@article{SedlacekSchaetzkeGessleretal.2004,
  author    = {Sedlacek, G. and Sch{\"a}tzke, C. and Geßler, M. and Schleser, Markus},
  title     = {F{\"u}gen von Bauteilen aus textilbewehrtem Beton},
  series = {Der Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen ; offizielle Zeitschrift der VDI-Gesellschaft Bautechnik. Bd. 79 (2004), H. 12},
  journal   = {Der Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen ; offizielle Zeitschrift der VDI-Gesellschaft Bautechnik. Bd. 79 (2004), H. 12},
  issn      = {0005-6650},
  pages     = {569 -- 575},
  year      = {2004},
  language  = {de}
}
@incollection{LingensVollmann2013,
  author    = {Lingens, Hans and Vollmann, Andreas},
  title     = {F{\"u}getechnik an der FH Aachen - Aus- und Weiterbildung mit Praxisbezug},
  series = {Innovation durch Kooperation : wie der Mittelstand durch Zusammenarbeit mit den Hochschulen seine Wettbewerbsf{\"a}higkeit steigert : Festschrift f{\"u}r Prof. Dr. rer. nat. Johannes Gartzen / Thomas Gartzen, Ute Gartzen (Hrsg.)},
  booktitle = {Innovation durch Kooperation : wie der Mittelstand durch Zusammenarbeit mit den Hochschulen seine Wettbewerbsf{\"a}higkeit steigert : Festschrift f{\"u}r Prof. Dr. rer. nat. Johannes Gartzen / Thomas Gartzen, Ute Gartzen (Hrsg.)},
  publisher = {Apprimus Verlag},
  address   = {Aachen},
  isbn      = {978-3-86359-136-6},
  pages     = {123 -- 127},
  year      = {2013},
  language  = {de}
}
@inproceedings{ReisgenSchoeneSchleseretal.2010,
  author    = {Reisgen, Uwe and Schoene, Jens and Schleser, Markus and Pak, Daniel},
  title     = {F{\"u}getechniken f{\"u}r neuartige Bauweisen auf Basis von d{\"u}nnwandigen Strukturelementen aus textilbewehrtem Beton},
  series = {30. Assistentenseminar F{\"u}ge- und Schweißtechnik : Vortr{\"a}ge der gleichnamigen Veranstaltung auf der Burg Warberg vom 3. bis 5. September 2009. (DVS-Berichte. 268)},
  booktitle = {30. Assistentenseminar F{\"u}ge- und Schweißtechnik : Vortr{\"a}ge der gleichnamigen Veranstaltung auf der Burg Warberg vom 3. bis 5. September 2009. (DVS-Berichte. 268)},
  publisher = {DVS-Media},
  address   = {D{\"u}sseldorf},
  organization    = {Assistentenseminar F{\"u}ge- und Schweißtechnik <30, 2009, Warberg> ; Institut f{\"u}r Schweiß- und F{\"u}getechnik <Aachen>},
  isbn      = {978-3-87155-260-1},
  pages     = {36 -- 43},
  year      = {2010},
  language  = {de}
}
@inproceedings{ReisgenSchoeneSchleseretal.2009,
  author    = {Reisgen, Uwe and Schoene, Jens and Schleser, Markus and Pak, Daniel and Feldmann, Markus},
  title     = {F{\"u}getechniken f{\"u}r neuartige Bauweisen auf Basis von d{\"u}nnwandigen Strukturelementen aus textilbewehrtem Beton},
  series = {Die Verbindungs-Spezialisten 2009 : Große Schweißtechnische Tagung ; Forschungsforum, Industrieforum, Studentenkongress, Handwerkerforum ; Vortr{\"a}ge der Veranstaltung in Essen vom 14. bis 19. September 2009. DVS-Berichte. 258},
  booktitle = {Die Verbindungs-Spezialisten 2009 : Große Schweißtechnische Tagung ; Forschungsforum, Industrieforum, Studentenkongress, Handwerkerforum ; Vortr{\"a}ge der Veranstaltung in Essen vom 14. bis 19. September 2009. DVS-Berichte. 258},
  publisher = {DVS-Media},
  address   = {D{\"u}sseldorf},
  organization    = {DVS - Deutscher Verband f{\"u}r Schweißen und Verwandte Verfahren e.V. ; Große Schweißtechnische Tagung <2009, Essen>},
  isbn      = {978-3-87155-584-8},
  pages     = {312 -- 318},
  year      = {2009},
  language  = {de}
}
@article{Wollert1998,
  author    = {Wollert, J{\"o}rg},
  title     = {F{\"u}r viele, viele bunte Smarties : komplexes qualit{\"a}tsorientiertes Logistikmanagement durch Vollautomatisierung},
  series = {Fracht + Materialfluss : FM ; Technik und Praxis der Logistik},
  volume    = {30},
  journal   = {Fracht + Materialfluss : FM ; Technik und Praxis der Logistik},
  number    = {H. 6},
  issn      = {1430-9807},
  pages     = {30 -- 32},
  year      = {1998},
  language  = {de}
}
@article{UlmerBraunChengetal.2022,
  author    = {Ulmer, Jessica and Braun, Sebastian and Cheng, Chi-Tsun and Dowey, Steve and Wollert, J{\"o}rg},
  title     = {Gamification of virtual reality assembly training: Effects of a combined point and level system on motivation and training results},
  series = {International Journal of Human-Computer Studies},
  volume    = {165},
  journal   = {International Journal of Human-Computer Studies},
  number    = {Art. No. 102854},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1071-5819},
  doi       = {10.1016/j.ijhcs.2022.102854},
  year      = {2022},
  abstract  = {Virtual Reality (VR) offers novel possibilities for remote training regardless of the availability of the actual equipment, the presence of specialists, and the training locations. Research shows that training environments that adapt to users' preferences and performance can promote more effective learning. However, the observed results can hardly be traced back to specific adaptive measures but the whole new training approach. This study analyzes the effects of a combined point and leveling VR-based gamification system on assembly training targeting specific training outcomes and users' motivations. The Gamified-VR-Group with 26 subjects received the gamified training, and the Non-Gamified-VR-Group with 27 subjects received the alternative without gamified elements. Both groups conducted their VR training at least three times before assembling the actual structure. The study found that a level system that gradually increases the difficulty and error probability in VR can significantly lower real-world error rates, self-corrections, and support usages. According to our study, a high error occurrence at the highest training level reduced the Gamified-VR-Group's feeling of competence compared to the Non-Gamified-VR-Group, but at the same time also led to lower error probabilities in real-life. It is concluded that a level system with a variable task difficulty should be combined with carefully balanced positive and negative feedback messages. This way, better learning results, and an improved self-evaluation can be achieved while not causing significant impacts on the participants' feeling of competence.},
  language  = {en}
}
@inproceedings{UlmerBraunChengetal.2020,
  author    = {Ulmer, Jessica and Braun, Sebastian and Cheng, Chi-Tsun and Dowey, Steve and Wollert, J{\"o}rg},
  title     = {Gamified Virtual Reality Training Environment for the Manufacturing Industry},
  series = {Proceedings of the 2020 19th International Conference on Mechatronics - Mechatronika (ME)},
  booktitle = {Proceedings of the 2020 19th International Conference on Mechatronics - Mechatronika (ME)},
  publisher = {IEEE},
  address   = {New York, NY},
  doi       = {10.1109/ME49197.2020.9286661},
  pages     = {1 -- 6},
  year      = {2020},
  abstract  = {Industry 4.0 imposes many challenges for manufacturing companies and their employees. Innovative and effective training strategies are required to cope with fast-changing production environments and new manufacturing technologies. Virtual Reality (VR) offers new ways of on-the-job, on-demand, and off-premise training. A novel concept and evaluation system combining Gamification and VR practice for flexible assembly tasks is proposed in this paper and compared to existing works. It is based on directed acyclic graphs and a leveling system. The concept enables a learning speed which is adjustable to the users' pace and dynamics, while the evaluation system facilitates adaptive work sequences and allows employee-specific task fulfillment. The concept was implemented and analyzed in the Industry 4.0 model factory at FH Aachen for mechanical assembly jobs.},
  language  = {de}
}
@article{DiltheySchleserHanischetal.2006,
  author    = {Dilthey, Ulrich and Schleser, Markus and Hanisch, Vera and Gries, Thomas},
  title     = {Garnzugpr{\"u}fung polymergetr{\"a}nkter Textilien f{\"u}r die Bewehrung von Beton},
  series = {Technische Textilien},
  volume    = {49},
  journal   = {Technische Textilien},
  number    = {1},
  issn      = {0323-3243},
  pages     = {48 -- 50},
  year      = {2006},
  language  = {de}
}
@inproceedings{ChavezBermudezWollert2019,
  author    = {Chavez Bermudez, Victor Francisco and Wollert, J{\"o}rg},
  title     = {Gateway for Automation Controllers and Cloud based Voice Recognition Services},
  series = {KommA, 10. Jahreskolloquium Kommunikation in der Automation},
  booktitle = {KommA, 10. Jahreskolloquium Kommunikation in der Automation},
  publisher = {Institut f{\"u}r Automation und Kommunikation},
  address   = {Magdeburg},
  organization    = {KommA, 2019, Jahreskolloquium Kommunikation in der Automation, 10., Lemgo, DE, 2019-11-20 - 2019-11-21},
  isbn      = {978-3-944722-85-6},
  pages     = {1 -- 8},
  year      = {2019},
  language  = {en}
}
@inproceedings{SchuermannKellerWollert2010,
  author    = {Sch{\"u}rmann, Volker and Keller, A. and Wollert, J{\"o}rg},
  title     = {Geb{\"a}udeautomation mit Webtechnologien : ein Erfahrungsbericht},
  series = {Automation 2010 : der 11. Branchentreff der Mess- und Automatisierungstechnik ; Kongress Baden-Baden, 15. und 16. Juni 2010. (VDI-Berichte ; 2092)},
  booktitle = {Automation 2010 : der 11. Branchentreff der Mess- und Automatisierungstechnik ; Kongress Baden-Baden, 15. und 16. Juni 2010. (VDI-Berichte ; 2092)},
  publisher = {VDI-Verl.},
  address   = {D{\"u}sseldorf},
  organization    = {VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik},
  isbn      = {978-3-18-092092-4},
  pages     = {321 -- 324},
  year      = {2010},
  language  = {de}
}
@book{Pfeiffer2000,
  author    = {Pfeiffer, Johann},
  title     = {Genauigkeit und Qualit{\"a}t von Freiformfl{\"a}chen},
  publisher = {Fachhochsch.},
  address   = {Aachen},
  year      = {2000},
  language  = {de}
}
@article{Pfeiffer2004,
  author    = {Pfeiffer, Johann},
  title     = {Genauigkeit und Qualit{\"a}t von Freiformfl{\"a}chen / Projektleiter: Joachim Gauchel},
  series = {Forschungsbericht 2004 / Hrsg.: Der Rektor der Fachhochschule Aachen},
  journal   = {Forschungsbericht 2004 / Hrsg.: Der Rektor der Fachhochschule Aachen},
  publisher = {Fachhochsch.},
  address   = {Aachen},
  pages     = {180},
  year      = {2004},
  language  = {de}
}
@article{PfeifferGauchelLuecke1999,
  author    = {Pfeiffer, Johann and Gauchel, Joachim and L{\"u}cke, Mathias},
  title     = {Genauigkeitsbetrachtungen in der CIM-Prozesskette},
  series = {4th International Scientific Colloquium CAx Techniques : proceedings of the 4th international scientific colloquium, Fachhochschule Bielefeld, Germany, September 13 - 15, 1999 / [organized in co-operation between Fachhochschule Bielefeld and Rzesz{\´o}w University of Technology ]. Ed. by Heinrich Ostholt},
  journal   = {4th International Scientific Colloquium CAx Techniques : proceedings of the 4th international scientific colloquium, Fachhochschule Bielefeld, Germany, September 13 - 15, 1999 / [organized in co-operation between Fachhochschule Bielefeld and Rzesz{\´o}w University of Technology ]. Ed. by Heinrich Ostholt},
  publisher = {[Fachhochsch.]},
  address   = {[Bielefeld]},
  isbn      = {3-00-004379-9},
  pages     = {323 -- 332},
  year      = {1999},
  language  = {de}
}
@article{Thomas2014,
  author    = {Thomas, Axel},
  title     = {Generation Y},
  series = {P.T. : Magazin f{\"u}r Wirtschaft und Gesellschaft},
  volume    = {10},
  journal   = {P.T. : Magazin f{\"u}r Wirtschaft und Gesellschaft},
  number    = {3},
  publisher = {OPS Netzwerk},
  address   = {Leipzig},
  issn      = {1860-501X},
  pages     = {6 -- 9},
  year      = {2014},
  language  = {de}
}
@book{Gebhardt2007,
  author    = {Gebhardt, Andreas},
  title     = {Generative Fertigungsverfahren - Rapid Prototyping - Rapid Tooling - Rapid Manufacturing, 3. Aufl.},
  edition   = {3},
  publisher = {Hanser},
  address   = {M{\"u}nchen},
  isbn      = {978-3-446-22666-1},
  pages     = {XVI, 499 S. : Ill., graph. Darst.},
  year      = {2007},
  language  = {de}
}
@book{Gebhardt2013,
  author    = {Gebhardt, Andreas},
  title     = {Generative Fertigungsverfahren : Additive Manufacturing und 3D Drucken f{\"u}r Prototyping - Tooling - Produktion},
  edition   = {4., neu bearbeitete und erweiterte Auflage},
  publisher = {Hanser},
  address   = {M{\"u}nchen},
  isbn      = {978-3-446-43651-0 ; 978-3-446-43652-7},
  doi       = {10.3139/9783446436527},
  pages     = {XXIV, 637 S. : zahlr. Ill. u. graph. Darst.},
  year      = {2013},
  language  = {de}
}
@inproceedings{Gebhardt2015,
  author    = {Gebhardt, Andreas},
  title     = {Generative Fertigungsverfahren in der Produktentwicklung},
  series = {Spritzgießen 2015},
  booktitle = {Spritzgießen 2015},
  publisher = {VDI-Verlag},
  address   = {D{\"u}sseldorf},
  organization    = {VDI-Gesellschaft Kunststofftechnik (VDI-K), Baden-Baden, DE, 10.-11.Feb, 2015},
  isbn      = {978-3-18-234336-3},
  pages     = {1 -- 19},
  year      = {2015},
  language  = {de}
}
@inproceedings{UlmerBraunLaietal.2019,
  author    = {Ulmer, Jessica and Braun, Sebastian and Lai, Chow Yin and Cheng, Chi-Tsun and Wollert, J{\"o}rg},
  title     = {Generic integration of VR and AR in product lifecycles based on CAD models},
  series = {Proceedings of The 23rd World Multi-Conference on Systemics, Cybernetics and Informatics: WMSCI 2019},
  booktitle = {Proceedings of The 23rd World Multi-Conference on Systemics, Cybernetics and Informatics: WMSCI 2019},
  year      = {2019},
  language  = {en}
}
@inproceedings{UlmerBraunWollert2018,
  author    = {Ulmer, Jessica and Braun, Sebastian and Wollert, J{\"o}rg},
  title     = {Generische IoT Adapter f{\"u}r semantische Maschinenschnittstellen},
  series = {Internet of Things - vom Sensor bis zur Cloud},
  booktitle = {Internet of Things - vom Sensor bis zur Cloud},
  pages     = {1 -- 5},
  year      = {2018},
  language  = {de}
}
@article{Thomas2016,
  author    = {Thomas, Axel},
  title     = {Genussrechte als Instrument der Unternehmensfinanzierung von kommunalen Wohnungs- baugesellschaften},
  series = {VM Verwaltung und Management},
  volume    = {22},
  journal   = {VM Verwaltung und Management},
  number    = {6},
  publisher = {Nomos},
  address   = {Baden-Baden},
  issn      = {0947-9856},
  doi       = {10.5771/0947-9856-2016-6-322},
  pages     = {322 -- 327},
  year      = {2016},
  abstract  = {Die kommunalen Wohnungsbaugesellschaften und ihr Gesch{\"a}ftszweck bzw. Versorgungsauftrag erfahren aus gesamtgesellschaftlichen Gr{\"u}nden aktuell einen erheblichen Bedeutungszuwachs. Der kommunale Wohnungsbau soll und muss intensiviert werden, da z.B. zunehmend Wohnungsbindungen auslaufen. Bezahlbare Neubauten fehlen speziell Familien, Senioren, Studenten und Fl{\"u}chtlingen. Um das Investitionsvolumen zu bew{\"a}ltigen, bedarf es nicht nur der F{\"o}rderkredite, sondern auch der Zuf{\"u}hrung „frischen Kapitals". Der Beitrag stellt dar, dass Genussrechte ein interessantes und oft unbekanntes Finanzierungsinstrument f{\"u}r kommunale Wohnungsbaugesellschaften mit passgenauen Ausgestaltungsm{\"o}glichkeiten sind. Mit Hilfe von Genussrechten k{\"o}nnen die notwendigen Neubau-Investitionen solide mit Quasi-Eigenkapital unterlegt werden und den sozialen Wohnungsbau wiederbeleben. Genussrechte als Hybridkapital lassen sich mangels gesetzlicher Eingrenzung exakt und individuell ebenso an die Bed{\"u}rfnisse der kommunalen Wohnungsbaugesellschaft anpassen wie an die der Gesellschafter und des jeweiligen Neubauvorhabens.},
  language  = {de}
}
@article{KaemperThuerigenEhrfeldetal.1996,
  author    = {K{\"a}mper, Klaus-Peter and Th{\"u}rigen, C. and Ehrfeld, W. and Hagemann, B.},
  title     = {Gesichtspunkte beim Miniaturisieren von Umlaufr{\"a}dergetrieben. Th{\"u}rigen, C.; Ehrfeld, W. ; Hagemann, B.; K{\"a}mper, K.-P.; Lehr, H.; Michel, F.},
  series = {Innovative Kleinantriebe : Tagung Mainz, 9. und 10. Mai 1996 / VDE-VDI-Gesellschaft Mikroelektronik, Mikro- und Feinwerktechnik, GMM},
  journal   = {Innovative Kleinantriebe : Tagung Mainz, 9. und 10. Mai 1996 / VDE-VDI-Gesellschaft Mikroelektronik, Mikro- und Feinwerktechnik, GMM},
  publisher = {VDI-Verl.},
  address   = {D{\"u}sseldorf},
  isbn      = {3-18-091269-3},
  pages     = {235},
  year      = {1996},
  language  = {de}
}
@article{Anik1978,
  author    = {Anik, Sabri},
  title     = {Gespritzte Metallbeschichtungen : Eigenschaften lichtbogengespritzter Stahlschichten in Abh{\"a}ngigkeit von einigen Spritzparametern},
  series = {Technische Rundschau : TR ; das Schweizer Industrie-Magazin},
  volume    = {70},
  journal   = {Technische Rundschau : TR ; das Schweizer Industrie-Magazin},
  number    = {26},
  publisher = {Medtrix Group},
  address   = {Basel},
  issn      = {0040-148X},
  pages     = {9 -- 13},
  year      = {1978},
  language  = {de}
}
@article{Anik1978,
  author    = {Anik, Sabri},
  title     = {Gespritzte Metallschichten : Eigenschaften lichtbogengespritzter Stahlschichten in Abh{\"a}ngigkeit von einigen Spritzparametern},
  series = {Technische Rundschau : TR ; das Schweizer Industrie-Magazin},
  volume    = {70},
  journal   = {Technische Rundschau : TR ; das Schweizer Industrie-Magazin},
  number    = {39},
  publisher = {Medtrix Group},
  address   = {Basel},
  issn      = {0040-148X},
  pages     = {37 -- 41},
  year      = {1978},
  language  = {de}
}
@article{HeinrichsHaub1991,
  author    = {Heinrichs, Horst and Haub, A.},
  title     = {Grafische Oberfl{\"a}chen vereinfachen den FEM-Einsatz},
  series = {CAD-CAM Report. 10 (1991), H. 3},
  journal   = {CAD-CAM Report. 10 (1991), H. 3},
  pages     = {79 -- 85},
  year      = {1991},
  language  = {de}
}
@article{Heinrichs1983,
  author    = {Heinrichs, Horst},
  title     = {Graphisch interaktive FE-Netzwerksgenerierung mit dem Programm FEDIG auf Rechnern ab 64 KB-Memory mit Digitizer},
  series = {IKO Software Service. 12 (1983)},
  journal   = {IKO Software Service. 12 (1983)},
  pages     = {191 -- 215},
  year      = {1983},
  language  = {de}
}
@article{Heinrichs1984,
  author    = {Heinrichs, Horst},
  title     = {Graphisch interaktiver FEM-Berechnungsarbeitsplatz},
  series = {Konstruktion, Elemente, Methoden. 21 (1984), H. 2},
  journal   = {Konstruktion, Elemente, Methoden. 21 (1984), H. 2},
  pages     = {82 -- 85},
  year      = {1984},
  language  = {de}
}
@article{Heinrichs1981,
  author    = {Heinrichs, Horst},
  title     = {Graphische Datenverarbeitung bei FEM-Berechnungen von Maschinen : interaktive Geometrieerfassung u. Netzwerkerstellung},
  pages     = {III, 123 S. : graph. Darst.},
  year      = {1981},
  language  = {de}
}
@article{HanrathPlesken1985,
  author    = {Hanrath, Wilhelm and Plesken, Wilhelm},
  title     = {Group rings and irreducible representations of space groups / by W. Hanrath and W. Plesken},
  series = {Journal f{\"u}r die reine und angewandte Mathematik. 362 (1985)},
  journal   = {Journal f{\"u}r die reine und angewandte Mathematik. 362 (1985)},
  isbn      = {0075-4102},
  pages     = {130 -- 140},
  year      = {1985},
  language  = {en}
}
@book{Schmidt2016,
  author    = {Schmidt, Bernd},
  title     = {Grundlagen der Elektrotechnik und Elektronik f{\"u}r Ingenieure der Schienenfahrzeugtechnik und anderer Fachrichtungen},
  edition   = {1. Aufl.},
  publisher = {B. Schmidt, Fachverlag f{\"u}r Elektro- und Informationstechnik},
  address   = {Bielefeld},
  isbn      = {978-3-944131-02-3},
  pages     = {XXIII, 255 Seiten : Illustrationen},
  year      = {2016},
  language  = {de}
}
@book{Schmidt2017,
  author    = {Schmidt, Bernd},
  title     = {Grundlagen der Elektrotechnik und Elektronik f{\"u}r Ingenieure der Schienenfahrzeugtechnik und anderer Fachrichtungen : mit 12 Tabellen und 221 Abbildungen ; NEU mit Verst{\"a}ndnisaufgaben und L{\"o}sungsbeispielen},
  edition   = {2. vollst{\"a}ndig {\"u}berarbeitete Auflage},
  publisher = {B. Schmidt, Fachverlag f{\"u}r Elektro- und Informationstechnik},
  address   = {Bielefeld},
  isbn      = {978-3-944131-03-0},
  pages     = {XXV, 307 Seiten : Illustrationen, Diagramme},
  year      = {2017},
  language  = {de}
}
@book{Schmidt2019,
  author    = {Schmidt, Bernd},
  title     = {Grundlagen der Elektrotechnik und Elektronik f{\"u}r Ingenieure der Schienenfahrzeugtechnik und anderer Fachrichtungen : neu mit neuem SI-System und weiteren Inhalten f{\"u}r Mechantroniker},
  edition   = {3. vollst{\"a}ndig {\"u}berarbeitete Auflage},
  publisher = {B. Schmidt, Fachverlag f{\"u}r Elektro- und Informationstechnik},
  address   = {Bielefeld},
  isbn      = {978-3-944131-04-7},
  pages     = {XXVI, 270 Seiten : Illustrationen, Diagramme},
  year      = {2019},
  language  = {de}
}
@inproceedings{Wollert2006,
  author    = {Wollert, J{\"o}rg},
  title     = {Grundlagen Wireless - Was kann von Funktechnik erwartet werden?},
  series = {Wireless technologies : von der Technologie zur Anwendung : 8. Kongress, 27. - 28. September 2006, Dortmund / J{\"o}rg Wollert (Hrsg.) (Fortschritt-Berichte VDI : Reihe 10, Informatik, Kommunikation ; Nr. 772)},
  booktitle = {Wireless technologies : von der Technologie zur Anwendung : 8. Kongress, 27. - 28. September 2006, Dortmund / J{\"o}rg Wollert (Hrsg.) (Fortschritt-Berichte VDI : Reihe 10, Informatik, Kommunikation ; Nr. 772)},
  publisher = {VDI-Verl.},
  address   = {D{\"u}sseldorf},
  isbn      = {3-18-377210-8},
  pages     = {314 -- 323},
  year      = {2006},
  language  = {de}
}
@inproceedings{Wollert2010,
  author    = {Wollert, J{\"o}rg},
  title     = {Grundlagen Wireless Technologie},
  series = {Wireless Technologies : 12. Kongress, 22. - 23. September 2010, Bochum ; von der Technologie zur Anwendung / J{\"o}rg F. Wollert (Hrsg.) (Fortschritt-Berichte VDI : Reihe 10, Informatik, Kommunikation ; 810)},
  booktitle = {Wireless Technologies : 12. Kongress, 22. - 23. September 2010, Bochum ; von der Technologie zur Anwendung / J{\"o}rg F. Wollert (Hrsg.) (Fortschritt-Berichte VDI : Reihe 10, Informatik, Kommunikation ; 810)},
  publisher = {VDI-Verl.},
  address   = {D{\"u}sseldorf},
  pages     = {322 -- 330},
  year      = {2010},
  language  = {de}
}
@article{Enning1992,
  author    = {Enning, Manfred},
  title     = {Grunds{\"a}tzliche Konzepte bei Lageregelungen f{\"u}r Industrieroboter},
  series = {Maschinenmarkt. 98 (1992), H. 37},
  journal   = {Maschinenmarkt. 98 (1992), H. 37},
  isbn      = {0341-5775},
  year      = {1992},
  language  = {de}
}
@article{ChengWollertChenetal.2023,
  author    = {Cheng, Chi-Tsun and Wollert, J{\"o}rg and Chen, Xi and Fapojuwo, Abraham O.},
  title     = {Guest Editorial : Circuits and Systems for Industry X.0 Applications},
  series = {IEEE Journal on Emerging and Selected Topics in Circuits and Systems},
  volume    = {13},
  journal   = {IEEE Journal on Emerging and Selected Topics in Circuits and Systems},
  edition   = {2},
  publisher = {IEEE},
  address   = {New York},
  issn      = {2156-3357 (Print)},
  doi       = {10.1109/JETCAS.2023.3278843},
  pages     = {457 -- 460},
  year      = {2023},
  language  = {en}
}
@book{Gauchel2002,
  author    = {Gauchel, Joachim},
  title     = {Gutachten 4-Stationen-Rundschalttisch-Pr{\"u}fautomat},
  address   = {Landgericht Hagen},
  year      = {2002},
  language  = {de}
}
@article{Pfeiffer2002,
  author    = {Pfeiffer, Johann},
  title     = {Gute Chancen im Maschinenbau},
  series = {Aachener Nachrichten / Aachener Zeitung : Sonderbeil. (2002)},
  journal   = {Aachener Nachrichten / Aachener Zeitung : Sonderbeil. (2002)},
  publisher = {-},
  year      = {2002},
  language  = {de}
}
@article{Pfeiffer2002,
  author    = {Pfeiffer, Johann},
  title     = {Gute Chancen im Maschinenbau},
  series = {Rheinische Post : Sonderbeil. (2002)},
  journal   = {Rheinische Post : Sonderbeil. (2002)},
  year      = {2002},
  language  = {de}
}
@article{EnningPfaff2017,
  author    = {Enning, Manfred and Pfaff, Raphael},
  title     = {G{\"u}terwagen 4.0 - Der G{\"u}terwagen f{\"u}r das Internet der Dinge. Teil 1: Gesamtsystembetrachtung und grundlegendes Konzept},
  series = {ETR - Eisenbahntechnische Rundschau},
  volume    = {66},
  journal   = {ETR - Eisenbahntechnische Rundschau},
  number    = {1/2},
  publisher = {DVV Media Group},
  address   = {Hamburg},
  issn      = {0013-2845},
  pages     = {12 -- 16},
  year      = {2017},
  language  = {de}
}
@article{PfaffEnning2017,
  author    = {Pfaff, Raphael and Enning, Manfred},
  title     = {G{\"u}terwagen 4.0 - Der G{\"u}terwagen f{\"u}r das Internet der Dinge. Teil 2: Ausgew{\"a}hlte technische Aspekte und Prozesse},
  series = {ETR - Eisenbahntechnische Rundschau},
  volume    = {66},
  journal   = {ETR - Eisenbahntechnische Rundschau},
  number    = {5},
  publisher = {DVV Media Group},
  address   = {Hamburg},
  issn      = {0013-2845},
  pages     = {74 -- 77},
  year      = {2017},
  language  = {de}
}
@article{SchmidtEnningPfaff2018,
  author    = {Schmidt, Bernd and Enning, Manfred and Pfaff, Raphael},
  title     = {G{\"u}terwagen 4.0 - Der G{\"u}terwagen f{\"u}r das Internet der Dinge Teil 3: Einf{\"u}hrungsszenarien f{\"u}r aktive, kommunikative G{\"u}terwagen},
  series = {ETR - Eisenbahntechnische Rundschau},
  volume    = {67},
  journal   = {ETR - Eisenbahntechnische Rundschau},
  number    = {5},
  publisher = {DVV Media Group},
  address   = {Hamburg},
  issn      = {0013-2845},
  pages     = {60 -- 64},
  year      = {2018},
  abstract  = {Wenn durch innovative, automatisierte G{\"u}terwagen betriebswirtschaftliche Vorteile nutzbar gemacht werden sollen, muss die Migration auf das neue System in sinnvollen Teilschritten unter Ber{\"u}cksichtigung der organisationellen und betrieblichen Vereinbarkeit vorgenommen werden. Eine stufenweise Migration mit Nachr{\"u}stbarkeit und Kompatibilit{\"a}t kann die optimale Ausstattungsvariante f{\"u}r die unterschiedlichen Betriebsszenarien sowie eine Steigerung der Wirtschaftlichkeit des Gesamtsystems bieten.},
  language  = {de}
}
@article{GrundmannGerhardt1996,
  author    = {Grundmann, Reinhard and Gerhardt, Hans Joachim},
  title     = {Hart im Wind - Windger{\"a}usche an Fassadenelementen},
  series = {db deutsche bauzeitung. 130 (1996), H. 8},
  journal   = {db deutsche bauzeitung. 130 (1996), H. 8},
  pages     = {96 -- 98},
  year      = {1996},
  language  = {de}
}
@inproceedings{Wollert1999,
  author    = {Wollert, J{\"o}rg},
  title     = {Harte Echtzeit f{\"u}r Windows},
  series = {Tagungsband : SPS/IPC/Drives '99 : 10. Fachmesse und Kongress, 23. - 25. November 1999 N{\"u}rnberg},
  booktitle = {Tagungsband : SPS/IPC/Drives '99 : 10. Fachmesse und Kongress, 23. - 25. November 1999 N{\"u}rnberg},
  publisher = {H{\"u}thig},
  address   = {Heidelberg},
  organization    = {SPS IPC Drives <10, 1999, N{\"u}rnberg>},
  isbn      = {3-7785-2788-6},
  pages     = {172 -- 182},
  year      = {1999},
  language  = {de}
}
@article{HarmsReisgenSchleseretal.2010,
  author    = {Harms, Alexander and Reisgen, Uwe and Schleser, Markus and Schiebahn, Alexander and Thiele, Regina},
  title     = {Herausforderungen an die F{\"u}getechnik: Leichtbau und Kosteneffizienz beim Elektrofahrzeug},
  series = {Elektromobilit{\"a}t made in Aachen. (RWTH-Themen : Berichte aus der Rheinisch-Westf{\"a}lischen Technischen Hochschule Aachen ; Ausg. 2010, 2)},
  journal   = {Elektromobilit{\"a}t made in Aachen. (RWTH-Themen : Berichte aus der Rheinisch-Westf{\"a}lischen Technischen Hochschule Aachen ; Ausg. 2010, 2)},
  issn      = {0179-079X},
  pages     = {58 -- 60},
  year      = {2010},
  language  = {de}
}
@incollection{KlockeKatz2017,
  author    = {Klocke, Martina and Katz, Christiane},
  title     = {Heterogenit{\"a}t von MINT-Studierenden als Herausforderung},
  series = {Tagungsband zum 3. Symposium zur Hochschullehre in den MINT-F{\"a}chern},
  booktitle = {Tagungsband zum 3. Symposium zur Hochschullehre in den MINT-F{\"a}chern},
  publisher = {Technische Hochschule N{\"u}rnberg Georg Simon Ohm},
  address   = {N{\"u}rnberg},
  pages     = {31 -- 36},
  year      = {2017},
  language  = {de}
}
@article{KallweitKaminskyCanneytetal.2007,
  author    = {Kallweit, Stephan and Kaminsky, R. and Canneyt, C. van and Eloot, S.},
  title     = {High-Speed und Stereo-PIV in einem k{\"u}nstlichen Blutgef{\"a}ß / Kallweit, S. ; Kaminsky, R. ; Canneyt, C. van ; Eloot, S.},
  series = {Lasermethoden in der Str{\"o}mungsmesstechnik: 15. Fachtagung 2007 Rostock / Hrsg.: Alfred Leder ....},
  journal   = {Lasermethoden in der Str{\"o}mungsmesstechnik: 15. Fachtagung 2007 Rostock / Hrsg.: Alfred Leder ....},
  isbn      = {978-3-86009-007-7},
  pages     = {48},
  year      = {2007},
  language  = {de}
}
@article{KlockeLenk1993,
  author    = {Klocke, Martina and Lenk, A.},
  title     = {Hilfe zur Selbsthilfe},
  series = {Lernfeld Betrieb (1993)},
  journal   = {Lernfeld Betrieb (1993)},
  isbn      = {0930-4460},
  pages     = {26 -- 27},
  year      = {1993},
  language  = {de}
}
@article{KallweitKisifeUtzenradetal.2008,
  author    = {Kallweit, Stephan and Kisife, F. and Utzenrad, M. and Weber, J.},
  title     = {Hispeed Scanning Stereo PIV hinter einer k{\"u}nstlichen Herzklappe / Kallweit, S. ; Kisife, F. ; Utzenrad, M. ; Weber, J.},
  series = {Lasermethoden in der Str{\"o}mungsmesstechnik : 16. Fachtagung, 9. - 11. September 2008, Karlsruhe / veranst. von der Deutschen Gesellschaft f{\"u}r Laser-Anemometrie GALA e.V. Hrsg.: B. Ruck},
  journal   = {Lasermethoden in der Str{\"o}mungsmesstechnik : 16. Fachtagung, 9. - 11. September 2008, Karlsruhe / veranst. von der Deutschen Gesellschaft f{\"u}r Laser-Anemometrie GALA e.V. Hrsg.: B. Ruck},
  publisher = {GALA e.V.},
  address   = {Karlsruhe},
  isbn      = {978-3-9805613-4-1},
  pages     = {29},
  year      = {2008},
  language  = {de}
}
@article{Knepper1985,
  author    = {Knepper, Ludger},
  title     = {Hochregallager fuer Luftfracht - 365 Tage pro Jahr in Betrieb},
  series = {Foerdern und Heben. 35 (1985), H. 5},
  journal   = {Foerdern und Heben. 35 (1985), H. 5},
  isbn      = {0341-2636},
  pages     = {363 -- 366},
  year      = {1985},
  language  = {de}
}
@book{Pfeiffer1997,
  author    = {Pfeiffer, Johann},
  title     = {HSP III Koordinatenmessger{\"a}t},
  publisher = {Fachhochsch.},
  address   = {Aachen},
  year      = {1997},
  language  = {de}
}
@article{UlmerBraunChengetal.2020,
  author    = {Ulmer, Jessica and Braun, Sebastian and Cheng, Chi-Tsun and Dowey, Steve and Wollert, J{\"o}rg},
  title     = {Human-Centered Gamification Framework for Manufacturing Systems},
  series = {Procedia CIRP},
  volume    = {93},
  journal   = {Procedia CIRP},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {2212-8271},
  doi       = {10.1016/j.procir.2020.04.076},
  pages     = {670 -- 675},
  year      = {2020},
  abstract  = {While bringing new opportunities, the Industry 4.0 movement also imposes new challenges to the manufacturing industry and all its stakeholders. In this competitive environment, a skilled and engaged workforce is a key to success. Gamification can generate valuable feedbacks for improving employees' engagement and performance. Currently, Gamification in workspaces focuses on computer-based assignments and training, while tasks that require manual labor are rarely considered. This research provides an overview of Enterprise Gamification approaches and evaluates the challenges. Based on that, a skill-based Gamification framework for manual tasks is proposed, and a case study in the Industry 4.0 model factory is shown.},
  language  = {en}
}
@inproceedings{PakPiegelerFeldmannetal.2006,
  author    = {Pak, Daniel and Piegeler, D. and Feldmann, Markus and Schleser, Markus and Dilthey, Ulrich},
  title     = {Hybrid joints of textile reinforced concrete parts - designed for assembly},
  series = {Textile reinforced concrete : proceedings of the 1. International RILEM Conference, held at the RWTH Aachen, September 6/7, 2006. (RILEM proceedings ; 50)},
  booktitle = {Textile reinforced concrete : proceedings of the 1. International RILEM Conference, held at the RWTH Aachen, September 6/7, 2006. (RILEM proceedings ; 50)},
  editor    = {Hegger, Josef},
  publisher = {RILEM Publ.},
  address   = {Bagneux},
  organization    = {International Conference on Textile Reinforced Concrete <1, 2006, Aachen>},
  isbn      = {2-912143-97-7},
  pages     = {181 -- 190},
  year      = {2006},
  language  = {en}
}
@inproceedings{Wollert1994,
  author    = {Wollert, J{\"o}rg},
  title     = {Hybride arbeitspunktabh{\"a}ngige Beobachter zur intelligenten Modellierung und Regelung nichtlinearer Strecken},
  series = {Fuzzy control : GMA-Aussprachetag ; Tagung Langen, 22. und 23. M{\"a}rz 1994. (VDI-Berichte ; 1113)},
  booktitle = {Fuzzy control : GMA-Aussprachetag ; Tagung Langen, 22. und 23. M{\"a}rz 1994. (VDI-Berichte ; 1113)},
  publisher = {VDI-Verl.},
  address   = {D{\"u}sseldorf},
  organization    = {VDI/VDE-Gesellschaft Meß- und Automatisierungstechnik},
  isbn      = {3-18-091113-1},
  pages     = {497 -- 506},
  year      = {1994},
  language  = {de}
}
@inproceedings{PlessmannWollert1993,
  author    = {Pleßmann, K. W. and Wollert, J{\"o}rg},
  title     = {Hybride Beobachter zur Regelung arbeitspunktabh{\"a}ngiger Regelstrecken},
  series = {Berichtsband / 3. Workshop "Fuzzy Control" des GMA-UA 1.4.2 am 11./12.11.1993 in Dortmund. (Forschungsberichte / Universit{\"a}t Dortmund, Fakult{\"a}t f{\"u}r Elektrotechnik ; 2/93)},
  booktitle = {Berichtsband / 3. Workshop "Fuzzy Control" des GMA-UA 1.4.2 am 11./12.11.1993 in Dortmund. (Forschungsberichte / Universit{\"a}t Dortmund, Fakult{\"a}t f{\"u}r Elektrotechnik ; 2/93)},
  publisher = {Univ., Fak. Elektrotechnik},
  address   = {Dortmund},
  pages     = {122 -- 126},
  year      = {1993},
  language  = {de}
}
@incollection{HirtBleckBobzinetal.2011,
  author    = {Hirt, Gerhard and Bleck, Wolfgang and Bobzin, Kirsten and Schleser, Markus and [u.a.],},
  title     = {Hybride Produktionssysteme},
  series = {Integrative Produktionstechnik f{\"u}r Hochlohnl{\"a}nder / hrsg. von Christian Brecher},
  booktitle = {Integrative Produktionstechnik f{\"u}r Hochlohnl{\"a}nder / hrsg. von Christian Brecher},
  publisher = {Springer},
  address   = {Berlin [u.a.]},
  isbn      = {978-3-642-20692-4 (Print) ; 978-3-642-20693-1 (E-Book)},
  doi       = {10.1007/978-3-642-20693-1_5},
  pages     = {465 -- 745},
  year      = {2011},
  abstract  = {W{\"a}hrend die virtuelle Produktentstehungskette große Gestaltungsfreir{\"a}ume bietet, ist die reale Produktentstehungskette durch wesentlich mehr Randbedingungen gekennzeichnet, die nicht oder nur ansatzweise beeinflussbar sind. Die Realisierung des aus logistischer Sicht optimalen One-Piece-Flow bei gleichzeitiger Steigerung von Flexibilit{\"a}t und Produktivit{\"a}t sowie des Verschiebens der Grenze des technologisch Machbaren m{\"u}ssen in zuk{\"u}nftigen Forschungsans{\"a}tzen gleichermaßen betrachtet werden. Die Grenzverschiebung auf Basis der Integration von Technologien ist dabei ein viel versprechender Ansatz, der es in vielen F{\"a}llen erm{\"o}glicht, in allen genannten Zielrichtungen gleichermaßen Potentiale zu erschließen.},
  language  = {de}
}
@article{Gebhardt2008,
  author    = {Gebhardt, Andreas},
  title     = {Hype um Generative Verfahren. Generative Verfahren zur Herstellung von Kleinserien durchlaufen die Phase eines Booms},
  series = {Economic Engineering (2008)},
  journal   = {Economic Engineering (2008)},
  isbn      = {1436-3348},
  pages     = {76 -- 79},
  year      = {2008},
  language  = {de}
}
@article{Gebhardt1989,
  author    = {Gebhardt, Andreas},
  title     = {H{\"a}rten von Kurbelwellen},
  pages     = {1 -- 14},
  year      = {1989},
  language  = {de}
}
@article{Knepper1981,
  author    = {Knepper, Ludger},
  title     = {Im neuen Lufthansa-Frachtterminal: vom Hochregallager direkt ins Flugzeug},
  series = {Foerdermittel Journal. Kennzifferzeitschrift fuer Materialfluss, Lager und Transport. 13 (1981), H. 7/8},
  journal   = {Foerdermittel Journal. Kennzifferzeitschrift fuer Materialfluss, Lager und Transport. 13 (1981), H. 7/8},
  isbn      = {0013-5674},
  pages     = {22 -- 24},
  year      = {1981},
  language  = {de}
}
@article{Wollert1998,
  author    = {Wollert, J{\"o}rg},
  title     = {Im Sog des Standards : Windows CE als Betriebssystem f{\"u}r Embedded Controller},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  volume    = {Bd. 47},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {H. 9},
  issn      = {0013-5658},
  pages     = {40 -- 51},
  year      = {1998},
  language  = {de}
}
@article{KallweitHelbingOrglmeisteretal.1994,
  author    = {Kallweit, Stephan and Helbing, M. and Orglmeister, R. and Siekmann, H. E.},
  title     = {Image Processing Techniques with Neural Networks for Flow Visualization in Rotating Machinery / Helbing, M. ; Orgimeiste, R. [Orglmeister, R.] ; Kallweit, S. ; Siekmann, H. E. ; Dues, M. ; Cronemeyer, J.},
  series = {FLUCOME '94 : the 4th Triennial International Symposium on Fluid Control, Measurement and Visualization; August 29 - September 1, 1994, Toulouse, France, International Congress Centre, DIGORA-Lab{\`e}ge / CERT/ONERA. General chairman Patrick Hebrard},
  journal   = {FLUCOME '94 : the 4th Triennial International Symposium on Fluid Control, Measurement and Visualization; August 29 - September 1, 1994, Toulouse, France, International Congress Centre, DIGORA-Lab{\`e}ge / CERT/ONERA. General chairman Patrick Hebrard},
  address   = {Toulouse},
  pages     = {87 -- 94},
  year      = {1994},
  language  = {en}
}
@article{GebhardtHoetterZiebura2014,
  author    = {Gebhardt, Andreas and H{\"o}tter, Jan-Steffen and Ziebura, Dawid},
  title     = {Impact of SLM build parameters on the surface quality},
  series = {RTejournal - Forum f{\"u}r Rapid Technologien},
  volume    = {11 (2014)},
  journal   = {RTejournal - Forum f{\"u}r Rapid Technologien},
  number    = {1},
  issn      = {1614-0923},
  pages     = {1 -- 14},
  year      = {2014},
  language  = {de}
}
@inproceedings{EngemannBadriWenningetal.2019,
  author    = {Engemann, Heiko and Badri, Sriram and Wenning, Marius and Kallweit, Stephan},
  title     = {Implementation of an Autonomous Tool Trolley in a Production Line},
  series = {Advances in Service and Industrial Robotics. RAAD 2019. Advances in Intelligent Systems and Computing, vol 980},
  booktitle = {Advances in Service and Industrial Robotics. RAAD 2019. Advances in Intelligent Systems and Computing, vol 980},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-19648-6},
  doi       = {10.1007/978-3-030-19648-6_14},
  pages     = {117 -- 125},
  year      = {2019},
  language  = {en}
}
@inproceedings{SeilerPichlerPfaffetal.2008,
  author    = {Seiler, Friedrich and Pichler, Alexander and Pfaff, Raphael and George, Alfred and Srulijes, Julio},
  title     = {Improved Doppler picture velocimetry and new automated processing},
  series = {14th International Symposium on Applications of Laser Techniques to Fluid Mechanics : Lisbon, Portugal, 7 - 10 July 2008},
  booktitle = {14th International Symposium on Applications of Laser Techniques to Fluid Mechanics : Lisbon, Portugal, 7 - 10 July 2008},
  organization    = {International Symposium on Applications of Laser Techniques to Fluid Mechanics <14, 2008, Lisboa>},
  pages     = {1 -- 12},
  year      = {2008},
  language  = {en}
}
@inproceedings{DiltheyMundRaupachetal.2004,
  author    = {Dilthey, Ulrich and Mund, F. and Raupach, Michael and Schleser, Markus and Walk-Lauffer, Bernd},
  title     = {Improvement of textile reinforced concrete by polymer additives},
  series = {ICPIC '04 : 11th International Congress on Polymers in Concrete : 2nd-4th June, 2004 at BAM, Berlin, Germany : proceedings / ed. by M. Maultzsch},
  booktitle = {ICPIC '04 : 11th International Congress on Polymers in Concrete : 2nd-4th June, 2004 at BAM, Berlin, Germany : proceedings / ed. by M. Maultzsch},
  publisher = {BAM},
  address   = {Berlin},
  isbn      = {3-00-013706-8},
  pages     = {469 -- 476},
  year      = {2004},
  language  = {en}
}
@inproceedings{AlhwarinFerreinGebhardtetal.2015,
  author    = {Alhwarin, Faraj and Ferrein, Alexander and Gebhardt, Andreas and Kallweit, Stephan and Scholl, Ingrid and Tedjasukmana, Osmond Sanjaya},
  title     = {Improving additive manufacturing by image processing and robotic milling},
  series = {2015 IEEE International Conference on Automation Science and Engineering (CASE), Aug 24-28, 2015 Gothenburg, Sweden},
  booktitle = {2015 IEEE International Conference on Automation Science and Engineering (CASE), Aug 24-28, 2015 Gothenburg, Sweden},
  doi       = {10.1109/CoASE.2015.7294217},
  pages     = {924 -- 929},
  year      = {2015},
  language  = {en}
}
@article{CosmaKesslerGebhardtetal.2020,
  author    = {Cosma, Cosmin and Kessler, Julia and Gebhardt, Andreas and Campbell, Ian and Balc, Nicolae},
  title     = {Improving the Mechanical Strength of Dental Applications and Lattice Structures SLM Processed},
  series = {Materials},
  volume    = {13},
  journal   = {Materials},
  number    = {4},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {1996-1944},
  doi       = {10.3390/ma13040905},
  pages     = {1 -- 18},
  year      = {2020},
  abstract  = {To manufacture custom medical parts or scaffolds with reduced defects and high mechanical characteristics, new research on optimizing the selective laser melting (SLM) parameters are needed. In this work, a biocompatible powder, 316L stainless steel, is characterized to understand the particle size, distribution, shape and flowability. Examination revealed that the 316L particles are smooth, nearly spherical, their mean diameter is 39.09 μm and just 10\% of them hold a diameter less than 21.18 μm. SLM parameters under consideration include laser power up to 200 W, 250-1500 mm/s scanning speed, 80 μm hatch spacing, 35 μm layer thickness and a preheated platform. The effect of these on processability is evaluated. More than 100 samples are SLM-manufactured with different process parameters. The tensile results show that is possible to raise the ultimate tensile strength up to 840 MPa, adapting the SLM parameters for a stable processability, avoiding the technological defects caused by residual stress. Correlating with other recent studies on SLM technology, the tensile strength is 20\% improved. To validate the SLM parameters and conditions established, complex bioengineering applications such as dental bridges and macro-porous grafts are SLM-processed, demonstrating the potential to manufacture medical products with increased mechanical resistance made of 316L.},
  language  = {en}
}
@article{Wollert2016,
  author    = {Wollert, J{\"o}rg},
  title     = {Industrial Internet of Things : Seifenblase oder Revolution},
  series = {Elektronik},
  journal   = {Elektronik},
  number    = {7},
  publisher = {WEKA-Fachmedien},
  address   = {M{\"u}nchen},
  issn      = {0013-5658},
  pages     = {39 -- 45},
  year      = {2016},
  language  = {de}
}
@book{OPUS4-4303,
  title     = {Ingenieurfreunde FH Aachen : 75 Jahre F{\"o}rderverein; Elektrotechnik und Informationstechnik, Luft- und Raumfahrttechnik, Maschinenbau und Mechatronik / [Hrsg.: Ingenieurfreunde FH Aachen e. V. ; Red.: H. J. Raatschen]},
  editor    = {Raatschen, Hans-J{\"u}rgen},
  publisher = {Klinkenberg},
  address   = {Aachen},
  isbn      = {978-3-941704-03-9},
  pages     = {112 S. : Ill., graph. Darst.},
  year      = {2010},
  language  = {de}
}
@article{Klocke2003,
  author    = {Klocke, Martina},
  title     = {Ingenieurinnen dringend gesucht},
  series = {Von der Dampfmaschine zur Brennstoffzelle : 100 Jahre Ingenieurausbildung in Kiel / [Hrsg. Fachhochschule Kiel. Red. Martina Klocke]},
  journal   = {Von der Dampfmaschine zur Brennstoffzelle : 100 Jahre Ingenieurausbildung in Kiel / [Hrsg. Fachhochschule Kiel. Red. Martina Klocke]},
  publisher = {Fachhochschule},
  address   = {Kiel},
  pages     = {52 -- 55},
  year      = {2003},
  language  = {de}
}
@article{Raatschen2003,
  author    = {Raatschen, Hans-J{\"u}rgen},
  title     = {Ingenieurstudium Hundert Jahre : von der K{\"o}niglichen H{\"o}heren Maschinenbauschule Aachen zu den Ingenieurfachbereichen der Fachhochschule},
  series = {Fachblatt},
  volume    = {2003},
  journal   = {Fachblatt},
  number    = {1},
  organization    = {FH Aachen, University of Applied Sciences},
  pages     = {28 -- 29},
  year      = {2003},
  language  = {de}
}
@book{Gartzen2013,
  author    = {Gartzen, Johannes},
  title     = {Innovation durch Kooperation : wie der Mittelstand durch Zusammenarbeit mit den Hochschulen seine Wettbewerbsf{\"a}higkeit steigert : Festschrift f{\"u}r Prof. Dr. rer. nat. Johannes Gartzen},
  publisher = {Apprimus Verl.},
  address   = {Aachen},
  isbn      = {978-3-86359-136-6},
  pages     = {III, 188 S. : Ill.},
  year      = {2013},
  language  = {de}
}
@article{Schmitt2005,
  author    = {Schmitt, Rolf W.},
  title     = {Innovationen bei Schmierstoffen und tribologischen Systemen},
  series = {Stahl und Eisen. 125 (2005), H. 3},
  journal   = {Stahl und Eisen. 125 (2005), H. 3},
  isbn      = {0340-4803},
  pages     = {51 -- 53},
  year      = {2005},
  language  = {de}
}
@article{GebhardtPlug1995,
  author    = {Gebhardt, Andreas and Plug, T-K.},
  title     = {Innovationsschub mittels Rapid-Prototyping, Teil II},
  series = {CAD-CAM Report. 14 (1995), H. 9},
  journal   = {CAD-CAM Report. 14 (1995), H. 9},
  isbn      = {0930-7117},
  pages     = {78 -- 85},
  year      = {1995},
  language  = {de}
}
@article{GebhardtPflug1995,
  author    = {Gebhardt, Andreas and Pflug, T-K.},
  title     = {Innovationsschub mittels Rapid-Prototyping. Teil I},
  series = {CAD-CAM Report. 14 (1995), H. 7},
  journal   = {CAD-CAM Report. 14 (1995), H. 7},
  isbn      = {0930-7117},
  pages     = {56 -- 65},
  year      = {1995},
  language  = {de}
}
@article{KlockeLenk1993,
  author    = {Klocke, Martina and Lenk, Antje},
  title     = {Innovationstransfer auf der Basis von Akzeptanz und Zusammenarbeit / Lenk, Antje ; Klocke, Martina},
  series = {Berufsbildung in Wissenschaft und Praxis. BWP. 22 (1993), H. 5},
  journal   = {Berufsbildung in Wissenschaft und Praxis. BWP. 22 (1993), H. 5},
  isbn      = {0341-4515},
  pages     = {43 -- 45},
  year      = {1993},
  language  = {de}
}
@article{RoesnerScheikOlowinskyetal.2011,
  author    = {Roesner, Andreas and Scheik, Sven and Olowinsky, Alexander and Gillner, Arnold and Propawe, Reinhart and Schleser, Markus and Reisgen, Uwe},
  title     = {Innovative approach of joining hybrid components},
  series = {Journal of laser applications},
  volume    = {Vol. 23},
  journal   = {Journal of laser applications},
  number    = {Iss. 3},
  publisher = {Laser Institute of America},
  address   = {Orlando, Fla.},
  issn      = {1042-346X},
  pages     = {32007},
  year      = {2011},
  language  = {en}
}
@article{GlowaniaGriesSchoeneetal.2011,
  author    = {Glowania, Michael and Gries, Thomas and Schoene, Jens and Schleser, Markus and Reisgen, Uwe},
  title     = {Innovative coating technology for textile reinforcements of concrete applications},
  series = {13th International Congress on Polymers in Concrete : 10 - 12 February 2010, Funchal, Madeira, Portugal.(Key engineering materials. Vol. 466)},
  journal   = {13th International Congress on Polymers in Concrete : 10 - 12 February 2010, Funchal, Madeira, Portugal.(Key engineering materials. Vol. 466)},
  publisher = {Trans Tech Publications},
  address   = {B{\"a}ch},
  organization    = {International Congress Polymers in Concrete <13, 2010, Funchal, Madeira>},
  isbn      = {978-3-03785-008-4},
  issn      = {1013-9826 (E-Journal) ; 0252-1059 (Print)},
  pages     = {167 -- 173},
  year      = {2011},
  language  = {en}
}
@inproceedings{GerhardsSchleserOttenetal.2019,
  author    = {Gerhards, Benjamin and Schleser, Markus and Otten,, Christian and Schwarz, Alexander and Gebhardt, Andreas},
  title     = {Innovative Laser Beam Joining Technology for Additive Manufactured Parts},
  series = {Conference Proceedings 72nd IIW Annual Assembly and International Conference, 7-12 July 2019, Bratislava},
  booktitle = {Conference Proceedings 72nd IIW Annual Assembly and International Conference, 7-12 July 2019, Bratislava},
  pages     = {1 -- 8},
  year      = {2019},
  language  = {en}
}
@inproceedings{OttenGerhardsSchleseretal.2019,
  author    = {Otten, Christian and Gerhards, Benjamin and Schleser, Markus and Schwarz, A. and Gebhardt, Andreas},
  title     = {Innovative Laserschweißtechnologie f{\"u}r additiv gefertigte Bauteile},
  series = {Große Schweißtechnische Tagung},
  booktitle = {Große Schweißtechnische Tagung},
  publisher = {DVS-Media},
  address   = {D{\"u}sseldorf},
  isbn      = {978-3-96144-066-5},
  pages     = {150 -- 157},
  year      = {2019},
  language  = {de}
}
@inproceedings{KolkmannGriesSchleseretal.2005,
  author    = {Kolkmann, Annette and Gries, Thomas and Schleser, Markus and Dilthey, Ulrich},
  title     = {Innovative yarn structures and coatings for textile reinforced concrete},
  series = {All lectures / Techtextil Symposium : 6. - 9. 6.2005, Frankfurt am Main},
  booktitle = {All lectures / Techtextil Symposium : 6. - 9. 6.2005, Frankfurt am Main},
  address   = {Frankfurt a.M.},
  pages     = {1 CD-ROM},
  year      = {2005},
  language  = {en}
}
@inproceedings{SchuermannMannBudaetal.2009,
  author    = {Sch{\"u}rmann, Volker and Mann, Thorsten and Buda, Aurel and Wollert, J{\"o}rg},
  title     = {Integrating bluetooth localization into existing TCP/IP networks},
  series = {IEEE International Workshop on Intelligent Data Acquisition and Advanced Computing Systems: Technology and Applications, 2009 : IDAACS 2009 ; Rende, Cosenza, Italy, 21 - 23 Sept. 2009},
  booktitle = {IEEE International Workshop on Intelligent Data Acquisition and Advanced Computing Systems: Technology and Applications, 2009 : IDAACS 2009 ; Rende, Cosenza, Italy, 21 - 23 Sept. 2009},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  organization    = {International Workshop on Intelligent Data Acquisition and Advanced Computing Systems <5, 2009, Rende, Cosenza, Italy>},
  isbn      = {978-1-4244-4882-1 ; ISBN: 978-1-4244-4901-9},
  doi       = {10.1109/IDAACS.2009.5342903},
  pages     = {621 -- 624},
  year      = {2009},
  language  = {en}
}
@inproceedings{WiezikHoetterGebhardt2015,
  author    = {Wiezik, P. and H{\"o}tter, Jan-Steffen and Gebhardt, Andreas},
  title     = {Integration des Laserpolierens in den SLM-Prozess},
  series = {DVS Congress 2015, Große Schweißtechnische Tagung, DVS-Studentenkongress, F{\"u}gen von faserverst{\"a}rkten Kunststoffen, Anwendungsnahe Schweißsimulation, Vortr{\"a}ge der Veranstaltungen, N{\"u}rnberg, DE, 15.-17. Sep, 2015},
  volume    = {315},
  booktitle = {DVS Congress 2015, Große Schweißtechnische Tagung, DVS-Studentenkongress, F{\"u}gen von faserverst{\"a}rkten Kunststoffen, Anwendungsnahe Schweißsimulation, Vortr{\"a}ge der Veranstaltungen, N{\"u}rnberg, DE, 15.-17. Sep, 2015},
  publisher = {Verl. f{\"u}r Schweißen und verwandte Verfahren, DVS-Verl.},
  address   = {D{\"u}sseldorf},
  isbn      = {978-3-945023-46-4},
  pages     = {117 -- 120},
  year      = {2015},
  language  = {de}
}
@inproceedings{UlmerLaiChengetal.2019,
  author    = {Ulmer, Jessica and Lai, Chow Yin and Cheng, Chi-Tsun and Wollert, J{\"o}rg},
  title     = {Integration von VR und AR in Produktlebenszyklen - Eine {\"U}bersicht {\"u}ber die Nutzung virtueller Technologien im industriellen Umfeld},
  series = {Automation 2019},
  booktitle = {Automation 2019},
  pages     = {1 -- 12},
  year      = {2019},
  language  = {de}
}
@inproceedings{ReisgenSchleserMokrovetal.2009,
  author    = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Ahmed, Essam and Schmidt, Andre and Rossiter, Eduardo},
  title     = {Integrative Berechnung von Verzug und Eigenspannungen auf Basis realer Schweißparameter},
  series = {Tagungsband / SYSWELD-Forum 2009 : 22. - 23. Oktober 2009, Weimar},
  booktitle = {Tagungsband / SYSWELD-Forum 2009 : 22. - 23. Oktober 2009, Weimar},
  editor    = {Hildebrand, J{\"o}rg},
  publisher = {Univ.-Verl.},
  address   = {Weimar},
  isbn      = {978-3-86068-401-6},
  pages     = {32 -- 41},
  year      = {2009},
  language  = {de}
}
@article{Knepper1984,
  author    = {Knepper, Ludger},
  title     = {Integrierte Hochregallager als materialflusstechnische Knotenpunkte moderner Produktions- und Umschlaganlagen},
  pages     = {93 -- 100},
  year      = {1984},
  language  = {de}
}
@article{Knepper1984,
  author    = {Knepper, Ludger},
  title     = {Integrierte Hochregallager als materialflusstechnische Knotenpunkte moderner Produktions- und Umschlaganlagen},
  series = {Deutsche Hebe- und Foerdertechnik. 30 (1984), H. 12},
  journal   = {Deutsche Hebe- und Foerdertechnik. 30 (1984), H. 12},
  isbn      = {0012-0278},
  pages     = {88 -- 93},
  year      = {1984},
  language  = {de}
}
@article{StarkeHackel2004,
  author    = {Starke, G{\"u}nther and Hackel, Matthias},
  title     = {Integrierte Oberfl{\"a}chendigitalisierung f{\"u}r die flexible Automatisierung bei kleinen Losgr{\"o}ßen},
  series = {Mechatronics \& robotics 2004 : Aachen, Germany, September 13 - 15, 2004 / [IEEE ...]. Drews, Paul [ed.]},
  journal   = {Mechatronics \& robotics 2004 : Aachen, Germany, September 13 - 15, 2004 / [IEEE ...]. Drews, Paul [ed.]},
  publisher = {Eysoldt},
  address   = {Aachen},
  isbn      = {3-938153-30-X},
  pages     = {271 -- 275},
  year      = {2004},
  language  = {de}
}
@article{Starke2002,
  author    = {Starke, G{\"u}nther},
  title     = {Integriertes Fertigungskonzept zum automatisierten Reparaturschweißen mit Robotern},
  series = {DVS-Berichte. 217 (2002)},
  journal   = {DVS-Berichte. 217 (2002)},
  isbn      = {0418-9639},
  pages     = {10 -- 13},
  year      = {2002},
  language  = {de}
}
@inproceedings{SchuermannKellerWollert2009,
  author    = {Sch{\"u}rmann, Volker and Keller, Alex and Wollert, J{\"o}rg},
  title     = {Internet based middleware approach for building services},
  series = {Proceedings / IMETI 2009, the 2nd International Multi-Conference on Engineering and Technological Innovation : July 10 - 13, 2009 Orlando, Florida, USA ; vol. 1},
  booktitle = {Proceedings / IMETI 2009, the 2nd International Multi-Conference on Engineering and Technological Innovation : July 10 - 13, 2009 Orlando, Florida, USA ; vol. 1},
  publisher = {IIIS},
  address   = {Winter Garden, Fla.},
  organization    = {International Multi-Conference on Engineering and Technological Innovation <2, 2009, Orlando, Fla.>},
  isbn      = {1-934272-68-X ; 978-1-934272-68-8},
  pages     = {30 -- 34},
  year      = {2009},
  language  = {en}
}
@inproceedings{ThomasWollert2000,
  author    = {Thomas, F. and Wollert, J{\"o}rg},
  title     = {Internet und OO-Systeme in der Logistik},
  series = {Risikofaktor Software : Tagung Mannheim, 21. und 22.November 2000. (VDI-Berichte ; 1577)},
  booktitle = {Risikofaktor Software : Tagung Mannheim, 21. und 22.November 2000. (VDI-Berichte ; 1577)},
  publisher = {VDI-Verl.},
  address   = {H{\"u}thig},
  organization    = {Gesellschaft F{\"o}rdertechnik, Materialfluss und Logistik},
  isbn      = {3180915773},
  pages     = {149 -- 164},
  year      = {2000},
  language  = {de}
}
@inproceedings{Wollert2000,
  author    = {Wollert, J{\"o}rg},
  title     = {Internettechnologie und Multimedia f{\"u}r Steuerungssysteme},
  series = {Tagungsband - SPS/IPC/Drives 2000 : elektrische Automatisierung - Systeme und Komponenten ; 11. Fachmesse \& Kongress 28. - 30. Nov. 2000, N{\"u}rnberg. (Praxiswissen : Automatisierung)},
  booktitle = {Tagungsband - SPS/IPC/Drives 2000 : elektrische Automatisierung - Systeme und Komponenten ; 11. Fachmesse \& Kongress 28. - 30. Nov. 2000, N{\"u}rnberg. (Praxiswissen : Automatisierung)},
  publisher = {H{\"u}thig},
  address   = {Heidelberg},
  organization    = {SPS IPC Drives <11, 2000, N{\"u}rnberg>},
  isbn      = {3-7785-2836-X},
  pages     = {78 -- 86},
  year      = {2000},
  language  = {de}
}
@incollection{FateriGebhardt2020,
  author    = {Fateri, Miranda and Gebhardt, Andreas},
  title     = {Introduction to Additive Manufacturing},
  series = {3D Printing of Optical Components},
  booktitle = {3D Printing of Optical Components},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-58960-8},
  doi       = {10.1007/978-3-030-58960-8_1},
  pages     = {1 -- 22},
  year      = {2020},
  abstract  = {Additive manufacturing (AM) works by creating objects layer by layer in a manner similar to a 2D printer with the "printed" layers stacked on top of each other. The layer-wise manufacturing nature of AM enables fabrication of freeform geometries which cannot be fabricated using conventional manufacturing methods as a one part. Depending on how each layer is created and bonded to the adjacent layers, different AM methods have been developed. In this chapter, the basic terms, common materials, and different methods of AM are described, and their potential applications are discussed.},
  language  = {en}
}
@inproceedings{ReisgenSchleserAbdurakhmanovetal.2011,
  author    = {Reisgen, Uwe and Schleser, Markus and Abdurakhmanov, Aydemir and Turichin, Gleb and Valdaitseva, Elena and Bach, Friedrich-Wilhelm and Hassel, Thomas and Beniyashi, Alexander},
  title     = {Investigation of factors for defect-free weld formation by non-vacuum electron beam welding},
  series = {Laser technologies in welding and materials processing : proceedings of the fifth international conference, 24 - 27 May 2011, Katsiveli, Crimea, Ukraine},
  booktitle = {Laser technologies in welding and materials processing : proceedings of the fifth international conference, 24 - 27 May 2011, Katsiveli, Crimea, Ukraine},
  publisher = {Paton Publ. House},
  address   = {Kiev},
  pages     = {104 -- 109},
  year      = {2011},
  language  = {en}
}
@inproceedings{HuberBleckScheiketal.2011,
  author    = {Huber, Fr{\´e}d{\´e}ric and Bleck, Wolfgang and Scheik, Sven and Schleser, Markus and Reisgen, Uwe},
  title     = {Investigation of galvanneal coating adherence in adhesive bonded joints using lap shear test},
  series = {Galvatech 2011 : 8th International Conference on Zinc and Zinc Alloy Coated Steel Sheet, June 21 - 24, 2011, Genova (Italy) ; proceedings},
  booktitle = {Galvatech 2011 : 8th International Conference on Zinc and Zinc Alloy Coated Steel Sheet, June 21 - 24, 2011, Genova (Italy) ; proceedings},
  publisher = {Associazione Italiana di Metallurgia},
  address   = {Mailand},
  organization    = {International Conference on Zinc and Zinc Alloy Coated Steel Sheet <8, 2011, Genua>},
  isbn      = {978-88-85298-82-8},
  pages     = {Paper No. 43},
  year      = {2011},
  language  = {en}
}
@article{DiltheySchleserFeldmannetal.2008,
  author    = {Dilthey, Ulrich and Schleser, Markus and Feldmann, Martin and Pak, Daniel and Geßler, Achim},
  title     = {Investigation of punctiform, plane and hybrid joints of textile-reinforced concrete parts},
  series = {Cement and concrete composites},
  volume    = {Vol. 30},
  journal   = {Cement and concrete composites},
  number    = {iss. 2},
  issn      = {0958-9465},
  pages     = {82 -- 87},
  year      = {2008},
  language  = {en}
}
@article{AnikFrohberg1983,
  author    = {Anik, Sabri and Frohberg, Martin G.},
  title     = {Investigation of the thermodynamics of oxygen and the determination of phase boundaries in the system copper-oxygen-bismuth at 12000C},
  series = {Zeitschrift f{\"u}r Metallkunde},
  volume    = {74},
  journal   = {Zeitschrift f{\"u}r Metallkunde},
  number    = {8},
  issn      = {0044-3093},
  pages     = {530 -- 534},
  year      = {1983},
  language  = {en}
}
@inproceedings{ReisgenSchleserSchoeneetal.2012,
  author    = {Reisgen, Uwe and Schleser, Markus and Schoene, Jens and Hegger, Josef and Gallwoszus, J{\"o}rg and Feldmann, Markus and Kopp, Maik and G{\"u}ndel, Max},
  title     = {Investigation on bond mechanisms of innovative small-scale shear connectors between steel and concrete},
  series = {Bond in concrete 2012. Vol. 2. Bond in new materials and under severe conditions},
  booktitle = {Bond in concrete 2012. Vol. 2. Bond in new materials and under severe conditions},
  editor    = {Cairns, John W.},
  publisher = {Publisher creations},
  address   = {Manerbio, Brescia},
  isbn      = {978-88-907078-3-4},
  pages     = {893 -- 898},
  year      = {2012},
  language  = {en}
}
@inproceedings{WeissHeslenfeldSaeweetal.2022,
  author    = {Weiss, Christian and Heslenfeld, Jonas and Saewe, Jasmin Kathrin and Bremen, Sebastian and H{\"a}fner, Constantin Leon},
  title     = {Investigation on the influence of powder humidity in Laser Powder Bed Fusion (LPBF)},
  series = {Procedia CIRP 12th CIRP Conference on Photonic Technologies [LANE 2022]},
  volume    = {111},
  booktitle = {Procedia CIRP 12th CIRP Conference on Photonic Technologies [LANE 2022]},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {2212-8271},
  doi       = {10.1016/j.procir.2022.08.102},
  pages     = {115 -- 120},
  year      = {2022},
  abstract  = {In the Laser Powder Bed Fusion (LPBF) process, parts are built out of metal powder material by exposure of a laser beam. During handling operations of the powder material, several influencing factors can affect the properties of the powder material and therefore directly influence the processability during manufacturing. Contamination by moisture due to handling operations is one of the most critical aspects of powder quality. In order to investigate the influences of powder humidity on LPBF processing, four materials (AlSi10Mg, Ti6Al4V, 316L and IN718) are chosen for this study. The powder material is artificially humidified, subsequently characterized, manufactured into cubic samples in a miniaturized process chamber and analyzed for their relative density. The results indicate that the processability and reproducibility of parts made of AlSi10Mg and Ti6Al4V are susceptible to humidity, while IN718 and 316L are barely influenced.},
  language  = {en}
}
@article{AnikFrohberg1984,
  author    = {Anik, Sabri and Frohberg, Martin G.},
  title     = {Investigations of the thermodynamics of oxygen and the determination of the miscibility gap in the system copper-oxygen-lead at 12000C},
  series = {Zeitschrift f{\"u}r Metallkunde},
  volume    = {75},
  journal   = {Zeitschrift f{\"u}r Metallkunde},
  number    = {8},
  issn      = {0044-3093},
  pages     = {586 -- 589},
  year      = {1984},
  language  = {en}
}
@book{Hanrath1988,
  author    = {Hanrath, Wilhelm},
  title     = {Irreduzible Darstellungen von Raumgruppen},
  address   = {Aachen},
  pages     = {250 S.},
  year      = {1988},
  language  = {de}
}