realization of new technical solutions possible in many fields of the automation technology (AT). For about ten years, a constant disproportionate growth of wireless technologies can be observed in the automation technology. However, it shows that especially for the AT, conventional technologies of office automation are unsuitable and/or not manageable. The employment of mobile services in the industrial automation technology has the potential of significant cost and time savings. This leads to an increased productivity in various fields of the AT, for example in the factory and process automation or in production logistics. In this paper technologies and solutions for an automation-suited supply of mobile wireless services will be introduced under the criteria of real time suitability, IT-security and service orientation. Emphasis will be put on the investigation and development of wireless convergence layers for different radio technologies, on the central provision of support services for an easy-to-use, central, backup enabled management of combined wired / wireless networks and on the study on integrability in a Profinet real-time Ethernet network.}, language = {en} } @article{FateriGebhardt2015, author = {Fateri, Miranda and Gebhardt, Andreas}, title = {Additive manufactured mechanical disentanglement lock}, series = {RTejournal - Forum f{\"u}r Rapid Technologie}, volume = {12}, journal = {RTejournal - Forum f{\"u}r Rapid Technologie}, publisher = {Fachhochschule Aachen}, address = {Aachen}, issn = {1614-0923}, url = {http://nbn-resolving.de/urn:nbn:de:0009-2-42147}, year = {2015}, language = {en} } @article{KesslerBalcGebhardtetal.2015, author = {Kessler, Julia and Balc, Nicolae and Gebhardt, Andreas and Abbas, Karim}, title = {Basic Research on Lattice Structures Focused on the Tensile Strength}, series = {Applied Mechanics and Materials}, volume = {Vol. 808}, journal = {Applied Mechanics and Materials}, publisher = {Trans Tech Publications}, address = {B{\"a}ch}, issn = {1662-7482}, doi = {10.4028/www.scientific.net/AMM.808.193}, pages = {193 -- 198}, year = {2015}, language = {en} } @article{KosterScheidweilerTieves2016, author = {Koster, Arie and Scheidweiler, Robert and Tieves, Martin}, title = {A flow based pruning scheme for enumerative equitable coloring algorithms}, series = {A flow based pruning scheme for enumerative equitable coloring algorithms}, journal = {A flow based pruning scheme for enumerative equitable coloring algorithms}, doi = {10.48550/arXiv.1607.08754}, pages = {1 -- 30}, year = {2016}, abstract = {An equitable graph coloring is a proper vertex coloring of a graph G where the sizes of the color classes differ by at most one. The equitable chromatic number is the smallest number k such that G admits such equitable k-coloring. We focus on enumerative algorithms for the computation of the equitable coloring number and propose a general scheme to derive pruning rules for them: We show how the extendability of a partial coloring into an equitable coloring can be modeled via network flows. Thus, we obtain pruning rules which can be checked via flow algorithms. Computational experiments show that the search tree of enumerative algorithms can be significantly reduced in size by these rules and, in most instances, such naive approach even yields a faster algorithm. Moreover, the stability, i.e., the number of solved instances within a given time limit, is greatly improved. Since the execution of flow algorithms at each node of a search tree is time consuming, we derive arithmetic pruning rules (generalized Hall-conditions) from the network model. Adding these rules to an enumerative algorithm yields an even larger runtime improvement.}, language = {en} } @article{BeckenbachScheidweiler2016, author = {Beckenbach, Isabel and Scheidweiler, Robert}, title = {Perfect ƒ-Matchings and ƒ-Factors in Hypergraphs - A Combinatorial Approach}, series = {Discrete Mathematics}, volume = {240}, journal = {Discrete Mathematics}, number = {10}, publisher = {Elsevier}, address = {Amsterdam}, issn = {2192-7782}, doi = {10.1016/j.disc.2017.05.005}, pages = {2499 -- 2506}, year = {2016}, abstract = {We prove characterizations of the existence of perfect ƒ-matchings in uniform mengerian and perfect hypergraphs. Moreover, we investigate the ƒ-factor problem in balanced hypergraphs. For uniform balanced hypergraphs we prove two existence theorems with purely combinatorial arguments, whereas for non-uniform balanced hypergraphs we show that the ƒ-factor problem is NP-hard.}, language = {en} } @article{ScheidweilerTriesch2016, author = {Scheidweiler, Robert and Triesch, Eberhard}, title = {A note on the duality between matchings and vertex covers in balanced hypergraphs}, series = {Journal of Combinatorial Optimization}, volume = {32}, journal = {Journal of Combinatorial Optimization}, number = {2}, publisher = {Springer}, address = {Berlin}, issn = {1573-2886}, doi = {10.1007/s10878-015-9887-5}, pages = {639 -- 644}, year = {2016}, abstract = {We present a new Min-Max theorem for an optimization problem closely connected to matchings and vertex covers in balanced hypergraphs. The result generalizes Kőnig's Theorem (Berge and Las Vergnas in Ann N Y Acad Sci 175:32-40, 1970; Fulkerson et al. in Math Progr Study 1:120-132, 1974) and Hall's Theorem (Conforti et al. in Combinatorica 16:325-329, 1996) for balanced hypergraphs.}, language = {en} } @article{KilicRaatschenKoerfgenetal.2017, author = {Kilic, S. A. and Raatschen, Hans-J{\"u}rgen and K{\"o}rfgen, B. and Apaydin, N. M. and Astaneh-Asl, A.}, title = {FE Model of the Fatih Sultan Mehmet Suspension Bridge Using Thin Shell Finite Elements}, series = {Arabian Journal for Science and Engineering}, volume = {42}, journal = {Arabian Journal for Science and Engineering}, number = {3}, publisher = {Springer Nature}, issn = {2191-4281}, doi = {10.1007/s13369-016-2316-y}, pages = {1103 -- 1116}, year = {2017}, abstract = {This paper presents the results of an eigenvalue analysis of the Fatih Sultan Mehmet Bridge. A high-resolution finite element model was created directly from the available design documents. All physical properties of the structural components were included in detail, so no calibration to the measured data was necessary. The deck and towers were modeled with shell elements. A nonlinear static analysis was performed before the eigenvalue calculation. The calculated natural frequencies and corresponding mode shapes showed good agreement with the available measured ambient vibration data. The calculation of the effective modal mass showed that nine modes had single contributions higher than 5 \% of the total mass. They were in a frequency range up to 1.2 Hz. The comparison of the results for the torsional modes especially demonstrated the advantage of using thin shell finite elements over the beam modeling approach.}, language = {en} } @article{RieperGebhardtStucker2016, author = {Rieper, Harald and Gebhardt, Andreas and Stucker, Brent}, title = {Selective Laser Melting of the Eutectic Silver-Copper Alloy Ag 28 wt \% Cu}, series = {RTejournal - Forum f{\"u}r Rapid Technologie}, volume = {13}, journal = {RTejournal - Forum f{\"u}r Rapid Technologie}, issn = {1614-0923}, url = {http://nbn-resolving.de/nbn:de:0009-2-44141}, year = {2016}, abstract = {The aim of this work was to perform a detailed investigation of the use of Selective Laser Melting (SLM) technology to process eutectic silver-copper alloy Ag 28 wt. \% Cu (also called AgCu28). The processing occurred with a Realizer SLM 50 desktop machine. The powder analysis (SEM-topography, EDX, particle distribution) was reported as well as the absorption rates for the near-infrared (NIR) spectrum. Microscope imaging showed the surface topography of the manufactured parts. Furthermore, microsections were conducted for the analysis of porosity. The Design of Experiments approach used the response surface method in order to model the statistical relationship between laser power, spot distance and pulse time.}, language = {en} } @article{HaagZontarSchleupenetal.2014, author = {Haag, S. and Zontar, D. and Schleupen, Josef and M{\"u}ller, T. and Brecher, C.}, title = {Chain of refined perception in self-optimizing assembly of micro-optical systems}, series = {Journal of sensors and sensor systems}, volume = {3}, journal = {Journal of sensors and sensor systems}, number = {1}, publisher = {Copernicus Publ.}, address = {G{\"o}ttingen}, issn = {2194-878X}, doi = {10.5194/jsss-3-87-2014}, pages = {87 -- 95}, year = {2014}, abstract = {Today, the assembly of laser systems requires a large share of manual operations due to its complexity regarding the optimal alignment of optics. Although the feasibility of automated alignment of laser optics has been shown in research labs, the development effort for the automation of assembly does not meet economic requirements - especially for low-volume laser production. This paper presents a model-based and sensor-integrated assembly execution approach for flexible assembly cells consisting of a macro-positioner covering a large workspace and a compact micromanipulator with camera attached to the positioner. In order to make full use of available models from computer-aided design (CAD) and optical simulation, sensor systems at different levels of accuracy are used for matching perceived information with model data. This approach is named "chain of refined perception", and it allows for automated planning of complex assembly tasks along all major phases of assembly such as collision-free path planning, part feeding, and active and passive alignment. The focus of the paper is put on the in-process image-based metrology and information extraction used for identifying and calibrating local coordinate systems as well as the exploitation of that information for a part feeding process for micro-optics. Results will be presented regarding the processes of automated calibration of the robot camera as well as the local coordinate systems of part feeding area and robot base.}, language = {en} } @article{MichauxMatternKallweit2018, author = {Michaux, F. and Mattern, P. and Kallweit, Stephan}, title = {RoboPIV: how robotics enable PIV on a large industrial scale}, series = {Measurement Science and Technology}, volume = {29}, journal = {Measurement Science and Technology}, number = {7}, publisher = {IOP}, address = {Bristol}, issn = {1361-6501}, doi = {10.1088/1361-6501/aab5c1}, pages = {074009}, year = {2018}, abstract = {This work demonstrates how the interaction between particle image velocimetry (PIV) and robotics can massively increase measurement efficiency. The interdisciplinary approach is shown using the complex example of an automated, large scale, industrial environment: a typical automotive wind tunnel application. Both the high degree of flexibility in choosing the measurement region and the complete automation of stereo PIV measurements are presented. The setup consists of a combination of three robots, individually used as a 6D traversing unit for the laser illumination system as well as for each of the two cameras. Synchronised movements in the same reference frame are realised through a master-slave setup with a single interface to the user. By integrating the interface into the standard wind tunnel management system, a single measurement plane or a predefined sequence of several planes can be requested through a single trigger event, providing the resulting vector fields within minutes. In this paper, a brief overview on the demands of large scale industrial PIV and the existing solutions is given. Afterwards, the concept of RoboPIV is introduced as a new approach. In a first step, the usability of a selection of commercially available robot arms is analysed. The challenges of pose uncertainty and importance of absolute accuracy are demonstrated through comparative measurements, explaining the individual pros and cons of the analysed systems. Subsequently, the advantage of integrating RoboPIV directly into the existing wind tunnel management system is shown on basis of a typical measurement sequence. In a final step, a practical measurement procedure, including post-processing, is given by using real data and results. Ultimately, the benefits of high automation are demonstrated, leading to a drastic reduction in necessary measurement time compared to non-automated systems, thus massively increasing the efficiency of PIV measurements.}, language = {en} } @article{KunkelGebhardtMpofuetal.2018, author = {Kunkel, Maximilian Hugo and Gebhardt, Andreas and Mpofu, Khumbaulani and Kallweit, Stephan}, title = {Statistical assessment of mechanical properties of selective laser melted specimens of stainless steel}, series = {The International Journal of Advanced Manufacturing Technology}, volume = {98}, journal = {The International Journal of Advanced Manufacturing Technology}, number = {5-8}, publisher = {Springer}, address = {London}, issn = {0268-3768}, doi = {10.1007/s00170-018-2040-8}, pages = {1409 -- 1431}, year = {2018}, abstract = {The rail business is challenged by long product life cycles and a broad spectrum of assembly groups and single parts. When spare part obsolescence occurs, quick solutions are needed. A reproduction of obsolete parts is often connected to long waiting times and minimum lot quantities that need to be purchased and stored. Spare part storage is therefore challenged by growing stocks, bound capital and issues of part ageing. A possible solution could be a virtual storage of spare parts which will be 3D printed through additive manufacturing technologies in case of sudden demand. As mechanical properties of additive manufactured parts are neither guaranteed by machine manufacturers nor by service providers, the utilization of this relatively young technology is impeded and research is required to address these issues. This paper presents an examination of mechanical properties of specimens manufactured from stainless steel through the selective laser melting (SLM) process. The specimens were produced in multiple batches. This paper interrogates the question if the test results follow a normal distribution pattern and if mechanical property predictions can be made. The results will be put opposite existing threshold values provided as the industrial standard. Furthermore, probability predictions will be made in order to examine the potential of the SLM process to maintain state-of-the-art mechanical property requirements.}, language = {en} } @article{FranzenPindersPfaffetal.2018, author = {Franzen, Julius and Pinders, Erik and Pfaff, Raphael and Enning, Manfred}, title = {RailCrowd's virtual fleets: Make most of your asset data}, series = {Deine Bahn}, journal = {Deine Bahn}, number = {9}, publisher = {Bahn-Fachverlag}, address = {Berlin}, issn = {0948-7263}, pages = {11 -- 13}, year = {2018}, abstract = {For smaller railway operators or those with a diverse fleet, it can be difficult to collect sufficient data to improve maintenance programs. At the same time, new rules such as entity in charge of maintenance - ECM - regulations impose an additional workload by requiring a dedicated maintenance management system and specific reports. The RailCrowd platform sets out to facilitate compliance with ECM and similar regulations while at the same time pooling anonymised fleet data across operators to form virtual fleets, providing greater data insights.}, language = {en} } @article{BucurLazarescuPopetal.2019, author = {Bucur, Alexandru and Lazarescu, Lucian and Pop, Grigore Marian and Achimas, Gheorghe and Gebhardt, Andreas}, title = {Tribological performance of biodegradable lubricants under different surface roughness of tools}, series = {Academic Journal of Manufacturing Engineering}, volume = {17}, journal = {Academic Journal of Manufacturing Engineering}, number = {1}, issn = {1583-7904}, pages = {172 -- 178}, year = {2019}, language = {en} } @article{PancContiuBocanetetal.2019, author = {Panc, Nicolae and Contiu, Glad and Bocanet, Vlad and Thurn, Laura and Sabau, Emilia}, title = {The influence of cutting technology on surface wear hardness}, series = {Academic Journal of Manufacturing Engineering}, volume = {17}, journal = {Academic Journal of Manufacturing Engineering}, number = {3}, issn = {1583-7904}, pages = {205 -- 210}, year = {2019}, language = {en} } @article{UlmerBraunChengetal.2020, author = {Ulmer, Jessica and Braun, Sebastian and Cheng, Chi-Tsun and Dowey, Steve and Wollert, J{\"o}rg}, title = {Human-Centered Gamification Framework for Manufacturing Systems}, series = {Procedia CIRP}, volume = {93}, journal = {Procedia CIRP}, publisher = {Elsevier}, address = {Amsterdam}, issn = {2212-8271}, doi = {10.1016/j.procir.2020.04.076}, pages = {670 -- 675}, year = {2020}, abstract = {While bringing new opportunities, the Industry 4.0 movement also imposes new challenges to the manufacturing industry and all its stakeholders. In this competitive environment, a skilled and engaged workforce is a key to success. Gamification can generate valuable feedbacks for improving employees' engagement and performance. Currently, Gamification in workspaces focuses on computer-based assignments and training, while tasks that require manual labor are rarely considered. This research provides an overview of Enterprise Gamification approaches and evaluates the challenges. Based on that, a skill-based Gamification framework for manual tasks is proposed, and a case study in the Industry 4.0 model factory is shown.}, language = {en} } @article{WollbrinkMasloZimmeretal.2020, author = {Wollbrink, Moritz and Maslo, Semir and Zimmer, Daniel and Abbas, Karim and Arntz, Kristian and Bergs, Thomas}, title = {Clamping and substrate plate system for continuous additive build-up and post-processing of metal parts}, series = {Procedia CIRP}, volume = {93}, journal = {Procedia CIRP}, publisher = {Elsevier}, address = {Amsterdam}, issn = {2212-8271}, doi = {10.1016/j.procir.2020.04.015}, pages = {108 -- 113}, year = {2020}, abstract = {The manufacturing share of laser powder bed fusion (L-PBF) increases in industrial application, but still many process steps are manually operated. Additionally, it is not possible to achieve tight dimensional tolerances or low surfaces roughness. Hence, a process chain has to be set up to combine additive manufacturing (AM) with further machining technologies. To achieve a continuous workpiece flow as basis for further industrialization of L-PBF, the paper presents a novel substrate system and its application on L-PBF machines and post-processing. The substrate system consists of a zero-point clamping system and a matrix-like interface of contact pins to be substantially connected to the workpiece within the L-PBF process.}, language = {en} } @article{FrankoDuKallweitetal.2020, author = {Franko, Josef and Du, Shengzhi and Kallweit, Stephan and Duelberg, Enno Sebastian and Engemann, Heiko}, title = {Design of a Multi-Robot System for Wind Turbine Maintenance}, series = {Energies}, volume = {13}, journal = {Energies}, number = {10}, publisher = {MDPI}, address = {Basel}, issn = {1996-1073}, doi = {10.3390/en13102552}, pages = {Article 2552}, year = {2020}, abstract = {The maintenance of wind turbines is of growing importance considering the transition to renewable energy. This paper presents a multi-robot-approach for automated wind turbine maintenance including a novel climbing robot. Currently, wind turbine maintenance remains a manual task, which is monotonous, dangerous, and also physically demanding due to the large scale of wind turbines. Technical climbers are required to work at significant heights, even in bad weather conditions. Furthermore, a skilled labor force with sufficient knowledge in repairing fiber composite material is rare. Autonomous mobile systems enable the digitization of the maintenance process. They can be designed for weather-independent operations. This work contributes to the development and experimental validation of a maintenance system consisting of multiple robotic platforms for a variety of tasks, such as wind turbine tower and rotor blade service. In this work, multicopters with vision and LiDAR sensors for global inspection are used to guide slower climbing robots. Light-weight magnetic climbers with surface contact were used to analyze structure parts with non-destructive inspection methods and to locally repair smaller defects. Localization was enabled by adapting odometry for conical-shaped surfaces considering additional navigation sensors. Magnets were suitable for steel towers to clamp onto the surface. A friction-based climbing ring robot (SMART— Scanning, Monitoring, Analyzing, Repair and Transportation) completed the set-up for higher payload. The maintenance period could be extended by using weather-proofed maintenance robots. The multi-robot-system was running the Robot Operating System (ROS). Additionally, first steps towards machine learning would enable maintenance staff to use pattern classification for fault diagnosis in order to operate safely from the ground in the future.}, language = {en} } @article{RaffeisAdjeiKyeremehVroomenetal.2020, author = {Raffeis, Iris and Adjei-Kyeremeh, Frank and Vroomen, Uwe and Westhoff, Elmar and Bremen, Sebastian and Hohoi, Alexandru and B{\"u}hrig-Polaczek, Andreas}, title = {Qualification of a Ni-Cu alloy for the laser powder bed fusion process (LPBF): Its microstructure and mechanical properties}, series = {Applied Sciences}, volume = {10}, journal = {Applied Sciences}, number = {Art. 3401}, publisher = {MDPI}, address = {Basel}, issn = {2076-3417}, doi = {10.3390/app10103401}, pages = {1 -- 15}, year = {2020}, abstract = {As researchers continue to seek the expansion of the material base for additive manufacturing, there is a need to focus attention on the Ni-Cu group of alloys which conventionally has wide industrial applications. In this work, the G-NiCu30Nb casting alloy, a variant of the Monel family of alloys with Nb and high Si content is, for the first time, processed via the laser powder bed fusion process (LPBF). Being novel to the LPBF processes, optimum LPBF parameters were determined, and hardness and tensile tests were performed in as-built conditions and after heat treatment at 1000 °C. Microstructures of the as-cast and the as-built condition were compared. Highly dense samples (99.8\% density) were achieved after varying hatch distance (80 µm and 140 µm) with scanning speed (550 mm/s-1500 mm/s). There was no significant difference in microhardness between varied hatch distance print sets. Microhardness of the as-built condition (247 HV0.2) exceeded the as-cast microhardness (179 HV0.2.). Tensile specimens built in vertical (V) and horizontal (H) orientations revealed degrees of anisotropy and were superior to conventionally reported figures. Post heat treatment increased ductility from 20\% to 31\% (V), as well as from 16\% to 25\% (H), while ultimate tensile strength (UTS) and yield strength (YS) were considerably reduced.}, language = {en} } @article{KunkelGebhardtMpofuetal.2019, author = {Kunkel, Maximilian Hugo and Gebhardt, Andreas and Mpofu, Khumbulani and Kallweit, Stephan}, title = {Quality assurance in metal powder bed fusion via deep-learning-based image classification}, series = {Rapid Prototyping Journal}, volume = {26}, journal = {Rapid Prototyping Journal}, number = {2}, issn = {1355-2546}, doi = {10.1108/RPJ-03-2019-0066}, pages = {259 -- 266}, year = {2019}, language = {en} } @article{BraunChengDoweyetal.2021, author = {Braun, Sebastian and Cheng, Chi-Tsun and Dowey, Steve and Wollert, J{\"o}rg}, title = {Performance evaluation of skill-based order-assignment in production environments with multi-agent systems}, series = {IEEE Journal of Emerging and Selected Topics in Industrial Electronics}, journal = {IEEE Journal of Emerging and Selected Topics in Industrial Electronics}, number = {Early Access}, publisher = {IEEE}, address = {New York}, issn = {2687-9735}, doi = {10.1109/JESTIE.2021.3108524}, year = {2021}, abstract = {The fourth industrial revolution introduces disruptive technologies to production environments. One of these technologies are multi-agent systems (MASs), where agents virtualize machines. However, the agent's actual performances in production environments can hardly be estimated as most research has been focusing on isolated projects and specific scenarios. We address this gap by implementing a highly connected and configurable reference model with quantifiable key performance indicators (KPIs) for production scheduling and routing in single-piece workflows. Furthermore, we propose an algorithm to optimize the search of extrema in highly connected distributed systems. The benefits, limits, and drawbacks of MASs and their performances are evaluated extensively by event-based simulations against the introduced model, which acts as a benchmark. Even though the performance of the proposed MAS is, on average, slightly lower than the reference system, the increased flexibility allows it to find new solutions and deliver improved factory-planning outcomes. Our MAS shows an emerging behavior by using flexible production techniques to correct errors and compensate for bottlenecks. This increased flexibility offers substantial improvement potential. The general model in this paper allows the transfer of the results to estimate real systems or other models.}, language = {en} } @article{AbbasBalcBremenetal.2022, author = {Abbas, Karim and Balc, Nicolae and Bremen, Sebastian and Skupin, Marco}, title = {Crystallization and aging behavior of polyetheretherketone PEEK within rapid tooling and rubber molding}, series = {Journal of Manufacturing and Materials Processing}, volume = {6}, journal = {Journal of Manufacturing and Materials Processing}, number = {5}, publisher = {MDPI}, address = {Basel}, issn = {2504-4494}, doi = {10.3390/jmmp6050093}, pages = {1 -- 12}, year = {2022}, abstract = {In times of short product life cycles, additive manufacturing and rapid tooling are important methods to make tool development and manufacturing more efficient. High-performance polymers are the key to mold production for prototypes and small series. However, the high temperatures during vulcanization injection molding cause thermal aging and can impair service life. The extent to which the thermal stress over the entire process chain stresses the material and whether it leads to irreversible material aging is evaluated. To this end, a mold made of PEEK is fabricated using fused filament fabrication and examined for its potential application. The mold is heated to 200 ◦C, filled with rubber, and cured. A differential scanning calorimetry analysis of each process step illustrates the crystallization behavior and first indicates the material resistance. It shows distinct cold crystallization regions at a build chamber temperature of 90 ◦C. At an ambient temperature above Tg, crystallization of 30\% is achieved, and cold crystallization no longer occurs. Additional tensile tests show a decrease in tensile strength after ten days of thermal aging. The steady decrease in recrystallization temperature indicates degradation of the additives. However, the tensile tests reveal steady embrittlement of the material due to increasing crosslinking.}, language = {en} } @article{SchwarzGebhardtSchleseretal.2019, author = {Schwarz, Alexander and Gebhardt, Andreas and Schleser, Markus and Popoola, Patricia}, title = {New Welding Joint Geometries Manufactured by Powder Bed Fusion from 316L}, series = {Materials Performance and Characterization 8}, journal = {Materials Performance and Characterization 8}, number = {in press}, issn = {2379-1365}, doi = {10.1520/MPC20180096}, year = {2019}, language = {en} }