@article{Gaigall2020,
  author    = {Gaigall, Daniel},
  title     = {Rothman-Woodroofe symmetry test statistic revisited},
  series = {Computational Statistics \& Data Analysis},
  volume    = {2020},
  journal   = {Computational Statistics \& Data Analysis},
  number    = {142},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0167-9473},
  doi       = {10.1016/j.csda.2019.106837},
  pages     = {Artikel 106837},
  year      = {2020},
  abstract  = {The Rothman-Woodroofe symmetry test statistic is revisited on the basis of independent but not necessarily identically distributed random variables. The distribution-freeness if the underlying distributions are all symmetric and continuous is obtained. The results are applied for testing symmetry in a meta-analysis random effects model. The consistency of the procedure is discussed in this situation as well. A comparison with an alternative proposal from the literature is conducted via simulations. Real data are analyzed to demonstrate how the new approach works in practice.},
  language  = {en}
}
@article{FrotscherMuanghongDursunetal.2016,
  author    = {Frotscher, Ralf and Muanghong, Danita and Dursun, G{\"o}zde and Goßmann, Matthias and Temiz Artmann, Ayseg{\"u}l and Staat, Manfred},
  title     = {Sample-specific adaption of an improved electro-mechanical model of in vitro cardiac tissue},
  series = {Journal of Biomechanics},
  volume    = {49},
  journal   = {Journal of Biomechanics},
  number    = {12},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0021-9290 (Print)},
  doi       = {10.1016/j.jbiomech.2016.01.039},
  pages     = {2428 -- 2435},
  year      = {2016},
  abstract  = {We present an electromechanically coupled computational model for the investigation of a thin cardiac tissue construct consisting of human-induced pluripotent stem cell-derived atrial, ventricular and sinoatrial cardiomyocytes. The mechanical and electrophysiological parts of the finite element model, as well as their coupling are explained in detail. The model is implemented in the open source finite element code Code_Aster and is employed for the simulation of a thin circular membrane deflected by a monolayer of autonomously beating, circular, thin cardiac tissue. Two cardio-active drugs, S-Bay K8644 and veratridine, are applied in experiments and simulations and are investigated with respect to their chronotropic effects on the tissue. These results demonstrate the potential of coupled micro- and macroscopic electromechanical models of cardiac tissue to be adapted to experimental results at the cellular level. Further model improvements are discussed taking into account experimentally measurable quantities that can easily be extracted from the obtained experimental results. The goal is to estimate the potential to adapt the presented model to sample specific cell cultures.},
  language  = {en}
}
@article{JungMuellerStaat2019,
  author    = {Jung, Alexander and M{\"u}ller, Wolfram and Staat, Manfred},
  title     = {Optimization of the flight technique in ski jumping: the influence of wind},
  number    = {Early view},
  publisher = {Elsevier},
  address   = {Amsterdam},
  doi       = {10.1016/j.jbiomech.2019.03.023},
  year      = {2019},
  language  = {en}
}
@article{HorbachDuongStaat2017,
  author    = {Horbach, Andreas and Duong, Minh Tuan and Staat, Manfred},
  title     = {Modelling of compressible and orthotropic surgical mesh implants based on optical deformation measurement},
  series = {Journal of the mechanical behavior of biomedical materials},
  volume    = {74},
  journal   = {Journal of the mechanical behavior of biomedical materials},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1751-6161},
  doi       = {10.1016/j.jmbbm.2017.06.012},
  pages     = {400 -- 410},
  year      = {2017},
  language  = {en}
}
@article{GrajewskiKoesterTurek2010,
  author    = {Grajewski, Matthias and K{\"o}ster, Michael and Turek, Stefam},
  title     = {Numerical analysis and implementational aspects of a new multilevel grid deformation method},
  series = {Applied Numerical Mathematics},
  volume    = {60},
  journal   = {Applied Numerical Mathematics},
  number    = {8},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0168-9274},
  doi       = {10.1016/j.apnum.2010.03.017},
  pages     = {767 -- 781},
  year      = {2010},
  abstract  = {Recently, we introduced and mathematically analysed a new method for grid deformation (Grajewski et al., 2009) [15] we call basic deformation method (BDM) here. It generalises the method proposed by Liao et al. (Bochev et al., 1996; Cai et al., 2004; Liao and Anderson, 1992) [4], [6], [20]. In this article, we employ the BDM as core of a new multilevel deformation method (MDM) which leads to vast improvements regarding robustness, accuracy and speed. We achieve this by splitting up the deformation process in a sequence of easier subproblems and by exploiting grid hierarchy. Being of optimal asymptotic complexity, we experience speed-ups up to a factor of 15 in our test cases compared to the BDM. This gives our MDM the potential for tackling large grids and time-dependent problems, where possibly the grid must be dynamically deformed once per time step according to the user's needs. Moreover, we elaborate on implementational aspects, in particular efficient grid searching, which is a key ingredient of the BDM.},
  language  = {en}
}
@article{StaatVu2012,
  author    = {Staat, Manfred and Vu, Duc Khoi},
  title     = {Limit analysis of flaws in pressurized pipes and cylindrical vessels Part II: Circumferential defects},
  series = {Engineering Fracture Mechanics ; 97(2013), H. 1},
  volume    = {97},
  journal   = {Engineering Fracture Mechanics ; 97(2013), H. 1},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0013-7944},
  doi       = {10.1016/j.engfracmech.2012.05.017},
  pages     = {314 -- 333},
  year      = {2012},
  abstract  = {Upper and lower bound theorems of limit analyses have been presented in part I of the paper. Part II starts with the finite element discretization of these theorems and demonstrates how both can be combined in a primal-dual optimization problem. This recently proposed numerical method is used to guide the development of a new class of closed-form limit loads for circumferential defects, which show that only large defects contribute to plastic collapse with a rapid loss of strength with increasing crack sizes. The formulae are compared with primal-dual FEM limit analyses and with burst tests. Even closer predictions are obtained with iterative limit load solutions for the von Mises yield function and for the Tresca yield function. Pressure loading of the faces of interior cracks in thick pipes reduces the collapse load of circumferential defects more than for axial flaws. Axial defects have been treated in part I of the paper.},
  language  = {en}
}
@article{PourshahidiEngelmannOffenhaeusseretal.2022,
  author    = {Pourshahidi, Ali Mohammad and Engelmann, Ulrich M. and Offenh{\"a}usser, Andreas and Krause, Hans-Joachim},
  title     = {Resolving ambiguities in core size determination of magnetic nanoparticles from magnetic frequency mixing data},
  series = {Journal of Magnetism and Magnetic Materials},
  volume    = {563},
  journal   = {Journal of Magnetism and Magnetic Materials},
  number    = {In progress, Art. No. 169969},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0304-8853},
  doi       = {10.1016/j.jmmm.2022.169969},
  year      = {2022},
  abstract  = {Frequency mixing magnetic detection (FMMD) has been widely utilized as a measurement technique in magnetic immunoassays. It can also be used for the characterization and distinction (also known as "colourization") of different types of magnetic nanoparticles (MNPs) based on their core sizes. In a previous work, it was shown that the large particles contribute most of the FMMD signal. This leads to ambiguities in core size determination from fitting since the contribution of the small-sized particles is almost undetectable among the strong responses from the large ones. In this work, we report on how this ambiguity can be overcome by modelling the signal intensity using the Langevin model in thermodynamic equilibrium including a lognormal core size distribution fL(dc,d0,σ) fitted to experimentally measured FMMD data of immobilized MNPs. For each given median diameter d0, an ambiguous amount of best-fitting pairs of parameters distribution width σ and number of particles Np with R2 > 0.99 are extracted. By determining the samples' total iron mass, mFe, with inductively coupled plasma optical emission spectrometry (ICP-OES), we are then able to identify the one specific best-fitting pair (σ, Np) one uniquely. With this additional externally measured parameter, we resolved the ambiguity in core size distribution and determined the parameters (d0, σ, Np) directly from FMMD measurements, allowing precise MNPs sample characterization.},
  language  = {en}
}
@article{AchtsnichtSchoenenbornOffenhaeusseretal.2019,
  author    = {Achtsnicht, Stefan and Sch{\"o}nenborn, Kristina and Offenh{\"a}usser, Andreas and Krause, Hans-Joachim},
  title     = {Measurement of the magnetophoretic velocity of different superparamagnetic beads},
  series = {Journal of Magnetism and Magnetic Materials},
  volume    = {477},
  journal   = {Journal of Magnetism and Magnetic Materials},
  number    = {1},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0304-8853},
  doi       = {10.1016/j.jmmm.2018.10.066},
  pages     = {244 -- 248},
  year      = {2019},
  abstract  = {The movement of magnetic beads due to a magnetic field gradient is of great interest in different application fields. In this report we present a technique based on a magnetic tweezers setup to measure the velocity factor of magnetically actuated individual superparamagnetic beads in a fluidic environment. Several beads can be tracked simultaneously in order to gain and improve statistics. Furthermore we show our results for different beads with hydrodynamic diameters between 200 and 1000 nm from diverse manufacturers. These measurement data can, for example, be used to determine design parameters for a magnetic separation system, like maximum flow rate and minimum separation time, or to select suitable beads for fixed experimental requirements.},
  language  = {en}
}
@article{BaringhausGaigall2015,
  author    = {Baringhaus, Ludwig and Gaigall, Daniel},
  title     = {On an independence test approach to the goodness-of-fit problem},
  series = {Journal of Multivariate Analysis},
  volume    = {2015},
  journal   = {Journal of Multivariate Analysis},
  number    = {140},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0047-259X},
  doi       = {10.1016/j.jmva.2015.05.013},
  pages     = {193 -- 208},
  year      = {2015},
  abstract  = {Let X₁,…,Xₙ be independent and identically distributed random variables with distribution F. Assuming that there are measurable functions f:R²→R and g:R²→R characterizing a family F of distributions on the Borel sets of R in the way that the random variables f(X₁,X₂),g(X₁,X₂) are independent, if and only if F∈F, we propose to treat the testing problem H:F∈F,K:F∉F by applying a consistent nonparametric independence test to the bivariate sample variables (f(Xᵢ,Xⱼ),g(Xᵢ,Xⱼ)),1⩽i,j⩽n,i≠j. A parametric bootstrap procedure needed to get critical values is shown to work. The consistency of the test is discussed. The power performance of the procedure is compared with that of the classical tests of Kolmogorov-Smirnov and Cram{\´e}r-von Mises in the special cases where F is the family of gamma distributions or the family of inverse Gaussian distributions.},
  language  = {en}
}
@article{AkimbekovDigelTastambeketal.2024,
  author    = {Akimbekov, Nuraly S. and Digel, Ilya and Tastambek, Kuanysh T. and Kozhahmetova, Marzhan and Sherelkhan, Dinara K. and Tauanov, Zhandos},
  title     = {Hydrogenotrophic methanogenesis in coal-bearing environments: Methane production, carbon sequestration, and hydrogen availability},
  series = {International Journal of Hydrogen Energy},
  volume    = {52},
  journal   = {International Journal of Hydrogen Energy},
  number    = {Part D},
  publisher = {Elsevier},
  address   = {New York},
  issn      = {1879-3487 (online)},
  doi       = {10.1016/j.ijhydene.2023.09.223},
  pages     = {1264 -- 1277},
  year      = {2024},
  abstract  = {Methane is a valuable energy source helping to mitigate the growing energy demand worldwide. However, as a potent greenhouse gas, it has also gained additional attention due to its environmental impacts. The biological production of methane is performed primarily hydrogenotrophically from H2 and CO2 by methanogenic archaea. Hydrogenotrophic methanogenesis also represents a great interest with respect to carbon re-cycling and H2 storage. The most significant carbon source, extremely rich in complex organic matter for microbial degradation and biogenic methane production, is coal. Although interest in enhanced microbial coalbed methane production is continuously increasing globally, limited knowledge exists regarding the exact origins of the coalbed methane and the associated microbial communities, including hydrogenotrophic methanogens. Here, we give an overview of hydrogenotrophic methanogens in coal beds and related environments in terms of their energy production mechanisms, unique metabolic pathways, and associated ecological functions.},
  language  = {en}
}