@article{ReisgenSchleserMokrovetal.2012,
  author    = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Ahmed, Essam},
  title     = {Statistical modeling of laser welding of DP/TRIP steel sheets},
  series = {Optics and laser technology},
  volume    = {44},
  journal   = {Optics and laser technology},
  number    = {1},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1879-2545 (E-Journal); 0030-3992 (Print); 0308-4280 (Print)},
  doi       = {10.1016/j.optlastec.2011.05.025},
  pages     = {92 -- 101},
  year      = {2012},
  abstract  = {In this research work, a statistical analysis of the CO2 laser beam welding of dual phase (DP600)/transformation induced plasticity (TRIP700) steel sheets was done using response surface methodology. The analysis considered the effect of laser power (2-2.2 kW), welding speed (40-50 mm/s) and focus position (-1 to 0 mm) on the heat input, the weld bead geometry, uniaxial tensile strength, formability limited dome height and welding operation cost. The experimental design was based on Box-Behnken design using linear and quadratic polynomial equations for predicting the mathematical models. The results indicate that the proposed models predict the responses adequately within the limits of welding parameters being used and the welding speed is the most significant parameter during the welding process.},
  language  = {en}
}
@article{ReisgenSchleserMokrovetal.2012,
  author    = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Ahmed, Essam},
  title     = {Optimization of laser welding of DP/TRIP steel sheets using statistical approach},
  series = {Optics and laser technology},
  volume    = {44},
  journal   = {Optics and laser technology},
  number    = {1},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1879-2545 (E-Journal); 0030-3992 (Print); 0308-4280 (Print)},
  doi       = {10.1016/j.optlastec.2011.06.028},
  pages     = {255 -- 262},
  year      = {2012},
  abstract  = {Generally, the quality of a weld joint is directly influenced by the welding input parameter settings. Selection of proper process parameters is important to obtain the desired weld bead profile and quality. In this research work, numerical and graphical optimization techniques of the CO2 laser beam welding of dual phase (DP600)/transformation induced plasticity (TRIP700) steel sheets were carried out using response surface methodology (RSM) based on Box-Behnken design. The procedure was established to improve the weld quality, increase the productivity and minimize the total operation cost by considering the welding parameters range of laser power (2-2.2 kW), welding speed (40-50 mm/s) and focus position (-1 to 0 mm). It was found that, RSM can be considered as a powerful tool in experimental welding optimization, even when the experimenter does not have a model for the process. Strong, efficient and low cost weld joints could be achieved using the optimum welding conditions.},
  language  = {en}
}
@article{ReisgenOlschokJakobsetal.2012,
  author    = {Reisgen, Uwe and Olschok, Simon and Jakobs, Stefan and Schleser, Markus and Mokrov, Oleg and Rossiter, Eduardo},
  title     = {Laser beam submerged arc hybrid welding},
  series = {Physics procedia},
  volume    = {39},
  journal   = {Physics procedia},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1875-3892},
  doi       = {10.1016/j.phpro.2012.10.016},
  pages     = {75 -- 83},
  year      = {2012},
  abstract  = {The laser beam-submerged arc hybrid welding method originates from the knowledge that, with increasing penetration depth, the laser beam process has a tendency to pore formation in the lower weld regions. The coupling with the energy-efficient submerged-arc process improves degassing and reduces the tendency to pore formation. The high deposition rate of the SA process in combination with the laser beam process offers, providing the appropriate choice of weld preparation, the possibility of welding plates with a thickness larger than 20° mm in a single pass, and also of welding thicker plates with the double-sided single pass technique.},
  language  = {en}
}
@article{ReisgenSchleserAbdurakhmanovetal.2012,
  author    = {Reisgen, Uwe and Schleser, Markus and Abdurakhmanov, Aydemir and Gumenyuk, Andrey},
  title     = {Measuring of plasma properties induced by non-vacuum electron beam welding},
  series = {Physics of plasma},
  volume    = {19},
  journal   = {Physics of plasma},
  number    = {1},
  publisher = {AIP Publishing},
  address   = {Melville, NY},
  issn      = {1089-7674 (E-Journal); 1070-664X (Print)},
  doi       = {10.1063/1.3675874},
  pages     = {1 -- 7},
  year      = {2012},
  abstract  = {Electron beam plasma measurement was realised by means of DIABEAM system invented by ISF RWTH Aachen. The Langmuir probe method is used for measurement. The relative simplicity of the method and the possibility of dispersion of high power on the probe allow its application for the investigation of high-power electron beams. The key element of the method is a rotating thin tungsten wire, which intersects the beam transversely on its axis and collects part of the current by itself. The signals, which are registered in the DIABEAM as a voltage, were taken in the form of amplitude. The conversion of the probe current into the distribution along the beam radius was realised using the Abel's method. A voltage-current characteristic was built for the beam current. The local electron density as well as the electron temperature, the floating potential and the plasma potential were measured and calculated by means of this characteristic.},
  language  = {en}
}
@article{ReisgenSchleserMokrovetal.2012,
  author    = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Zabirov, Alexander and F{\"u}ssel, Uwe and Schnick, Michael and Hertel, Martin and Jaeckel, Sebastian},
  title     = {Modellierung und Visualisierung der MSG-Lichtbogenprozesse},
  series = {Schweissen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren},
  volume    = {64},
  journal   = {Schweissen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren},
  number    = {4},
  publisher = {DVS Verlag},
  address   = {D{\"u}sseldorf},
  issn      = {0036-7184},
  pages     = {166 -- 174},
  year      = {2012},
  language  = {de}
}
@article{ScheikSchleserReisgen2012,
  author    = {Scheik, Sven and Schleser, Markus and Reisgen, Uwe},
  title     = {Thermisches Direktf{\"u}gen von Metall und Kusntstoff: eine Alternative zur Klebtechnik},
  series = {Adh{\"a}sion : Kleben \& Dichten},
  volume    = {56},
  journal   = {Adh{\"a}sion : Kleben \& Dichten},
  number    = {11},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  issn      = {0001-8198 (E-Journal); 0001-8198 (Print)},
  doi       = {10.1007/s35145-012-0005-x},
  pages     = {36 -- 40},
  year      = {2012},
  abstract  = {Im Rahmen des Exzellenzclusters „Integrative Produktionstechnik f{\"u}r Hochlohnl{\"a}nder" der RWTHAachen University werden derzeit alternative Verfahren zur Herstellung von Metall/Kunststoff- Verbindungen untersucht. Eines davon ist das thermische Direktf{\"u}gen, das eine stoffschl{\"u}ssige Verbindung zwischen Kunststoff und Metall erm{\"o}glicht und ohne die Verwendung von Klebstoffen, Haftvermittlern oder mechanischen Verbindungshilfen auskommt.},
  language  = {de}
}
@article{ReisgenSchleserMokrovetal.2012,
  author    = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Zabirov, Alexander and F{\"u}ssel, Uwe and Schnick, Michael and Hertel, Martin and Jaeckel, Sebastian},
  title     = {Modelling and visualisation of the GMA process},
  series = {Welding and Cutting},
  volume    = {11},
  journal   = {Welding and Cutting},
  number    = {4},
  publisher = {DVS Verlag},
  address   = {D{\"u}sseldorf},
  issn      = {1612-3433},
  pages     = {242 -- 249},
  year      = {2012},
  language  = {en}
}
@article{ReisgenSchleserSchiebahn2013,
  author    = {Reisgen, Uwe and Schleser, Markus and Schiebahn, Alexander},
  title     = {Untersuchung zum Einfluss von Maschineneigenschaften von Schweißzangen zum Widerstandspunktschweißen auf das Schweißergebnis},
  series = {Schweissen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren},
  volume    = {Bd. 65},
  journal   = {Schweissen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren},
  number    = {H. 6},
  publisher = {DVS Verl.},
  address   = {D{\"u}sseldorf},
  issn      = {0036-7184},
  pages     = {309 -- 313},
  year      = {2013},
  language  = {de}
}
@article{RamazaniLiMukherjeeetal.2013,
  author    = {Ramazani, Ali and Li, Yang and Mukherjee, Krishnendu and Prahl, Ulrich and Bleck, Wolfgang and Abdurakhmanov, Aydemir and Schleser, Markus and Reisgen, Uwe},
  title     = {Microstructure evolution simulation in hot rolled DP600 steel during gas metal arc welding},
  series = {Computational materials science},
  volume    = {Vol. 68},
  journal   = {Computational materials science},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1879-0801 (E-Book); 0927-0256 (Print)},
  pages     = {107 -- 116},
  year      = {2013},
  language  = {en}
}
@article{HoetterFateriGebhardt2012,
  author    = {H{\"o}tter, Jan-Steffen and Fateri, Miranda and Gebhardt, Andreas},
  title     = {Selective laser melting of metals: desktop machines open up new chances even for small companies},
  series = {Advanced materials research},
  volume    = {622-623},
  journal   = {Advanced materials research},
  publisher = {Trans Tech Publ.},
  address   = {Baech},
  issn      = {1662-8985 (E-Journal); 1022-6680 (Print)},
  doi       = {10.4028/www.scientific.net/AMR.622-623.461},
  pages     = {461 -- 465},
  year      = {2012},
  abstract  = {Additive manufacturing (AM) of metal parts by using Selective Laser Melting (SLM) has become a powerful tool mostly in the area of automotive, aerospace engineering and others. Especially in the field of dentistry, jewelry and related branches that require individualized or even one-of-a-kind products, the direct digital manufacturing process opens up new ways of design and manufacturing. In these fields, mostly small and medium sized businesses (SME) are operating which do not have sufficient human and economic resources to invest in this technology. But to stay competitive, the application of AM can be regarded as a necessity. In this situation a new desktop machine (Realizer SLM 50) was introduced that cost about 1/3 of a shop floor SLM machine and promises small quality parts. To find out whether the machine really is an alternative for SMEs the University of Applied Science, Aachen, Germany, designed, build and optimized typical parts from the dentistry and the jewelry branches using CoCr and silver material, the latter being new with this application. The paper describes the SLM procedure and how to find and optimize the most important parameters. The test is accompanied by digital simulation in order to verify the build parameters and to plan future builds. The procedure is shown as well as the resulting parts made from CoCr and silver material.},
  language  = {en}
}
@article{StarkeAhlbehrendtBischoffetal.2009,
  author    = {Starke, G{\"u}nther and Ahlbehrendt, Norbert and Bischoff, Rainer and Melzer, Harald and Sieber, Sven and Senk, Burkhard and Kramarczyk, Peter},
  title     = {RoboTOOL. Technologien f{\"u}r den ortsflexiblen Einsatz von Robotern bei tempor{\"a}ren Arbeitsaufgaben in der Fertigung},
  series = {wt Werkstattstechnik online},
  volume    = {Bd. 99},
  journal   = {wt Werkstattstechnik online},
  number    = {H. 9},
  issn      = {1436-4980},
  pages     = {661 -- 670},
  year      = {2009},
  language  = {de}
}
@article{GebhardtFateri2014,
  author    = {Gebhardt, Andreas and Fateri, Miranda},
  title     = {3D-Drucken und die Anwendungen},
  series = {RTejournal - Forum f{\"u}r Rapid Technologie},
  volume    = {11 (2014)},
  journal   = {RTejournal - Forum f{\"u}r Rapid Technologie},
  number    = {1},
  issn      = {1614-0923},
  pages     = {1 -- 9},
  year      = {2014},
  language  = {de}
}
@article{GebhardtHoetterZiebura2014,
  author    = {Gebhardt, Andreas and H{\"o}tter, Jan-Steffen and Ziebura, Dawid},
  title     = {Impact of SLM build parameters on the surface quality},
  series = {RTejournal - Forum f{\"u}r Rapid Technologien},
  volume    = {11 (2014)},
  journal   = {RTejournal - Forum f{\"u}r Rapid Technologien},
  number    = {1},
  issn      = {1614-0923},
  pages     = {1 -- 14},
  year      = {2014},
  language  = {de}
}
@article{Wollert1998,
  author    = {Wollert, J{\"o}rg},
  title     = {Im Sog des Standards : Windows CE als Betriebssystem f{\"u}r Embedded Controller},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  volume    = {Bd. 47},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {H. 9},
  issn      = {0013-5658},
  pages     = {40 -- 51},
  year      = {1998},
  language  = {de}
}
@article{Wollert1998,
  author    = {Wollert, J{\"o}rg},
  title     = {Alles automatisch : komplexes qualit{\"a}tsorientiertes Logistikmanagement durch Vollautomatisierung},
  series = {Elektrotechnik f{\"u}r die Automatisierung},
  volume    = {Bd. 80},
  journal   = {Elektrotechnik f{\"u}r die Automatisierung},
  number    = {H. 4},
  issn      = {0013-581X},
  pages     = {196 -- 199},
  year      = {1998},
  language  = {de}
}
@article{Wollert1998,
  author    = {Wollert, J{\"o}rg},
  title     = {Zwergen-Anatomie : Aufbau von und Entwicklung f{\"u}r Windows CE},
  series = {C't : Magazin f{\"u}r Computertechnik},
  journal   = {C't : Magazin f{\"u}r Computertechnik},
  number    = {H. 8},
  issn      = {0724-8679},
  pages     = {148 -- 151},
  year      = {1998},
  language  = {de}
}
@article{Wollert2005,
  author    = {Wollert, J{\"o}rg},
  title     = {Softwaretrends in der Automatisierungstechnik},
  series = {Etz : Elektrotechnik \& Automation ; Organ des VDE Verband der Elektrotechnik Elektronik Informationstechnik e.V. und der Energietechnischen Gesellschaft im VDE (ETG) und der VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA)},
  volume    = {126},
  journal   = {Etz : Elektrotechnik \& Automation ; Organ des VDE Verband der Elektrotechnik Elektronik Informationstechnik e.V. und der Energietechnischen Gesellschaft im VDE (ETG) und der VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA)},
  number    = {S2},
  issn      = {0948-7387},
  pages     = {74 -- 79},
  year      = {2005},
  language  = {de}
}
@article{Wollert2005,
  author    = {Wollert, J{\"o}rg},
  title     = {Die n{\"a}chste "Generation Wireless" : Kommunikation mit hoher Bandbreite wird mobil},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler ; Sonderh. Wireless : Fachmedium f{\"u}r Entwicklungen funkbasierter Systeme},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler ; Sonderh. Wireless : Fachmedium f{\"u}r Entwicklungen funkbasierter Systeme},
  number    = {H. 2},
  issn      = {0013-5658 ; 1611-5120},
  pages     = {40 -- 44},
  year      = {2005},
  language  = {de}
}
@article{Wollert2007,
  author    = {Wollert, J{\"o}rg},
  title     = {UWB, ZigBee und Z-Wave in der Automatisierung : neue Konkurrenzsituation bei Short Range Wireless?},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  volume    = {Bd. 56},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {H. 2},
  issn      = {0013-5658},
  pages     = {62 -- 65},
  year      = {2007},
  language  = {de}
}
@article{WollertKruseVedral2007,
  author    = {Wollert, J{\"o}rg and Kruse, Thomas and Vedral, Andreas},
  title     = {Die Kraft der drei Antennen : zuverl{\"a}ssige Funkkommunikation f{\"u}r die Automatisierungstechnik},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler ; Sonderh. Wireless : Fachmedium f{\"u}r Entwicklungen funkbasierter Systeme},
  volume    = {56},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler ; Sonderh. Wireless : Fachmedium f{\"u}r Entwicklungen funkbasierter Systeme},
  number    = {Sonderh. 2},
  issn      = {0013-5658; 1611-5120},
  pages     = {36 -- 42},
  year      = {2007},
  language  = {de}
}
@article{Wollert1997,
  author    = {Wollert, J{\"o}rg},
  title     = {Zeitweise : Windows NT und die Echtzeit},
  series = {Elrad - Magazin f{\"u}r Elektronik und technische Rechneranwendungen},
  journal   = {Elrad - Magazin f{\"u}r Elektronik und technische Rechneranwendungen},
  number    = {H. 4},
  issn      = {0170-1827},
  pages     = {71 -- 73},
  year      = {1997},
  language  = {de}
}
@article{Wollert1997,
  author    = {Wollert, J{\"o}rg},
  title     = {Doping f{\"u}r den Betriebssystem-Kern : Echtzeit-L{\"o}sungen f{\"u}r Windows NT im Vergleich},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  volume    = {Bd. 46},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {H. 20},
  issn      = {0013-5658},
  pages     = {46 -- 50},
  year      = {1997},
  language  = {de}
}
@article{Wollert2007,
  author    = {Wollert, J{\"o}rg},
  title     = {Funk f{\"u}r die Sicherheit auf vier R{\"a}dern : Chancen und Herausforderungen in der Fahrzeug-Umwelt-Kommunikation},
  series = {Elektronik automotive : Magazin f{\"u}r Entwicklungen in der Kfz-Elektronik und Telematik},
  journal   = {Elektronik automotive : Magazin f{\"u}r Entwicklungen in der Kfz-Elektronik und Telematik},
  number    = {H. 8},
  issn      = {1614-0125},
  pages     = {78 -- 83},
  year      = {2007},
  language  = {de}
}
@article{WollertLeidinger2010,
  author    = {Wollert, J{\"o}rg and Leidinger, Rafael},
  title     = {Automation trifft Automotive : SPS in der Fahrzeugtechnik},
  series = {Elektronik automotive : Magazin f{\"u}r Entwicklungen in der Kfz-Elektronik und Telematik},
  journal   = {Elektronik automotive : Magazin f{\"u}r Entwicklungen in der Kfz-Elektronik und Telematik},
  number    = {4/5},
  publisher = {WEKA Fachmedien},
  address   = {Haar},
  issn      = {1614-0125},
  pages     = {44 -- 48},
  year      = {2010},
  abstract  = {Eine SPS im Kraftfahrzeug? Das geht ja gar nicht - da gibt es doch all die Hersteller f{\"u}r Kfz-Steuerger{\"a}te, die konfigurierbare Hardware anbieten. Im Prinzip ja, aber leider sind gerade die Sensoren oder Aktoren nicht ansteuerbar, die der Entwickler genau f{\"u}r sein aktuelles Projekt ben{\"o}tigt. Dieser Beitrag gibt einen kleinen Einblick in neue M{\"o}glichkeiten des Rapid Prototyping f{\"u}r mechatronische Systeme auf der Basis von Speicherprogrammierbaren Steuerungen (SPS).},
  language  = {de}
}
@article{Wollert2003,
  author    = {Wollert, J{\"o}rg},
  title     = {Dot net und Sun ONE - Wettbewerb oder Mitspieler? Neue Programmiermodelle machen das Web interaktiv},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  volume    = {Bd. 52},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {H. 19},
  issn      = {0013-5658},
  pages     = {72 -- 81},
  year      = {2003},
  language  = {de}
}
@article{WollertVedralGrimmetal.2004,
  author    = {Wollert, J{\"o}rg and Vedral, Andreas and Grimm, A. and Holtmann, M.},
  title     = {Bluetooth-Sicherheit : wie viel Pers{\"o}nlichkeit gebe ich preis?},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler ; Sonderh. Wireless : Fachmedium f{\"u}r Entwicklungen funkbasierter Systeme},
  volume    = {Bd. 53},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler ; Sonderh. Wireless : Fachmedium f{\"u}r Entwicklungen funkbasierter Systeme},
  number    = {Sonderh. M{\"a}rz},
  issn      = {0013-5658},
  pages     = {30 -- 35},
  year      = {2004},
  language  = {de}
}
@article{Wollert2004,
  author    = {Wollert, J{\"o}rg},
  title     = {Bluetooth, WLAN and ZigBee f{\"u}r die Automatisierungstechnik},
  series = {Etz : Elektrotechnik \& Automation},
  volume    = {Bd. 125},
  journal   = {Etz : Elektrotechnik \& Automation},
  number    = {H. 6},
  issn      = {0948-7387},
  pages     = {10 -- 18},
  year      = {2004},
  language  = {de}
}
@article{Wollert2004,
  author    = {Wollert, J{\"o}rg},
  title     = {Bluetooth in der Automatisierung : kabelfrei in eine bessere Zukunft},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  volume    = {Bd. 53},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {H. 14},
  issn      = {0013-5658},
  pages     = {42 -- 46},
  year      = {2004},
  language  = {de}
}
@article{Wollert1998,
  author    = {Wollert, J{\"o}rg},
  title     = {F{\"u}r viele, viele bunte Smarties : komplexes qualit{\"a}tsorientiertes Logistikmanagement durch Vollautomatisierung},
  series = {Fracht + Materialfluss : FM ; Technik und Praxis der Logistik},
  volume    = {30},
  journal   = {Fracht + Materialfluss : FM ; Technik und Praxis der Logistik},
  number    = {H. 6},
  issn      = {1430-9807},
  pages     = {30 -- 32},
  year      = {1998},
  language  = {de}
}
@article{Wollert1998,
  author    = {Wollert, J{\"o}rg},
  title     = {Komplexes qualit{\"a}tsorientiertes Logistikmanagement durch Vollautomatisierung},
  series = {Dhf : Intralogistik ; Fachzeitschrift f{\"u}r Intralogistik},
  volume    = {Bd. 44},
  journal   = {Dhf : Intralogistik ; Fachzeitschrift f{\"u}r Intralogistik},
  number    = {H. 1},
  issn      = {0723-7901},
  pages     = {14 -- 16},
  year      = {1998},
  language  = {de}
}
@article{Wollert1998,
  author    = {Wollert, J{\"o}rg},
  title     = {Die Produktionslogistik der Front- und Heckmodule f{\"u}r die Smart-Montage in Hambach},
  series = {Logistik f{\"u}r Unternehmen : das Fachmagazin der internen und externen Logistik},
  journal   = {Logistik f{\"u}r Unternehmen : das Fachmagazin der internen und externen Logistik},
  issn      = {0930-7834},
  pages     = {48 -- 51},
  year      = {1998},
  language  = {de}
}
@article{Wollert1999,
  author    = {Wollert, J{\"o}rg},
  title     = {Mit verwertbarem Aufwand : Portieren von Software auf Windows CE},
  series = {Elektrotechnik f{\"u}r die Automatisierung},
  journal   = {Elektrotechnik f{\"u}r die Automatisierung},
  issn      = {0013-581X},
  pages     = {46 -- 47},
  year      = {1999},
  language  = {de}
}
@article{Wollert1999,
  author    = {Wollert, J{\"o}rg},
  title     = {Betriebssysteme im Wettlauf : Elan-Entwicklungsboard mit Win CE und QNX},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  volume    = {Bd. 48},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {H. 11},
  issn      = {0013-5658},
  pages     = {86 -- 91},
  year      = {1999},
  language  = {de}
}
@article{Wollert1999,
  author    = {Wollert, J{\"o}rg},
  title     = {Die Kunst des Weglassens : Windows NT Embedded - Was die neue Version vom Standard-NT unterscheidet},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  volume    = {Bd. 48},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {H. 23},
  issn      = {0013-5658},
  pages     = {116 -- 121},
  year      = {1999},
  language  = {de}
}
@article{Wollert2000,
  author    = {Wollert, J{\"o}rg},
  title     = {Ethernet in der Automatisierungstechnik ; 1: Herk{\"o}mmliche Feldbusse im Vergleich zu Ethernet},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  volume    = {Bd. 49},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {H. 15},
  issn      = {0013-5658},
  pages     = {68 -- 77},
  year      = {2000},
  language  = {de}
}
@article{Wollert2000,
  author    = {Wollert, J{\"o}rg},
  title     = {Ethernet in der Automatisierungstechnik ; 2: Grenzen und M{\"o}glichkeiten des industriellen Ethernet-Einsatzes},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  volume    = {Bd. 49},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {H. 21},
  issn      = {0013-5658},
  pages     = {66 -- 75},
  year      = {2000},
  language  = {de}
}
@article{Wollert2001,
  author    = {Wollert, J{\"o}rg},
  title     = {Bluetooth aktuell - Technik und Anwendungen ; 1: Die Technik auf einen Blick},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  volume    = {Bd. 50},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {H. 17},
  issn      = {0013-5658},
  pages     = {80 -- 84},
  year      = {2001},
  language  = {de}
}
@article{Wollert2001,
  author    = {Wollert, J{\"o}rg},
  title     = {Bluetooth aktuell - Technik und Anwendungen ; 2: Die M{\"o}glichkeiten der Bluetooth-Technik},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  volume    = {Bd. 50},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {H. 18},
  issn      = {0013-5658},
  pages     = {68 -- 74},
  year      = {2001},
  language  = {de}
}
@article{Wollert2001,
  author    = {Wollert, J{\"o}rg},
  title     = {Bluetooth aktuell - Technik und Anwendungen ; 3: Rund um den Bluetooth-Protokollstack},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  volume    = {Bd. 50},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {H. 19},
  issn      = {0013-5658},
  pages     = {96 -- 103},
  year      = {2001},
  language  = {de}
}
@article{Wollert2001,
  author    = {Wollert, J{\"o}rg},
  title     = {Bluetooth aktuell - Technik und Anwendungen ; 5: Die Bluetooth-Host-Schnittstelle},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  volume    = {Bd. 50},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {H. 22},
  issn      = {0013-5658},
  pages     = {60 -- 65},
  year      = {2001},
  language  = {de}
}
@article{Wollert2001,
  author    = {Wollert, J{\"o}rg},
  title     = {Bluetooth aktuell - Technik und Anwendungen ; 6: Die Bluetooth-Host-Software},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  volume    = {Bd. 50},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {H. 23},
  issn      = {0013-5658},
  pages     = {50 -- 57},
  year      = {2001},
  language  = {de}
}
@article{Wollert2001,
  author    = {Wollert, J{\"o}rg},
  title     = {Bluetooth aktuell - Technik und Anwendungen ; 7: Angepasste Protokolle},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  volume    = {Bd. 50},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {H. 24},
  issn      = {0013-5658},
  pages     = {66 -- 72},
  year      = {2001},
  language  = {de}
}
@article{Wollert2001,
  author    = {Wollert, J{\"o}rg},
  title     = {Bluetooth aktuell - Technik und Anwendungen ; 8: Anwendungs-Profile},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  volume    = {Bd. 50},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {H. 25},
  issn      = {0013-5658},
  pages     = {66 -- 73},
  year      = {2001},
  language  = {de}
}
@article{Wollert2002,
  author    = {Wollert, J{\"o}rg},
  title     = {Bluetooth aktuell - Technik und Anwendungen ; 9: Bluetooth-Systementwicklung},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  volume    = {Bd. 51},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {H. 1},
  issn      = {0013-5658},
  pages     = {58 -- 63},
  year      = {2002},
  language  = {de}
}
@article{Wollert2002,
  author    = {Wollert, J{\"o}rg},
  title     = {Bluetooth aktuell - Technik und Anwendungen ; 10: Alternative Technologien},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  volume    = {Bd. 51},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {H. 2},
  issn      = {0013-5658},
  pages     = {50 -- 56},
  year      = {2002},
  language  = {de}
}
@article{WollertVedral2002,
  author    = {Wollert, J{\"o}rg and Vedral, Andreas},
  title     = {Einsatz von Open-Source-Software f{\"u}r Bluetooth-Evaluationsprototypen : Anwendungsempfehlungen und Einsatzbeispiele},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  volume    = {Bd. 51},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {H. 22},
  issn      = {0013-5658},
  pages     = {70 -- 73},
  year      = {2002},
  language  = {de}
}
@article{Wollert2002,
  author    = {Wollert, J{\"o}rg},
  title     = {Bluetooth im Automobil : derzeitiger Stand der Technik - und was danach kommt},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler ; Sonderh. Elektronik automotive : Magazin f{\"u}r Entwicklungen in der Kfz-Elektronik und Telematik},
  volume    = {Bd. 51},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler ; Sonderh. Elektronik automotive : Magazin f{\"u}r Entwicklungen in der Kfz-Elektronik und Telematik},
  number    = {Sonderh. Sept.},
  issn      = {0013-5658},
  pages     = {60 -- 63},
  year      = {2002},
  language  = {de}
}
@article{Wollert2002,
  author    = {Wollert, J{\"o}rg},
  title     = {Vierzig Jahre Software-Desaster : zehn Regeln als R{\"u}stzeug, um die Herausforderung Software-Entwicklung zu meistern},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  volume    = {Bd. 51},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {H. 25},
  issn      = {0013-5658},
  pages     = {110 -- 115},
  year      = {2002},
  language  = {de}
}
@article{Wollert2008,
  author    = {Wollert, J{\"o}rg},
  title     = {IT ins Auto! IP im Ethernet und der USB k{\"o}nnen im Kfz gut genutzt werden},
  series = {Elektronik automotive : Magazin f{\"u}r Entwicklungen in der Kfz-Elektronik und Telematik},
  journal   = {Elektronik automotive : Magazin f{\"u}r Entwicklungen in der Kfz-Elektronik und Telematik},
  number    = {H. 9},
  issn      = {1614-0125},
  pages     = {46 -- 51},
  year      = {2008},
  language  = {de}
}
@article{LeidingerNoistenWollert2012,
  author    = {Leidinger, Rafael and Noisten, Thomas and Wollert, J{\"o}rg},
  title     = {Realtime automation networks in moVing industrial environments},
  series = {Journal of systemics, cybernetics and informatics},
  volume    = {Vol. 10},
  journal   = {Journal of systemics, cybernetics and informatics},
  number    = {Iss. 2},
  publisher = {IIIC},
  address   = {Orlando},
  issn      = {1690-4532},
  pages     = {52 -- 56},
  year      = {2012},
  abstract  = {The radio-based wireless data communication has made the realization of new technical solutions possible in many fields of the automation technology (AT). For about ten years, a constant disproportionate growth of wireless technologies can be observed in the automation technology. However, it shows that especially for the AT, conventional technologies of office automation are unsuitable and/or not manageable. The employment of mobile services in the industrial automation technology has the potential of significant cost and time savings. This leads to an increased productivity in various fields of the AT, for example in the factory and process automation or in production logistics. In this paper technologies and solutions for an automation-suited supply of mobile wireless services will be introduced under the criteria of real time suitability, IT-security and service orientation. Emphasis will be put on the investigation and development of wireless convergence layers for different radio technologies, on the central provision of support services for an easy-to-use, central, backup enabled management of combined wired / wireless networks and on the study on integrability in a Profinet real-time Ethernet network.},
  language  = {en}
}