@article{KallweitHelbingOrglmeisteretal.1994,
  author    = {Kallweit, Stephan and Helbing, M. and Orglmeister, R. and Siekmann, H. E.},
  title     = {Image Processing Techniques with Neural Networks for Flow Visualization in Rotating Machinery / Helbing, M. ; Orgimeiste, R. [Orglmeister, R.] ; Kallweit, S. ; Siekmann, H. E. ; Dues, M. ; Cronemeyer, J.},
  series = {FLUCOME '94 : the 4th Triennial International Symposium on Fluid Control, Measurement and Visualization; August 29 - September 1, 1994, Toulouse, France, International Congress Centre, DIGORA-Lab{\`e}ge / CERT/ONERA. General chairman Patrick Hebrard},
  journal   = {FLUCOME '94 : the 4th Triennial International Symposium on Fluid Control, Measurement and Visualization; August 29 - September 1, 1994, Toulouse, France, International Congress Centre, DIGORA-Lab{\`e}ge / CERT/ONERA. General chairman Patrick Hebrard},
  address   = {Toulouse},
  pages     = {87 -- 94},
  year      = {1994},
  language  = {en}
}
@article{KallweitKaminskyRossietal.2005,
  author    = {Kallweit, Stephan and Kaminsky, R. and Rossi, M. and Morbiducci, U.},
  title     = {Time resolved PIV technique for high temporal resolution measurements of prosthetic heart valves fluid dynamics / Kaminsky, R. ; Rossi, M. ; Morbiducci, U. ; Scalise, L. ; Catellini, P. ; Kallweit, S. ; Verdonck, P. ; Grigioni, M.},
  series = {The International Journal of Artificial Organs. 28 (2005), H. 9},
  journal   = {The International Journal of Artificial Organs. 28 (2005), H. 9},
  isbn      = {1724-6040},
  pages     = {946},
  year      = {2005},
  language  = {en}
}
@article{KallweitKaminskyRossietal.2005,
  author    = {Kallweit, Stephan and Kaminsky, R. and Rossi, M. and Morbiducci, U.},
  title     = {2D PIV Study of the flow downstream : Two prototypes of a ney monoleaflet artificial aortic heart valve prosthesis / Kaminsky, R. ; Kramm, K. ; Weber, H. J. ; Simons, A. P. ; Kallweit, S. ; Verdonck, P. R.},
  series = {The International Journal of Artificial Organs. 28 (2005), H. 9},
  journal   = {The International Journal of Artificial Organs. 28 (2005), H. 9},
  isbn      = {1724-6040},
  pages     = {921},
  year      = {2005},
  language  = {en}
}
@article{KallweitKaminskyRossietal.2005,
  author    = {Kallweit, Stephan and Kaminsky, R. and Rossi, M. and Morbiducci, U.},
  title     = {3D PIV measurements of prosthetic heart valve dynamics / Kaminsky, R. ; Rossi, M. ; Morbiducci, U. ; Scalise, L. ; Castellini, P. ; Kallweit, S. ; Verdonck, P. ; Grigioni, M.},
  series = {The International Journal of Artificial Organs. 28 (2005), H. 9},
  journal   = {The International Journal of Artificial Organs. 28 (2005), H. 9},
  isbn      = {1724-6040},
  pages     = {868},
  year      = {2005},
  language  = {en}
}
@article{KallweitKaminskyRossietal.2005,
  author    = {Kallweit, Stephan and Kaminsky, R. and Rossi, M. and Scalise, L.},
  title     = {PIV Measurements with high temporal Resolution behind Artificial Heart Valves / Kaminsky, R. ; Rossi, M. ; Scalise, L. ; Kallweit, S. ; Verdonck, P.},
  series = {Proceedings of the 6th International Symposium on Particle Image Velocimetry},
  journal   = {Proceedings of the 6th International Symposium on Particle Image Velocimetry},
  publisher = {Caltech},
  address   = {Pasadena, CA},
  year      = {2005},
  language  = {en}
}
@article{KallweitKaminskyRossietal.2008,
  author    = {Kallweit, Stephan and Kaminsky, Radoslav and Rossi, Massimiliano and Morbiducci, Umberto},
  title     = {PIV Measurements of Flows in Artificial Heart Valves / Kaminsky, Radoslav ; Kallweit, Stephan ; Rossi, Massimiliano ; Morbiducci, Umberto ; Scalise, Lorenzo},
  series = {Particle Image Velocimetry - New Developments and Recent Applications},
  journal   = {Particle Image Velocimetry - New Developments and Recent Applications},
  isbn      = {978-3-540-73528-1},
  pages     = {55 -- 72},
  year      = {2008},
  language  = {en}
}
@article{KallweitSchimpf2003,
  author    = {Kallweit, Stephan and Schimpf, Axel},
  title     = {Photogrammetric Particle Image Velocimetry / Schimpf, Axel ; Kallweit, Stephan},
  series = {Particle image velocimetry : recent improvements; proceedings of the Europiv 2 Workshop held in Zaragoza, Spain, March 31 - April 1, 2003 / edited by M. Stanislas ...},
  journal   = {Particle image velocimetry : recent improvements; proceedings of the Europiv 2 Workshop held in Zaragoza, Spain, March 31 - April 1, 2003 / edited by M. Stanislas ...},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {3-540-21423-2},
  pages     = {295},
  year      = {2003},
  language  = {en}
}
@article{KallweitUchiyamaSiekmann1998,
  author    = {Kallweit, Stephan and Uchiyama, R. and Siekmann, H.},
  title     = {Fault Diagnostic Method for Pump Running Conditions Based on Process Modeling and Neural Network / Uchiyama, R. ; Kallweit, S. ; Siekmann, H.},
  series = {International Journal of Rotating Machinery. 4 (1998), H. 1},
  journal   = {International Journal of Rotating Machinery. 4 (1998), H. 1},
  isbn      = {1542-3034},
  pages     = {49 -- 59},
  year      = {1998},
  language  = {en}
}
@article{KallweitVanlanduitVanherzeeleetal.2007,
  author    = {Kallweit, Stephan and Vanlanduit, S. and Vanherzeele, J. and Brouns, M.},
  title     = {Time resolved PIV reconstruction of periodic flows / Vanlanduit, S. ; Vanherzeele, J. ; Kallweit, S. ; Brouns, M. ; Guillaume, P.},
  series = {PIV'07, 7th International Symposium on Particle Image Velocimetry, Roma, IT, Sep 11-14, 2007},
  journal   = {PIV'07, 7th International Symposium on Particle Image Velocimetry, Roma, IT, Sep 11-14, 2007},
  pages     = {1 -- 14},
  year      = {2007},
  language  = {en}
}
@article{KallweitWillertDuesetal.2008,
  author    = {Kallweit, Stephan and Willert, Chris and Dues, Michael and M{\"u}ller, Ulrich},
  title     = {PIV for Volume Flow Metering / Kallweit, Stephan ; Willert, Chris ; Dues, Michael ; M{\"u}ller, Ulrich ; Lederer, Thomas},
  pages     = {6 S.},
  year      = {2008},
  language  = {en}
}
@article{KesslerBalcGebhardtetal.2015,
  author    = {Kessler, Julia and Balc, Nicolae and Gebhardt, Andreas and Abbas, Karim},
  title     = {Basic Research on Lattice Structures Focused on the Tensile Strength},
  series = {Applied Mechanics and Materials},
  volume    = {Vol. 808},
  journal   = {Applied Mechanics and Materials},
  publisher = {Trans Tech Publications},
  address   = {B{\"a}ch},
  issn      = {1662-7482},
  doi       = {10.4028/www.scientific.net/AMM.808.193},
  pages     = {193 -- 198},
  year      = {2015},
  language  = {en}
}
@article{KilicRaatschenKoerfgenetal.2017,
  author    = {Kilic, S. A. and Raatschen, Hans-J{\"u}rgen and K{\"o}rfgen, B. and Apaydin, N. M. and Astaneh-Asl, A.},
  title     = {FE Model of the Fatih Sultan Mehmet Suspension Bridge Using Thin Shell Finite Elements},
  series = {Arabian Journal for Science and Engineering},
  volume    = {42},
  journal   = {Arabian Journal for Science and Engineering},
  number    = {3},
  publisher = {Springer Nature},
  issn      = {2191-4281},
  doi       = {10.1007/s13369-016-2316-y},
  pages     = {1103 -- 1116},
  year      = {2017},
  abstract  = {This paper presents the results of an eigenvalue analysis of the Fatih Sultan Mehmet Bridge. A high-resolution finite element model was created directly from the available design documents. All physical properties of the structural components were included in detail, so no calibration to the measured data was necessary. The deck and towers were modeled with shell elements. A nonlinear static analysis was performed before the eigenvalue calculation. The calculated natural frequencies and corresponding mode shapes showed good agreement with the available measured ambient vibration data. The calculation of the effective modal mass showed that nine modes had single contributions higher than 5 \% of the total mass. They were in a frequency range up to 1.2 Hz. The comparison of the results for the torsional modes especially demonstrated the advantage of using thin shell finite elements over the beam modeling approach.},
  language  = {en}
}
@article{Klocke1995,
  author    = {Klocke, Martina},
  title     = {Study Units in the CIM-Oriented Study Factory},
  series = {Qualification for Computer-Integrated Manufacturing. Hrsg.: Felix Rauner},
  journal   = {Qualification for Computer-Integrated Manufacturing. Hrsg.: Felix Rauner},
  publisher = {Springer},
  address   = {Berlin [u.a.]},
  isbn      = {3-540-19971-3},
  pages     = {38 -- 51},
  year      = {1995},
  language  = {en}
}
@article{KosterScheidweilerTieves2016,
  author    = {Koster, Arie and Scheidweiler, Robert and Tieves, Martin},
  title     = {A flow based pruning scheme for enumerative equitable coloring algorithms},
  series = {A flow based pruning scheme for enumerative equitable coloring algorithms},
  journal   = {A flow based pruning scheme for enumerative equitable coloring algorithms},
  doi       = {10.48550/arXiv.1607.08754},
  pages     = {1 -- 30},
  year      = {2016},
  abstract  = {An equitable graph coloring is a proper vertex coloring of a graph G where the sizes of the color classes differ by at most one. The equitable chromatic number is the smallest number k such that G admits such equitable k-coloring. We focus on enumerative algorithms for the computation of the equitable coloring number and propose a general scheme to derive pruning rules for them: We show how the extendability of a partial coloring into an equitable coloring can be modeled via network flows. Thus, we obtain pruning rules which can be checked via flow algorithms. Computational experiments show that the search tree of enumerative algorithms can be significantly reduced in size by these rules and, in most instances, such naive approach even yields a faster algorithm. Moreover, the stability, i.e., the number of solved instances within a given time limit, is greatly improved. Since the execution of flow algorithms at each node of a search tree is time consuming, we derive arithmetic pruning rules (generalized Hall-conditions) from the network model. Adding these rules to an enumerative algorithm yields an even larger runtime improvement.},
  language  = {en}
}
@article{KunkelGebhardtMpofuetal.2018,
  author    = {Kunkel, Maximilian Hugo and Gebhardt, Andreas and Mpofu, Khumbaulani and Kallweit, Stephan},
  title     = {Statistical assessment of mechanical properties of selective laser melted specimens of stainless steel},
  series = {The International Journal of Advanced Manufacturing Technology},
  volume    = {98},
  journal   = {The International Journal of Advanced Manufacturing Technology},
  number    = {5-8},
  publisher = {Springer},
  address   = {London},
  issn      = {0268-3768},
  doi       = {10.1007/s00170-018-2040-8},
  pages     = {1409 -- 1431},
  year      = {2018},
  abstract  = {The rail business is challenged by long product life cycles and a broad spectrum of assembly groups and single parts. When spare part obsolescence occurs, quick solutions are needed. A reproduction of obsolete parts is often connected to long waiting times and minimum lot quantities that need to be purchased and stored. Spare part storage is therefore challenged by growing stocks, bound capital and issues of part ageing. A possible solution could be a virtual storage of spare parts which will be 3D printed through additive manufacturing technologies in case of sudden demand. As mechanical properties of additive manufactured parts are neither guaranteed by machine manufacturers nor by service providers, the utilization of this relatively young technology is impeded and research is required to address these issues. This paper presents an examination of mechanical properties of specimens manufactured from stainless steel through the selective laser melting (SLM) process. The specimens were produced in multiple batches. This paper interrogates the question if the test results follow a normal distribution pattern and if mechanical property predictions can be made. The results will be put opposite existing threshold values provided as the industrial standard. Furthermore, probability predictions will be made in order to examine the potential of the SLM process to maintain state-of-the-art mechanical property requirements.},
  language  = {en}
}
@article{KunkelGebhardtMpofuetal.2019,
  author    = {Kunkel, Maximilian Hugo and Gebhardt, Andreas and Mpofu, Khumbulani and Kallweit, Stephan},
  title     = {Quality assurance in metal powder bed fusion via deep-learning-based image classification},
  series = {Rapid Prototyping Journal},
  volume    = {26},
  journal   = {Rapid Prototyping Journal},
  number    = {2},
  issn      = {1355-2546},
  doi       = {10.1108/RPJ-03-2019-0066},
  pages     = {259 -- 266},
  year      = {2019},
  language  = {en}
}
@article{Kaemper1996,
  author    = {K{\"a}mper, Klaus-Peter},
  title     = {Development of low-cost injection moulded micropumps. Entwicklung von kosteng{\"u}nstigen, mittels Spritzguß hergestellten Mikropumpen / D{\"o}pper, J. (u.a.)},
  series = {Actuator 96 : Conference Proceedings ; 5th International Conference on New Actuators ; 26- 28 June, Bremen, Germany / Ed.: Hubert Borgmann. Publ. by: AXON Technology Consult GmbH},
  journal   = {Actuator 96 : Conference Proceedings ; 5th International Conference on New Actuators ; 26- 28 June, Bremen, Germany / Ed.: Hubert Borgmann. Publ. by: AXON Technology Consult GmbH},
  address   = {Bremen},
  pages     = {37 -- 40},
  year      = {1996},
  language  = {en}
}
@article{Kaemper2003,
  author    = {K{\"a}mper, Klaus-Peter},
  title     = {Education and Training in MST. K{\"a}mper, K.-P.; Picard, A.; Brill, M.; Cassel, D.; Jentsch, A.; Merten, S.; Rollwa, M.},
  series = {Mst-News (2003)},
  journal   = {Mst-News (2003)},
  isbn      = {0948-3128},
  pages     = {35},
  year      = {2003},
  language  = {en}
}
@article{KaemperAbrahamHopster1992,
  author    = {K{\"a}mper, Klaus-Peter and Abraham, D. L. and Hopster, H.},
  title     = {Spin-polarized electron-energy-loss spectroscopy on epitaxial fcc Co layers on Cu(001)},
  series = {Physical Review B. 45 (1992), H. 24},
  journal   = {Physical Review B. 45 (1992), H. 24},
  isbn      = {1095-3795},
  pages     = {14335 -- 14346},
  year      = {1992},
  language  = {en}
}
@article{KaemperAbrahamEhrfeldetal.1998,
  author    = {K{\"a}mper, Klaus-Peter and Abraham, M. and Ehrfeld, W. and Hessel, V.},
  title     = {Microsystem technology: Between research and industrial application. Abraham, M.; Ehrfeld, W.; Hessel, V.; K{\"a}mper, K.-P.; Lacher, M.; Picard, A.},
  series = {Microelectronic Engineering. 41-42 (1998)},
  journal   = {Microelectronic Engineering. 41-42 (1998)},
  isbn      = {0167-9317},
  pages     = {47 -- 52},
  year      = {1998},
  language  = {en}
}
@article{KaemperBergBegemannetal.1998,
  author    = {K{\"a}mper, Klaus-Peter and Berg, U. and Begemann, M. and Hagemann, B. (u.a.)},
  title     = {Series production and testing of a micro motor. Serienfertigung und Pr{\"u}fung eines Mikromotors},
  series = {Actuator 98 : 6th International Conference on New Actuators ; 17 - 19 June, 1998, Bremen, Germany ; conference proceedings / ed.: Hubert Borgmann ...},
  journal   = {Actuator 98 : 6th International Conference on New Actuators ; 17 - 19 June, 1998, Bremen, Germany ; conference proceedings / ed.: Hubert Borgmann ...},
  publisher = {Messe Bremen},
  address   = {Bremen},
  isbn      = {3-933339-00-6},
  pages     = {552 -- 555},
  year      = {1998},
  language  = {en}
}
@article{KaemperDoepperClemensetal.1997,
  author    = {K{\"a}mper, Klaus-Peter and D{\"o}pper, J. and Clemens, M. and Ehrfeld, W.},
  title     = {Micro gear pumps for dosing of viscous fluids. / D{\"o}pper, J. (u.a.)},
  series = {Journal of Micromechanics and Microengineering. 7 (1997), H. 3},
  journal   = {Journal of Micromechanics and Microengineering. 7 (1997), H. 3},
  isbn      = {0960-1317},
  pages     = {230 -- 232},
  year      = {1997},
  language  = {en}
}
@article{KaemperDoepperEhrfeldetal.1995,
  author    = {K{\"a}mper, Klaus-Peter and D{\"o}pper, J. and Ehrfeld, W. and Hagemann, B.},
  title     = {Simulation supported design of LIGA Microsystems. K{\"a}mper, K.-P.; D{\"o}pper, J.; Ehrfeld, W.; Hagemann, B.; Hill, S.D.J.; Lehr, H.},
  series = {Simulation and design of microsystems and microstructures : [... contains the papers presented at the First International Conference on the Simulation and Design of Microsystems and Microstructures, MicroSIM '95, which was held in Southampton, UK, in September 1995] / [organised by: Wessex Institute of Technology, UK]. Ed.: R. A. Adey},
  journal   = {Simulation and design of microsystems and microstructures : [... contains the papers presented at the First International Conference on the Simulation and Design of Microsystems and Microstructures, MicroSIM '95, which was held in Southampton, UK, in September 1995] / [organised by: Wessex Institute of Technology, UK]. Ed.: R. A. Adey},
  publisher = {Computational Mechanics Publ.},
  address   = {Southampton [u.a.]},
  isbn      = {1-85312-390-0},
  pages     = {3 -- 10},
  year      = {1995},
  language  = {en}
}
@article{KaemperDoepperEhrfeldetal.1995,
  author    = {K{\"a}mper, Klaus-Peter and D{\"o}pper, J. and Ehrfeld, W. and Hagemann, B.},
  title     = {An investigation of computer modelling for micro-injection moulding. Hill, S.D.J.; K{\"a}mper, K.-P.; Dasbach, U.; D{\"o}pper, J.; Ehrfeld, W.; Kaupert, M.},
  series = {Simulation and design of microsystems and microstructures : [... contains the papers presented at the First International Conference on the Simulation and Design of Microsystems and Microstructures, MicroSIM '95, which was held in Southampton, UK, in September 1995] / [organised by: Wessex Institute of Technology, UK]. Ed.: R. A. Adey},
  journal   = {Simulation and design of microsystems and microstructures : [... contains the papers presented at the First International Conference on the Simulation and Design of Microsystems and Microstructures, MicroSIM '95, which was held in Southampton, UK, in September 1995] / [organised by: Wessex Institute of Technology, UK]. Ed.: R. A. Adey},
  publisher = {Computational Mechanics Publ.},
  address   = {Southampton [u.a.]},
  isbn      = {1-85312-390-0},
  pages     = {275},
  year      = {1995},
  language  = {en}
}
@article{KaemperDoepperEhrfeldetal.1998,
  author    = {K{\"a}mper, Klaus-Peter and D{\"o}pper, J. and Ehrfeld, W. and Oberbeck, S.},
  title     = {A self-filling low-cost membrane micropump},
  series = {Proceedings : an investigation of micro structures, sensors, actuators, machines and systems / sponsored by the IEEE Robotics and Automation Society in cooperation with the ASME Dynamic Systems and Control Division},
  journal   = {Proceedings : an investigation of micro structures, sensors, actuators, machines and systems / sponsored by the IEEE Robotics and Automation Society in cooperation with the ASME Dynamic Systems and Control Division},
  publisher = {IEEE Service Center},
  address   = {Piscataway, NJ},
  isbn      = {078034412X},
  pages     = {432 -- 437},
  year      = {1998},
  language  = {en}
}
@article{KaemperEhrfeldDoepperetal.1997,
  author    = {K{\"a}mper, Klaus-Peter and Ehrfeld, W. and D{\"o}pper, J. and Hessel, V.},
  title     = {Microfluidic components for biological and chemical microreactors. K{\"a}mper, K.-P.; Ehrfeld, W.; D{\"o}pper, J.; Hessel, V.; Lehr, H.; L{\"o}we, H.; Richter, T.; Wolf, A.},
  series = {Proceedings : an investigation of micro structures, sensors, actuators, machines and robots ; Nagoya, Japan, January 26 - 30, 1997 / IEEE Robotics and Automation Society ...},
  journal   = {Proceedings : an investigation of micro structures, sensors, actuators, machines and robots ; Nagoya, Japan, January 26 - 30, 1997 / IEEE Robotics and Automation Society ...},
  publisher = {IEEE Service Center},
  address   = {Piscataway, NJ},
  isbn      = {0-7803-3744-1},
  pages     = {338 -- 343},
  year      = {1997},
  language  = {en}
}
@article{KaemperEhrfeldHagemannetal.1996,
  author    = {K{\"a}mper, Klaus-Peter and Ehrfeld, W. and Hagemann, B. and Lehr, H.},
  title     = {Electromagnetic permanent magnet micromotor with integrated micro gear box. K{\"a}mper, K.-P.; Ehrfeld, W.; Hagemann, B.; Lehr, H.; Michel, F.; Schirling, A.; Th{\"u}rigen, C.; Wittig, T.},
  series = {Actuator 96 : Conference Proceedings ; 5th International Conference on New Actuators ; 26- 28 June, Bremen, Germany / Ed.: Hubert Borgmann. Publ. by: AXON Technology Consult GmbH},
  journal   = {Actuator 96 : Conference Proceedings ; 5th International Conference on New Actuators ; 26- 28 June, Bremen, Germany / Ed.: Hubert Borgmann. Publ. by: AXON Technology Consult GmbH},
  address   = {Bremen},
  pages     = {429},
  year      = {1996},
  language  = {en}
}
@article{KaemperEhrfeldHesseletal.1997,
  author    = {K{\"a}mper, Klaus-Peter and Ehrfeld, W. and Hessel, V. and Lacher, M.},
  title     = {Market oriented development and production of microdevices. Ehrfeld, W.; Hessel, V.; K{\"a}mper, K.-P.; Lacher, M.; Picard, A.; Schmidt, M.; Schulz, C.},
  series = {Proceedings : 21th International Conference on Microelectronics : MIEL '97 ; Niš, Yugoslavia, 14-17 September 1997. Vol. 1},
  journal   = {Proceedings : 21th International Conference on Microelectronics : MIEL '97 ; Niš, Yugoslavia, 14-17 September 1997. Vol. 1},
  publisher = {IEEE Service Center},
  address   = {Piscataway, NJ},
  isbn      = {0-7803-3664-X},
  pages     = {71 -- 79},
  year      = {1997},
  language  = {en}
}
@article{KaemperHagemannLehretal.1995,
  author    = {K{\"a}mper, Klaus-Peter and Hagemann, B. and Lehr, H. and Michel, F.},
  title     = {LIGA Example 2: Electromagnetic Micromotor. Hagemann, B.; K{\"a}mper, K.-P.; Lehr, H.; Michel, F.; Th{\"u}rigen, C.},
  series = {LIGA technique / Hans-Dieter Bauer (ed.). [Developed by UETP-MEMS, University Training Partnership for Micro-Electro-Mechanical Systems ...]. - 2.ed.},
  journal   = {LIGA technique / Hans-Dieter Bauer (ed.). [Developed by UETP-MEMS, University Training Partnership for Micro-Electro-Mechanical Systems ...]. - 2.ed.},
  publisher = {FSRM},
  address   = {Neuchatel},
  pages     = {100 -- 110},
  year      = {1995},
  language  = {en}
}
@article{KaemperKurzawaSchmittetal.1986,
  author    = {K{\"a}mper, Klaus-Peter and Kurzawa, R. and Schmitt, W. and G{\"u}ntherodt, G.},
  title     = {Spin-resolved photoemission study of in situ grown epitaxial Fe layers on W(110). Kurzawa, R.; K{\"a}mper, K.-P.; Schmitt, W.; G{\"u}ntherodt, G.},
  series = {Solid State Communications. 60 (1986), H. 10},
  journal   = {Solid State Communications. 60 (1986), H. 10},
  isbn      = {0038-1098},
  pages     = {777 -- 780},
  year      = {1986},
  language  = {en}
}
@article{KaemperLehrAbeletal.1996,
  author    = {K{\"a}mper, Klaus-Peter and Lehr, H. and Abel, S. and D{\"o}pper, J.},
  title     = {Microactuators as driving units for microrobotic systems. Herstellung von Mikroaktoren mit dem LIGA-Verfahren f{\"u}r Mikroroboter / Lehr, H.; Abel, S.; D{\"o}pper, J.; Ehrfeld, W.; Hagemann, B.; K{\"a}mper, K.-P.; Michel, F.; Schulu, c.; Th{\"u}rigen, C.},
  series = {Proceedings of the SPIE - The International Society for Optical Engineering},
  journal   = {Proceedings of the SPIE - The International Society for Optical Engineering},
  isbn      = {0277-786X},
  pages     = {202 -- 210},
  year      = {1996},
  language  = {en}
}
@article{KaemperLehrAbeletal.1995,
  author    = {K{\"a}mper, Klaus-Peter and Lehr, H. and Abel, S. and Ehrfeld, W.},
  title     = {Assembly of Electromagnetic Milliactuators with LIGA Components. Lehr, H.; Abel, S.; Ehrfeld, W.; Hagemann, B.; K{\"a}mper, K.-P.; Michel, F.; Th{\"u}rigen, C.},
  series = {Proceedings 2nd Japan-France Congress on Mechatronics, Takamatsu (Kagawa, Japan) 1.-3. November 1994, 31 (1994)},
  journal   = {Proceedings 2nd Japan-France Congress on Mechatronics, Takamatsu (Kagawa, Japan) 1.-3. November 1994, 31 (1994)},
  publisher = {Fuji Technology Press},
  pages     = {31 -- 31},
  year      = {1995},
  language  = {en}
}
@article{KaemperLehrEhrfeldetal.1997,
  author    = {K{\"a}mper, Klaus-Peter and Lehr, H. and Ehrfeld, W. and Hagemann, B.},
  title     = {Development of micro and millimotors. Lehr, H.; Ehrfeld, W.; Hagemann, B.; K{\"a}mper, K.-P.; Michel, F.; Schulz, C.; Th{\"u}rigen C.},
  series = {Minimally Invasive Therapy and Allied Technologies. 6 (1997)},
  journal   = {Minimally Invasive Therapy and Allied Technologies. 6 (1997)},
  isbn      = {1364-5706},
  year      = {1997},
  language  = {en}
}
@article{KaemperLehrEhrfeldetal.1994,
  author    = {K{\"a}mper, Klaus-Peter and Lehr, H. and Ehrfeld, W. and Michel, F.},
  title     = {LIGA Components for the Construction of Milliactuators. Lehr, H.; Ehrfeld, W.; K{\"a}mper, K.-P.; Michel, F.; Schmidt, M.},
  series = {1994 IEEE Symposium on Emerging Technologies \& Factory Automation : novel disciplines for the next century ; proceedings, November 6 - 10, 1994, Tokyo, Japan / ETFA '94. Hiroyuki Fujita [chairman] ... Sponsored by: Institute of Industrial Science, SEIKEN},
  journal   = {1994 IEEE Symposium on Emerging Technologies \& Factory Automation : novel disciplines for the next century ; proceedings, November 6 - 10, 1994, Tokyo, Japan / ETFA '94. Hiroyuki Fujita [chairman] ... Sponsored by: Institute of Industrial Science, SEIKEN},
  address   = {Piscataway, N.J.},
  isbn      = {0780321146},
  pages     = {43 -- 47},
  year      = {1994},
  language  = {en}
}
@article{KaemperPappasHopster1990,
  author    = {K{\"a}mper, Klaus-Peter and Pappas, D. P. and Hopster, H.},
  title     = {Reversible transition between perpendicular and in-plane magnetization in ultrathin films. Pappas, D. P.; K{\"a}mper, K.-P.; Hopster, H.},
  series = {Physical Review Letters. 64 (1990), H. 26},
  journal   = {Physical Review Letters. 64 (1990), H. 26},
  isbn      = {1079-7114},
  pages     = {3179 -- 3182},
  year      = {1990},
  language  = {en}
}
@article{KaemperPappasMilleretal.1991,
  author    = {K{\"a}mper, Klaus-Peter and Pappas, D. P. and Miller, B. P. and Hopster, H.},
  title     = {Spin-dependent electron attenuation by transmission through thin ferromagnetic films . Pappas, D. P.; K{\"a}mper,K.-P.; Miller, B. P.; Hopster, H.; Fowler, D. E.; Brundle, C. R.; Luntz, A. C.; Shen, Z.-X.},
  series = {Physical Review Letters. 66 (1991), H. 4},
  journal   = {Physical Review Letters. 66 (1991), H. 4},
  isbn      = {1079-7114},
  pages     = {504 -- 507},
  year      = {1991},
  language  = {en}
}
@article{KaemperPappasMilleretal.1991,
  author    = {K{\"a}mper, Klaus-Peter and Pappas, D. P. and Miller, B. P. and Hopster, H.},
  title     = {Magnetism of ultrathin films of Fe on Cu(100). Pappas, D. P; K{\"a}mper, K.-P.; Miller, B. P.; Hopster, H.; Fowler, D. E.; Luntz, A. C.; Brundle, C.R.; Shen, Z.-X.},
  series = {Journal of Applied Physics. 69 (1991), H. 8},
  journal   = {Journal of Applied Physics. 69 (1991), H. 8},
  isbn      = {1089-7550},
  pages     = {5209 -- 521},
  year      = {1991},
  language  = {en}
}
@article{KaemperPicardSchuetzeetal.2006,
  author    = {K{\"a}mper, Klaus-Peter and Picard, A. and Sch{\"u}tze, A. and Wallach, D.},
  title     = {Adopting the Foundry Concept of Semiconductor Fabrication on Educational Schemes and the Virtual Technology Lab (VTL). Picard, A.; K{\"a}mper, K.-P.; Sch{\"u}tze, A.; Wallach, D.; Walter, T.},
  series = {Mst-News (2006)},
  journal   = {Mst-News (2006)},
  isbn      = {0948-3128},
  pages     = {15, 16 -- u. 35},
  year      = {2006},
  language  = {en}
}
@article{KaemperPicardBrilletal.2003,
  author    = {K{\"a}mper, Klaus-Peter and Picard, Antoni and Brill, Manfred and Cassel, Detlef (u.a.)},
  title     = {The Virtual Cleanroom - a new tool in teaching MST process technologies},
  series = {mst news International newsletter on micro - nano Integration (2003)},
  journal   = {mst news International newsletter on micro - nano Integration (2003)},
  isbn      = {0948-3128},
  pages     = {35 -- 36},
  year      = {2003},
  language  = {en}
}
@article{KaemperPicardBrilletal.2003,
  author    = {K{\"a}mper, Klaus-Peter and Picard, Antoni and Brill, Manfred and Cassel, Detlev and Jentsch, Andreas and Merten, Sabine and Rollwa, Markus},
  title     = {The Virtual Clean Room - a new tool in teaching MST process technologies},
  year      = {2003},
  abstract  = {The Virtual Clean Room - a new tool in teaching MST process technologies University education in high-technology fields like MST is not complete without intensive laboratory sessions. Students cannot fully grasp the complexity and the special problems related to the manufacturing of microsystems without a thorough hands-on experience in a MST clean room.},
  subject      = {Virtuelle Maschine},
  language  = {en}
}
@article{KaemperSchmittGuentherodt1987,
  author    = {K{\"a}mper, Klaus-Peter and Schmitt, W. and G{\"u}ntherodt, G.},
  title     = {The influence of adsorbates on the spin-resolved photoemission of Ni(110). Schmitt, W.; K{\"a}mper, K.-P.; G{\"u}ntherodt, G.},
  series = {Surface Science. 189/190 (1987)},
  journal   = {Surface Science. 189/190 (1987)},
  isbn      = {0039-6028},
  pages     = {741 -- 507},
  year      = {1987},
  language  = {en}
}
@article{KaemperSchmittGuentherodt1987,
  author    = {K{\"a}mper, Klaus-Peter and Schmitt, W. and G{\"u}ntherodt, G.},
  title     = {Effect of adsorbates on the spin-polarized photoemission of itinerant ferromagnets. Schmitt, W.; K{\"a}mper, K.-P.; G{\"u}ntherodt, G.},
  series = {Physical Review B. 36 (1987), H. 7},
  journal   = {Physical Review B. 36 (1987), H. 7},
  isbn      = {1095-3795},
  pages     = {3763 -- 3768},
  year      = {1987},
  language  = {en}
}
@article{KaemperSchmittGuentherodt1988,
  author    = {K{\"a}mper, Klaus-Peter and Schmitt, W. and G{\"u}ntherodt, G.},
  title     = {Thickness dependence of the electronic structure of ultrathin, epitaxial Ni(111)/W(110) layers.},
  series = {Physical Review B. 38 (1988), H. 14},
  journal   = {Physical Review B. 38 (1988), H. 14},
  isbn      = {1095-3795},
  pages     = {9451 -- 9456},
  year      = {1988},
  language  = {en}
}
@article{KaemperSchmittGuentherodt1990,
  author    = {K{\"a}mper, Klaus-Peter and Schmitt, W. and G{\"u}ntherodt, G.},
  title     = {Temperature and wave-vector dependence of the spin-split band structure of Ni(111) along the \&\#915;-L line},
  series = {Physical Review B. 42 (1990), H. 16},
  journal   = {Physical Review B. 42 (1990), H. 16},
  isbn      = {1095-3795},
  pages     = {10696 -- 10705},
  year      = {1990},
  language  = {en}
}
@article{KaemperSchmittGuentherodt1988,
  author    = {K{\"a}mper, Klaus-Peter and Schmitt, W. and G{\"u}ntherodt, G.},
  title     = {Temperature dependence of the exchange splitting of Ni along the \&\#61511;-L line},
  series = {Journal de physique. 49 (1988), H. 12. Supplement, Colloque C8},
  journal   = {Journal de physique. 49 (1988), H. 12. Supplement, Colloque C8},
  pages     = {39 -- 40},
  year      = {1988},
  language  = {en}
}
@article{KaemperSchmittGuentherodtetal.1987,
  author    = {K{\"a}mper, Klaus-Peter and Schmitt, W. and G{\"u}ntherodt, G. and Gambino, R. J.},
  title     = {CrO2—A New Half-Metallic Ferromagnet? K{\"a}mper, K.-P.; Schmitt, W.; G{\"u}ntherodt, G.; Gambino, R. J., Ruf, R.},
  series = {Physical Review Letters. 59 (1987), H. 24},
  journal   = {Physical Review Letters. 59 (1987), H. 24},
  isbn      = {1079-7114},
  pages     = {2788 -- 2791},
  year      = {1987},
  language  = {en}
}
@article{KaemperSchmittWesneretal.1989,
  author    = {K{\"a}mper, Klaus-Peter and Schmitt, W. and Wesner, D. A. and G{\"u}ntherodt, G.},
  title     = {Thickness dependence of the spin- and angle-resolved photoemission of ultrathin, epitaxial Ni(111)/W(110) layers},
  series = {Applied Physics A: Materials Science and Processing. 49 (1989), H. 6},
  journal   = {Applied Physics A: Materials Science and Processing. 49 (1989), H. 6},
  isbn      = {1432-0630},
  pages     = {573 -- 578},
  year      = {1989},
  language  = {en}
}
@article{KaemperSchulzEhrfeldetal.1994,
  author    = {K{\"a}mper, Klaus-Peter and Schulz, C. and Ehrfeld, W. and Erbel, R.},
  title     = {LIGA Fabricated Microsystems for Medical and Related Applications. Schulz, C.; Ehrfeld, W.; Erbel, R.; K{\"a}mper, K.-P.; Koch, L.; Lehr, H.; Roth, T.},
  series = {3-Day Course on Microengineering in Medicine and Biology and its Applications to Minimally Invasive Techniques for Therapy and Medical Diagnosis : EURO-BME 94; October 5, 6, and 7, 1994, Swiss Federal Institute of Technology, EPFL, Lausanne, Switzerland / [the 1994 EURO-BME Microengineering in Medicine and Biology Training Course. Staff: Christian D. Depeursinge ...]},
  journal   = {3-Day Course on Microengineering in Medicine and Biology and its Applications to Minimally Invasive Techniques for Therapy and Medical Diagnosis : EURO-BME 94; October 5, 6, and 7, 1994, Swiss Federal Institute of Technology, EPFL, Lausanne, Switzerland / [the 1994 EURO-BME Microengineering in Medicine and Biology Training Course. Staff: Christian D. Depeursinge ...]},
  publisher = {REPRO EPFL},
  address   = {Lausanne},
  pages     = {Getr. Z{\"a}hlung : Ill., graph. Darst.},
  year      = {1994},
  language  = {en}
}
@article{LeidingerNoistenWollert2012,
  author    = {Leidinger, Rafael and Noisten, Thomas and Wollert, J{\"o}rg},
  title     = {Realtime automation networks in moVing industrial environments},
  series = {Journal of systemics, cybernetics and informatics},
  volume    = {Vol. 10},
  journal   = {Journal of systemics, cybernetics and informatics},
  number    = {Iss. 2},
  publisher = {IIIC},
  address   = {Orlando},
  issn      = {1690-4532},
  pages     = {52 -- 56},
  year      = {2012},
  abstract  = {The radio-based wireless data communication has made the realization of new technical solutions possible in many fields of the automation technology (AT). For about ten years, a constant disproportionate growth of wireless technologies can be observed in the automation technology. However, it shows that especially for the AT, conventional technologies of office automation are unsuitable and/or not manageable. The employment of mobile services in the industrial automation technology has the potential of significant cost and time savings. This leads to an increased productivity in various fields of the AT, for example in the factory and process automation or in production logistics. In this paper technologies and solutions for an automation-suited supply of mobile wireless services will be introduced under the criteria of real time suitability, IT-security and service orientation. Emphasis will be put on the investigation and development of wireless convergence layers for different radio technologies, on the central provision of support services for an easy-to-use, central, backup enabled management of combined wired / wireless networks and on the study on integrability in a Profinet real-time Ethernet network.},
  language  = {en}
}
@article{LuftBremenLuft2023,
  author    = {Luft, Angela and Bremen, Sebastian and Luft, Nils},
  title     = {A cost/benefit and flexibility evaluation framework for additive technologies in strategic factory planning},
  series = {Processes},
  volume    = {11},
  journal   = {Processes},
  number    = {7},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {2227-9717},
  doi       = {10.3390/pr11071968},
  pages     = {Artikel 1968},
  year      = {2023},
  abstract  = {There is a growing demand for more flexibility in manufacturing to counter the volatility and unpredictability of the markets and provide more individualization for customers. However, the design and implementation of flexibility within manufacturing systems are costly and only economically viable if applicable to actual demand fluctuations. To this end, companies are considering additive manufacturing (AM) to make production more flexible. This paper develops a conceptual model for the impact quantification of AM on volume and mix flexibility within production systems in the early stages of the factory-planning process. Together with the model, an application guideline is presented to help planners with the flexibility quantification and the factory design process. Following the development of the model and guideline, a case study is presented to indicate the potential impact additive technologies can have on manufacturing flexibility Within the case study, various scenarios with different production system configurations and production programs are analyzed, and the impact of the additive technologies on volume and mix flexibility is calculated. This work will allow factory planners to determine the potential impacts of AM on manufacturing flexibility in an early planning stage and design their production systems accordingly.},
  language  = {en}
}